| Age | Commit message (Collapse) | Author |
|---|
|
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 4730f4a6c6b2 ("IB/hfi1: Activate the dummy netdev")
Link: https://lore.kernel.org/r/1605249747-17942-1-git-send-email-zhangchangzhong@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Use netdev->tstats instead of a member of hfi1_ipoib_dev_priv for storing
a pointer to the per-cpu counters. This allows us to use core
functionality for statistics handling.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A return statement is omitted after getting HEM table, then the newly
allocated pointer will be freed directly, which will cause a calltrace
when the driver was removed.
Fixes: d6d91e46210f ("RDMA/hns: Add support for configuring GMV table")
Link: https://lore.kernel.org/r/1605180582-46504-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
RDMA ULPs must not call DMA mapping APIs directly but instead use the
ib_dma_* wrappers.
Fixes: 0c16d9635e3a ("RDMA/umem: Move to allocate SG table from pages")
Link: https://lore.kernel.org/r/20201106181941.1878556-3-hch@lst.de
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
dma_virt_ops requires that all pages have a kernel virtual address.
Introduce a INFINIBAND_VIRT_DMA Kconfig symbol that depends on !HIGHMEM
and make all three drivers depend on the new symbol.
Also remove the ARCH_DMA_ADDR_T_64BIT dependency, which has been obsolete
since commit 4965a68780c5 ("arch: define the ARCH_DMA_ADDR_T_64BIT config
symbol in lib/Kconfig")
Fixes: 551199aca1c3 ("lib/dma-virt: Add dma_virt_ops")
Link: https://lore.kernel.org/r/20201106181941.1878556-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix missing kfree in pvrdma_register_device() when failure from
ib_device_set_netdev().
Fixes: 4b38da75e089 ("RDMA/drivers: Convert easy drivers to use ib_device_set_netdev()")
Link: https://lore.kernel.org/r/20201111032202.17925-1-miaoqinglang@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
gcc points out a suspicious mixing of enum types in a function that
converts from MTHCA_OPCODE_* values to IB_WC_* values:
drivers/infiniband/hw/mthca/mthca_cq.c: In function 'mthca_poll_one':
drivers/infiniband/hw/mthca/mthca_cq.c:607:21: warning: implicit conversion from 'enum <anonymous>' to 'enum ib_wc_opcode' [-Wenum-conversion]
607 | entry->opcode = MTHCA_OPCODE_INVALID;
Nothing seems to ever check for MTHCA_OPCODE_INVALID again, no idea if
this is meaningful, but it seems harmless as it deals with an invalid
input.
Remove MTHCA_OPCODE_INVALID and set the ib_wc_opcode to 0xFF, which is
still bogus, but at least doesn't make compiler warnings.
Fixes: 2a4443a69934 ("[PATCH] IB/mthca: fill in opcode field for send completions")
Link: https://lore.kernel.org/r/20201026211311.3887003-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
All FD object destroy implementations return 0, so declare this callback
void.
Link: https://lore.kernel.org/r/20201104144556.3809085-3-leon@kernel.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Remove the ib_is_destroyable_retryable() concept.
The idea here was to allow the drivers to forcibly clean the HW object
even if they otherwise didn't want to (eg because of usecnt). This was an
attempt to clean up in a world where drivers were not allowed to fail HW
object destruction.
Now that we are going back to allowing HW objects to fail destroy this
doesn't make sense. Instead if a uobject's HW object can't be destroyed it
is left on the uobject list and it is up to uverbs_destroy_ufile_hw() to
clean it. Multiple passes over the uobject list allow hidden dependencies
to be resolved. If that fails the HW driver is broken, throw a WARN_ON and
leak the HW object memory.
All the other tricky failure paths (eg on creation error unwind) have
already been updated to this new model.
Link: https://lore.kernel.org/r/20201104144556.3809085-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The xarray is never mutated from an IRQ handler, only from work queues
under a spinlock_irq. Thus there is no reason for it be an IRQ type
xarray.
This was copied over from the original IDR code, but the recent rework put
the xarray inside another spinlock_irq which will unbalance the unlocking.
