summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-28mhi_uci: Add DUN & MBIM bindings5.11.0-quectel-v05.11.0-quectel-1215.11.0-quectel-1Loic Poulain
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2021-01-28mhi: pci_generic: Add quectel EM1XXGR-L supportLoic Poulain
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2021-01-28net: mhi: Add mbim protoLoic Poulain
MBIM has initially been specified by USB-IF for transporting data (IP) between a modem and a host over USB. However some modern modems also support MBIM over PCIe (via MHI). In the same way as QMAP(rmnet), it allows to aggregate IP packets and to perform context multiplexing. This change adds minimal MBIM support to MHI, allowing to support MBIM only modems. MBIM being based on USB NCM, it reuses some helpers from the USB stack, but the cdc-mbim driver is too USB coupled to be reused. At some point it would be interesting to move on a factorized solution, having a generic MBIM network lib or dedicated MBIM netlink virtual interface support. Co-Developed-by: Carl Yin <carl.yin@quectel.com> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2021-01-27net: mhi: Add dedicated folderLoic Poulain
Create a dedicated mhi directory for mhi-net, mhi-net is going to be split into differente files (for additional protocol support). Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2021-01-27net: mhi: Add RX/TX fixup callbacksLoic Poulain
MHI can transport different protocols, some are handled at upper level, like IP and QMAP(rmnet/netlink), but others will need to be inside MHI net driver, like mbim. This change adds support for protocol rx/tx fixup callbacks registration, that can be used to encode/decode the targeted protocol. Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2021-01-21net: mhi: Set wwan device typeLoic Poulain
The 'wwan' devtype is meant for devices that require additional configuration to be used, like WWAN specific APN setup over AT/QMI commands, rmnet link creation, etc. This is the case for MHI (Modem host Interface) netdev which targets modem/WWAN endpoints. Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2021-01-18bus: mhi: core: Move MHI_MAX_MTU to external header fileHemant Kumar
Currently this macro is defined in internal MHI header as a TRE length mask. Moving it to external header allows MHI client drivers to set this upper bound for the transmit buffer size. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-18bus: mhi: core: Add helper API to return number of free TREsHemant Kumar
Introduce mhi_get_free_desc_count() API to return number of TREs available to queue buffer. MHI clients can use this API to know before hand if ring is full without calling queue API. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-18bus: mhi: Add userspace client interface driverHemant Kumar
This MHI client driver allows userspace clients to transfer raw data between MHI device and host using standard file operations. Driver instantiates UCI device object which is associated to device file node. UCI device object instantiates UCI channel object when device file node is opened. UCI channel object is used to manage MHI channels by calling MHI core APIs for read and write operations. MHI channels are started as part of device open(). MHI channels remain in start state until last release() is called on UCI device file node. Device file node is created with format /dev/mhi_<mhi_device_name> Currently it supports QMI channel. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-18kernel: configs: Add MHI config fragmentLoic Poulain
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2021-01-06mhi: pci_generic: Fix shared MSI vector supportLoic Poulain
When a shared MSI vector must be used (e.g. when VTd is disabled on x86_64), each event MSI vector must be set to the shared vector idx. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Hemant Kumar<hemantk@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-06mhi: unconstify mhi_event_configLoic Poulain
Some parameters may have to be determined at runtime. It is the case for the event ring MSI vector. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-06bus: mhi: Ensure correct ring update ordering with memory barrierLoic Poulain
The ring element data, though being part of coherent memory, still need to be performed before updating the ring context to point to this new element. That can be guaranteed with a memory barrier (dma_wmb). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-04mhi: use irq_flags if controller driver configures itCarl Huang
