From ecefae6db042283bf88ef3777f2381b18df8ed46 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 18 Jun 2019 18:05:38 -0300 Subject: docs: usb: rename files to .rst and add them to drivers-api While there are a mix of things here, most of the stuff were written from Kernel developer's PoV. So, add them to the driver-api book. A follow up for this patch would be to move documents from there that are specific to sysadmins, adding them to the admin-guide. Signed-off-by: Mauro Carvalho Chehab Acked-by: Johan Hovold Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/WUSB-Design-overview.txt | 457 -------------- Documentation/usb/acm.rst | 132 ++++ Documentation/usb/acm.txt | 132 ---- Documentation/usb/authorization.rst | 132 ++++ Documentation/usb/authorization.txt | 132 ---- Documentation/usb/chipidea.rst | 133 ++++ Documentation/usb/chipidea.txt | 133 ---- Documentation/usb/dwc3.rst | 53 ++ Documentation/usb/dwc3.txt | 53 -- Documentation/usb/ehci.rst | 230 +++++++ Documentation/usb/ehci.txt | 230 ------- Documentation/usb/functionfs.rst | 68 +++ Documentation/usb/functionfs.txt | 68 --- Documentation/usb/gadget-testing.rst | 934 +++++++++++++++++++++++++++++ Documentation/usb/gadget-testing.txt | 934 ----------------------------- Documentation/usb/gadget_configfs.rst | 390 ++++++++++++ Documentation/usb/gadget_configfs.txt | 390 ------------ Documentation/usb/gadget_hid.rst | 457 ++++++++++++++ Documentation/usb/gadget_hid.txt | 457 -------------- Documentation/usb/gadget_multi.rst | 165 +++++ Documentation/usb/gadget_multi.txt | 165 ----- Documentation/usb/gadget_printer.rst | 523 ++++++++++++++++ Documentation/usb/gadget_printer.txt | 523 ---------------- Documentation/usb/gadget_serial.rst | 289 +++++++++ Documentation/usb/gadget_serial.txt | 289 --------- Documentation/usb/index.rst | 39 ++ Documentation/usb/iuu_phoenix.rst | 94 +++ Documentation/usb/iuu_phoenix.txt | 94 --- Documentation/usb/mass-storage.rst | 234 ++++++++ Documentation/usb/mass-storage.txt | 234 -------- Documentation/usb/misc_usbsevseg.rst | 51 ++ Documentation/usb/misc_usbsevseg.txt | 51 -- Documentation/usb/mtouchusb.rst | 84 +++ Documentation/usb/mtouchusb.txt | 84 --- Documentation/usb/ohci.rst | 35 ++ Documentation/usb/ohci.txt | 35 -- Documentation/usb/rio.rst | 109 ++++ Documentation/usb/rio.txt | 109 ---- Documentation/usb/text_files.rst | 29 + Documentation/usb/usb-help.rst | 17 + Documentation/usb/usb-help.txt | 17 - Documentation/usb/usb-serial.rst | 537 +++++++++++++++++ Documentation/usb/usb-serial.txt | 537 ----------------- Documentation/usb/usbip_protocol.rst | 411 +++++++++++++ Documentation/usb/usbip_protocol.txt | 411 ------------- Documentation/usb/usbmon.rst | 375 ++++++++++++ Documentation/usb/usbmon.txt | 375 ------------ Documentation/usb/wusb-design-overview.rst | 457 ++++++++++++++ 48 files changed, 5978 insertions(+), 5910 deletions(-) delete mode 100644 Documentation/usb/WUSB-Design-overview.txt create mode 100644 Documentation/usb/acm.rst delete mode 100644 Documentation/usb/acm.txt create mode 100644 Documentation/usb/authorization.rst delete mode 100644 Documentation/usb/authorization.txt create mode 100644 Documentation/usb/chipidea.rst delete mode 100644 Documentation/usb/chipidea.txt create mode 100644 Documentation/usb/dwc3.rst delete mode 100644 Documentation/usb/dwc3.txt create mode 100644 Documentation/usb/ehci.rst delete mode 100644 Documentation/usb/ehci.txt create mode 100644 Documentation/usb/functionfs.rst delete mode 100644 Documentation/usb/functionfs.txt create mode 100644 Documentation/usb/gadget-testing.rst delete mode 100644 Documentation/usb/gadget-testing.txt create mode 100644 Documentation/usb/gadget_configfs.rst delete mode 100644 Documentation/usb/gadget_configfs.txt create mode 100644 Documentation/usb/gadget_hid.rst delete mode 100644 Documentation/usb/gadget_hid.txt create mode 100644 Documentation/usb/gadget_multi.rst delete mode 100644 Documentation/usb/gadget_multi.txt create mode 100644 Documentation/usb/gadget_printer.rst delete mode 100644 Documentation/usb/gadget_printer.txt create mode 100644 Documentation/usb/gadget_serial.rst delete mode 100644 Documentation/usb/gadget_serial.txt create mode 100644 Documentation/usb/index.rst create mode 100644 Documentation/usb/iuu_phoenix.rst delete mode 100644 Documentation/usb/iuu_phoenix.txt create mode 100644 Documentation/usb/mass-storage.rst delete mode 100644 Documentation/usb/mass-storage.txt create mode 100644 Documentation/usb/misc_usbsevseg.rst delete mode 100644 Documentation/usb/misc_usbsevseg.txt create mode 100644 Documentation/usb/mtouchusb.rst delete mode 100644 Documentation/usb/mtouchusb.txt create mode 100644 Documentation/usb/ohci.rst delete mode 100644 Documentation/usb/ohci.txt create mode 100644 Documentation/usb/rio.rst delete mode 100644 Documentation/usb/rio.txt create mode 100644 Documentation/usb/text_files.rst create mode 100644 Documentation/usb/usb-help.rst delete mode 100644 Documentation/usb/usb-help.txt create mode 100644 Documentation/usb/usb-serial.rst delete mode 100644 Documentation/usb/usb-serial.txt create mode 100644 Documentation/usb/usbip_protocol.rst delete mode 100644 Documentation/usb/usbip_protocol.txt create mode 100644 Documentation/usb/usbmon.rst delete mode 100644 Documentation/usb/usbmon.txt create mode 100644 Documentation/usb/wusb-design-overview.rst (limited to 'Documentation/usb') diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt deleted file mode 100644 index dc5e21609bb5..000000000000 --- a/Documentation/usb/WUSB-Design-overview.txt +++ /dev/null @@ -1,457 +0,0 @@ -================================ -Linux UWB + Wireless USB + WiNET -================================ - - Copyright (C) 2005-2006 Intel Corporation - - Inaky Perez-Gonzalez - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License version - 2 as published by the Free Software Foundation. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - 02110-1301, USA. - - -Please visit http://bughost.org/thewiki/Design-overview.txt-1.8 for -updated content. - - * Design-overview.txt-1.8 - -This code implements a Ultra Wide Band stack for Linux, as well as -drivers for the USB based UWB radio controllers defined in the -Wireless USB 1.0 specification (including Wireless USB host controller -and an Intel WiNET controller). - -.. Contents - 1. Introduction - 1. HWA: Host Wire adapters, your Wireless USB dongle - - 2. DWA: Device Wired Adaptor, a Wireless USB hub for wired - devices - 3. WHCI: Wireless Host Controller Interface, the PCI WUSB host - adapter - 2. The UWB stack - 1. Devices and hosts: the basic structure - - 2. Host Controller life cycle - - 3. On the air: beacons and enumerating the radio neighborhood - - 4. Device lists - 5. Bandwidth allocation - - 3. Wireless USB Host Controller drivers - - 4. Glossary - - -Introduction -============ - -UWB is a wide-band communication protocol that is to serve also as the -low-level protocol for others (much like TCP sits on IP). Currently -these others are Wireless USB and TCP/IP, but seems Bluetooth and -Firewire/1394 are coming along. - -UWB uses a band from roughly 3 to 10 GHz, transmitting at a max of -~-41dB (or 0.074 uW/MHz--geography specific data is still being -negotiated w/ regulators, so watch for changes). That band is divided in -a bunch of ~1.5 GHz wide channels (or band groups) composed of three -subbands/subchannels (528 MHz each). Each channel is independent of each -other, so you could consider them different "busses". Initially this -driver considers them all a single one. - -Radio time is divided in 65536 us long /superframes/, each one divided -in 256 256us long /MASs/ (Media Allocation Slots), which are the basic -time/media allocation units for transferring data. At the beginning of -each superframe there is a Beacon Period (BP), where every device -transmit its beacon on a single MAS. The length of the BP depends on how -many devices are present and the length of their beacons. - -Devices have a MAC (fixed, 48 bit address) and a device (changeable, 16 -bit address) and send periodic beacons to advertise themselves and pass -info on what they are and do. They advertise their capabilities and a -bunch of other stuff. - -The different logical parts of this driver are: - - * - - *UWB*: the Ultra-Wide-Band stack -- manages the radio and - associated spectrum to allow for devices sharing it. Allows to - control bandwidth assignment, beaconing, scanning, etc - - * - - *WUSB*: the layer that sits on top of UWB to provide Wireless USB. - The Wireless USB spec defines means to control a UWB radio and to - do the actual WUSB. - - -HWA: Host Wire adapters, your Wireless USB dongle -------------------------------------------------- - -WUSB also defines a device called a Host Wire Adaptor (HWA), which in -mere terms is a USB dongle that enables your PC to have UWB and Wireless -USB. The Wireless USB Host Controller in a HWA looks to the host like a -[Wireless] USB controller connected via USB (!) - -The HWA itself is broken in two or three main interfaces: - - * - - *RC*: Radio control -- this implements an interface to the - Ultra-Wide-Band radio controller. The driver for this implements a - USB-based UWB Radio Controller to the UWB stack. - - * - - *HC*: the wireless USB host controller. It looks like a USB host - whose root port is the radio and the WUSB devices connect to it. - To the system it looks like a separate USB host. The driver (will) - implement a USB host controller (similar to UHCI, OHCI or EHCI) - for which the root hub is the radio...To reiterate: it is a USB - controller that is connected via USB instead of PCI. - - * - - *WINET*: some HW provide a WiNET interface (IP over UWB). This - package provides a driver for it (it looks like a network - interface, winetX). The driver detects when there is a link up for - their type and kick into gear. - - -DWA: Device Wired Adaptor, a Wireless USB hub for wired devices ---------------------------------------------------------------- - -These are the complement to HWAs. They are a USB host for connecting -wired devices, but it is connected to your PC connected via Wireless -USB. To the system it looks like yet another USB host. To the untrained -eye, it looks like a hub that connects upstream wirelessly. - -We still offer no support for this; however, it should share a lot of -code with the HWA-RC driver; there is a bunch of factorization work that -has been done to support that in upcoming releases. - - -WHCI: Wireless Host Controller Interface, the PCI WUSB host adapter -------------------------------------------------------------------- - -This is your usual PCI device that implements WHCI. Similar in concept -to EHCI, it allows your wireless USB devices (including DWAs) to connect -to your host via a PCI interface. As in the case of the HWA, it has a -Radio Control interface and the WUSB Host Controller interface per se. - -There is still no driver support for this, but will be in upcoming -releases. - - -The UWB stack -============= - -The main mission of the UWB stack is to keep a tally of which devices -are in radio proximity to allow drivers to connect to them. As well, it -provides an API for controlling the local radio controllers (RCs from -now on), such as to start/stop beaconing, scan, allocate bandwidth, etc. - - -Devices and hosts: the basic structure --------------------------------------- - -The main building block here is the UWB device (struct uwb_dev). For -each device that pops up in radio presence (ie: the UWB host receives a -beacon from it) you get a struct uwb_dev that will show up in -/sys/bus/uwb/devices. - -For each RC that is detected, a new struct uwb_rc and struct uwb_dev are -created. An entry is also created in /sys/class/uwb_rc for each RC. - -Each RC driver is implemented by a separate driver that plugs into the -interface that the UWB stack provides through a struct uwb_rc_ops. The -spec creators have been nice enough to make the message format the same -for HWA and WHCI RCs, so the driver is really a very thin transport that -moves the requests from the UWB API to the device [/uwb_rc_ops->cmd()/] -and sends the replies and notifications back to the API -[/uwb_rc_neh_grok()/]. Notifications are handled to the UWB daemon, that -is chartered, among other things, to keep the tab of how the UWB radio -neighborhood looks, creating and destroying devices as they show up or -disappear. - -Command execution is very simple: a command block is sent and a event -block or reply is expected back. For sending/receiving command/events, a -handle called /neh/ (Notification/Event Handle) is opened with -/uwb_rc_neh_open()/. - -The HWA-RC (USB dongle) driver (drivers/uwb/hwa-rc.c) does this job for -the USB connected HWA. Eventually, drivers/whci-rc.c will do the same -for the PCI connected WHCI controller. - - -Host Controller life cycle --------------------------- - -So let's say we connect a dongle to the system: it is detected and -firmware uploaded if needed [for Intel's i1480 -/drivers/uwb/ptc/usb.c:ptc_usb_probe()/] and then it is reenumerated. -Now we have a real HWA device connected and -/drivers/uwb/hwa-rc.c:hwarc_probe()/ picks it up, that will set up the -Wire-Adaptor environment and then suck it into the UWB stack's vision of -the world [/drivers/uwb/lc-rc.c:uwb_rc_add()/]. - - * - - [*] The stack should put a new RC to scan for devices - [/uwb_rc_scan()/] so it finds what's available around and tries to - connect to them, but this is policy stuff and should be driven - from user space. As of now, the operator is expected to do it - manually; see the release notes for documentation on the procedure. - -When a dongle is disconnected, /drivers/uwb/hwa-rc.c:hwarc_disconnect()/ -takes time of tearing everything down safely (or not...). - - -On the air: beacons and enumerating the radio neighborhood ----------------------------------------------------------- - -So assuming we have devices and we have agreed for a channel to connect -on (let's say 9), we put the new RC to beacon: - - * - - $ echo 9 0 > /sys/class/uwb_rc/uwb0/beacon - -Now it is visible. If there were other devices in the same radio channel -and beacon group (that's what the zero is for), the dongle's radio -control interface will send beacon notifications on its -notification/event endpoint (NEEP). The beacon notifications are part of -the event stream that is funneled into the API with -/drivers/uwb/neh.c:uwb_rc_neh_grok()/ and delivered to the UWBD, the UWB -daemon through a notification list. - -UWBD wakes up and scans the event list; finds a beacon and adds it to -the BEACON CACHE (/uwb_beca/). If he receives a number of beacons from -the same device, he considers it to be 'onair' and creates a new device -[/drivers/uwb/lc-dev.c:uwbd_dev_onair()/]. Similarly, when no beacons -are received in some time, the device is considered gone and wiped out -[uwbd calls periodically /uwb/beacon.c:uwb_beca_purge()/ that will purge -the beacon cache of dead devices]. - - -Device lists ------------- - -All UWB devices are kept in the list of the struct bus_type uwb_bus_type. - - -Bandwidth allocation --------------------- - -The UWB stack maintains a local copy of DRP availability through -processing of incoming *DRP Availability Change* notifications. This -local copy is currently used to present the current bandwidth -availability to the user through the sysfs file -/sys/class/uwb_rc/uwbx/bw_avail. In the future the bandwidth -availability information will be used by the bandwidth reservation -routines. - -The bandwidth reservation routines are in progress and are thus not -present in the current release. When completed they will enable a user -to initiate DRP reservation requests through interaction with sysfs. DRP -reservation requests from remote UWB devices will also be handled. The -bandwidth management done by the UWB stack will include callbacks to the -higher layers will enable the higher layers to use the reservations upon -completion. [Note: The bandwidth reservation work is in progress and -subject to change.] - - -Wireless USB Host Controller drivers -==================================== - -*WARNING* This section needs a lot of work! - -As explained above, there are three different types of HCs in the WUSB -world: HWA-HC, DWA-HC and WHCI-HC. - -HWA-HC and DWA-HC share that they are Wire-Adapters (USB or WUSB -connected controllers), and their transfer management system is almost -identical. So is their notification delivery system. - -HWA-HC and WHCI-HC share that they are both WUSB host controllers, so -they have to deal with WUSB device life cycle and maintenance, wireless -root-hub - -HWA exposes a Host Controller interface (HWA-HC 0xe0/02/02). This has -three endpoints (Notifications, Data Transfer In and Data Transfer -Out--known as NEP, DTI and DTO in the code). - -We reserve UWB bandwidth for our Wireless USB Cluster, create a Cluster -ID and tell the HC to use all that. Then we start it. This means the HC -starts sending MMCs. - - * - - The MMCs are blocks of data defined somewhere in the WUSB1.0 spec - that define a stream in the UWB channel time allocated for sending - WUSB IEs (host to device commands/notifications) and Device - Notifications (device initiated to host). Each host defines a - unique Wireless USB cluster through MMCs. Devices can connect to a - single cluster at the time. The IEs are Information Elements, and - among them are the bandwidth allocations that tell each device - when can they transmit or receive. - -Now it all depends on external stimuli. - -New device connection ---------------------- - -A new device pops up, it scans the radio looking for MMCs that give out -the existence of Wireless USB channels. Once one (or more) are found, -selects which one to connect to. Sends a /DN_Connect/ (device -notification connect) during the DNTS (Device Notification Time -Slot--announced in the MMCs - -HC picks the /DN_Connect/ out (nep module sends to notif.c for delivery -into /devconnect/). This process starts the authentication process for -the device. First we allocate a /fake port/ and assign an -unauthenticated address (128 to 255--what we really do is -0x80 | fake_port_idx). We fiddle with the fake port status and /hub_wq/ -sees a new connection, so he moves on to enable the fake port with a reset. - -So now we are in the reset path -- we know we have a non-yet enumerated -device with an unauthorized address; we ask user space to authenticate -(FIXME: not yet done, similar to bluetooth pairing), then we do the key -exchange (FIXME: not yet done) and issue a /set address 0/ to bring the -device to the default state. Device is authenticated. - -From here, the USB stack takes control through the usb_hcd ops. hub_wq -has seen the port status changes, as we have been toggling them. It will -start enumerating and doing transfers through usb_hcd->urb_enqueue() to -read descriptors and move our data. - -Device life cycle and keep alives ---------------------------------- - -Every time there is a successful transfer to/from a device, we update a -per-device activity timestamp. If not, every now and then we check and -if the activity timestamp gets old, we ping the device by sending it a -Keep Alive IE; it responds with a /DN_Alive/ pong during the DNTS (this -arrives to us as a notification through -devconnect.c:wusb_handle_dn_alive(). If a device times out, we -disconnect it from the system (cleaning up internal information and -toggling the bits in the fake hub port, which kicks hub_wq into removing -the rest of the stuff). - -This is done through devconnect:__wusb_check_devs(), which will scan the -device list looking for whom needs refreshing. - -If the device wants to disconnect, it will either die (ugly) or send a -/DN_Disconnect/ that will prompt a disconnection from the system. - -Sending and receiving data --------------------------- - -Data is sent and received through /Remote Pipes/ (rpipes). An rpipe is -/aimed/ at an endpoint in a WUSB device. This is the same for HWAs and -DWAs. - -Each HC has a number of rpipes and buffers that can be assigned to them; -when doing a data transfer (xfer), first the rpipe has to be aimed and -prepared (buffers assigned), then we can start queueing requests for -data in or out. - -Data buffers have to be segmented out before sending--so we send first a -header (segment request) and then if there is any data, a data buffer -immediately after to the DTI interface (yep, even the request). If our -buffer is bigger than the max segment size, then we just do multiple -requests. - -[This sucks, because doing USB scatter gatter in Linux is resource -intensive, if any...not that the current approach is not. It just has to -be cleaned up a lot :)]. - -If reading, we don't send data buffers, just the segment headers saying -we want to read segments. - -When the xfer is executed, we receive a notification that says data is -ready in the DTI endpoint (handled through -xfer.c:wa_handle_notif_xfer()). In there we read from the DTI endpoint a -descriptor that gives us the status of the transfer, its identification -(given when we issued it) and the segment number. If it was a data read, -we issue another URB to read into the destination buffer the chunk of -data coming out of the remote endpoint. Done, wait for the next guy. The -callbacks for the URBs issued from here are the ones that will declare -the xfer complete at some point and call its callback. - -Seems simple, but the implementation is not trivial. - - * - - *WARNING* Old!! - -The main xfer descriptor, wa_xfer (equivalent to a URB) contains an -array of segments, tallys on segments and buffers and callback -information. Buried in there is a lot of URBs for executing the segments -and buffer transfers. - -For OUT xfers, there is an array of segments, one URB for each, another -one of buffer URB. When submitting, we submit URBs for segment request -1, buffer 1, segment 2, buffer 2...etc. Then we wait on the DTI for xfer -result data; when all the segments are complete, we call the callback to -finalize the transfer. - -For IN xfers, we only issue URBs for the segments we want to read and -then wait for the xfer result data. - -URB mapping into xfers -^^^^^^^^^^^^^^^^^^^^^^ - -This is done by hwahc_op_urb_[en|de]queue(). In enqueue() we aim an -rpipe to the endpoint where we have to transmit, create a transfer -context (wa_xfer) and submit it. When the xfer is done, our callback is -called and we assign the status bits and release the xfer resources. - -In dequeue() we are basically cancelling/aborting the transfer. We issue -a xfer abort request to the HC, cancel all the URBs we had submitted -and not yet done and when all that is done, the xfer callback will be -called--this will call the URB callback. - - -Glossary -======== - -*DWA* -- Device Wire Adapter - -USB host, wired for downstream devices, upstream connects wirelessly -with Wireless USB. - -*EVENT* -- Response to a command on the NEEP - -*HWA* -- Host Wire Adapter / USB dongle for UWB and Wireless USB - -*NEH* -- Notification/Event Handle - -Handle/file descriptor for receiving notifications or events. The WA -code requires you to get one of this to listen for notifications or -events on the NEEP. - -*NEEP* -- Notification/Event EndPoint - -Stuff related to the management of the first endpoint of a HWA USB -dongle that is used to deliver an stream of events and notifications to -the host. - -*NOTIFICATION* -- Message coming in the NEEP as response to something. - -*RC* -- Radio Control - -Design-overview.txt-1.8 (last edited 2006-11-04 12:22:24 by -InakyPerezGonzalez) diff --git a/Documentation/usb/acm.rst b/Documentation/usb/acm.rst new file mode 100644 index 000000000000..e8bda98e9b51 --- /dev/null +++ b/Documentation/usb/acm.rst @@ -0,0 +1,132 @@ +====================== +Linux ACM driver v0.16 +====================== + +Copyright (c) 1999 Vojtech Pavlik + +Sponsored by SuSE + +0. Disclaimer +~~~~~~~~~~~~~ +This program is free software; you can redistribute it and/or modify it +under the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2 of the License, or (at your option) +any later version. + +This program is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY +or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +more details. + +You should have received a copy of the GNU General Public License along +with this program; if not, write to the Free Software Foundation, Inc., 59 +Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Should you need to contact me, the author, you can do so either by e-mail - +mail your message to , or by paper mail: Vojtech Pavlik, +Ucitelska 1576, Prague 8, 182 00 Czech Republic + +For your convenience, the GNU General Public License version 2 is included +in the package: See the file COPYING. + +1. Usage +~~~~~~~~ +The drivers/usb/class/cdc-acm.c drivers works with USB modems and USB ISDN terminal +adapters that conform to the Universal Serial Bus Communication Device Class +Abstract Control Model (USB CDC ACM) specification. + +Many modems do, here is a list of those I know of: + + - 3Com OfficeConnect 56k + - 3Com Voice FaxModem Pro + - 3Com Sportster + - MultiTech MultiModem 56k + - Zoom 2986L FaxModem + - Compaq 56k FaxModem + - ELSA Microlink 56k + +I know of one ISDN TA that does work with the acm driver: + + - 3Com USR ISDN Pro TA + +Some cell phones also connect via USB. I know the following phones work: + + - SonyEricsson K800i + +Unfortunately many modems and most ISDN TAs use proprietary interfaces and +thus won't work with this drivers. Check for ACM compliance before buying. + +To use the modems you need these modules loaded:: + + usbcore.ko + uhci-hcd.ko ohci-hcd.ko or ehci-hcd.ko + cdc-acm.ko + +After that, the modem[s] should be accessible. You should be able to use +minicom, ppp and mgetty with them. + +2. Verifying that it works +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The first step would be to check /sys/kernel/debug/usb/devices, it should look +like this:: + + T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 + B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 + D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 + P: Vendor=0000 ProdID=0000 Rev= 0.00 + S: Product=USB UHCI Root Hub + S: SerialNumber=6800 + C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA + I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub + E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms + T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 + D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2 + P: Vendor=04c1 ProdID=008f Rev= 2.07 + S: Manufacturer=3Com Inc. + S: Product=3Com U.S. Robotics Pro ISDN TA + S: SerialNumber=UFT53A49BVT7 + C: #Ifs= 1 Cfg#= 1 Atr=60 MxPwr= 0mA + I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=acm + E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms + E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms + E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms + C:* #Ifs= 2 Cfg#= 2 Atr=60 MxPwr= 0mA + I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm + E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms + I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm + E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms + E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms + +The presence of these three lines (and the Cls= 'comm' and 'data' classes) +is important, it means it's an ACM device. The Driver=acm means the acm +driver is used for the device. If you see only Cls=ff(vend.) then you're out +of luck, you have a device with vendor specific-interface:: + + D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2 + I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm + I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm + +In the system log you should see:: + + usb.c: USB new device connect, assigned device number 2 + usb.c: kmalloc IF c7691fa0, numif 1 + usb.c: kmalloc IF c7b5f3e0, numif 2 + usb.c: skipped 4 class/vendor specific interface descriptors + usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3 + usb.c: USB device number 2 default language ID 0x409 + Manufacturer: 3Com Inc. + Product: 3Com U.S. Robotics Pro ISDN TA + SerialNumber: UFT53A49BVT7 + acm.c: probing config 1 + acm.c: probing config 2 + ttyACM0: USB ACM device + acm.c: acm_control_msg: rq: 0x22 val: 0x0 len: 0x0 result: 0 + acm.c: acm_control_msg: rq: 0x20 val: 0x0 len: 0x7 result: 7 + usb.c: acm driver claimed interface c7b5f3e0 + usb.c: acm driver claimed interface c7b5f3f8 + usb.c: acm driver claimed interface c7691fa0 + +If all this seems to be OK, fire up minicom and set it to talk to the ttyACM +device and try typing 'at'. If it responds with 'OK', then everything is +working. diff --git a/Documentation/usb/acm.txt b/Documentation/usb/acm.txt deleted file mode 100644 index e8bda98e9b51..000000000000 --- a/Documentation/usb/acm.txt +++ /dev/null @@ -1,132 +0,0 @@ -====================== -Linux ACM driver v0.16 -====================== - -Copyright (c) 1999 Vojtech Pavlik - -Sponsored by SuSE - -0. Disclaimer -~~~~~~~~~~~~~ -This program is free software; you can redistribute it and/or modify it -under the terms of the GNU General Public License as published by the Free -Software Foundation; either version 2 of the License, or (at your option) -any later version. - -This program is distributed in the hope that it will be useful, but -WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -more details. - -You should have received a copy of the GNU General Public License along -with this program; if not, write to the Free Software Foundation, Inc., 59 -Temple Place, Suite 330, Boston, MA 02111-1307 USA - -Should you need to contact me, the author, you can do so either by e-mail - -mail your message to , or by paper mail: Vojtech Pavlik, -Ucitelska 1576, Prague 8, 182 00 Czech Republic - -For your convenience, the GNU General Public License version 2 is included -in the package: See the file COPYING. - -1. Usage -~~~~~~~~ -The drivers/usb/class/cdc-acm.c drivers works with USB modems and USB ISDN terminal -adapters that conform to the Universal Serial Bus Communication Device Class -Abstract Control Model (USB CDC ACM) specification. - -Many modems do, here is a list of those I know of: - - - 3Com OfficeConnect 56k - - 3Com Voice FaxModem Pro - - 3Com Sportster - - MultiTech MultiModem 56k - - Zoom 2986L FaxModem - - Compaq 56k FaxModem - - ELSA Microlink 56k - -I know of one ISDN TA that does work with the acm driver: - - - 3Com USR ISDN Pro TA - -Some cell phones also connect via USB. I know the following phones work: - - - SonyEricsson K800i - -Unfortunately many modems and most ISDN TAs use proprietary interfaces and -thus won't work with this drivers. Check for ACM compliance before buying. - -To use the modems you need these modules loaded:: - - usbcore.ko - uhci-hcd.ko ohci-hcd.ko or ehci-hcd.ko - cdc-acm.ko - -After that, the modem[s] should be accessible. You should be able to use -minicom, ppp and mgetty with them. - -2. Verifying that it works -~~~~~~~~~~~~~~~~~~~~~~~~~~ - -The first step would be to check /sys/kernel/debug/usb/devices, it should look -like this:: - - T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 - B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 - D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 - P: Vendor=0000 ProdID=0000 Rev= 0.00 - S: Product=USB UHCI Root Hub - S: SerialNumber=6800 - C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA - I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub - E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms - T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 - D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2 - P: Vendor=04c1 ProdID=008f Rev= 2.07 - S: Manufacturer=3Com Inc. - S: Product=3Com U.S. Robotics Pro ISDN TA - S: SerialNumber=UFT53A49BVT7 - C: #Ifs= 1 Cfg#= 1 Atr=60 MxPwr= 0mA - I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=acm - E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms - E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms - E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms - C:* #Ifs= 2 Cfg#= 2 Atr=60 MxPwr= 0mA - I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm - E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms - I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm - E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms - E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms - -The presence of these three lines (and the Cls= 'comm' and 'data' classes) -is important, it means it's an ACM device. The Driver=acm means the acm -driver is used for the device. If you see only Cls=ff(vend.) then you're out -of luck, you have a device with vendor specific-interface:: - - D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2 - I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm - I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm - -In the system log you should see:: - - usb.c: USB new device connect, assigned device number 2 - usb.c: kmalloc IF c7691fa0, numif 1 - usb.c: kmalloc IF c7b5f3e0, numif 2 - usb.c: skipped 4 class/vendor specific interface descriptors - usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3 - usb.c: USB device number 2 default language ID 0x409 - Manufacturer: 3Com Inc. - Product: 3Com U.S. Robotics Pro ISDN TA - SerialNumber: UFT53A49BVT7 - acm.c: probing config 1 - acm.c: probing config 2 - ttyACM0: USB ACM device - acm.c: acm_control_msg: rq: 0x22 val: 0x0 len: 0x0 result: 0 - acm.c: acm_control_msg: rq: 0x20 val: 0x0 len: 0x7 result: 7 - usb.c: acm driver claimed interface c7b5f3e0 - usb.c: acm driver claimed interface c7b5f3f8 - usb.c: acm driver claimed interface c7691fa0 - -If all this seems to be OK, fire up minicom and set it to talk to the ttyACM -device and try typing 'at'. If it responds with 'OK', then everything is -working. diff --git a/Documentation/usb/authorization.rst b/Documentation/usb/authorization.rst new file mode 100644 index 000000000000..9e53909d04c2 --- /dev/null +++ b/Documentation/usb/authorization.rst @@ -0,0 +1,132 @@ +============================================================== +Authorizing (or not) your USB devices to connect to the system +============================================================== + +Copyright (C) 2007 Inaky Perez-Gonzalez Intel Corporation + +This feature allows you to control if a USB device can be used (or +not) in a system. This feature will allow you to implement a lock-down +of USB devices, fully controlled by user space. + +As of now, when a USB device is connected it is configured and +its interfaces are immediately made available to the users. With this +modification, only if root authorizes the device to be configured will +then it be possible to use it. + +Usage +===== + +Authorize a device to connect:: + + $ echo 1 > /sys/bus/usb/devices/DEVICE/authorized + +De-authorize a device:: + + $ echo 0 > /sys/bus/usb/devices/DEVICE/authorized + +Set new devices connected to hostX to be deauthorized by default (ie: +lock down):: + + $ echo 0 > /sys/bus/usb/devices/usbX/authorized_default + +Remove the lock down:: + + $ echo 1 > /sys/bus/usb/devices/usbX/authorized_default + +By default, Wired USB devices are authorized by default to +connect. Wireless USB hosts deauthorize by default all new connected +devices (this is so because we need to do an authentication phase +before authorizing). Writing "2" to the authorized_default attribute +causes kernel to only authorize by default devices connected to internal +USB ports. + + +Example system lockdown (lame) +------------------------------ + +Imagine you want to implement a lockdown so only devices of type XYZ +can be connected (for example, it is a kiosk machine with a visible +USB port):: + + boot up + rc.local -> + + for host in /sys/bus/usb/devices/usb* + do + echo 0 > $host/authorized_default + done + +Hookup an script to udev, for new USB devices:: + + if device_is_my_type $DEV + then + echo 1 > $device_path/authorized + done + + +Now, device_is_my_type() is where the juice for a lockdown is. Just +checking if the class, type and protocol match something is the worse +security verification you can make (or the best, for someone willing +to break it). If you need something secure, use crypto and Certificate +Authentication or stuff like that. Something simple for an storage key +could be:: + + function device_is_my_type() + { + echo 1 > authorized # temporarily authorize it + # FIXME: make sure none can mount it + mount DEVICENODE /mntpoint + sum=$(md5sum /mntpoint/.signature) + if [ $sum = $(cat /etc/lockdown/keysum) ] + then + echo "We are good, connected" + umount /mntpoint + # Other stuff so others can use it + else + echo 0 > authorized + fi + } + + +Of course, this is lame, you'd want to do a real certificate +verification stuff with PKI, so you don't depend on a shared secret, +etc, but you get the idea. Anybody with access to a device gadget kit +can fake descriptors and device info. Don't trust that. You are +welcome. + + +Interface authorization +----------------------- + +There is a similar approach to allow or deny specific USB interfaces. +That allows to block only a subset of an USB device. + +Authorize an interface:: + + $ echo 1 > /sys/bus/usb/devices/INTERFACE/authorized + +Deauthorize an interface:: + + $ echo 0 > /sys/bus/usb/devices/INTERFACE/authorized + +The default value for new interfaces +on a particular USB bus can be changed, too. + +Allow interfaces per default:: + + $ echo 1 > /sys/bus/usb/devices/usbX/interface_authorized_default + +Deny interfaces per default:: + + $ echo 0 > /sys/bus/usb/devices/usbX/interface_authorized_default + +Per default the interface_authorized_default bit is 1. +So all interfaces would authorized per default. + +Note: + If a deauthorized interface will be authorized so the driver probing must + be triggered manually by writing INTERFACE to /sys/bus/usb/drivers_probe + +For drivers that need multiple interfaces all needed interfaces should be +authorized first. After that the drivers should be probed. +This avoids side effects. diff --git a/Documentation/usb/authorization.txt b/Documentation/usb/authorization.txt deleted file mode 100644 index 9e53909d04c2..000000000000 --- a/Documentation/usb/authorization.txt +++ /dev/null @@ -1,132 +0,0 @@ -============================================================== -Authorizing (or not) your USB devices to connect to the system -============================================================== - -Copyright (C) 2007 Inaky Perez-Gonzalez Intel Corporation - -This feature allows you to control if a USB device can be used (or -not) in a system. This feature will allow you to implement a lock-down -of USB devices, fully controlled by user space. - -As of now, when a USB device is connected it is configured and -its interfaces are immediately made available to the users. With this -modification, only if root authorizes the device to be configured will -then it be possible to use it. - -Usage -===== - -Authorize a device to connect:: - - $ echo 1 > /sys/bus/usb/devices/DEVICE/authorized - -De-authorize a device:: - - $ echo 0 > /sys/bus/usb/devices/DEVICE/authorized - -Set new devices connected to hostX to be deauthorized by default (ie: -lock down):: - - $ echo 0 > /sys/bus/usb/devices/usbX/authorized_default - -Remove the lock down:: - - $ echo 1 > /sys/bus/usb/devices/usbX/authorized_default - -By default, Wired USB devices are authorized by default to -connect. Wireless USB hosts deauthorize by default all new connected -devices (this is so because we need to do an authentication phase -before authorizing). Writing "2" to the authorized_default attribute -causes kernel to only authorize by default devices connected to internal -USB ports. - - -Example system lockdown (lame) ------------------------------- - -Imagine you want to implement a lockdown so only devices of type XYZ -can be connected (for example, it is a kiosk machine with a visible -USB port):: - - boot up - rc.local -> - - for host in /sys/bus/usb/devices/usb* - do - echo 0 > $host/authorized_default - done - -Hookup an script to udev, for new USB devices:: - - if device_is_my_type $DEV - then - echo 1 > $device_path/authorized - done - - -Now, device_is_my_type() is where the juice for a lockdown is. Just -checking if the class, type and protocol match something is the worse -security verification you can make (or the best, for someone willing -to break it). If you need something secure, use crypto and Certificate -Authentication or stuff like that. Something simple for an storage key -could be:: - - function device_is_my_type() - { - echo 1 > authorized # temporarily authorize it - # FIXME: make sure none can mount it - mount DEVICENODE /mntpoint - sum=$(md5sum /mntpoint/.signature) - if [ $sum = $(cat /etc/lockdown/keysum) ] - then - echo "We are good, connected" - umount /mntpoint - # Other stuff so others can use it - else - echo 0 > authorized - fi - } - - -Of course, this is lame, you'd want to do a real certificate -verification stuff with PKI, so you don't depend on a shared secret, -etc, but you get the idea. Anybody with access to a device gadget kit -can fake descriptors and device info. Don't trust that. You are -welcome. - - -Interface authorization ------------------------ - -There is a similar approach to allow or deny specific USB interfaces. -That allows to block only a subset of an USB device. - -Authorize an interface:: - - $ echo 1 > /sys/bus/usb/devices/INTERFACE/authorized - -Deauthorize an interface:: - - $ echo 0 > /sys/bus/usb/devices/INTERFACE/authorized - -The default value for new interfaces -on a particular USB bus can be changed, too. - -Allow interfaces per default:: - - $ echo 1 > /sys/bus/usb/devices/usbX/interface_authorized_default - -Deny interfaces per default:: - - $ echo 0 > /sys/bus/usb/devices/usbX/interface_authorized_default - -Per default the interface_authorized_default bit is 1. -So all interfaces would authorized per default. - -Note: - If a deauthorized interface will be authorized so the driver probing must - be triggered manually by writing INTERFACE to /sys/bus/usb/drivers_probe - -For drivers that need multiple interfaces all needed interfaces should be -authorized first. After that the drivers should be probed. -This avoids side effects. diff --git a/Documentation/usb/chipidea.rst b/Documentation/usb/chipidea.rst new file mode 100644 index 000000000000..68473abe2823 --- /dev/null +++ b/Documentation/usb/chipidea.rst @@ -0,0 +1,133 @@ +============================================== +ChipIdea Highspeed Dual Role Controller Driver +============================================== + +1. How to test OTG FSM(HNP and SRP) +----------------------------------- + +To show how to demo OTG HNP and SRP functions via sys input files +with 2 Freescale i.MX6Q sabre SD boards. + +1.1 How to enable OTG FSM +------------------------- + +1.1.1 Select CONFIG_USB_OTG_FSM in menuconfig, rebuild kernel +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Image and modules. If you want to check some internal +variables for otg fsm, mount debugfs, there are 2 files +which can show otg fsm variables and some controller registers value:: + + cat /sys/kernel/debug/ci_hdrc.0/otg + cat /sys/kernel/debug/ci_hdrc.0/registers + +1.1.2 Add below entries in your dts file for your controller node +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +:: + + otg-rev = <0x0200>; + adp-disable; + +1.2 Test operations +------------------- + +1) Power up 2 Freescale i.MX6Q sabre SD boards with gadget class driver loaded + (e.g. g_mass_storage). + +2) Connect 2 boards with usb cable with one end is micro A plug, the other end + is micro B plug. + + The A-device(with micro A plug inserted) should enumerate B-device. + +3) Role switch + + On B-device:: + + echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req + + B-device should take host role and enumerate A-device. + +4) A-device switch back to host. + + On B-device:: + + echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req + + or, by introducing HNP polling, B-Host can know when A-peripheral wish + to be host role, so this role switch also can be trigged in A-peripheral + side by answering the polling from B-Host, this can be done on A-device:: + + echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req + + A-device should switch back to host and enumerate B-device. + +5) Remove B-device(unplug micro B plug) and insert again in 10 seconds, + A-device should enumerate B-device again. + +6) Remove B-device(unplug micro B plug) and insert again after 10 seconds, + A-device should NOT enumerate B-device. + + if A-device wants to use bus: + + On A-device:: + + echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop + echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req + + if B-device wants to use bus: + + On B-device:: + + echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req + +7) A-device power down the bus. + + On A-device:: + + echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop + + A-device should disconnect with B-device and power down the bus. + +8) B-device does data pulse for SRP. + + On B-device:: + + echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req + + A-device should resume usb bus and enumerate B-device. + +1.3 Reference document +---------------------- +"On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification +July 27, 2012 Revision 2.0 version 1.1a" + +2. How to enable USB as system wakeup source +-------------------------------------------- +Below is the example for how to enable USB as system wakeup source +at imx6 platform. + +2.1 Enable core's wakeup:: + + echo enabled > /sys/bus/platform/devices/ci_hdrc.0/power/wakeup + +2.2 Enable glue layer's wakeup:: + + echo enabled > /sys/bus/platform/devices/2184000.usb/power/wakeup + +2.3 Enable PHY's wakeup (optional):: + + echo enabled > /sys/bus/platform/devices/20c9000.usbphy/power/wakeup + +2.4 Enable roothub's wakeup:: + + echo enabled > /sys/bus/usb/devices/usb1/power/wakeup + +2.5 Enable related device's wakeup:: + + echo enabled > /sys/bus/usb/devices/1-1/power/wakeup + +If the system has only one usb port, and you want usb wakeup at this port, you +can use below script to enable usb wakeup:: + + for i in $(find /sys -name wakeup | grep usb);do echo enabled > $i;done; diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt deleted file mode 100644 index 68473abe2823..000000000000 --- a/Documentation/usb/chipidea.txt +++ /dev/null @@ -1,133 +0,0 @@ -============================================== -ChipIdea Highspeed Dual Role Controller Driver -============================================== - -1. How to test OTG FSM(HNP and SRP) ------------------------------------ - -To show how to demo OTG HNP and SRP functions via sys input files -with 2 Freescale i.MX6Q sabre SD boards. - -1.1 How to enable OTG FSM -------------------------- - -1.1.1 Select CONFIG_USB_OTG_FSM in menuconfig, rebuild kernel -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Image and modules. If you want to check some internal -variables for otg fsm, mount debugfs, there are 2 files -which can show otg fsm variables and some controller registers value:: - - cat /sys/kernel/debug/ci_hdrc.0/otg - cat /sys/kernel/debug/ci_hdrc.0/registers - -1.1.2 Add below entries in your dts file for your controller node -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -:: - - otg-rev = <0x0200>; - adp-disable; - -1.2 Test operations -------------------- - -1) Power up 2 Freescale i.MX6Q sabre SD boards with gadget class driver loaded - (e.g. g_mass_storage). - -2) Connect 2 boards with usb cable with one end is micro A plug, the other end - is micro B plug. - - The A-device(with micro A plug inserted) should enumerate B-device. - -3) Role switch - - On B-device:: - - echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req - - B-device should take host role and enumerate A-device. - -4) A-device switch back to host. - - On B-device:: - - echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req - - or, by introducing HNP polling, B-Host can know when A-peripheral wish - to be host role, so this role switch also can be trigged in A-peripheral - side by answering the polling from B-Host, this can be done on A-device:: - - echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req - - A-device should switch back to host and enumerate B-device. - -5) Remove B-device(unplug micro B plug) and insert again in 10 seconds, - A-device should enumerate B-device again. - -6) Remove B-device(unplug micro B plug) and insert again after 10 seconds, - A-device should NOT enumerate B-device. - - if A-device wants to use bus: - - On A-device:: - - echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop - echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req - - if B-device wants to use bus: - - On B-device:: - - echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req - -7) A-device power down the bus. - - On A-device:: - - echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop - - A-device should disconnect with B-device and power down the bus. - -8) B-device does data pulse for SRP. - - On B-device:: - - echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req - - A-device should resume usb bus and enumerate B-device. - -1.3 Reference document ----------------------- -"On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification -July 27, 2012 Revision 2.0 version 1.1a" - -2. How to enable USB as system wakeup source --------------------------------------------- -Below is the example for how to enable USB as system wakeup source -at imx6 platform. - -2.1 Enable core's wakeup:: - - echo enabled > /sys/bus/platform/devices/ci_hdrc.0/power/wakeup - -2.2 Enable glue layer's wakeup:: - - echo enabled > /sys/bus/platform/devices/2184000.usb/power/wakeup - -2.3 Enable PHY's wakeup (optional):: - - echo enabled > /sys/bus/platform/devices/20c9000.usbphy/power/wakeup - -2.4 Enable roothub's wakeup:: - - echo enabled > /sys/bus/usb/devices/usb1/power/wakeup - -2.5 Enable related device's wakeup:: - - echo enabled > /sys/bus/usb/devices/1-1/power/wakeup - -If the system has only one usb port, and you want usb wakeup at this port, you -can use below script to enable usb wakeup:: - - for i in $(find /sys -name wakeup | grep usb);do echo enabled > $i;done; diff --git a/Documentation/usb/dwc3.rst b/Documentation/usb/dwc3.rst new file mode 100644 index 000000000000..f94a7ba16573 --- /dev/null +++ b/Documentation/usb/dwc3.rst @@ -0,0 +1,53 @@ +=========== +DWC3 driver +=========== + + +TODO +~~~~ + +Please pick something while reading :) + +- Convert interrupt handler to per-ep-thread-irq + + As it turns out some DWC3-commands ~1ms to complete. Currently we spin + until the command completes which is bad. + + Implementation idea: + + - dwc core implements a demultiplexing irq chip for interrupts per + endpoint. The interrupt numbers are allocated during probe and belong + to the device. If MSI provides per-endpoint interrupt this dummy + interrupt chip can be replaced with "real" interrupts. + - interrupts are requested / allocated on usb_ep_enable() and removed on + usb_ep_disable(). Worst case are 32 interrupts, the lower limit is two + for ep0/1. + - dwc3_send_gadget_ep_cmd() will sleep in wait_for_completion_timeout() + until the command completes. + - the interrupt handler is split into the following pieces: + + - primary handler of the device + goes through every event and calls generic_handle_irq() for event + it. On return from generic_handle_irq() in acknowledges the event + counter so interrupt goes away (eventually). + + - threaded handler of the device + none + + - primary handler of the EP-interrupt + reads the event and tries to process it. Everything that requires + sleeping is handed over to the Thread. The event is saved in an + per-endpoint data-structure. + We probably have to pay attention not to process events once we + handed something to thread so we don't process event X prio Y + where X > Y. + + - threaded handler of the EP-interrupt + handles the remaining EP work which might sleep such as waiting + for command completion. + + Latency: + + There should be no increase in latency since the interrupt-thread has a + high priority and will be run before an average task in user land + (except the user changed priorities). diff --git a/Documentation/usb/dwc3.txt b/Documentation/usb/dwc3.txt deleted file mode 100644 index f94a7ba16573..000000000000 --- a/Documentation/usb/dwc3.txt +++ /dev/null @@ -1,53 +0,0 @@ -=========== -DWC3 driver -=========== - - -TODO -~~~~ - -Please pick something while reading :) - -- Convert interrupt handler to per-ep-thread-irq - - As it turns out some DWC3-commands ~1ms to complete. Currently we spin - until the command completes which is bad. - - Implementation idea: - - - dwc core implements a demultiplexing irq chip for interrupts per - endpoint. The interrupt numbers are allocated during probe and belong - to the device. If MSI provides per-endpoint interrupt this dummy - interrupt chip can be replaced with "real" interrupts. - - interrupts are requested / allocated on usb_ep_enable() and removed on - usb_ep_disable(). Worst case are 32 interrupts, the lower limit is two - for ep0/1. - - dwc3_send_gadget_ep_cmd() will sleep in wait_for_completion_timeout() - until the command completes. - - the interrupt handler is split into the following pieces: - - - primary handler of the device - goes through every event and calls generic_handle_irq() for event - it. On return from generic_handle_irq() in acknowledges the event - counter so interrupt goes away (eventually). - - - threaded handler of the device - none - - - primary handler of the EP-interrupt - reads the event and tries to process it. Everything that requires - sleeping is handed over to the Thread. The event is saved in an - per-endpoint data-structure. - We probably have to pay attention not to process events once we - handed something to thread so we don't process event X prio Y - where X > Y. - - - threaded handler of the EP-interrupt - handles the remaining EP work which might sleep such as waiting - for command completion. - - Latency: - - There should be no increase in latency since the interrupt-thread has a - high priority and will be run before an average task in user land - (except the user changed priorities). diff --git a/Documentation/usb/ehci.rst b/Documentation/usb/ehci.rst new file mode 100644 index 000000000000..31f650e7c1b4 --- /dev/null +++ b/Documentation/usb/ehci.rst @@ -0,0 +1,230 @@ +=========== +EHCI driver +=========== + +27-Dec-2002 + +The EHCI driver is used to talk to high speed USB 2.0 devices using +USB 2.0-capable host controller hardware. The USB 2.0 standard is +compatible with the USB 1.1 standard. It defines three transfer speeds: + + - "High Speed" 480 Mbit/sec (60 MByte/sec) + - "Full Speed" 12 Mbit/sec (1.5 MByte/sec) + - "Low Speed" 1.5 Mbit/sec + +USB 1.1 only addressed full speed and low speed. High speed devices +can be used on USB 1.1 systems, but they slow down to USB 1.1 speeds. + +USB 1.1 devices may also be used on USB 2.0 systems. When plugged +into an EHCI controller, they are given to a USB 1.1 "companion" +controller, which is a OHCI or UHCI controller as normally used with +such devices. When USB 1.1 devices plug into USB 2.0 hubs, they +interact with the EHCI controller through a "Transaction Translator" +(TT) in the hub, which turns low or full speed transactions into +high speed "split transactions" that don't waste transfer bandwidth. + +At this writing, this driver has been seen to work with implementations +of EHCI from (in alphabetical order): Intel, NEC, Philips, and VIA. +Other EHCI implementations are becoming available from other vendors; +you should expect this driver to work with them too. + +While usb-storage devices have been available since mid-2001 (working +quite speedily on the 2.4 version of this driver), hubs have only +been available since late 2001, and other kinds of high speed devices +appear to be on hold until more systems come with USB 2.0 built-in. +Such new systems have been available since early 2002, and became much +more typical in the second half of 2002. + +Note that USB 2.0 support involves more than just EHCI. It requires +other changes to the Linux-USB core APIs, including the hub driver, +but those changes haven't needed to really change the basic "usbcore" +APIs exposed to USB device drivers. + +- David Brownell + + + +Functionality +============= + +This driver is regularly tested on x86 hardware, and has also been +used on PPC hardware so big/little endianness issues should be gone. +It's believed to do all the right PCI magic so that I/O works even on +systems with interesting DMA mapping issues. + +Transfer Types +-------------- + +At this writing the driver should comfortably handle all control, bulk, +and interrupt transfers, including requests to USB 1.1 devices through +transaction translators (TTs) in USB 2.0 hubs. But you may find bugs. + +High Speed Isochronous (ISO) transfer support is also functional, but +at this writing no Linux drivers have been using that support. + +Full Speed Isochronous transfer support, through transaction translators, +is not yet available. Note that split transaction support for ISO +transfers can't share much code with the code for high speed ISO transfers, +since EHCI represents these with a different data structure. So for now, +most USB audio and video devices can't be connected to high speed buses. + +Driver Behavior +--------------- + +Transfers of all types can be queued. This means that control transfers +from a driver on one interface (or through usbfs) won't interfere with +ones from another driver, and that interrupt transfers can use periods +of one frame without risking data loss due to interrupt processing costs. + +The EHCI root hub code hands off USB 1.1 devices to its companion +controller. This driver doesn't need to know anything about those +drivers; a OHCI or UHCI driver that works already doesn't need to change +just because the EHCI driver is also present. + +There are some issues with power management; suspend/resume doesn't +behave quite right at the moment. + +Also, some shortcuts have been taken with the scheduling periodic +transactions (interrupt and isochronous transfers). These place some +limits on the number of periodic transactions that can be scheduled, +and prevent use of polling intervals of less than one frame. + + +Use by +====== + +Assuming you have an EHCI controller (on a PCI card or motherboard) +and have compiled this driver as a module, load this like:: + + # modprobe ehci-hcd + +and remove it by:: + + # rmmod ehci-hcd + +You should also have a driver for a "companion controller", such as +"ohci-hcd" or "uhci-hcd". In case of any trouble with the EHCI driver, +remove its module and then the driver for that companion controller will +take over (at lower speed) all the devices that were previously handled +by the EHCI driver. + +Module parameters (pass to "modprobe") include: + + log2_irq_thresh (default 0): + Log2 of default interrupt delay, in microframes. The default + value is 0, indicating 1 microframe (125 usec). Maximum value + is 6, indicating 2^6 = 64 microframes. This controls how often + the EHCI controller can issue interrupts. + +If you're using this driver on a 2.5 kernel, and you've enabled USB +debugging support, you'll see three files in the "sysfs" directory for +any EHCI controller: + + "async" + dumps the asynchronous schedule, used for control + and bulk transfers. Shows each active qh and the qtds + pending, usually one qtd per urb. (Look at it with + usb-storage doing disk I/O; watch the request queues!) + "periodic" + dumps the periodic schedule, used for interrupt + and isochronous transfers. Doesn't show qtds. + "registers" + show controller register state, and + +The contents of those files can help identify driver problems. + + +Device drivers shouldn't care whether they're running over EHCI or not, +but they may want to check for "usb_device->speed == USB_SPEED_HIGH". +High speed devices can do things that full speed (or low speed) ones +can't, such as "high bandwidth" periodic (interrupt or ISO) transfers. +Also, some values in device descriptors (such as polling intervals for +periodic transfers) use different encodings when operating at high speed. + +However, do make a point of testing device drivers through USB 2.0 hubs. +Those hubs report some failures, such as disconnections, differently when +transaction translators are in use; some drivers have been seen to behave +badly when they see different faults than OHCI or UHCI report. + + +Performance +=========== + +USB 2.0 throughput is gated by two main factors: how fast the host +controller can process requests, and how fast devices can respond to +them. The 480 Mbit/sec "raw transfer rate" is obeyed by all devices, +but aggregate throughput is also affected by issues like delays between +individual high speed packets, driver intelligence, and of course the +overall system load. Latency is also a performance concern. + +Bulk transfers are most often used where throughput is an issue. It's +good to keep in mind that bulk transfers are always in 512 byte packets, +and at most 13 of those fit into one USB 2.0 microframe. Eight USB 2.0 +microframes fit in a USB 1.1 frame; a microframe is 1 msec/8 = 125 usec. + +So more than 50 MByte/sec is available for bulk transfers, when both +hardware and device driver software allow it. Periodic transfer modes +(isochronous and interrupt) allow the larger packet sizes which let you +approach the quoted 480 MBit/sec transfer rate. + +Hardware Performance +-------------------- + +At this writing, individual USB 2.0 devices tend to max out at around +20 MByte/sec transfer rates. This is of course subject to change; +and some devices now go faster, while others go slower. + +The first NEC implementation of EHCI seems to have a hardware bottleneck +at around 28 MByte/sec aggregate transfer rate. While this is clearly +enough for a single device at 20 MByte/sec, putting three such devices +onto one bus does not get you 60 MByte/sec. The issue appears to be +that the controller hardware won't do concurrent USB and PCI access, +so that it's only trying six (or maybe seven) USB transactions each +microframe rather than thirteen. (Seems like a reasonable trade off +for a product that beat all the others to market by over a year!) + +It's expected that newer implementations will better this, throwing +more silicon real estate at the problem so that new motherboard chip +sets will get closer to that 60 MByte/sec target. That includes an +updated implementation from NEC, as well as other vendors' silicon. + +There's a minimum latency of one microframe (125 usec) for the host +to receive interrupts from the EHCI controller indicating completion +of requests. That latency is tunable; there's a module option. By +default ehci-hcd driver uses the minimum latency, which means that if +you issue a control or bulk request you can often expect to learn that +it completed in less than 250 usec (depending on transfer size). + +Software Performance +-------------------- + +To get even 20 MByte/sec transfer rates, Linux-USB device drivers will +need to keep the EHCI queue full. That means issuing large requests, +or using bulk queuing if a series of small requests needs to be issued. +When drivers don't do that, their performance results will show it. + +In typical situations, a usb_bulk_msg() loop writing out 4 KB chunks is +going to waste more than half the USB 2.0 bandwidth. Delays between the +I/O completion and the driver issuing the next request will take longer +than the I/O. If that same loop used 16 KB chunks, it'd be better; a +sequence of 128 KB chunks would waste a lot less. + +But rather than depending on such large I/O buffers to make synchronous +I/O be efficient, it's better to just queue up several (bulk) requests +to the HC, and wait for them all to complete (or be canceled on error). +Such URB queuing should work with all the USB 1.1 HC drivers too. + +In the Linux 2.5 kernels, new usb_sg_*() api calls have been defined; they +queue all the buffers from a scatterlist. They also use scatterlist DMA +mapping (which might apply an IOMMU) and IRQ reduction, all of which will +help make high speed transfers run as fast as they can. + + +TBD: + Interrupt and ISO transfer performance issues. Those periodic + transfers are fully scheduled, so the main issue is likely to be how + to trigger "high bandwidth" modes. + +TBD: + More than standard 80% periodic bandwidth allocation is possible + through sysfs uframe_periodic_max parameter. Describe that. diff --git a/Documentation/usb/ehci.txt b/Documentation/usb/ehci.txt deleted file mode 100644 index 31f650e7c1b4..000000000000 --- a/Documentation/usb/ehci.txt +++ /dev/null @@ -1,230 +0,0 @@ -=========== -EHCI driver -=========== - -27-Dec-2002 - -The EHCI driver is used to talk to high speed USB 2.0 devices using -USB 2.0-capable host controller hardware. The USB 2.0 standard is -compatible with the USB 1.1 standard. It defines three transfer speeds: - - - "High Speed" 480 Mbit/sec (60 MByte/sec) - - "Full Speed" 12 Mbit/sec (1.5 MByte/sec) - - "Low Speed" 1.5 Mbit/sec - -USB 1.1 only addressed full speed and low speed. High speed devices -can be used on USB 1.1 systems, but they slow down to USB 1.1 speeds. - -USB 1.1 devices may also be used on USB 2.0 systems. When plugged -into an EHCI controller, they are given to a USB 1.1 "companion" -controller, which is a OHCI or UHCI controller as normally used with -such devices. When USB 1.1 devices plug into USB 2.0 hubs, they -interact with the EHCI controller through a "Transaction Translator" -(TT) in the hub, which turns low or full speed transactions into -high speed "split transactions" that don't waste transfer bandwidth. - -At this writing, this driver has been seen to work with implementations -of EHCI from (in alphabetical order): Intel, NEC, Philips, and VIA. -Other EHCI implementations are becoming available from other vendors; -you should expect this driver to work with them too. - -While usb-storage devices have been available since mid-2001 (working -quite speedily on the 2.4 version of this driver), hubs have only -been available since late 2001, and other kinds of high speed devices -appear to be on hold until more systems come with USB 2.0 built-in. -Such new systems have been available since early 2002, and became much -more typical in the second half of 2002. - -Note that USB 2.0 support involves more than just EHCI. It requires -other changes to the Linux-USB core APIs, including the hub driver, -but those changes haven't needed to really change the basic "usbcore" -APIs exposed to USB device drivers. - -- David Brownell - - - -Functionality -============= - -This driver is regularly tested on x86 hardware, and has also been -used on PPC hardware so big/little endianness issues should be gone. -It's believed to do all the right PCI magic so that I/O works even on -systems with interesting DMA mapping issues. - -Transfer Types --------------- - -At this writing the driver should comfortably handle all control, bulk, -and interrupt transfers, including requests to USB 1.1 devices through -transaction translators (TTs) in USB 2.0 hubs. But you may find bugs. - -High Speed Isochronous (ISO) transfer support is also functional, but -at this writing no Linux drivers have been using that support. - -Full Speed Isochronous transfer support, through transaction translators, -is not yet available. Note that split transaction support for ISO -transfers can't share much code with the code for high speed ISO transfers, -since EHCI represents these with a different data structure. So for now, -most USB audio and video devices can't be connected to high speed buses. - -Driver Behavior ---------------- - -Transfers of all types can be queued. This means that control transfers -from a driver on one interface (or through usbfs) won't interfere with -ones from another driver, and that interrupt transfers can use periods -of one frame without risking data loss due to interrupt processing costs. - -The EHCI root hub code hands off USB 1.1 devices to its companion -controller. This driver doesn't need to know anything about those -drivers; a OHCI or UHCI driver that works already doesn't need to change -just because the EHCI driver is also present. - -There are some issues with power management; suspend/resume doesn't -behave quite right at the moment. - -Also, some shortcuts have been taken with the scheduling periodic -transactions (interrupt and isochronous transfers). These place some -limits on the number of periodic transactions that can be scheduled, -and prevent use of polling intervals of less than one frame. - - -Use by -====== - -Assuming you have an EHCI controller (on a PCI card or motherboard) -and have compiled this driver as a module, load this like:: - - # modprobe ehci-hcd - -and remove it by:: - - # rmmod ehci-hcd - -You should also have a driver for a "companion controller", such as -"ohci-hcd" or "uhci-hcd". In case of any trouble with the EHCI driver, -remove its module and then the driver for that companion controller will -take over (at lower speed) all the devices that were previously handled -by the EHCI driver. - -Module parameters (pass to "modprobe") include: - - log2_irq_thresh (default 0): - Log2 of default interrupt delay, in microframes. The default - value is 0, indicating 1 microframe (125 usec). Maximum value - is 6, indicating 2^6 = 64 microframes. This controls how often - the EHCI controller can issue interrupts. - -If you're using this driver on a 2.5 kernel, and you've enabled USB -debugging support, you'll see three files in the "sysfs" directory for -any EHCI controller: - - "async" - dumps the asynchronous schedule, used for control - and bulk transfers. Shows each active qh and the qtds - pending, usually one qtd per urb. (Look at it with - usb-storage doing disk I/O; watch the request queues!) - "periodic" - dumps the periodic schedule, used for interrupt - and isochronous transfers. Doesn't show qtds. - "registers" - show controller register state, and - -The contents of those files can help identify driver problems. - - -Device drivers shouldn't care whether they're running over EHCI or not, -but they may want to check for "usb_device->speed == USB_SPEED_HIGH". -High speed devices can do things that full speed (or low speed) ones -can't, such as "high bandwidth" periodic (interrupt or ISO) transfers. -Also, some values in device descriptors (such as polling intervals for -periodic transfers) use different encodings when operating at high speed. - -However, do make a point of testing device drivers through USB 2.0 hubs. -Those hubs report some failures, such as disconnections, differently when -transaction translators are in use; some drivers have been seen to behave -badly when they see different faults than OHCI or UHCI report. - - -Performance -=========== - -USB 2.0 throughput is gated by two main factors: how fast the host -controller can process requests, and how fast devices can respond to -them. The 480 Mbit/sec "raw transfer rate" is obeyed by all devices, -but aggregate throughput is also affected by issues like delays between -individual high speed packets, driver intelligence, and of course the -overall system load. Latency is also a performance concern. - -Bulk transfers are most often used where throughput is an issue. It's -good to keep in mind that bulk transfers are always in 512 byte packets, -and at most 13 of those fit into one USB 2.0 microframe. Eight USB 2.0 -microframes fit in a USB 1.1 frame; a microframe is 1 msec/8 = 125 usec. - -So more than 50 MByte/sec is available for bulk transfers, when both -hardware and device driver software allow it. Periodic transfer modes -(isochronous and interrupt) allow the larger packet sizes which let you -approach the quoted 480 MBit/sec transfer rate. - -Hardware Performance --------------------- - -At this writing, individual USB 2.0 devices tend to max out at around -20 MByte/sec transfer rates. This is of course subject to change; -and some devices now go faster, while others go slower. - -The first NEC implementation of EHCI seems to have a hardware bottleneck -at around 28 MByte/sec aggregate transfer rate. While this is clearly -enough for a single device at 20 MByte/sec, putting three such devices -onto one bus does not get you 60 MByte/sec. The issue appears to be -that the controller hardware won't do concurrent USB and PCI access, -so that it's only trying six (or maybe seven) USB transactions each -microframe rather than thirteen. (Seems like a reasonable trade off -for a product that beat all the others to market by over a year!) - -It's expected that newer implementations will better this, throwing -more silicon real estate at the problem so that new motherboard chip -sets will get closer to that 60 MByte/sec target. That includes an -updated implementation from NEC, as well as other vendors' silicon. - -There's a minimum latency of one microframe (125 usec) for the host -to receive interrupts from the EHCI controller indicating completion -of requests. That latency is tunable; there's a module option. By -default ehci-hcd driver uses the minimum latency, which means that if -you issue a control or bulk request you can often expect to learn that -it completed in less than 250 usec (depending on transfer size). - -Software Performance --------------------- - -To get even 20 MByte/sec transfer rates, Linux-USB device drivers will -need to keep the EHCI queue full. That means issuing large requests, -or using bulk queuing if a series of small requests needs to be issued. -When drivers don't do that, their performance results will show it. - -In typical situations, a usb_bulk_msg() loop writing out 4 KB chunks is -going to waste more than half the USB 2.0 bandwidth. Delays between the -I/O completion and the driver issuing the next request will take longer -than the I/O. If that same loop used 16 KB chunks, it'd be better; a -sequence of 128 KB chunks would waste a lot less. - -But rather than depending on such large I/O buffers to make synchronous -I/O be efficient, it's better to just queue up several (bulk) requests -to the HC, and wait for them all to complete (or be canceled on error). -Such URB queuing should work with all the USB 1.1 HC drivers too. - -In the Linux 2.5 kernels, new usb_sg_*() api calls have been defined; they -queue all the buffers from a scatterlist. They also use scatterlist DMA -mapping (which might apply an IOMMU) and IRQ reduction, all of which will -help make high speed transfers run as fast as they can. - - -TBD: - Interrupt and ISO transfer performance issues. Those periodic - transfers are fully scheduled, so the main issue is likely to be how - to trigger "high bandwidth" modes. - -TBD: - More than standard 80% periodic bandwidth allocation is possible - through sysfs uframe_periodic_max parameter. Describe that. diff --git a/Documentation/usb/functionfs.rst b/Documentation/usb/functionfs.rst new file mode 100644 index 000000000000..7fdc6d840ac5 --- /dev/null +++ b/Documentation/usb/functionfs.rst @@ -0,0 +1,68 @@ +==================== +How FunctionFS works +==================== + +From kernel point of view it is just a composite function with some +unique behaviour. It may be added to an USB configuration only after +the user space driver has registered by writing descriptors and +strings (the user space program has to provide the same information +that kernel level composite functions provide when they are added to +the configuration). + +This in particular means that the composite initialisation functions +may not be in init section (ie. may not use the __init tag). + +From user space point of view it is a file system which when +mounted provides an "ep0" file. User space driver need to +write descriptors and strings to that file. It does not need +to worry about endpoints, interfaces or strings numbers but +simply provide descriptors such as if the function was the +only one (endpoints and strings numbers starting from one and +interface numbers starting from zero). The FunctionFS changes +them as needed also handling situation when numbers differ in +different configurations. + +When descriptors and strings are written "ep#" files appear +(one for each declared endpoint) which handle communication on +a single endpoint. Again, FunctionFS takes care of the real +numbers and changing of the configuration (which means that +"ep1" file may be really mapped to (say) endpoint 3 (and when +configuration changes to (say) endpoint 2)). "ep0" is used +for receiving events and handling setup requests. + +When all files are closed the function disables itself. + +What I also want to mention is that the FunctionFS is designed in such +a way that it is possible to mount it several times so in the end +a gadget could use several FunctionFS functions. The idea is that +each FunctionFS instance is identified by the device name used +when mounting. + +One can imagine a gadget that has an Ethernet, MTP and HID interfaces +where the last two are implemented via FunctionFS. On user space +level it would look like this:: + + $ insmod g_ffs.ko idVendor= iSerialNumber= functions=mtp,hid + $ mkdir /dev/ffs-mtp && mount -t functionfs mtp /dev/ffs-mtp + $ ( cd /dev/ffs-mtp && mtp-daemon ) & + $ mkdir /dev/ffs-hid && mount -t functionfs hid /dev/ffs-hid + $ ( cd /dev/ffs-hid && hid-daemon ) & + +On kernel level the gadget checks ffs_data->dev_name to identify +whether it's FunctionFS designed for MTP ("mtp") or HID ("hid"). + +If no "functions" module parameters is supplied, the driver accepts +just one function with any name. + +When "functions" module parameter is supplied, only functions +with listed names are accepted. In particular, if the "functions" +parameter's value is just a one-element list, then the behaviour +is similar to when there is no "functions" at all; however, +only a function with the specified name is accepted. + +The gadget is registered only after all the declared function +filesystems have been mounted and USB descriptors of all functions +have been written to their ep0's. + +Conversely, the gadget is unregistered after the first USB function +closes its endpoints. diff --git a/Documentation/usb/functionfs.txt b/Documentation/usb/functionfs.txt deleted file mode 100644 index 7fdc6d840ac5..000000000000 --- a/Documentation/usb/functionfs.txt +++ /dev/null @@ -1,68 +0,0 @@ -==================== -How FunctionFS works -==================== - -From kernel point of view it is just a composite function with some -unique behaviour. It may be added to an USB configuration only after -the user space driver has registered by writing descriptors and -strings (the user space program has to provide the same information -that kernel level composite functions provide when they are added to -the configuration). - -This in particular means that the composite initialisation functions -may not be in init section (ie. may not use the __init tag). - -From user space point of view it is a file system which when -mounted provides an "ep0" file. User space driver need to -write descriptors and strings to that file. It does not need -to worry about endpoints, interfaces or strings numbers but -simply provide descriptors such as if the function was the -only one (endpoints and strings numbers starting from one and -interface numbers starting from zero). The FunctionFS changes -them as needed also handling situation when numbers differ in -different configurations. - -When descriptors and strings are written "ep#" files appear -(one for each declared endpoint) which handle communication on -a single endpoint. Again, FunctionFS takes care of the real -numbers and changing of the configuration (which means that -"ep1" file may be really mapped to (say) endpoint 3 (and when -configuration changes to (say) endpoint 2)). "ep0" is used -for receiving events and handling setup requests. - -When all files are closed the function disables itself. - -What I also want to mention is that the FunctionFS is designed in such -a way that it is possible to mount it several times so in the end -a gadget could use several FunctionFS functions. The idea is that -each FunctionFS instance is identified by the device name used -when mounting. - -One can imagine a gadget that has an Ethernet, MTP and HID interfaces -where the last two are implemented via FunctionFS. On user space -level it would look like this:: - - $ insmod g_ffs.ko idVendor= iSerialNumber= functions=mtp,hid - $ mkdir /dev/ffs-mtp && mount -t functionfs mtp /dev/ffs-mtp - $ ( cd /dev/ffs-mtp && mtp-daemon ) & - $ mkdir /dev/ffs-hid && mount -t functionfs hid /dev/ffs-hid - $ ( cd /dev/ffs-hid && hid-daemon ) & - -On kernel level the gadget checks ffs_data->dev_name to identify -whether it's FunctionFS designed for MTP ("mtp") or HID ("hid"). - -If no "functions" module parameters is supplied, the driver accepts -just one function with any name. - -When "functions" module parameter is supplied, only functions -with listed names are accepted. In particular, if the "functions" -parameter's value is just a one-element list, then the behaviour -is similar to when there is no "functions" at all; however, -only a function with the specified name is accepted. - -The gadget is registered only after all the declared function -filesystems have been mounted and USB descriptors of all functions -have been written to their ep0's. - -Conversely, the gadget is unregistered after the first USB function -closes its endpoints. diff --git a/Documentation/usb/gadget-testing.rst b/Documentation/usb/gadget-testing.rst new file mode 100644 index 000000000000..2eeb3e9299e4 --- /dev/null +++ b/Documentation/usb/gadget-testing.rst @@ -0,0 +1,934 @@ +============== +Gadget Testing +============== + +This file summarizes information on basic testing of USB functions +provided by gadgets. + +.. contents + + 1. ACM function + 2. ECM function + 3. ECM subset function + 4. EEM function + 5. FFS function + 6. HID function + 7. LOOPBACK function + 8. MASS STORAGE function + 9. MIDI function + 10. NCM function + 11. OBEX function + 12. PHONET function + 13. RNDIS function + 14. SERIAL function + 15. SOURCESINK function + 16. UAC1 function (legacy implementation) + 17. UAC2 function + 18. UVC function + 19. PRINTER function + 20. UAC1 function (new API) + + +1. ACM function +=============== + +The function is provided by usb_f_acm.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "acm". +The ACM function provides just one attribute in its function directory: + + port_num + +The attribute is read-only. + +There can be at most 4 ACM/generic serial/OBEX ports in the system. + + +Testing the ACM function +------------------------ + +On the host:: + + cat > /dev/ttyACM + +On the device:: + + cat /dev/ttyGS + +then the other way round + +On the device:: + + cat > /dev/ttyGS + +On the host:: + + cat /dev/ttyACM + +2. ECM function +=============== + +The function is provided by usb_f_ecm.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "ecm". +The ECM function provides these attributes in its function directory: + + =============== ================================================== + ifname network device interface name associated with this + function instance + qmult queue length multiplier for high and super speed + host_addr MAC address of host's end of this + Ethernet over USB link + dev_addr MAC address of device's end of this + Ethernet over USB link + =============== ================================================== + +and after creating the functions/ecm. they contain default +values: qmult is 5, dev_addr and host_addr are randomly selected. +Except for ifname they can be written to until the function is linked to a +configuration. The ifname is read-only and contains the name of the interface +which was assigned by the net core, e. g. usb0. + +Testing the ECM function +------------------------ + +Configure IP addresses of the device and the host. Then: + +On the device:: + + ping + +On the host:: + + ping + +3. ECM subset function +====================== + +The function is provided by usb_f_ecm_subset.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "geth". +The ECM subset function provides these attributes in its function directory: + + =============== ================================================== + ifname network device interface name associated with this + function instance + qmult queue length multiplier for high and super speed + host_addr MAC address of host's end of this + Ethernet over USB link + dev_addr MAC address of device's end of this + Ethernet over USB link + =============== ================================================== + +and after creating the functions/ecm. they contain default +values: qmult is 5, dev_addr and host_addr are randomly selected. +Except for ifname they can be written to until the function is linked to a +configuration. The ifname is read-only and contains the name of the interface +which was assigned by the net core, e. g. usb0. + +Testing the ECM subset function +------------------------------- + +Configure IP addresses of the device and the host. Then: + +On the device:: + + ping + +On the host:: + + ping + +4. EEM function +=============== + +The function is provided by usb_f_eem.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "eem". +The EEM function provides these attributes in its function directory: + + =============== ================================================== + ifname network device interface name associated with this + function instance + qmult queue length multiplier for high and super speed + host_addr MAC address of host's end of this + Ethernet over USB link + dev_addr MAC address of device's end of this + Ethernet over USB link + =============== ================================================== + +and after creating the functions/eem. they contain default +values: qmult is 5, dev_addr and host_addr are randomly selected. +Except for ifname they can be written to until the function is linked to a +configuration. The ifname is read-only and contains the name of the interface +which was assigned by the net core, e. g. usb0. + +Testing the EEM function +------------------------ + +Configure IP addresses of the device and the host. Then: + +On the device:: + + ping + +On the host:: + + ping + +5. FFS function +=============== + +The function is provided by usb_f_fs.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "ffs". +The function directory is intentionally empty and not modifiable. + +After creating the directory there is a new instance (a "device") of FunctionFS +available in the system. Once a "device" is available, the user should follow +the standard procedure for using FunctionFS (mount it, run the userspace +process which implements the function proper). The gadget should be enabled +by writing a suitable string to usb_gadget//UDC. + +Testing the FFS function +------------------------ + +On the device: start the function's userspace daemon, enable the gadget + +On the host: use the USB function provided by the device + +6. HID function +=============== + +The function is provided by usb_f_hid.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "hid". +The HID function provides these attributes in its function directory: + + =============== =========================================== + protocol HID protocol to use + report_desc data to be used in HID reports, except data + passed with /dev/hidg + report_length HID report length + subclass HID subclass to use + =============== =========================================== + +For a keyboard the protocol and the subclass are 1, the report_length is 8, +while the report_desc is:: + + $ hd my_report_desc + 00000000 05 01 09 06 a1 01 05 07 19 e0 29 e7 15 00 25 01 |..........)...%.| + 00000010 75 01 95 08 81 02 95 01 75 08 81 03 95 05 75 01 |u.......u.....u.| + 00000020 05 08 19 01 29 05 91 02 95 01 75 03 91 03 95 06 |....).....u.....| + 00000030 75 08 15 00 25 65 05 07 19 00 29 65 81 00 c0 |u...%e....)e...| + 0000003f + +Such a sequence of bytes can be stored to the attribute with echo:: + + $ echo -ne \\x05\\x01\\x09\\x06\\xa1..... + +Testing the HID function +------------------------ + +Device: + +- create the gadget +- connect the gadget to a host, preferably not the one used + to control the gadget +- run a program which writes to /dev/hidg, e.g. + a userspace program found in Documentation/usb/gadget_hid.rst:: + + $ ./hid_gadget_test /dev/hidg0 keyboard + +Host: + +- observe the keystrokes from the gadget + +7. LOOPBACK function +==================== + +The function is provided by usb_f_ss_lb.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "Loopback". +The LOOPBACK function provides these attributes in its function directory: + + =============== ======================= + qlen depth of loopback queue + bulk_buflen buffer length + =============== ======================= + +Testing the LOOPBACK function +----------------------------- + +device: run the gadget + +host: test-usb (tools/usb/testusb.c) + +8. MASS STORAGE function +======================== + +The function is provided by usb_f_mass_storage.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "mass_storage". +The MASS STORAGE function provides these attributes in its directory: +files: + + =============== ============================================== + stall Set to permit function to halt bulk endpoints. + Disabled on some USB devices known not to work + correctly. You should set it to true. + num_buffers Number of pipeline buffers. Valid numbers + are 2..4. Available only if + CONFIG_USB_GADGET_DEBUG_FILES is set. + =============== ============================================== + +and a default lun.0 directory corresponding to SCSI LUN #0. + +A new lun can be added with mkdir:: + + $ mkdir functions/mass_storage.0/partition.5 + +Lun numbering does not have to be continuous, except for lun #0 which is +created by default. A maximum of 8 luns can be specified and they all must be +named following the . scheme. The numbers can be 0..8. +Probably a good convention is to name the luns "lun.", +although it is not mandatory. + +In each lun directory there are the following attribute files: + + =============== ============================================== + file The path to the backing file for the LUN. + Required if LUN is not marked as removable. + ro Flag specifying access to the LUN shall be + read-only. This is implied if CD-ROM emulation + is enabled as well as when it was impossible + to open "filename" in R/W mode. + removable Flag specifying that LUN shall be indicated as + being removable. + cdrom Flag specifying that LUN shall be reported as + being a CD-ROM. + nofua Flag specifying that FUA flag + in SCSI WRITE(10,12) + =============== ============================================== + +Testing the MASS STORAGE function +--------------------------------- + +device: connect the gadget, enable it +host: dmesg, see the USB drives appear (if system configured to automatically +mount) + +9. MIDI function +================ + +The function is provided by usb_f_midi.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "midi". +The MIDI function provides these attributes in its function directory: + + =============== ==================================== + buflen MIDI buffer length + id ID string for the USB MIDI adapter + in_ports number of MIDI input ports + index index value for the USB MIDI adapter + out_ports number of MIDI output ports + qlen USB read request queue length + =============== ==================================== + +Testing the MIDI function +------------------------- + +There are two cases: playing a mid from the gadget to +the host and playing a mid from the host to the gadget. + +1) Playing a mid from the gadget to the host: + +host:: + + $ arecordmidi -l + Port Client name Port name + 14:0 Midi Through Midi Through Port-0 + 24:0 MIDI Gadget MIDI Gadget MIDI 1 + $ arecordmidi -p 24:0 from_gadget.mid + +gadget:: + + $ aplaymidi -l + Port Client name Port name + 20:0 f_midi f_midi + + $ aplaymidi -p 20:0 to_host.mid + +2) Playing a mid from the host to the gadget + +gadget:: + + $ arecordmidi -l + Port Client name Port name + 20:0 f_midi f_midi + + $ arecordmidi -p 20:0 from_host.mid + +host:: + + $ aplaymidi -l + Port Client name Port name + 14:0 Midi Through Midi Through Port-0 + 24:0 MIDI Gadget MIDI Gadget MIDI 1 + + $ aplaymidi -p24:0 to_gadget.mid + +The from_gadget.mid should sound identical to the to_host.mid. + +The from_host.id should sound identical to the to_gadget.mid. + +MIDI files can be played to speakers/headphones with e.g. timidity installed:: + + $ aplaymidi -l + Port Client name Port name + 14:0 Midi Through Midi Through Port-0 + 24:0 MIDI Gadget MIDI Gadget MIDI 1 + 128:0 TiMidity TiMidity port 0 + 128:1 TiMidity TiMidity port 1 + 128:2 TiMidity TiMidity port 2 + 128:3 TiMidity TiMidity port 3 + + $ aplaymidi -p 128:0 file.mid + +MIDI ports can be logically connected using the aconnect utility, e.g.:: + + $ aconnect 24:0 128:0 # try it on the host + +After the gadget's MIDI port is connected to timidity's MIDI port, +whatever is played at the gadget side with aplaymidi -l is audible +in host's speakers/headphones. + +10. NCM function +================ + +The function is provided by usb_f_ncm.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "ncm". +The NCM function provides these attributes in its function directory: + + =============== ================================================== + ifname network device interface name associated with this + function instance + qmult queue length multiplier for high and super speed + host_addr MAC address of host's end of this + Ethernet over USB link + dev_addr MAC address of device's end of this + Ethernet over USB link + =============== ================================================== + +and after creating the functions/ncm. they contain default +values: qmult is 5, dev_addr and host_addr are randomly selected. +Except for ifname they can be written to until the function is linked to a +configuration. The ifname is read-only and contains the name of the interface +which was assigned by the net core, e. g. usb0. + +Testing the NCM function +------------------------ + +Configure IP addresses of the device and the host. Then: + +On the device:: + + ping + +On the host:: + + ping + +11. OBEX function +================= + +The function is provided by usb_f_obex.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "obex". +The OBEX function provides just one attribute in its function directory: + + port_num + +The attribute is read-only. + +There can be at most 4 ACM/generic serial/OBEX ports in the system. + +Testing the OBEX function +------------------------- + +On device:: + + seriald -f /dev/ttyGS -s 1024 + +On host:: + + serialc -v -p -i -a1 -s1024 \ + -t -r + +where seriald and serialc are Felipe's utilities found here: + + https://github.com/felipebalbi/usb-tools.git master + +12. PHONET function +=================== + +The function is provided by usb_f_phonet.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "phonet". +The PHONET function provides just one attribute in its function directory: + + =============== ================================================== + ifname network device interface name associated with this + function instance + =============== ================================================== + +Testing the PHONET function +--------------------------- + +It is not possible to test the SOCK_STREAM protocol without a specific piece +of hardware, so only SOCK_DGRAM has been tested. For the latter to work, +in the past I had to apply the patch mentioned here: + +http://www.spinics.net/lists/linux-usb/msg85689.html + +These tools are required: + +git://git.gitorious.org/meego-cellular/phonet-utils.git + +On the host:: + + $ ./phonet -a 0x10 -i usbpn0 + $ ./pnroute add 0x6c usbpn0 + $./pnroute add 0x10 usbpn0 + $ ifconfig usbpn0 up + +On the device:: + + $ ./phonet -a 0x6c -i upnlink0 + $ ./pnroute add 0x10 upnlink0 + $ ifconfig upnlink0 up + +Then a test program can be used:: + + http://www.spinics.net/lists/linux-usb/msg85690.html + +On the device:: + + $ ./pnxmit -a 0x6c -r + +On the host:: + + $ ./pnxmit -a 0x10 -s 0x6c + +As a result some data should be sent from host to device. +Then the other way round: + +On the host:: + + $ ./pnxmit -a 0x10 -r + +On the device:: + + $ ./pnxmit -a 0x6c -s 0x10 + +13. RNDIS function +================== + +The function is provided by usb_f_rndis.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "rndis". +The RNDIS function provides these attributes in its function directory: + + =============== ================================================== + ifname network device interface name associated with this + function instance + qmult queue length multiplier for high and super speed + host_addr MAC address of host's end of this + Ethernet over USB link + dev_addr MAC address of device's end of this + Ethernet over USB link + =============== ================================================== + +and after creating the functions/rndis. they contain default +values: qmult is 5, dev_addr and host_addr are randomly selected. +Except for ifname they can be written to until the function is linked to a +configuration. The ifname is read-only and contains the name of the interface +which was assigned by the net core, e. g. usb0. + +Testing the RNDIS function +-------------------------- + +Configure IP addresses of the device and the host. Then: + +On the device:: + + ping + +On the host:: + + ping + +14. SERIAL function +=================== + +The function is provided by usb_f_gser.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "gser". +The SERIAL function provides just one attribute in its function directory: + + port_num + +The attribute is read-only. + +There can be at most 4 ACM/generic serial/OBEX ports in the system. + +Testing the SERIAL function +--------------------------- + +On host:: + + insmod usbserial + echo VID PID >/sys/bus/usb-serial/drivers/generic/new_id + +On host:: + + cat > /dev/ttyUSB + +On target:: + + cat /dev/ttyGS + +then the other way round + +On target:: + + cat > /dev/ttyGS + +On host:: + + cat /dev/ttyUSB + +15. SOURCESINK function +======================= + +The function is provided by usb_f_ss_lb.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "SourceSink". +The SOURCESINK function provides these attributes in its function directory: + + =============== ================================== + pattern 0 (all zeros), 1 (mod63), 2 (none) + isoc_interval 1..16 + isoc_maxpacket 0 - 1023 (fs), 0 - 1024 (hs/ss) + isoc_mult 0..2 (hs/ss only) + isoc_maxburst 0..15 (ss only) + bulk_buflen buffer length + bulk_qlen depth of queue for bulk + iso_qlen depth of queue for iso + =============== ================================== + +Testing the SOURCESINK function +------------------------------- + +device: run the gadget + +host: test-usb (tools/usb/testusb.c) + + +16. UAC1 function (legacy implementation) +========================================= + +The function is provided by usb_f_uac1_legacy.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory +is "uac1_legacy". +The uac1 function provides these attributes in its function directory: + + =============== ==================================== + audio_buf_size audio buffer size + fn_cap capture pcm device file name + fn_cntl control device file name + fn_play playback pcm device file name + req_buf_size ISO OUT endpoint request buffer size + req_count ISO OUT endpoint request count + =============== ==================================== + +The attributes have sane default values. + +Testing the UAC1 function +------------------------- + +device: run the gadget + +host:: + + aplay -l # should list our USB Audio Gadget + +17. UAC2 function +================= + +The function is provided by usb_f_uac2.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "uac2". +The uac2 function provides these attributes in its function directory: + + =============== ==================================================== + c_chmask capture channel mask + c_srate capture sampling rate + c_ssize capture sample size (bytes) + p_chmask playback channel mask + p_srate playback sampling rate + p_ssize playback sample size (bytes) + req_number the number of pre-allocated request for both capture + and playback + =============== ==================================================== + +The attributes have sane default values. + +Testing the UAC2 function +------------------------- + +device: run the gadget +host: aplay -l # should list our USB Audio Gadget + +This function does not require real hardware support, it just +sends a stream of audio data to/from the host. In order to +actually hear something at the device side, a command similar +to this must be used at the device side:: + + $ arecord -f dat -t wav -D hw:2,0 | aplay -D hw:0,0 & + +e.g.:: + + $ arecord -f dat -t wav -D hw:CARD=UAC2Gadget,DEV=0 | \ + aplay -D default:CARD=OdroidU3 + +18. UVC function +================ + +The function is provided by usb_f_uvc.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "uvc". +The uvc function provides these attributes in its function directory: + + =================== ================================================ + streaming_interval interval for polling endpoint for data transfers + streaming_maxburst bMaxBurst for super speed companion descriptor + streaming_maxpacket maximum packet size this endpoint is capable of + sending or receiving when this configuration is + selected + =================== ================================================ + +There are also "control" and "streaming" subdirectories, each of which contain +a number of their subdirectories. There are some sane defaults provided, but +the user must provide the following: + + ================== ==================================================== + control header create in control/header, link from control/class/fs + and/or control/class/ss + streaming header create in streaming/header, link from + streaming/class/fs and/or streaming/class/hs and/or + streaming/class/ss + format description create in streaming/mjpeg and/or + streaming/uncompressed + frame description create in streaming/mjpeg/ and/or in + streaming/uncompressed/ + ================== ==================================================== + +Each frame description contains frame interval specification, and each +such specification consists of a number of lines with an inverval value +in each line. The rules stated above are best illustrated with an example:: + + # mkdir functions/uvc.usb0/control/header/h + # cd functions/uvc.usb0/control/ + # ln -s header/h class/fs + # ln -s header/h class/ss + # mkdir -p functions/uvc.usb0/streaming/uncompressed/u/360p + # cat < functions/uvc.usb0/streaming/uncompressed/u/360p/dwFrameInterval + 666666 + 1000000 + 5000000 + EOF + # cd $GADGET_CONFIGFS_ROOT + # mkdir functions/uvc.usb0/streaming/header/h + # cd functions/uvc.usb0/streaming/header/h + # ln -s ../../uncompressed/u + # cd ../../class/fs + # ln -s ../../header/h + # cd ../../class/hs + # ln -s ../../header/h + # cd ../../class/ss + # ln -s ../../header/h + + +Testing the UVC function +------------------------ + +device: run the gadget, modprobe vivid:: + + # uvc-gadget -u /dev/video -v /dev/video + +where uvc-gadget is this program: + http://git.ideasonboard.org/uvc-gadget.git + +with these patches: + + http://www.spinics.net/lists/linux-usb/msg99220.html + +host:: + + luvcview -f yuv + +19. PRINTER function +==================== + +The function is provided by usb_f_printer.ko module. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "printer". +The printer function provides these attributes in its function directory: + + ========== =========================================== + pnp_string Data to be passed to the host in pnp string + q_len Number of requests per endpoint + ========== =========================================== + +Testing the PRINTER function +---------------------------- + +The most basic testing: + +device: run the gadget:: + + # ls -l /devices/virtual/usb_printer_gadget/ + +should show g_printer. + +If udev is active, then /dev/g_printer should appear automatically. + +host: + +If udev is active, then e.g. /dev/usb/lp0 should appear. + +host->device transmission: + +device:: + + # cat /dev/g_printer + +host:: + + # cat > /dev/usb/lp0 + +device->host transmission:: + + # cat > /dev/g_printer + +host:: + + # cat /dev/usb/lp0 + +More advanced testing can be done with the prn_example +described in Documentation/usb/gadget_printer.rst. + + +20. UAC1 function (virtual ALSA card, using u_audio API) +======================================================== + +The function is provided by usb_f_uac1.ko module. +It will create a virtual ALSA card and the audio streams are simply +sinked to and sourced from it. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "uac1". +The uac1 function provides these attributes in its function directory: + + ========== ==================================================== + c_chmask capture channel mask + c_srate capture sampling rate + c_ssize capture sample size (bytes) + p_chmask playback channel mask + p_srate playback sampling rate + p_ssize playback sample size (bytes) + req_number the number of pre-allocated request for both capture + and playback + ========== ==================================================== + +The attributes have sane default values. + +Testing the UAC1 function +------------------------- + +device: run the gadget +host: aplay -l # should list our USB Audio Gadget + +This function does not require real hardware support, it just +sends a stream of audio data to/from the host. In order to +actually hear something at the device side, a command similar +to this must be used at the device side:: + + $ arecord -f dat -t wav -D hw:2,0 | aplay -D hw:0,0 & + +e.g.:: + + $ arecord -f dat -t wav -D hw:CARD=UAC1Gadget,DEV=0 | \ + aplay -D default:CARD=OdroidU3 diff --git a/Documentation/usb/gadget-testing.txt b/Documentation/usb/gadget-testing.txt deleted file mode 100644 index 7d7f2340af42..000000000000 --- a/Documentation/usb/gadget-testing.txt +++ /dev/null @@ -1,934 +0,0 @@ -============== -Gadget Testing -============== - -This file summarizes information on basic testing of USB functions -provided by gadgets. - -.. contents - - 1. ACM function - 2. ECM function - 3. ECM subset function - 4. EEM function - 5. FFS function - 6. HID function - 7. LOOPBACK function - 8. MASS STORAGE function - 9. MIDI function - 10. NCM function - 11. OBEX function - 12. PHONET function - 13. RNDIS function - 14. SERIAL function - 15. SOURCESINK function - 16. UAC1 function (legacy implementation) - 17. UAC2 function - 18. UVC function - 19. PRINTER function - 20. UAC1 function (new API) - - -1. ACM function -=============== - -The function is provided by usb_f_acm.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "acm". -The ACM function provides just one attribute in its function directory: - - port_num - -The attribute is read-only. - -There can be at most 4 ACM/generic serial/OBEX ports in the system. - - -Testing the ACM function ------------------------- - -On the host:: - - cat > /dev/ttyACM - -On the device:: - - cat /dev/ttyGS - -then the other way round - -On the device:: - - cat > /dev/ttyGS - -On the host:: - - cat /dev/ttyACM - -2. ECM function -=============== - -The function is provided by usb_f_ecm.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "ecm". -The ECM function provides these attributes in its function directory: - - =============== ================================================== - ifname network device interface name associated with this - function instance - qmult queue length multiplier for high and super speed - host_addr MAC address of host's end of this - Ethernet over USB link - dev_addr MAC address of device's end of this - Ethernet over USB link - =============== ================================================== - -and after creating the functions/ecm. they contain default -values: qmult is 5, dev_addr and host_addr are randomly selected. -Except for ifname they can be written to until the function is linked to a -configuration. The ifname is read-only and contains the name of the interface -which was assigned by the net core, e. g. usb0. - -Testing the ECM function ------------------------- - -Configure IP addresses of the device and the host. Then: - -On the device:: - - ping - -On the host:: - - ping - -3. ECM subset function -====================== - -The function is provided by usb_f_ecm_subset.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "geth". -The ECM subset function provides these attributes in its function directory: - - =============== ================================================== - ifname network device interface name associated with this - function instance - qmult queue length multiplier for high and super speed - host_addr MAC address of host's end of this - Ethernet over USB link - dev_addr MAC address of device's end of this - Ethernet over USB link - =============== ================================================== - -and after creating the functions/ecm. they contain default -values: qmult is 5, dev_addr and host_addr are randomly selected. -Except for ifname they can be written to until the function is linked to a -configuration. The ifname is read-only and contains the name of the interface -which was assigned by the net core, e. g. usb0. - -Testing the ECM subset function -------------------------------- - -Configure IP addresses of the device and the host. Then: - -On the device:: - - ping - -On the host:: - - ping - -4. EEM function -=============== - -The function is provided by usb_f_eem.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "eem". -The EEM function provides these attributes in its function directory: - - =============== ================================================== - ifname network device interface name associated with this - function instance - qmult queue length multiplier for high and super speed - host_addr MAC address of host's end of this - Ethernet over USB link - dev_addr MAC address of device's end of this - Ethernet over USB link - =============== ================================================== - -and after creating the functions/eem. they contain default -values: qmult is 5, dev_addr and host_addr are randomly selected. -Except for ifname they can be written to until the function is linked to a -configuration. The ifname is read-only and contains the name of the interface -which was assigned by the net core, e. g. usb0. - -Testing the EEM function ------------------------- - -Configure IP addresses of the device and the host. Then: - -On the device:: - - ping - -On the host:: - - ping - -5. FFS function -=============== - -The function is provided by usb_f_fs.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "ffs". -The function directory is intentionally empty and not modifiable. - -After creating the directory there is a new instance (a "device") of FunctionFS -available in the system. Once a "device" is available, the user should follow -the standard procedure for using FunctionFS (mount it, run the userspace -process which implements the function proper). The gadget should be enabled -by writing a suitable string to usb_gadget//UDC. - -Testing the FFS function ------------------------- - -On the device: start the function's userspace daemon, enable the gadget - -On the host: use the USB function provided by the device - -6. HID function -=============== - -The function is provided by usb_f_hid.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "hid". -The HID function provides these attributes in its function directory: - - =============== =========================================== - protocol HID protocol to use - report_desc data to be used in HID reports, except data - passed with /dev/hidg - report_length HID report length - subclass HID subclass to use - =============== =========================================== - -For a keyboard the protocol and the subclass are 1, the report_length is 8, -while the report_desc is:: - - $ hd my_report_desc - 00000000 05 01 09 06 a1 01 05 07 19 e0 29 e7 15 00 25 01 |..........)...%.| - 00000010 75 01 95 08 81 02 95 01 75 08 81 03 95 05 75 01 |u.......u.....u.| - 00000020 05 08 19 01 29 05 91 02 95 01 75 03 91 03 95 06 |....).....u.....| - 00000030 75 08 15 00 25 65 05 07 19 00 29 65 81 00 c0 |u...%e....)e...| - 0000003f - -Such a sequence of bytes can be stored to the attribute with echo:: - - $ echo -ne \\x05\\x01\\x09\\x06\\xa1..... - -Testing the HID function ------------------------- - -Device: - -- create the gadget -- connect the gadget to a host, preferably not the one used - to control the gadget -- run a program which writes to /dev/hidg, e.g. - a userspace program found in Documentation/usb/gadget_hid.txt:: - - $ ./hid_gadget_test /dev/hidg0 keyboard - -Host: - -- observe the keystrokes from the gadget - -7. LOOPBACK function -==================== - -The function is provided by usb_f_ss_lb.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "Loopback". -The LOOPBACK function provides these attributes in its function directory: - - =============== ======================= - qlen depth of loopback queue - bulk_buflen buffer length - =============== ======================= - -Testing the LOOPBACK function ------------------------------ - -device: run the gadget - -host: test-usb (tools/usb/testusb.c) - -8. MASS STORAGE function -======================== - -The function is provided by usb_f_mass_storage.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "mass_storage". -The MASS STORAGE function provides these attributes in its directory: -files: - - =============== ============================================== - stall Set to permit function to halt bulk endpoints. - Disabled on some USB devices known not to work - correctly. You should set it to true. - num_buffers Number of pipeline buffers. Valid numbers - are 2..4. Available only if - CONFIG_USB_GADGET_DEBUG_FILES is set. - =============== ============================================== - -and a default lun.0 directory corresponding to SCSI LUN #0. - -A new lun can be added with mkdir:: - - $ mkdir functions/mass_storage.0/partition.5 - -Lun numbering does not have to be continuous, except for lun #0 which is -created by default. A maximum of 8 luns can be specified and they all must be -named following the . scheme. The numbers can be 0..8. -Probably a good convention is to name the luns "lun.", -although it is not mandatory. - -In each lun directory there are the following attribute files: - - =============== ============================================== - file The path to the backing file for the LUN. - Required if LUN is not marked as removable. - ro Flag specifying access to the LUN shall be - read-only. This is implied if CD-ROM emulation - is enabled as well as when it was impossible - to open "filename" in R/W mode. - removable Flag specifying that LUN shall be indicated as - being removable. - cdrom Flag specifying that LUN shall be reported as - being a CD-ROM. - nofua Flag specifying that FUA flag - in SCSI WRITE(10,12) - =============== ============================================== - -Testing the MASS STORAGE function ---------------------------------- - -device: connect the gadget, enable it -host: dmesg, see the USB drives appear (if system configured to automatically -mount) - -9. MIDI function -================ - -The function is provided by usb_f_midi.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "midi". -The MIDI function provides these attributes in its function directory: - - =============== ==================================== - buflen MIDI buffer length - id ID string for the USB MIDI adapter - in_ports number of MIDI input ports - index index value for the USB MIDI adapter - out_ports number of MIDI output ports - qlen USB read request queue length - =============== ==================================== - -Testing the MIDI function -------------------------- - -There are two cases: playing a mid from the gadget to -the host and playing a mid from the host to the gadget. - -1) Playing a mid from the gadget to the host: - -host:: - - $ arecordmidi -l - Port Client name Port name - 14:0 Midi Through Midi Through Port-0 - 24:0 MIDI Gadget MIDI Gadget MIDI 1 - $ arecordmidi -p 24:0 from_gadget.mid - -gadget:: - - $ aplaymidi -l - Port Client name Port name - 20:0 f_midi f_midi - - $ aplaymidi -p 20:0 to_host.mid - -2) Playing a mid from the host to the gadget - -gadget:: - - $ arecordmidi -l - Port Client name Port name - 20:0 f_midi f_midi - - $ arecordmidi -p 20:0 from_host.mid - -host:: - - $ aplaymidi -l - Port Client name Port name - 14:0 Midi Through Midi Through Port-0 - 24:0 MIDI Gadget MIDI Gadget MIDI 1 - - $ aplaymidi -p24:0 to_gadget.mid - -The from_gadget.mid should sound identical to the to_host.mid. - -The from_host.id should sound identical to the to_gadget.mid. - -MIDI files can be played to speakers/headphones with e.g. timidity installed:: - - $ aplaymidi -l - Port Client name Port name - 14:0 Midi Through Midi Through Port-0 - 24:0 MIDI Gadget MIDI Gadget MIDI 1 - 128:0 TiMidity TiMidity port 0 - 128:1 TiMidity TiMidity port 1 - 128:2 TiMidity TiMidity port 2 - 128:3 TiMidity TiMidity port 3 - - $ aplaymidi -p 128:0 file.mid - -MIDI ports can be logically connected using the aconnect utility, e.g.:: - - $ aconnect 24:0 128:0 # try it on the host - -After the gadget's MIDI port is connected to timidity's MIDI port, -whatever is played at the gadget side with aplaymidi -l is audible -in host's speakers/headphones. - -10. NCM function -================ - -The function is provided by usb_f_ncm.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "ncm". -The NCM function provides these attributes in its function directory: - - =============== ================================================== - ifname network device interface name associated with this - function instance - qmult queue length multiplier for high and super speed - host_addr MAC address of host's end of this - Ethernet over USB link - dev_addr MAC address of device's end of this - Ethernet over USB link - =============== ================================================== - -and after creating the functions/ncm. they contain default -values: qmult is 5, dev_addr and host_addr are randomly selected. -Except for ifname they can be written to until the function is linked to a -configuration. The ifname is read-only and contains the name of the interface -which was assigned by the net core, e. g. usb0. - -Testing the NCM function ------------------------- - -Configure IP addresses of the device and the host. Then: - -On the device:: - - ping - -On the host:: - - ping - -11. OBEX function -================= - -The function is provided by usb_f_obex.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "obex". -The OBEX function provides just one attribute in its function directory: - - port_num - -The attribute is read-only. - -There can be at most 4 ACM/generic serial/OBEX ports in the system. - -Testing the OBEX function -------------------------- - -On device:: - - seriald -f /dev/ttyGS -s 1024 - -On host:: - - serialc -v -p -i -a1 -s1024 \ - -t -r - -where seriald and serialc are Felipe's utilities found here: - - https://github.com/felipebalbi/usb-tools.git master - -12. PHONET function -=================== - -The function is provided by usb_f_phonet.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "phonet". -The PHONET function provides just one attribute in its function directory: - - =============== ================================================== - ifname network device interface name associated with this - function instance - =============== ================================================== - -Testing the PHONET function ---------------------------- - -It is not possible to test the SOCK_STREAM protocol without a specific piece -of hardware, so only SOCK_DGRAM has been tested. For the latter to work, -in the past I had to apply the patch mentioned here: - -http://www.spinics.net/lists/linux-usb/msg85689.html - -These tools are required: - -git://git.gitorious.org/meego-cellular/phonet-utils.git - -On the host:: - - $ ./phonet -a 0x10 -i usbpn0 - $ ./pnroute add 0x6c usbpn0 - $./pnroute add 0x10 usbpn0 - $ ifconfig usbpn0 up - -On the device:: - - $ ./phonet -a 0x6c -i upnlink0 - $ ./pnroute add 0x10 upnlink0 - $ ifconfig upnlink0 up - -Then a test program can be used:: - - http://www.spinics.net/lists/linux-usb/msg85690.html - -On the device:: - - $ ./pnxmit -a 0x6c -r - -On the host:: - - $ ./pnxmit -a 0x10 -s 0x6c - -As a result some data should be sent from host to device. -Then the other way round: - -On the host:: - - $ ./pnxmit -a 0x10 -r - -On the device:: - - $ ./pnxmit -a 0x6c -s 0x10 - -13. RNDIS function -================== - -The function is provided by usb_f_rndis.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "rndis". -The RNDIS function provides these attributes in its function directory: - - =============== ================================================== - ifname network device interface name associated with this - function instance - qmult queue length multiplier for high and super speed - host_addr MAC address of host's end of this - Ethernet over USB link - dev_addr MAC address of device's end of this - Ethernet over USB link - =============== ================================================== - -and after creating the functions/rndis. they contain default -values: qmult is 5, dev_addr and host_addr are randomly selected. -Except for ifname they can be written to until the function is linked to a -configuration. The ifname is read-only and contains the name of the interface -which was assigned by the net core, e. g. usb0. - -Testing the RNDIS function --------------------------- - -Configure IP addresses of the device and the host. Then: - -On the device:: - - ping - -On the host:: - - ping - -14. SERIAL function -=================== - -The function is provided by usb_f_gser.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "gser". -The SERIAL function provides just one attribute in its function directory: - - port_num - -The attribute is read-only. - -There can be at most 4 ACM/generic serial/OBEX ports in the system. - -Testing the SERIAL function ---------------------------- - -On host:: - - insmod usbserial - echo VID PID >/sys/bus/usb-serial/drivers/generic/new_id - -On host:: - - cat > /dev/ttyUSB - -On target:: - - cat /dev/ttyGS - -then the other way round - -On target:: - - cat > /dev/ttyGS - -On host:: - - cat /dev/ttyUSB - -15. SOURCESINK function -======================= - -The function is provided by usb_f_ss_lb.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "SourceSink". -The SOURCESINK function provides these attributes in its function directory: - - =============== ================================== - pattern 0 (all zeros), 1 (mod63), 2 (none) - isoc_interval 1..16 - isoc_maxpacket 0 - 1023 (fs), 0 - 1024 (hs/ss) - isoc_mult 0..2 (hs/ss only) - isoc_maxburst 0..15 (ss only) - bulk_buflen buffer length - bulk_qlen depth of queue for bulk - iso_qlen depth of queue for iso - =============== ================================== - -Testing the SOURCESINK function -------------------------------- - -device: run the gadget - -host: test-usb (tools/usb/testusb.c) - - -16. UAC1 function (legacy implementation) -========================================= - -The function is provided by usb_f_uac1_legacy.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory -is "uac1_legacy". -The uac1 function provides these attributes in its function directory: - - =============== ==================================== - audio_buf_size audio buffer size - fn_cap capture pcm device file name - fn_cntl control device file name - fn_play playback pcm device file name - req_buf_size ISO OUT endpoint request buffer size - req_count ISO OUT endpoint request count - =============== ==================================== - -The attributes have sane default values. - -Testing the UAC1 function -------------------------- - -device: run the gadget - -host:: - - aplay -l # should list our USB Audio Gadget - -17. UAC2 function -================= - -The function is provided by usb_f_uac2.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "uac2". -The uac2 function provides these attributes in its function directory: - - =============== ==================================================== - c_chmask capture channel mask - c_srate capture sampling rate - c_ssize capture sample size (bytes) - p_chmask playback channel mask - p_srate playback sampling rate - p_ssize playback sample size (bytes) - req_number the number of pre-allocated request for both capture - and playback - =============== ==================================================== - -The attributes have sane default values. - -Testing the UAC2 function -------------------------- - -device: run the gadget -host: aplay -l # should list our USB Audio Gadget - -This function does not require real hardware support, it just -sends a stream of audio data to/from the host. In order to -actually hear something at the device side, a command similar -to this must be used at the device side:: - - $ arecord -f dat -t wav -D hw:2,0 | aplay -D hw:0,0 & - -e.g.:: - - $ arecord -f dat -t wav -D hw:CARD=UAC2Gadget,DEV=0 | \ - aplay -D default:CARD=OdroidU3 - -18. UVC function -================ - -The function is provided by usb_f_uvc.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "uvc". -The uvc function provides these attributes in its function directory: - - =================== ================================================ - streaming_interval interval for polling endpoint for data transfers - streaming_maxburst bMaxBurst for super speed companion descriptor - streaming_maxpacket maximum packet size this endpoint is capable of - sending or receiving when this configuration is - selected - =================== ================================================ - -There are also "control" and "streaming" subdirectories, each of which contain -a number of their subdirectories. There are some sane defaults provided, but -the user must provide the following: - - ================== ==================================================== - control header create in control/header, link from control/class/fs - and/or control/class/ss - streaming header create in streaming/header, link from - streaming/class/fs and/or streaming/class/hs and/or - streaming/class/ss - format description create in streaming/mjpeg and/or - streaming/uncompressed - frame description create in streaming/mjpeg/ and/or in - streaming/uncompressed/ - ================== ==================================================== - -Each frame description contains frame interval specification, and each -such specification consists of a number of lines with an inverval value -in each line. The rules stated above are best illustrated with an example:: - - # mkdir functions/uvc.usb0/control/header/h - # cd functions/uvc.usb0/control/ - # ln -s header/h class/fs - # ln -s header/h class/ss - # mkdir -p functions/uvc.usb0/streaming/uncompressed/u/360p - # cat < functions/uvc.usb0/streaming/uncompressed/u/360p/dwFrameInterval - 666666 - 1000000 - 5000000 - EOF - # cd $GADGET_CONFIGFS_ROOT - # mkdir functions/uvc.usb0/streaming/header/h - # cd functions/uvc.usb0/streaming/header/h - # ln -s ../../uncompressed/u - # cd ../../class/fs - # ln -s ../../header/h - # cd ../../class/hs - # ln -s ../../header/h - # cd ../../class/ss - # ln -s ../../header/h - - -Testing the UVC function ------------------------- - -device: run the gadget, modprobe vivid:: - - # uvc-gadget -u /dev/video -v /dev/video - -where uvc-gadget is this program: - http://git.ideasonboard.org/uvc-gadget.git - -with these patches: - - http://www.spinics.net/lists/linux-usb/msg99220.html - -host:: - - luvcview -f yuv - -19. PRINTER function -==================== - -The function is provided by usb_f_printer.ko module. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "printer". -The printer function provides these attributes in its function directory: - - ========== =========================================== - pnp_string Data to be passed to the host in pnp string - q_len Number of requests per endpoint - ========== =========================================== - -Testing the PRINTER function ----------------------------- - -The most basic testing: - -device: run the gadget:: - - # ls -l /devices/virtual/usb_printer_gadget/ - -should show g_printer. - -If udev is active, then /dev/g_printer should appear automatically. - -host: - -If udev is active, then e.g. /dev/usb/lp0 should appear. - -host->device transmission: - -device:: - - # cat /dev/g_printer - -host:: - - # cat > /dev/usb/lp0 - -device->host transmission:: - - # cat > /dev/g_printer - -host:: - - # cat /dev/usb/lp0 - -More advanced testing can be done with the prn_example -described in Documentation/usb/gadget_printer.txt. - - -20. UAC1 function (virtual ALSA card, using u_audio API) -======================================================== - -The function is provided by usb_f_uac1.ko module. -It will create a virtual ALSA card and the audio streams are simply -sinked to and sourced from it. - -Function-specific configfs interface ------------------------------------- - -The function name to use when creating the function directory is "uac1". -The uac1 function provides these attributes in its function directory: - - ========== ==================================================== - c_chmask capture channel mask - c_srate capture sampling rate - c_ssize capture sample size (bytes) - p_chmask playback channel mask - p_srate playback sampling rate - p_ssize playback sample size (bytes) - req_number the number of pre-allocated request for both capture - and playback - ========== ==================================================== - -The attributes have sane default values. - -Testing the UAC1 function -------------------------- - -device: run the gadget -host: aplay -l # should list our USB Audio Gadget - -This function does not require real hardware support, it just -sends a stream of audio data to/from the host. In order to -actually hear something at the device side, a command similar -to this must be used at the device side:: - - $ arecord -f dat -t wav -D hw:2,0 | aplay -D hw:0,0 & - -e.g.:: - - $ arecord -f dat -t wav -D hw:CARD=UAC1Gadget,DEV=0 | \ - aplay -D default:CARD=OdroidU3 diff --git a/Documentation/usb/gadget_configfs.rst b/Documentation/usb/gadget_configfs.rst new file mode 100644 index 000000000000..54fb08baae22 --- /dev/null +++ b/Documentation/usb/gadget_configfs.rst @@ -0,0 +1,390 @@ +============================================ +Linux USB gadget configured through configfs +============================================ + + +25th April 2013 + + + + +Overview +======== + +A USB Linux Gadget is a device which has a UDC (USB Device Controller) and can +be connected to a USB Host to extend it with additional functions like a serial +port or a mass storage capability. + +A gadget is seen by its host as a set of configurations, each of which contains +a number of interfaces which, from the gadget's perspective, are known as +functions, each function representing e.g. a serial connection or a SCSI disk. + +Linux provides a number of functions for gadgets to use. + +Creating a gadget means deciding what configurations there will be +and which functions each configuration will provide. + +Configfs (please see `Documentation/filesystems/configfs/*`) lends itself nicely +for the purpose of telling the kernel about the above mentioned decision. +This document is about how to do it. + +It also describes how configfs integration into gadget is designed. + + + + +Requirements +============ + +In order for this to work configfs must be available, so CONFIGFS_FS must be +'y' or 'm' in .config. As of this writing USB_LIBCOMPOSITE selects CONFIGFS_FS. + + + + +Usage +===== + +(The original post describing the first function +made available through configfs can be seen here: +http://www.spinics.net/lists/linux-usb/msg76388.html) + +:: + + $ modprobe libcomposite + $ mount none $CONFIGFS_HOME -t configfs + +where CONFIGFS_HOME is the mount point for configfs + +1. Creating the gadgets +----------------------- + +For each gadget to be created its corresponding directory must be created:: + + $ mkdir $CONFIGFS_HOME/usb_gadget/ + +e.g.:: + + $ mkdir $CONFIGFS_HOME/usb_gadget/g1 + + ... + ... + ... + + $ cd $CONFIGFS_HOME/usb_gadget/g1 + +Each gadget needs to have its vendor id and product id specified:: + + $ echo > idVendor + $ echo > idProduct + +A gadget also needs its serial number, manufacturer and product strings. +In order to have a place to store them, a strings subdirectory must be created +for each language, e.g.:: + + $ mkdir strings/0x409 + +Then the strings can be specified:: + + $ echo > strings/0x409/serialnumber + $ echo > strings/0x409/manufacturer + $ echo > strings/0x409/product + +2. Creating the configurations +------------------------------ + +Each gadget will consist of a number of configurations, their corresponding +directories must be created: + +$ mkdir configs/. + +where can be any string which is legal in a filesystem and the + is the configuration's number, e.g.:: + + $ mkdir configs/c.1 + + ... + ... + ... + +Each configuration also needs its strings, so a subdirectory must be created +for each language, e.g.:: + + $ mkdir configs/c.1/strings/0x409 + +Then the configuration string can be specified:: + + $ echo > configs/c.1/strings/0x409/configuration + +Some attributes can also be set for a configuration, e.g.:: + + $ echo 120 > configs/c.1/MaxPower + +3. Creating the functions +------------------------- + +The gadget will provide some functions, for each function its corresponding +directory must be created:: + + $ mkdir functions/. + +where corresponds to one of allowed function names and instance name +is an arbitrary string allowed in a filesystem, e.g.:: + + $ mkdir functions/ncm.usb0 # usb_f_ncm.ko gets loaded with request_module() + + ... + ... + ... + +Each function provides its specific set of attributes, with either read-only +or read-write access. Where applicable they need to be written to as +appropriate. +Please refer to Documentation/ABI/*/configfs-usb-gadget* for more information. + +4. Associating the functions with their configurations +------------------------------------------------------ + +At this moment a number of gadgets is created, each of which has a number of +configurations specified and a number of functions available. What remains +is specifying which function is available in which configuration (the same +function can be used in multiple configurations). This is achieved with +creating symbolic links:: + + $ ln -s functions/. configs/. + +e.g.:: + + $ ln -s functions/ncm.usb0 configs/c.1 + + ... + ... + ... + +5. Enabling the gadget +---------------------- + +All the above steps serve the purpose of composing the gadget of +configurations and functions. + +An example directory structure might look like this:: + + . + ./strings + ./strings/0x409 + ./strings/0x409/serialnumber + ./strings/0x409/product + ./strings/0x409/manufacturer + ./configs + ./configs/c.1 + ./configs/c.1/ncm.usb0 -> ../../../../usb_gadget/g1/functions/ncm.usb0 + ./configs/c.1/strings + ./configs/c.1/strings/0x409 + ./configs/c.1/strings/0x409/configuration + ./configs/c.1/bmAttributes + ./configs/c.1/MaxPower + ./functions + ./functions/ncm.usb0 + ./functions/ncm.usb0/ifname + ./functions/ncm.usb0/qmult + ./functions/ncm.usb0/host_addr + ./functions/ncm.usb0/dev_addr + ./UDC + ./bcdUSB + ./bcdDevice + ./idProduct + ./idVendor + ./bMaxPacketSize0 + ./bDeviceProtocol + ./bDeviceSubClass + ./bDeviceClass + + +Such a gadget must be finally enabled so that the USB host can enumerate it. + +In order to enable the gadget it must be bound to a UDC (USB Device +Controller):: + + $ echo > UDC + +where is one of those found in /sys/class/udc/* +e.g.:: + + $ echo s3c-hsotg > UDC + + +6. Disabling the gadget +----------------------- + +:: + + $ echo "" > UDC + +7. Cleaning up +-------------- + +Remove functions from configurations:: + + $ rm configs/./ + +where . specify the configuration and is +a symlink to a function being removed from the configuration, e.g.:: + + $ rm configs/c.1/ncm.usb0 + + ... + ... + ... + +Remove strings directories in configurations: + + $ rmdir configs/./strings/ + +e.g.:: + + $ rmdir configs/c.1/strings/0x409 + + ... + ... + ... + +and remove the configurations:: + + $ rmdir configs/. + +e.g.:: + + rmdir configs/c.1 + + ... + ... + ... + +Remove functions (function modules are not unloaded, though): + + $ rmdir functions/. + +e.g.:: + + $ rmdir functions/ncm.usb0 + + ... + ... + ... + +Remove strings directories in the gadget:: + + $ rmdir strings/ + +e.g.:: + + $ rmdir strings/0x409 + +and finally remove the gadget:: + + $ cd .. + $ rmdir + +e.g.:: + + $ rmdir g1 + + + + +Implementation design +===================== + +Below the idea of how configfs works is presented. +In configfs there are items and groups, both represented as directories. +The difference between an item and a group is that a group can contain +other groups. In the picture below only an item is shown. +Both items and groups can have attributes, which are represented as files. +The user can create and remove directories, but cannot remove files, +which can be read-only or read-write, depending on what they represent. + +The filesystem part of configfs operates on config_items/groups and +configfs_attributes which are generic and of the same type for all +configured elements. However, they are embedded in usage-specific +larger structures. In the picture below there is a "cs" which contains +a config_item and an "sa" which contains a configfs_attribute. + +The filesystem view would be like this:: + + ./ + ./cs (directory) + | + +--sa (file) + | + . + . + . + +Whenever a user reads/writes the "sa" file, a function is called +which accepts a struct config_item and a struct configfs_attribute. +In the said function the "cs" and "sa" are retrieved using the well +known container_of technique and an appropriate sa's function (show or +store) is called and passed the "cs" and a character buffer. The "show" +is for displaying the file's contents (copy data from the cs to the +buffer), while the "store" is for modifying the file's contents (copy data +from the buffer to the cs), but it is up to the implementer of the +two functions to decide what they actually do. + +:: + + typedef struct configured_structure cs; + typedef struct specific_attribute sa; + + sa + +----------------------------------+ + cs | (*show)(cs *, buffer); | + +-----------------+ | (*store)(cs *, buffer, length); | + | | | | + | +-------------+ | | +------------------+ | + | | struct |-|----|------>|struct | | + | | config_item | | | |configfs_attribute| | + | +-------------+ | | +------------------+ | + | | +----------------------------------+ + | data to be set | . + | | . + +-----------------+ . + +The file names are decided by the config item/group designer, while +the directories in general can be named at will. A group can have +a number of its default sub-groups created automatically. + +For more information on configfs please see +`Documentation/filesystems/configfs/*`. + +The concepts described above translate to USB gadgets like this: + +1. A gadget has its config group, which has some attributes (idVendor, +idProduct etc) and default sub-groups (configs, functions, strings). +Writing to the attributes causes the information to be stored in +appropriate locations. In the configs, functions and strings sub-groups +a user can create their sub-groups to represent configurations, functions, +and groups of strings in a given language. + +2. The user creates configurations and functions, in the configurations +creates symbolic links to functions. This information is used when the +gadget's UDC attribute is written to, which means binding the gadget +to the UDC. The code in drivers/usb/gadget/configfs.c iterates over +all configurations, and in each configuration it iterates over all +functions and binds them. This way the whole gadget is bound. + +3. The file drivers/usb/gadget/configfs.c contains code for + + - gadget's config_group + - gadget's default groups (configs, functions, strings) + - associating functions with configurations (symlinks) + +4. Each USB function naturally has its own view of what it wants +configured, so config_groups for particular functions are defined +in the functions implementation files drivers/usb/gadget/f_*.c. + +5. Function's code is written in such a way that it uses + +usb_get_function_instance(), which, in turn, calls request_module. +So, provided that modprobe works, modules for particular functions +are loaded automatically. Please note that the converse is not true: +after a gadget is disabled and torn down, the modules remain loaded. diff --git a/Documentation/usb/gadget_configfs.txt b/Documentation/usb/gadget_configfs.txt deleted file mode 100644 index 54fb08baae22..000000000000 --- a/Documentation/usb/gadget_configfs.txt +++ /dev/null @@ -1,390 +0,0 @@ -============================================ -Linux USB gadget configured through configfs -============================================ - - -25th April 2013 - - - - -Overview -======== - -A USB Linux Gadget is a device which has a UDC (USB Device Controller) and can -be connected to a USB Host to extend it with additional functions like a serial -port or a mass storage capability. - -A gadget is seen by its host as a set of configurations, each of which contains -a number of interfaces which, from the gadget's perspective, are known as -functions, each function representing e.g. a serial connection or a SCSI disk. - -Linux provides a number of functions for gadgets to use. - -Creating a gadget means deciding what configurations there will be -and which functions each configuration will provide. - -Configfs (please see `Documentation/filesystems/configfs/*`) lends itself nicely -for the purpose of telling the kernel about the above mentioned decision. -This document is about how to do it. - -It also describes how configfs integration into gadget is designed. - - - - -Requirements -============ - -In order for this to work configfs must be available, so CONFIGFS_FS must be -'y' or 'm' in .config. As of this writing USB_LIBCOMPOSITE selects CONFIGFS_FS. - - - - -Usage -===== - -(The original post describing the first function -made available through configfs can be seen here: -http://www.spinics.net/lists/linux-usb/msg76388.html) - -:: - - $ modprobe libcomposite - $ mount none $CONFIGFS_HOME -t configfs - -where CONFIGFS_HOME is the mount point for configfs - -1. Creating the gadgets ------------------------ - -For each gadget to be created its corresponding directory must be created:: - - $ mkdir $CONFIGFS_HOME/usb_gadget/ - -e.g.:: - - $ mkdir $CONFIGFS_HOME/usb_gadget/g1 - - ... - ... - ... - - $ cd $CONFIGFS_HOME/usb_gadget/g1 - -Each gadget needs to have its vendor id and product id specified:: - - $ echo > idVendor - $ echo > idProduct - -A gadget also needs its serial number, manufacturer and product strings. -In order to have a place to store them, a strings subdirectory must be created -for each language, e.g.:: - - $ mkdir strings/0x409 - -Then the strings can be specified:: - - $ echo > strings/0x409/serialnumber - $ echo > strings/0x409/manufacturer - $ echo > strings/0x409/product - -2. Creating the configurations ------------------------------- - -Each gadget will consist of a number of configurations, their corresponding -directories must be created: - -$ mkdir configs/. - -where can be any string which is legal in a filesystem and the - is the configuration's number, e.g.:: - - $ mkdir configs/c.1 - - ... - ... - ... - -Each configuration also needs its strings, so a subdirectory must be created -for each language, e.g.:: - - $ mkdir configs/c.1/strings/0x409 - -Then the configuration string can be specified:: - - $ echo > configs/c.1/strings/0x409/configuration - -Some attributes can also be set for a configuration, e.g.:: - - $ echo 120 > configs/c.1/MaxPower - -3. Creating the functions -------------------------- - -The gadget will provide some functions, for each function its corresponding -directory must be created:: - - $ mkdir functions/. - -where corresponds to one of allowed function names and instance name -is an arbitrary string allowed in a filesystem, e.g.:: - - $ mkdir functions/ncm.usb0 # usb_f_ncm.ko gets loaded with request_module() - - ... - ... - ... - -Each function provides its specific set of attributes, with either read-only -or read-write access. Where applicable they need to be written to as -appropriate. -Please refer to Documentation/ABI/*/configfs-usb-gadget* for more information. - -4. Associating the functions with their configurations ------------------------------------------------------- - -At this moment a number of gadgets is created, each of which has a number of -configurations specified and a number of functions available. What remains -is specifying which function is available in which configuration (the same -function can be used in multiple configurations). This is achieved with -creating symbolic links:: - - $ ln -s functions/. configs/. - -e.g.:: - - $ ln -s functions/ncm.usb0 configs/c.1 - - ... - ... - ... - -5. Enabling the gadget ----------------------- - -All the above steps serve the purpose of composing the gadget of -configurations and functions. - -An example directory structure might look like this:: - - . - ./strings - ./strings/0x409 - ./strings/0x409/serialnumber - ./strings/0x409/product - ./strings/0x409/manufacturer - ./configs - ./configs/c.1 - ./configs/c.1/ncm.usb0 -> ../../../../usb_gadget/g1/functions/ncm.usb0 - ./configs/c.1/strings - ./configs/c.1/strings/0x409 - ./configs/c.1/strings/0x409/configuration - ./configs/c.1/bmAttributes - ./configs/c.1/MaxPower - ./functions - ./functions/ncm.usb0 - ./functions/ncm.usb0/ifname - ./functions/ncm.usb0/qmult - ./functions/ncm.usb0/host_addr - ./functions/ncm.usb0/dev_addr - ./UDC - ./bcdUSB - ./bcdDevice - ./idProduct - ./idVendor - ./bMaxPacketSize0 - ./bDeviceProtocol - ./bDeviceSubClass - ./bDeviceClass - - -Such a gadget must be finally enabled so that the USB host can enumerate it. - -In order to enable the gadget it must be bound to a UDC (USB Device -Controller):: - - $ echo > UDC - -where is one of those found in /sys/class/udc/* -e.g.:: - - $ echo s3c-hsotg > UDC - - -6. Disabling the gadget ------------------------ - -:: - - $ echo "" > UDC - -7. Cleaning up --------------- - -Remove functions from configurations:: - - $ rm configs/./ - -where . specify the configuration and is -a symlink to a function being removed from the configuration, e.g.:: - - $ rm configs/c.1/ncm.usb0 - - ... - ... - ... - -Remove strings directories in configurations: - - $ rmdir configs/./strings/ - -e.g.:: - - $ rmdir configs/c.1/strings/0x409 - - ... - ... - ... - -and remove the configurations:: - - $ rmdir configs/. - -e.g.:: - - rmdir configs/c.1 - - ... - ... - ... - -Remove functions (function modules are not unloaded, though): - - $ rmdir functions/. - -e.g.:: - - $ rmdir functions/ncm.usb0 - - ... - ... - ... - -Remove strings directories in the gadget:: - - $ rmdir strings/ - -e.g.:: - - $ rmdir strings/0x409 - -and finally remove the gadget:: - - $ cd .. - $ rmdir - -e.g.:: - - $ rmdir g1 - - - - -Implementation design -===================== - -Below the idea of how configfs works is presented. -In configfs there are items and groups, both represented as directories. -The difference between an item and a group is that a group can contain -other groups. In the picture below only an item is shown. -Both items and groups can have attributes, which are represented as files. -The user can create and remove directories, but cannot remove files, -which can be read-only or read-write, depending on what they represent. - -The filesystem part of configfs operates on config_items/groups and -configfs_attributes which are generic and of the same type for all -configured elements. However, they are embedded in usage-specific -larger structures. In the picture below there is a "cs" which contains -a config_item and an "sa" which contains a configfs_attribute. - -The filesystem view would be like this:: - - ./ - ./cs (directory) - | - +--sa (file) - | - . - . - . - -Whenever a user reads/writes the "sa" file, a function is called -which accepts a struct config_item and a struct configfs_attribute. -In the said function the "cs" and "sa" are retrieved using the well -known container_of technique and an appropriate sa's function (show or -store) is called and passed the "cs" and a character buffer. The "show" -is for displaying the file's contents (copy data from the cs to the -buffer), while the "store" is for modifying the file's contents (copy data -from the buffer to the cs), but it is up to the implementer of the -two functions to decide what they actually do. - -:: - - typedef struct configured_structure cs; - typedef struct specific_attribute sa; - - sa - +----------------------------------+ - cs | (*show)(cs *, buffer); | - +-----------------+ | (*store)(cs *, buffer, length); | - | | | | - | +-------------+ | | +------------------+ | - | | struct |-|----|------>|struct | | - | | config_item | | | |configfs_attribute| | - | +-------------+ | | +------------------+ | - | | +----------------------------------+ - | data to be set | . - | | . - +-----------------+ . - -The file names are decided by the config item/group designer, while -the directories in general can be named at will. A group can have -a number of its default sub-groups created automatically. - -For more information on configfs please see -`Documentation/filesystems/configfs/*`. - -The concepts described above translate to USB gadgets like this: - -1. A gadget has its config group, which has some attributes (idVendor, -idProduct etc) and default sub-groups (configs, functions, strings). -Writing to the attributes causes the information to be stored in -appropriate locations. In the configs, functions and strings sub-groups -a user can create their sub-groups to represent configurations, functions, -and groups of strings in a given language. - -2. The user creates configurations and functions, in the configurations -creates symbolic links to functions. This information is used when the -gadget's UDC attribute is written to, which means binding the gadget -to the UDC. The code in drivers/usb/gadget/configfs.c iterates over -all configurations, and in each configuration it iterates over all -functions and binds them. This way the whole gadget is bound. - -3. The file drivers/usb/gadget/configfs.c contains code for - - - gadget's config_group - - gadget's default groups (configs, functions, strings) - - associating functions with configurations (symlinks) - -4. Each USB function naturally has its own view of what it wants -configured, so config_groups for particular functions are defined -in the functions implementation files drivers/usb/gadget/f_*.c. - -5. Function's code is written in such a way that it uses - -usb_get_function_instance(), which, in turn, calls request_module. -So, provided that modprobe works, modules for particular functions -are loaded automatically. Please note that the converse is not true: -after a gadget is disabled and torn down, the modules remain loaded. diff --git a/Documentation/usb/gadget_hid.rst b/Documentation/usb/gadget_hid.rst new file mode 100644 index 000000000000..098d563040cc --- /dev/null +++ b/Documentation/usb/gadget_hid.rst @@ -0,0 +1,457 @@ +=========================== +Linux USB HID gadget driver +=========================== + +Introduction +============ + +The HID Gadget driver provides emulation of USB Human Interface +Devices (HID). The basic HID handling is done in the kernel, +and HID reports can be sent/received through I/O on the +/dev/hidgX character devices. + +For more details about HID, see the developer page on +http://www.usb.org/developers/hidpage/ + +Configuration +============= + +g_hid is a platform driver, so to use it you need to add +struct platform_device(s) to your platform code defining the +HID function descriptors you want to use - E.G. something +like:: + + #include + #include + + /* hid descriptor for a keyboard */ + static struct hidg_func_descriptor my_hid_data = { + .subclass = 0, /* No subclass */ + .protocol = 1, /* Keyboard */ + .report_length = 8, + .report_desc_length = 63, + .report_desc = { + 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */ + 0x09, 0x06, /* USAGE (Keyboard) */ + 0xa1, 0x01, /* COLLECTION (Application) */ + 0x05, 0x07, /* USAGE_PAGE (Keyboard) */ + 0x19, 0xe0, /* USAGE_MINIMUM (Keyboard LeftControl) */ + 0x29, 0xe7, /* USAGE_MAXIMUM (Keyboard Right GUI) */ + 0x15, 0x00, /* LOGICAL_MINIMUM (0) */ + 0x25, 0x01, /* LOGICAL_MAXIMUM (1) */ + 0x75, 0x01, /* REPORT_SIZE (1) */ + 0x95, 0x08, /* REPORT_COUNT (8) */ + 0x81, 0x02, /* INPUT (Data,Var,Abs) */ + 0x95, 0x01, /* REPORT_COUNT (1) */ + 0x75, 0x08, /* REPORT_SIZE (8) */ + 0x81, 0x03, /* INPUT (Cnst,Var,Abs) */ + 0x95, 0x05, /* REPORT_COUNT (5) */ + 0x75, 0x01, /* REPORT_SIZE (1) */ + 0x05, 0x08, /* USAGE_PAGE (LEDs) */ + 0x19, 0x01, /* USAGE_MINIMUM (Num Lock) */ + 0x29, 0x05, /* USAGE_MAXIMUM (Kana) */ + 0x91, 0x02, /* OUTPUT (Data,Var,Abs) */ + 0x95, 0x01, /* REPORT_COUNT (1) */ + 0x75, 0x03, /* REPORT_SIZE (3) */ + 0x91, 0x03, /* OUTPUT (Cnst,Var,Abs) */ + 0x95, 0x06, /* REPORT_COUNT (6) */ + 0x75, 0x08, /* REPORT_SIZE (8) */ + 0x15, 0x00, /* LOGICAL_MINIMUM (0) */ + 0x25, 0x65, /* LOGICAL_MAXIMUM (101) */ + 0x05, 0x07, /* USAGE_PAGE (Keyboard) */ + 0x19, 0x00, /* USAGE_MINIMUM (Reserved) */ + 0x29, 0x65, /* USAGE_MAXIMUM (Keyboard Application) */ + 0x81, 0x00, /* INPUT (Data,Ary,Abs) */ + 0xc0 /* END_COLLECTION */ + } + }; + + static struct platform_device my_hid = { + .name = "hidg", + .id = 0, + .num_resources = 0, + .resource = 0, + .dev.platform_data = &my_hid_data, + }; + +You can add as many HID functions as you want, only limited by +the amount of interrupt endpoints your gadget driver supports. + +Configuration with configfs +=========================== + +Instead of adding fake platform devices and drivers in order to pass +some data to the kernel, if HID is a part of a gadget composed with +configfs the hidg_func_descriptor.report_desc is passed to the kernel +by writing the appropriate stream of bytes to a configfs attribute. + +Send and receive HID reports +============================ + +HID reports can be sent/received using read/write on the +/dev/hidgX character devices. See below for an example program +to do this. + +hid_gadget_test is a small interactive program to test the HID +gadget driver. To use, point it at a hidg device and set the +device type (keyboard / mouse / joystick) - E.G.:: + + # hid_gadget_test /dev/hidg0 keyboard + +You are now in the prompt of hid_gadget_test. You can type any +combination of options and values. Available options and +values are listed at program start. In keyboard mode you can +send up to six values. + +For example type: g i s t r --left-shift + +Hit return and the corresponding report will be sent by the +HID gadget. + +Another interesting example is the caps lock test. Type +--caps-lock and hit return. A report is then sent by the +gadget and you should receive the host answer, corresponding +to the caps lock LED status:: + + --caps-lock + recv report:2 + +With this command:: + + # hid_gadget_test /dev/hidg1 mouse + +You can test the mouse emulation. Values are two signed numbers. + + +Sample code:: + + /* hid_gadget_test */ + + #include + #include + #include + #include + #include + #include + #include + #include + #include + + #define BUF_LEN 512 + + struct options { + const char *opt; + unsigned char val; + }; + + static struct options kmod[] = { + {.opt = "--left-ctrl", .val = 0x01}, + {.opt = "--right-ctrl", .val = 0x10}, + {.opt = "--left-shift", .val = 0x02}, + {.opt = "--right-shift", .val = 0x20}, + {.opt = "--left-alt", .val = 0x04}, + {.opt = "--right-alt", .val = 0x40}, + {.opt = "--left-meta", .val = 0x08}, + {.opt = "--right-meta", .val = 0x80}, + {.opt = NULL} + }; + + static struct options kval[] = { + {.opt = "--return", .val = 0x28}, + {.opt = "--esc", .val = 0x29}, + {.opt = "--bckspc", .val = 0x2a}, + {.opt = "--tab", .val = 0x2b}, + {.opt = "--spacebar", .val = 0x2c}, + {.opt = "--caps-lock", .val = 0x39}, + {.opt = "--f1", .val = 0x3a}, + {.opt = "--f2", .val = 0x3b}, + {.opt = "--f3", .val = 0x3c}, + {.opt = "--f4", .val = 0x3d}, + {.opt = "--f5", .val = 0x3e}, + {.opt = "--f6", .val = 0x3f}, + {.opt = "--f7", .val = 0x40}, + {.opt = "--f8", .val = 0x41}, + {.opt = "--f9", .val = 0x42}, + {.opt = "--f10", .val = 0x43}, + {.opt = "--f11", .val = 0x44}, + {.opt = "--f12", .val = 0x45}, + {.opt = "--insert", .val = 0x49}, + {.opt = "--home", .val = 0x4a}, + {.opt = "--pageup", .val = 0x4b}, + {.opt = "--del", .val = 0x4c}, + {.opt = "--end", .val = 0x4d}, + {.opt = "--pagedown", .val = 0x4e}, + {.opt = "--right", .val = 0x4f}, + {.opt = "--left", .val = 0x50}, + {.opt = "--down", .val = 0x51}, + {.opt = "--kp-enter", .val = 0x58}, + {.opt = "--up", .val = 0x52}, + {.opt = "--num-lock", .val = 0x53}, + {.opt = NULL} + }; + + int keyboard_fill_report(char report[8], char buf[BUF_LEN], int *hold) + { + char *tok = strtok(buf, " "); + int key = 0; + int i = 0; + + for (; tok != NULL; tok = strtok(NULL, " ")) { + + if (strcmp(tok, "--quit") == 0) + return -1; + + if (strcmp(tok, "--hold") == 0) { + *hold = 1; + continue; + } + + if (key < 6) { + for (i = 0; kval[i].opt != NULL; i++) + if (strcmp(tok, kval[i].opt) == 0) { + report[2 + key++] = kval[i].val; + break; + } + if (kval[i].opt != NULL) + continue; + } + + if (key < 6) + if (islower(tok[0])) { + report[2 + key++] = (tok[0] - ('a' - 0x04)); + continue; + } + + for (i = 0; kmod[i].opt != NULL; i++) + if (strcmp(tok, kmod[i].opt) == 0) { + report[0] = report[0] | kmod[i].val; + break; + } + if (kmod[i].opt != NULL) + continue; + + if (key < 6) + fprintf(stderr, "unknown option: %s\n", tok); + } + return 8; + } + + static struct options mmod[] = { + {.opt = "--b1", .val = 0x01}, + {.opt = "--b2", .val = 0x02}, + {.opt = "--b3", .val = 0x04}, + {.opt = NULL} + }; + + int mouse_fill_report(char report[8], char buf[BUF_LEN], int *hold) + { + char *tok = strtok(buf, " "); + int mvt = 0; + int i = 0; + for (; tok != NULL; tok = strtok(NULL, " ")) { + + if (strcmp(tok, "--quit") == 0) + return -1; + + if (strcmp(tok, "--hold") == 0) { + *hold = 1; + continue; + } + + for (i = 0; mmod[i].opt != NULL; i++) + if (strcmp(tok, mmod[i].opt) == 0) { + report[0] = report[0] | mmod[i].val; + break; + } + if (mmod[i].opt != NULL) + continue; + + if (!