Fixes: c206f8bad15d ("RDMA/cm: Make it clearer how concurrency works in cm_req_handler()")
Link: https://lore.kernel.org/r/0-v1-808b6da3bd3f+1857-cm_xarray_no_irq_jgg@nvidia.com
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
It is not the kernel style, warning reported by coccicheck:
./ib_isert.c:1104:12-24: WARNING: Comparison to bool
Link: https://lore.kernel.org/r/1604404674-32998-1-git-send-email-zou_wei@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Since the commit fd49ddaf7e26 ("RDMA/rxe: prevent rxe creation on top of
vlan interface") does not permit rxe on top of vlan device, all the stuff
related with vlan should be removed.
Fixes: fd49ddaf7e26 ("RDMA/rxe: prevent rxe creation on top of vlan interface")
Link: https://lore.kernel.org/r/1604326422-18625-1-git-send-email-yanjunz@nvidia.com
Signed-off-by: Zhu Yanjun <yanjunz@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Pull rdma fixes from Jason Gunthorpe:
"A few more merge window regressions that didn't make rc1:
- New validation in the DMA layer triggers wrong use of the DMA layer
in rxe, siw and rdmavt
- Accidental change of a hypervisor facing ABI when widening the port
speed u8 to u16 in vmw_pvrdma
- Memory leak on error unwind in SRP target"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/srpt: Fix typo in srpt_unregister_mad_agent docstring
RDMA/vmw_pvrdma: Fix the active_speed and phys_state value
IB/srpt: Fix memory leak in srpt_add_one
RDMA: Fix software RDMA drivers for dma mapping error
|
|
htmldocs fails with:
drivers/infiniband/ulp/srpt/ib_srpt.c:630: warning: Function parameter or member 'port_cnt' not described in 'srpt_unregister_mad_agent'
Fixes: 372a1786283e ("IB/srpt: Fix memory leak in srpt_add_one")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Drop the sess_cmd_lock by:
- Removing the sess_cmd_list use from LIO core, because it's been
moved to qla2xxx.
- Removing sess_tearing_down check in the I/O path. Instead of using that
bit and the sess_cmd_lock, we rely on the cmd_count percpu ref. To do
this we switch to percpu_ref_kill_and_confirm/percpu_ref_tryget_live.
Link: https://lore.kernel.org/r/1604257174-4524-7-git-send-email-michael.christie@oracle.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
cmd.bad_sector currently gets packed into the sense INFORMATION field for
TCM_LOGICAL_BLOCK_{GUARD,APP_TAG,REF_TAG}_CHECK_FAILED errors, which carry
an .add_sector_info flag in the sense_detail_table to ensure this.
In preparation for propagating a byte offset on COMPARE AND WRITE
TCM_MISCOMPARE_VERIFY error, rename cmd.bad_sector to cmd.sense_info and
sense_detail.add_sector_info to sense_detail.add_sense_info so that it
better reflects the sense INFORMATION field destination.
[ddiss: update previously overlooked ib_isert]
Link: https://lore.kernel.org/r/20201031233211.5207-3-ddiss@suse.de
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull documentation build warning fixes from Jonathan Corbet:
"This contains a series of warning fixes from Mauro; once applied, the
number of warnings from the once-noisy docs build process is nearly
zero.
Getting to this point has required a lot of work; once there,
hopefully we can keep things that way.
I have packaged this as a separate pull because it does a fair amount
of reaching outside of Documentation/. The changes are all in comments
and in code placement. It's all been in linux-next since last week"
* tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits)
docs: SafeSetID: fix a warning
amdgpu: fix a few kernel-doc markup issues
selftests: kselftest_harness.h: fix kernel-doc markups
drm: amdgpu_dm: fix a typo
gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups
drm: amdgpu: kernel-doc: update some adev parameters
docs: fs: api-summary.rst: get rid of kernel-doc include
IB/srpt: docs: add a description for cq_size member
locking/refcount: move kernel-doc markups to the proper place
docs: lockdep-design: fix some warning issues
MAINTAINERS: fix broken doc refs due to yaml conversion
ice: docs fix a devlink info that broke a table
crypto: sun8x-ce*: update entries to its documentation
net: phy: remove kernel-doc duplication
mm: pagemap.h: fix two kernel-doc markups
blk-mq: docs: add kernel-doc description for a new struct member
docs: userspace-api: add iommu.rst to the index file
docs: hwmon: mp2975.rst: address some html build warnings
docs: net: statistics.rst: remove a duplicated kernel-doc
docs: kasan.rst: add two missing blank lines
...
|
|
The pvrdma_port_attr structure is ABI toward the hypervisor, changing it
breaks the ability to report the speed properly. Revert the change to u16.
