aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2019-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) More jumbo frame fixes in r8169, from Heiner Kallweit. 2) Fix bpf build in minimal configuration, from Alexei Starovoitov. 3) Use after free in slcan driver, from Jouni Hogander. 4) Flower classifier port ranges don't work properly in the HW offload case, from Yoshiki Komachi. 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin. 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk. 7) Fix flow dissection in dsa TX path, from Alexander Lobakin. 8) Stale syncookie timestampe fixes from Guillaume Nault. [ Did an evil merge to silence a warning introduced by this pull - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) r8169: fix rtl_hw_jumbo_disable for RTL8168evl net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add() r8169: add missing RX enabling for WoL on RTL8125 vhost/vsock: accept only packets with the right dst_cid net: phy: dp83867: fix hfs boot in rgmii mode net: ethernet: ti: cpsw: fix extra rx interrupt inet: protect against too small mtu values. gre: refetch erspan header from skb->data after pskb_may_pull() pppoe: remove redundant BUG_ON() check in pppoe_pernet tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE() tcp: tighten acceptance of ACKs not matching a child socket tcp: fix rejected syncookies due to stale timestamps lpc_eth: kernel BUG on remove tcp: md5: fix potential overestimation of TCP option space net: sched: allow indirect blocks to bind to clsact in TC net: core: rename indirect block ingress cb function net-sysfs: Call dev_hold always in netdev_queue_add_kobject net: dsa: fix flow dissection on Tx path net/tls: Fix return values to avoid ENOTSUPP net: avoid an indirect call in ____sys_recvmsg() ...
2019-12-07Merge tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd updates from Bruce Fields: "This is a relatively quiet cycle for nfsd, mainly various bugfixes. Possibly most interesting is Trond's fixes for some callback races that were due to my incomplete understanding of rpc client shutdown. Unfortunately at the last minute I've started noticing a new intermittent failure to send callbacks. As the logic seems basically correct, I'm leaving Trond's patches in for now, and hope to find a fix in the next week so I don't have to revert those patches" * tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linux: (24 commits) nfsd: depend on CRYPTO_MD5 for legacy client tracking NFSD fixing possible null pointer derefering in copy offload nfsd: check for EBUSY from vfs_rmdir/vfs_unink. nfsd: Ensure CLONE persists data and metadata changes to the target file SUNRPC: Fix backchannel latency metrics nfsd: restore NFSv3 ACL support nfsd: v4 support requires CRYPTO_SHA256 nfsd: Fix cld_net->cn_tfm initialization lockd: remove __KERNEL__ ifdefs sunrpc: remove __KERNEL__ ifdefs race in exportfs_decode_fh() nfsd: Drop LIST_HEAD where the variable it declares is never used. nfsd: document callback_wq serialization of callback code nfsd: mark cb path down on unknown errors nfsd: Fix races between nfsd4_cb_release() and nfsd4_shutdown_callback() nfsd: minor 4.1 callback cleanup SUNRPC: Fix svcauth_gss_proxy_init() SUNRPC: Trace gssproxy upcall results sunrpc: fix crash when cache_head become valid before update nfsd: remove private bin2hex implementation ...
2019-12-07Merge tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client updates from Trond Myklebust: "Highlights include: Features: - NFSv4.2 now supports cross device offloaded copy (i.e. offloaded copy of a file from one source server to a different target server). - New RDMA tracepoints for debugging congestion control and Local Invalidate WRs. Bugfixes and cleanups - Drop the NFSv4.1 session slot if nfs4_delegreturn_prepare waits for layoutreturn - Handle bad/dead sessions correctly in nfs41_sequence_process() - Various bugfixes to the delegation return operation. - Various bugfixes pertaining to delegations that have been revoked. - Cleanups to the NFS timespec code to avoid unnecessary conversions between timespec and timespec64. - Fix unstable RDMA connections after a reconnect - Close race between waking an RDMA sender and posting a receive - Wake pending RDMA tasks if connection fails - Fix MR list corruption, and clean up MR usage - Fix another RPCSEC_GSS issue with MIC buffer space" * tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits) SUNRPC: Capture completion of all RPC tasks SUNRPC: Fix another issue with MIC buffer space NFS4: Trace lock reclaims NFS4: Trace state recovery operation NFSv4.2 fix memory leak in nfs42_ssc_open NFSv4.2 fix kfree in __nfs42_copy_file_range NFS: remove duplicated include from nfs4file.c NFSv4: Make _nfs42_proc_copy_notify() static NFS: Fallocate should use the nfs4_fattr_bitmap NFS: Return -ETXTBSY when attempting to write to a swapfile fs: nfs: sysfs: Remove NULL check before kfree NFS: remove unneeded semicolon NFSv4: add declaration of current_stateid NFSv4.x: Drop the slot if nfs4_delegreturn_prepare waits for layoutreturn NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process() nfsv4: Move NFSPROC4_CLNT_COPY_NOTIFY to end of list SUNRPC: Avoid RPC delays when exiting suspend NFS: Add a tracepoint in nfs_fh_to_dentry() NFSv4: Don't retry the GETATTR on old stateid in nfs4_delegreturn_done() NFSv4: Handle NFS4ERR_OLD_STATEID in delegreturn ...
