Age | Commit message (Collapse) | Author |
|
Add a new EXYNOS4 compatible device tree enabled board file. Boards
based on the EXYNOS4 family of SoC's can use this as the machine/board
file. When using this machine fike, a corresponding device tree blob
which describes the board's properties should be supplied at boot time
to the kernel.
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
Add device tree based discovery support for Samsung's rtc controller.
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
Add device tree based discovery support for Samsung's keypad controller.
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
For PL330 dma controllers instantiated from device tree, the channel
lookup is based on phandle of the dma controller and dma request id
specified by the client node. During probe, the private data of each
channel of the controller is set to point to the device node of the
dma controller. The 'chan_id' of the each channel is used as the
dma request id.
Client driver requesting dma channels specify the phandle of the
dma controller and the request id. The pl330 filter function
converts the phandle to the device node pointer and matches that
with channel's private data. If a match is found, the request id
from the client node and the 'chan_id' of the channel is matched.
A channel is found if both the values match.
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Reviewed-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
Add device tree based discovery support for Samsung's uart controller.
Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
As gpio chips get registered, a device tree node which represents the
gpio chip is searched and attached to it. A translate function is also
provided to convert the gpio specifier into actual platform settings
for pin function selection, pull up/down and driver strength settings.
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
[kgene.kim@samsung.com: fixed build error]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
This adds a very simplistic driver to utilize the
CSI2A interface inside the ISS subsystem in OMAP4,
and dump the data to memory.
Tested so far on omap4430sdp w/ ES2.1 GP & w/ ES2.2 EMU.
Check newly added Documentation/video4linux/omap4_camera.txt
for details.
Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
|
|
Signed-off-by: Andy Green <andy.green@linaro.org>
|
|
mapping framework that improves allocations of contiguous memory chunks.
CMA grabs memory on system boot, marks it with CMA_MIGRATE_TYPE and
gives back to the system. Kernel is allowed to allocate movable pages
within CMA's managed memory so that it can be used for example for page
cache when DMA mapping do not use it. On dma_alloc_from_contiguous()
request such pages are migrated out of CMA area to free required
contiguous block and fulfill the request. This allows to allocate large
contiguous chunks of memory at any time assuming that there is enough
free memory available in the system.
This code is heavily based on earlier works by Michal Nazarewicz.
Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
CC: Michal Nazarewicz <mina86@xxxxxxxxxx>
|
|
The hwmon driver is client to omap4 system control module driver.
Signed-off-by: Keerthy <j-keerthy@ti.com>
|
|
This doesn't interact with resizing well, since it doesn't set the
size of the device to the size at the snapshot. It's also an expensive
operation to be synchronous. Rollback can still be done with the
userspace rbd tool.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
|
|
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
They're not currently actively worked on, the hardware being rather
obsolete by now.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
Introduce otg_version field in usb_gadget struct.UDC can advertise
OTG spec version compatibility by setting otg_version field
appropriately. Gadget drivers fill the bcdOTG field in OTG
descriptor based on UDC's OTG version.
Add sysfs file for host_request and UDC returns the same when
HNP polling request arrives from the host.
Signed-off-by: Pavankumar Kondeti <pkondeti@...>
Change-Id: Ic5ea40369159c10e524a13a2d9b1722fb3ee6921
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/13421
Reviewed-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com>
Tested-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com>
USB: gadget: Fix merge 3.x "OTG supplement revision 2.0 updates"
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
|
|
"pubfunctions" is required in the .tmpl file as the compiler uses it.
Adding "pubfunctions" in ux500_usb.tmpl file.
ST-Ericsson ID: NA
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com>
Change-Id: Ic927f2001e9d0fff070a7d7b9b9871c011905aef
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31845
Reviewed-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Documentation from usb.
Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com>
|
|
Change-Id: I5a53335d41ac1ecda02dc61d68a418a0039ebdff
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Adding DocBook documentation for lsm303dlh accelerometer
and magnetometer drivers.
ST-Ericsson ID: 277198
Change-Id: Idfca43aa6ffaa39b7f73d0135dc6d2b01a0a44c6
Signed-off-by: Chethan Krishna N <chethan.krishna@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/23784
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
Conflicts:
Documentation/DocBook/Makefile
|
|
ST-Ericsson ID: 364916
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: -
Change-Id: I86d796e347ce7e8c2f3a9ddf256863ba74449ee8
Signed-off-by: pender01 <peter.enderborg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32841
Reviewed-by: Yvan FILLION <yvan.fillion@stericsson.com>
|
|
Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
|
|
Change documentation to align with header
files and source file renames and move.