Fixes: 376ceb31ff87 ("RDMA: Fix link active_speed size")
Link: https://lore.kernel.org/r/20201102225437.26557-1-aditr@vmware.com
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The IBTA specification has new speed - NDR. That speed supports signaling
rate of 100Gb. mlx5 IB driver translates link modes reported by ConnectX
device to IB speed and width. Added translation of new 100Gb, 200Gb and
400Gb link modes to NDR IB type and width of x1, x2 or x4 respectively.
Link: https://lore.kernel.org/r/20201026133738.1340432-3-leon@kernel.org
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add new IBTA speed NDR, supporting signaling rate of 100Gb.
Link: https://lore.kernel.org/r/20201026133738.1340432-2-leon@kernel.org
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The IBTA specification has new speeds - HDR and NDR, supporting signaling
rate of 50Gb and 100Gb respectively. ethtool support of ipoib driver
translates IB speed to signaling rate. Added translation of HDR and NDR IB
types to rates of 50Gb and 100Gb ethernet speed.
Link: https://lore.kernel.org/r/20201026132904.1338526-1-leon@kernel.org
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
These two drivers open code the call to POST_SEND and do not use the
rdma-core wrapper to do it, thus their usages was missed during the audit.
Both drivers use this as a doorbell to signal the kernel to start DMA.
Fixes: 628c02bf38aa ("RDMA: Remove uverbs cmds from drivers that don't use them")
Link: https://lore.kernel.org/r/0-v1-4608c5610afa+fb-uverbs_cmd_post_send_fix_jgg@nvidia.com
Reported-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The rv cannot be 'EAGAIN' in the previous path, we should use '-EAGAIN' to
check it. For example:
Call trace:
->siw_cm_work_handler
->siw_proc_mpareq
->siw_recv_mpa_rr
Link: https://lore.kernel.org/r/20201028122509.47074-1-zhangqilong3@huawei.com
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Failure in srpt_refresh_port() for the second port will leave MAD
registered for the first one, however, the srpt_add_one() will be marked
as "failed" and SRPT will leak resources for that registered but not used
and released first port.
Unregister the MAD agent for all ports in case of failure.
Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Link: https://lore.kernel.org/r/20201028065051.112430-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The commit f959dcd6ddfd ("dma-direct: Fix potential NULL pointer
dereference") made dma_mask as mandetory field to be setup even for
dma_virt_ops based dma devices. The commit in the fixes tag omitted
setting up the dma_mask on virtual devices triggering the below trace when
they were combined during the merge window.
Fix it by setting empty DMA MASK for software based RDMA devices.
WARNING: CPU: 1 PID: 8488 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x493/0x700
CPU: 1 PID: 8488 Comm: syz-executor144 Not tainted 5.9.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:dma_map_page_attrs+0x493/0x700 kernel/dma/mapping.c:149
Trace:
dma_map_single_attrs include/linux/dma-mapping.h:279 [inline]
ib_dma_map_single include/rdma/ib_verbs.h:3967 [inline]
ib_mad_post_receive_mads+0x23f/0xd60 drivers/infiniband/core/mad.c:2715
ib_mad_port_start drivers/infiniband/core/mad.c:2862 [inline]
ib_mad_port_open drivers/infiniband/core/mad.c:3016 [inline]
ib_mad_init_device+0x72b/0x1400 drivers/infiniband/core/mad.c:3092
add_client_context+0x405/0x5e0 drivers/infiniband/core/device.c:680
enable_device_and_get+0x1d5/0x3c0 drivers/infiniband/core/device.c:1301
ib_register_device drivers/infiniband/core/device.c:1376 [inline]
ib_register_device+0x7a7/0xa40 drivers/infiniband/core/device.c:1335
rxe_register_device+0x46d/0x570 drivers/infiniband/sw/rxe/rxe_verbs.c:1182
rxe_add+0x12fe/0x16d0 drivers/infiniband/sw/rxe/rxe.c:247
rxe_net_add+0x8c/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:507
rxe_newlink drivers/infiniband/sw/rxe/rxe.c:269 [inline]
rxe_newlink+0xb7/0xe0 drivers/infiniband/sw/rxe/rxe.c:250
nldev_newlink+0x30e/0x540 drivers/infiniband/core/nldev.c:1555
rdma_nl_rcv_msg+0x367/0x690 drivers/infiniband/core/netlink.c:195
rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
rdma_nl_rcv+0x2f2/0x440 drivers/infiniband/core/netlink.c:259
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:671
____sys_sendmsg+0x6e8/0x810 net/socket.c:2353
___sys_sendmsg+0xf3/0x170 net/socket.c:2407
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2440
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x443699
Link: https://lore.kernel.org/r/20201030093803.278830-1-parav@nvidia.com
Reported-by: syzbot+34dc2fea3478e659af01@syzkaller.appspotmail.com
Fixes: e0477b34d9d1 ("RDMA: Explicitly pass in the dma_device to ib_register_device")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Tested-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Tested-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Zhu Yanjun <yanjunz@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Now that all the PAS arrays or UMR XLT's for mkcs are filled using
rdma_for_each_block() we can use the common ib_umem_find_best_pgsz()
algorithm.
