From 9e29420ddb1331de1f86fe544a460d8f2c6d11c6 Mon Sep 17 00:00:00 2001 From: Sowjanya Komatineni Date: Mon, 27 Jul 2020 13:57:19 -0700 Subject: i2c: tegra: Don't mark VI I2C as IRQ safe runtime PM Tegra VI I2C is part of VE power domain and typically used for camera usecases. VE power domain is not always on and is non-IRQ safe. So, IRQ safe device cannot be attached to a non-IRQ safe domain as it prevents powering off the PM domain and generic power domain driver will warn. Current driver marks all I2C devices as IRQ safe and VI I2C device does not require IRQ safe as it will not be used for atomic transfers. This patch has fix to make VI I2C as non-IRQ safe. Reviewed-by: Dmitry Osipenko Signed-off-by: Sowjanya Komatineni Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-tegra.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 15772964a05f..3be101824e80 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -1750,7 +1750,15 @@ static int tegra_i2c_probe(struct platform_device *pdev) goto unprepare_slow_clk; } - pm_runtime_irq_safe(&pdev->dev); + /* + * VI I2C is in VE power domain which is not always on and not + * an IRQ safe. So, IRQ safe device can't be attached to a non-IRQ + * safe domain as it prevents powering off the PM domain. + * Also, VI I2C device don't need to use runtime IRQ safe as it will + * not be used for atomic transfers. + */ + if (!i2c_dev->is_vi) + pm_runtime_irq_safe(&pdev->dev); pm_runtime_enable(&pdev->dev); if (!pm_runtime_enabled(&pdev->dev)) { ret = tegra_i2c_runtime_resume(&pdev->dev); -- cgit v1.2.3