2019-12-07net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()Eric Dumazet
Use the new tcf_proto_check_kind() helper to make sure user provided value is well formed. BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:606 [inline] BUG: KMSAN: uninit-value in string+0x4be/0x600 lib/vsprintf.c:668 CPU: 0 PID: 12358 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108 __msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245 string_nocheck lib/vsprintf.c:606 [inline] string+0x4be/0x600 lib/vsprintf.c:668 vsnprintf+0x218f/0x3210 lib/vsprintf.c:2510 __request_module+0x2b1/0x11c0 kernel/kmod.c:143 tcf_proto_lookup_ops+0x171/0x700 net/sched/cls_api.c:139 tc_chain_tmplt_add net/sched/cls_api.c:2730 [inline] tc_ctl_chain+0x1904/0x38a0 net/sched/cls_api.c:2850 rtnetlink_rcv_msg+0x115a/0x1580 net/core/rtnetlink.c:5224 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5242 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x110f/0x1330 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg net/socket.c:657 [inline] ___sys_sendmsg+0x14ff/0x1590 net/socket.c:2311 __sys_sendmsg net/socket.c:2356 [inline] __do_sys_sendmsg net/socket.c:2365 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2363 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2363 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45a649 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f0790795c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000045a649 RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000006 RBP: 000000000075bfc8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f07907966d4 R13: 00000000004c8db5 R14: 00000000004df630 R15: 00000000ffffffff Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline] kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132 kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86 slab_alloc_node mm/slub.c:2773 [inline] __kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x306/0xa10 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline] netlink_sendmsg+0x783/0x1330 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg net/socket.c:657 [inline] ___sys_sendmsg+0x14ff/0x1590 net/socket.c:2311 __sys_sendmsg net/socket.c:2356 [inline] __do_sys_sendmsg net/socket.c:2365 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2363 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2363 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 6f96c3c6904c ("net_sched: fix backward compatibility for TCA_KIND") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07inet: protect against too small mtu values.Eric Dumazet
syzbot was once again able to crash a host by setting a very small mtu on loopback device. Let's make inetdev_valid_mtu() available in include/net/ip.h, and use it in ip_setup_cork(), so that we protect both ip_append_page() and __ip_append_data() Also add a READ_ONCE() when the device mtu is read. Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(), even if other code paths might write over this field. Add a big comment in include/linux/netdevice.h about dev->mtu needing READ_ONCE()/WRITE_ONCE() annotations. Hopefully we will add the missing ones in followup patches. [1] refcount_t: saturated; leaking memory. WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x3e kernel/panic.c:582 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89 RSP: 0018:ffff88809689f550 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1 R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001 R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40 refcount_add include/linux/refcount.h:193 [inline] skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999 sock_wmalloc+0xf1/0x120 net/core/sock.c:2096 ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383 udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276 inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821 kernel_sendpage+0x92/0xf0 net/socket.c:3794 sock_sendpage+0x8b/0xc0 net/socket.c:936 pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458 splice_from_pipe_feed fs/splice.c:512 [inline] __splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636 splice_from_pipe+0x108/0x170 fs/splice.c:671 generic_splice_sendpage+0x3c/0x50 fs/splice.c:842 do_splice_from fs/splice.c:861 [inline] direct_splice_actor+0x123/0x190 fs/splice.c:1035 splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990 do_splice_direct+0x1da/0x2a0 fs/splice.c:1078 do_sendfile+0x597/0xd00 fs/read_write.c:1464 __do_sys_sendfile64 fs/read_write.c:1525 [inline] __se_sys_sendfile64 fs/read_write.c:1511 [inline] __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441409 Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409 RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005 RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180 R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07gre: refetch erspan header from skb->data after pskb_may_pull()Cong Wang
After pskb_may_pull() we should always refetch the header pointers from the skb->data in case it got reallocated. In gre_parse_header(), the erspan header is still fetched from the 'options' pointer which is fetched before pskb_may_pull(). Found this during code review of a KMSAN bug report. Fixes: cb73ee40b1b3 ("net: ip_gre: use erspan key field for tunnel lookup") Cc: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: William Tu <u9012063@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06tcp: md5: fix potential overestimation of TCP option spaceEric Dumazet
Back in 2008, Adam Langley fixed the corner case of packets for flows having all of the following options : MD5 TS SACK Since MD5 needs 20 bytes, and TS needs 12 bytes, no sack block can be cooked from the remaining 8 bytes. tcp_established_options() correctly sets opts->num_sack_blocks to zero, but returns 36 instead of 32. This means TCP cooks packets with 4 extra bytes at the end of options, containing unitialized bytes. Fixes: 33ad798c924b ("tcp: options clean up") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net: sched: allow indirect blocks to bind to clsact in TCJohn Hurley
When a device is bound to a clsact qdisc, bind events are triggered to registered drivers for both ingress and egress. However, if a driver registers to such a device using the indirect block routines then it is assumed that it is only interested in ingress offload and so only replays ingress bind/unbind messages. The NFP driver supports the offload of some egress filters when registering to a block with qdisc of type clsact. However, on unregister, if the block is still active, it will not receive an unbind egress notification which can prevent proper cleanup of other registered callbacks. Modify the indirect block callback command in TC to send messages of ingress and/or egress bind depending on the qdisc in use. NFP currently supports egress offload for TC flower offload so the changes are only added to TC. Fixes: 4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports") Signed-off-by: John Hurley <john.hurley@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net: core: rename indirect block ingress cb functionJohn Hurley