Link: https://lore.kernel.org/r/20201026132314.1336717-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Mixing these together is just a mess, make a dedicated version,
mlx5_ib_update_mr_pas(), which directly loads the whole MTT for a non-ODP
MR.
The split out version can trivially use a simple loop with
rdma_for_each_block() which allows using the core code to compute the MR
pages and avoids seeking in the SGL list after each chunk as the
__mlx5_ib_populate_pas() call required.
Significantly speeds loading large MTTs.
Link: https://lore.kernel.org/r/20201026132314.1336717-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The memory allocation is quite complicated, and makes this function hard
to understand. Refactor things so that a function call sets up the WR, SG,
DMA mapping and buffer, further splitting that into buffer and DMA/wr.
This also slightly changes the buffer allocation logic to try an order 0
page allocation (with OOM warnings on) before going to the emergency page.
Link: https://lore.kernel.org/r/20201026132314.1336717-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This is the only user, so remove the wrappers.
Link: https://lore.kernel.org/r/20201026132314.1336717-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This routine converts the umem SGL into a list of fixed pages for DMA,
which is exactly what rdma_umem_for_each_dma_block() is for, use the
common code directly.
Link: https://lore.kernel.org/r/20201026132314.1336717-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Most callers don't need this, and the few that do can get it as
ib_umem_num_pages(umem).
Link: https://lore.kernel.org/r/20201026131936.1335664-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This is the same as ib_umem_num_dma_blocks(umem, 1UL << page_shift), have
the callers compute it directly.
Link: https://lore.kernel.org/r/20201026131936.1335664-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Only alloc_mr_from_cache() needs order and can trivially compute it, so
lift it to the one call site and remove the NULL arguments.
Link: https://lore.kernel.org/r/20201026131936.1335664-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
For the user MR path, instead of calling this after getting the umem, call
it as part of creating the struct mlx5_ib_mr and distill its output to a
single page_shift stored inside the mr.
This avoids passing around the tuple of its output. Based on the umem and
page_shift, the output arguments can be computed using:
count == ib_umem_num_pages(mr->umem)
shift == mr->page_shift
ncont == ib_umem_num_dma_blocks(mr->umem, 1 << mr->page_shift)
order == order_base_2(ncont)
And since mr->page_shift == umem_odp->page_shift then ncont ==
ib_umem_num_dma_blocks() == ib_umem_odp_num_pages() for ODP umems.
Link: https://lore.kernel.org/r/20201026131936.1335664-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This is the same value as ib_umem_num_pages(mr->umem), use that instead.
Link: https://lore.kernel.org/r/20201026131936.1335664-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
reg_pages should always contain mr->npage since when the mr is finally
de-reg'd it is always subtracted out.
If there were any error exits then mlx5_ib_rereg_user_mr() would leave the
reg_pages adjusted and this will cause it to be double subtracted
eventually.
The manipulation of reg_pages is inherently connected to the umem, so lift
it out of set_mr_fields() and only adjust it around creating/destroying a
umem.
reg_pages is only used for diagnostics in sysfs.
Fixes: 7d0cc6edcc70 ("IB/mlx5: Add MR cache for large UMR regions")
Link: https://lore.kernel.org/r/20201026131936.1335664-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The is only ever set to non-zero if the MR is from the cache, and if it is
cached then the order is in cached_ent->order.
Make it clearer that use_umr_mtt_update() only returns true for cached MRs
and remove the redundant data.
Link: https://lore.kernel.org/r/20201026131936.1335664-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Manual changes for sysfs_emit as cocci scripts can't easily convert them.
