.TH INITRAMFS-TOOLS 8 "Date: 2005/12/06" "" "mkinitramfs script overview" .SH NAME initramfs-tools \- an introduction to writing scripts for mkinitramfs .SH DESCRIPTION initramfs-tools has one main script and two different sets of subscripts which will be used during different phases of execution. Each of these will be discussed separately below with the help of an imaginary tool which performs a frobnication of a lvm partition prior to mounting the root partition. .SS Hook scripts These are used when an initramfs image is created and not included in the image itself. They can however cause files to be included in the image. .SS Boot scripts These are included in the initramfs image and normally executed during kernel boot in the early user-space before the root partition has been mounted. initramfs-tools uses shell variable names for handling dependencies. Notice that `-' is not a valid shell variable name and thus should not be used as script filename. .SH INIT SCRIPT The script which is executed first and is in charge of running all other scripts can be found in /usr/share/initramfs-tools/init. It takes a number of arguments which influence the boot procedure: .SS Boot options .TP \fB \fI init the binary to hand over execution to on the root fs after the initramfs scripts are done. .TP \fB \fI root the device node to mount as the rootfs. .TP \fB \fI nfsroot can be either "auto" to try to get the relevant information from DHCP or a string of the form NFSSERVER:NFSPATH .TP \fB \fI boot either local or NFS (affects which initramfs scripts are run, see the "Subdirectories" section under boot scripts). .TP \fB \fI resume On install initramfs-tools tries to autodetect the resume partition. On success the RESUME variable is written to /etc/initramfs-tools/conf.d/resume. The boot variable overrides it. .TP \fB \fI quiet reduces the amount of text output to the console during boot .TP \fB \fI ro mounts the rootfs read-only .TP \fB \fI rw mounts the rootfs read-write .TP \fB \fI debug generates lots of output to /tmp/initramfs.debug .TP \fB \fI break spawns a shell in the initramfs image at chosen run-time .SH HOOK SCRIPTS Hooks can be found in two places: /usr/share/initramfs-tools/hooks and /etc/initramfs-tools/hooks. They are executed during generation of the initramfs-image and are responsible for including all the necessary components in the image itself. No guarantees are made as to the order in which the different scripts are executed unless the prereqs are setup in the script. .SS Header In order to support prereqs, each script should begin with the following lines: .RS .nf #!/bin/sh PREREQ="" prereqs() { echo "$PREREQ" } case $1 in prereqs) prereqs exit 0 ;; esac . /usr/share/initramfs-tools/hook-functions # Begin real processing below this line .fi .RE For example, if you are writing a new hook script which relies on lvm, the line starting with PREREQ should be changed to PREREQ="lvm" which will ensure that the lvm hook script is run before your custom script. .SS Help functions /usr/share/initramfs-tools/hook-functions contains a number of functions which deal with some common tasks in a hook script: .TP \fB \fI manual_add_modules adds a module (and any modules which it depends on) to the initramfs image. .RS .PP .B Example: manual_add_modules isofs .RE .TP \fB \fI add_modules_from_file reads a file containing a list of modules (one per line) to be added to the initramfs image. The file can contain comments (lines starting with #) and arguments to the modules by writing the arguments on the same line as the name of the module. .RS .PP .B Example: add_modules_from_file /tmp/modlist .RE .TP \fB \fI force_load adds a module (and its dependencies) to the initramfs image and also unconditionally loads the module during boot. Also supports passing arguments to the module by listing them after the module name. .RS .PP .B Example: force_load cdrom debug=1 .RE .TP \fB \fI copy_modules_dir copies an entire module directory from /lib/modules/KERNELVERSION/ into the initramfs image. .RS .PP .B Example: copy_modules_dir kernel/drivers/pci/foobar .RE .SS Including binaries If you need to copy binaries to the initramfs module, a command like this should be used: .PP .RS copy_exec /sbin/mdadm "${DESTDIR}/sbin" .RE mkinitramfs will automatically detect which libraries the executable depends on and copy them to the initramfs. This means that most executables, unless compiled with klibc, will automatically include glibc in the image which will increase its size by several hundred kilobytes. .SH BOOT SCRIPTS Similarly to hook scripts, boot scripts can be found in two places /usr/share/initramfs-tools/scripts/ and /etc/initramfs-tools/scripts/. There are a number of subdirectories to these two directories which control the boot stage at which the scripts are executed. .SS Header Like for hook scripts, there are no guarantees as to the order in which the different scripts in one subdirectory (see "Subdirectories" below) are executed. In order to define a certain order, a similar header as for hook scripts should be used: .RS .nf #!