If controller driver has specified the irq_flags, mhi uses this specified irq_flags. Otherwise, mhi uses default irq_flags. The purpose of this change is to support one MSI vector for QCA6390. MHI will use one same MSI vector too in this scenario. In case of one MSI vector, IRQ_NO_BALANCING is needed when irq handler is requested. The reason is if irq migration happens, the msi_data may change too. However, the msi_data is already programmed to QCA6390 hardware during initialization phase. This msi_data inconsistence will result in crash in kernel. Another issue is in case of one MSI vector, IRQF_NO_SUSPEND will trigger WARNINGS because QCA6390 wants to disable the IRQ during the suspend. To avoid above two issues, QCA6390 driver specifies the irq_flags in case of one MSI vector when mhi_register_controller is called. Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-04mhi: pci_generic: Set irq moderation value to 1ms for hw channelsLoic Poulain
MHI hardware channels are usually the hardware accelerated data path e.g. IP packets path for modems. This path needs to be optimized for low latency and high throughput. After several tests on FN980m SDX55 based modem, it seems 1ms is a good default irq_moderation value: - It allows to reach the maximum download throughput - It introduces limited latency (5ms is too high) - It prevents interrupt flooding Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-04mhi: pci_generic: Add diag channelsLoic Poulain
Add support for Diag over MHI. Qualcomm Diag is the qualcomm diagnostics interface that can be used to collect modem logs, events, traces, etc. It can be used by tools such QPST or QXDM. This patch adds the DIAG channels and a dedicated event ring. Reviewed-by Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-04mhi: pci_generic: Increase controller timeout valueLoic Poulain
On cold boot, device can take slightly more than 5 seconds to start. Increase the timeout to prevent MHI power-up issues. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-04mhi: pci_generic: Add health-checkLoic Poulain
If the modem crashes for any reason, we may not be able to detect it at MHI level (MHI registers not reachable anymore). This patch implements a health-check mechanism to check regularly that device is alive (MHI layer can communicate with). If device is not alive (because a crash or unexpected reset), the recovery procedure is triggered. Tested successfully with Telit FN980m module. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-04mhi: pci_generic: Add PCI error handlersLoic Poulain
In AER capable root complex, errors are reported to the host which can then act accordingly and perform PCI recovering procedure. This patch enables error reporting and implements error_detected, slot_reset and resume callbacks. Reviewed-by Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-04mhi: pci_generic: Add suspend/resume/recovery procedureLoic Poulain
Add support for system wide suspend/resume. During suspend, MHI device controller must be put in M3 state and PCI bus in D3 state. Add a recovery procedure allowing to reinitialize the device in case of error during resume steps, which can happen if device loses power (and so its context) while system suspend. Reviewed-by Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-04mhi: pci_generic: Add support for resetLoic Poulain
Add support for resetting the device, reset can be triggered in case of error or manually via sysfs (/sys/bus/pci/devices/*/reset). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-04mhi: pci_generic: Enable burst mode for hardware channelsLoic Poulain
Hardware channels have a feature called burst mode that allows to queue transfer ring element(s) (TRE) to a channel without ringing the device doorbell. In that mode, the device is polling the channel context for new elements. This reduces the frequency of host initiated doorbells and increase throughput. Create a new dedicated macro for hardware channels with burst enabled. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-04mhi: pci-generic: Increase number of hardware eventsLoic Poulain
If the IPA (IP hardware accelerator) is starved of event ring elements, the modem is crashing (SDX55). That can be prevented by setting a larger number of events (i.e 2 x number of channel ring elements). Tested with FN980m module. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-04bus: mhi: core: Add device hardware reset supportLoic Poulain