With indirect blocks, a driver can register for callbacks from a device that is does not 'own', for example, a tunnel device. When registering to or unregistering from a new device, a callback is triggered to generate a bind/unbind event. This, in turn, allows the driver to receive any existing rules or to properly clean up installed rules. When first added, it was assumed that all indirect block registrations would be for ingress offloads. However, the NFP driver can, in some instances, support clsact qdisc binds for egress offload. Change the name of the indirect block callback command in flow_offload to remove the 'ingress' identifier from it. While this does not change functionality, a follow up patch will implement a more more generic callback than just those currently just supporting ingress offload. Fixes: 4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports") Signed-off-by: John Hurley <john.hurley@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net-sysfs: Call dev_hold always in netdev_queue_add_kobjectJouni Hogander
Dev_hold has to be called always in netdev_queue_add_kobject. Otherwise usage count drops below 0 in case of failure in kobject_init_and_add. Fixes: b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject") Reported-by: Hulk Robot <hulkci@huawei.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: David Miller <davem@davemloft.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net: dsa: fix flow dissection on Tx pathAlexander Lobakin
Commit 43e665287f93 ("net-next: dsa: fix flow dissection") added an ability to override protocol and network offset during flow dissection for DSA-enabled devices (i.e. controllers shipped as switch CPU ports) in order to fix skb hashing for RPS on Rx path. However, skb_hash() and added part of code can be invoked not only on Rx, but also on Tx path if we have a multi-queued device and: - kernel is running on UP system or - XPS is not configured. The call stack in this two cases will be like: dev_queue_xmit() -> __dev_queue_xmit() -> netdev_core_pick_tx() -> netdev_pick_tx() -> skb_tx_hash() -> skb_get_hash(). The problem is that skbs queued for Tx have both network offset and correct protocol already set up even after inserting a CPU tag by DSA tagger, so calling tag_ops->flow_dissect() on this path actually only breaks flow dissection and hashing. This can be observed by adding debug prints just before and right after tag_ops->flow_dissect() call to the related block of code: Before the patch: Rx path (RPS): [ 19.240001] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 19.244271] tag_ops->flow_dissect() [ 19.247811] Rx: proto: 0x0800, nhoff: 8 /* ETH_P_IP */ [ 19.215435] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 19.219746] tag_ops->flow_dissect() [ 19.223241] Rx: proto: 0x0806, nhoff: 8 /* ETH_P_ARP */ [ 18.654057] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 18.658332] tag_ops->flow_dissect() [ 18.661826] Rx: proto: 0x8100, nhoff: 8 /* ETH_P_8021Q */ Tx path (UP system): [ 18.759560] Tx: proto: 0x0800, nhoff: 26 /* ETH_P_IP */ [ 18.763933] tag_ops->flow_dissect() [ 18.767485] Tx: proto: 0x920b, nhoff: 34 /* junk */ [ 22.800020] Tx: proto: 0x0806, nhoff: 26 /* ETH_P_ARP */ [ 22.804392] tag_ops->flow_dissect() [ 22.807921] Tx: proto: 0x920b, nhoff: 34 /* junk */ [ 16.898342] Tx: proto: 0x86dd, nhoff: 26 /* ETH_P_IPV6 */ [ 16.902705] tag_ops->flow_dissect() [ 16.906227] Tx: proto: 0x920b, nhoff: 34 /* junk */ After: Rx path (RPS): [ 16.520993] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 16.525260] tag_ops->flow_dissect() [ 16.528808] Rx: proto: 0x0800, nhoff: 8 /* ETH_P_IP */ [ 15.484807] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 15.490417] tag_ops->flow_dissect() [ 15.495223] Rx: proto: 0x0806, nhoff: 8 /* ETH_P_ARP */ [ 17.134621] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 17.138895] tag_ops->flow_dissect() [ 17.142388] Rx: proto: 0x8100, nhoff: 8 /* ETH_P_8021Q */ Tx path (UP system): [ 15.499558] Tx: proto: 0x0800, nhoff: 26 /* ETH_P_IP */ [ 20.664689] Tx: proto: 0x0806, nhoff: 26 /* ETH_P_ARP */ [ 18.565782] Tx: proto: 0x86dd, nhoff: 26 /* ETH_P_IPV6 */ In order to fix that we can add the check 'proto == htons(ETH_P_XDSA)' to prevent code from calling tag_ops->flow_dissect() on Tx. I also decided to initialize 'offset' variable so tagger callbacks can now safely leave it untouched without provoking a chaos. Fixes: 43e665287f93 ("net-next: dsa: fix flow dissection") Signed-off-by: Alexander Lobakin <alobakin@dlink.ru> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net/tls: Fix return values to avoid ENOTSUPPValentin Vidic
ENOTSUPP is not available in userspace, for example: setsockopt failed, 524, Unknown error 524 Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net: avoid an indirect call in ____sys_recvmsg()Eric Dumazet
CONFIG_RETPOLINE=y made indirect calls expensive. gcc seems to add an indirect call in ____sys_recvmsg(). Rewriting the code slightly makes sure to avoid this indirection. Alternative would be to not call sock_recvmsg() and instead use security_socket_recvmsg() and sock_recvmsg_nosec(), but this is less readable IMO. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: David Laight <David.Laight@aculab.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06tipc: fix ordering of tipc module init and exit routineTaehee Yoo