(tok[0] == '-' && tok[1] == '-') && mvt < 2) { + errno = 0; + report[1 + mvt++] = (char)strtol(tok, NULL, 0); + if (errno != 0) { + fprintf(stderr, "Bad value:'%s'\n", tok); + report[1 + mvt--] = 0; + } + continue; + } + + fprintf(stderr, "unknown option: %s\n", tok); + } + return 3; + } + + static struct options jmod[] = { + {.opt = "--b1", .val = 0x10}, + {.opt = "--b2", .val = 0x20}, + {.opt = "--b3", .val = 0x40}, + {.opt = "--b4", .val = 0x80}, + {.opt = "--hat1", .val = 0x00}, + {.opt = "--hat2", .val = 0x01}, + {.opt = "--hat3", .val = 0x02}, + {.opt = "--hat4", .val = 0x03}, + {.opt = "--hatneutral", .val = 0x04}, + {.opt = NULL} + }; + + int joystick_fill_report(char report[8], char buf[BUF_LEN], int *hold) + { + char *tok = strtok(buf, " "); + int mvt = 0; + int i = 0; + + *hold = 1; + + /* set default hat position: neutral */ + report[3] = 0x04; + + for (; tok != NULL; tok = strtok(NULL, " ")) { + + if (strcmp(tok, "--quit") == 0) + return -1; + + for (i = 0; jmod[i].opt != NULL; i++) + if (strcmp(tok, jmod[i].opt) == 0) { + report[3] = (report[3] & 0xF0) | jmod[i].val; + break; + } + if (jmod[i].opt != NULL) + continue; + + if (!(tok[0] == '-' && tok[1] == '-') && mvt < 3) { + errno = 0; + report[mvt++] = (char)strtol(tok, NULL, 0); + if (errno != 0) { + fprintf(stderr, "Bad value:'%s'\n", tok); + report[mvt--] = 0; + } + continue; + } + + fprintf(stderr, "unknown option: %s\n", tok); + } + return 4; + } + + void print_options(char c) + { + int i = 0; + + if (c == 'k') { + printf(" keyboard options:\n" + " --hold\n"); + for (i = 0; kmod[i].opt != NULL; i++) + printf("\t\t%s\n", kmod[i].opt); + printf("\n keyboard values:\n" + " [a-z] or\n"); + for (i = 0; kval[i].opt != NULL; i++) + printf("\t\t%-8s%s", kval[i].opt, i % 2 ? "\n" : ""); + printf("\n"); + } else if (c == 'm') { + printf(" mouse options:\n" + " --hold\n"); + for (i = 0; mmod[i].opt != NULL; i++) + printf("\t\t%s\n", mmod[i].opt); + printf("\n mouse values:\n" + " Two signed numbers\n" + "--quit to close\n"); + } else { + printf(" joystick options:\n"); + for (i = 0; jmod[i].opt != NULL; i++) + printf("\t\t%s\n", jmod[i].opt); + printf("\n joystick values:\n" + " three signed numbers\n" + "--quit to close\n"); + } + } + + int main(int argc, const char *argv[]) + { + const char *filename = NULL; + int fd = 0; + char buf[BUF_LEN]; + int cmd_len; + char report[8]; + int to_send = 8; + int hold = 0; + fd_set rfds; + int retval, i; + + if (argc < 3) { + fprintf(stderr, "Usage: %s devname mouse|keyboard|joystick\n", + argv[0]); + return 1; + } + + if (argv[2][0] != 'k' && argv[2][0] != 'm' && argv[2][0] != 'j') + return 2; + + filename = argv[1]; + + if ((fd = open(filename, O_RDWR, 0666)) == -1) { + perror(filename); + return 3; + } + + print_options(argv[2][0]); + + while (42) { + + FD_ZERO(&rfds); + FD_SET(STDIN_FILENO, &rfds); + FD_SET(fd, &rfds); + + retval = select(fd + 1, &rfds, NULL, NULL, NULL); + if (retval == -1 && errno == EINTR) + continue; + if (retval < 0) { + perror("select()"); + return 4; + } + + if (FD_ISSET(fd, &rfds)) { + cmd_len = read(fd, buf, BUF_LEN - 1); + printf("recv report:"); + for (i = 0; i < cmd_len; i++) + printf(" %02x", buf[i]); + printf("\n"); + } + + if (FD_ISSET(STDIN_FILENO, &rfds)) { + memset(report, 0x0, sizeof(report)); + cmd_len = read(STDIN_FILENO, buf, BUF_LEN - 1); + + if (cmd_len == 0) + break; + + buf[cmd_len - 1] = '\0'; + hold = 0; + + memset(report, 0x0, sizeof(report)); + if (argv[2][0] == 'k') + to_send = keyboard_fill_report(report, buf, &hold); + else if (argv[2][0] == 'm') + to_send = mouse_fill_report(report, buf, &hold); + else + to_send = joystick_fill_report(report, buf, &hold); + + if (to_send == -1) + break; + + if (write(fd, report, to_send) != to_send) { + perror(filename); + return 5; + } + if (!hold) { + memset(report, 0x0, sizeof(report)); + if (write(fd, report, to_send) != to_send) { + perror(filename); + return 6; + } + } + } + } + + close(fd); + return 0; + } diff --git a/Documentation/usb/gadget_hid.txt b/Documentation/usb/gadget_hid.txt deleted file mode 100644 index 098d563040cc..000000000000 --- a/Documentation/usb/gadget_hid.txt +++ /dev/null @@ -1,457 +0,0 @@ -=========================== -Linux USB HID gadget driver -=========================== - -Introduction -============ - -The HID Gadget driver provides emulation of USB Human Interface -Devices (HID). The basic HID handling is done in the kernel, -and HID reports can be sent/received through I/O on the -/dev/hidgX character devices. - -For more details about HID, see the developer page on -http://www.usb.org/developers/hidpage/ - -Configuration -============= - -g_hid is a platform driver, so to use it you need to add -struct platform_device(s) to your platform code defining the -HID function descriptors you want to use - E.G. something -like:: - - #include - #include - - /* hid descriptor for a keyboard */ - static struct hidg_func_descriptor my_hid_data = { - .subclass = 0, /* No subclass */ - .protocol = 1, /* Keyboard */ - .report_length = 8, - .report_desc_length = 63, - .report_desc = { - 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */ - 0x09, 0x06, /* USAGE (Keyboard) */ - 0xa1, 0x01, /* COLLECTION (Application) */ - 0x05, 0x07, /* USAGE_PAGE (Keyboard) */ - 0x19, 0xe0, /* USAGE_MINIMUM (Keyboard LeftControl) */ - 0x29, 0xe7, /* USAGE_MAXIMUM (Keyboard Right GUI) */ - 0x15, 0x00, /* LOGICAL_MINIMUM (0) */ - 0x25, 0x01, /* LOGICAL_MAXIMUM (1) */ - 0x75, 0x01, /* REPORT_SIZE (1) */ - 0x95, 0x08, /* REPORT_COUNT (8) */ - 0x81, 0x02, /* INPUT (Data,Var,Abs) */ - 0x95, 0x01, /* REPORT_COUNT (1) */ - 0x75, 0x08, /* REPORT_SIZE (8) */ - 0x81, 0x03, /* INPUT (Cnst,Var,Abs) */ - 0x95, 0x05, /* REPORT_COUNT (5) */ - 0x75, 0x01, /* REPORT_SIZE (1) */ - 0x05, 0x08, /* USAGE_PAGE (LEDs) */ - 0x19, 0x01, /* USAGE_MINIMUM (Num Lock) */ - 0x29, 0x05, /* USAGE_MAXIMUM (Kana) */ - 0x91, 0x02, /* OUTPUT (Data,Var,Abs) */ - 0x95, 0x01, /* REPORT_COUNT (1) */ - 0x75, 0x03, /* REPORT_SIZE (3) */ - 0x91, 0x03, /* OUTPUT (Cnst,Var,Abs) */ - 0x95, 0x06, /* REPORT_COUNT (6) */ - 0x75, 0x08, /* REPORT_SIZE (8) */ - 0x15, 0x00, /* LOGICAL_MINIMUM (0) */ - 0x25, 0x65, /* LOGICAL_MAXIMUM (101) */ - 0x05, 0x07, /* USAGE_PAGE (Keyboard) */ - 0x19, 0x00, /* USAGE_MINIMUM (Reserved) */ - 0x29, 0x65, /* USAGE_MAXIMUM (Keyboard Application) */ - 0x81, 0x00, /* INPUT (Data,Ary,Abs) */ - 0xc0 /* END_COLLECTION */ - } - }; - - static struct platform_device my_hid = { - .name = "hidg", - .id = 0, - .num_resources = 0, - .resource = 0, - .dev.platform_data = &my_hid_data, - }; - -You can add as many HID functions as you want, only limited by -the amount of interrupt endpoints your gadget driver supports. - -Configuration with configfs -=========================== - -Instead of adding fake platform devices and drivers in order to pass -some data to the kernel, if HID is a part of a gadget composed with -configfs the hidg_func_descriptor.report_desc is passed to the kernel -by writing the appropriate stream of bytes to a configfs attribute. - -Send and receive HID reports -============================ - -HID reports can be sent/received using read/write on the -/dev/hidgX character devices. See below for an example program -to do this. - -hid_gadget_test is a small interactive program to test the HID -gadget driver. To use, point it at a hidg device and set the -device type (keyboard / mouse / joystick) - E.G.:: - - # hid_gadget_test /dev/hidg0 keyboard - -You are now in the prompt of hid_gadget_test. You can type any -combination of options and values. Available options and -values are listed at program start. In keyboard mode you can -send up to six values. - -For example type: g i s t r --left-shift - -Hit return and the corresponding report will be sent by the -HID gadget. - -Another interesting example is the caps lock test. Type ---caps-lock and hit return. A report is then sent by the -gadget and you should receive the host answer, corresponding -to the caps lock LED status:: - - --caps-lock - recv report:2 - -With this command:: - - # hid_gadget_test /dev/hidg1 mouse - -You can test the mouse emulation. Values are two signed numbers. - - -Sample code:: - - /* hid_gadget_test */ - - #include - #include - #include - #include - #include - #include - #include - #include - #include - - #define BUF_LEN 512 - - struct options { - const char *opt; - unsigned char val; - }; - - static struct options kmod[] = { - {.opt = "--left-ctrl", .val = 0x01}, - {.opt = "--right-ctrl", .val = 0x10}, - {.opt = "--left-shift", .val = 0x02}, - {.opt = "--right-shift", .val = 0x20}, - {.opt = "--left-alt", .val = 0x04}, - {.opt = "--right-alt", .val = 0x40}, - {.opt = "--left-meta", .val = 0x08}, - {.opt = "--right-meta", .val = 0x80}, - {.opt = NULL} - }; - - static struct options kval[] = { - {.opt = "--return", .val = 0x28}, - {.opt = "--esc", .val = 0x29}, - {.opt = "--bckspc", .val = 0x2a}, - {.opt = "--tab", .val = 0x2b}, - {.opt = "--spacebar", .val = 0x2c}, - {.opt = "--caps-lock", .val = 0x39}, - {.opt = "--f1", .val = 0x3a}, - {.opt = "--f2", .val = 0x3b}, - {.opt = "--f3", .val = 0x3c}, - {.opt = "--f4", .val = 0x3d}, - {.opt = "--f5", .val = 0x3e}, - {.opt = "--f6", .val = 0x3f}, - {.opt = "--f7", .val = 0x40}, - {.opt = "--f8", .val = 0x41}, - {.opt = "--f9", .val = 0x42}, - {.opt = "--f10", .val = 0x43}, - {.opt = "--f11", .val = 0x44}, - {.opt = "--f12", .val = 0x45}, - {.opt = "--insert", .val = 0x49}, - {.opt = "--home", .val = 0x4a}, - {.opt = "--pageup", .val = 0x4b}, - {.opt = "--del", .val = 0x4c}, - {.opt = "--end", .val = 0x4d}, - {.opt = "--pagedown", .val = 0x4e}, - {.opt = "--right", .val = 0x4f}, - {.opt = "--left", .val = 0x50}, - {.opt = "--down", .val = 0x51}, - {.opt = "--kp-enter", .val = 0x58}, - {.opt = "--up", .val = 0x52}, - {.opt = "--num-lock", .val = 0x53}, - {.opt = NULL} - }; - - int keyboard_fill_report(char report[8], char buf[BUF_LEN], int *hold) - { - char *tok = strtok(buf, " "); - int key = 0; - int i = 0; - - for (; tok != NULL; tok = strtok(NULL, " ")) { - - if (strcmp(tok, "--quit") == 0) - return -1; - - if (strcmp(tok, "--hold") == 0) { - *hold = 1; - continue; - } - - if (key < 6) { - for (i = 0; kval[i].opt != NULL; i++) - if (strcmp(tok, kval[i].opt) == 0) { - report[2 + key++] = kval[i].val; - break; - } - if (kval[i].opt != NULL) - continue; - } - - if (key < 6) - if (islower(tok[0])) { - report[2 + key++] = (tok[0] - ('a' - 0x04)); - continue; - } - - for (i = 0; kmod[i].opt != NULL; i++) - if (strcmp(tok, kmod[i].opt) == 0) { - report[0] = report[0] | kmod[i].val; - break; - } - if (kmod[i].opt != NULL) - continue; - - if (key < 6) - fprintf(stderr, "unknown option: %s\n", tok); - } - return 8; - } - - static struct options mmod[] = { - {.opt = "--b1", .val = 0x01}, - {.opt = "--b2", .val = 0x02}, - {.opt = "--b3", .val = 0x04}, - {.opt = NULL} - }; - - int mouse_fill_report(char report[8], char buf[BUF_LEN], int *hold) - { - char *tok = strtok(buf, " "); - int mvt = 0; - int i = 0; - for (; tok != NULL; tok = strtok(NULL, " ")) { - - if (strcmp(tok, "--quit") == 0) - return -1; - - if (strcmp(tok, "--hold") == 0) { - *hold = 1; - continue; - } - - for (i = 0; mmod[i].opt != NULL; i++) - if (strcmp(tok, mmod[i].opt) == 0) { - report[0] = report[0] | mmod[i].val; - break; - } - if (mmod[i].opt != NULL) - continue; - - if (!(tok[0] == '-' && tok[1] == '-') && mvt < 2) { - errno = 0; - report[1 + mvt++] = (char)strtol(tok, NULL, 0); - if (errno != 0) { - fprintf(stderr, "Bad value:'%s'\n", tok); - report[1 + mvt--] = 0; - } - continue; - } - - fprintf(stderr, "unknown option: %s\n", tok); - } - return 3; - } - - static struct options jmod[] = { - {.opt = "--b1", .val = 0x10}, - {.opt = "--b2", .val = 0x20}, - {.opt = "--b3", .val = 0x40}, - {.opt = "--b4", .val = 0x80}, - {.opt = "--hat1", .val = 0x00}, - {.opt = "--hat2", .val = 0x01}, - {.opt = "--hat3", .val = 0x02}, - {.opt = "--hat4", .val = 0x03}, - {.opt = "--hatneutral", .val = 0x04}, - {.opt = NULL} - }; - - int joystick_fill_report(char report[8], char buf[BUF_LEN], int *hold) - { - char *tok = strtok(buf, " "); - int mvt = 0; - int i = 0; - - *hold = 1; - - /* set default hat position: neutral */ - report[3] = 0x04; - - for (; tok != NULL; tok = strtok(NULL, " ")) { - - if (strcmp(tok, "--quit") == 0) - return -1; - - for (i = 0; jmod[i].opt != NULL; i++) - if (strcmp(tok, jmod[i].opt) == 0) { - report[3] = (report[3] & 0xF0) | jmod[i].val; - break; - } - if (jmod[i].opt != NULL) - continue; - - if (!(tok[0] == '-' && tok[1] == '-') && mvt < 3) { - errno = 0; - report[mvt++] = (char)strtol(tok, NULL, 0); - if (errno != 0) { - fprintf(stderr, "Bad value:'%s'\n", tok); - report[mvt--] = 0; - } - continue; - } - - fprintf(stderr, "unknown option: %s\n", tok); - } - return 4; - } - - void print_options(char c) - { - int i = 0; - - if (c == 'k') { - printf(" keyboard options:\n" - " --hold\n"); - for (i = 0; kmod[i].opt != NULL; i++) - printf("\t\t%s\n", kmod[i].opt); - printf("\n keyboard values:\n" - " [a-z] or\n"); - for (i = 0; kval[i].opt != NULL; i++) - printf("\t\t%-8s%s", kval[i].opt, i % 2 ? "\n" : ""); - printf("\n"); - } else if (c == 'm') { - printf(" mouse options:\n" - " --hold\n"); - for (i = 0; mmod[i].opt != NULL; i++) - printf("\t\t%s\n", mmod[i].opt); - printf("\n mouse values:\n" - " Two signed numbers\n" - "--quit to close\n"); - } else { - printf(" joystick options:\n"); - for (i = 0; jmod[i].opt != NULL; i++) - printf("\t\t%s\n", jmod[i].opt); - printf("\n joystick values:\n" - " three signed numbers\n" - "--quit to close\n"); - } - } - - int main(int argc, const char *argv[]) - { - const char *filename = NULL; - int fd = 0; - char buf[BUF_LEN]; - int cmd_len; - char report[8]; - int to_send = 8; - int hold = 0; - fd_set rfds; - int retval, i; - - if (argc < 3) { - fprintf(stderr, "Usage: %s devname mouse|keyboard|joystick\n", - argv[0]); - return 1; - } - - if (argv[2][0] != 'k' && argv[2][0] != 'm' && argv[2][0] != 'j') - return 2; - - filename = argv[1]; - - if ((fd = open(filename, O_RDWR, 0666)) == -1) { - perror(filename); - return 3; - } - - print_options(argv[2][0]); - - while (42) { - - FD_ZERO(&rfds); - FD_SET(STDIN_FILENO, &rfds); - FD_SET(fd, &rfds); - - retval = select(fd + 1, &rfds, NULL, NULL, NULL); - if (retval == -1 && errno == EINTR) - continue; - if (retval < 0) { - perror("select()"); - return 4; - } - - if (FD_ISSET(fd, &rfds)) { - cmd_len = read(fd, buf, BUF_LEN - 1); - printf("recv report:"); - for (i = 0; i < cmd_len; i++) - printf(" %02x", buf[i]); - printf("\n"); - } - - if (FD_ISSET(STDIN_FILENO, &rfds)) { - memset(report, 0x0, sizeof(report)); - cmd_len = read(STDIN_FILENO, buf, BUF_LEN - 1); - - if (cmd_len == 0) - break; - - buf[cmd_len - 1] = '\0'; - hold = 0; - - memset(report, 0x0, sizeof(report)); - if (argv[2][0] == 'k') - to_send = keyboard_fill_report(report, buf, &hold); - else if (argv[2][0] == 'm') - to_send = mouse_fill_report(report, buf, &hold); - else - to_send = joystick_fill_report(report, buf, &hold); - - if (to_send == -1) - break; - - if (write(fd, report, to_send) != to_send) { - perror(filename); - return 5; - } - if (!hold) { - memset(report, 0x0, sizeof(report)); - if (write(fd, report, to_send) != to_send) { - perror(filename); - return 6; - } - } - } - } - - close(fd); - return 0; - } diff --git a/Documentation/usb/gadget_multi.rst b/Documentation/usb/gadget_multi.rst new file mode 100644 index 000000000000..9806b55af301 --- /dev/null +++ b/Documentation/usb/gadget_multi.rst @@ -0,0 +1,165 @@ +============================== +Multifunction Composite Gadget +============================== + +Overview +======== + +The Multifunction Composite Gadget (or g_multi) is a composite gadget +that makes extensive use of the composite framework to provide +a... multifunction gadget. + +In it's standard configuration it provides a single USB configuration +with RNDIS[1] (that is Ethernet), USB CDC[2] ACM (that is serial) and +USB Mass Storage functions. + +A CDC ECM (Ethernet) function may be turned on via a Kconfig option +and RNDIS can be turned off. If they are both enabled the gadget will +have two configurations -- one with RNDIS and another with CDC ECM[3]. + +Please note that if you use non-standard configuration (that is enable +CDC ECM) you may need to change vendor and/or product ID. + +Host drivers +============ + +To make use of the gadget one needs to make it work on host side -- +without that there's no hope of achieving anything with the gadget. +As one might expect, things one need to do very from system to system. + +Linux host drivers +------------------ + +Since the gadget uses standard composite framework and appears as such +to Linux host it does not need any additional drivers on Linux host +side. All the functions are handled by respective drivers developed +for them. + +This is also true for two configuration set-up with RNDIS +configuration being the first one. Linux host will use the second +configuration with CDC ECM which should work better under Linux. + +Windows host drivers +-------------------- + +For the gadget to work under Windows two conditions have to be met: + +Detecting as composite gadget +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +First of all, Windows need to detect the gadget as an USB composite +gadget which on its own have some conditions[4]. If they are met, +Windows lets USB Generic Parent Driver[5] handle the device which then +tries to match drivers for each individual interface (sort of, don't +get into too many details). + +The good news is: you do not have to worry about most of the +conditions! + +The only thing to worry is that the gadget has to have a single +configuration so a dual RNDIS and CDC ECM gadget won't work unless you +create a proper INF -- and of course, if you do submit it! + +Installing drivers for each function +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The other, trickier thing is making Windows install drivers for each +individual function. + +For mass storage it is trivial since Windows detect it's an interface +implementing USB Mass Storage class and selects appropriate driver. + +Things are harder with RDNIS and CDC ACM. + +RNDIS +..... + +To make Windows select RNDIS drivers for the first function in the +gadget, one needs to use the [[file:linux.inf]] file provided with this +document. It "attaches" Window's RNDIS driver to the first interface +of the gadget. + +Please note, that while testing we encountered some issues[6] when +RNDIS was not the first interface. You do not need to worry abut it +unless you are trying to develop your own gadget in which case watch +out for this bug. + +CDC ACM +....... + +Similarly, [[file:linux-cdc-acm.inf]] is provided for CDC ACM. + +Customising the gadget +...................... + +If you intend to hack the g_multi gadget be advised that rearranging +functions will obviously change interface numbers for each of the +functionality. As an effect provided INFs won't work since they have +interface numbers hard-coded in them (it's not hard to change those +though[7]). + +This also means, that after experimenting with g_multi and changing +provided functions one should change gadget's vendor and/or product ID +so there will be no collision with other customised gadgets or the +original gadget. + +Failing to comply may cause brain damage after wondering for hours why +things don't work as intended before realising Windows have cached +some drivers information (changing USB port may sometimes help plus +you might try using USBDeview[8] to remove the phantom device). + +INF testing +........... + +Provided INF files have been tested on Windows XP SP3, Windows Vista +and Windows 7, all 32-bit versions. It should work on 64-bit versions +as well. It most likely won't work on Windows prior to Windows XP +SP2. + +Other systems +------------- + +At this moment, drivers for any other systems have not been tested. +Knowing how MacOS is based on BSD and BSD is an Open Source it is +believed that it should (read: "I have no idea whether it will") work +out-of-the-box. + +For more exotic systems I have even less to say... + +Any testing and drivers *are* *welcome*! + +Authors +======= + +This document has been written by Michal Nazarewicz +([[mailto:mina86@mina86.com]]). INF files have been hacked with +support of Marek Szyprowski ([[mailto:m.szyprowski@samsung.com]]) and +Xiaofan Chen ([[mailto:xiaofanc@gmail.com]]) basing on the MS RNDIS +template[9], Microchip's CDC ACM INF file and David Brownell's +([[mailto:dbrownell@users.sourceforge.net]]) original INF files. + +Footnotes +========= + +[1] Remote Network Driver Interface Specification, +[[http://msdn.microsoft.com/en-us/library/ee484414.aspx]]. + +[2] Communications Device Class Abstract Control Model, spec for this +and other USB classes can be found at +[[http://www.usb.org/developers/devclass_docs/]]. + +[3] CDC Ethernet Control Model. + +[4] [[http://msdn.microsoft.com/en-us/library/ff537109(v=VS.85).aspx]] + +[5] [[http://msdn.microsoft.com/en-us/library/ff539234(v=VS.85).aspx]] + +[6] To put it in some other nice words, Windows failed to respond to +any user input. + +[7] You may find [[http://www.cygnal.org/ubb/Forum9/HTML/001050.html]] +useful. + +[8] http://www.nirsoft.net/utils/usb_devices_view.html + +[9] [[http://msdn.microsoft.com/en-us/library/ff570620.aspx]] diff --git a/Documentation/usb/gadget_multi.txt b/Documentation/usb/gadget_multi.txt deleted file mode 100644 index 9806b55af301..000000000000 --- a/Documentation/usb/gadget_multi.txt +++ /dev/null @@ -1,165 +0,0 @@ -============================== -Multifunction Composite Gadget -============================== - -Overview -======== - -The Multifunction Composite Gadget (or g_multi) is a composite gadget -that makes extensive use of the composite framework to provide -a... multifunction gadget. - -In it's standard configuration it provides a single USB configuration -with RNDIS[1] (that is Ethernet), USB CDC[2] ACM (that is serial) and -USB Mass Storage functions. - -A CDC ECM (Ethernet) function may be turned on via a Kconfig option -and RNDIS can be turned off. If they are both enabled the gadget will -have two configurations -- one with RNDIS and another with CDC ECM[3]. - -Please note that if you use non-standard configuration (that is enable -CDC ECM) you may need to change vendor and/or product ID. - -Host drivers -============ - -To make use of the gadget one needs to make it work on host side -- -without that there's no hope of achieving anything with the gadget. -As one might expect, things one need to do very from system to system. - -Linux host drivers ------------------- - -Since the gadget uses standard composite framework and appears as such -to Linux host it does not need any additional drivers on Linux host -side. All the functions are handled by respective drivers developed -for them. - -This is also true for two configuration set-up with RNDIS -configuration being the first one. Linux host will use the second -configuration with CDC ECM which should work better under Linux. - -Windows host drivers --------------------- - -For the gadget to work under Windows two conditions have to be met: - -Detecting as composite gadget -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -First of all, Windows need to detect the gadget as an USB composite -gadget which on its own have some conditions[4]. If they are met, -Windows lets USB Generic Parent Driver[5] handle the device which then -tries to match drivers for each individual interface (sort of, don't -get into too many details). - -The good news is: you do not have to worry about most of the -conditions! - -The only thing to worry is that the gadget has to have a single -configuration so a dual RNDIS and CDC ECM gadget won't work unless you -create a proper INF -- and of course, if you do submit it! - -Installing drivers for each function -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -The other, trickier thing is making Windows install drivers for each -individual function. - -For mass storage it is trivial since Windows detect it's an interface -implementing USB Mass Storage class and selects appropriate driver. - -Things are harder with RDNIS and CDC ACM. - -RNDIS -..... - -To make Windows select RNDIS drivers for the first function in the -gadget, one needs to use the [[file:linux.inf]] file provided with this -document. It "attaches" Window's RNDIS driver to the first interface -of the gadget. - -Please note, that while testing we encountered some issues[6] when -RNDIS was not the first interface. You do not need to worry abut it -unless you are trying to develop your own gadget in which case watch -out for this bug. - -CDC ACM -....... - -Similarly, [[file:linux-cdc-acm.inf]] is provided for CDC ACM. - -Customising the gadget -...................... - -If you intend to hack the g_multi gadget be advised that rearranging -functions will obviously change interface numbers for each of the -functionality. As an effect provided INFs won't work since they have -interface numbers hard-coded in them (it's not hard to change those -though[7]). - -This also means, that after experimenting with g_multi and changing -provided functions one should change gadget's vendor and/or product ID -so there will be no collision with other customised gadgets or the -original gadget. - -Failing to comply may cause brain damage after wondering for hours why -things don't work as intended before realising Windows have cached -some drivers information (changing USB port may sometimes help plus -you might try using USBDeview[8] to remove the phantom device). - -INF testing -........... - -Provided INF files have been tested on Windows XP SP3, Windows Vista -and Windows 7, all 32-bit versions. It should work on 64-bit versions -as well. It most likely won't work on Windows prior to Windows XP -SP2. - -Other systems -------------- - -At this moment, drivers for any other systems have not been tested. -Knowing how MacOS is based on BSD and BSD is an Open Source it is -believed that it should (read: "I have no idea whether it will") work -out-of-the-box. - -For more exotic systems I have even less to say... - -Any testing and drivers *are* *welcome*! - -Authors -======= - -This document has been written by Michal Nazarewicz -([[mailto:mina86@mina86.com]]). INF files have been hacked with -support of Marek Szyprowski ([[mailto:m.szyprowski@samsung.com]]) and -Xiaofan Chen ([[mailto:xiaofanc@gmail.com]]) basing on the MS RNDIS -template[9], Microchip's CDC ACM INF file and David Brownell's -([[mailto:dbrownell@users.sourceforge.net]]) original INF files. - -Footnotes -========= - -[1] Remote Network Driver Interface Specification, -[[http://msdn.microsoft.com/en-us/library/ee484414.aspx]]. - -[2] Communications Device Class Abstract Control Model, spec for this -and other USB classes can be found at -[[http://www.usb.org/developers/devclass_docs/]]. - -[3] CDC Ethernet Control Model. - -[4] [[http://msdn.microsoft.com/en-us/library/ff537109(v=VS.85).aspx]] - -[5] [[http://msdn.microsoft.com/en-us/library/ff539234(v=VS.85).aspx]] - -[6] To put it in some other nice words, Windows failed to respond to -any user input. - -[7] You may find [[http://www.cygnal.org/ubb/Forum9/HTML/001050.html]] -useful. - -[8] http://www.nirsoft.net/utils/usb_devices_view.html - -[9] [[http://msdn.microsoft.com/en-us/library/ff570620.aspx]] diff --git a/Documentation/usb/gadget_printer.rst b/Documentation/usb/gadget_printer.rst new file mode 100644 index 000000000000..5e5516c69075 --- /dev/null +++ b/Documentation/usb/gadget_printer.rst @@ -0,0 +1,523 @@ +=============================== +Linux USB Printer Gadget Driver +=============================== + +06/04/2007 + +Copyright (C) 2007 Craig W. Nadler + + + +General +======= + +This driver may be used if you are writing printer firmware using Linux as +the embedded OS. This driver has nothing to do with using a printer with +your Linux host system. + +You will need a USB device controller and a Linux driver for it that accepts +a gadget / "device class" driver using the Linux USB Gadget API. After the +USB device controller driver is loaded then load the printer gadget driver. +This will present a printer interface to the USB Host that your USB Device +port is connected to. + +This driver is structured for printer firmware that runs in user mode. The +user mode printer firmware will read and write data from the kernel mode +printer gadget driver using a device file. The printer returns a printer status +byte when the USB HOST sends a device request to get the printer status. The +user space firmware can read or write this status byte using a device file +/dev/g_printer . Both blocking and non-blocking read/write calls are supported. + + + + +Howto Use This Driver +===================== + +To load the USB device controller driver and the printer gadget driver. The +following example uses the Netchip 2280 USB device controller driver:: + + modprobe net2280 + modprobe g_printer + + +The follow command line parameter can be used when loading the printer gadget +(ex: modprobe g_printer idVendor=0x0525 idProduct=0xa4a8 ): + +idVendor + This is the Vendor ID used in the device descriptor. The default is + the Netchip vendor id 0x0525. YOU MUST CHANGE TO YOUR OWN VENDOR ID + BEFORE RELEASING A PRODUCT. If you plan to release a product and don't + already have a Vendor ID please see www.usb.org for details on how to + get one. + +idProduct + This is the Product ID used in the device descriptor. The default + is 0xa4a8, you should change this to an ID that's not used by any of + your other USB products if you have any. It would be a good idea to + start numbering your products starting with say 0x0001. + +bcdDevice + This is the version number of your product. It would be a good idea + to put your firmware version here. + +iManufacturer + A string containing the name of the Vendor. + +iProduct + A string containing the Product Name. + +iSerialNum + A string containing the Serial Number. This should be changed for + each unit of your product. + +iPNPstring + The PNP ID string used for this printer. You will want to set + either on the command line or hard code the PNP ID string used for + your printer product. + +qlen + The number of 8k buffers to use per endpoint. The default is 10, you + should tune this for your product. You may also want to tune the + size of each buffer for your product. + + + + +Using The Example Code +====================== + +This example code talks to stdout, instead of a print engine. + +To compile the test code below: + +1) save it to a file called prn_example.c +2) compile the code with the follow command:: + + gcc prn_example.c -o prn_example + + + +To read printer data from the host to stdout:: + + # prn_example -read_data + + +To write printer data from a file (data_file) to the host:: + + # cat data_file | prn_example -write_data + + +To get the current printer status for the gadget driver::: + + # prn_example -get_status + + Printer status is: + Printer is NOT Selected + Paper is Out + Printer OK + + +To set printer to Selected/On-line:: + + # prn_example -selected + + +To set printer to Not Selected/Off-line:: + + # prn_example -not_selected + + +To set paper status to paper out:: + + # prn_example -paper_out + + +To set paper status to paper loaded:: + + # prn_example -paper_loaded + + +To set error status to printer OK:: + + # prn_example -no_error + + +To set error status to ERROR:: + + # prn_example -error + + + + +Example Code +============ + +:: + + + #include + #include + #include + #include + #include + #include + + #define PRINTER_FILE "/dev/g_printer" + #define BUF_SIZE 512 + + + /* + * 'usage()' - Show program usage. + */ + + static void + usage(const char *option) /* I - Option string or NULL */ + { + if (option) { + fprintf(stderr,"prn_example: Unknown option \"%s\"!\n", + option); + } + + fputs("\n", stderr); + fputs("Usage: prn_example -[options]\n", stderr); + fputs("Options:\n", stderr); + fputs("\n", stderr); + fputs("-get_status Get the current printer status.\n", stderr); + fputs("-selected Set the selected status to selected.\n", stderr); + fputs("-not_selected Set the selected status to NOT selected.\n", + stderr); + fputs("-error Set the error status to error.\n", stderr); + fputs("-no_error Set the error status to NO error.\n", stderr); + fputs("-paper_out Set the paper status to paper out.\n", stderr); + fputs("-paper_loaded Set the paper status to paper loaded.\n", + stderr); + fputs("-read_data Read printer data from driver.\n", stderr); + fputs("-write_data Write printer sata to driver.\n", stderr); + fputs("-NB_read_data (Non-Blocking) Read printer data from driver.\n", + stderr); + fputs("\n\n", stderr); + + exit(1); + } + + + static int + read_printer_data() + { + struct pollfd fd[1]; + + /* Open device file for printer gadget. */ + fd[0].fd = open(PRINTER_FILE, O_RDWR); + if (fd[0].fd < 0) { + printf("Error %d opening %s\n", fd[0].fd, PRINTER_FILE); + close(fd[0].fd); + return(-1); + } + + fd[0].events = POLLIN | POLLRDNORM; + + while (1) { + static char buf[BUF_SIZE]; + int bytes_read; + int retval; + + /* Wait for up to 1 second for data. */ + retval = poll(fd, 1, 1000); + + if (retval && (fd[0].revents & POLLRDNORM)) { + + /* Read data from printer gadget driver. */ + bytes_read = read(fd[0].fd, buf, BUF_SIZE); + + if (bytes_read < 0) { + printf("Error %d reading from %s\n", + fd[0].fd, PRINTER_FILE); + close(fd[0].fd); + return(-1); + } else if (bytes_read > 0) { + /* Write data to standard OUTPUT (stdout). */ + fwrite(buf, 1, bytes_read, stdout); + fflush(stdout); + } + + } + + } + + /* Close the device file. */ + close(fd[0].fd); + + return 0; + } + + + static int + write_printer_data() + { + struct pollfd fd[1]; + + /* Open device file for printer gadget. */ + fd[0].fd = open (PRINTER_FILE, O_RDWR); + if (fd[0].fd < 0) { + printf("Error %d opening %s\n", fd[0].fd, PRINTER_FILE); + close(fd[0].fd); + return(-1); + } + + fd[0].events = POLLOUT | POLLWRNORM; + + while (1) { + int retval; + static char buf[BUF_SIZE]; + /* Read data from standard INPUT (stdin). */ + int bytes_read = fread(buf, 1, BUF_SIZE, stdin); + + if (!bytes_read) { + break; + } + + while (bytes_read) { + + /* Wait for up to 1 second to sent data. */ + retval = poll(fd, 1, 1000); + + /* Write data to printer gadget driver. */ + if (retval && (fd[0].revents & POLLWRNORM)) { + retval = write(fd[0].fd, buf, bytes_read); + if (retval < 0) { + printf("Error %d writing to %s\n", + fd[0].fd, + PRINTER_FILE); + close(fd[0].fd); + return(-1); + } else { + bytes_read -= retval; + } + + } + + } + + } + + /* Wait until the data has been sent. */ + fsync(fd[0].fd); + + /* Close the device file. */ + close(fd[0].fd); + + return 0; + } + + + static int + read_NB_printer_data() + { + int fd; + static char buf[BUF_SIZE]; + int bytes_read; + + /* Open device file for printer gadget. */ + fd = open(PRINTER_FILE, O_RDWR|O_NONBLOCK); + if (fd < 0) { + printf("Error %d opening %s\n", fd, PRINTER_FILE); + close(fd); + return(-1); + } + + while (1) { + /* Read data from printer gadget driver. */ + bytes_read = read(fd, buf, BUF_SIZE); + if (bytes_read <= 0) { + break; + } + + /* Write data to standard OUTPUT (stdout). */ + fwrite(buf, 1, bytes_read, stdout); + fflush(stdout); + } + + /* Close the device file. */ + close(fd); + + return 0; + } + + + static int + get_printer_status() + { + int retval; + int fd; + + /* Open device file for printer gadget. */ + fd = open(PRINTER_FILE, O_RDWR); + if (fd < 0) { + printf("Error %d opening %s\n", fd, PRINTER_FILE); + close(fd); + return(-1); + } + + /* Make the IOCTL call. */ + retval = ioctl(fd, GADGET_GET_PRINTER_STATUS); + if (retval < 0) { + fprintf(stderr, "ERROR: Failed to set printer status\n"); + return(-1); + } + + /* Close the device file. */ + close(fd); + + return(retval); + } + + + static int + set_printer_status(unsigned char buf, int clear_printer_status_bit) + { + int retval; + int fd; + + retval = get_printer_status(); + if (retval < 0) { + fprintf(stderr, "ERROR: Failed to get printer status\n"); + return(-1); + } + + /* Open device file for printer gadget. */ + fd = open(PRINTER_FILE, O_RDWR); + + if (fd < 0) { + printf("Error %d opening %s\n", fd, PRINTER_FILE); + close(fd); + return(-1); + } + + if (clear_printer_status_bit) { + retval &= ~buf; + } else { + retval |= buf; + } + + /* Make the IOCTL call. */ + if (ioctl(fd, GADGET_SET_PRINTER_STATUS, (unsigned char)retval)) { + fprintf(stderr, "ERROR: Failed to set printer status\n"); + return(-1); + } + + /* Close the device file. */ + close(fd); + + return 0; + } + + + static int + display_printer_status() + { + char printer_status; + + printer_status = get_printer_status(); + if (printer_status < 0) { + fprintf(stderr, "ERROR: Failed to get printer status\n"); + return(-1); + } + + printf("Printer status is:\n"); + if (printer_status & PRINTER_SELECTED) { + printf(" Printer is Selected\n"); + } else { + printf(" Printer is NOT Selected\n"); + } + if (printer_status & PRINTER_PAPER_EMPTY) { + printf(" Paper is Out\n"); + } else { + printf(" Paper is Loaded\n"); + } + if (printer_status & PRINTER_NOT_ERROR) { + printf(" Printer OK\n"); + } else { + printf(" Printer ERROR\n"); + } + + return(0); + } + + + int + main(int argc, char *argv[]) + { + int i; /* Looping var */ + int retval = 0; + + /* No Args */ + if (argc == 1) { + usage(0); + exit(0); + } + + for (i = 1; i < argc && !retval; i ++) { + + if (argv[i][0] != '-') { + continue; + } + + if (!strcmp(argv[i], "-get_status")) { + if (display_printer_status()) { + retval = 1; + } + + } else if (!strcmp(argv[i], "-paper_loaded")) { + if (set_printer_status(PRINTER_PAPER_EMPTY, 1)) { + retval = 1; + } + + } else if (!strcmp(argv[i], "-paper_out")) { + if (set_printer_status(PRINTER_PAPER_EMPTY, 0)) { + retval = 1; + } + + } else if (!strcmp(argv[i], "-selected")) { + if (set_printer_status(PRINTER_SELECTED, 0)) { + retval = 1; + } + + } else if (!strcmp(argv[i], "-not_selected")) { + if (set_printer_status(PRINTER_SELECTED, 1)) { + retval = 1; + } + + } else if (!strcmp(argv[i], "-error")) { + if (set_printer_status(PRINTER_NOT_ERROR, 1)) { + retval = 1; + } + + } else if (!strcmp(argv[i], "-no_error")) { + if (set_printer_status(PRINTER_NOT_ERROR, 0)) { + retval = 1; + } + + } else if (!strcmp(argv[i], "-read_data")) { + if (read_printer_data()) { + retval = 1; + } + + } else if (!strcmp(argv[i], "-write_data")) { + if (write_printer_data()) { + retval = 1; + } + + } else if (!strcmp(argv[i], "-NB_read_data")) { + if (read_NB_printer_data()) { + retval = 1; + } + + } else { + usage(argv[i]); + retval = 1; + } + } + + exit(retval); + } diff --git a/Documentation/usb/gadget_printer.txt b/Documentation/usb/gadget_printer.txt deleted file mode 100644 index 5e5516c69075..000000000000 --- a/Documentation/usb/gadget_printer.txt +++ /dev/null @@ -1,523 +0,0 @@ -=============================== -Linux USB Printer Gadget Driver -=============================== - -06/04/2007 - -Copyright (C) 2007 Craig W. Nadler - - - -General -======= - -This driver may be used if you are writing printer firmware using Linux as -the embedded OS. This driver has nothing to do with using a printer with -your Linux host system. - -You will need a USB device controller and a Linux driver for it that accepts -a gadget / "device class" driver using the Linux USB Gadget API. After the -USB device controller driver is loaded then load the printer gadget driver. -This will present a printer interface to the USB Host that your USB Device -port is connected to. - -This driver is structured for printer firmware that runs in user mode. The -user mode printer firmware will read and write data from the kernel mode -printer gadget driver using a device file. The printer returns a printer status -byte when the USB HOST sends a device request to get the printer status. The -user space firmware can read or write this status byte using a device file -/dev/g_printer . Both blocking and non-blocking read/write calls are supported. - - - - -Howto Use This Driver -===================== - -To load the USB device controller driver and the printer gadget driver. The -following example uses the Netchip 2280 USB device controller driver:: - - modprobe net2280 - modprobe g_printer - - -The follow command line parameter can be used when loading the printer gadget -(ex: modprobe g_printer idVendor=0x0525 idProduct=0xa4a8 ): - -idVendor - This is the Vendor ID used in the device descriptor. The default is - the Netchip vendor id 0x0525. YOU MUST CHANGE TO YOUR OWN VENDOR ID - BEFORE RELEASING A PRODUCT. If you plan to release a product and don't - already have a Vendor ID please see www.usb.org for details on how to - get one. - -idProduct - This is the Product ID used in the device descriptor. The default - is 0xa4a8, you should change this to an ID that's not used by any of - your other USB products if you have any. It would be a good idea to - start numbering your products starting with say 0x0001. - -bcdDevice - This is the version number of your product. It would be a good idea - to put your firmware version here. - -iManufacturer - A string containing the name of the Vendor. - -iProduct - A string containing the Product Name. - -iSerialNum - A string containing the Serial Number. This should be changed for - each unit of your product. - -iPNPstring - The PNP ID string used for this printer. You will want to set - either on the command line or hard code the PNP ID string used for - your printer product. - -qlen - The number of 8k buffers to use per endpoint. The default is 10, you - should tune this for your product. You may also want to tune the - size of each buffer for your product. - - - - -Using The Example Code -====================== - -This example code talks to stdout, instead of a print engine. - -To compile the test code below: - -1) save it to a file called prn_example.c -2) compile the code with the follow command:: - - gcc prn_example.c -o prn_example - - - -To read printer data from the host to stdout:: - - # prn_example -read_data - - -To write printer data from a file (data_file) to the host:: - - # cat data_file | prn_example -write_data - - -To get the current printer status for the gadget driver::: - - # prn_example -get_status - - Printer status is: - Printer is NOT Selected - Paper is Out - Printer OK - - -To set printer to Selected/On-line:: - - # prn_example -selected - - -To set printer to Not Selected/Off-line:: - - # prn_example -not_selected - - -To set paper status to paper out:: - - # prn_example -paper_out - - -To set paper status to paper loaded:: - - # prn_example -paper_loaded - - -To set error status to printer OK:: - - # prn_example -no_error - - -To set error status to ERROR:: - - # prn_example -error - - - - -Example Code -============ - -:: - - - #include - #include - #include - #include - #include - #include - - #define PRINTER_FILE "/dev/g_printer" - #define BUF_SIZE 512 - - - /* - * 'usage()' - Show program usage. - */ - - static void - usage(const char *option) /* I - Option string or NULL */ - { - if (option) { - fprintf(stderr,"prn_example: Unknown option \"%s\"!\n", - option); - } - - fputs("\n", stderr); - fputs("Usage: prn_example -[options]\n", stderr); - fputs("Options:\n", stderr); - fputs("\n", stderr); - fputs("-get_status Get the current printer status.\n", stderr); - fputs("-selected Set the selected status to selected.\n", stderr); - fputs("-not_selected Set the selected status to NOT selected.\n", - stderr); - fputs("-error Set the error status to error.\n", stderr); - fputs("-no_error Set the error status to NO error.\n", stderr); - fputs("-paper_out Set the paper status to paper out.\n", stderr); - fputs("-paper_loaded Set the paper status to paper loaded.\n", - stderr); - fputs("-read_data Read printer data from driver.\n", stderr); - fputs("-write_data Write printer sata to driver.\n", stderr); - fputs("-NB_read_data (Non-Blocking) Read printer data from driver.