Age | Commit message (Collapse) | Author |
|
VM_SHARED mappings are currently forbidden in a memslot with MTE to
prevent two VMs racing to sanitise the same page. However, this check
is performed while holding current->mm's mmap_lock, but fails to release
it. Fix this by releasing the lock when needed.
Fixes: ea7fc1bb1cd1 ("KVM: arm64: Introduce MTE VM feature")
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211005122031.809857-1-qperret@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.15
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
|
|
Add a new stat that counts the number of times a remote TLB flush is
requested, regardless of whether it kicks vCPUs out of guest mode. This
allows us to look at how often flushes are initiated.
Unlike remote_tlb_flush, this one applies to ARM's instruction-set-based
TLB flush implementation, so apply it there too.
Original-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210817002639.3856694-1-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
* kvm-arm64/mmu/vmid-cleanups:
: Cleanup the stage-2 configuration by providing a single helper,
: and tidy up some of the ordering requirements for the VMID
: allocator.
KVM: arm64: Upgrade VMID accesses to {READ,WRITE}_ONCE
KVM: arm64: Unify stage-2 programming behind __load_stage2()
KVM: arm64: Move kern_hyp_va() usage in __load_guest_stage2() into the callers
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/mmu/el2-tracking: (25 commits)
: Enable tracking of page sharing between host EL1 and EL2
KVM: arm64: Minor optimization of range_is_memory
KVM: arm64: Make hyp_panic() more robust when protected mode is enabled
KVM: arm64: Return -EPERM from __pkvm_host_share_hyp()
KVM: arm64: Make __pkvm_create_mappings static
KVM: arm64: Restrict EL2 stage-1 changes in protected mode
KVM: arm64: Refactor protected nVHE stage-1 locking
KVM: arm64: Remove __pkvm_mark_hyp
KVM: arm64: Mark host bss and rodata section as shared
KVM: arm64: Enable retrieving protections attributes of PTEs
KVM: arm64: Introduce addr_is_memory()
KVM: arm64: Expose pkvm_hyp_id
KVM: arm64: Expose host stage-2 manipulation helpers
KVM: arm64: Add helpers to tag shared pages in SW bits
KVM: arm64: Allow populating software bits
KVM: arm64: Enable forcing page-level stage-2 mappings
KVM: arm64: Tolerate re-creating hyp mappings to set software bits
KVM: arm64: Don't overwrite software bits with owner id
KVM: arm64: Rename KVM_PTE_LEAF_ATTR_S2_IGNORED
KVM: arm64: Optimize host memory aborts
KVM: arm64: Expose page-table helpers
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/misc-5.15:
: Misc improvements for 5.15:
:
: - Account the number of VMID-wide TLB invalidations as
: remote TLB flushes
: - Fix comments in the VGIC code
: - Cleanup the PMU IMPDEF identification
: - Streamline the TGRAN2 usage
: - Avoid advertising a 52bit IPA range for non-64KB configs
: - Avoid spurious signalling when a HW-mapped interrupt is in the
: A+P state on entry, and in the P state on exit, but that the
: physical line is not pending anymore.
: - Bunch of minor cleanups
KVM: arm64: vgic: Resample HW pending state on deactivation
KVM: arm64: vgic: Drop WARN from vgic_get_irq
KVM: arm64: Drop unused REQUIRES_VIRT
KVM: arm64: Drop check_kvm_target_cpu() based percpu probe
KVM: arm64: Drop init_common_resources()
KVM: arm64: Use ARM64_MIN_PARANGE_BITS as the minimum supported IPA
arm64/mm: Add remaining ID_AA64MMFR0_PARANGE_ macros
KVM: arm64: Restrict IPA size to maximum 48 bits on 4K and 16K page size
arm64/mm: Define ID_AA64MMFR0_TGRAN_2_SHIFT
KVM: arm64: perf: Replace '0xf' instances with ID_AA64DFR0_PMUVER_IMP_DEF
KVM: arm64: Fix comments related to GICv2 PMR reporting
KVM: arm64: Count VMID-wide TLB invalidations
arm64/kexec: Test page size support with new TGRAN range values
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Since TLB invalidation can run in parallel with VMID allocation,
we need to be careful and avoid any sort of load/store tearing.
Use {READ,WRITE}_ONCE consistently to avoid any surprise.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jade Alglave <jade.alglave@arm.com>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20210806113109.2475-6-will@kernel.org
|
|
The host kernel is currently able to change EL2 stage-1 mappings without
restrictions thanks to the __pkvm_create_mappings() hypercall. But in a
world where the host is no longer part of the TCB, this clearly poses a
problem.