In order to set/get/dump, the tipc uses the generic netlink infrastructure. So, when tipc module is inserted, init function calls genl_register_family(). After genl_register_family(), set/get/dump commands are immediately allowed and these callbacks internally use the net_generic. net_generic is allocated by register_pernet_device() but this is called after genl_register_family() in the __init function. So, these callbacks would use un-initialized net_generic. Test commands: #SHELL1 while : do modprobe tipc modprobe -rv tipc done #SHELL2 while : do tipc link list done Splat looks like: [ 59.616322][ T2788] kasan: CONFIG_KASAN_INLINE enabled [ 59.617234][ T2788] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 59.618398][ T2788] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 59.619389][ T2788] CPU: 3 PID: 2788 Comm: tipc Not tainted 5.4.0+ #194 [ 59.620231][ T2788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 59.621428][ T2788] RIP: 0010:tipc_bcast_get_broadcast_mode+0x131/0x310 [tipc] [ 59.622379][ T2788] Code: c7 c6 ef 8b 38 c0 65 ff 0d 84 83 c9 3f e8 d7 a5 f2 e3 48 8d bb 38 11 00 00 48 b8 00 00 00 00 [ 59.622550][ T2780] NET: Registered protocol family 30 [ 59.624627][ T2788] RSP: 0018:ffff88804b09f578 EFLAGS: 00010202 [ 59.624630][ T2788] RAX: dffffc0000000000 RBX: 0000000000000011 RCX: 000000008bc66907 [ 59.624631][ T2788] RDX: 0000000000000229 RSI: 000000004b3cf4cc RDI: 0000000000001149 [ 59.624633][ T2788] RBP: ffff88804b09f588 R08: 0000000000000003 R09: fffffbfff4fb3df1 [ 59.624635][ T2788] R10: fffffbfff50318f8 R11: ffff888066cadc18 R12: ffffffffa6cc2f40 [ 59.624637][ T2788] R13: 1ffff11009613eba R14: ffff8880662e9328 R15: ffff8880662e9328 [ 59.624639][ T2788] FS: 00007f57d8f7b740(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000 [ 59.624645][ T2788] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 59.625875][ T2780] tipc: Started in single node mode [ 59.626128][ T2788] CR2: 00007f57d887a8c0 CR3: 000000004b140002 CR4: 00000000000606e0 [ 59.633991][ T2788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 59.635195][ T2788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 59.636478][ T2788] Call Trace: [ 59.637025][ T2788] tipc_nl_add_bc_link+0x179/0x1470 [tipc] [ 59.638219][ T2788] ? lock_downgrade+0x6e0/0x6e0 [ 59.638923][ T2788] ? __tipc_nl_add_link+0xf90/0xf90 [tipc] [ 59.639533][ T2788] ? tipc_nl_node_dump_link+0x318/0xa50 [tipc] [ 59.640160][ T2788] ? mutex_lock_io_nested+0x1380/0x1380 [ 59.640746][ T2788] tipc_nl_node_dump_link+0x4fd/0xa50 [tipc] [ 59.641356][ T2788] ? tipc_nl_node_reset_link_stats+0x340/0x340 [tipc] [ 59.642088][ T2788] ? __skb_ext_del+0x270/0x270 [ 59.642594][ T2788] genl_lock_dumpit+0x85/0xb0 [ 59.643050][ T2788] netlink_dump+0x49c/0xed0 [ 59.643529][ T2788] ? __netlink_sendskb+0xc0/0xc0 [ 59.644044][ T2788] ? __netlink_dump_start+0x190/0x800 [ 59.644617][ T2788] ? __mutex_unlock_slowpath+0xd0/0x670 [ 59.645177][ T2788] __netlink_dump_start+0x5a0/0x800 [ 59.645692][ T2788] genl_rcv_msg+0xa75/0xe90 [ 59.646144][ T2788] ? __lock_acquire+0xdfe/0x3de0 [ 59.646692][ T2788] ? genl_family_rcv_msg_attrs_parse+0x320/0x320 [ 59.647340][ T2788] ? genl_lock_dumpit+0xb0/0xb0 [ 59.647821][ T2788] ? genl_unlock+0x20/0x20 [ 59.648290][ T2788] ? genl_parallel_done+0xe0/0xe0 [ 59.648787][ T2788] ? find_held_lock+0x39/0x1d0 [ 59.649276][ T2788] ? genl_rcv+0x15/0x40 [ 59.649722][ T2788] ? lock_contended+0xcd0/0xcd0 [ 59.650296][ T2788] netlink_rcv_skb+0x121/0x350 [ 59.650828][ T2788] ? genl_family_rcv_msg_attrs_parse+0x320/0x320 [ 59.651491][ T2788] ? netlink_ack+0x940/0x940 [ 59.651953][ T2788] ? lock_acquire+0x164/0x3b0 [ 59.652449][ T2788] genl_rcv+0x24/0x40 [ 59.652841][ T2788] netlink_unicast+0x421/0x600 [ ... ] Fixes: 7e4369057806 ("tipc: fix a slab object leak") Fixes: a62fbccecd62 ("tipc: make subscriber server support net namespace") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06mqprio: Fix out-of-bounds access in mqprio_dumpVladyslav Tarasiuk
When user runs a command like tc qdisc add dev eth1 root mqprio KASAN stack-out-of-bounds warning is emitted. Currently, NLA_ALIGN macro used in mqprio_dump provides too large buffer size as argument for nla_put and memcpy down the call stack. The flow looks like this: 1. nla_put expects exact object size as an argument; 2. Later it provides this size to memcpy; 3. To calculate correct padding for SKB, nla_put applies NLA_ALIGN macro itself. Therefore, NLA_ALIGN should not be applied to the nla_put parameter. Otherwise it will lead to out-of-bounds memory access in memcpy. Fixes: 4e8b86c06269 ("mqprio: Introduce new hardware offload mode and shaper in mqprio") Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06Merge tag 'for-linus-20191205' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull more block and io_uring updates from Jens Axboe: "I wasn't expecting this to be so big, and if I was, I would have used separate branches for this. Going forward I'll be doing separate branches for the current tree, just like for the next kernel version tree. In any case, this contains: - Series from Christoph that fixes an inherent race condition with zoned devices and revalidation. - null_blk zone size fix (Damien) - Fix for a regression in this merge window that caused busy spins by sending empty disk uevents (Eric) - Fix for a regression in this merge window for bfq stats (Hou) - Fix for io_uring creds allocation failure handling (me) - io_uring -ERESTARTSYS send/recvmsg fix (me) - Series that fixes the need for applications to retain state across async request punts for io_uring. This one is a bit larger than I would have hoped, but I think it's important we get this fixed for 5.5. - connect(2) improvement for io_uring, handling EINPROGRESS instead of having applications needing to poll for it (me) - Have io_uring use a hash for poll requests instead of an rbtree. This turned out to work much better in practice, so I think we should make the switch now. For some workloads, even with a fair amount of cancellations, the insertion sort is just too expensive. (me) - Various little io_uring fixes (me, Jackie, Pavel, LimingWu) - Fix for brd unaligned IO, and a warning for the future (Ming) - Fix for a bio integrity data leak (Justin) - bvec_iter_advance() improvement (Pavel) - Xen blkback page unmap fix (SeongJae) The major items in here are all well tested, and on the liburing side we continue to add regression and feature test cases. We're up to 50 topic cases now, each with anywhere from 1 to more than 10 cases in each" * tag 'for-linus-20191205' of git://git.kernel.dk/linux-block: (33 commits) block: fix memleak of bio integrity data io_uring: fix a typo in a comment bfq-iosched: Ensure bio->bi_blkg is valid before using it io_uring: hook all linked requests via link_list io_uring: fix error handling in io_queue_link_head io_uring: use hash table for poll command lookups io-wq: clear node->next on list deletion io_uring: ensure deferred timeouts copy necessary data io_uring: allow IO_SQE_* flags on IORING_OP_TIMEOUT null_blk: remove unused variable warning on !CONFIG_BLK_DEV_ZONED brd: warn on un-aligned buffer brd: remove max_hw_sectors queue limit xen/blkback: Avoid unmapping unmapped grant pages io_uring: handle connect -EINPROGRESS like -EAGAIN block: set the zone size in blk_revalidate_disk_zones atomically block: don't handle bio based drivers in blk_revalidate_disk_zones block: allocate the zone bitmaps lazily block: replace seq_zones_bitmap with conv_zones_bitmap block: simplify blkdev_nr_zones block: remove the empty line at the end of blk-zoned.c ...