\n", - stderr); - fputs("\n\n", stderr); - - exit(1); - } - - - static int - read_printer_data() - { - struct pollfd fd[1]; - - /* Open device file for printer gadget. */ - fd[0].fd = open(PRINTER_FILE, O_RDWR); - if (fd[0].fd < 0) { - printf("Error %d opening %s\n", fd[0].fd, PRINTER_FILE); - close(fd[0].fd); - return(-1); - } - - fd[0].events = POLLIN | POLLRDNORM; - - while (1) { - static char buf[BUF_SIZE]; - int bytes_read; - int retval; - - /* Wait for up to 1 second for data. */ - retval = poll(fd, 1, 1000); - - if (retval && (fd[0].revents & POLLRDNORM)) { - - /* Read data from printer gadget driver. */ - bytes_read = read(fd[0].fd, buf, BUF_SIZE); - - if (bytes_read < 0) { - printf("Error %d reading from %s\n", - fd[0].fd, PRINTER_FILE); - close(fd[0].fd); - return(-1); - } else if (bytes_read > 0) { - /* Write data to standard OUTPUT (stdout). */ - fwrite(buf, 1, bytes_read, stdout); - fflush(stdout); - } - - } - - } - - /* Close the device file. */ - close(fd[0].fd); - - return 0; - } - - - static int - write_printer_data() - { - struct pollfd fd[1]; - - /* Open device file for printer gadget. */ - fd[0].fd = open (PRINTER_FILE, O_RDWR); - if (fd[0].fd < 0) { - printf("Error %d opening %s\n", fd[0].fd, PRINTER_FILE); - close(fd[0].fd); - return(-1); - } - - fd[0].events = POLLOUT | POLLWRNORM; - - while (1) { - int retval; - static char buf[BUF_SIZE]; - /* Read data from standard INPUT (stdin). */ - int bytes_read = fread(buf, 1, BUF_SIZE, stdin); - - if (!bytes_read) { - break; - } - - while (bytes_read) { - - /* Wait for up to 1 second to sent data. */ - retval = poll(fd, 1, 1000); - - /* Write data to printer gadget driver. */ - if (retval && (fd[0].revents & POLLWRNORM)) { - retval = write(fd[0].fd, buf, bytes_read); - if (retval < 0) { - printf("Error %d writing to %s\n", - fd[0].fd, - PRINTER_FILE); - close(fd[0].fd); - return(-1); - } else { - bytes_read -= retval; - } - - } - - } - - } - - /* Wait until the data has been sent. */ - fsync(fd[0].fd); - - /* Close the device file. */ - close(fd[0].fd); - - return 0; - } - - - static int - read_NB_printer_data() - { - int fd; - static char buf[BUF_SIZE]; - int bytes_read; - - /* Open device file for printer gadget. */ - fd = open(PRINTER_FILE, O_RDWR|O_NONBLOCK); - if (fd < 0) { - printf("Error %d opening %s\n", fd, PRINTER_FILE); - close(fd); - return(-1); - } - - while (1) { - /* Read data from printer gadget driver. */ - bytes_read = read(fd, buf, BUF_SIZE); - if (bytes_read <= 0) { - break; - } - - /* Write data to standard OUTPUT (stdout). */ - fwrite(buf, 1, bytes_read, stdout); - fflush(stdout); - } - - /* Close the device file. */ - close(fd); - - return 0; - } - - - static int - get_printer_status() - { - int retval; - int fd; - - /* Open device file for printer gadget. */ - fd = open(PRINTER_FILE, O_RDWR); - if (fd < 0) { - printf("Error %d opening %s\n", fd, PRINTER_FILE); - close(fd); - return(-1); - } - - /* Make the IOCTL call. */ - retval = ioctl(fd, GADGET_GET_PRINTER_STATUS); - if (retval < 0) { - fprintf(stderr, "ERROR: Failed to set printer status\n"); - return(-1); - } - - /* Close the device file. */ - close(fd); - - return(retval); - } - - - static int - set_printer_status(unsigned char buf, int clear_printer_status_bit) - { - int retval; - int fd; - - retval = get_printer_status(); - if (retval < 0) { - fprintf(stderr, "ERROR: Failed to get printer status\n"); - return(-1); - } - - /* Open device file for printer gadget. */ - fd = open(PRINTER_FILE, O_RDWR); - - if (fd < 0) { - printf("Error %d opening %s\n", fd, PRINTER_FILE); - close(fd); - return(-1); - } - - if (clear_printer_status_bit) { - retval &= ~buf; - } else { - retval |= buf; - } - - /* Make the IOCTL call. */ - if (ioctl(fd, GADGET_SET_PRINTER_STATUS, (unsigned char)retval)) { - fprintf(stderr, "ERROR: Failed to set printer status\n"); - return(-1); - } - - /* Close the device file. */ - close(fd); - - return 0; - } - - - static int - display_printer_status() - { - char printer_status; - - printer_status = get_printer_status(); - if (printer_status < 0) { - fprintf(stderr, "ERROR: Failed to get printer status\n"); - return(-1); - } - - printf("Printer status is:\n"); - if (printer_status & PRINTER_SELECTED) { - printf(" Printer is Selected\n"); - } else { - printf(" Printer is NOT Selected\n"); - } - if (printer_status & PRINTER_PAPER_EMPTY) { - printf(" Paper is Out\n"); - } else { - printf(" Paper is Loaded\n"); - } - if (printer_status & PRINTER_NOT_ERROR) { - printf(" Printer OK\n"); - } else { - printf(" Printer ERROR\n"); - } - - return(0); - } - - - int - main(int argc, char *argv[]) - { - int i; /* Looping var */ - int retval = 0; - - /* No Args */ - if (argc == 1) { - usage(0); - exit(0); - } - - for (i = 1; i < argc && !retval; i ++) { - - if (argv[i][0] != '-') { - continue; - } - - if (!strcmp(argv[i], "-get_status")) { - if (display_printer_status()) { - retval = 1; - } - - } else if (!strcmp(argv[i], "-paper_loaded")) { - if (set_printer_status(PRINTER_PAPER_EMPTY, 1)) { - retval = 1; - } - - } else if (!strcmp(argv[i], "-paper_out")) { - if (set_printer_status(PRINTER_PAPER_EMPTY, 0)) { - retval = 1; - } - - } else if (!strcmp(argv[i], "-selected")) { - if (set_printer_status(PRINTER_SELECTED, 0)) { - retval = 1; - } - - } else if (!strcmp(argv[i], "-not_selected")) { - if (set_printer_status(PRINTER_SELECTED, 1)) { - retval = 1; - } - - } else if (!strcmp(argv[i], "-error")) { - if (set_printer_status(PRINTER_NOT_ERROR, 1)) { - retval = 1; - } - - } else if (!strcmp(argv[i], "-no_error")) { - if (set_printer_status(PRINTER_NOT_ERROR, 0)) { - retval = 1; - } - - } else if (!strcmp(argv[i], "-read_data")) { - if (read_printer_data()) { - retval = 1; - } - - } else if (!strcmp(argv[i], "-write_data")) { - if (write_printer_data()) { - retval = 1; - } - - } else if (!strcmp(argv[i], "-NB_read_data")) { - if (read_NB_printer_data()) { - retval = 1; - } - - } else { - usage(argv[i]); - retval = 1; - } - } - - exit(retval); - } diff --git a/Documentation/usb/gadget_serial.rst b/Documentation/usb/gadget_serial.rst new file mode 100644 index 000000000000..dce8bc1fb1f2 --- /dev/null +++ b/Documentation/usb/gadget_serial.rst @@ -0,0 +1,289 @@ +=============================== +Linux Gadget Serial Driver v2.0 +=============================== + +11/20/2004 + +(updated 8-May-2008 for v2.3) + + +License and Disclaimer +---------------------- +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License as +published by the Free Software Foundation; either version 2 of +the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public +License along with this program; if not, write to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, +MA 02111-1307 USA. + +This document and the gadget serial driver itself are +Copyright (C) 2004 by Al Borchers (alborchers@steinerpoint.com). + +If you have questions, problems, or suggestions for this driver +please contact Al Borchers at alborchers@steinerpoint.com. + + +Prerequisites +------------- +Versions of the gadget serial driver are available for the +2.4 Linux kernels, but this document assumes you are using +version 2.3 or later of the gadget serial driver in a 2.6 +Linux kernel. + +This document assumes that you are familiar with Linux and +Windows and know how to configure and build Linux kernels, run +standard utilities, use minicom and HyperTerminal, and work with +USB and serial devices. It also assumes you configure the Linux +gadget and usb drivers as modules. + +With version 2.3 of the driver, major and minor device nodes are +no longer statically defined. Your Linux based system should mount +sysfs in /sys, and use "mdev" (in Busybox) or "udev" to make the +/dev nodes matching the sysfs /sys/class/tty files. + + + +Overview +-------- +The gadget serial driver is a Linux USB gadget driver, a USB device +side driver. It runs on a Linux system that has USB device side +hardware; for example, a PDA, an embedded Linux system, or a PC +with a USB development card. + +The gadget serial driver talks over USB to either a CDC ACM driver +or a generic USB serial driver running on a host PC:: + + Host + -------------------------------------- + | Host-Side CDC ACM USB Host | + | Operating | or | Controller | USB + | System | Generic USB | Driver |-------- + | (Linux or | Serial | and | | + | Windows) Driver USB Stack | | + -------------------------------------- | + | + | + | + Gadget | + -------------------------------------- | + | Gadget USB Periph. | | + | Device-Side | Gadget | Controller | | + | Linux | Serial | Driver |-------- + | Operating | Driver | and | + | System USB Stack | + -------------------------------------- + +On the device-side Linux system, the gadget serial driver looks +like a serial device. + +On the host-side system, the gadget serial device looks like a +CDC ACM compliant class device or a simple vendor specific device +with bulk in and bulk out endpoints, and it is treated similarly +to other serial devices. + +The host side driver can potentially be any ACM compliant driver +or any driver that can talk to a device with a simple bulk in/out +interface. Gadget serial has been tested with the Linux ACM driver, +the Windows usbser.sys ACM driver, and the Linux USB generic serial +driver. + +With the gadget serial driver and the host side ACM or generic +serial driver running, you should be able to communicate between +the host and the gadget side systems as if they were connected by a +serial cable. + +The gadget serial driver only provides simple unreliable data +communication. It does not yet handle flow control or many other +features of normal serial devices. + + +Installing the Gadget Serial Driver +----------------------------------- +To use the gadget serial driver you must configure the Linux gadget +side kernel for "Support for USB Gadgets", for a "USB Peripheral +Controller" (for example, net2280), and for the "Serial Gadget" +driver. All this are listed under "USB Gadget Support" when +configuring the kernel. Then rebuild and install the kernel or +modules. + +Then you must load the gadget serial driver. To load it as an +ACM device (recommended for interoperability), do this:: + + modprobe g_serial + +To load it as a vendor specific bulk in/out device, do this:: + + modprobe g_serial use_acm=0 + +This will also automatically load the underlying gadget peripheral +controller driver. This must be done each time you reboot the gadget +side Linux system. You can add this to the start up scripts, if +desired. + +Your system should use mdev (from busybox) or udev to make the +device nodes. After this gadget driver has been set up you should +then see a /dev/ttyGS0 node:: + + # ls -l /dev/ttyGS0 | cat + crw-rw---- 1 root root 253, 0 May 8 14:10 /dev/ttyGS0 + # + +Note that the major number (253, above) is system-specific. If +you need to create /dev nodes by hand, the right numbers to use +will be in the /sys/class/tty/ttyGS0/dev file. + +When you link this gadget driver early, perhaps even statically, +you may want to set up an /etc/inittab entry to run "getty" on it. +The /dev/ttyGS0 line should work like most any other serial port. + + +If gadget serial is loaded as an ACM device you will want to use +either the Windows or Linux ACM driver on the host side. If gadget +serial is loaded as a bulk in/out device, you will want to use the +Linux generic serial driver on the host side. Follow the appropriate +instructions below to install the host side driver. + + +Installing the Windows Host ACM Driver +-------------------------------------- +To use the Windows ACM driver you must have the "linux-cdc-acm.inf" +file (provided along this document) which supports all recent versions +of Windows. + +When the gadget serial driver is loaded and the USB device connected +to the Windows host with a USB cable, Windows should recognize the +gadget serial device and ask for a driver. Tell Windows to find the +driver in the folder that contains the "linux-cdc-acm.inf" file. + +For example, on Windows XP, when the gadget serial device is first +plugged in, the "Found New Hardware Wizard" starts up. Select +"Install from a list or specific location (Advanced)", then on the +next screen select "Include this location in the search" and enter the +path or browse to the folder containing the "linux-cdc-acm.inf" file. +Windows will complain that the Gadget Serial driver has not passed +Windows Logo testing, but select "Continue anyway" and finish the +driver installation. + +On Windows XP, in the "Device Manager" (under "Control Panel", +"System", "Hardware") expand the "Ports (COM & LPT)" entry and you +should see "Gadget Serial" listed as the driver for one of the COM +ports. + +To uninstall the Windows XP driver for "Gadget Serial", right click +on the "Gadget Serial" entry in the "Device Manager" and select +"Uninstall". + + +Installing the Linux Host ACM Driver +------------------------------------ +To use the Linux ACM driver you must configure the Linux host side +kernel for "Support for Host-side USB" and for "USB Modem (CDC ACM) +support". + +Once the gadget serial driver is loaded and the USB device connected +to the Linux host with a USB cable, the host system should recognize +the gadget serial device. For example, the command:: + + cat /sys/kernel/debug/usb/devices + +should show something like this::: + + T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 + D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 + P: Vendor=0525 ProdID=a4a7 Rev= 2.01 + S: Manufacturer=Linux 2.6.8.1 with net2280 + S: Product=Gadget Serial + S: SerialNumber=0 + C:* #Ifs= 2 Cfg#= 2 Atr=c0 MxPwr= 2mA + I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm + E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms + I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm + E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms + E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms + +If the host side Linux system is configured properly, the ACM driver +should be loaded automatically. The command "lsmod" should show the +"acm" module is loaded. + + +Installing the Linux Host Generic USB Serial Driver +--------------------------------------------------- +To use the Linux generic USB serial driver you must configure the +Linux host side kernel for "Support for Host-side USB", for "USB +Serial Converter support", and for the "USB Generic Serial Driver". + +Once the gadget serial driver is loaded and the USB device connected +to the Linux host with a USB cable, the host system should recognize +the gadget serial device. For example, the command:: + + cat /sys/kernel/debug/usb/devices + +should show something like this::: + + T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 6 Spd=480 MxCh= 0 + D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 + P: Vendor=0525 ProdID=a4a6 Rev= 2.01 + S: Manufacturer=Linux 2.6.8.1 with net2280 + S: Product=Gadget Serial + S: SerialNumber=0 + C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA + I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=serial + E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms + E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms + +You must load the usbserial driver and explicitly set its parameters +to configure it to recognize the gadget serial device, like this:: + + echo 0x0525 0xA4A6 >/sys/bus/usb-serial/drivers/generic/new_id + +The legacy way is to use module parameters:: + + modprobe usbserial vendor=0x0525 product=0xA4A6 + +If everything is working, usbserial will print a message in the +system log saying something like "Gadget Serial converter now +attached to ttyUSB0". + + +Testing with Minicom or HyperTerminal +------------------------------------- +Once the gadget serial driver and the host driver are both installed, +and a USB cable connects the gadget device to the host, you should +be able to communicate over USB between the gadget and host systems. +You can use minicom or HyperTerminal to try this out. + +On the gadget side run "minicom -s" to configure a new minicom +session. Under "Serial port setup" set "/dev/ttygserial" as the +"Serial Device". Set baud rate, data bits, parity, and stop bits, +to 9600, 8, none, and 1--these settings mostly do not matter. +Under "Modem and dialing" erase all the modem and dialing strings. + +On a Linux host running the ACM driver, configure minicom similarly +but use "/dev/ttyACM0" as the "Serial Device". (If you have other +ACM devices connected, change the device name appropriately.) + +On a Linux host running the USB generic serial driver, configure +minicom similarly, but use "/dev/ttyUSB0" as the "Serial Device". +(If you have other USB serial devices connected, change the device +name appropriately.) + +On a Windows host configure a new HyperTerminal session to use the +COM port assigned to Gadget Serial. The "Port Settings" will be +set automatically when HyperTerminal connects to the gadget serial +device, so you can leave them set to the default values--these +settings mostly do not matter. + +With minicom configured and running on the gadget side and with +minicom or HyperTerminal configured and running on the host side, +you should be able to send data back and forth between the gadget +side and host side systems. Anything you type on the terminal +window on the gadget side should appear in the terminal window on +the host side and vice versa. diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt deleted file mode 100644 index dce8bc1fb1f2..000000000000 --- a/Documentation/usb/gadget_serial.txt +++ /dev/null @@ -1,289 +0,0 @@ -=============================== -Linux Gadget Serial Driver v2.0 -=============================== - -11/20/2004 - -(updated 8-May-2008 for v2.3) - - -License and Disclaimer ----------------------- -This program is free software; you can redistribute it and/or -modify it under the terms of the GNU General Public License as -published by the Free Software Foundation; either version 2 of -the License, or (at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public -License along with this program; if not, write to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, -MA 02111-1307 USA. - -This document and the gadget serial driver itself are -Copyright (C) 2004 by Al Borchers (alborchers@steinerpoint.com). - -If you have questions, problems, or suggestions for this driver -please contact Al Borchers at alborchers@steinerpoint.com. - - -Prerequisites -------------- -Versions of the gadget serial driver are available for the -2.4 Linux kernels, but this document assumes you are using -version 2.3 or later of the gadget serial driver in a 2.6 -Linux kernel. - -This document assumes that you are familiar with Linux and -Windows and know how to configure and build Linux kernels, run -standard utilities, use minicom and HyperTerminal, and work with -USB and serial devices. It also assumes you configure the Linux -gadget and usb drivers as modules. - -With version 2.3 of the driver, major and minor device nodes are -no longer statically defined. Your Linux based system should mount -sysfs in /sys, and use "mdev" (in Busybox) or "udev" to make the -/dev nodes matching the sysfs /sys/class/tty files. - - - -Overview --------- -The gadget serial driver is a Linux USB gadget driver, a USB device -side driver. It runs on a Linux system that has USB device side -hardware; for example, a PDA, an embedded Linux system, or a PC -with a USB development card. - -The gadget serial driver talks over USB to either a CDC ACM driver -or a generic USB serial driver running on a host PC:: - - Host - -------------------------------------- - | Host-Side CDC ACM USB Host | - | Operating | or | Controller | USB - | System | Generic USB | Driver |-------- - | (Linux or | Serial | and | | - | Windows) Driver USB Stack | | - -------------------------------------- | - | - | - | - Gadget | - -------------------------------------- | - | Gadget USB Periph. | | - | Device-Side | Gadget | Controller | | - | Linux | Serial | Driver |-------- - | Operating | Driver | and | - | System USB Stack | - -------------------------------------- - -On the device-side Linux system, the gadget serial driver looks -like a serial device. - -On the host-side system, the gadget serial device looks like a -CDC ACM compliant class device or a simple vendor specific device -with bulk in and bulk out endpoints, and it is treated similarly -to other serial devices. - -The host side driver can potentially be any ACM compliant driver -or any driver that can talk to a device with a simple bulk in/out -interface. Gadget serial has been tested with the Linux ACM driver, -the Windows usbser.sys ACM driver, and the Linux USB generic serial -driver. - -With the gadget serial driver and the host side ACM or generic -serial driver running, you should be able to communicate between -the host and the gadget side systems as if they were connected by a -serial cable. - -The gadget serial driver only provides simple unreliable data -communication. It does not yet handle flow control or many other -features of normal serial devices. - - -Installing the Gadget Serial Driver ------------------------------------ -To use the gadget serial driver you must configure the Linux gadget -side kernel for "Support for USB Gadgets", for a "USB Peripheral -Controller" (for example, net2280), and for the "Serial Gadget" -driver. All this are listed under "USB Gadget Support" when -configuring the kernel. Then rebuild and install the kernel or -modules. - -Then you must load the gadget serial driver. To load it as an -ACM device (recommended for interoperability), do this:: - - modprobe g_serial - -To load it as a vendor specific bulk in/out device, do this:: - - modprobe g_serial use_acm=0 - -This will also automatically load the underlying gadget peripheral -controller driver. This must be done each time you reboot the gadget -side Linux system. You can add this to the start up scripts, if -desired. - -Your system should use mdev (from busybox) or udev to make the -device nodes. After this gadget driver has been set up you should -then see a /dev/ttyGS0 node:: - - # ls -l /dev/ttyGS0 | cat - crw-rw---- 1 root root 253, 0 May 8 14:10 /dev/ttyGS0 - # - -Note that the major number (253, above) is system-specific. If -you need to create /dev nodes by hand, the right numbers to use -will be in the /sys/class/tty/ttyGS0/dev file. - -When you link this gadget driver early, perhaps even statically, -you may want to set up an /etc/inittab entry to run "getty" on it. -The /dev/ttyGS0 line should work like most any other serial port. - - -If gadget serial is loaded as an ACM device you will want to use -either the Windows or Linux ACM driver on the host side. If gadget -serial is loaded as a bulk in/out device, you will want to use the -Linux generic serial driver on the host side. Follow the appropriate -instructions below to install the host side driver. - - -Installing the Windows Host ACM Driver --------------------------------------- -To use the Windows ACM driver you must have the "linux-cdc-acm.inf" -file (provided along this document) which supports all recent versions -of Windows. - -When the gadget serial driver is loaded and the USB device connected -to the Windows host with a USB cable, Windows should recognize the -gadget serial device and ask for a driver. Tell Windows to find the -driver in the folder that contains the "linux-cdc-acm.inf" file. - -For example, on Windows XP, when the gadget serial device is first -plugged in, the "Found New Hardware Wizard" starts up. Select -"Install from a list or specific location (Advanced)", then on the -next screen select "Include this location in the search" and enter the -path or browse to the folder containing the "linux-cdc-acm.inf" file. -Windows will complain that the Gadget Serial driver has not passed -Windows Logo testing, but select "Continue anyway" and finish the -driver installation. - -On Windows XP, in the "Device Manager" (under "Control Panel", -"System", "Hardware") expand the "Ports (COM & LPT)" entry and you -should see "Gadget Serial" listed as the driver for one of the COM -ports. - -To uninstall the Windows XP driver for "Gadget Serial", right click -on the "Gadget Serial" entry in the "Device Manager" and select -"Uninstall". - - -Installing the Linux Host ACM Driver ------------------------------------- -To use the Linux ACM driver you must configure the Linux host side -kernel for "Support for Host-side USB" and for "USB Modem (CDC ACM) -support". - -Once the gadget serial driver is loaded and the USB device connected -to the Linux host with a USB cable, the host system should recognize -the gadget serial device. For example, the command:: - - cat /sys/kernel/debug/usb/devices - -should show something like this::: - - T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 - D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 - P: Vendor=0525 ProdID=a4a7 Rev= 2.01 - S: Manufacturer=Linux 2.6.8.1 with net2280 - S: Product=Gadget Serial - S: SerialNumber=0 - C:* #Ifs= 2 Cfg#= 2 Atr=c0 MxPwr= 2mA - I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm - E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms - I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm - E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms - E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms - -If the host side Linux system is configured properly, the ACM driver -should be loaded automatically. The command "lsmod" should show the -"acm" module is loaded. - - -Installing the Linux Host Generic USB Serial Driver ---------------------------------------------------- -To use the Linux generic USB serial driver you must configure the -Linux host side kernel for "Support for Host-side USB", for "USB -Serial Converter support", and for the "USB Generic Serial Driver". - -Once the gadget serial driver is loaded and the USB device connected -to the Linux host with a USB cable, the host system should recognize -the gadget serial device. For example, the command:: - - cat /sys/kernel/debug/usb/devices - -should show something like this::: - - T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 6 Spd=480 MxCh= 0 - D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 - P: Vendor=0525 ProdID=a4a6 Rev= 2.01 - S: Manufacturer=Linux 2.6.8.1 with net2280 - S: Product=Gadget Serial - S: SerialNumber=0 - C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA - I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=serial - E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms - E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms - -You must load the usbserial driver and explicitly set its parameters -to configure it to recognize the gadget serial device, like this:: - - echo 0x0525 0xA4A6 >/sys/bus/usb-serial/drivers/generic/new_id - -The legacy way is to use module parameters:: - - modprobe usbserial vendor=0x0525 product=0xA4A6 - -If everything is working, usbserial will print a message in the -system log saying something like "Gadget Serial converter now -attached to ttyUSB0". - - -Testing with Minicom or HyperTerminal -------------------------------------- -Once the gadget serial driver and the host driver are both installed, -and a USB cable connects the gadget device to the host, you should -be able to communicate over USB between the gadget and host systems. -You can use minicom or HyperTerminal to try this out. - -On the gadget side run "minicom -s" to configure a new minicom -session. Under "Serial port setup" set "/dev/ttygserial" as the -"Serial Device". Set baud rate, data bits, parity, and stop bits, -to 9600, 8, none, and 1--these settings mostly do not matter. -Under "Modem and dialing" erase all the modem and dialing strings. - -On a Linux host running the ACM driver, configure minicom similarly -but use "/dev/ttyACM0" as the "Serial Device". (If you have other -ACM devices connected, change the device name appropriately.) - -On a Linux host running the USB generic serial driver, configure -minicom similarly, but use "/dev/ttyUSB0" as the "Serial Device". -(If you have other USB serial devices connected, change the device -name appropriately.) - -On a Windows host configure a new HyperTerminal session to use the -COM port assigned to Gadget Serial. The "Port Settings" will be -set automatically when HyperTerminal connects to the gadget serial -device, so you can leave them set to the default values--these -settings mostly do not matter. - -With minicom configured and running on the gadget side and with -minicom or HyperTerminal configured and running on the host side, -you should be able to send data back and forth between the gadget -side and host side systems. Anything you type on the terminal -window on the gadget side should appear in the terminal window on -the host side and vice versa. diff --git a/Documentation/usb/index.rst b/Documentation/usb/index.rst new file mode 100644 index 000000000000..e55386a4abfb --- /dev/null +++ b/Documentation/usb/index.rst @@ -0,0 +1,39 @@ +=========== +USB support +=========== + +.. toctree:: + :maxdepth: 1 + + acm + authorization + chipidea + dwc3 + ehci + functionfs + gadget_configfs + gadget_hid + gadget_multi + gadget_printer + gadget_serial + gadget-testing + iuu_phoenix + mass-storage + misc_usbsevseg + mtouchusb + ohci + rio + usbip_protocol + usbmon + usb-serial + wusb-design-overview + + usb-help + text_files + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/usb/iuu_phoenix.rst b/Documentation/usb/iuu_phoenix.rst new file mode 100644 index 000000000000..b76268728450 --- /dev/null +++ b/Documentation/usb/iuu_phoenix.rst @@ -0,0 +1,94 @@ +============================= +Infinity Usb Unlimited Readme +============================= + +Hi all, + + +This module provide a serial interface to use your +IUU unit in phoenix mode. Loading this module will +bring a ttyUSB[0-x] interface. This driver must be +used by your favorite application to pilot the IUU + +This driver is still in beta stage, so bugs can +occur and your system may freeze. As far I now, +I never had any problem with it, but I'm not a real +guru, so don't blame me if your system is unstable + +You can plug more than one IUU. Every unit will +have his own device file(/dev/ttyUSB0,/dev/ttyUSB1,...) + + + +How to tune the reader speed? +============================= + + A few parameters can be used at load time + To use parameters, just unload the module if it is + already loaded and use modprobe iuu_phoenix param=value. + In case of prebuilt module, use the command + insmod iuu_phoenix param=value. + + Example:: + + modprobe iuu_phoenix clockmode=3 + + The parameters are: + +clockmode: + 1=3Mhz579,2=3Mhz680,3=6Mhz (int) +boost: + overclock boost percent 100 to 500 (int) +cdmode: + Card detect mode + 0=none, 1=CD, 2=!CD, 3=DSR, 4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING (int) +xmas: + xmas color enabled or not (bool) +debug: + Debug enabled or not (bool) + +- clockmode will provide 3 different base settings commonly adopted by + different software: + + 1. 3Mhz579 + 2. 3Mhz680 + 3. 6Mhz + +- boost provide a way to overclock the reader ( my favorite :-) ) + For example to have best performance than a simple clockmode=3, try this:: + + modprobe boost=195 + + This will put the reader in a base of 3Mhz579 but boosted a 195 % ! + the real clock will be now : 6979050 Hz ( 6Mhz979 ) and will increase + the speed to a score 10 to 20% better than the simple clockmode=3 !!! + + +- cdmode permit to setup the signal used to inform the userland ( ioctl answer ) + if the card is present or not. Eight signals are possible. + +- xmas is completely useless except for your eyes. This is one of my friend who was + so sad to have a nice device like the iuu without seeing all color range available. + So I have added this option to permit him to see a lot of color ( each activity change the color + and the frequency randomly ) + +- debug will produce a lot of debugging messages... + + +Last notes +========== + + Don't worry about the serial settings, the serial emulation + is an abstraction, so use any speed or parity setting will + work. ( This will not change anything ).Later I will perhaps + use this settings to deduce de boost but is that feature + really necessary ? + The autodetect feature used is the serial CD. If that doesn't + work for your software, disable detection mechanism in it. + + + Have fun ! + + Alain Degreffe + + eczema(at)ecze.com diff --git a/Documentation/usb/iuu_phoenix.txt b/Documentation/usb/iuu_phoenix.txt deleted file mode 100644 index b76268728450..000000000000 --- a/Documentation/usb/iuu_phoenix.txt +++ /dev/null @@ -1,94 +0,0 @@ -============================= -Infinity Usb Unlimited Readme -============================= - -Hi all, - - -This module provide a serial interface to use your -IUU unit in phoenix mode. Loading this module will -bring a ttyUSB[0-x] interface. This driver must be -used by your favorite application to pilot the IUU - -This driver is still in beta stage, so bugs can -occur and your system may freeze. As far I now, -I never had any problem with it, but I'm not a real -guru, so don't blame me if your system is unstable - -You can plug more than one IUU. Every unit will -have his own device file(/dev/ttyUSB0,/dev/ttyUSB1,...) - - - -How to tune the reader speed? -============================= - - A few parameters can be used at load time - To use parameters, just unload the module if it is - already loaded and use modprobe iuu_phoenix param=value. - In case of prebuilt module, use the command - insmod iuu_phoenix param=value. - - Example:: - - modprobe iuu_phoenix clockmode=3 - - The parameters are: - -clockmode: - 1=3Mhz579,2=3Mhz680,3=6Mhz (int) -boost: - overclock boost percent 100 to 500 (int) -cdmode: - Card detect mode - 0=none, 1=CD, 2=!CD, 3=DSR, 4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING (int) -xmas: - xmas color enabled or not (bool) -debug: - Debug enabled or not (bool) - -- clockmode will provide 3 different base settings commonly adopted by - different software: - - 1. 3Mhz579 - 2. 3Mhz680 - 3. 6Mhz - -- boost provide a way to overclock the reader ( my favorite :-) ) - For example to have best performance than a simple clockmode=3, try this:: - - modprobe boost=195 - - This will put the reader in a base of 3Mhz579 but boosted a 195 % ! - the real clock will be now : 6979050 Hz ( 6Mhz979 ) and will increase - the speed to a score 10 to 20% better than the simple clockmode=3 !!! - - -- cdmode permit to setup the signal used to inform the userland ( ioctl answer ) - if the card is present or not. Eight signals are possible. - -- xmas is completely useless except for your eyes. This is one of my friend who was - so sad to have a nice device like the iuu without seeing all color range available. - So I have added this option to permit him to see a lot of color ( each activity change the color - and the frequency randomly ) - -- debug will produce a lot of debugging messages... - - -Last notes -========== - - Don't worry about the serial settings, the serial emulation - is an abstraction, so use any speed or parity setting will - work. ( This will not change anything ).Later I will perhaps - use this settings to deduce de boost but is that feature - really necessary ? - The autodetect feature used is the serial CD. If that doesn't - work for your software, disable detection mechanism in it. - - - Have fun ! - - Alain Degreffe - - eczema(at)ecze.com diff --git a/Documentation/usb/mass-storage.rst b/Documentation/usb/mass-storage.rst new file mode 100644 index 000000000000..d181b47c3cb6 --- /dev/null +++ b/Documentation/usb/mass-storage.rst @@ -0,0 +1,234 @@ +========================= +Mass Storage Gadget (MSG) +========================= + +Overview +======== + + Mass Storage Gadget (or MSG) acts as a USB Mass Storage device, + appearing to the host as a disk or a CD-ROM drive. It supports + multiple logical units (LUNs). Backing storage for each LUN is + provided by a regular file or a block device, access can be limited + to read-only, and gadget can indicate that it is removable and/or + CD-ROM (the latter implies read-only access). + + Its requirements are modest; only a bulk-in and a bulk-out endpoint + are needed. The memory requirement amounts to two 16K buffers. + Support is included for full-speed, high-speed and SuperSpeed + operation. + + Note that the driver is slightly non-portable in that it assumes + a single memory/DMA buffer will be usable for bulk-in and bulk-out + endpoints. With most device controllers this is not an issue, but + there may be some with hardware restrictions that prevent a buffer + from being used by more than one endpoint. + + This document describes how to use the gadget from user space, its + relation to mass storage function (or MSF) and different gadgets + using it, and how it differs from File Storage Gadget (or FSG) + (which is no longer included in Linux). It will talk only briefly + about how to use MSF within composite gadgets. + +Module parameters +================= + + The mass storage gadget accepts the following mass storage specific + module parameters: + + - file=filename[,filename...] + + This parameter lists paths to files or block devices used for + backing storage for each logical unit. There may be at most + FSG_MAX_LUNS (8) LUNs set. If more files are specified, they will + be silently ignored. See also “luns” parameter. + + *BEWARE* that if a file is used as a backing storage, it may not + be modified by any other process. This is because the host + assumes the data does not change without its knowledge. It may be + read, but (if the logical unit is writable) due to buffering on + the host side, the contents are not well defined. + + The size of the logical unit will be rounded down to a full + logical block. The logical block size is 2048 bytes for LUNs + simulating CD-ROM, block size of the device if the backing file is + a block device, or 512 bytes otherwise. + + - removable=b[,b...] + + This parameter specifies whether each logical unit should be + removable. “b” here is either “y”, “Y” or “1” for true or “n”, + “N” or “0” for false. + + If this option is set for a logical unit, gadget will accept an + “eject” SCSI request (Start/Stop Unit). When it is sent, the + backing file will be closed to simulate ejection and the logical + unit will not be mountable by the host until a new backing file is + specified by userspace on the device (see “sysfs entries” + section). + + If a logical unit is not removable (the default), a backing file + must be specified for it with the “file” parameter as the module + is loaded. The same applies if the module is built in, no + exceptions. + + The default value of the flag is false, *HOWEVER* it used to be + true. This has been changed to better match File Storage Gadget + and because it seems like a saner default after all. Thus to + maintain compatibility with older kernels, it's best to specify + the default values. Also, if one relied on old default, explicit + “n” needs to be specified now. + + Note that “removable” means the logical unit's media can be + ejected or removed (as is true for a CD-ROM drive or a card + reader). It does *not* mean that the entire gadget can be + unplugged from the host; the proper term for that is + “hot-unpluggable”. + + - cdrom=b[,b...] + + This parameter specifies whether each logical unit should simulate + CD-ROM. The default is false. + + - ro=b[,b...] + + This parameter specifies whether each logical unit should be + reported as read only. This will prevent host from modifying the + backing files. + + Note that if this flag for given logical unit is false but the + backing file could not be opened in read/write mode, the gadget + will fall back to read only mode anyway. + + The default value for non-CD-ROM logical units is false; for + logical units simulating CD-ROM it is forced to true. + + - nofua=b[,b...] + + This parameter specifies whether FUA flag should be ignored in SCSI + Write10 and Write12 commands sent to given logical units. + + MS Windows mounts removable storage in “Removal optimised mode” by + default. All the writes to the media are synchronous, which is + achieved by setting the FUA (Force Unit Access) bit in SCSI + Write(10,12) commands. This forces each write to wait until the + data has actually been written out and prevents I/O requests + aggregation in block layer dramatically decreasing performance. + + Note that this may mean that if the device is powered from USB and + the user unplugs the device without unmounting it first (which at + least some Windows users do), the data may be lost. + + The default value is false. + + - luns=N + + This parameter specifies number of logical units the gadget will + have. It is limited by FSG_MAX_LUNS (8) and higher value will be + capped. + + If this parameter is provided, and the number of files specified + in “file” argument is greater then the value of “luns”, all excess + files will be ignored. + + If this parameter is not present, the number of logical units will + be deduced from the number of files specified in the “file” + parameter. If the file parameter is missing as well, one is + assumed. + + - stall=b + + Specifies whether the gadget is allowed to halt bulk endpoints. + The default is determined according to the type of USB device + controller, but usually true. + + In addition to the above, the gadget also accepts the following + parameters defined by the composite framework (they are common to + all composite gadgets so just a quick listing): + + - idVendor -- USB Vendor ID (16 bit integer) + - idProduct -- USB Product ID (16 bit integer) + - bcdDevice -- USB Device version (BCD) (16 bit integer) + - iManufacturer -- USB Manufacturer string (string) + - iProduct -- USB Product string (string) + - iSerialNumber -- SerialNumber string (sting) + +sysfs entries +============= + + For each logical unit, the gadget creates a directory in the sysfs + hierarchy. Inside of it the following three files are created: + + - file + + When read it returns the path to the backing file for the given + logical unit. If there is no backing file (possible only if the + logical unit is removable), the content is empty. + + When written into, it changes the backing file for given logical + unit. This change can be performed even if given logical unit is + not specified as removable (but that may look strange to the + host). It may fail, however, if host disallowed medium removal + with the Prevent-Allow Medium Removal SCSI command. + + - ro + + Reflects the state of ro flag for the given logical unit. It can + be read any time, and written to when there is no backing file + open for given logical unit. + + - nofua + + Reflects the state of nofua flag for given logical unit. It can + be read and written. + + Other then those, as usual, the values of module parameters can be + read from /sys/module/g_mass_storage/parameters/* files. + +Other gadgets using mass storage function +========================================= + + The Mass Storage Gadget uses the Mass Storage Function to handle + mass storage protocol. As a composite function, MSF may be used by + other gadgets as well (eg. g_multi and acm_ms). + + All of the information in previous sections are valid for other + gadgets using MSF, except that support for mass storage related + module parameters may be missing, or the parameters may have + a prefix. To figure out whether any of this is true one needs to + consult the gadget's documentation or its source code. + + For examples of how to include mass storage function in gadgets, one + may take a look at mass_storage.c, acm_ms.c and multi.c (sorted by + complexity). + +Relation to file storage gadget +=============================== + + The Mass Storage Function and thus the Mass Storage Gadget has been + based on the File Storage Gadget. The difference between the two is + that MSG is a composite gadget (ie. uses the composite framework) + while file storage gadget was a traditional gadget. From userspace + point of view this distinction does not really matter, but from + kernel hacker's point of view, this means that (i) MSG does not + duplicate code needed for handling basic USB protocol commands and + (ii) MSF can be used in any other composite gadget. + + Because of that, File Storage Gadget has been removed in Linux 3.8. + All users need to transition to the Mass Storage Gadget. The two + gadgets behave mostly the same from the outside except: + + 1. In FSG the “removable” and “cdrom” module parameters set the flag + for all logical units whereas in MSG they accept a list of y/n + values for each logical unit. If one uses only a single logical + unit this does not matter, but if there are more, the y/n value + needs to be repeated for each logical unit. + + 2. FSG's “serial”, “vendor”, “product” and “release” module + parameters are handled in MSG by the composite layer's parameters + named respectively: “iSerialnumber”, “idVendor”, “idProduct” and + “bcdDevice”. + + 3. MSG does not support FSG's test mode, thus “transport”, + “protocol” and “buflen” FSG's module parameters are not + supported. MSG always uses SCSI protocol with bulk only + transport mode and 16 KiB buffers. diff --git a/Documentation/usb/mass-storage.txt b/Documentation/usb/mass-storage.txt deleted file mode 100644 index d181b47c3cb6..000000000000 --- a/Documentation/usb/mass-storage.txt +++ /dev/null @@ -1,234 +0,0 @@ -========================= -Mass Storage Gadget (MSG) -========================= - -Overview -======== - - Mass Storage Gadget (or MSG) acts as a USB Mass Storage device, - appearing to the host as a disk or a CD-ROM drive. It supports - multiple logical units (LUNs). Backing storage for each LUN is - provided by a regular file or a block device, access can be limited - to read-only, and gadget can indicate that it is removable and/or - CD-ROM (the latter implies read-only access). - - Its requirements are modest; only a bulk-in and a bulk-out endpoint - are needed. The memory requirement amounts to two 16K buffers. - Support is included for full-speed, high-speed and SuperSpeed - operation. - - Note that the driver is slightly non-portable in that it assumes - a single memory/DMA buffer will be usable for bulk-in and bulk-out - endpoints. With most device controllers this is not an issue, but - there may be some with hardware restrictions that prevent a buffer - from being used by more than one endpoint. - - This document describes how to use the gadget from user space, its - relation to mass storage function (or MSF) and different gadgets - using it, and how it differs from File Storage Gadget (or FSG) - (which is no longer included in Linux). It will talk only briefly - about how to use MSF within composite gadgets. - -Module parameters -================= - - The mass storage gadget accepts the following mass storage specific - module parameters: - - - file=filename[,filename...] - - This parameter lists paths to files or block devices used for - backing storage for each logical unit. There may be at most - FSG_MAX_LUNS (8) LUNs set. If more files are specified, they will - be silently ignored. See also “luns” parameter. - - *BEWARE* that if a file is used as a backing storage, it may not - be modified by any other process. This is because the host - assumes the data does not change without its knowledge. It may be - read, but (if the logical unit is writable) due to buffering on - the host side, the contents are not well defined. - - The size of the logical unit will be rounded down to a full - logical block. The logical block size is 2048 bytes for LUNs - simulating CD-ROM, block size of the device if the backing file is - a block device, or 512 bytes otherwise. - - - removable=b[,b...] - - This parameter specifies whether each logical unit should be - removable. “b” here is either “y”, “Y” or “1” for true or “n”, - “N” or “0” for false. - - If this option is set for a logical unit, gadget will accept an - “eject” SCSI request (Start/Stop Unit). When it is sent, the - backing file will be closed to simulate ejection and the logical - unit will not be mountable by the host until a new backing file is - specified by userspace on the device (see “sysfs entries” - section). - - If a logical unit is not removable (the default), a backing file - must be specified for it with the “file” parameter as the module - is loaded. The same applies if the module is built in, no - exceptions. - - The default value of the flag is false, *HOWEVER* it used to be - true. This has been changed to better match File Storage Gadget - and because it seems like a saner default after all. Thus to - maintain compatibility with older kernels, it's best to specify - the default values. Also, if one relied on old default, explicit - “n” needs to be specified now. - - Note that “removable” means the logical unit's media can be - ejected or removed (as is true for a CD-ROM drive or a card - reader). It does *not* mean that the entire gadget can be - unplugged from the host; the proper term for that is - “hot-unpluggable”. - - - cdrom=b[,b...] - - This parameter specifies whether each logical unit should simulate - CD-ROM. The default is false. - - - ro=b[,b...] - - This parameter specifies whether each logical unit should be - reported as read only. This will prevent host from modifying the - backing files. - - Note that if this flag for given logical unit is false but the - backing file could not be opened in read/write mode, the gadget - will fall back to read only mode anyway. - - The default value for non-CD-ROM logical units is false; for - logical units simulating CD-ROM it is forced to true. - - - nofua=b[,b...] - - This parameter specifies whether FUA flag should be ignored in SCSI - Write10 and Write12 commands sent to given logical units. - - MS Windows mounts removable storage in “Removal optimised mode” by - default. All the writes to the media are synchronous, which is - achieved by setting the FUA (Force Unit Access) bit in SCSI - Write(10,12) commands. This forces each write to wait until the - data has actually been written out and prevents I/O requests - aggregation in block layer dramatically decreasing performance. - - Note that this may mean that if the device is powered from USB and - the user unplugs the device without unmounting it first (which at - least some Windows users do), the data may be lost. - - The default value is false. - - - luns=N - - This parameter specifies number of logical units the gadget will - have. It is limited by FSG_MAX_LUNS (8) and higher value will be - capped. - - If this parameter is provided, and the number of files specified - in “file” argument is greater then the value of “luns”, all excess - files will be ignored. - - If this parameter is not present, the number of logical units will - be deduced from the number of files specified in the “file” - parameter. If the file parameter is missing as well, one is - assumed. - - - stall=b - - Specifies whether the gadget is allowed to halt bulk endpoints. - The default is determined according to the type of USB device - controller, but usually true. - - In addition to the above, the gadget also accepts the following - parameters defined by the composite framework (they are common to - all composite gadgets so just a quick listing): - - - idVendor -- USB Vendor ID (16 bit integer) - - idProduct -- USB Product ID (16 bit integer) - - bcdDevice -- USB Device version (BCD) (16 bit integer) - - iManufacturer -- USB Manufacturer string (string) - - iProduct -- USB Product string (string) - - iSerialNumber -- SerialNumber string (sting) - -sysfs entries -============= - - For each logical unit, the gadget creates a directory in the sysfs - hierarchy. Inside of it the following three files are created: - - - file - - When read it returns the path to the backing file for the given - logical unit. If there is no backing file (possible only if the - logical unit is removable), the content is empty. - - When written into, it changes the backing file for given logical - unit. This change can be performed even if given logical unit is - not specified as removable (but that may look strange to the - host). It may fail, however, if host disallowed medium removal - with the Prevent-Allow Medium Removal SCSI command. - - - ro - - Reflects the state of ro flag for the given logical unit. It can - be read any time, and written to when there is no backing file - open for given logical unit. - - - nofua - - Reflects the state of nofua flag for given logical unit. It can - be read and written. - - Other then those, as usual, the values of module parameters can be - read from /sys/module/g_mass_storage/parameters/* files. - -Other gadgets using mass storage function -========================================= - - The Mass Storage Gadget uses the Mass Storage Function to handle - mass storage protocol. As a composite function, MSF may be used by - other gadgets as well (eg. g_multi and acm_ms). - - All of the information in previous sections are valid for other - gadgets using MSF, except that support for mass storage related - module parameters may be missing, or the parameters may have - a prefix. To figure out whether any of this is true one needs to - consult the gadget's documentation or its source code. - - For examples of how to include mass storage function in gadgets, one - may take a look at mass_storage.c, acm_ms.c and multi.c (sorted by - complexity). - -Relation to file storage gadget -=============================== - - The Mass Storage Function and thus the Mass Storage Gadget has been - based on the File Storage Gadget. The difference between the two is - that MSG is a composite gadget (ie. uses the composite framework) - while file storage gadget was a traditional gadget. From userspace - point of view this distinction does not really matter, but from - kernel hacker's point of view, this means that (i) MSG does not - duplicate code needed for handling basic USB protocol commands and - (ii) MSF can be used in any other composite gadget. - - Because of that, File Storage Gadget has been removed in Linux 3.8. - All users need to transition to the Mass Storage Gadget. The two - gadgets behave mostly the same from the