From e892b75ff579a0c07b633f2e234aeecf78a93a37 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 27 May 2015 16:17:19 -0700 Subject: hwmon: (atxp1) Drop auto-detection Auto-detection for this chip is highly unreliable, and one of its I2C addresses can also be used by EEPROMs, increasing the risk for false positives even more. Drop auto-detection entirely to remove the risk. Reviewed-by: Jean Delvare Signed-off-by: Guenter Roeck --- drivers/hwmon/atxp1.c | 55 +++++++++------------------------------------------ 1 file changed, 9 insertions(+), 46 deletions(-) diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c index 78edc56b59e5..f2f2f2fc755a 100644 --- a/drivers/hwmon/atxp1.c +++ b/drivers/hwmon/atxp1.c @@ -11,6 +11,10 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. + * + * The ATXP1 can reside on I2C addresses 0x37 or 0x4e. The chip is + * not auto-detected by the driver and must be instantiated explicitly. + * See Documentation/i2c/instantiating-devices for more information. */ #include @@ -38,8 +42,6 @@ MODULE_AUTHOR("Sebastian Witt "); #define ATXP1_VIDMASK 0x1f #define ATXP1_GPIO1MASK 0x0f -static const unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END }; - struct atxp1_data { struct i2c_client *client; struct mutex update_lock; @@ -254,48 +256,6 @@ static struct attribute *atxp1_attrs[] = { }; ATTRIBUTE_GROUPS(atxp1); -/* Return 0 if detection is successful, -ENODEV otherwise */ -static int atxp1_detect(struct i2c_client *new_client, - struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = new_client->adapter; - - u8 temp; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return -ENODEV; - - /* Detect ATXP1, checking if vendor ID registers are all zero */ - if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) && - (i2c_smbus_read_byte_data(new_client, 0x3f) == 0) && - (i2c_smbus_read_byte_data(new_client, 0xfe) == 0) && - (i2c_smbus_read_byte_data(new_client, 0xff) == 0))) - return -ENODEV; - - /* - * No vendor ID, now checking if registers 0x10,0x11 (non-existent) - * showing the same as register 0x00 - */ - temp = i2c_smbus_read_byte_data(new_client, 0x00); - - if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) && - (i2c_smbus_read_byte_data(new_client, 0x11) == temp))) - return -ENODEV; - - /* Get VRM */ - temp = vid_which_vrm(); - - if ((temp != 90) && (temp != 91)) { - dev_err(&adapter->dev, "atxp1: Not supporting VRM %d.%d\n", - temp / 10, temp % 10); - return -ENODEV; - } - - strlcpy(info->type, "atxp1", I2C_NAME_SIZE); - - return 0; -} - static int atxp1_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -309,6 +269,11 @@ static int atxp1_probe(struct i2c_client *client, /* Get VRM */ data->vrm = vid_which_vrm(); + if (data->vrm != 90 && data->vrm != 91) { + dev_err(dev, "atxp1: Not supporting VRM %d.%d\n", + data->vrm / 10, data->vrm % 10); + return -ENODEV; + } data->client = client; mutex_init(&data->update_lock); @@ -337,8 +302,6 @@ static struct i2c_driver atxp1_driver = { }, .probe = atxp1_probe, .id_table = atxp1_id, - .detect = atxp1_detect, - .address_list = normal_i2c, }; module_i2c_driver(atxp1_driver); -- cgit v1.2.3