The MHI specification allows to perform a hard reset of the device when writing to the SOC_RESET register. It can be used to completely restart the device (e.g. in case of unrecoverable MHI error). This is up to the MHI controller driver to determine when this hard reset should be used, and in case of MHI errors, should be used as a reset of last resort (after standard MHI stack reset). This function is a stateless function, the MHI layer do nothing except triggering the reset by writing into the right register(s), this is up to the caller to ensure right mhi_controller state (e.g. unregister the controller if necessary). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2020-12-27Linux 5.11-rc1Linus Torvalds
2020-12-27proc mountinfo: make splice available againLinus Torvalds
Since commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") we've required that file operation structures explicitly enable splice support, rather than falling back to the default handlers. Most /proc files use the indirect 'struct proc_ops' to describe their file operations, and were fixed up to support splice earlier in commits 40be821d627c..b24c30c67863, but the mountinfo files interact with the VFS directly using their own 'struct file_operations' and got missed as a result. This adds the necessary support for splice to work for /proc/*/mountinfo and friends. Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com> Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-27Merge tag 'ntb-5.11' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB fixes from Jon Mason: "Bug fix for IDT NTB and Intel NTB LTR management support" * tag 'ntb-5.11' of git://github.com/jonmason/ntb: ntb: intel: add Intel NTB LTR vendor support for gen4 NTB ntb: idt: fix error check in ntb_hw_idt.c
2020-12-27Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "Fix a number of autobuild failures due to missing Kconfig dependencies" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: qat - add CRYPTO_AES to Kconfig dependencies crypto: keembay - Add dependency on HAS_IOMEM crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAY
2020-12-27Merge tag 'objtool-urgent-2020-12-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Ingo Molnar: "Fix a segfault that occurs when built with Clang" * tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix seg fault with Clang non-section symbols
2020-12-27Merge tag 'locking-urgent-2020-12-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Misc fixes/updates: - Fix static keys usage in module __init sections - Add separate MAINTAINERS entry for static branches/calls - Fix lockdep splat with CONFIG_PREEMPTIRQ_EVENTS=y tracing" * tag 'locking-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: softirq: Avoid bad tracing / lockdep interaction jump_label/static_call: Add MAINTAINERS jump_label: Fix usage in module __init
2020-12-27Merge tag 'timers-urgent-2020-12-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Update/fix two CPU sanity checks in the hotplug and the boot code, and fix a typo in the Kconfig help text. [ Context: the first two commits are the result of an ongoing annotation+review work of (intentional) tick_do_timer_cpu() data races reported by KCSAN, but the annotations aren't fully cooked yet ]" * tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Fix spelling mistake in Kconfig "fullfill" -> "fulfill" tick/sched: Remove bogus boot "safety" check tick: Remove pointless cpu valid check in hotplug code
2020-12-27Merge tag 'sched-urgent-2020-12-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "Fix a context switch performance regression" * tag 'sched-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Optimize finish_lock_switch()
2020-12-26mfd: ab8500-debugfs: Remove extraneous seq_putcLinus Torvalds
Commit c9a3c4e637ac ("mfd: ab8500-debugfs: Remove extraneous curly brace") removed a left-over curly brace that caused build failures, but Joe Perches points out that the subsequent 'seq_putc()' should also be removed, because the commit that caused all these problems already added the final '\n' to the seq_printf() above it. Reported-by: Joe Perches <joe@perches.com> Fixes: 886c8121659d ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-25Merge tag 'pci-v5.11-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Fix a tegra enumeration regression (Rob Herring) - Fix a designware-host check that warned on *success*, not failure (Alexander Lobakin) * tag 'pci-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: dwc: Fix inverted condition of DMA mask setup warning PCI: tegra: Fix host link initialization
2020-12-25mfd: ab8500-debugfs: Remove extraneous curly braceNathan Chancellor