outside except: - - 1. In FSG the “removable” and “cdrom” module parameters set the flag - for all logical units whereas in MSG they accept a list of y/n - values for each logical unit. If one uses only a single logical - unit this does not matter, but if there are more, the y/n value - needs to be repeated for each logical unit. - - 2. FSG's “serial”, “vendor”, “product” and “release” module - parameters are handled in MSG by the composite layer's parameters - named respectively: “iSerialnumber”, “idVendor”, “idProduct” and - “bcdDevice”. - - 3. MSG does not support FSG's test mode, thus “transport”, - “protocol” and “buflen” FSG's module parameters are not - supported. MSG always uses SCSI protocol with bulk only - transport mode and 16 KiB buffers. diff --git a/Documentation/usb/misc_usbsevseg.rst b/Documentation/usb/misc_usbsevseg.rst new file mode 100644 index 000000000000..6274aee083ed --- /dev/null +++ b/Documentation/usb/misc_usbsevseg.rst @@ -0,0 +1,51 @@ +============================= +USB 7-Segment Numeric Display +============================= + +Manufactured by Delcom Engineering + +Device Information +------------------ +USB VENDOR_ID 0x0fc5 +USB PRODUCT_ID 0x1227 +Both the 6 character and 8 character displays have PRODUCT_ID, +and according to Delcom Engineering no queryable information +can be obtained from the device to tell them apart. + +Device Modes +------------ +By default, the driver assumes the display is only 6 characters +The mode for 6 characters is: + + MSB 0x06; LSB 0x3f + +For the 8 character display: + + MSB 0x08; LSB 0xff + +The device can accept "text" either in raw, hex, or ascii textmode. +raw controls each segment manually, +hex expects a value between 0-15 per character, +ascii expects a value between '0'-'9' and 'A'-'F'. +The default is ascii. + +Device Operation +---------------- +1. Turn on the device: + echo 1 > /sys/bus/usb/.../powered +2. Set the device's mode: + echo $mode_msb > /sys/bus/usb/.../mode_msb + echo $mode_lsb > /sys/bus/usb/.../mode_lsb +3. Set the textmode: + echo $textmode > /sys/bus/usb/.../textmode +4. set the text (for example): + echo "123ABC" > /sys/bus/usb/.../text (ascii) + echo "A1B2" > /sys/bus/usb/.../text (ascii) + echo -ne "\x01\x02\x03" > /sys/bus/usb/.../text (hex) +5. Set the decimal places. + The device has either 6 or 8 decimal points. + to set the nth decimal place calculate 10 ** n + and echo it in to /sys/bus/usb/.../decimals + To set multiple decimals points sum up each power. + For example, to set the 0th and 3rd decimal place + echo 1001 > /sys/bus/usb/.../decimals diff --git a/Documentation/usb/misc_usbsevseg.txt b/Documentation/usb/misc_usbsevseg.txt deleted file mode 100644 index 6274aee083ed..000000000000 --- a/Documentation/usb/misc_usbsevseg.txt +++ /dev/null @@ -1,51 +0,0 @@ -============================= -USB 7-Segment Numeric Display -============================= - -Manufactured by Delcom Engineering - -Device Information ------------------- -USB VENDOR_ID 0x0fc5 -USB PRODUCT_ID 0x1227 -Both the 6 character and 8 character displays have PRODUCT_ID, -and according to Delcom Engineering no queryable information -can be obtained from the device to tell them apart. - -Device Modes ------------- -By default, the driver assumes the display is only 6 characters -The mode for 6 characters is: - - MSB 0x06; LSB 0x3f - -For the 8 character display: - - MSB 0x08; LSB 0xff - -The device can accept "text" either in raw, hex, or ascii textmode. -raw controls each segment manually, -hex expects a value between 0-15 per character, -ascii expects a value between '0'-'9' and 'A'-'F'. -The default is ascii. - -Device Operation ----------------- -1. Turn on the device: - echo 1 > /sys/bus/usb/.../powered -2. Set the device's mode: - echo $mode_msb > /sys/bus/usb/.../mode_msb - echo $mode_lsb > /sys/bus/usb/.../mode_lsb -3. Set the textmode: - echo $textmode > /sys/bus/usb/.../textmode -4. set the text (for example): - echo "123ABC" > /sys/bus/usb/.../text (ascii) - echo "A1B2" > /sys/bus/usb/.../text (ascii) - echo -ne "\x01\x02\x03" > /sys/bus/usb/.../text (hex) -5. Set the decimal places. - The device has either 6 or 8 decimal points. - to set the nth decimal place calculate 10 ** n - and echo it in to /sys/bus/usb/.../decimals - To set multiple decimals points sum up each power. - For example, to set the 0th and 3rd decimal place - echo 1001 > /sys/bus/usb/.../decimals diff --git a/Documentation/usb/mtouchusb.rst b/Documentation/usb/mtouchusb.rst new file mode 100644 index 000000000000..d1111b74bf75 --- /dev/null +++ b/Documentation/usb/mtouchusb.rst @@ -0,0 +1,84 @@ +================ +mtouchusb driver +================ + +Changes +======= + +- 0.3 - Created based off of scanner & INSTALL from the original touchscreen + driver on freecode (http://freecode.com/projects/3mtouchscreendriver) +- Amended for linux-2.4.18, then 2.4.19 + +- 0.5 - Complete rewrite using Linux Input in 2.6.3 + Unfortunately no calibration support at this time + +- 1.4 - Multiple changes to support the EXII 5000UC and house cleaning + Changed reset from standard USB dev reset to vendor reset + Changed data sent to host from compensated to raw coordinates + Eliminated vendor/product module params + Performed multiple successful tests with an EXII-5010UC + +Supported Hardware +================== + +:: + + All controllers have the Vendor: 0x0596 & Product: 0x0001 + + + Controller Description Part Number + ------------------------------------------------------ + + USB Capacitive - Pearl Case 14-205 (Discontinued) + USB Capacitive - Black Case 14-124 (Discontinued) + USB Capacitive - No Case 14-206 (Discontinued) + + USB Capacitive - Pearl Case EXII-5010UC + USB Capacitive - Black Case EXII-5030UC + USB Capacitive - No Case EXII-5050UC + +Driver Notes +============ + +Installation is simple, you only need to add Linux Input, Linux USB, and the +driver to the kernel. The driver can also be optionally built as a module. + +This driver appears to be one of possible 2 Linux USB Input Touchscreen +drivers. Although 3M produces a binary only driver available for +download, I persist in updating this driver since I would like to use the +touchscreen for embedded apps using QTEmbedded, DirectFB, etc. So I feel the +logical choice is to use Linux Input. + +Currently there is no way to calibrate the device via this driver. Even if +the device could be calibrated, the driver pulls to raw coordinate data from +the controller. This means calibration must be performed within the +userspace. + +The controller screen resolution is now 0 to 16384 for both X and Y reporting +the raw touch data. This is the same for the old and new capacitive USB +controllers. + +Perhaps at some point an abstract function will be placed into evdev so +generic functions like calibrations, resets, and vendor information can be +requested from the userspace (And the drivers would handle the vendor specific +tasks). + +TODO +==== + +Implement a control urb again to handle requests to and from the device +such as calibration, etc once/if it becomes available. + +Disclaimer +========== + +I am not a MicroTouch/3M employee, nor have I ever been. 3M does not support +this driver! If you want touch drivers only supported within X, please go to: + +http://www.3m.com/3MTouchSystems/ + +Thanks +====== + +A huge thank you to 3M Touch Systems for the EXII-5010UC controllers for +testing! diff --git a/Documentation/usb/mtouchusb.txt b/Documentation/usb/mtouchusb.txt deleted file mode 100644 index d1111b74bf75..000000000000 --- a/Documentation/usb/mtouchusb.txt +++ /dev/null @@ -1,84 +0,0 @@ -================ -mtouchusb driver -================ - -Changes -======= - -- 0.3 - Created based off of scanner & INSTALL from the original touchscreen - driver on freecode (http://freecode.com/projects/3mtouchscreendriver) -- Amended for linux-2.4.18, then 2.4.19 - -- 0.5 - Complete rewrite using Linux Input in 2.6.3 - Unfortunately no calibration support at this time - -- 1.4 - Multiple changes to support the EXII 5000UC and house cleaning - Changed reset from standard USB dev reset to vendor reset - Changed data sent to host from compensated to raw coordinates - Eliminated vendor/product module params - Performed multiple successful tests with an EXII-5010UC - -Supported Hardware -================== - -:: - - All controllers have the Vendor: 0x0596 & Product: 0x0001 - - - Controller Description Part Number - ------------------------------------------------------ - - USB Capacitive - Pearl Case 14-205 (Discontinued) - USB Capacitive - Black Case 14-124 (Discontinued) - USB Capacitive - No Case 14-206 (Discontinued) - - USB Capacitive - Pearl Case EXII-5010UC - USB Capacitive - Black Case EXII-5030UC - USB Capacitive - No Case EXII-5050UC - -Driver Notes -============ - -Installation is simple, you only need to add Linux Input, Linux USB, and the -driver to the kernel. The driver can also be optionally built as a module. - -This driver appears to be one of possible 2 Linux USB Input Touchscreen -drivers. Although 3M produces a binary only driver available for -download, I persist in updating this driver since I would like to use the -touchscreen for embedded apps using QTEmbedded, DirectFB, etc. So I feel the -logical choice is to use Linux Input. - -Currently there is no way to calibrate the device via this driver. Even if -the device could be calibrated, the driver pulls to raw coordinate data from -the controller. This means calibration must be performed within the -userspace. - -The controller screen resolution is now 0 to 16384 for both X and Y reporting -the raw touch data. This is the same for the old and new capacitive USB -controllers. - -Perhaps at some point an abstract function will be placed into evdev so -generic functions like calibrations, resets, and vendor information can be -requested from the userspace (And the drivers would handle the vendor specific -tasks). - -TODO -==== - -Implement a control urb again to handle requests to and from the device -such as calibration, etc once/if it becomes available. - -Disclaimer -========== - -I am not a MicroTouch/3M employee, nor have I ever been. 3M does not support -this driver! If you want touch drivers only supported within X, please go to: - -http://www.3m.com/3MTouchSystems/ - -Thanks -====== - -A huge thank you to 3M Touch Systems for the EXII-5010UC controllers for -testing! diff --git a/Documentation/usb/ohci.rst b/Documentation/usb/ohci.rst new file mode 100644 index 000000000000..bb3c49719e6b --- /dev/null +++ b/Documentation/usb/ohci.rst @@ -0,0 +1,35 @@ +==== +OHCI +==== + +23-Aug-2002 + +The "ohci-hcd" driver is a USB Host Controller Driver (HCD) that is derived +from the "usb-ohci" driver from the 2.4 kernel series. The "usb-ohci" code +was written primarily by Roman Weissgaerber but with +contributions from many others (read its copyright/licencing header). + +It supports the "Open Host Controller Interface" (OHCI), which standardizes +hardware register protocols used to talk to USB 1.1 host controllers. As +compared to the earlier "Universal Host Controller Interface" (UHCI) from +Intel, it pushes more intelligence into the hardware. USB 1.1 controllers +from vendors other than Intel and VIA generally use OHCI. + +Changes since the 2.4 kernel include + + - improved robustness; bugfixes; and less overhead + - supports the updated and simplified usbcore APIs + - interrupt transfers can be larger, and can be queued + - less code, by using the upper level "hcd" framework + - supports some non-PCI implementations of OHCI + - ... more + +The "ohci-hcd" driver handles all USB 1.1 transfer types. Transfers of all +types can be queued. That was also true in "usb-ohci", except for interrupt +transfers. Previously, using periods of one frame would risk data loss due +to overhead in IRQ processing. When interrupt transfers are queued, those +risks can be minimized by making sure the hardware always has transfers to +work on while the OS is getting around to the relevant IRQ processing. + +- David Brownell + diff --git a/Documentation/usb/ohci.txt b/Documentation/usb/ohci.txt deleted file mode 100644 index bb3c49719e6b..000000000000 --- a/Documentation/usb/ohci.txt +++ /dev/null @@ -1,35 +0,0 @@ -==== -OHCI -==== - -23-Aug-2002 - -The "ohci-hcd" driver is a USB Host Controller Driver (HCD) that is derived -from the "usb-ohci" driver from the 2.4 kernel series. The "usb-ohci" code -was written primarily by Roman Weissgaerber but with -contributions from many others (read its copyright/licencing header). - -It supports the "Open Host Controller Interface" (OHCI), which standardizes -hardware register protocols used to talk to USB 1.1 host controllers. As -compared to the earlier "Universal Host Controller Interface" (UHCI) from -Intel, it pushes more intelligence into the hardware. USB 1.1 controllers -from vendors other than Intel and VIA generally use OHCI. - -Changes since the 2.4 kernel include - - - improved robustness; bugfixes; and less overhead - - supports the updated and simplified usbcore APIs - - interrupt transfers can be larger, and can be queued - - less code, by using the upper level "hcd" framework - - supports some non-PCI implementations of OHCI - - ... more - -The "ohci-hcd" driver handles all USB 1.1 transfer types. Transfers of all -types can be queued. That was also true in "usb-ohci", except for interrupt -transfers. Previously, using periods of one frame would risk data loss due -to overhead in IRQ processing. When interrupt transfers are queued, those -risks can be minimized by making sure the hardware always has transfers to -work on while the OS is getting around to the relevant IRQ processing. - -- David Brownell - diff --git a/Documentation/usb/rio.rst b/Documentation/usb/rio.rst new file mode 100644 index 000000000000..ea73475471db --- /dev/null +++ b/Documentation/usb/rio.rst @@ -0,0 +1,109 @@ +============ +Diamonds Rio +============ + +Copyright (C) 1999, 2000 Bruce Tenison + +Portions Copyright (C) 1999, 2000 David Nelson + +Thanks to David Nelson for guidance and the usage of the scanner.txt +and scanner.c files to model our driver and this informative file. + +Mar. 2, 2000 + +Changes +======= + +- Initial Revision + + +Overview +======== + +This README will address issues regarding how to configure the kernel +to access a RIO 500 mp3 player. +Before I explain how to use this to access the Rio500 please be warned: + +.. warning:: + + Please note that this software is still under development. The authors + are in no way responsible for any damage that may occur, no matter how + inconsequential. + +It seems that the Rio has a problem when sending .mp3 with low batteries. +I suggest when the batteries are low and you want to transfer stuff that you +replace it with a fresh one. In my case, what happened is I lost two 16kb +blocks (they are no longer usable to store information to it). But I don't +know if that's normal or not; it could simply be a problem with the flash +memory. + +In an extreme case, I left my Rio playing overnight and the batteries wore +down to nothing and appear to have corrupted the flash memory. My RIO +needed to be replaced as a result. Diamond tech support is aware of the +problem. Do NOT allow your batteries to wear down to nothing before +changing them. It appears RIO 500 firmware does not handle low battery +power well at all. + +On systems with OHCI controllers, the kernel OHCI code appears to have +power on problems with some chipsets. If you are having problems +connecting to your RIO 500, try turning it on first and then plugging it +into the USB cable. + +Contact Information +------------------- + + The main page for the project is hosted at sourceforge.net in the following + URL: . You can also go to the project's + sourceforge home page at: . + There is also a mailing list: rio500-users@lists.sourceforge.net + +Authors +------- + +Most of the code was written by Cesar Miquel . Keith +Clayton is incharge of the PPC port and making sure +things work there. Bruce Tenison is adding support +for .fon files and also does testing. The program will mostly sure be +re-written and Pete Ikusz along with the rest will re-design it. I would +also like to thank Tri Nguyen who provided use +with some important information regarding the communication with the Rio. + +Additional Information and userspace tools + + http://rio500.sourceforge.net/ + + +Requirements +============ + +A host with a USB port running a Linux kernel with RIO 500 support enabled. + +The driver is a module called rio500, which should be automatically loaded +as you plug in your device. If that fails you can manually load it with + + modprobe rio500 + +Udev should automatically create a device node as soon as plug in your device. +If that fails, you can manually add a device for the USB rio500:: + + mknod /dev/usb/rio500 c 180 64 + +In that case, set appropriate permissions for /dev/usb/rio500 (don't forget +about group and world permissions). Both read and write permissions are +required for proper operation. + +That's it. The Rio500 Utils at: http://rio500.sourceforge.net should +be able to access the rio500. + +Limits +====== + +You can use only a single rio500 device at a time with your computer. + +Bugs +==== + +If you encounter any problems feel free to drop me an email. + +Bruce Tenison +btenison@dibbs.net diff --git a/Documentation/usb/rio.txt b/Documentation/usb/rio.txt deleted file mode 100644 index ea73475471db..000000000000 --- a/Documentation/usb/rio.txt +++ /dev/null @@ -1,109 +0,0 @@ -============ -Diamonds Rio -============ - -Copyright (C) 1999, 2000 Bruce Tenison - -Portions Copyright (C) 1999, 2000 David Nelson - -Thanks to David Nelson for guidance and the usage of the scanner.txt -and scanner.c files to model our driver and this informative file. - -Mar. 2, 2000 - -Changes -======= - -- Initial Revision - - -Overview -======== - -This README will address issues regarding how to configure the kernel -to access a RIO 500 mp3 player. -Before I explain how to use this to access the Rio500 please be warned: - -.. warning:: - - Please note that this software is still under development. The authors - are in no way responsible for any damage that may occur, no matter how - inconsequential. - -It seems that the Rio has a problem when sending .mp3 with low batteries. -I suggest when the batteries are low and you want to transfer stuff that you -replace it with a fresh one. In my case, what happened is I lost two 16kb -blocks (they are no longer usable to store information to it). But I don't -know if that's normal or not; it could simply be a problem with the flash -memory. - -In an extreme case, I left my Rio playing overnight and the batteries wore -down to nothing and appear to have corrupted the flash memory. My RIO -needed to be replaced as a result. Diamond tech support is aware of the -problem. Do NOT allow your batteries to wear down to nothing before -changing them. It appears RIO 500 firmware does not handle low battery -power well at all. - -On systems with OHCI controllers, the kernel OHCI code appears to have -power on problems with some chipsets. If you are having problems -connecting to your RIO 500, try turning it on first and then plugging it -into the USB cable. - -Contact Information -------------------- - - The main page for the project is hosted at sourceforge.net in the following - URL: . You can also go to the project's - sourceforge home page at: . - There is also a mailing list: rio500-users@lists.sourceforge.net - -Authors -------- - -Most of the code was written by Cesar Miquel . Keith -Clayton is incharge of the PPC port and making sure -things work there. Bruce Tenison is adding support -for .fon files and also does testing. The program will mostly sure be -re-written and Pete Ikusz along with the rest will re-design it. I would -also like to thank Tri Nguyen who provided use -with some important information regarding the communication with the Rio. - -Additional Information and userspace tools - - http://rio500.sourceforge.net/ - - -Requirements -============ - -A host with a USB port running a Linux kernel with RIO 500 support enabled. - -The driver is a module called rio500, which should be automatically loaded -as you plug in your device. If that fails you can manually load it with - - modprobe rio500 - -Udev should automatically create a device node as soon as plug in your device. -If that fails, you can manually add a device for the USB rio500:: - - mknod /dev/usb/rio500 c 180 64 - -In that case, set appropriate permissions for /dev/usb/rio500 (don't forget -about group and world permissions). Both read and write permissions are -required for proper operation. - -That's it. The Rio500 Utils at: http://rio500.sourceforge.net should -be able to access the rio500. - -Limits -====== - -You can use only a single rio500 device at a time with your computer. - -Bugs -==== - -If you encounter any problems feel free to drop me an email. - -Bruce Tenison -btenison@dibbs.net diff --git a/Documentation/usb/text_files.rst b/Documentation/usb/text_files.rst new file mode 100644 index 000000000000..6a8d3fcf64b6 --- /dev/null +++ b/Documentation/usb/text_files.rst @@ -0,0 +1,29 @@ +Linux CDC ACM inf +----------------- + +.. include:: linux-cdc-acm.inf + :literal: + +Linux inf +--------- + +.. include:: linux.inf + :literal: + +USB devfs drop permissions source +--------------------------------- + +.. literalinclude:: usbdevfs-drop-permissions.c + :language: c + +WUSB command line script to manipulate auth credentials +------------------------------------------------------- + +.. literalinclude:: wusb-cbaf + :language: shell + +Credits +------- + +.. include:: CREDITS + :literal: diff --git a/Documentation/usb/usb-help.rst b/Documentation/usb/usb-help.rst new file mode 100644 index 000000000000..dc23ecd4d802 --- /dev/null +++ b/Documentation/usb/usb-help.rst @@ -0,0 +1,17 @@ +============== +USB references +============== + +2008-Mar-7 + +For USB help other than the readme files that are located in +`Documentation/usb/*`, see the following: + +- Linux-USB project: http://www.linux-usb.org + mirrors at http://usb.in.tum.de/linux-usb/ + and http://it.linux-usb.org +- Linux USB Guide: http://linux-usb.sourceforge.net +- Linux-USB device overview (working devices and drivers): + http://www.qbik.ch/usb/devices/ + +The Linux-USB mailing list is at linux-usb@vger.kernel.org diff --git a/Documentation/usb/usb-help.txt b/Documentation/usb/usb-help.txt deleted file mode 100644 index dc23ecd4d802..000000000000 --- a/Documentation/usb/usb-help.txt +++ /dev/null @@ -1,17 +0,0 @@ -============== -USB references -============== - -2008-Mar-7 - -For USB help other than the readme files that are located in -`Documentation/usb/*`, see the following: - -- Linux-USB project: http://www.linux-usb.org - mirrors at http://usb.in.tum.de/linux-usb/ - and http://it.linux-usb.org -- Linux USB Guide: http://linux-usb.sourceforge.net -- Linux-USB device overview (working devices and drivers): - http://www.qbik.ch/usb/devices/ - -The Linux-USB mailing list is at linux-usb@vger.kernel.org diff --git a/Documentation/usb/usb-serial.rst b/Documentation/usb/usb-serial.rst new file mode 100644 index 000000000000..8fa7dbd3da9a --- /dev/null +++ b/Documentation/usb/usb-serial.rst @@ -0,0 +1,537 @@ +========== +USB serial +========== + +Introduction +============ + + The USB serial driver currently supports a number of different USB to + serial converter products, as well as some devices that use a serial + interface from userspace to talk to the device. + + See the individual product section below for specific information about + the different devices. + + +Configuration +============= + + Currently the driver can handle up to 256 different serial interfaces at + one time. + + The major number that the driver uses is 188 so to use the driver, + create the following nodes:: + + mknod /dev/ttyUSB0 c 188 0 + mknod /dev/ttyUSB1 c 188 1 + mknod /dev/ttyUSB2 c 188 2 + mknod /dev/ttyUSB3 c 188 3 + . + . + . + mknod /dev/ttyUSB254 c 188 254 + mknod /dev/ttyUSB255 c 188 255 + + When the device is connected and recognized by the driver, the driver + will print to the system log, which node(s) the device has been bound + to. + + +Specific Devices Supported +========================== + + +ConnectTech WhiteHEAT 4 port converter +-------------------------------------- + + ConnectTech has been very forthcoming with information about their + device, including providing a unit to test with. + + The driver is officially supported by Connect Tech Inc. + http://www.connecttech.com + + For any questions or problems with this driver, please contact + Connect Tech's Support Department at support@connecttech.com + + +HandSpring Visor, Palm USB, and Clié USB driver +----------------------------------------------- + + This driver works with all HandSpring USB, Palm USB, and Sony Clié USB + devices. + + Only when the device tries to connect to the host, will the device show + up to the host as a valid USB device. When this happens, the device is + properly enumerated, assigned a port, and then communication _should_ be + possible. The driver cleans up properly when the device is removed, or + the connection is canceled on the device. + + NOTE: + This means that in order to talk to the device, the sync button must be + pressed BEFORE trying to get any program to communicate to the device. + This goes against the current documentation for pilot-xfer and other + packages, but is the only way that it will work due to the hardware + in the device. + + When the device is connected, try talking to it on the second port + (this is usually /dev/ttyUSB1 if you do not have any other usb-serial + devices in the system.) The system log should tell you which port is + the port to use for the HotSync transfer. The "Generic" port can be used + for other device communication, such as a PPP link. + + For some Sony Clié devices, /dev/ttyUSB0 must be used to talk to the + device. This is true for all OS version 3.5 devices, and most devices + that have had a flash upgrade to a newer version of the OS. See the + kernel system log for information on which is the correct port to use. + + If after pressing the sync button, nothing shows up in the system log, + try resetting the device, first a hot reset, and then a cold reset if + necessary. Some devices need this before they can talk to the USB port + properly. + + Devices that are not compiled into the kernel can be specified with module + parameters. e.g. modprobe visor vendor=0x54c product=0x66 + + There is a webpage and mailing lists for this portion of the driver at: + http://sourceforge.net/projects/usbvisor/ + + For any questions or problems with this driver, please contact Greg + Kroah-Hartman at greg@kroah.com + + +PocketPC PDA Driver +------------------- + + This driver can be used to connect to Compaq iPAQ, HP Jornada, Casio EM500 + and other PDAs running Windows CE 3.0 or PocketPC 2002 using a USB + cable/cradle. + Most devices supported by ActiveSync are supported out of the box. + For others, please use module parameters to specify the product and vendor + id. e.g. modprobe ipaq vendor=0x3f0 product=0x1125 + + The driver presents a serial interface (usually on /dev/ttyUSB0) over + which one may run ppp and establish a TCP/IP link to the PDA. Once this + is done, you can transfer files, backup, download email etc. The most + significant advantage of using USB is speed - I can get 73 to 113 + kbytes/sec for download/upload to my iPAQ. + + This driver is only one of a set of components required to utilize + the USB connection. Please visit http://synce.sourceforge.net which + contains the necessary packages and a simple step-by-step howto. + + Once connected, you can use Win CE programs like ftpView, Pocket Outlook + from the PDA and xcerdisp, synce utilities from the Linux side. + + To use Pocket IE, follow the instructions given at + http://www.tekguru.co.uk/EM500/usbtonet.htm to achieve the same thing + on Win98. Omit the proxy server part; Linux is quite capable of forwarding + packets unlike Win98. Another modification is required at least for the + iPAQ - disable autosync by going to the Start/Settings/Connections menu + and unchecking the "Automatically synchronize ..." box. Go to + Start/Programs/Connections, connect the cable and select "usbdial" (or + whatever you named your new USB connection). You should finally wind + up with a "Connected to usbdial" window with status shown as connected. + Now start up PIE and browse away. + + If it doesn't work for some reason, load both the usbserial and ipaq module + with the module parameter "debug" set to 1 and examine the system log. + You can also try soft-resetting your PDA before attempting a connection. + + Other functionality may be possible depending on your PDA. According to + Wes Cilldhaire , with the Toshiba E570, + ...if you boot into the bootloader (hold down the power when hitting the + reset button, continuing to hold onto the power until the bootloader screen + is displayed), then put it in the cradle with the ipaq driver loaded, open + a terminal on /dev/ttyUSB0, it gives you a "USB Reflash" terminal, which can + be used to flash the ROM, as well as the microP code.. so much for needing + Toshiba's $350 serial cable for flashing!! :D + NOTE: This has NOT been tested. Use at your own risk. + + For any questions or problems with the driver, please contact Ganesh + Varadarajan + + +Keyspan PDA Serial Adapter +-------------------------- + + Single port DB-9 serial adapter, pushed as a PDA adapter for iMacs (mostly + sold in Macintosh catalogs, comes in a translucent white/green dongle). + Fairly simple device. Firmware is homebrew. + This driver also works for the Xircom/Entrega single port serial adapter. + + Current status: + + Things that work: + - basic input/output (tested with 'cu') + - blocking write when serial line can't keep up + - changing baud rates (up to 115200) + - getting/setting modem control pins (TIOCM{GET,SET,BIS,BIC}) + - sending break (although duration looks suspect) + + Things that don't: + - device strings (as logged by kernel) have trailing binary garbage + - device ID isn't right, might collide with other Keyspan products + - changing baud rates ought to flush tx/rx to avoid mangled half characters + + Big Things on the todo list: + - parity, 7 vs 8 bits per char, 1 or 2 stop bits + - HW flow control + - not all of the standard USB descriptors are handled: + Get_Status, Set_Feature, O_NONBLOCK, select() + + For any questions or problems with this driver, please contact Brian + Warner at warner@lothar.com + + +Keyspan USA-series Serial Adapters +---------------------------------- + + Single, Dual and Quad port adapters - driver uses Keyspan supplied + firmware and is being developed with their support. + + Current status: + + The USA-18X, USA-28X, USA-19, USA-19W and USA-49W are supported and + have been pretty thoroughly tested at various baud rates with 8-N-1 + character settings. Other character lengths and parity setups are + presently untested. + + The USA-28 isn't yet supported though doing so should be pretty + straightforward. Contact the maintainer if you require this + functionality. + + More information is available at: + + http://www.carnationsoftware.com/carnation/Keyspan.html + + For any questions or problems with this driver, please contact Hugh + Blemings at hugh@misc.nu + + +FTDI Single Port Serial Driver +------------------------------ + + This is a single port DB-25 serial adapter. + + Devices supported include: + + - TripNav TN-200 USB GPS + - Navis Engineering Bureau CH-4711 USB GPS + + For any questions or problems with this driver, please contact Bill Ryder. + + +ZyXEL omni.net lcd plus ISDN TA +------------------------------- + + This is an ISDN TA. Please report both successes and troubles to + azummo@towertech.it + + +Cypress M8 CY4601 Family Serial Driver +-------------------------------------- + + This driver was in most part developed by Neil "koyama" Whelchel. It + has been improved since that previous form to support dynamic serial + line settings and improved line handling. The driver is for the most + part stable and has been tested on an smp machine. (dual p2) + + Chipsets supported under CY4601 family: + + CY7C63723, CY7C63742, CY7C63743, CY7C64013 + + Devices supported: + + - DeLorme's USB Earthmate GPS (SiRF Star II lp arch) + - Cypress HID->COM RS232 adapter + + Note: + Cypress Semiconductor claims no affiliation with the + hid->com device. + + Most devices using chipsets under the CY4601 family should + work with the driver. As long as they stay true to the CY4601 + usbserial specification. + + Technical notes: + + The Earthmate starts out at 4800 8N1 by default... the driver will + upon start init to this setting. usbserial core provides the rest + of the termios settings, along with some custom termios so that the + output is in proper format and parsable. + + The device can be put into sirf mode by issuing NMEA command:: + + $PSRF100,,,,,*CHECKSUM + $PSRF100,0,9600,8,1,0*0C + + It should then be sufficient to change the port termios to match this + to begin communicating. + + As far as I can tell it supports pretty much every sirf command as + documented online available with firmware 2.31, with some unknown + message ids. + + The hid->com adapter can run at a maximum baud of 115200bps. Please note + that the device has trouble or is incapable of raising line voltage properly. + It will be fine with null modem links, as long as you do not try to link two + together without hacking the adapter to set the line high. + + The driver is smp safe. Performance with the driver is rather low when using + it for transferring files. This is being worked on, but I would be willing to + accept patches. An urb queue or packet buffer would likely fit the bill here. + + If you have any questions, problems, patches, feature requests, etc. you can + contact me here via email: + + dignome@gmail.com + + (your problems/patches can alternately be submitted to usb-devel) + + +Digi AccelePort Driver +---------------------- + + This driver supports the Digi AccelePort USB 2 and 4 devices, 2 port + (plus a parallel port) and 4 port USB serial converters. The driver + does NOT yet support the Digi AccelePort USB 8. + + This driver works under SMP with the usb-uhci driver. It does not + work under SMP with the uhci driver. + + The driver is generally working, though we still have a few more ioctls + to implement and final testing and debugging to do. The parallel port + on the USB 2 is supported as a serial to parallel converter; in other + words, it appears as another USB serial port on Linux, even though + physically it is really a parallel port. The Digi Acceleport USB 8 + is not yet supported. + + Please contact Peter Berger (pberger@brimson.com) or Al Borchers + (alborchers@steinerpoint.com) for questions or problems with this + driver. + + +Belkin USB Serial Adapter F5U103 +-------------------------------- + + Single port DB-9/PS-2 serial adapter from Belkin with firmware by eTEK Labs. + The Peracom single port serial adapter also works with this driver, as + well as the GoHubs adapter. + + Current status: + + The following have been tested and work: + + - Baud rate 300-230400 + - Data bits 5-8 + - Stop bits 1-2 + - Parity N,E,O,M,S + - Handshake None, Software (XON/XOFF), Hardware (CTSRTS,CTSDTR) [1]_ + - Break Set and clear + - Line control Input/Output query and control [2]_ + + .. [1] + Hardware input flow control is only enabled for firmware + levels above 2.06. Read source code comments describing Belkin + firmware errata. Hardware output flow control is working for all + firmware versions. + + .. [2] + Queries of inputs (CTS,DSR,CD,RI) show the last + reported state. Queries of outputs (DTR,RTS) show the last + requested state and may not reflect current state as set by + automatic hardware flow control. + + TO DO List: + - Add true modem control line query capability. Currently tracks the + states reported by the interrupt and the states requested. + - Add error reporting back to application for UART error conditions. + - Add support for flush ioctls. + - Add everything else that is missing :) + + For any questions or problems with this driver, please contact William + Greathouse at wgreathouse@smva.com + + +Empeg empeg-car Mark I/II Driver +-------------------------------- + + This is an experimental driver to provide connectivity support for the + client synchronization tools for an Empeg empeg-car mp3 player. + + Tips: + * Don't forget to create the device nodes for ttyUSB{0,1,2,...} + * modprobe empeg (modprobe is your friend) + * emptool --usb /dev/ttyUSB0 (or whatever you named your device node) + + For any questions or problems with this driver, please contact Gary + Brubaker at xavyer@ix.netcom.com + + +MCT USB Single Port Serial Adapter U232 +--------------------------------------- + + This driver is for the MCT USB-RS232 Converter (25 pin, Model No. + U232-P25) from Magic Control Technology Corp. (there is also a 9 pin + Model No. U232-P9). More information about this device can be found at + the manufacturer's web-site: http://www.mct.com.tw. + + The driver is generally working, though it still needs some more testing. + It is derived from the Belkin USB Serial Adapter F5U103 driver and its + TODO list is valid for this driver as well. + + This driver has also been found to work for other products, which have + the same Vendor ID but different Product IDs. Sitecom's U232-P25 serial + converter uses Product ID 0x230 and Vendor ID 0x711 and works with this + driver. Also, D-Link's DU-H3SP USB BAY also works with this driver. + + For any questions or problems with this driver, please contact Wolfgang + Grandegger at wolfgang@ces.ch + + +Inside Out Networks Edgeport Driver +----------------------------------- + + This driver supports all devices made by Inside Out Networks, specifically + the following models: + + - Edgeport/4 + - Rapidport/4 + - Edgeport/4t + - Edgeport/2 + - Edgeport/4i + - Edgeport/2i + - Edgeport/421 + - Edgeport/21 + - Edgeport/8 + - Edgeport/8 Dual + - Edgeport/2D8 + - Edgeport/4D8 + - Edgeport/8i + - Edgeport/2 DIN + - Edgeport/4 DIN + - Edgeport/16 Dual + + For any questions or problems with this driver, please contact Greg + Kroah-Hartman at greg@kroah.com + + +REINER SCT cyberJack pinpad/e-com USB chipcard reader +----------------------------------------------------- + + Interface to ISO 7816 compatible contactbased chipcards, e.g. GSM SIMs. + + Current status: + + This is the kernel part of the driver for this USB card reader. + There is also a user part for a CT-API driver available. A site + for downloading is TBA. For now, you can request it from the + maintainer (linux-usb@sii.li). + + For any questions or problems with this driver, please contact + linux-usb@sii.li + + +Prolific PL2303 Driver +---------------------- + + This driver supports any device that has the PL2303 chip from Prolific + in it. This includes a number of single port USB to serial converters, + more than 70% of USB GPS devices (in 2010), and some USB UPSes. Devices + from Aten (the UC-232) and IO-Data work with this driver, as does + the DCU-11 mobile-phone cable. + + For any questions or problems with this driver, please contact Greg + Kroah-Hartman at greg@kroah.com + + +KL5KUSB105 chipset / PalmConnect USB single-port adapter +-------------------------------------------------------- + +Current status: + + The driver was put together by looking at the usb bus transactions + done by Palm's driver under Windows, so a lot of functionality is + still missing. Notably, serial ioctls are sometimes faked or not yet + implemented. Support for finding out about DSR and CTS line status is + however implemented (though not nicely), so your favorite autopilot(1) + and pilot-manager -daemon calls will work. Baud rates up to 115200 + are supported, but handshaking (software or hardware) is not, which is + why it is wise to cut down on the rate used is wise for large + transfers until this is settled. + + See http://www.uuhaus.de/linux/palmconnect.html for up-to-date + information on this driver. + +Winchiphead CH341 Driver +------------------------ + + This driver is for the Winchiphead CH341 USB-RS232 Converter. This chip + also implements an IEEE 1284 parallel port, I2C and SPI, but that is not + supported by the driver. The protocol was analyzed from the behaviour + of the Windows driver, no datasheet is available at present. + + The manufacturer's website: http://www.winchiphead.com/. + + For any questions or problems with this driver, please contact + frank@kingswood-consulting.co.uk. + +Moschip MCS7720, MCS7715 driver +------------------------------- + + These chips are present in devices sold by various manufacturers, such as Syba + and Cables Unlimited. There may be others. The 7720 provides two serial + ports, and the 7715 provides one serial and one standard PC parallel port. + Support for the 7715's parallel port is enabled by a separate option, which + will not appear unless parallel port support is first enabled at the top-level + of the Device Drivers config menu. Currently only compatibility mode is + supported on the parallel port (no ECP/EPP). + + TODO: + - Implement ECP/EPP modes for the parallel port. + - Baud rates higher than 115200 are currently broken. + - Devices with a single serial port based on the Moschip MCS7703 may work + with this driver with a simple addition to the usb_device_id table. I + don't have one of these devices, so I can't say for sure. + +Generic Serial driver +--------------------- + + If your device is not one of the above listed devices, compatible with + the above models, you can try out the "generic" interface. This + interface does not provide any type of control messages sent to the + device, and does not support any kind of device flow control. All that + is required of your device is that it has at least one bulk in endpoint, + or one bulk out endpoint. + + To enable the generic driver to recognize your device, provide:: + + echo >/sys/bus/usb-serial/drivers/generic/new_id + + where the and is replaced with the hex representation of your + device's vendor id and product id. + If the driver is compiled as a module you can also provide one id when + loading the module:: + + insmod usbserial vendor=0x#### product=0x#### + + This driver has been successfully used to connect to the NetChip USB + development board, providing a way to develop USB firmware without + having to write a custom driver. + + For any questions or problems with this driver, please contact Greg + Kroah-Hartman at greg@kroah.com + + +Contact +======= + + If anyone has any problems using these drivers, with any of the above + specified products, please contact the specific driver's author listed + above, or join the Linux-USB mailing list (information on joining the + mailing list, as well as a link to its searchable archive is at + http://www.linux-usb.org/ ) + + +Greg Kroah-Hartman +greg@kroah.com diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.txt deleted file mode 100644 index 8fa7dbd3da9a..000000000000 --- a/Documentation/usb/usb-serial.txt +++ /dev/null @@ -1,537 +0,0 @@ -========== -USB serial -========== - -Introduction -============ - - The USB serial driver currently supports a number of different USB to - serial converter products, as well as some devices that use a serial - interface from userspace to talk to the device. - - See the individual product section below for specific information about - the different devices. - - -Configuration -============= - - Currently the driver can handle up to 256 different serial interfaces at - one time. - - The major number that the driver uses is 188 so to use the driver, - create the following nodes:: - - mknod /dev/ttyUSB0 c 188 0 - mknod /dev/ttyUSB1 c 188 1 - mknod /dev/ttyUSB2 c 188 2 - mknod /dev/ttyUSB3 c 188 3 - . - . - . - mknod /dev/ttyUSB254 c 188 254 - mknod /dev/ttyUSB255 c 188 255 - - When the device is connected and recognized by the driver, the driver - will print to the system log, which node(s) the device has been bound - to. - - -Specific Devices Supported -========================== - - -ConnectTech WhiteHEAT 4 port converter --------------------------------------- - - ConnectTech has been very forthcoming with information about their - device, including providing a unit to test with. - - The driver is officially supported by Connect Tech Inc. - http://www.connecttech.com - - For any questions or problems with this driver, please contact - Connect Tech's Support Department at support@connecttech.com - - -HandSpring Visor, Palm USB, and Clié USB driver ------------------------------------------------ - - This driver works with all HandSpring USB, Palm USB, and Sony Clié USB - devices. - - Only when the device tries to connect to the host, will the device show - up to the host as a valid USB device. When this happens, the device is - properly enumerated, assigned a port, and then communication _should_ be - possible. The driver cleans up properly when the device is removed, or - the connection is canceled on the device. - - NOTE: - This means that in order to talk to the device, the sync button must be - pressed BEFORE trying to get any program to communicate to the device. - This goes against the current documentation for pilot-xfer and other - packages, but is the only way that it will work due to the hardware - in the device. - - When the device is connected, try talking to it on the second port - (this is usually /dev/ttyUSB1 if you do not have any other usb-serial - devices in the system.) The system log should tell you which port is - the port to use for the HotSync transfer. The "Generic" port can be used - for other device communication, such as a PPP link. - - For some Sony Clié devices, /dev/ttyUSB0 must be used to talk to the - device. This is true for all OS version 3.5 devices, and most devices - that have had a flash upgrade to a newer version of the OS. See the - kernel system log for information on which is the correct port to use. - - If after pressing the sync button, nothing shows up in the system log, - try resetting the device, first a hot reset, and then a cold reset if - necessary. Some devices need this before they can talk to the USB port - properly. - - Devices that are not compiled into the kernel can be specified with module - parameters. e.g. modprobe visor vendor=0x54c product=0x66 - - There is a webpage and mailing lists for this portion of the driver at: - http://sourceforge.net/projects/usbvisor/ - - For any questions or problems with this driver, please contact Greg - Kroah-Hartman at greg@kroah.com - - -PocketPC PDA Driver -------------------- - - This driver can be used to connect to Compaq iPAQ, HP Jornada, Casio EM500 - and other PDAs running Windows CE 3.0 or PocketPC 2002 using a USB - cable/cradle. - Most devices supported by ActiveSync are supported out of the box. - For others, please use module parameters to specify the product and vendor - id. e.g. modprobe ipaq vendor=0x3f0 product=0x1125 - - The driver presents a serial interface (usually on /dev/ttyUSB0) over - which one may run ppp and establish a TCP/IP link to the PDA. Once this - is done, you can transfer files, backup, download email etc. The most - significant advantage of using USB is speed - I can get 73 to 113 - kbytes/sec for download/upload to my iPAQ. - - This driver is only one of a set of components required to utilize - the USB connection. Please visit http://synce.sourceforge.net which - contains the necessary packages and a simple step-by-step howto. - - Once connected, you can use Win CE programs like ftpView, Pocket Outlook - from the PDA and xcerdisp, synce utilities from the Linux side. - - To use Pocket IE, follow the instructions given at - http://www.tekguru.co.uk/EM500/usbtonet.htm to achieve the same thing - on Win98. Omit the proxy server part; Linux is quite capable of forwarding - packets unlike Win98. Another modification is required at least for the - iPAQ - disable autosync by going to the Start/Settings/Connections menu - and unchecking the "Automatically synchronize ..." box. Go to - Start/Programs/Connections, connect the cable and select "usbdial" (or - whatever you named your new USB connection). You should finally wind - up with a "Connected to usbdial" window with status shown as connected. - Now start up PIE and browse away. - - If it doesn't work for some reason, load both the usbserial and ipaq module - with the module parameter "debug" set to 1 and examine the system log. - You can also try soft-resetting your PDA before attempting a connection. - - Other functionality may be possible depending on your PDA. According to - Wes Cilldhaire , with the Toshiba E570, - ...if you boot into the bootloader (hold down the power when hitting the - reset button, continuing to hold onto the power until the bootloader screen - is displayed), then put it in the cradle with the ipaq driver loaded, open - a terminal on /dev/ttyUSB0, it gives you a "USB Reflash" terminal, which can - be used to flash the ROM, as well as the microP code.. so much for needing - Toshiba's $350 serial cable for flashing!! :D - NOTE: This has NOT been tested. Use at your own risk. - - For any questions or problems with the driver, please contact Ganesh - Varadarajan - - -Keyspan PDA Serial Adapter --------------------------- - - Single port DB-9 serial adapter, pushed as a PDA adapter for iMacs (mostly - sold in Macintosh catalogs, comes in a translucent white/green dongle). - Fairly simple device. Firmware is homebrew. - This driver also works for the Xircom/Entrega single port serial adapter. - - Current status: - - Things that work: - - basic input/output (tested with 'cu') - - blocking write when serial line can't keep up - - changing baud rates (up to 115200) - - getting/setting modem control pins (TIOCM{GET,SET,BIS,BIC}) - - sending break (although duration looks suspect) - - Things that don't: - - device strings (as logged by kernel) have trailing binary garbage - - device ID isn't right, might collide with other Keyspan products - - changing baud rates ought to flush tx/rx to avoid mangled half characters - - Big Things on the todo list: - - parity, 7 vs 8 bits per char, 1 or 2 stop bits - - HW flow control - - not all of the standard USB descriptors are handled: - Get_Status, Set_Feature, O_NONBLOCK, select() - - For any questions or problems with this driver, please contact Brian - Warner at warner@lothar.com - - -Keyspan USA-series Serial Adapters ----------------------------------- - - Single, Dual and Quad port adapters - driver uses Keyspan supplied - firmware and is being developed with their support. - - Current status: - - The USA-18X, USA-28X, USA-19, USA-19W and USA-49W are supported and - have been pretty thoroughly tested at various baud rates with 8-N-1 - character settings. Other character lengths and parity setups are - presently untested. - - The USA-28 isn't yet supported though doing so should be pretty - straightforward. Contact the maintainer if you require this - functionality. - - More information is available at: - - http://www.carnationsoftware.com/carnation/Keyspan.html - - For any questions or problems with this driver, please contact Hugh - Blemings at hugh@misc.nu - - -FTDI Single Port Serial Driver ------------------------------- - - This is a single port DB-25 serial adapter. - - Devices supported include: - - - TripNav TN-200 USB GPS - - Navis Engineering Bureau CH-4711 USB GPS - - For any questions or problems with this driver, please contact Bill Ryder. - - -ZyXEL omni.net lcd plus ISDN TA -------------------------------- - - This is an ISDN TA. Please report both successes and troubles to - azummo@towertech.it - - -Cypress M8 CY4601 Family Serial Driver --------------------------------------- - - This driver was in most part developed by Neil "koyama" Whelchel. It - has been improved since that previous form to support dynamic serial - line settings and improved line handling. The driver is for the most - part stable and has been tested on an smp machine. (dual p2) - - Chipsets supported under CY4601 family: - - CY7C63723, CY7C63742, CY7C63743, CY7C64013 - - Devices supported: - - - DeLorme's USB Earthmate GPS (SiRF Star II lp arch) - - Cypress HID->COM RS232 adapter - - Note: - Cypress Semiconductor claims no affiliation with the - hid->com device. - - Most devices using chipsets under the CY4601 family should - work with the driver. As long as they stay true to the CY4601 - usbserial specification. - - Technical notes: - - The Earthmate starts out at 4800 8N1 by default... the driver will - upon start init to this setting. usbserial core provides the rest - of the termios settings, along with some custom termios so that the - output is in proper format and parsable. - - The device can be put into sirf mode by issuing NMEA command:: - - $PSRF100,,,,,*CHECKSUM - $PSRF100,0,9600,8,1,0*0C - - It should then be sufficient to change the port termios to match this - to begin communicating. - - As far as I can tell it supports pretty much every sirf command as - documented online available with firmware 2.31, with some unknown - message ids. - - The hid->com adapter can run at a maximum baud of 115200bps. Please note - that the device has trouble or is incapable of raising line voltage properly. - It will be fine with null modem links, as long as you do not try to link two - together without hacking the adapter to set the line high. - - The driver is smp safe. Performance with the driver is rather low when using - it for transferring files. This is being worked on, but I would be willing to - accept patches. An urb queue or packet buffer would likely fit the bill here. - - If you have any questions, problems, patches, feature requests, etc. you can - contact me here via email: - - dignome@gmail.com - - (your problems/patches can alternately be submitted to usb-devel) - - -Digi AccelePort Driver ----------------------- - - This driver supports the Digi AccelePort USB 2 and 4 devices, 2 port - (plus a parallel port) and 4 port USB serial converters. The driver - does NOT yet support the Digi AccelePort USB 8. - - This driver works under SMP with the usb-uhci driver. It does not - work under SMP with the uhci driver. - - The driver is generally working, though we still have a few more ioctls - to implement and final testing and debugging to do. The parallel port - on the USB 2 is supported as a serial to parallel converter; in other - words, it appears as another USB serial port on Linux, even though - physically it is really a parallel port. The Digi Acceleport USB 8 - is not yet supported. - - Please contact Peter Berger (pberger@brimson.com) or Al Borchers - (alborchers@steinerpoint.com) for questions or problems with this - driver. - - -Belkin USB Serial Adapter F5U103 --------------------------------- - - Single port DB-9/PS-2 serial adapter from Belkin with firmware by eTEK Labs. - The Peracom single port serial adapter also works with this driver, as - well as the GoHubs adapter. - - Current status: - - The following have been tested and work: - - - Baud rate 300-230400 - - Data bits 5-8 - - Stop bits 1-2 - - Parity N,E,O,M,S - - Handshake None, Software (XON/XOFF), Hardware (CTSRTS,CTSDTR) [1]_ - - Break Set and clear - - Line control Input/Output query and control [2]_ - - .. [1] - Hardware input flow control is only enabled for firmware - levels above 2.06. Read source code comments describing Belkin - firmware errata. Hardware output flow control is working for all - firmware versions. - - .. [2] - Queries of inputs (CTS,DSR,CD,RI) show the last - reported state. Queries of outputs (DTR,RTS) show the last - requested state and may not reflect current state as set by - automatic hardware flow control. - - TO DO List: - - Add true modem control line query capability. Currently tracks the - states reported by the interrupt and the states requested. - - Add error reporting back to application for UART error conditions. - - Add support for flush ioctls. - - Add everything else that is missing :) - - For any questions or problems with this driver, please contact William - Greathouse at wgreathouse@smva.com - - -Empeg empeg-car Mark I/II Driver --------------------------------- - - This is an experimental driver to provide connectivity support for the - client synchronization tools for an Empeg empeg-car mp3 player. - - Tips: - * Don't forget to create the device nodes for ttyUSB{0,1,2,...