Change-Id: I8e67e41e90dfb61255db5e2e84ead09972361c1c
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Moves shrm specific files from arch/arm/mach-ux500/mach/include
and drivers/misc to include/linux/modem/shrm and drivers/modem/shrm
respectively
ST-Ericsson ID: CR329459
Change-Id: I3a08f83e5302429d51eb865ee1c5e4e0ec73e31b
Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/23980
Reviewed-by: QATEST
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Kernle-Doc created for u5500 Mailbox Logical Driver
ST-Ericsson ID: 277198
Change-Id: I6e1298615a3943177fa05342a9ff8215e521fa72
Signed-off-by: Bibek Basu <bibek.basu@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/23718
Reviewed-by: QATEST
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
fix the potential kernel-doc warnings
ST-Ericsson Linux next: -
ST-Ericsson ID: 327425
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: om prakash <omprakash.pal@stericsson.com>
Change-Id: Ibaa302ddbaa8e223b81bd047fceaf7c3b97af491
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/23345
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Reviewed-by: QATEST
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Implementation of ST-Ericsson's force feedback vibrator driver.
ST-Ericsson ID: WP261766
Ref: Commit-id: 3f5213a6837ad774628c20b006958183b2c1932a
Signed-off-by: Avinash A <Avinash.a@stericsson.com>
Change-Id: Iadea56106111af2f7b05b3f74a4aa58cda6721b1
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/29682
Reviewed-by: Avinash A <avinash.a@stericsson.com>
Tested-by: Avinash A <avinash.a@stericsson.com>
|
|
Added the tmpl files for keypad and touchpad drivers
with repect to kernel doc compliance.
ST-Ericsson Linux next: -
ST-Ericsson ID: AP 277198
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ie704c10ff44f2b5b7f3806252cbcdd3d0f91f849
Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/23735
Reviewed-by: QATEST
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
Conflicts:
Documentation/DocBook/Makefile
|
|
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
This patch is based on the following work:
Keypad tc35893: Fix the Keypad Driver interrupt enable/disable
ST-Ericsson ID: ER274519
Author: Ankur Vaish <ankur.vaish@stericsson.com>
Keypad: Disable EV_REP to disable reporting repeated key events
ST-Ericsson Id:ER 264416
Author: Jayeeta Banerjee <jayeeta.banerjee@stericsson.com>
Add support for TC35893 Keypad Controller
ST-Ericsson ID: AP261147
Author: Jayeeta Banerjee <jayeeta.banerjee@stericsson.com>
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Conflicts:
Documentation/DocBook/Makefile
|
|
touchpad driver
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
|
|
The rtc_calibration attribute allows user-space to get and set
the AB8500's RtcCalibration register. The AB8500 will then use the value in
this register to compensate for RTC drift every 60 seconds.
ST Ericsson ID: 362204
Change-Id: I32a4bda5d6cc0812dcb53d721088e8b844c25b46
Signed-off-by: Mark Godfrey <mark.godfrey@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32922
Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com>
|
|
Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
|
|
Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
|
|
Change documentation to align with header
files and source file renames and move.
Change-Id: I8e67e41e90dfb61255db5e2e84ead09972361c1c
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
fix the potential kernel-doc warnings
ST-Ericsson Linux next: -
ST-Ericsson ID: 327425
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: om prakash <omprakash.pal@stericsson.com>
Change-Id: Ibaa302ddbaa8e223b81bd047fceaf7c3b97af491
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/23345
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Reviewed-by: QATEST
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Added ioctl range for HSI char devices to the documentation
Change-Id: I51836e3a2f7bc557b55f83aef8fb3065ccd55324
Signed-off-by: Andras Domokos <andras.domokos@nokia.com>
Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/20581
Reviewed-by: Pawel SZYSZUK <pawel.szyszuk@stericsson.com>
Tested-by: Pawel SZYSZUK <pawel.szyszuk@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Add an entry for HSI in the device-drivers section of
the kernel documentation.