Clang errors: drivers/mfd/ab8500-debugfs.c:1526:2: error: non-void function does not return a value [-Werror,-Wreturn-type] } ^ drivers/mfd/ab8500-debugfs.c:1528:2: error: expected identifier or '(' return 0; ^ drivers/mfd/ab8500-debugfs.c:1529:1: error: extraneous closing brace ('}') } ^ 3 errors generated. The cleanup in ab8500_interrupts_show left a curly brace around, remove it to fix the error. Fixes: 886c8121659d ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-25PCI: dwc: Fix inverted condition of DMA mask setup warningAlexander Lobakin
Commit 660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") added dma_mask_set() call to explicitly set 32-bit DMA mask for MSI message mapping, but for now it throws a warning on ret == 0, while dma_set_mask() returns 0 in case of success. Fix this by inverting the condition. [bhelgaas: join string to make it greppable] Fixes: 660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") Link: https://lore.kernel.org/r/20201222150708.67983-1-alobakin@pm.me Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-25PCI: tegra: Fix host link initializationRob Herring
Commit b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code") broke enumeration of downstream devices on Tegra: In non-working case (next-20201211): 0001:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad2 (rev a1) 0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13) 0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1) In working case (v5.10-rc7): 0001:00:00.0 PCI bridge: Molex Incorporated Device 1ad2 (rev a1) 0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13) 0005:00:00.0 PCI bridge: Molex Incorporated Device 1ad0 (rev a1) 0005:01:00.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab) 0005:02:02.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab) 0005:03:00.0 USB controller: PLX Technology, Inc. Device 3380 (rev ab) The problem seems to be dw_pcie_setup_rc() is now called twice before and after the link up handling. The fix is to move Tegra's link up handling to .start_link() function like other DWC drivers. Tegra is a bit more complicated than others as it re-inits the whole DWC controller to retry the link. With this, the initialization ordering is restored to match the prior sequence. Fixes: b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code") Link: https://lore.kernel.org/r/20201218143905.1614098-1-robh@kernel.org Reported-by: Mian Yousaf Kaukab <ykaukab@suse.de> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Vidya Sagar <vidyas@nvidia.com>
2020-12-25drm/amd/display: avoid uninitialized variable warningLinus Torvalds
clang (quite rightly) complains fairly loudly about the newly added mpc1_get_mpc_out_mux() function returning an uninitialized value if the 'opp_id' checks don't pass. This may not happen in practice, but the code really shouldn't return garbage if the sanity checks don't pass. So just initialize 'val' to zero to avoid the issue. Fixes: 110b055b2827 ("drm/amd/display: add getter routine to retrieve mpcc mux") Cc: Josip Pavic <Josip.Pavic@amd.com> Cc: Bindu Ramamurthy <bindu.r@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-25Merge tag 'perf-tools-2020-12-24' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Refactor 'perf stat' per CPU/socket/die/thread aggregation fixing use cases in ARM machines. - Fix memory leak when synthesizing SDT probes in 'perf probe'. - Update kernel header copies related to KVM, epol_pwait. msr-index and powerpc and s390 syscall tables. * tag 'perf-tools-2020-12-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (24 commits) perf probe: Fix memory leak when synthesizing SDT probes perf stat aggregation: Add separate thread member perf stat aggregation: Add separate core member perf stat aggregation: Add separate die member perf stat aggregation: Add separate socket member perf stat aggregation: Add separate node member perf stat aggregation: Start using cpu_aggr_id in map perf cpumap: Drop in cpu_aggr_map struct perf cpumap: Add new map type for aggregation perf stat: Replace aggregation ID with a struct perf cpumap: Add new struct for cpu aggregation perf cpumap: Use existing allocator to avoid using malloc perf tests: Improve topology test to check all aggregation types perf tools: Update s390's syscall.tbl copy from the kernel sources perf tools: Update powerpc's syscall.tbl copy from the kernel sources perf s390: Move syscall.tbl check into check-headers.sh perf powerpc: Move syscall.tbl check to check-headers.sh tools headers UAPI: Synch KVM's svm.h header with the kernel tools kvm headers: Update KVM headers from the kernel sources tools headers UAPI: Sync KVM's vmx.h header with the kernel sources ...