/bin/sh PREREQ="" prereqs() { echo "$PREREQ" } case $1 in prereqs) prereqs exit 0 ;; esac .fi .RE Where PREREQ is modified to list other scripts in the same subdirectory if necessary. .SS Help functions A number of functions (mostly dealing with output) are provided to boot scripts: .TP \fB \fI log_success_msg Logs a success message .RS .PP .B Example: log_success_msg "Frobnication successful" .RE .TP \fB \fI log_failure_msg Logs a failure message .RS .PP .B Example: log_failure_msg "Frobnication component froobz missing" .RE .TP \fB \fI log_warning_msg Logs a warning message .RS .PP .B Example: log_warning_msg "Only partial frobnication possible" .RE .TP \fB \fI log_begin_msg Logs a message that some processing step has begun .TP \fB \fI log_end_msg Logs a message that some processing step is finished .RS .PP .B Example: .PP .RS .nf log_begin_msg "Frobnication begun" # Do something log_end_msg .fi .RE .RE .TP \fB \fI panic Logs an error message and executes a shell in the initramfs image to allow the user to investigate the situation. .RS .PP .B Example: panic "Frobnication failed" .RE .SS Subdirectories Both /usr/share/initramfs-tools/scripts and /etc/initramfs-tools/scripts contains the following subdirectories. .TP \fB \fI init-top the scripts in this directory are the first scripts to be executed after sysfs and procfs have been mounted and /dev/console and /dev/null have been created. No other device files are present yet. .TP \fB \fI init-premount runs the udev hooks for populating the /dev tree (udev will keep running until init-bottom) after modules specified by hooks and /etc/initramfs-tools/modules have been loaded. .TP \fB \fI local-top OR nfs-top After these scripts have been executed, the root device node is expected to be present (local) or the network interface is expected to be usable (NFS). .TP \fB \fI local-premount OR nfs-premount are run after the sanity of the root device has been verified (local) or the network interface has been brought up (NFS), but before the actual root fs has been mounted. .TP \fB \fI local-bottom OR nfs-bottom are run after the rootfs has been mounted (local) or the NFS root share has been mounted. udev is stopped. .TP \fB \fI init-bottom are the last scripts to be executed before procfs and sysfs are moved to the real rootfs and execution is turned over to the init binary which should now be found in the mounted rootfs. .SS Boot parameters .TP \fB \fI /conf/param.conf allows boot scripts to change exported variables that are listed on top of init. Write the new values to it. It will be sourced after an boot script run if it exists. .SH EXAMPLES .SS Hook script An example hook script would look something like this (and would usually be placed in /etc/initramfs-tools/hooks/frobnicate): .RS .nf #!/bin/sh # Example frobnication hook script PREREQ="lvm" prereqs() { echo "$PREREQ" } case $1 in prereqs) prereqs exit 0 ;; esac . /usr/share/initramfs-tools/hook-functions # Begin real processing below this line if [ ! -x "/sbin/frobnicate" ]; then exit 0 fi force_load frobnicator interval=10 cp /sbin/frobnicate "${DESTDIR}/sbin" exit 0 .fi .RE .SS Boot script An example boot script would look something like this (and would usually be placed in /etc/initramfs-tools/scripts/local-top/frobnicate): .RS .nf #!/bin/sh # Example frobnication boot script PREREQ="lvm" prereqs() { echo "$PREREQ" } case $1 in prereqs) prereqs exit 0 ;; esac # Begin real processing below this line if [ ! -x "/sbin/frobnicate" ]; then panic "Frobnication executable not found" fi if [ ! -e "/dev/mapper/frobb" ]; then panic "Frobnication device not found" fi log_begin_msg "Starting frobnication" /sbin/frobnicate "/dev/mapper/frobb" || panic "Frobnication failed" log_end_msg exit 0 .fi .RE .SH DEBUG It is easy to check the generated initramfs for its content. One may need to double-check if it contains the relevant binaries, libs or modules: .RS .nf mkdir tmp/initramfs cd tmp/initramfs gunzip -c -9 /boot/initrd.img-2.6.15-1-686 | \\ cpio -i -d -H newc --no-absolute-filenames .fi .RE .SH AUTHOR The initramfs-tools are written by Jeff Bailey . .PP This manual was written by David H\[:a]rdeman , updated by Maximilian Attems . .SH SEE ALSO .BR initramfs.conf (5), mkinitramfs (8), update-initramfs(8)