} - * modprobe empeg (modprobe is your friend) - * emptool --usb /dev/ttyUSB0 (or whatever you named your device node) - - For any questions or problems with this driver, please contact Gary - Brubaker at xavyer@ix.netcom.com - - -MCT USB Single Port Serial Adapter U232 ---------------------------------------- - - This driver is for the MCT USB-RS232 Converter (25 pin, Model No. - U232-P25) from Magic Control Technology Corp. (there is also a 9 pin - Model No. U232-P9). More information about this device can be found at - the manufacturer's web-site: http://www.mct.com.tw. - - The driver is generally working, though it still needs some more testing. - It is derived from the Belkin USB Serial Adapter F5U103 driver and its - TODO list is valid for this driver as well. - - This driver has also been found to work for other products, which have - the same Vendor ID but different Product IDs. Sitecom's U232-P25 serial - converter uses Product ID 0x230 and Vendor ID 0x711 and works with this - driver. Also, D-Link's DU-H3SP USB BAY also works with this driver. - - For any questions or problems with this driver, please contact Wolfgang - Grandegger at wolfgang@ces.ch - - -Inside Out Networks Edgeport Driver ------------------------------------ - - This driver supports all devices made by Inside Out Networks, specifically - the following models: - - - Edgeport/4 - - Rapidport/4 - - Edgeport/4t - - Edgeport/2 - - Edgeport/4i - - Edgeport/2i - - Edgeport/421 - - Edgeport/21 - - Edgeport/8 - - Edgeport/8 Dual - - Edgeport/2D8 - - Edgeport/4D8 - - Edgeport/8i - - Edgeport/2 DIN - - Edgeport/4 DIN - - Edgeport/16 Dual - - For any questions or problems with this driver, please contact Greg - Kroah-Hartman at greg@kroah.com - - -REINER SCT cyberJack pinpad/e-com USB chipcard reader ------------------------------------------------------ - - Interface to ISO 7816 compatible contactbased chipcards, e.g. GSM SIMs. - - Current status: - - This is the kernel part of the driver for this USB card reader. - There is also a user part for a CT-API driver available. A site - for downloading is TBA. For now, you can request it from the - maintainer (linux-usb@sii.li). - - For any questions or problems with this driver, please contact - linux-usb@sii.li - - -Prolific PL2303 Driver ----------------------- - - This driver supports any device that has the PL2303 chip from Prolific - in it. This includes a number of single port USB to serial converters, - more than 70% of USB GPS devices (in 2010), and some USB UPSes. Devices - from Aten (the UC-232) and IO-Data work with this driver, as does - the DCU-11 mobile-phone cable. - - For any questions or problems with this driver, please contact Greg - Kroah-Hartman at greg@kroah.com - - -KL5KUSB105 chipset / PalmConnect USB single-port adapter --------------------------------------------------------- - -Current status: - - The driver was put together by looking at the usb bus transactions - done by Palm's driver under Windows, so a lot of functionality is - still missing. Notably, serial ioctls are sometimes faked or not yet - implemented. Support for finding out about DSR and CTS line status is - however implemented (though not nicely), so your favorite autopilot(1) - and pilot-manager -daemon calls will work. Baud rates up to 115200 - are supported, but handshaking (software or hardware) is not, which is - why it is wise to cut down on the rate used is wise for large - transfers until this is settled. - - See http://www.uuhaus.de/linux/palmconnect.html for up-to-date - information on this driver. - -Winchiphead CH341 Driver ------------------------- - - This driver is for the Winchiphead CH341 USB-RS232 Converter. This chip - also implements an IEEE 1284 parallel port, I2C and SPI, but that is not - supported by the driver. The protocol was analyzed from the behaviour - of the Windows driver, no datasheet is available at present. - - The manufacturer's website: http://www.winchiphead.com/. - - For any questions or problems with this driver, please contact - frank@kingswood-consulting.co.uk. - -Moschip MCS7720, MCS7715 driver -------------------------------- - - These chips are present in devices sold by various manufacturers, such as Syba - and Cables Unlimited. There may be others. The 7720 provides two serial - ports, and the 7715 provides one serial and one standard PC parallel port. - Support for the 7715's parallel port is enabled by a separate option, which - will not appear unless parallel port support is first enabled at the top-level - of the Device Drivers config menu. Currently only compatibility mode is - supported on the parallel port (no ECP/EPP). - - TODO: - - Implement ECP/EPP modes for the parallel port. - - Baud rates higher than 115200 are currently broken. - - Devices with a single serial port based on the Moschip MCS7703 may work - with this driver with a simple addition to the usb_device_id table. I - don't have one of these devices, so I can't say for sure. - -Generic Serial driver ---------------------- - - If your device is not one of the above listed devices, compatible with - the above models, you can try out the "generic" interface. This - interface does not provide any type of control messages sent to the - device, and does not support any kind of device flow control. All that - is required of your device is that it has at least one bulk in endpoint, - or one bulk out endpoint. - - To enable the generic driver to recognize your device, provide:: - - echo >/sys/bus/usb-serial/drivers/generic/new_id - - where the and is replaced with the hex representation of your - device's vendor id and product id. - If the driver is compiled as a module you can also provide one id when - loading the module:: - - insmod usbserial vendor=0x#### product=0x#### - - This driver has been successfully used to connect to the NetChip USB - development board, providing a way to develop USB firmware without - having to write a custom driver. - - For any questions or problems with this driver, please contact Greg - Kroah-Hartman at greg@kroah.com - - -Contact -======= - - If anyone has any problems using these drivers, with any of the above - specified products, please contact the specific driver's author listed - above, or join the Linux-USB mailing list (information on joining the - mailing list, as well as a link to its searchable archive is at - http://www.linux-usb.org/ ) - - -Greg Kroah-Hartman -greg@kroah.com diff --git a/Documentation/usb/usbip_protocol.rst b/Documentation/usb/usbip_protocol.rst new file mode 100644 index 000000000000..988c832166cd --- /dev/null +++ b/Documentation/usb/usbip_protocol.rst @@ -0,0 +1,411 @@ +=============== +USB/IP protocol +=============== + +PRELIMINARY DRAFT, MAY CONTAIN MISTAKES! +28 Jun 2011 + +The USB/IP protocol follows a server/client architecture. The server exports the +USB devices and the clients imports them. The device driver for the exported +USB device runs on the client machine. + +The client may ask for the list of the exported USB devices. To get the list the +client opens a TCP/IP connection towards the server, and sends an OP_REQ_DEVLIST +packet on top of the TCP/IP connection (so the actual OP_REQ_DEVLIST may be sent +in one or more pieces at the low level transport layer). The server sends back +the OP_REP_DEVLIST packet which lists the exported USB devices. Finally the +TCP/IP connection is closed. + +:: + + virtual host controller usb host + "client" "server" + (imports USB devices) (exports USB devices) + | | + | OP_REQ_DEVLIST | + | ----------------------------------------------> | + | | + | OP_REP_DEVLIST | + | <---------------------------------------------- | + | | + +Once the client knows the list of exported USB devices it may decide to use one +of them. First the client opens a TCP/IP connection towards the server and +sends an OP_REQ_IMPORT packet. The server replies with OP_REP_IMPORT. If the +import was successful the TCP/IP connection remains open and will be used +to transfer the URB traffic between the client and the server. The client may +send two types of packets: the USBIP_CMD_SUBMIT to submit an URB, and +USBIP_CMD_UNLINK to unlink a previously submitted URB. The answers of the +server may be USBIP_RET_SUBMIT and USBIP_RET_UNLINK respectively. + +:: + + virtual host controller usb host + "client" "server" + (imports USB devices) (exports USB devices) + | | + | OP_REQ_IMPORT | + | ----------------------------------------------> | + | | + | OP_REP_IMPORT | + | <---------------------------------------------- | + | | + | | + | USBIP_CMD_SUBMIT(seqnum = n) | + | ----------------------------------------------> | + | | + | USBIP_RET_SUBMIT(seqnum = n) | + | <---------------------------------------------- | + | . | + | : | + | | + | USBIP_CMD_SUBMIT(seqnum = m) | + | ----------------------------------------------> | + | | + | USBIP_CMD_SUBMIT(seqnum = m+1) | + | ----------------------------------------------> | + | | + | USBIP_CMD_SUBMIT(seqnum = m+2) | + | ----------------------------------------------> | + | | + | USBIP_RET_SUBMIT(seqnum = m) | + | <---------------------------------------------- | + | | + | USBIP_CMD_SUBMIT(seqnum = m+3) | + | ----------------------------------------------> | + | | + | USBIP_RET_SUBMIT(seqnum = m+1) | + | <---------------------------------------------- | + | | + | USBIP_CMD_SUBMIT(seqnum = m+4) | + | ----------------------------------------------> | + | | + | USBIP_RET_SUBMIT(seqnum = m+2) | + | <---------------------------------------------- | + | . | + | : | + | | + | USBIP_CMD_UNLINK | + | ----------------------------------------------> | + | | + | USBIP_RET_UNLINK | + | <---------------------------------------------- | + | | + +The fields are in network (big endian) byte order meaning that the most significant +byte (MSB) is stored at the lowest address. + + +OP_REQ_DEVLIST: + Retrieve the list of exported USB devices. + ++-----------+--------+------------+---------------------------------------------------+ +| Offset | Length | Value | Description | ++===========+========+============+===================================================+ +| 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 | ++-----------+--------+------------+---------------------------------------------------+ +| 2 | 2 | 0x8005 | Command code: Retrieve the list of exported USB | +| | | | devices. | ++-----------+--------+------------+---------------------------------------------------+ +| 4 | 4 | 0x00000000 | Status: unused, shall be set to 0 | ++-----------+--------+------------+---------------------------------------------------+ + +OP_REP_DEVLIST: + Reply with the list of exported USB devices. + ++-----------+--------+------------+---------------------------------------------------+ +| Offset | Length | Value | Description | ++===========+========+============+===================================================+ +| 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0.| ++-----------+--------+------------+---------------------------------------------------+ +| 2 | 2 | 0x0005 | Reply code: The list of exported USB devices. | ++-----------+--------+------------+---------------------------------------------------+ +| 4 | 4 | 0x00000000 | Status: 0 for OK | ++-----------+--------+------------+---------------------------------------------------+ +| 8 | 4 | n | Number of exported devices: 0 means no exported | +| | | | devices. | ++-----------+--------+------------+---------------------------------------------------+ +| 0x0C | | | From now on the exported n devices are described, | +| | | | if any. If no devices are exported the message | +| | | | ends with the previous "number of exported | +| | | | devices" field. | ++-----------+--------+------------+---------------------------------------------------+ +| | 256 | | path: Path of the device on the host exporting the| +| | | | USB device, string closed with zero byte, e.g. | +| | | | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2" | +| | | | The unused bytes shall be filled with zero | +| | | | bytes. | ++-----------+--------+------------+---------------------------------------------------+ +| 0x10C | 32 | | busid: Bus ID of the exported device, string | +| | | | closed with zero byte, e.g. "3-2". The unused | +| | | | bytes shall be filled with zero bytes. | ++-----------+--------+------------+---------------------------------------------------+ +| 0x12C | 4 | | busnum | ++-----------+--------+------------+---------------------------------------------------+ +| 0x130 | 4 | | devnum | ++-----------+--------+------------+---------------------------------------------------+ +| 0x134 | 4 | | speed | ++-----------+--------+------------+---------------------------------------------------+ +| 0x138 | 2 | | idVendor | ++-----------+--------+------------+---------------------------------------------------+ +| 0x13A | 2 | | idProduct | ++-----------+--------+------------+---------------------------------------------------+ +| 0x13C | 2 | | bcdDevice | ++-----------+--------+------------+---------------------------------------------------+ +| 0x13E | 1 | | bDeviceClass | ++-----------+--------+------------+---------------------------------------------------+ +| 0x13F | 1 | | bDeviceSubClass | ++-----------+--------+------------+---------------------------------------------------+ +| 0x140 | 1 | | bDeviceProtocol | ++-----------+--------+------------+---------------------------------------------------+ +| 0x141 | 1 | | bConfigurationValue | ++-----------+--------+------------+---------------------------------------------------+ +| 0x142 | 1 | | bNumConfigurations | ++-----------+--------+------------+---------------------------------------------------+ +| 0x143 | 1 | | bNumInterfaces | ++-----------+--------+------------+---------------------------------------------------+ +| 0x144 | | m_0 | From now on each interface is described, all | +| | | | together bNumInterfaces times, with the | +| | | | the following 4 fields: | ++-----------+--------+------------+---------------------------------------------------+ +| | 1 | | bInterfaceClass | ++-----------+--------+------------+---------------------------------------------------+ +| 0x145 | 1 | | bInterfaceSubClass | ++-----------+--------+------------+---------------------------------------------------+ +| 0x146 | 1 | | bInterfaceProtocol | ++-----------+--------+------------+---------------------------------------------------+ +| 0x147 | 1 | | padding byte for alignment, shall be set to zero | ++-----------+--------+------------+---------------------------------------------------+ +| 0xC + | | | The second exported USB device starts at i=1 | +| i*0x138 + | | | with the busid field. | +| m_(i-1)*4 | | | | ++-----------+--------+------------+---------------------------------------------------+ + +OP_REQ_IMPORT: + Request to import (attach) a remote USB device. + ++-----------+--------+------------+---------------------------------------------------+ +| Offset | Length | Value | Description | ++===========+========+============+===================================================+ +| 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 | ++-----------+--------+------------+---------------------------------------------------+ +| 2 | 2 | 0x8003 | Command code: import a remote USB device. | ++-----------+--------+------------+---------------------------------------------------+ +| 4 | 4 | 0x00000000 | Status: unused, shall be set to 0 | ++-----------+--------+------------+---------------------------------------------------+ +| 8 | 32 | | busid: the busid of the exported device on the | +| | | | remote host. The possible values are taken | +| | | | from the message field OP_REP_DEVLIST.busid. | +| | | | A string closed with zero, the unused bytes | +| | | | shall be filled with zeros. | ++-----------+--------+------------+---------------------------------------------------+ + +OP_REP_IMPORT: + Reply to import (attach) a remote USB device. + ++-----------+--------+------------+---------------------------------------------------+ +| Offset | Length | Value | Description | ++===========+========+============+===================================================+ +| 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 | ++-----------+--------+------------+---------------------------------------------------+ +| 2 | 2 | 0x0003 | Reply code: Reply to import. | ++-----------+--------+------------+---------------------------------------------------+ +| 4 | 4 | 0x00000000 | Status: | +| | | | | +| | | | - 0 for OK | +| | | | - 1 for error | ++-----------+--------+------------+---------------------------------------------------+ +| 8 | | | From now on comes the details of the imported | +| | | | device, if the previous status field was OK (0), | +| | | | otherwise the reply ends with the status field. | ++-----------+--------+------------+---------------------------------------------------+ +| | 256 | | path: Path of the device on the host exporting the| +| | | | USB device, string closed with zero byte, e.g. | +| | | | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2" | +| | | | The unused bytes shall be filled with zero | +| | | | bytes. | ++-----------+--------+------------+---------------------------------------------------+ +| 0x108 | 32 | | busid: Bus ID of the exported device, string | +| | | | closed with zero byte, e.g. "3-2". The unused | +| | | | bytes shall be filled with zero bytes. | ++-----------+--------+------------+---------------------------------------------------+ +| 0x128 | 4 | | busnum | ++-----------+--------+------------+---------------------------------------------------+ +| 0x12C | 4 | | devnum | ++-----------+--------+------------+---------------------------------------------------+ +| 0x130 | 4 | | speed | ++-----------+--------+------------+---------------------------------------------------+ +| 0x134 | 2 | | idVendor | ++-----------+--------+------------+---------------------------------------------------+ +| 0x136 | 2 | | idProduct | ++-----------+--------+------------+---------------------------------------------------+ +| 0x138 | 2 | | bcdDevice | ++-----------+--------+------------+---------------------------------------------------+ +| 0x139 | 1 | | bDeviceClass | ++-----------+--------+------------+---------------------------------------------------+ +| 0x13A | 1 | | bDeviceSubClass | ++-----------+--------+------------+---------------------------------------------------+ +| 0x13B | 1 | | bDeviceProtocol | ++-----------+--------+------------+---------------------------------------------------+ +| 0x13C | 1 | | bConfigurationValue | ++-----------+--------+------------+---------------------------------------------------+ +| 0x13D | 1 | | bNumConfigurations | ++-----------+--------+------------+---------------------------------------------------+ +| 0x13E | 1 | | bNumInterfaces | ++-----------+--------+------------+---------------------------------------------------+ + +USBIP_CMD_SUBMIT: + Submit an URB + ++-----------+--------+------------+---------------------------------------------------+ +| Offset | Length | Value | Description | ++===========+========+============+===================================================+ +| 0 | 4 | 0x00000001 | command: Submit an URB | ++-----------+--------+------------+---------------------------------------------------+ +| 4 | 4 | | seqnum: the sequence number of the URB to submit | ++-----------+--------+------------+---------------------------------------------------+ +| 8 | 4 | | devid | ++-----------+--------+------------+---------------------------------------------------+ +| 0xC | 4 | | direction: | +| | | | | +| | | | - 0: USBIP_DIR_OUT | +| | | | - 1: USBIP_DIR_IN | ++-----------+--------+------------+---------------------------------------------------+ +| 0x10 | 4 | | ep: endpoint number, possible values are: 0...15 | ++-----------+--------+------------+---------------------------------------------------+ +| 0x14 | 4 | | transfer_flags: possible values depend on the | +| | | | URB transfer type, see below | ++-----------+--------+------------+---------------------------------------------------+ +| 0x18 | 4 | | transfer_buffer_length | ++-----------+--------+------------+---------------------------------------------------+ +| 0x1C | 4 | | start_frame: specify the selected frame to | +| | | | transmit an ISO frame, ignored if URB_ISO_ASAP | +| | | | is specified at transfer_flags | ++-----------+--------+------------+---------------------------------------------------+ +| 0x20 | 4 | | number_of_packets: number of ISO packets | ++-----------+--------+------------+---------------------------------------------------+ +| 0x24 | 4 | | interval: maximum time for the request on the | +| | | | server-side host controller | ++-----------+--------+------------+---------------------------------------------------+ +| 0x28 | 8 | | setup: data bytes for USB setup, filled with | +| | | | zeros if not used | ++-----------+--------+------------+---------------------------------------------------+ +| 0x30 | | | URB data. For ISO transfers the padding between | +| | | | each ISO packets is not transmitted. | ++-----------+--------+------------+---------------------------------------------------+ + + + +-------------------------+------------+---------+-----------+----------+-------------+ + | Allowed transfer_flags | value | control | interrupt | bulk | isochronous | + +=========================+============+=========+===========+==========+=============+ + | URB_SHORT_NOT_OK | 0x00000001 | only in | only in | only in | no | + +-------------------------+------------+---------+-----------+----------+-------------+ + | URB_ISO_ASAP | 0x00000002 | no | no | no | yes | + +-------------------------+------------+---------+-----------+----------+-------------+ + | URB_NO_TRANSFER_DMA_MAP | 0x00000004 | yes | yes | yes | yes | + +-------------------------+------------+---------+-----------+----------+-------------+ + | URB_ZERO_PACKET | 0x00000040 | no | no | only out | no | + +-------------------------+------------+---------+-----------+----------+-------------+ + | URB_NO_INTERRUPT | 0x00000080 | yes | yes | yes | yes | + +-------------------------+------------+---------+-----------+----------+-------------+ + | URB_FREE_BUFFER | 0x00000100 | yes | yes | yes | yes | + +-------------------------+------------+---------+-----------+----------+-------------+ + | URB_DIR_MASK | 0x00000200 | yes | yes | yes | yes | + +-------------------------+------------+---------+-----------+----------+-------------+ + + +USBIP_RET_SUBMIT: + Reply for submitting an URB + ++-----------+--------+------------+---------------------------------------------------+ +| Offset | Length | Value | Description | ++===========+========+============+===================================================+ +| 0 | 4 | 0x00000003 | command | ++-----------+--------+------------+---------------------------------------------------+ +| 4 | 4 | | seqnum: URB sequence number | ++-----------+--------+------------+---------------------------------------------------+ +| 8 | 4 | | devid | ++-----------+--------+------------+---------------------------------------------------+ +| 0xC | 4 | | direction: | +| | | | | +| | | | - 0: USBIP_DIR_OUT | +| | | | - 1: USBIP_DIR_IN | ++-----------+--------+------------+---------------------------------------------------+ +| 0x10 | 4 | | ep: endpoint number | ++-----------+--------+------------+---------------------------------------------------+ +| 0x14 | 4 | | status: zero for successful URB transaction, | +| | | | otherwise some kind of error happened. | ++-----------+--------+------------+---------------------------------------------------+ +| 0x18 | 4 | n | actual_length: number of URB data bytes | ++-----------+--------+------------+---------------------------------------------------+ +| 0x1C | 4 | | start_frame: for an ISO frame the actually | +| | | | selected frame for transmit. | ++-----------+--------+------------+---------------------------------------------------+ +| 0x20 | 4 | | number_of_packets | ++-----------+--------+------------+---------------------------------------------------+ +| 0x24 | 4 | | error_count | ++-----------+--------+------------+---------------------------------------------------+ +| 0x28 | 8 | | setup: data bytes for USB setup, filled with | +| | | | zeros if not used | ++-----------+--------+------------+---------------------------------------------------+ +| 0x30 | n | | URB data bytes. For ISO transfers the padding | +| | | | between each ISO packets is not transmitted. | ++-----------+--------+------------+---------------------------------------------------+ + +USBIP_CMD_UNLINK: + Unlink an URB + ++-----------+--------+------------+---------------------------------------------------+ +| Offset | Length | Value | Description | ++===========+========+============+===================================================+ +| 0 | 4 | 0x00000002 | command: URB unlink command | ++-----------+--------+------------+---------------------------------------------------+ +| 4 | 4 | | seqnum: URB sequence number to unlink: | +| | | | | +| | | | FIXME: | +| | | | is this so? | ++-----------+--------+------------+---------------------------------------------------+ +| 8 | 4 | | devid | ++-----------+--------+------------+---------------------------------------------------+ +| 0xC | 4 | | direction: | +| | | | | +| | | | - 0: USBIP_DIR_OUT | +| | | | - 1: USBIP_DIR_IN | ++-----------+--------+------------+---------------------------------------------------+ +| 0x10 | 4 | | ep: endpoint number: zero | ++-----------+--------+------------+---------------------------------------------------+ +| 0x14 | 4 | | seqnum: the URB sequence number given previously | +| | | | at USBIP_CMD_SUBMIT.seqnum field | ++-----------+--------+------------+---------------------------------------------------+ +| 0x30 | n | | URB data bytes. For ISO transfers the padding | +| | | | between each ISO packets is not transmitted. | ++-----------+--------+------------+---------------------------------------------------+ + +USBIP_RET_UNLINK: + Reply for URB unlink + ++-----------+--------+------------+---------------------------------------------------+ +| Offset | Length | Value | Description | ++===========+========+============+===================================================+ +| 0 | 4 | 0x00000004 | command: reply for the URB unlink command | ++-----------+--------+------------+---------------------------------------------------+ +| 4 | 4 | | seqnum: the unlinked URB sequence number | ++-----------+--------+------------+---------------------------------------------------+ +| 8 | 4 | | devid | ++-----------+--------+------------+---------------------------------------------------+ +| 0xC | 4 | | direction: | +| | | | | +| | | | - 0: USBIP_DIR_OUT | +| | | | - 1: USBIP_DIR_IN | ++-----------+--------+------------+---------------------------------------------------+ +| 0x10 | 4 | | ep: endpoint number | ++-----------+--------+------------+---------------------------------------------------+ +| 0x14 | 4 | | status: This is the value contained in the | +| | | | urb->status in the URB completition handler. | +| | | | | +| | | | FIXME: | +| | | | a better explanation needed. | ++-----------+--------+------------+---------------------------------------------------+ +| 0x30 | n | | URB data bytes. For ISO transfers the padding | +| | | | between each ISO packets is not transmitted. | ++-----------+--------+------------+---------------------------------------------------+ diff --git a/Documentation/usb/usbip_protocol.txt b/Documentation/usb/usbip_protocol.txt deleted file mode 100644 index 988c832166cd..000000000000 --- a/Documentation/usb/usbip_protocol.txt +++ /dev/null @@ -1,411 +0,0 @@ -=============== -USB/IP protocol -=============== - -PRELIMINARY DRAFT, MAY CONTAIN MISTAKES! -28 Jun 2011 - -The USB/IP protocol follows a server/client architecture. The server exports the -USB devices and the clients imports them. The device driver for the exported -USB device runs on the client machine. - -The client may ask for the list of the exported USB devices. To get the list the -client opens a TCP/IP connection towards the server, and sends an OP_REQ_DEVLIST -packet on top of the TCP/IP connection (so the actual OP_REQ_DEVLIST may be sent -in one or more pieces at the low level transport layer). The server sends back -the OP_REP_DEVLIST packet which lists the exported USB devices. Finally the -TCP/IP connection is closed. - -:: - - virtual host controller usb host - "client" "server" - (imports USB devices) (exports USB devices) - | | - | OP_REQ_DEVLIST | - | ----------------------------------------------> | - | | - | OP_REP_DEVLIST | - | <---------------------------------------------- | - | | - -Once the client knows the list of exported USB devices it may decide to use one -of them. First the client opens a TCP/IP connection towards the server and -sends an OP_REQ_IMPORT packet. The server replies with OP_REP_IMPORT. If the -import was successful the TCP/IP connection remains open and will be used -to transfer the URB traffic between the client and the server. The client may -send two types of packets: the USBIP_CMD_SUBMIT to submit an URB, and -USBIP_CMD_UNLINK to unlink a previously submitted URB. The answers of the -server may be USBIP_RET_SUBMIT and USBIP_RET_UNLINK respectively. - -:: - - virtual host controller usb host - "client" "server" - (imports USB devices) (exports USB devices) - | | - | OP_REQ_IMPORT | - | ----------------------------------------------> | - | | - | OP_REP_IMPORT | - | <---------------------------------------------- | - | | - | | - | USBIP_CMD_SUBMIT(seqnum = n) | - | ----------------------------------------------> | - | | - | USBIP_RET_SUBMIT(seqnum = n) | - | <---------------------------------------------- | - | . | - | : | - | | - | USBIP_CMD_SUBMIT(seqnum = m) | - | ----------------------------------------------> | - | | - | USBIP_CMD_SUBMIT(seqnum = m+1) | - | ----------------------------------------------> | - | | - | USBIP_CMD_SUBMIT(seqnum = m+2) | - | ----------------------------------------------> | - | | - | USBIP_RET_SUBMIT(seqnum = m) | - | <---------------------------------------------- | - | | - | USBIP_CMD_SUBMIT(seqnum = m+3) | - | ----------------------------------------------> | - | | - | USBIP_RET_SUBMIT(seqnum = m+1) | - | <---------------------------------------------- | - | | - | USBIP_CMD_SUBMIT(seqnum = m+4) | - | ----------------------------------------------> | - | | - | USBIP_RET_SUBMIT(seqnum = m+2) | - | <---------------------------------------------- | - | . | - | : | - | | - | USBIP_CMD_UNLINK | - | ----------------------------------------------> | - | | - | USBIP_RET_UNLINK | - | <---------------------------------------------- | - | | - -The fields are in network (big endian) byte order meaning that the most significant -byte (MSB) is stored at the lowest address. - - -OP_REQ_DEVLIST: - Retrieve the list of exported USB devices. - -+-----------+--------+------------+---------------------------------------------------+ -| Offset | Length | Value | Description | -+===========+========+============+===================================================+ -| 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 | -+-----------+--------+------------+---------------------------------------------------+ -| 2 | 2 | 0x8005 | Command code: Retrieve the list of exported USB | -| | | | devices. | -+-----------+--------+------------+---------------------------------------------------+ -| 4 | 4 | 0x00000000 | Status: unused, shall be set to 0 | -+-----------+--------+------------+---------------------------------------------------+ - -OP_REP_DEVLIST: - Reply with the list of exported USB devices. - -+-----------+--------+------------+---------------------------------------------------+ -| Offset | Length | Value | Description | -+===========+========+============+===================================================+ -| 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0.| -+-----------+--------+------------+---------------------------------------------------+ -| 2 | 2 | 0x0005 | Reply code: The list of exported USB devices. | -+-----------+--------+------------+---------------------------------------------------+ -| 4 | 4 | 0x00000000 | Status: 0 for OK | -+-----------+--------+------------+---------------------------------------------------+ -| 8 | 4 | n | Number of exported devices: 0 means no exported | -| | | | devices. | -+-----------+--------+------------+---------------------------------------------------+ -| 0x0C | | | From now on the exported n devices are described, | -| | | | if any. If no devices are exported the message | -| | | | ends with the previous "number of exported | -| | | | devices" field. | -+-----------+--------+------------+---------------------------------------------------+ -| | 256 | | path: Path of the device on the host exporting the| -| | | | USB device, string closed with zero byte, e.g. | -| | | | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2" | -| | | | The unused bytes shall be filled with zero | -| | | | bytes. | -+-----------+--------+------------+---------------------------------------------------+ -| 0x10C | 32 | | busid: Bus ID of the exported device, string | -| | | | closed with zero byte, e.g. "3-2". The unused | -| | | | bytes shall be filled with zero bytes. | -+-----------+--------+------------+---------------------------------------------------+ -| 0x12C | 4 | | busnum | -+-----------+--------+------------+---------------------------------------------------+ -| 0x130 | 4 | | devnum | -+-----------+--------+------------+---------------------------------------------------+ -| 0x134 | 4 | | speed | -+-----------+--------+------------+---------------------------------------------------+ -| 0x138 | 2 | | idVendor | -+-----------+--------+------------+---------------------------------------------------+ -| 0x13A | 2 | | idProduct | -+-----------+--------+------------+---------------------------------------------------+ -| 0x13C | 2 | | bcdDevice | -+-----------+--------+------------+---------------------------------------------------+ -| 0x13E | 1 | | bDeviceClass | -+-----------+--------+------------+---------------------------------------------------+ -| 0x13F | 1 | | bDeviceSubClass | -+-----------+--------+------------+---------------------------------------------------+ -| 0x140 | 1 | | bDeviceProtocol | -+-----------+--------+------------+---------------------------------------------------+ -| 0x141 | 1 | | bConfigurationValue | -+-----------+--------+------------+---------------------------------------------------+ -| 0x142 | 1 | | bNumConfigurations | -+-----------+--------+------------+---------------------------------------------------+ -| 0x143 | 1 | | bNumInterfaces | -+-----------+--------+------------+---------------------------------------------------+ -| 0x144 | | m_0 | From now on each interface is described, all | -| | | | together bNumInterfaces times, with the | -| | | | the following 4 fields: | -+-----------+--------+------------+---------------------------------------------------+ -| | 1 | | bInterfaceClass | -+-----------+--------+------------+---------------------------------------------------+ -| 0x145 | 1 | | bInterfaceSubClass | -+-----------+--------+------------+---------------------------------------------------+ -| 0x146 | 1 | | bInterfaceProtocol | -+-----------+--------+------------+---------------------------------------------------+ -| 0x147 | 1 | | padding byte for alignment, shall be set to zero | -+-----------+--------+------------+---------------------------------------------------+ -| 0xC + | | | The second exported USB device starts at i=1 | -| i*0x138 + | | | with the busid field. | -| m_(i-1)*4 | | | | -+-----------+--------+------------+---------------------------------------------------+ - -OP_REQ_IMPORT: - Request to import (attach) a remote USB device. - -+-----------+--------+------------+---------------------------------------------------+ -| Offset | Length | Value | Description | -+===========+========+============+===================================================+ -| 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 | -+-----------+--------+------------+---------------------------------------------------+ -| 2 | 2 | 0x8003 | Command code: import a remote USB device. | -+-----------+--------+------------+---------------------------------------------------+ -| 4 | 4 | 0x00000000 | Status: unused, shall be set to 0 | -+-----------+--------+------------+---------------------------------------------------+ -| 8 | 32 | | busid: the busid of the exported device on the | -| | | | remote host. The possible values are taken | -| | | | from the message field OP_REP_DEVLIST.busid. | -| | | | A string closed with zero, the unused bytes | -| | | | shall be filled with zeros. | -+-----------+--------+------------+---------------------------------------------------+ - -OP_REP_IMPORT: - Reply to import (attach) a remote USB device. - -+-----------+--------+------------+---------------------------------------------------+ -| Offset | Length | Value | Description | -+===========+========+============+===================================================+ -| 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 | -+-----------+--------+------------+---------------------------------------------------+ -| 2 | 2 | 0x0003 | Reply code: Reply to import. | -+-----------+--------+------------+---------------------------------------------------+ -| 4 | 4 | 0x00000000 | Status: | -| | | | | -| | | | - 0 for OK | -| | | | - 1 for error | -+-----------+--------+------------+---------------------------------------------------+ -| 8 | | | From now on comes the details of the imported | -| | | | device, if the previous status field was OK (0), | -| | | | otherwise the reply ends with the status field. | -+-----------+--------+------------+---------------------------------------------------+ -| | 256 | | path: Path of the device on the host exporting the| -| | | | USB device, string closed with zero byte, e.g. | -| | | | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2" | -| | | | The unused bytes shall be filled with zero | -| | | | bytes. | -+-----------+--------+------------+---------------------------------------------------+ -| 0x108 | 32 | | busid: Bus ID of the exported device, string | -| | | | closed with zero byte, e.g. "3-2". The unused | -| | | | bytes shall be filled with zero bytes. | -+-----------+--------+------------+---------------------------------------------------+ -| 0x128 | 4 | | busnum | -+-----------+--------+------------+---------------------------------------------------+ -| 0x12C | 4 | | devnum | -+-----------+--------+------------+---------------------------------------------------+ -| 0x130 | 4 | | speed | -+-----------+--------+------------+---------------------------------------------------+ -| 0x134 | 2 | | idVendor | -+-----------+--------+------------+---------------------------------------------------+ -| 0x136 | 2 | | idProduct | -+-----------+--------+------------+---------------------------------------------------+ -| 0x138 | 2 | | bcdDevice | -+-----------+--------+------------+---------------------------------------------------+ -| 0x139 | 1 | | bDeviceClass | -+-----------+--------+------------+---------------------------------------------------+ -| 0x13A | 1 | | bDeviceSubClass | -+-----------+--------+------------+---------------------------------------------------+ -| 0x13B | 1 | | bDeviceProtocol | -+-----------+--------+------------+---------------------------------------------------+ -| 0x13C | 1 | | bConfigurationValue | -+-----------+--------+------------+---------------------------------------------------+ -| 0x13D | 1 | | bNumConfigurations | -+-----------+--------+------------+---------------------------------------------------+ -| 0x13E | 1 | | bNumInterfaces | -+-----------+--------+------------+---------------------------------------------------+ - -USBIP_CMD_SUBMIT: - Submit an URB - -+-----------+--------+------------+---------------------------------------------------+ -| Offset | Length | Value | Description | -+===========+========+============+===================================================+ -| 0 | 4 | 0x00000001 | command: Submit an URB | -+-----------+--------+------------+---------------------------------------------------+ -| 4 | 4 | | seqnum: the sequence number of the URB to submit | -+-----------+--------+------------+---------------------------------------------------+ -| 8 | 4 | | devid | -+-----------+--------+------------+---------------------------------------------------+ -| 0xC | 4 | | direction: | -| | | | | -| | | | - 0: USBIP_DIR_OUT | -| | | | - 1: USBIP_DIR_IN | -+-----------+--------+------------+---------------------------------------------------+ -| 0x10 | 4 | | ep: endpoint number, possible values are: 0...15 | -+-----------+--------+------------+---------------------------------------------------+ -| 0x14 | 4 | | transfer_flags: possible values depend on the | -| | | | URB transfer type, see below | -+-----------+--------+------------+---------------------------------------------------+ -| 0x18 | 4 | | transfer_buffer_length | -+-----------+--------+------------+---------------------------------------------------+ -| 0x1C | 4 | | start_frame: specify the selected frame to | -| | | | transmit an ISO frame, ignored if URB_ISO_ASAP | -| | | | is specified at transfer_flags | -+-----------+--------+------------+---------------------------------------------------+ -| 0x20 | 4 | | number_of_packets: number of ISO packets | -+-----------+--------+------------+---------------------------------------------------+ -| 0x24 | 4 | | interval: maximum time for the request on the | -| | | | server-side host controller | -+-----------+--------+------------+---------------------------------------------------+ -| 0x28 | 8 | | setup: data bytes for USB setup, filled with | -| | | | zeros if not used | -+-----------+--------+------------+---------------------------------------------------+ -| 0x30 | | | URB data. For ISO transfers the padding between | -| | | | each ISO packets is not transmitted. | -+-----------+--------+------------+---------------------------------------------------+ - - - +-------------------------+------------+---------+-----------+----------+-------------+ - | Allowed transfer_flags | value | control | interrupt | bulk | isochronous | - +=========================+============+=========+===========+==========+=============+ - | URB_SHORT_NOT_OK | 0x00000001 | only in | only in | only in | no | - +-------------------------+------------+---------+-----------+----------+-------------+ - | URB_ISO_ASAP | 0x00000002 | no | no | no | yes | - +-------------------------+------------+---------+-----------+----------+-------------+ - | URB_NO_TRANSFER_DMA_MAP | 0x00000004 | yes | yes | yes | yes | - +-------------------------+------------+---------+-----------+----------+-------------+ - | URB_ZERO_PACKET | 0x00000040 | no | no | only out | no | - +-------------------------+------------+---------+-----------+----------+-------------+ - | URB_NO_INTERRUPT | 0x00000080 | yes | yes | yes | yes | - +-------------------------+------------+---------+-----------+----------+-------------+ - | URB_FREE_BUFFER | 0x00000100 | yes | yes | yes | yes | - +-------------------------+------------+---------+-----------+----------+-------------+ - | URB_DIR_MASK | 0x00000200 | yes | yes | yes | yes | - +-------------------------+------------+---------+-----------+----------+-------------+ - - -USBIP_RET_SUBMIT: - Reply for submitting an URB - -+-----------+--------+------------+---------------------------------------------------+ -| Offset | Length | Value | Description | -+===========+========+============+===================================================+ -| 0 | 4 | 0x00000003 | command | -+-----------+--------+------------+---------------------------------------------------+ -| 4 | 4 | | seqnum: URB sequence number | -+-----------+--------+------------+---------------------------------------------------+ -| 8 | 4 | | devid | -+-----------+--------+------------+---------------------------------------------------+ -| 0xC | 4 | | direction: | -| | | | | -| | | | - 0: USBIP_DIR_OUT | -| | | | - 1: USBIP_DIR_IN | -+-----------+--------+------------+---------------------------------------------------+ -| 0x10 | 4 | | ep: endpoint number | -+-----------+--------+------------+---------------------------------------------------+ -| 0x14 | 4 | | status: zero for successful URB transaction, | -| | | | otherwise some kind of error happened. | -+-----------+--------+------------+---------------------------------------------------+ -| 0x18 | 4 | n | actual_length: number of URB data bytes | -+-----------+--------+------------+---------------------------------------------------+ -| 0x1C | 4 | | start_frame: for an ISO frame the actually | -| | | | selected frame for transmit. | -+-----------+--------+------------+---------------------------------------------------+ -| 0x20 | 4 | | number_of_packets | -+-----------+--------+------------+---------------------------------------------------+ -| 0x24 | 4 | | error_count | -+-----------+--------+------------+---------------------------------------------------+ -| 0x28 | 8 | | setup: data bytes for USB setup, filled with | -| | | | zeros if not used | -+-----------+--------+------------+---------------------------------------------------+ -| 0x30 | n | | URB data bytes. For ISO transfers the padding | -| | | | between each ISO packets is not transmitted. | -+-----------+--------+------------+---------------------------------------------------+ - -USBIP_CMD_UNLINK: - Unlink an URB - -+-----------+--------+------------+---------------------------------------------------+ -| Offset | Length | Value | Description | -+===========+========+============+===================================================+ -| 0 | 4 | 0x00000002 | command: URB unlink command | -+-----------+--------+------------+---------------------------------------------------+ -| 4 | 4 | | seqnum: URB sequence number to unlink: | -| | | | | -| | | | FIXME: | -| | | | is