2020-12-25Merge branch 'for-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux Pull coccinelle updates from Julia Lawall. * 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: scripts: coccicheck: Correct usage of make coccicheck coccinelle: update expiring email addresses coccinnelle: Remove ptr_ret script kbuild: do not use scripts/ld-version.sh for checking spatch version remove boolinit.cocci
2020-12-25genirq: Fix export of irq_to_desc() for powerpc KVMMichael Ellerman
Commit 64a1b95bb9fe ("genirq: Restrict export of irq_to_desc()") removed the export of irq_to_desc() unless powerpc KVM is being built, because there is still a use of irq_to_desc() in modular code there. However it used: #ifdef CONFIG_KVM_BOOK3S_64_HV Which doesn't work when that symbol is =m, leading to a build failure: ERROR: modpost: "irq_to_desc" [arch/powerpc/kvm/kvm-hv.ko] undefined! Fix it by checking for the definedness of the correct symbol which is CONFIG_KVM_BOOK3S_64_HV_MODULE. Fixes: 64a1b95bb9fe ("genirq: Restrict export of irq_to_desc()") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-25Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted patches from previous cycle(s)..." * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix hostfs_open() use of ->f_path.dentry Make sure that make_create_in_sticky() never sees uninitialized value of dir_mode fs: Kill DCACHE_DONTCACHE dentry even if DCACHE_REFERENCED is set fs: Handle I_DONTCACHE in iput_final() instead of generic_drop_inode() fs/namespace.c: WARN if mnt_count has become negative
2020-12-24Merge tag 'docs-5.11-2' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "A small set of late-arriving, small documentation fixes" * tag 'docs-5.11-2' of git://git.lwn.net/linux: docs: admin-guide: Fix default value of max_map_count in sysctl/vm.rst Documentation/submitting-patches: Document the SoB chain Documentation: process: Correct numbering docs: submitting-patches: Trivial - fix grammatical error
2020-12-24Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Various bug fixes and cleanups for ext4; no new features this cycle" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (29 commits) ext4: remove unnecessary wbc parameter from ext4_bio_write_page ext4: avoid s_mb_prefetch to be zero in individual scenarios ext4: defer saving error info from atomic context ext4: simplify ext4 error translation ext4: move functions in super.c ext4: make ext4_abort() use __ext4_error() ext4: standardize error message in ext4_protect_reserved_inode() ext4: remove redundant sb checksum recomputation ext4: don't remount read-only with errors=continue on reboot ext4: fix deadlock with fs freezing and EA inodes jbd2: add a helper to find out number of fast commit blocks ext4: make fast_commit.h byte identical with e2fsprogs/fast_commit.h ext4: fix fall-through warnings for Clang ext4: add docs about fast commit idempotence ext4: remove the unused EXT4_CURRENT_REV macro ext4: fix an IS_ERR() vs NULL check ext4: check for invalid block size early when mounting a file system ext4: fix a memory leak of ext4_free_data ext4: delete nonsensical (commented-out) code inside ext4_xattr_block_set() ext4: update ext4_data_block_valid related comments ...
2020-12-24Merge tag 'Smack-for-5.11-io_uring-fix' of ↵Linus Torvalds
git://github.com/cschaufler/smack-next Pull smack fix from Casey Schaufler: "Provide a fix for the incorrect handling of privilege in the face of io_uring's use of kernel threads. That invalidated an long standing assumption regarding the privilege of kernel threads. The fix is simple and safe. It was provided by Jens Axboe and has been tested" * tag 'Smack-for-5.11-io_uring-fix' of git://github.com/cschaufler/smack-next: Smack: Handle io_uring kernel thread privileges
2020-12-24Merge tag 'riscv-for-linus-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fix from Palmer Dabbelt "Avoid trying to initialize memory regions outside the usable range" * tag 'riscv-for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Fix usage of memblock_enforce_memory_limit
2020-12-24Merge tag 'powerpc-5.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Four commits fixing various things in the new C VDSO code - One fix for a 32-bit VMAP stack bug - Two minor build fixes Thanks to Cédric Le Goater, Christophe Leroy, and Will Springer. * tag 'powerpc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32: Fix vmap stack - Properly set r1 before activating MMU on syscall too powerpc/vdso: Fix DOTSYM for 32-bit LE VDSO powerpc/vdso: Don't pass 64-bit ABI cflags to 32-bit VDSO powerpc/vdso: Block R_PPC_REL24 relocations powerpc/smp: Add __init to init_big_cores() powerpc/time: Force inlining of get_tb() powerpc/boot: Fix build of dts/fsl
2020-12-24Merge tag 'irq-core-2020-12-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This is the second attempt after the first one failed miserably and got zapped to unblock the rest of the interrupt related patches. A treewide cleanup of interrupt descriptor (ab)use with all sorts of racy accesses, inefficient and disfunctional code. The goal is to remove the export of irq_to_desc() to prevent these things from creeping up again" * tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) genirq: Restrict export of irq_to_desc() xen/events: Implement irq distribution xen/events: Reduce irq_info:: Spurious_cnt storage size xen/events: Only force affinity mask for percpu interrupts xen/events: Use immediate affinity setting xen/events: Remove disfunct affinity spreading xen/events: Remove unused bind_evtchn_to_irq_lateeoi() net/mlx5: Use effective interrupt affinity net/mlx5: Replace irq_to_desc() abuse net/mlx4: Use effective interrupt affinity net/mlx4: Replace irq_to_desc() abuse PCI: mobiveil: Use irq_data_get_irq_chip_data() PCI: xilinx-nwl: Use irq_data_get_irq_chip_data() NTB/msi: Use irq_has_action() mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc pinctrl: nomadik: Use irq_has_action() drm/i915/pmu: Replace open coded kstat_irqs() copy drm/i915/lpe_audio: Remove pointless irq_to_desc() usage s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt() parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts() ...