To fix this, introduce a new hypercall to allow the host to share a
physical memory page with the hypervisor, and remove the
__pkvm_create_mappings() variant. The new hypercall implements
ownership and permission checks before allowing the sharing operation,
and it annotates the shared page in the hypervisor stage-1 and host
stage-2 page-tables.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210809152448.1810400-21-qperret@google.com
|
|
KVM/ARM has an architecture-specific implementation of
kvm_flush_remote_tlbs; however, unlike the generic one,
it does not count the flushes in kvm->stat.remote_tlb_flush,
so that it inexorably remained stuck to zero.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210727103251.16561-1-pbonzini@redhat.com
|
|
When mapping a THP, we are guaranteed that the page isn't reserved,
and we can safely avoid the kvm_is_reserved_pfn() call.
Replace kvm_get_pfn() with get_page(pfn_to_page()).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210726153552.1535838-6-maz@kernel.org
|
|
Since we only support PMD-sized mappings for THP, getting
a permission fault on a level that results in a mapping
being larger than PAGE_SIZE is a sure indication that we have
already upgraded our mapping to a PMD.
In this case, there is no need to try and parse userspace page
tables, as the fault information already tells us everything.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20210726153552.1535838-4-maz@kernel.org
|
|
We currently rely on the kvm_is_transparent_hugepage() helper to
discover whether a given page has the potential to be mapped as
a block mapping.
However, this API doesn't really give un everything we want:
- we don't get the size: this is not crucial today as we only
support PMD-sized THPs, but we'd like to have larger sizes
in the future
- we're the only user left of the API, and there is a will
to remove it altogether
To address the above, implement a simple walker using the existing
page table infrastructure, and plumb it into transparent_hugepage_adjust().
No new page sizes are supported in the process.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20210726153552.1535838-3-maz@kernel.org
|
|
When merging the KVM MTE support, the blob that was interposed between
the chair and the keyboard experienced a neuronal accident (also known
as a brain fart), turning a check for VM_SHARED into VM_PFNMAP as it
was reshuffling some of the code.
The blob having now come back to its senses, let's restore the
initial check that the original author got right the first place.
Fixes: ea7fc1bb1cd1 ("KVM: arm64: Introduce MTE VM feature")
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210713114804.594993-1-maz@kernel.org
|
|
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
|
|
The intended semantics of pfn_valid() is to verify whether there is a
struct page for the pfn in question and nothing else.
Yet, on arm64 it is used to distinguish memory areas that are mapped in
the linear map vs those that require ioremap() to access them.
Introduce a dedicated pfn_is_map_memory() wrapper for
memblock_is_map_memory() to perform such check and use it where
appropriate.
Using a wrapper allows to avoid cyclic include dependencies.
While here also update style of pfn_valid() so that both pfn_valid() and
pfn_is_map_memory() declarations will be consistent.
Link: https://lkml.kernel.org/r/20210511100550.28178-4-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge misc updates from Andrew Morton:
"191 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (191 commits)
mm,hwpoison: make get_hwpoison_page() call get_any_page()
mm,hwpoison: send SIGBUS with error virutal address
mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
docs: remove description of DISCONTIGMEM
arch, mm: remove stale mentions of DISCONIGMEM
mm: remove CONFIG_DISCONTIGMEM
m68k: remove support for DISCONTIGMEM
arc: remove support for DISCONTIGMEM
arc: update comment about HIGHMEM implementation
alpha: remove DISCONTIGMEM and NUMA
mm/page_alloc: move free_the_page
mm/page_alloc: fix counting of managed_pages
mm/page_alloc: improve memmap_pages dbg msg
mm: drop SECTION_SHIFT in code comments
mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
mm/page_alloc: scale the number of pages that are batch freed
...
|
|
vma_lookup() finds the vma of a specific address with a cleaner interface
and is more readable.
Link: https://lkml.kernel.org/r/20210521174745.2219620-5-Liam.Howlett@Oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
KVM/arm64 support for MTE, courtesy of Steven Price.
It allows the guest to use memory tagging, and offers
a new userspace API to save/restore the tags.