Change-Id: I5b5a25d0798ec50f8aad38f004b232ff2e0cde43
Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/20580
Reviewed-by: Pawel SZYSZUK <pawel.szyszuk@stericsson.com>
Tested-by: Pawel SZYSZUK <pawel.szyszuk@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Common base to export System-on-Chip related informations through sysfs.
Creation of a "socinfo" directory under /sys/.
Creation of SoC information entries.
Signed-off-by: Maxime COQUELIN <maxime.coquelin-nonst@stericsson.com>
Change-Id: I8f9cbccbed07293d26974e9df3bf1102d42e561c
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/18178
Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com>
|
|
Moreover driver documentation is added in DocBook
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
|
|
documentation to DocBook
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
The linux FM driver for CG2900 now supports mono-stereo
transition interrupt from the CG2900. It indicates
stereo to mono transition or vice versa. Support for RDS
Interrupt, Scan Completion Interrupt, CG2900 Reset
Interrupt, etc is also added in this patch.
ST-Ericsson ID: 324264
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I280a2a00a6f58e105d11f3a9f14ea662719c485e
Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30511
Reviewed-by: Johan PALMAEUS <johan.xj.palmaeus@stericsson.com>
Reviewed-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com>
Tested-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com>
|
|
FM radio driver now supports enabling, disabling, setting
parameters for internal Tone Generator and configuring
De-emphasis filter.
ST-Ericsson ID: 281539
ST-Ericsson ID: 317074
Change-Id: I5b4aacee58e7955a2aea52aeda3a99663bad3082
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/11412
Reviewed-by: Pradeep-mmc KUMAR <pradeep-mmc.kumar@stericsson.com>
Tested-by: Pradeep-mmc KUMAR <pradeep-mmc.kumar@stericsson.com>
Reviewed-by: Johan PALMAEUS <johan.xj.palmaeus@stericsson.com>
Reviewed-by: Andreas GUSTAFSSON <andreas.a.gustafsson@stericsson.com>
Reviewed-by: Hemant GUPTA <hemant.gupta@stericsson.com>
Reviewed-by: QATEST
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/24895
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
Tested-by: Said BAGHERI <said.m.bagheri@stericsson.com>
Reviewed-by: Said BAGHERI <said.m.bagheri@stericsson.com>
Conflicts:
include/linux/videodev2.h
|
|
Add support for HCI Raw channel so that CG2900
can be accessed directly from user space.
ST-Ericsson Linux next: Not tested, ER351170
ST-Ericsson ID: 351170
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: If8a2455be32f0eb99f7c0bc7a5cf0e09270fa6af
Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32206
Reviewed-by: Henrik POSSUNG <henrik.possung@stericsson.com>
Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
|
|
This patch adds KernelDoc for the CG2900 driver.
ST-Ericsson ID: 364042
ST-Ericcson FOSS-OUT-ID: Trivial
ST-Ericsson Linux next: 364042
Change-Id: Idccbf196bcf4a9c5f280e3745ce3e72c499dee80
Signed-off-by: Par-Gunnar Hjalmdahl <par-gunnar.p.hjalmdahl@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32035
Reviewed-by: Hemant GUPTA <hemant.gupta@stericsson.com>
|
|
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
Conflicts:
drivers/misc/Makefile
Conflicts:
drivers/misc/Kconfig
drivers/misc/Makefile
|
|
Since commit c5ed63d66f24(tcp: fix three tcp sysctls tuning),
sysctl_max_syn_backlog is determined by tcp_hashinfo->ehash_mask,
and the minimal value is 128, and it will increase in proportion to the
memory of machine.
The original description for tcp_max_syn_backlog and sysctl_max_syn_backlog
are out of date.
Changelog:
V2: update description for sysctl_max_syn_backlog
Signed-off-by: Weiping Pan <panweiping3@gmail.com>
Reviewed-by: Shan Wei <shanwei88@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit dfb09f9b7ab0 ("x86, amd: Avoid cache aliasing penalties
on AMD family 15h") introduced a kernel command line parameter
called 'align_va_addr' which still refers to arguments used in
an earlier version of the patch and which got changed without
updating the documentation. Correct that omission.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Frank Arnold <frank.arnold@amd.com>
Link: http://lkml.kernel.org/r/1321873819-29541-1-git-send-email-bp@amd64.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The location of the btrfs-progs repository has been changed.
This patch updates the documentation accordingly.
Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
|