From cfd24b14eb2d435d4555e9bc15d68d50bd21c105 Mon Sep 17 00:00:00 2001 From: Jonathan Bakker Date: Sun, 27 Mar 2022 18:01:54 -0700 Subject: regulator: wm8994: Add an off-on delay for WM8994 variant [ Upstream commit 92d96b603738ec4f35cde7198c303ae264dd47cb ] As per Table 130 of the wm8994 datasheet at [1], there is an off-on delay for LDO1 and LDO2. In the wm8958 datasheet [2], I could not find any reference to it. I could not find a wm1811 datasheet to double-check there, but as no one has complained presumably it works without it. This solves the issue on Samsung Aries boards with a wm8994 where register writes fail when the device is powered off and back-on quickly. [1] https://statics.cirrus.com/pubs/proDatasheet/WM8994_Rev4.6.pdf [2] https://statics.cirrus.com/pubs/proDatasheet/WM8958_v3.5.pdf Signed-off-by: Jonathan Bakker Acked-by: Charles Keepax Link: https://lore.kernel.org/r/CY4PR04MB056771CFB80DC447C30D5A31CB1D9@CY4PR04MB0567.namprd04.prod.outlook.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/regulator/wm8994-regulator.c | 42 +++++++++++++++++++++++++++++++++--- 1 file changed, 39 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c index cadea0344486..40befdd9dfa9 100644 --- a/drivers/regulator/wm8994-regulator.c +++ b/drivers/regulator/wm8994-regulator.c @@ -71,6 +71,35 @@ static const struct regulator_ops wm8994_ldo2_ops = { }; static const struct regulator_desc wm8994_ldo_desc[] = { + { + .name = "LDO1", + .id = 1, + .type = REGULATOR_VOLTAGE, + .n_voltages = WM8994_LDO1_MAX_SELECTOR + 1, + .vsel_reg = WM8994_LDO_1, + .vsel_mask = WM8994_LDO1_VSEL_MASK, + .ops = &wm8994_ldo1_ops, + .min_uV = 2400000, + .uV_step = 100000, + .enable_time = 3000, + .off_on_delay = 36000, + .owner = THIS_MODULE, + }, + { + .name = "LDO2", + .id = 2, + .type = REGULATOR_VOLTAGE, + .n_voltages = WM8994_LDO2_MAX_SELECTOR + 1, + .vsel_reg = WM8994_LDO_2, + .vsel_mask = WM8994_LDO2_VSEL_MASK, + .ops = &wm8994_ldo2_ops, + .enable_time = 3000, + .off_on_delay = 36000, + .owner = THIS_MODULE, + }, +}; + +static const struct regulator_desc wm8958_ldo_desc[] = { { .name = "LDO1", .id = 1, @@ -172,9 +201,16 @@ static int wm8994_ldo_probe(struct platform_device *pdev) * regulator core and we need not worry about it on the * error path. */ - ldo->regulator = devm_regulator_register(&pdev->dev, - &wm8994_ldo_desc[id], - &config); + if (ldo->wm8994->type == WM8994) { + ldo->regulator = devm_regulator_register(&pdev->dev, + &wm8994_ldo_desc[id], + &config); + } else { + ldo->regulator = devm_regulator_register(&pdev->dev, + &wm8958_ldo_desc[id], + &config); + } + if (IS_ERR(ldo->regulator)) { ret = PTR_ERR(ldo->regulator); dev_err(wm8994->dev, "Failed to register LDO%d: %d\n", -- cgit v1.2.3