Link: https://lore.kernel.org/r/ecde7791467cddb570c6f6d2c908ffbab9145cac.1602122880.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Make changes to use sysfs_emit in the RDMA code as cocci scripts can not
be written to handle _all_ the possible variants of various sprintf family
uses in sysfs show functions.
While there, make the code more legible and update its style to be more
like the typical kernel styles.
Miscellanea:
o Use intermediate pointers for dereferences
o Add and use string lookup functions
o return early when any intermediate call fails so normal return is
at the bottom of the function
o mlx4/mcg.c:sysfs_show_group: use scnprintf to format intermediate strings
Link: https://lore.kernel.org/r/f5c9e4c9d8dafca1b7b70bd597ee7f8f219c31c8.1602122880.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Changeset c804af2c1d31 ("IB/srpt: use new shared CQ mechanism")
added a new member for struct srpt_rdma_ch, but didn't add the
corresponding kernel-doc markup, as repoted when doing
"make htmldocs":
./drivers/infiniband/ulp/srpt/ib_srpt.h:331: warning: Function parameter or member 'cq_size' not described in 'srpt_rdma_ch'
Add a description for it.
Fixes: c804af2c1d31 ("IB/srpt: use new shared CQ mechanism")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Link: https://lore.kernel.org/r/df0e5f0e866b91724299ef569a2da8115e48c0cf.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add a interface to fill GMV(SGID/SMAC/VLAN) table for HIP09, all of above
source address information is stored as an entry in GMV table. The users
just need to provide the index to the hardware when POST SEND.
Link: https://lore.kernel.org/r/1603508836-33054-3-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
HIP09 supports to store SGID/SMAC/VLAN together in a table named GMV. The
driver needs to allocate memory for it and tell the information about this
region to hardware.
Link: https://lore.kernel.org/r/1603508836-33054-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Remove the argument since it is not used in the function.
Link: https://lore.kernel.org/r/20201023074353.21946-13-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Since the three functions share the similar logic, let's introduce one
common function for it.
Link: https://lore.kernel.org/r/20201023074353.21946-12-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This function isn't needed since no caller checks the old_state of sess.
Link: https://lore.kernel.org/r/20201023074353.21946-11-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
process_info_rsp checks that sg_cnt is zero twice.
Link: https://lore.kernel.org/r/20201023074353.21946-10-jinpu.wang@cloud.ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The events returning the same error value are put together.
Link: https://lore.kernel.org/r/20201023074353.21946-9-jinpu.wang@cloud.ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The direction of DMA operation is already in the rtrs_iu
Link: https://lore.kernel.org/r/20201023074353.21946-8-jinpu.wang@cloud.ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
It should mean region here.
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201023074353.21946-7-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The purpose of srv_mutex is to protect srv_list as in put_srv, so no need
to hold it when allocate memory for srv since it could be time consuming.
Otherwise if one machine has limited memory, rsrv_close_work could be
blocked for a longer time due to the mutex is held by get_or_create_srv
since it can't get memory in time.
INFO: task kworker/1:1:27478 blocked for more than 120 seconds.
Tainted: G O 4.14.171-1-storage #4.14.171-1.3~deb9
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/1:1 D 0 27478 2 0x80000000
Workqueue: rtrs_server_wq rtrs_srv_close_work [rtrs_server]
Call Trace:
? __schedule+0x38c/0x7e0
schedule+0x32/0x80
schedule_preempt_disabled+0xa/0x10
__mutex_lock.isra.2+0x25e/0x4d0
? put_srv+0x44/0x100 [rtrs_server]
put_srv+0x44/0x100 [rtrs_server]
rtrs_srv_close_work+0x16c/0x280 [rtrs_server]
process_one_work+0x1c5/0x3c0
worker_thread+0x47/0x3e0
kthread+0xfc/0x130
? trace_event_raw_event_workqueue_execute_start+0xa0/0xa0
? kthread_create_on_node+0x70/0x70
ret_from_fork+0x1f/0x30
Let's move all the logics from __find_srv_and_get and __alloc_srv to
get_or_create_srv, and remove the two functions. Then it should be safe
for multiple processes to access the same srv since it is protected with
srv_mutex.
And since we don't want to allocate chunks with srv_mutex held, let's
check the srv->refcount after get srv because the chunks could not be
allocated yet.
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201023074353.21946-6-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