2019-12-05Merge tag 'ceph-for-5.5-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "The two highlights are a set of improvements to how rbd read-only mappings are handled and a conversion to the new mount API (slightly complicated by the fact that we had a common option parsing framework that called out into rbd and the filesystem instead of them calling into it). Also included a few scattered fixes and a MAINTAINERS update for rbd, adding Dongsheng as a reviewer" * tag 'ceph-for-5.5-rc1' of git://github.com/ceph/ceph-client: libceph, rbd, ceph: convert to use the new mount API rbd: ask for a weaker incompat mask for read-only mappings rbd: don't query snapshot features rbd: remove snapshot existence validation code rbd: don't establish watch for read-only mappings rbd: don't acquire exclusive lock for read-only mappings rbd: disallow read-write partitions on images mapped read-only rbd: treat images mapped read-only seriously rbd: introduce RBD_DEV_FLAG_READONLY rbd: introduce rbd_is_snap() ceph: don't leave ino field in ceph_mds_request_head uninitialized ceph: tone down loglevel on ceph_mdsc_build_path warning rbd: update MAINTAINERS info ceph: fix geting random mds from mdsmap rbd: fix spelling mistake "requeueing" -> "requeuing" ceph: make several helper accessors take const pointers libceph: drop unnecessary check from dispatch() in mon_client.c
2019-12-05hsr: fix a NULL pointer dereference in hsr_dev_xmit()Taehee Yoo
hsr_dev_xmit() calls hsr_port_get_hsr() to find master node and that would return NULL if master node is not existing in the list. But hsr_dev_xmit() doesn't check return pointer so a NULL dereference could occur. Test commands: ip netns add nst ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link set veth1 netns nst ip link set veth3 netns nst ip link set veth0 up ip link set veth2 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec nst ip link set veth1 up ip netns exec nst ip link set veth3 up ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3 ip netns exec nst ip a a 192.168.100.2/24 dev hsr1 ip netns exec nst ip link set hsr1 up hping3 192.168.100.2 -2 --flood & modprobe -rv hsr Splat looks like: [ 217.351122][ T1635] kasan: CONFIG_KASAN_INLINE enabled [ 217.352969][ T1635] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 217.354297][ T1635] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 217.355507][ T1635] CPU: 1 PID: 1635 Comm: hping3 Not tainted 5.4.0+ #192 [ 217.356472][ T1635] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 217.357804][ T1635] RIP: 0010:hsr_dev_xmit+0x34/0x90 [hsr] [ 217.373010][ T1635] Code: 48 8d be 00 0c 00 00 be 04 00 00 00 48 83 ec 08 e8 21 be ff ff 48 8d 78 10 48 ba 00 b [ 217.376919][ T1635] RSP: 0018:ffff8880cd8af058 EFLAGS: 00010202 [ 217.377571][ T1635] RAX: 0000000000000000 RBX: ffff8880acde6840 RCX: 0000000000000002 [ 217.379465][ T1635] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: 0000000000000010 [ 217.380274][ T1635] RBP: ffff8880acde6840 R08: ffffed101b440d5d R09: 0000000000000001 [ 217.381078][ T1635] R10: 0000000000000001 R11: ffffed101b440d5c R12: ffff8880bffcc000 [ 217.382023][ T1635] R13: ffff8880bffcc088 R14: 0000000000000000 R15: ffff8880ca675c00 [ 217.383094][ T1635] FS: 00007f060d9d1740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 217.384289][ T1635] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 217.385009][ T1635] CR2: 00007faf15381dd0 CR3: 00000000d523c001 CR4: 00000000000606e0 [ 217.385940][ T1635] Call Trace: [ 217.386544][ T1635] dev_hard_start_xmit+0x160/0x740 [ 217.387114][ T1635] __dev_queue_xmit+0x1961/0x2e10 [ 217.388118][ T1635] ? check_object+0xaf/0x260 [ 217.391466][ T1635] ? __alloc_skb+0xb9/0x500 [ 217.392017][ T1635] ? init_object+0x6b/0x80 [ 217.392629][ T1635] ? netdev_core_pick_tx+0x2e0/0x2e0 [ 217.393175][ T1635] ? __alloc_skb+0xb9/0x500 [ 217.393727][ T1635] ? rcu_read_lock_sched_held+0x90/0xc0 [ 217.394331][ T1635] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 217.395013][ T1635] ? kasan_unpoison_shadow+0x30/0x40 [ 217.395668][ T1635] ? __kasan_kmalloc.constprop.4+0xa0/0xd0 [ 217.396280][ T1635] ? __kmalloc_node_track_caller+0x3a8/0x3f0 [ 217.399007][ T1635] ? __kasan_kmalloc.constprop.4+0xa0/0xd0 [ 217.400093][ T1635] ? __kmalloc_reserve.isra.46+0x2e/0xb0 [ 217.401118][ T1635] ? memset+0x1f/0x40 [ 217.402529][ T1635] ? __alloc_skb+0x317/0x500 [ 217.404915][ T1635] ? arp_xmit+0xca/0x2c0 [ ... ] Fixes: 311633b60406 ("hsr: switch ->dellink() to ->ndo_uninit()") Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04kernel/notifier.c: remove blocking_notifier_chain_cond_register()Xiaoming Ni
blocking_notifier_chain_cond_register() does not consider system_booting state, which is the only difference between this function and blocking_notifier_cain_register(). This can be a bug and is a piece of duplicate code. Delete blocking_notifier_chain_cond_register() Link: http://lkml.kernel.org/r/1568861888-34045-4-git-send-email-nixiaoming@huawei.com Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anna Schumaker <anna.schumaker@netapp.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Nadia Derbey <Nadia.Derbey@bull.net> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Vasily Averin <vvs@virtuozzo.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04net: Fixed updating of ethertype in skb_mpls_push()Martin Varghese
The skb_mpls_push was not updating ethertype of an ethernet packet if the packet was originally received from a non ARPHRD_ETHER device. In the below OVS data path flow, since the device corresponding to port 7 is an l3 device (ARPHRD_NONE) the skb_mpls_push function does not update the ethertype of the packet even though the previous push_eth action had added an ethernet header to the packet. recirc_id(0),in_port(7),eth_type(0x0800),ipv4(tos=0/0xfc,ttl=64,frag=no), actions:push_eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00), push_mpls(label=13,tc=0,ttl=64,bos=1,eth_type=0x8847),4 Fixes: 8822e270d697 ("net: core: move push MPLS functionality from OvS to core helper") Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04NFC: NCI: use new `delay` structure for SPI transfer delaysAlexandru Ardelean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_secs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6485 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04xdp: obtain the mem_id mutex before trying to remove an entry.Jonathan Lemon
A lockdep splat was observed when trying to remove an xdp memory model from the table since the mutex was obtained when trying to remove the entry, but not before the table walk started: Fix the splat by obtaining the lock before starting the table walk. Fixes: c3f812cea0d7 ("page_pool: do not release pool until inflight == 0.") Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04act_ct: support asymmetric conntrackAaron Conole