this so? | -+-----------+--------+------------+---------------------------------------------------+ -| 8 | 4 | | devid | -+-----------+--------+------------+---------------------------------------------------+ -| 0xC | 4 | | direction: | -| | | | | -| | | | - 0: USBIP_DIR_OUT | -| | | | - 1: USBIP_DIR_IN | -+-----------+--------+------------+---------------------------------------------------+ -| 0x10 | 4 | | ep: endpoint number: zero | -+-----------+--------+------------+---------------------------------------------------+ -| 0x14 | 4 | | seqnum: the URB sequence number given previously | -| | | | at USBIP_CMD_SUBMIT.seqnum field | -+-----------+--------+------------+---------------------------------------------------+ -| 0x30 | n | | URB data bytes. For ISO transfers the padding | -| | | | between each ISO packets is not transmitted. | -+-----------+--------+------------+---------------------------------------------------+ - -USBIP_RET_UNLINK: - Reply for URB unlink - -+-----------+--------+------------+---------------------------------------------------+ -| Offset | Length | Value | Description | -+===========+========+============+===================================================+ -| 0 | 4 | 0x00000004 | command: reply for the URB unlink command | -+-----------+--------+------------+---------------------------------------------------+ -| 4 | 4 | | seqnum: the unlinked URB sequence number | -+-----------+--------+------------+---------------------------------------------------+ -| 8 | 4 | | devid | -+-----------+--------+------------+---------------------------------------------------+ -| 0xC | 4 | | direction: | -| | | | | -| | | | - 0: USBIP_DIR_OUT | -| | | | - 1: USBIP_DIR_IN | -+-----------+--------+------------+---------------------------------------------------+ -| 0x10 | 4 | | ep: endpoint number | -+-----------+--------+------------+---------------------------------------------------+ -| 0x14 | 4 | | status: This is the value contained in the | -| | | | urb->status in the URB completition handler. | -| | | | | -| | | | FIXME: | -| | | | a better explanation needed. | -+-----------+--------+------------+---------------------------------------------------+ -| 0x30 | n | | URB data bytes. For ISO transfers the padding | -| | | | between each ISO packets is not transmitted. | -+-----------+--------+------------+---------------------------------------------------+ diff --git a/Documentation/usb/usbmon.rst b/Documentation/usb/usbmon.rst new file mode 100644 index 000000000000..b0bd51080799 --- /dev/null +++ b/Documentation/usb/usbmon.rst @@ -0,0 +1,375 @@ +====== +usbmon +====== + +Introduction +============ + +The name "usbmon" in lowercase refers to a facility in kernel which is +used to collect traces of I/O on the USB bus. This function is analogous +to a packet socket used by network monitoring tools such as tcpdump(1) +or Ethereal. Similarly, it is expected that a tool such as usbdump or +USBMon (with uppercase letters) is used to examine raw traces produced +by usbmon. + +The usbmon reports requests made by peripheral-specific drivers to Host +Controller Drivers (HCD). So, if HCD is buggy, the traces reported by +usbmon may not correspond to bus transactions precisely. This is the same +situation as with tcpdump. + +Two APIs are currently implemented: "text" and "binary". The binary API +is available through a character device in /dev namespace and is an ABI. +The text API is deprecated since 2.6.35, but available for convenience. + +How to use usbmon to collect raw text traces +============================================ + +Unlike the packet socket, usbmon has an interface which provides traces +in a text format. This is used for two purposes. First, it serves as a +common trace exchange format for tools while more sophisticated formats +are finalized. Second, humans can read it in case tools are not available. + +To collect a raw text trace, execute following steps. + +1. Prepare +---------- + +Mount debugfs (it has to be enabled in your kernel configuration), and +load the usbmon module (if built as module). The second step is skipped +if usbmon is built into the kernel:: + + # mount -t debugfs none_debugs /sys/kernel/debug + # modprobe usbmon + # + +Verify that bus sockets are present: + + # ls /sys/kernel/debug/usb/usbmon + 0s 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u + # + +Now you can choose to either use the socket '0u' (to capture packets on all +buses), and skip to step #3, or find the bus used by your device with step #2. +This allows to filter away annoying devices that talk continuously. + +2. Find which bus connects to the desired device +------------------------------------------------ + +Run "cat /sys/kernel/debug/usb/devices", and find the T-line which corresponds +to the device. Usually you do it by looking for the vendor string. If you have +many similar devices, unplug one and compare the two +/sys/kernel/debug/usb/devices outputs. The T-line will have a bus number. + +Example:: + + T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 + D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 + P: Vendor=0557 ProdID=2004 Rev= 1.00 + S: Manufacturer=ATEN + S: Product=UC100KM V2.00 + +"Bus=03" means it's bus 3. Alternatively, you can look at the output from +"lsusb" and get the bus number from the appropriate line. Example: + +Bus 003 Device 002: ID 0557:2004 ATEN UC100KM V2.00 + +3. Start 'cat' +-------------- + +:: + + # cat /sys/kernel/debug/usb/usbmon/3u > /tmp/1.mon.out + +to listen on a single bus, otherwise, to listen on all buses, type:: + + # cat /sys/kernel/debug/usb/usbmon/0u > /tmp/1.mon.out + +This process will read until it is killed. Naturally, the output can be +redirected to a desirable location. This is preferred, because it is going +to be quite long. + +4. Perform the desired operation on the USB bus +----------------------------------------------- + +This is where you do something that creates the traffic: plug in a flash key, +copy files, control a webcam, etc. + +5. Kill cat +----------- + +Usually it's done with a keyboard interrupt (Control-C). + +At this point the output file (/tmp/1.mon.out in this example) can be saved, +sent by e-mail, or inspected with a text editor. In the last case make sure +that the file size is not excessive for your favourite editor. + +Raw text data format +==================== + +Two formats are supported currently: the original, or '1t' format, and +the '1u' format. The '1t' format is deprecated in kernel 2.6.21. The '1u' +format adds a few fields, such as ISO frame descriptors, interval, etc. +It produces slightly longer lines, but otherwise is a perfect superset +of '1t' format. + +If it is desired to recognize one from the other in a program, look at the +"address" word (see below), where '1u' format adds a bus number. If 2 colons +are present, it's the '1t' format, otherwise '1u'. + +Any text format data consists of a stream of events, such as URB submission, +URB callback, submission error. Every event is a text line, which consists +of whitespace separated words. The number or position of words may depend +on the event type, but there is a set of words, common for all types. + +Here is the list of words, from left to right: + +- URB Tag. This is used to identify URBs, and is normally an in-kernel address + of the URB structure in hexadecimal, but can be a sequence number or any + other unique string, within reason. + +- Timestamp in microseconds, a decimal number. The timestamp's resolution + depends on available clock, and so it can be much worse than a microsecond + (if the implementation uses jiffies, for example). + +- Event Type. This type refers to the format of the event, not URB type. + Available types are: S - submission, C - callback, E - submission error. + +- "Address" word (formerly a "pipe"). It consists of four fields, separated by + colons: URB type and direction, Bus number, Device address, Endpoint number. + Type and direction are encoded with two bytes in the following manner: + + == == ============================= + Ci Co Control input and output + Zi Zo Isochronous input and output + Ii Io Interrupt input and output + Bi Bo Bulk input and output + == == ============================= + + Bus number, Device address, and Endpoint are decimal numbers, but they may + have leading zeros, for the sake of human readers. + +- URB Status word. This is either a letter, or several numbers separated + by colons: URB status, interval, start frame, and error count. Unlike the + "address" word, all fields save the status are optional. Interval is printed + only for interrupt and isochronous URBs. Start frame is printed only for + isochronous URBs. Error count is printed only for isochronous callback + events. + + The status field is a decimal number, sometimes negative, which represents + a "status" field of the URB. This field makes no sense for submissions, but + is present anyway to help scripts with parsing. When an error occurs, the + field contains the error code. + + In case of a submission of a Control packet, this field contains a Setup Tag + instead of an group of numbers. It is easy to tell whether the Setup Tag is + present because it is never a number. Thus if scripts find a set of numbers + in this word, they proceed to read Data Length (except for isochronous URBs). + If they find something else, like a letter, they read the setup packet before + reading the Data Length or isochronous descriptors. + +- Setup packet, if present, consists of 5 words: one of each for bmRequestType, + bRequest, wValue, wIndex, wLength, as specified by the USB Specification 2.0. + These words are safe to decode if Setup Tag was 's'. Otherwise, the setup + packet was present, but not captured, and the fields contain filler. + +- Number of isochronous frame descriptors and descriptors themselves. + If an Isochronous transfer event has a set of descriptors, a total number + of them in an URB is printed first, then a word per descriptor, up to a + total of 5. The word consists of 3 colon-separated decimal numbers for + status, offset, and length respectively. For submissions, initial length + is reported. For callbacks, actual length is reported. + +- Data Length. For submissions, this is the requested length. For callbacks, + this is the actual length. + +- Data tag. The usbmon may not always capture data, even if length is nonzero. + The data words are present only if this tag is '='. + +- Data words follow, in big endian hexadecimal format. Notice that they are + not machine words, but really just a byte stream split into words to make + it easier to read. Thus, the last word may contain from one to four bytes. + The length of collected data is limited and can be less than the data length + reported in the Data Length word. In the case of an Isochronous input (Zi) + completion where the received data is sparse in the buffer, the length of + the collected data can be greater than the Data Length value (because Data + Length counts only the bytes that were received whereas the Data words + contain the entire transfer buffer). + +Examples: + +An input control transfer to get a port status:: + + d5ea89a0 3575914555 S Ci:1:001:0 s a3 00 0000 0003 0004 4 < + d5ea89a0 3575914560 C Ci:1:001:0 0 4 = 01050000 + +An output bulk transfer to send a SCSI command 0x28 (READ_10) in a 31-byte +Bulk wrapper to a storage device at address 5:: + + dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 ad000000 00800000 80010a28 20000000 20000040 00000000 000000 + dd65f0e8 4128379808 C Bo:1:005:2 0 31 > + +Raw binary format and API +========================= + +The overall architecture of the API is about the same as the one above, +only the events are delivered in binary format. Each event is sent in +the following structure (its name is made up, so that we can refer to it):: + + struct usbmon_packet { + u64 id; /* 0: URB ID - from submission to callback */ + unsigned char type; /* 8: Same as text; extensible. */ + unsigned char xfer_type; /* ISO (0), Intr, Control, Bulk (3) */ + unsigned char epnum; /* Endpoint number and transfer direction */ + unsigned char devnum; /* Device address */ + u16 busnum; /* 12: Bus number */ + char flag_setup; /* 14: Same as text */ + char flag_data; /* 15: Same as text; Binary zero is OK. */ + s64 ts_sec; /* 16: gettimeofday */ + s32 ts_usec; /* 24: gettimeofday */ + int status; /* 28: */ + unsigned int length; /* 32: Length of data (submitted or actual) */ + unsigned int len_cap; /* 36: Delivered length */ + union { /* 40: */ + unsigned char setup[SETUP_LEN]; /* Only for Control S-type */ + struct iso_rec { /* Only for ISO */ + int error_count; + int numdesc; + } iso; + } s; + int interval; /* 48: Only for Interrupt and ISO */ + int start_frame; /* 52: For ISO */ + unsigned int xfer_flags; /* 56: copy of URB's transfer_flags */ + unsigned int ndesc; /* 60: Actual number of ISO descriptors */ + }; /* 64 total length */ + +These events can be received from a character device by reading with read(2), +with an ioctl(2), or by accessing the buffer with mmap. However, read(2) +only returns first 48 bytes for compatibility reasons. + +The character device is usually called /dev/usbmonN, where N is the USB bus +number. Number zero (/dev/usbmon0) is special and means "all buses". +Note that specific naming policy is set by your Linux distribution. + +If you create /dev/usbmon0 by hand, make sure that it is owned by root +and has mode 0600. Otherwise, unprivileged users will be able to snoop +keyboard traffic. + +The following ioctl calls are available, with MON_IOC_MAGIC 0x92: + + MON_IOCQ_URB_LEN, defined as _IO(MON_IOC_MAGIC, 1) + +This call returns the length of data in the next event. Note that majority of +events contain no data, so if this call returns zero, it does not mean that +no events are available. + + MON_IOCG_STATS, defined as _IOR(MON_IOC_MAGIC, 3, struct mon_bin_stats) + +The argument is a pointer to the following structure:: + + struct mon_bin_stats { + u32 queued; + u32 dropped; + }; + +The member "queued" refers to the number of events currently queued in the +buffer (and not to the number of events processed since the last reset). + +The member "dropped" is the number of events lost since the last call +to MON_IOCG_STATS. + + MON_IOCT_RING_SIZE, defined as _IO(MON_IOC_MAGIC, 4) + +This call sets the buffer size. The argument is the size in bytes. +The size may be rounded down to the next chunk (or page). If the requested +size is out of [unspecified] bounds for this kernel, the call fails with +-EINVAL. + + MON_IOCQ_RING_SIZE, defined as _IO(MON_IOC_MAGIC, 5) + +This call returns the current size of the buffer in bytes. + + MON_IOCX_GET, defined as _IOW(MON_IOC_MAGIC, 6, struct mon_get_arg) + MON_IOCX_GETX, defined as _IOW(MON_IOC_MAGIC, 10, struct mon_get_arg) + +These calls wait for events to arrive if none were in the kernel buffer, +then return the first event. The argument is a pointer to the following +structure:: + + struct mon_get_arg { + struct usbmon_packet *hdr; + void *data; + size_t alloc; /* Length of data (can be zero) */ + }; + +Before the call, hdr, data, and alloc should be filled. Upon return, the area +pointed by hdr contains the next event structure, and the data buffer contains +the data, if any. The event is removed from the kernel buffer. + +The MON_IOCX_GET copies 48 bytes to hdr area, MON_IOCX_GETX copies 64 bytes. + + MON_IOCX_MFETCH, defined as _IOWR(MON_IOC_MAGIC, 7, struct mon_mfetch_arg) + +This ioctl is primarily used when the application accesses the buffer +with mmap(2). Its argument is a pointer to the following structure:: + + struct mon_mfetch_arg { + uint32_t *offvec; /* Vector of events fetched */ + uint32_t nfetch; /* Number of events to fetch (out: fetched) */ + uint32_t nflush; /* Number of events to flush */ + }; + +The ioctl operates in 3 stages. + +First, it removes and discards up to nflush events from the kernel buffer. +The actual number of events discarded is returned in nflush. + +Second, it waits for an event to be present in the buffer, unless the pseudo- +device is open with O_NONBLOCK. + +Third, it extracts up to nfetch offsets into the mmap buffer, and stores +them into the offvec. The actual number of event offsets is stored into +the nfetch. + + MON_IOCH_MFLUSH, defined as _IO(MON_IOC_MAGIC, 8) + +This call removes a number of events from the kernel buffer. Its argument +is the number of events to remove. If the buffer contains fewer events +than requested, all events present are removed, and no error is reported. +This works when no events are available too. + + FIONBIO + +The ioctl FIONBIO may be implemented in the future, if there's a need. + +In addition to ioctl(2) and read(2), the special file of binary API can +be polled with select(2) and poll(2). But lseek(2) does not work. + +* Memory-mapped access of the kernel buffer for the binary API + +The basic idea is simple: + +To prepare, map the buffer by getting the current size, then using mmap(2). +Then, execute a loop similar to the one written in pseudo-code below:: + + struct mon_mfetch_arg fetch; + struct usbmon_packet *hdr; + int nflush = 0; + for (;;) { + fetch.offvec = vec; // Has N 32-bit words + fetch.nfetch = N; // Or less than N + fetch.nflush = nflush; + ioctl(fd, MON_IOCX_MFETCH, &fetch); // Process errors, too + nflush = fetch.nfetch; // This many packets to flush when done + for (i = 0; i < nflush; i++) { + hdr = (struct ubsmon_packet *) &mmap_area[vec[i]]; + if (hdr->type == '@') // Filler packet + continue; + caddr_t data = &mmap_area[vec[i]] + 64; + process_packet(hdr, data); + } + } + +Thus, the main idea is to execute only one ioctl per N events. + +Although the buffer is circular, the returned headers and data do not cross +the end of the buffer, so the above pseudo-code does not need any gathering. diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt deleted file mode 100644 index b0bd51080799..000000000000 --- a/Documentation/usb/usbmon.txt +++ /dev/null @@ -1,375 +0,0 @@ -====== -usbmon -====== - -Introduction -============ - -The name "usbmon" in lowercase refers to a facility in kernel which is -used to collect traces of I/O on the USB bus. This function is analogous -to a packet socket used by network monitoring tools such as tcpdump(1) -or Ethereal. Similarly, it is expected that a tool such as usbdump or -USBMon (with uppercase letters) is used to examine raw traces produced -by usbmon. - -The usbmon reports requests made by peripheral-specific drivers to Host -Controller Drivers (HCD). So, if HCD is buggy, the traces reported by -usbmon may not correspond to bus transactions precisely. This is the same -situation as with tcpdump. - -Two APIs are currently implemented: "text" and "binary". The binary API -is available through a character device in /dev namespace and is an ABI. -The text API is deprecated since 2.6.35, but available for convenience. - -How to use usbmon to collect raw text traces -============================================ - -Unlike the packet socket, usbmon has an interface which provides traces -in a text format. This is used for two purposes. First, it serves as a -common trace exchange format for tools while more sophisticated formats -are finalized. Second, humans can read it in case tools are not available. - -To collect a raw text trace, execute following steps. - -1. Prepare ----------- - -Mount debugfs (it has to be enabled in your kernel configuration), and -load the usbmon module (if built as module). The second step is skipped -if usbmon is built into the kernel:: - - # mount -t debugfs none_debugs /sys/kernel/debug - # modprobe usbmon - # - -Verify that bus sockets are present: - - # ls /sys/kernel/debug/usb/usbmon - 0s 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u - # - -Now you can choose to either use the socket '0u' (to capture packets on all -buses), and skip to step #3, or find the bus used by your device with step #2. -This allows to filter away annoying devices that talk continuously. - -2. Find which bus connects to the desired device ------------------------------------------------- - -Run "cat /sys/kernel/debug/usb/devices", and find the T-line which corresponds -to the device. Usually you do it by looking for the vendor string. If you have -many similar devices, unplug one and compare the two -/sys/kernel/debug/usb/devices outputs. The T-line will have a bus number. - -Example:: - - T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 - D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 - P: Vendor=0557 ProdID=2004 Rev= 1.00 - S: Manufacturer=ATEN - S: Product=UC100KM V2.00 - -"Bus=03" means it's bus 3. Alternatively, you can look at the output from -"lsusb" and get the bus number from the appropriate line. Example: - -Bus 003 Device 002: ID 0557:2004 ATEN UC100KM V2.00 - -3. Start 'cat' --------------- - -:: - - # cat /sys/kernel/debug/usb/usbmon/3u > /tmp/1.mon.out - -to listen on a single bus, otherwise, to listen on all buses, type:: - - # cat /sys/kernel/debug/usb/usbmon/0u > /tmp/1.mon.out - -This process will read until it is killed. Naturally, the output can be -redirected to a desirable location. This is preferred, because it is going -to be quite long. - -4. Perform the desired operation on the USB bus ------------------------------------------------ - -This is where you do something that creates the traffic: plug in a flash key, -copy files, control a webcam, etc. - -5. Kill cat ------------ - -Usually it's done with a keyboard interrupt (Control-C). - -At this point the output file (/tmp/1.mon.out in this example) can be saved, -sent by e-mail, or inspected with a text editor. In the last case make sure -that the file size is not excessive for your favourite editor. - -Raw text data format -==================== - -Two formats are supported currently: the original, or '1t' format, and -the '1u' format. The '1t' format is deprecated in kernel 2.6.21. The '1u' -format adds a few fields, such as ISO frame descriptors, interval, etc. -It produces slightly longer lines, but otherwise is a perfect superset -of '1t' format. - -If it is desired to recognize one from the other in a program, look at the -"address" word (see below), where '1u' format adds a bus number. If 2 colons -are present, it's the '1t' format, otherwise '1u'. - -Any text format data consists of a stream of events, such as URB submission, -URB callback, submission error. Every event is a text line, which consists -of whitespace separated words. The number or position of words may depend -on the event type, but there is a set of words, common for all types. - -Here is the list of words, from left to right: - -- URB Tag. This is used to identify URBs, and is normally an in-kernel address - of the URB structure in hexadecimal, but can be a sequence number or any - other unique string, within reason. - -- Timestamp in microseconds, a decimal number. The timestamp's resolution - depends on available clock, and so it can be much worse than a microsecond - (if the implementation uses jiffies, for example). - -- Event Type. This type refers to the format of the event, not URB type. - Available types are: S - submission, C - callback, E - submission error. - -- "Address" word (formerly a "pipe"). It consists of four fields, separated by - colons: URB type and direction, Bus number, Device address, Endpoint number. - Type and direction are encoded with two bytes in the following manner: - - == == ============================= - Ci Co Control input and output - Zi Zo Isochronous input and output - Ii Io Interrupt input and output - Bi Bo Bulk input and output - == == ============================= - - Bus number, Device address, and Endpoint are decimal numbers, but they may - have leading zeros, for the sake of human readers. - -- URB Status word. This is either a letter, or several numbers separated - by colons: URB status, interval, start frame, and error count. Unlike the - "address" word, all fields save the status are optional. Interval is printed - only for interrupt and isochronous URBs. Start frame is printed only for - isochronous URBs. Error count is printed only for isochronous callback - events. - - The status field is a decimal number, sometimes negative, which represents - a "status" field of the URB. This field makes no sense for submissions, but - is present anyway to help scripts with parsing. When an error occurs, the - field contains the error code. - - In case of a submission of a Control packet, this field contains a Setup Tag - instead of an group of numbers. It is easy to tell whether the Setup Tag is - present because it is never a number. Thus if scripts find a set of numbers - in this word, they proceed to read Data Length (except for isochronous URBs). - If they find something else, like a letter, they read the setup packet before - reading the Data Length or isochronous descriptors. - -- Setup packet, if present, consists of 5 words: one of each for bmRequestType, - bRequest, wValue, wIndex, wLength, as specified by the USB Specification 2.0. - These words are safe to decode if Setup Tag was 's'. Otherwise, the setup - packet was present, but not captured, and the fields contain filler. - -- Number of isochronous frame descriptors and descriptors themselves. - If an Isochronous transfer event has a set of descriptors, a total number - of them in an URB is printed first, then a word per descriptor, up to a - total of 5. The word consists of 3 colon-separated decimal numbers for - status, offset, and length respectively. For submissions, initial length - is reported. For callbacks, actual length is reported. - -- Data Length. For submissions, this is the requested length. For callbacks, - this is the actual length. - -- Data tag. The usbmon may not always capture data, even if length is nonzero. - The data words are present only if this tag is '='. - -- Data words follow, in big endian hexadecimal format. Notice that they are - not machine words, but really just a byte stream split into words to make - it easier to read. Thus, the last word may contain from one to four bytes. - The length of collected data is limited and can be less than the data length - reported in the Data Length word. In the case of an Isochronous input (Zi) - completion where the received data is sparse in the buffer, the length of - the collected data can be greater than the Data Length value (because Data - Length counts only the bytes that were received whereas the Data words - contain the entire transfer buffer). - -Examples: - -An input control transfer to get a port status:: - - d5ea89a0 3575914555 S Ci:1:001:0 s a3 00 0000 0003 0004 4 < - d5ea89a0 3575914560 C Ci:1:001:0 0 4 = 01050000 - -An output bulk transfer to send a SCSI command 0x28 (READ_10) in a 31-byte -Bulk wrapper to a storage device at address 5:: - - dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 ad000000 00800000 80010a28 20000000 20000040 00000000 000000 - dd65f0e8 4128379808 C Bo:1:005:2 0 31 > - -Raw binary format and API -========================= - -The overall architecture of the API is about the same as the one above, -only the events are delivered in binary format. Each event is sent in -the following structure (its name is made up, so that we can refer to it):: - - struct usbmon_packet { - u64 id; /* 0: URB ID - from submission to callback */ - unsigned char type; /* 8: Same as text; extensible. */ - unsigned char xfer_type; /* ISO (0), Intr, Control, Bulk (3) */ - unsigned char epnum; /* Endpoint number and transfer direction */ - unsigned char devnum; /* Device address */ - u16 busnum; /* 12: Bus number */ - char flag_setup; /* 14: Same as text */ - char flag_data; /* 15: Same as text; Binary zero is OK. */ - s64 ts_sec; /* 16: gettimeofday */ - s32 ts_usec; /* 24: gettimeofday */ - int status; /* 28: */ - unsigned int length; /* 32: Length of data (submitted or actual) */ - unsigned int len_cap; /* 36: Delivered length */ - union { /* 40: */ - unsigned char setup[SETUP_LEN]; /* Only for Control S-type */ - struct iso_rec { /* Only for ISO */ - int error_count; - int numdesc; - } iso; - } s; - int interval; /* 48: Only for Interrupt and ISO */ - int start_frame; /* 52: For ISO */ - unsigned int xfer_flags; /* 56: copy of URB's transfer_flags */ - unsigned int ndesc; /* 60: Actual number of ISO descriptors */ - }; /* 64 total length */ - -These events can be received from a character device by reading with read(2), -with an ioctl(2), or by accessing the buffer with mmap. However, read(2) -only returns first 48 bytes for compatibility reasons. - -The character device is usually called /dev/usbmonN, where N is the USB bus -number. Number zero (/dev/usbmon0) is special and means "all buses". -Note that specific naming policy is set by your Linux distribution. - -If you create /dev/usbmon0 by hand, make sure that it is owned by root -and has mode 0600. Otherwise, unprivileged users will be able to snoop -keyboard traffic. - -The following ioctl calls are available, with MON_IOC_MAGIC 0x92: - - MON_IOCQ_URB_LEN, defined as _IO(MON_IOC_MAGIC, 1) - -This call returns the length of data in the next event. Note that majority of -events contain no data, so if this call returns zero, it does not mean that -no events are available. - - MON_IOCG_STATS, defined as _IOR(MON_IOC_MAGIC, 3, struct mon_bin_stats) - -The argument is a pointer to the following structure:: - - struct mon_bin_stats { - u32 queued; - u32 dropped; - }; - -The member "queued" refers to the number of events currently queued in the -buffer (and not to the number of events processed since the last reset). - -The member "dropped" is the number of events lost since the last call -to MON_IOCG_STATS. - - MON_IOCT_RING_SIZE, defined as _IO(MON_IOC_MAGIC, 4) - -This call sets the buffer size. The argument is the size in bytes. -The size may be rounded down to the next chunk (or page). If the requested -size is out of [unspecified] bounds for this kernel, the call fails with --EINVAL. - - MON_IOCQ_RING_SIZE, defined as _IO(MON_IOC_MAGIC, 5) - -This call returns the current size of the buffer in bytes. - - MON_IOCX_GET, defined as _IOW(MON_IOC_MAGIC, 6, struct mon_get_arg) - MON_IOCX_GETX, defined as _IOW(MON_IOC_MAGIC, 10, struct mon_get_arg) - -These calls wait for events to arrive if none were in the kernel buffer, -then return the first event. The argument is a pointer to the following -structure:: - - struct mon_get_arg { - struct usbmon_packet *hdr; - void *data; - size_t alloc; /* Length of data (can be zero) */ - }; - -Before the call, hdr, data, and alloc should be filled. Upon return, the area -pointed by hdr contains the next event structure, and the data buffer contains -the data, if any. The event is removed from the kernel buffer. - -The MON_IOCX_GET copies 48 bytes to hdr area, MON_IOCX_GETX copies 64 bytes. - - MON_IOCX_MFETCH, defined as _IOWR(MON_IOC_MAGIC, 7, struct mon_mfetch_arg) - -This ioctl is primarily used when the application accesses the buffer -with mmap(2). Its argument is a pointer to the following structure:: - - struct mon_mfetch_arg { - uint32_t *offvec; /* Vector of events fetched */ - uint32_t nfetch; /* Number of events to fetch (out: fetched) */ - uint32_t nflush; /* Number of events to flush */ - }; - -The ioctl operates in 3 stages. - -First, it removes and discards up to nflush events from the kernel buffer. -The actual number of events discarded is returned in nflush. - -Second, it waits for an event to be present in the buffer, unless the pseudo- -device is open with O_NONBLOCK. - -Third, it extracts up to nfetch offsets into the mmap buffer, and stores -them into the offvec. The actual number of event offsets is stored into -the nfetch. - - MON_IOCH_MFLUSH, defined as _IO(MON_IOC_MAGIC, 8) - -This call removes a number of events from the kernel buffer. Its argument -is the number of events to remove. If the buffer contains fewer events -than requested, all events present are removed, and no error is reported. -This works when no events are available too. - - FIONBIO - -The ioctl FIONBIO may be implemented in the future, if there's a need. - -In addition to ioctl(2) and read(2), the special file of binary API can -be polled with select(2) and poll(2). But lseek(2) does not work. - -* Memory-mapped access of the kernel buffer for the binary API - -The basic idea is simple: - -To prepare, map the buffer by getting the current size, then using mmap(2). -Then, execute a loop similar to the one written in pseudo-code below:: - - struct mon_mfetch_arg fetch; - struct usbmon_packet *hdr; - int nflush = 0; - for (;;) { - fetch.offvec = vec; // Has N 32-bit words - fetch.nfetch = N; // Or less than N - fetch.nflush = nflush; - ioctl(fd, MON_IOCX_MFETCH, &fetch); // Process errors, too - nflush = fetch.nfetch; // This many packets to flush when done - for (i = 0; i < nflush; i++) { - hdr = (struct ubsmon_packet *) &mmap_area[vec[i]]; - if (hdr->type == '@') // Filler packet - continue; - caddr_t data = &mmap_area[vec[i]] + 64; - process_packet(hdr, data); - } - } - -Thus, the main idea is to execute only one ioctl per N events. - -Although the buffer is circular, the returned headers and data do not cross -the end of the buffer, so the above pseudo-code does not need any gathering. diff --git a/Documentation/usb/wusb-design-overview.rst b/Documentation/usb/wusb-design-overview.rst new file mode 100644 index 000000000000..dc5e21609bb5 --- /dev/null +++ b/Documentation/usb/wusb-design-overview.rst @@ -0,0 +1,457 @@ +================================ +Linux UWB + Wireless USB + WiNET +================================ + + Copyright (C) 2005-2006 Intel Corporation + + Inaky Perez-Gonzalez + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License version + 2 as published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. + + +Please visit http://bughost.org/thewiki/Design-overview.txt-1.8 for +updated content. + + * Design-overview.txt-1.8 + +This code implements a Ultra Wide Band stack for Linux, as well as +drivers for the USB based UWB radio controllers defined in the +Wireless USB 1.0 specification (including Wireless USB host controller +and an Intel WiNET controller). + +.. Contents + 1. Introduction + 1. HWA: Host Wire adapters, your Wireless USB dongle + + 2. DWA: Device Wired Adaptor, a Wireless USB hub for wired + devices + 3. WHCI: Wireless Host Controller Interface, the PCI WUSB host + adapter + 2. The UWB stack + 1. Devices and hosts: the basic structure + + 2. Host Controller life cycle + + 3. On the air: beacons and enumerating the radio neighborhood + + 4. Device lists + 5. Bandwidth allocation + + 3. Wireless USB Host Controller drivers + + 4. Glossary + + +Introduction +============ + +UWB is a wide-band communication protocol that is to serve also as the +low-level protocol for others (much like TCP sits on IP). Currently +these others are Wireless USB and TCP/IP, but seems Bluetooth and +Firewire/1394 are coming along. + +UWB uses a band from roughly 3 to 10 GHz, transmitting at a max of +~-41dB (or 0.074 uW/MHz--geography specific data is still being +negotiated w/ regulators, so watch for changes). That band is divided in +a bunch of ~1.5 GHz wide channels (or band groups) composed of three +subbands/subchannels (528 MHz each). Each channel is independent of each +other, so you could consider them different "busses". Initially this +driver considers them all a single one. + +Radio time is divided in 65536 us long /superframes/, each one divided +in 256 256us long /MASs/ (Media Allocation Slots), which are the basic +time/media allocation units for transferring data. At the beginning of +each superframe there is a Beacon Period (BP), where every device +transmit its beacon on a single MAS. The length of the BP depends on how +many devices are present and the length of their beacons. + +Devices have a MAC (fixed, 48 bit address) and a device (changeable, 16 +bit address) and send periodic beacons to advertise themselves and pass +info on what they are and do. They advertise their capabilities and a +bunch of other stuff. + +The different logical parts of this driver are: + + * + + *UWB*: the Ultra-Wide-Band stack -- manages the radio and + associated spectrum to allow for devices sharing it. Allows to + control bandwidth assignment, beaconing, scanning, etc + + * + + *WUSB*: the layer that sits on top of UWB to provide Wireless USB. + The Wireless USB spec defines means to control a UWB radio and to + do the actual WUSB. + + +HWA: Host Wire adapters, your Wireless USB dongle +------------------------------------------------- + +WUSB also defines a device called a Host Wire Adaptor (HWA), which in +mere terms is a USB dongle that enables your PC to have UWB and Wireless +USB. The Wireless USB Host Controller in a HWA looks to the host like a +[Wireless] USB controller connected via USB (!) + +The HWA itself is broken in two or three main interfaces: + + * + + *RC*: Radio control -- this implements an interface to the + Ultra-Wide-Band radio controller. The driver for this implements a + USB-based UWB Radio Controller to the UWB stack. + + * + + *HC*: the wireless USB host controller. It looks like a USB host + whose root port is the radio and the WUSB devices connect to it. + To the system it looks like a separate USB host. The driver (will) + implement a USB host controller (similar to UHCI, OHCI or EHCI) + for which the root hub is the radio...To reiterate: it is a USB + controller that is connected via USB instead of PCI. + + * + + *WINET*: some HW provide a WiNET interface (IP over UWB). This + package provides a driver for it (it looks like a network + interface, winetX). The driver detects when there is a link up for + their type and kick into gear. + + +DWA: Device Wired Adaptor, a Wireless USB hub for wired devices +--------------------------------------------------------------- + +These are the complement to HWAs. They are a USB host for connecting +wired devices, but it is connected to your PC connected via Wireless +USB. To the system it looks like yet another USB host. To the untrained +eye, it looks like a hub that connects upstream wirelessly. + +We still offer no support for this; however, it should share a lot of +code with the HWA-RC driver; there is a bunch of factorization work that +has been done to support that in upcoming releases. + + +WHCI: Wireless Host Controller Interface, the PCI WUSB host adapter +------------------------------------------------------------------- + +This is your usual PCI device that implements WHCI. Similar in concept +to EHCI, it allows your wireless USB devices (including DWAs) to connect +to your host via a PCI interface. As in the case of the HWA, it has a +Radio Control interface and the WUSB Host Controller interface per se. + +There is still no driver support for this, but will be in upcoming +releases. + + +The UWB stack +============= + +The main mission of the UWB stack is to keep a tally of which devices +are in radio proximity to allow drivers to connect to them. As well, it +provides an API for controlling the local radio controllers (RCs from +now on), such as to start/stop beaconing, scan, allocate bandwidth, etc. + + +Devices and hosts: the basic structure +-------------------------------------- + +The main building block here is the UWB device (struct uwb_dev). For +each device that pops up in radio presence (ie: the UWB host receives a +beacon from it) you get a struct uwb_dev that will show up in +/sys/bus/uwb/devices. + +For each RC that is detected, a new struct uwb_rc and struct uwb_dev are +created. An entry is also created in /sys/class/uwb_rc for each RC. + +Each RC driver is implemented by a separate driver that plugs into the +interface that the UWB stack provides through a struct uwb_rc_ops. The +spec creators have been nice enough to make the message format the same +for HWA and WHCI RCs, so the driver is really a very thin transport that +moves the requests from the UWB API to the device [/uwb_rc_ops->cmd()/] +and sends the replies and notifications back to the API +[/uwb_rc_neh_grok()/]. Notifications are handled to the UWB daemon, that +is chartered, among other things, to keep the tab of how the UWB radio +neighborhood looks, creating and destroying devices as they show up or +disappear. + +Command execution is very simple: a command block is sent and a event +block or reply is expected back. For sending/receiving command/events, a +handle called /neh/ (Notification/Event Handle) is opened with +/uwb_rc_neh_open()/. + +The HWA-RC (USB dongle) driver (drivers/uwb/hwa-rc.c) does this job for +the USB connected HWA. Eventually, drivers/whci-rc.c will do the same +for the PCI connected WHCI controller. + + +Host Controller life cycle +-------------------------- + +So let's say we connect a dongle to the system: it is detected and +firmware uploaded if needed [for Intel's i1480 +/drivers/uwb/ptc/usb.c:ptc_usb_probe()/] and then it is reenumerated. +Now we have a real HWA device connected and +/drivers/uwb/hwa-rc.c:hwarc_probe()/ picks it up, that will set up the +Wire-Adaptor environment and then suck it into the UWB stack's vision of +the world [/drivers/uwb/lc-rc.c:uwb_rc_add()/]. + + * + + [*] The stack should put a new RC to scan for devices + [/uwb_rc_scan()/] so it finds what's available around and tries to + connect to them, but this is policy stuff and should be driven + from user space. As of now, the operator is expected to do it + manually; see the release notes for documentation on the procedure. + +When a dongle is disconnected, /drivers/uwb/hwa-rc.c:hwarc_disconnect()/ +takes time of tearing everything down safely (or not...). + + +On the air: beacons and enumerating the radio neighborhood +---------------------------------------------------------- + +So assuming we have devices and we have agreed for a channel to connect +on (let's say 9), we put the new RC to beacon: + + * + + $ echo 9 0 > /sys/class/uwb_rc/uwb0/beacon + +Now it is visible. If there were other devices in the same radio channel +and beacon group (that's what the zero is for), the dongle's radio +control interface will send beacon notifications on its +notification/event endpoint (NEEP). The beacon notifications are part of +the event stream that is funneled into the API with +/drivers/uwb/neh.c:uwb_rc_neh_grok()/ and delivered to the UWBD, the UWB +daemon through a notification list. + +UWBD wakes up and scans the event list; finds a beacon and adds it to +the BEACON CACHE (/uwb_beca/). If he receives a number of beacons from +the same device, he considers it to be 'onair' and creates a new device +[/drivers/uwb/lc-dev.c:uwbd_dev_onair()/]. Similarly, when no beacons +are received in some time, the device is considered gone and wiped out +[uwbd calls periodically /uwb/beacon.c:uwb_beca_purge()/ that will purge +the beacon cache of dead devices]. + + +Device lists +------------ + +All UWB devices are kept in the list of the struct bus_type uwb_bus_type. + + +Bandwidth allocation +-------------------- + +The UWB stack maintains a local copy of DRP availability through +processing of incoming *DRP Availability Change* notifications. This +local copy is currently used to present the current bandwidth +availability to the user through the sysfs file +/sys/class/uwb_rc/uwbx/bw_avail. In the future the bandwidth +availability information will be used by the bandwidth reservation +routines. + +The bandwidth reservation routines are in progress and are thus not +present in the current release. When completed they will enable a user +to initiate DRP reservation requests through interaction with sysfs. DRP +reservation requests from remote UWB devices will also be handled. The +bandwidth management done by the UWB stack will include callbacks to the +higher layers will enable the higher layers to use the reservations upon +completion. [Note: The bandwidth reservation work is in progress and +subject to change.] + + +Wireless USB Host Controller drivers +==================================== + +*WARNING* This section needs a lot of work! + +As explained above, there are three different types of HCs in the WUSB +world: HWA-HC, DWA-HC and WHCI-HC. + +HWA-HC and DWA-HC share that they are Wire-Adapters (USB or WUSB +connected controllers), and their transfer management system is almost +identical. So is their notification delivery system. + +HWA-HC and WHCI-HC share that they are both WUSB host controllers, so +they have to deal with WUSB device life cycle and maintenance, wireless +root-hub + +HWA exposes a Host Controller interface (HWA-HC 0xe0/02/02). This has +three endpoints (Notifications, Data Transfer In and Data Transfer +Out--known as NEP, DTI and DTO in the code). + +We reserve UWB bandwidth for our Wireless USB Cluster, create a Cluster +ID and tell the HC to use all that. Then we start it. This means the HC +starts sending MMCs. + + * + + The MMCs are blocks of data defined somewhere in the WUSB1.0 spec + that define a stream in the UWB channel time allocated for sending + WUSB IEs (host to device commands/notifications) and Device + Notifications (device initiated to host). Each host defines a + unique Wireless USB cluster through MMCs. Devices can connect to a + single cluster at the time. The IEs are Information Elements, and + among them are the bandwidth allocations that tell each device + when can they transmit or receive. + +Now it all depends on external stimuli. + +New device connection +--------------------- + +A new device pops up, it scans the radio looking for MMCs that give out +the existence of Wireless USB channels. Once one (or more) are found, +selects which one to connect to. Sends a /DN_Connect/ (device +notification connect) during the DNTS (Device Notification Time +Slot--announced in the MMCs + +HC picks the /DN_Connect/ out (nep module sends to notif.c for delivery +into /devconnect/). This process starts the authentication process for +the device. First we allocate a /fake port/ and assign an +unauthenticated address (128 to 255--what we really do is +0x80 | fake_port_idx). We fiddle with the fake port status and /hub_wq/ +sees a new connection, so he moves on to enable the fake port with a reset. + +So now we are in the reset path -- we know we have a non-yet enumerated +device with an unauthorized address; we ask user space to authenticate +(FIXME: not yet done, similar to bluetooth pairing), then we do the key +exchange (FIXME: not yet done) and issue a /set address 0/ to bring the +device to the default state. Device is authenticated. + +From here, the USB stack takes control through the usb_hcd ops. hub_wq +has seen the port status changes, as we have been toggling them. It will +start enumerating and doing transfers through usb_hcd->urb_enqueue() to +read descriptors and move our data. + +Device life cycle and keep alives +--------------------------------- + +Every time there is a successful transfer to/from a device, we update a +per-device activity timestamp. If not, every now and then we check and +if the activity timestamp gets old, we ping the device by sending it a +Keep Alive IE; it responds with a /DN_Alive/ pong during the DNTS (this +arrives to us as a notification through +devconnect.c:wusb_handle_dn_alive(). If a device times out, we +disconnect it from the system (cleaning up internal information and +toggling the bits in the fake hub port, which kicks hub_wq into removing +the rest of the stuff). + +This is done through devconnect:__wusb_check_devs(), which will scan the +device list looking for whom needs refreshing. + +If the device wants to disconnect, it will either die (ugly) or send a +/DN_Disconnect/ that will prompt a disconnection from the system. + +Sending and receiving data +-------------------------- + +Data is sent and received through /Remote Pipes/ (rpipes). An rpipe is +/aimed/ at an endpoint in a WUSB device. This is the same for HWAs and +DWAs. + +Each HC has a number of rpipes and buffers that can be assigned to them; +when doing a data transfer (xfer), first the rpipe has to be aimed and +prepared (buffers assigned), then we can start queueing requests for +data in or out. + +Data buffers have to be segmented out before sending--so we send first a +header (segment request) and then if there is any data, a data buffer +immediately after to the DTI interface (yep, even the request). If our +buffer is bigger than the max segment size, then we just do multiple +requests. + +[This sucks, because doing USB scatter gatter in Linux is resource +intensive, if any...not that the current approach is not. It just has to +be cleaned up a lot :)]. + +If reading, we don't send data buffers, just the segment headers saying +we want to read segments. + +When the xfer is executed, we receive a notification that says data is +ready in the DTI endpoint (handled through +xfer.c:wa_handle_notif_xfer()). In there we read from the DTI endpoint a +descriptor that gives us the status of the transfer, its identification +(given when we issued it) and the segment number. If it was a data read, +we issue another URB to read into the destination buffer the chunk of +data coming out of the remote endpoint. Done, wait for the next guy. The +callbacks for the URBs issued from here are the ones that will declare +the xfer complete at some point and call its callback. + +Seems simple, but the implementation is not trivial. + + * + + *WARNING* Old!! + +The main xfer descriptor, wa_xfer (equivalent to a URB) contains an +array of segments, tallys on segments and buffers and callback +information. Buried in there is a lot of URBs for executing the segments +and buffer transfers. + +For OUT xfers, there is an array of segments, one URB for each, another +one of buffer URB. When submitting, we submit URBs for segment request +1, buffer 1, segment 2, buffer 2...etc. Then we wait on the DTI for xfer +result data; when all the segments are complete, we call the callback to +finalize the transfer. + +For IN xfers, we only issue URBs for the segments we want to read and +then wait for the xfer result data. + +URB mapping into xfers +^^^^^^^^^^^^^^^^^^^^^^ + +This is done by hwahc_op_urb_[en|de]queue(). In enqueue() we aim an +rpipe to the endpoint where we have to transmit, create a transfer +context (wa_xfer) and submit it. When the xfer is done, our callback is +called and we assign the status bits and release the xfer resources. + +In dequeue() we are basically cancelling/aborting the transfer. We issue +a xfer abort request to the HC, cancel all the URBs we had submitted +and not yet done and when all that is done, the xfer callback will be +called--this will call the URB callback. + + +Glossary +======== + +*DWA* -- Device Wire Adapter + +USB host, wired for downstream devices, upstream connects wirelessly +with Wireless USB. + +*EVENT* -- Response to a command on the NEEP + +*HWA* -- Host Wire Adapter / USB dongle for UWB and Wireless USB + +*NEH* -- Notification/Event Handle + +Handle/file descriptor for receiving notifications or events. The WA +code requires you to get one of this to listen for notifications or +events on the NEEP. + +*NEEP* -- Notification/Event EndPoint + +Stuff related to the management of the first endpoint of a HWA USB +dongle that is used to deliver an stream of events and notifications to +the host. + +*NOTIFICATION* -- Message coming in the NEEP as response to something. + +*RC* -- Radio Control + +Design-overview.txt-1.8 (last edited 2006-11-04 12:22:24 by +InakyPerezGonzalez) -- cgit v1.2.3