* kvm-arm64/mmu/mte:
KVM: arm64: Document MTE capability and ioctl
KVM: arm64: Add ioctl to fetch/store tags in a guest
KVM: arm64: Expose KVM_ARM_CAP_MTE
KVM: arm64: Save/restore MTE registers
KVM: arm64: Introduce MTE VM feature
arm64: mte: Sync tags for pages where PTE is untagged
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add a new VM feature 'KVM_ARM_CAP_MTE' which enables memory tagging
for a VM. This will expose the feature to the guest and automatically
tag memory pages touched by the VM as PG_mte_tagged (and clear the tag
storage) to ensure that the guest cannot see stale tags, and so that
the tags are correctly saved/restored across swap.
Actually exposing the new capability to user space happens in a later
patch.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
[maz: move VM_SHARED sampling into the critical section]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210621111716.37157-3-steven.price@arm.com
|
|
Cache maintenance updates from Yanan Wang, moving the CMOs
down into the page-table code. This ensures that we only issue
them when actually performing a mapping rather than upfront.
* kvm-arm64/mmu/stage2-cmos:
KVM: arm64: Move guest CMOs to the fault handlers
KVM: arm64: Tweak parameters of guest cache maintenance functions
KVM: arm64: Introduce mm_ops member for structure stage2_attr_data
KVM: arm64: Introduce two cache maintenance callbacks
|
|
We currently uniformly perform CMOs of D-cache and I-cache in function
user_mem_abort before calling the fault handlers. If we get concurrent
guest faults(e.g. translation faults, permission faults) or some really
unnecessary guest faults caused by BBM, CMOs for the first vcpu are
necessary while the others later are not.
By moving CMOs to the fault handlers, we can easily identify conditions
where they are really needed and avoid the unnecessary ones. As it's a
time consuming process to perform CMOs especially when flushing a block
range, so this solution reduces much load of kvm and improve efficiency
of the stage-2 page table code.
We can imagine two specific scenarios which will gain much benefit:
1) In a normal VM startup, this solution will improve the efficiency of
handling guest page faults incurred by vCPUs, when initially populating
stage-2 page tables.
2) After live migration, the heavy workload will be resumed on the
destination VM, however all the stage-2 page tables need to be rebuilt
at the moment. So this solution will ease the performance drop during
resuming stage.
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210617105824.31752-5-wangyanan55@huawei.com
|
|
Adjust the parameter "kvm_pfn_t pfn" of __clean_dcache_guest_page
and __invalidate_icache_guest_page to "void *va", which paves the
way for converting these two guest CMO functions into callbacks in
structure kvm_pgtable_mm_ops. No functional change.
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210617105824.31752-4-wangyanan55@huawei.com
|
|
The MMIO region of a device maybe huge (GB level), try to use
block mapping in stage2 to speedup both map and unmap.
Compared to normal memory mapping, we should consider two more
points when try block mapping for MMIO region:
1. For normal memory mapping, the PA(host physical address) and
HVA have same alignment within PUD_SIZE or PMD_SIZE when we use
the HVA to request hugepage, so we don't need to consider PA
alignment when verifing block mapping. But for device memory
mapping, the PA and HVA may have different alignment.
2. For normal memory mapping, we are sure hugepage size properly
fit into vma, so we don't check whether the mapping size exceeds
the boundary of vma. But for device memory mapping, we should pay
attention to this.
This adds get_vma_page_shift() to get page shift for both normal
memory and device MMIO region, and check these two points when
selecting block mapping size for MMIO region.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210507110322.23348-3-zhukeqian1@huawei.com
|
|
The MMIO regions may be unmapped for many reasons and can be remapped
by stage2 fault path. Map MMIO regions at creation time becomes a
minor optimization and makes these two mapping path hard to sync.
Remove the mapping code while keep the useful sanity check.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210507110322.23348-2-zhukeqian1@huawei.com
|
|
arch/arm64/kvm/mmu.c:1114:9-10: WARNING: return of 0/1 in function 'kvm_age_gfn' with return type bool
arch/arm64/kvm/mmu.c:1084:9-10: WARNING: return of 0/1 in function 'kvm_set_spte_gfn' with return type bool
arch/arm64/kvm/mmu.c:1127:9-10: WARNING: return of 0/1 in function 'kvm_test_age_gfn' with return type bool
arch/arm64/kvm/mmu.c:1070:9-10: WARNING: return of 0/1 in function 'kvm_unmap_gfn_range' with return type bool
Return statements in functions returning bool should use
true/false instead of 1/0.
Generated by: scripts/coccinelle/misc/boolreturn.cocci
Fixes: cd4c71835228 ("KVM: arm64: Convert to the gfn-based MMU notifier callbacks")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210426223357.GA45871@cd4295a34ed8
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.13
New features:
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
- Alexandru is now a reviewer (not really a new feature...)