The act_ct TC module shares a common conntrack and NAT infrastructure exposed via netfilter. It's possible that a packet needs both SNAT and DNAT manipulation, due to e.g. tuple collision. Netfilter can support this because it runs through the NAT table twice - once on ingress and again after egress. The act_ct action doesn't have such capability. Like netfilter hook infrastructure, we should run through NAT twice to keep the symmetry. Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: Aaron Conole <aconole@redhat.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04openvswitch: support asymmetric conntrackAaron Conole
The openvswitch module shares a common conntrack and NAT infrastructure exposed via netfilter. It's possible that a packet needs both SNAT and DNAT manipulation, due to e.g. tuple collision. Netfilter can support this because it runs through the NAT table twice - once on ingress and again after egress. The openvswitch module doesn't have such capability. Like netfilter hook infrastructure, we should run through NAT twice to keep the symmetry. Fixes: 05752523e565 ("openvswitch: Interface with NAT.") Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04net: ipv6_stub: use ip6_dst_lookup_flow instead of ip6_dst_lookupSabrina Dubroca
ipv6_stub uses the ip6_dst_lookup function to allow other modules to perform IPv6 lookups. However, this function skips the XFRM layer entirely. All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the ip_route_output_key and ip_route_output helpers) for their IPv4 lookups, which calls xfrm_lookup_route(). This patch fixes this inconsistent behavior by switching the stub to ip6_dst_lookup_flow, which also calls xfrm_lookup_route(). This requires some changes in all the callers, as these two functions take different arguments and have different return types. Fixes: 5f81bd2e5d80 ("ipv6: export a stub for IPv6 symbols used by vxlan") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04net: ipv6: add net argument to ip6_dst_lookup_flowSabrina Dubroca
This will be used in the conversion of ipv6_stub to ip6_dst_lookup_flow, as some modules currently pass a net argument without a socket to ip6_dst_lookup. This is equivalent to commit 343d60aada5a ("ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument"). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03cls_flower: Fix the behavior using port ranges with hw-offloadYoshiki Komachi
The recent commit 5c72299fba9d ("net: sched: cls_flower: Classify packets using port ranges") had added filtering based on port ranges to tc flower. However the commit missed necessary changes in hw-offload code, so the feature gave rise to generating incorrect offloaded flow keys in NIC. One more detailed example is below: $ tc qdisc add dev eth0 ingress $ tc filter add dev eth0 ingress protocol ip flower ip_proto tcp \ dst_port 100-200 action drop With the setup above, an exact match filter with dst_port == 0 will be installed in NIC by hw-offload. IOW, the NIC will have a rule which is equivalent to the following one. $ tc qdisc add dev eth0 ingress $ tc filter add dev eth0 ingress protocol ip flower ip_proto tcp \ dst_port 0 action drop The behavior was caused by the flow dissector which extracts packet data into the flow key in the tc flower. More specifically, regardless of exact match or specified port ranges, fl_init_dissector() set the FLOW_DISSECTOR_KEY_PORTS flag in struct flow_dissector to extract port numbers from skb in skb_flow_dissect() called by fl_classify(). Note that device drivers received the same struct flow_dissector object as used in skb_flow_dissect(). Thus, offloaded drivers could not identify which of these is used because the FLOW_DISSECTOR_KEY_PORTS flag was set to struct flow_dissector in either case. This patch adds the new FLOW_DISSECTOR_KEY_PORTS_RANGE flag and the new tp_range field in struct fl_flow_key to recognize which filters are applied to offloaded drivers. At this point, when filters based on port ranges passed to drivers, drivers return the EOPNOTSUPP error because they do not support the feature (the newly created FLOW_DISSECTOR_KEY_PORTS_RANGE flag). Fixes: 5c72299fba9d ("net: sched: cls_flower: Classify packets using port ranges") Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03net: sched: fix dump qlen for sch_mq/sch_mqprio with NOLOCK subqueuesDust Li
sch->q.len hasn't been set if the subqueue is a NOLOCK qdisc in mq_dump() and mqprio_dump(). Fixes: ce679e8df7ed ("net: sched: add support for TCQ_F_NOLOCK subqueues to sch_mqprio") Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03tcp: refactor tcp_retransmit_timer()Eric Dumazet
It appears linux-4.14 stable needs a backport of commit 88f8598d0a30 ("tcp: exit if nothing to retransmit on RTO timeout") Since tcp_rtx_queue_empty() is not in pre 4.15 kernels, let's refactor tcp_retransmit_timer() to only use tcp_rtx_queue_head() I will provide to stable teams the squashed patches. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03net/core: Populate VF index in struct ifla_vf_guidDanit Goldberg
In addition to filling the node_guid and port_guid attributes, there is a need to populate VF index too, otherwise users of netlink interface will see same VF index for all VFs. Fixes: 30aad41721e0 ("net/core: Add support for getting VF GUIDs") Signed-off-by: Danit Goldberg <danitg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03net: bridge: deny dev_set_mac_address() when unregisteringNikolay Aleksandrov
We have an interesting memory leak in the bridge when it is being unregistered and is a slave to a master device which would change the mac of its slaves on unregister (e.g. bond, team). This is a very unusual setup but we do end up leaking 1 fdb entry because dev_set_mac_address() would cause the bridge to insert the new mac address into its table after all fdbs are flushed, i.e. after dellink() on the bridge has finished and we call NETDEV_UNREGISTER the bond/team would release it and will call dev_set_mac_address() to restore its original address and that in turn will add an fdb in the bridge. One fix is to check for the bridge dev's reg_state in its ndo_set_mac_address callback and return an error if the bridge is not in NETREG_REGISTERED. Easy steps to reproduce: 1. add bond in mode != A/B 2. add any slave to the bond 3. add bridge dev as a slave to the bond 4. destroy the bridge device Trace: unreferenced object 0xffff888035c4d080 (size 128): comm "ip", pid 4068, jiffies 4296209429 (age 1413.753s) hex dump (first 32 bytes): 41 1d c9 36 80 88 ff ff 00 00 00 00 00 00 00 00 A..6............ d2 19 c9 5e 3f d7 00 00 00 00 00 00 00 00 00 00 ...