2020-12-24Merge tag 'efi_updates_for_v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Borislav Petkov: "These got delayed due to a last minute ia64 build issue which got fixed in the meantime. EFI updates collected by Ard Biesheuvel: - Don't move BSS section around pointlessly in the x86 decompressor - Refactor helper for discovering the EFI secure boot mode - Wire up EFI secure boot to IMA for arm64 - Some fixes for the capsule loader - Expose the RT_PROP table via the EFI test module - Relax DT and kernel placement restrictions on ARM with a few followup fixes: - fix the build breakage on IA64 caused by recent capsule loader changes - suppress a type mismatch build warning in the expansion of EFI_PHYS_ALIGN on ARM" * tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: arm: force use of unsigned type for EFI_PHYS_ALIGN efi: ia64: disable the capsule loader efi: stub: get rid of efi_get_max_fdt_addr() efi/efi_test: read RuntimeServicesSupported efi: arm: reduce minimum alignment of uncompressed kernel efi: capsule: clean scatter-gather entries from the D-cache efi: capsule: use atomic kmap for transient sglist mappings efi: x86/xen: switch to efi_get_secureboot_mode helper arm64/ima: add ima_arch support ima: generalize x86/EFI arch glue for other EFI architectures efi: generalize efi_get_secureboot efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes efi/x86: Only copy the compressed kernel image in efi_relocate_kernel() efi/libstub/x86: simplify efi_is_native()
2020-12-24Merge tag 'io_uring-5.11-2020-12-23' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "All straight fixes, or a prep patch for a fix, either bound for stable or fixing issues from this merge window. In particular: - Fix new shutdown op not breaking links on failure - Hold mm->mmap_sem for mm->locked_vm manipulation - Various cancelation fixes (me, Pavel) - Fix error path potential double ctx free (Pavel) - IOPOLL fixes (Xiaoguang)" * tag 'io_uring-5.11-2020-12-23' of git://git.kernel.dk/linux-block: io_uring: hold uring_lock while completing failed polled io in io_wq_submit_work() io_uring: fix double io_uring free io_uring: fix ignoring xa_store errors io_uring: end waiting before task cancel attempts io_uring: always progress task_work on task cancel io-wq: kill now unused io_wq_cancel_all() io_uring: make ctx cancel on exit targeted to actual ctx io_uring: fix 0-iov read buffer select io_uring: close a small race gap for files cancel io_uring: fix io_wqe->work_list corruption io_uring: limit {io|sq}poll submit locking scope io_uring: inline io_cqring_mark_overflow() io_uring: consolidate CQ nr events calculation io_uring: remove racy overflow list fast checks io_uring: cancel reqs shouldn't kill overflow list io_uring: hold mmap_sem for mm->locked_vm manipulation io_uring: break links on shutdown failure
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-28 19:35:18 +0000