^?........... backtrace: [<00000000ddb525dc>] kmem_cache_alloc+0x155/0x26f [<00000000633ff1e0>] fdb_create+0x21/0x486 [bridge] [<0000000092b17e9c>] fdb_insert+0x91/0xdc [bridge] [<00000000f2a0f0ff>] br_fdb_change_mac_address+0xb3/0x175 [bridge] [<000000001de02dbd>] br_stp_change_bridge_id+0xf/0xff [bridge] [<00000000ac0e32b1>] br_set_mac_address+0x76/0x99 [bridge] [<000000006846a77f>] dev_set_mac_address+0x63/0x9b [<00000000d30738fc>] __bond_release_one+0x3f6/0x455 [bonding] [<00000000fc7ec01d>] bond_netdev_event+0x2f2/0x400 [bonding] [<00000000305d7795>] notifier_call_chain+0x38/0x56 [<0000000028885d4a>] call_netdevice_notifiers+0x1e/0x23 [<000000008279477b>] rollback_registered_many+0x353/0x6a4 [<0000000018ef753a>] unregister_netdevice_many+0x17/0x6f [<00000000ba854b7a>] rtnl_delete_link+0x3c/0x43 [<00000000adf8618d>] rtnl_dellink+0x1dc/0x20a [<000000009b6395fd>] rtnetlink_rcv_msg+0x23d/0x268 Fixes: 43598813386f ("bridge: add local MAC address to forwarding table (v2)") Reported-by: syzbot+2add91c08eb181fea1bf@syzkaller.appspotmail.com Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03net: fix a leak in register_netdevice()Dan Carpenter
We have to free "dev->name_node" on this error path. Fixes: ff92741270bf ("net: introduce name_node struct to be used in hashlist") Reported-by: syzbot+6e13e65ffbaa33757bcb@syzkaller.appspotmail.com Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03io_uring: ensure async punted connect requests copy dataJens Axboe
Just like commit f67676d160c6 for read/write requests, this one ensures that the sockaddr data has been copied for IORING_OP_CONNECT if we need to punt the request to async context. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03io_uring: ensure async punted sendmsg/recvmsg requests copy dataJens Axboe
Just like commit f67676d160c6 for read/write requests, this one ensures that the msghdr data is fully copied if we need to punt a recvmsg or sendmsg system call to async context. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-02Fixed updating of ethertype in function skb_mpls_popMartin Varghese
The skb_mpls_pop was not updating ethertype of an ethernet packet if the packet was originally received from a non ARPHRD_ETHER device. In the below OVS data path flow, since the device corresponding to port 7 is an l3 device (ARPHRD_NONE) the skb_mpls_pop function does not update the ethertype of the packet even though the previous push_eth action had added an ethernet header to the packet. recirc_id(0),in_port(7),eth_type(0x8847), mpls(label=12/0xfffff,tc=0/0,ttl=0/0x0,bos=1/1), actions:push_eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00), pop_mpls(eth_type=0x800),4 Fixes: ed246cee09b9 ("net: core: move pop MPLS functionality from OvS to core helper") Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-02sch_cake: Add missing NLA policy entry TCA_CAKE_SPLIT_GSOVictorien Molle
This field has never been checked since introduction in mainline kernel Signed-off-by: Victorien Molle <victorien.molle@wifirst.fr> Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Fixes: 2db6dc2662ba "sch_cake: Make gso-splitting configurable from userspace" Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix several scatter gather list issues in kTLS code, from Jakub Kicinski. 2) macb driver device remove has to kill the hresp_err_tasklet. From Chuhong Yuan. 3) Several memory leak and reference count bug fixes in tipc, from Tung Nguyen. 4) Fix mlx5 build error w/o ipv6, from Yue Haibing. 5) Fix jumbo frame and other regressions in r8169, from Heiner Kallweit. 6) Undo some BUG_ON()'s and replace them with WARN_ON_ONCE and proper error propagation/handling. From Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (24 commits) openvswitch: remove another BUG_ON() openvswitch: drop unneeded BUG_ON() in ovs_flow_cmd_build_info() net: phy: realtek: fix using paged operations with RTL8105e / RTL8208 r8169: fix resume on cable plug-in r8169: fix jumbo configuration for RTL8168evl net: emulex: benet: indent a Kconfig depends continuation line selftests: forwarding: fix race between packet receive and tc check net: sched: fix `tc -s class show` no bstats on class with nolock subqueues net: ethernet: ti: ale: ensure vlan/mdb deleted when no members net/mlx5e: Fix build error without IPV6 selftests: pmtu: use -oneline for ip route list cache tipc: fix duplicate SYN messages under link congestion tipc: fix wrong timeout input for tipc_wait_for_cond() tipc: fix wrong socket reference counter after tipc_sk_timeout() returns tipc: fix potential memory leak in __tipc_sendmsg() net: macb: add missed tasklet_kill selftests: bpf: correct perror strings selftests: bpf: test_sockmap: handle file creation failures gracefully net/tls: use sg_next() to walk sg entries net/tls: remove the dead inplace_crypto code ...
2019-12-01Merge tag 'y2038-cleanups-5.5' of ↵Linus Torvalds
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull y2038 cleanups from Arnd Bergmann: "y2038 syscall implementation cleanups This is a series of cleanups for the y2038 work, mostly intended for namespace cleaning: the kernel defines the traditional time_t, timeval and timespec types that often lead to y2038-unsafe code. Even though the unsafe usage is mostly gone from the kernel, having the types and associated functions around means that we can still grow new users, and that we may be missing conversions to safe types that actually matter. There are still a number of driver specific patches needed to get the last users of these types removed, those have been submitted to the respective maintainers" Link: https://lore.kernel.org/lkml/20191108210236.1296047-1-arnd@arndb.de/ * tag 'y2038-cleanups-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (26 commits) y2038: alarm: fix half-second cut-off y2038: ipc: fix x32 ABI breakage y2038: fix typo in powerpc vdso "LOPART" y2038: allow disabling time32 system calls y2038: itimer: change implementation to timespec64 y2038: move itimer reset into itimer.c y2038: use compat_{get,set}_itimer on alpha y2038: itimer: compat handling to itimer.c y2038: time: avoid timespec usage in settimeofday() y2038: timerfd: Use timespec64 internally y2038: elfcore: Use __kernel_old_timeval for process times y2038: make ns_to_compat_timeval use __kernel_old_timeval y2038: socket: use __kernel_old_timespec instead of timespec y2038: socket: remove timespec reference in timestamping y2038: syscalls: change remaining timeval to __kernel_old_timeval y2038: rusage: use __kernel_old_timeval y2038: uapi: change __kernel_time_t to __kernel_old_time_t y2038: stat: avoid 'time_t' in 'struct stat' y2038: ipc: remove __kernel_time_t reference from headers y2038: vdso: powerpc: avoid timespec references ...
2019-12-01Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-12-01openvswitch: remove another BUG_ON()Paolo Abeni
If we can't build the flow del notification, we can simply delete the flow, no need to crash the kernel. Still keep a WARN_ON to preserve debuggability. Note: the BUG_ON() predates the Fixes tag, but this change can be applied only after the mentioned commit. v1 -> v2: - do not leak an skb on error Fixes: aed067783e50 ("openvswitch: Minimize ovs_flow_cmd_del critical section.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-01openvswitch: drop unneeded BUG_ON() in ovs_flow_cmd_build_info()Paolo Abeni
All the callers of ovs_flow_cmd_build_info() already deal with error return code correctly, so we can handle the error condition in a more gracefull way. Still dump a warning to preserve debuggability. v1 -> v2: - clarify the commit message - clean the skb and report the error (DaveM) Fixes: ccb1352e76cf ("net: Add Open vSwitch kernel components.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-30Merge tag 'hyperv-next-signed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Sasha Levin: - support for new VMBus protocols (Andrea Parri) - hibernation support (Dexuan Cui) - latency testing framework (Branden Bonaby) - decoupling Hyper-V page size from guest page size (Himadri Pandya) * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits) Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic drivers/hv: Replace binary semaphore with mutex drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86 HID: hyperv: Add the support of hibernation hv_balloon: Add the support of hibernation x86/hyperv: Implement hv_is_hibernation_supported() Drivers: hv: balloon: Remove dependencies on guest page size Drivers: hv: vmbus: Remove dependencies on guest page size x86: hv: Add function to allocate zeroed page for Hyper-V Drivers: hv: util: Specify ring buffer size using Hyper-V page size Drivers: hv: Specify receive buffer size using Hyper-V page size tools: hv: add vmbus testing tool drivers: hv: vmbus: Introduce latency testing video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host hv_netvsc: Add the support of hibernation hv_sock: Add the support of hibernation video: hyperv_fb: Add the support of hibernation scsi: storvsc: Add the support of hibernation Drivers: hv: vmbus: Add module parameter to cap the VMBus version ...
2019-11-30net: sched: fix `tc -s class show` no bstats on class with nolock subqueuesDust Li
When a classful qdisc's child qdisc has set the flag TCQ_F_CPUSTATS (pfifo_fast for example), the child qdisc's cpu_bstats should be passed to gnet_stats_copy_basic(), but many classful qdisc didn't do that. As a result, `tc -s class show dev DEV` always return 0 for bytes and packets in this case. Pass the child qdisc's cpu_bstats to gnet_stats_copy_basic() to fix this issue. The qstats also has this problem, but it has been fixed in 5dd431b6b9 ("net: sched: introduce and use qstats read...") and bstats still remains buggy. Fixes: 22e0f8b9322c ("net: sched: make bstats per cpu and estimator RCU safe") Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28tipc: fix duplicate SYN messages under link congestionTung Nguyen
Scenario: 1. A client socket initiates a SYN message to a listening socket. 2. The send link is congested, the SYN message is put in the send link and a wakeup message is put in wakeup queue. 3. The congestion situation is abated, the wakeup message is pulled out of the wakeup queue. Function tipc_sk_push_backlog() is called to send out delayed messages by Nagle. However, the client socket is still in CONNECTING state. So, it sends the SYN message in the socket write queue to the listening socket again. 4. The listening socket receives the first SYN message and creates first server socket. The client socket receives ACK- and establishes a connection to the first server socket. The client socket closes its connection with the first server socket. 5. The listening socket receives the second SYN message and creates second server socket. The second server socket sends ACK- to the client socket, but it has been closed. It results in connection reset error when reading from the server socket in user space. Solution: return from function tipc_sk_push_backlog() immediately if there is pending SYN message in the socket write queue. Fixes: c0bceb97db9e ("tipc: add smart nagle feature") Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28tipc: fix wrong timeout input for tipc_wait_for_cond()Tung Nguyen
In function __tipc_shutdown(), the timeout value passed to tipc_wait_for_cond() is not jiffies. This commit fixes it by converting that value from milliseconds to jiffies. Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion") Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28tipc: fix wrong socket reference counter after tipc_sk_timeout() returnsTung Nguyen
When tipc_sk_timeout() is executed but user space is grabbing ownership, this function rearms itself and returns. However, the socket reference counter is not reduced. This causes potential unexpected behavior. This commit fixes it by calling sock_put() before tipc_sk_timeout() returns in the above-mentioned case. Fixes: afe8792fec69 ("tipc: refactor function tipc_sk_timeout()") Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28tipc: fix potential memory leak in __tipc_sendmsg()Tung Nguyen
When initiating a connection message to a server side, the connection message is cloned and added to the socket write queue. However, if the cloning is failed, only the socket write queue is purged. It causes memory leak because the original connection message is not freed. This commit fixes it by purging the list of connection message when it cannot be cloned. Fixes: 6787927475e5 ("tipc: buffer overflow handling in listener socket") Reported-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28net/tls: use sg_next() to walk sg entriesJakub Kicinski
Partially sent record cleanup path increments an SG entry directly instead of using sg_next(). This should not be a problem today, as encrypted messages should be always allocated as arrays. But given this is a cleanup path it's easy to miss was this ever to change. Use sg_next(), and simplify the code. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28net/tls: remove the dead inplace_crypto codeJakub Kicinski
Looks like when BPF support was added by commit d3b18ad31f93 ("tls: add bpf support to sk_msg handling") and commit d829e9c4112b ("tls: convert to generic sk_msg interface") it broke/removed the support for in-place crypto as added by commit 4e6d47206c32 ("tls: Add support for inplace records encryption"). The inplace_crypto member of struct tls_rec is dead, inited to zero, and sometimes set to zero again. It used to be set to 1 when record was allocated, but the skmsg code doesn't seem to have been written with the idea of in-place crypto in mind. Since non trivial effort is required to bring the feature back and we don't really have the HW to measure the benefit just remove the left over support for now to avoid confusing readers. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28net: skmsg: fix TLS 1.3 crash with full sk_msgJakub Kicinski
TLS 1.3 started using the entry at the end of the SG array for chaining-in the single byte content type entry. This mostly works: [ E E E E E E . . ] ^ ^ start end E < content type / [ E E E E E E C . ] ^ ^ start end (Where E denotes a populated SG entry; C denotes a chaining entry.) If the array is full, however, the end will point to the start: [ E E E E E E E E ] ^ start end And we end up overwriting the start: E < content type / [ C E E E E E E E ] ^ start end The sg array is supposed to be a circular buffer with start and end markers pointing anywhere. In case where start > end (i.e. the circular buffer has "wrapped") there is an extra entry reserved at the end to chain the two halves together. [ E E E E E E . . l ] (Where l is the reserved entry for "looping" back to front. As suggested by John, let's reserve another entry for chaining SG entries after the main circular buffer. Note that this entry has to be pointed to by the end entry so its position is not fixed. Examples of full messages: [ E E E E E E E E . l ] ^ ^ start end <---------------. [ E E . E E E E E E l ] ^ ^ end start Now the end will always point to an unused entry, so TLS 1.3 can always use it. Fixes: 130b392c6cd6 ("net: tls: Add tls 1.3 support") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>