Fixes:
- Proper emulation of the GICR_TYPER register
- Handle the complete set of relocation in the nVHE EL2 object
- Get rid of the oprofile dependency in the PMU code (and of the
oprofile body parts at the same time)
- Debug and SPE fixes
- Fix vcpu reset
|
|
Move arm64 to the gfn-base MMU notifier APIs, which do the hva->gfn
lookup in common code.
No meaningful functional change intended, though the exact order of
operations is slightly different since the memslot lookups occur before
calling into arch code.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210402005658.3024832-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move arm64's MMU notifier trace events into common code in preparation
for doing the hva->gfn lookup in common code. The alternative would be
to trace the gfn instead of hva, but that's not obviously better and
could also be done in common code. Tracing the notifiers is also quite
handy for debug regardless of architecture.
Remove a completely redundant tracepoint from PPC e500.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We needn't retrieve the memory slot again in user_mem_abort() because
the corresponding memory slot has been passed from the caller. This
would save some CPU cycles. For example, the time used to write 1GB
memory, which is backed by 2MB hugetlb pages and write-protected, is
dropped by 6.8% from 928ms to 864ms.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210316041126.81860-4-gshan@redhat.com
|
|
find_vma_intersection() has been existing to search the intersected
vma. This uses the function where it's applicable, to simplify the
code.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210316041126.81860-3-gshan@redhat.com
|
|
We needn't expose the function as it's only used by mmu.c since it
was introduced by commit c64735554c0a ("KVM: arm: Add initial dirty
page locking support").
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210316041126.81860-2-gshan@redhat.com
|
|
In order to make use of the stage 2 pgtable code for the host stage 2,
change kvm_s2_mmu to use a kvm_arch pointer in lieu of the kvm pointer,
as the host will have the former but not the latter.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-21-qperret@google.com
|
|
In order to make use of the stage 2 pgtable code for the host stage 2,
use struct kvm_arch in lieu of struct kvm as the host will have the
former but not the latter.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-20-qperret@google.com
|
|
Previous commits have introduced infrastructure to enable the EL2 code
to manage its own stage 1 mappings. However, this was preliminary work,
and none of it is currently in use.
Put all of this together by elevating the mapping creation at EL2 when
memory protection is enabled. In this case, the host kernel running
at EL1 still creates _temporary_ EL2 mappings, only used while
initializing the hypervisor, but frees them right after.
As such, all calls to create_hyp_mappings() after kvm init has finished
turn into hypercalls, as the host now has no 'legal' way to modify the
hypevisor page tables directly.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-19-qperret@google.com
|
|
In preparation for enabling the creation of page-tables at EL2, factor
all memory allocation out of the page-table code, hence making it
re-usable with any compatible memory allocator.
No functional changes intended.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-7-qperret@google.com
|
|
When registering a memslot, we check the size and location of that
memslot against the IPA size to ensure that we can provide guest
access to the whole of the memory.
Unfortunately, this check rejects memslot that end-up at the exact
limit of the addressing capability for a given IPA size. For example,
it refuses the creation of a 2GB memslot at 0x8000000 with a 32bit
IPA space.
Fix it by relaxing the check to accept a memslot reaching the
limit of the IPA space.
Fixes: c3058d5da222 ("arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZE")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20210311100016.3830038-3-maz@kernel.org
|
|
We now set the pfn dirty and mark the page dirty before calling fault
handlers in user_mem_abort(), so we might end up having spurious dirty
pages if update of permissions or mapping has failed. Let's move these
two operations after the fault handlers, and they will be done only if
the fault has been handled successfully.
When an -EAGAIN errno is returned from the map handler, we hope to the
vcpu to enter guest directly instead of exiting back to userspace, so
adjust the return value at the end of function.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210114121350.123684-4-wangyanan55@huawei.com
|
|
Pull KVM updates from Paolo Bonzini:
"Much x86 work was pushed out to 5.12, but ARM more than made up for it.
ARM:
- PSCI relay at EL2 when "protected KVM" is enabled
- New exception injection code
- Simplification of AArch32 system register handling
- Fix PMU accesses when no PMU is enabled
- Expose CSV3 on non-Meltdown hosts
- Cache hierarchy discovery fixes
- PV steal-time cleanups
- Allow function pointers at EL2
- Various host EL2 entry cleanups
- Simplification of the EL2 vector allocation
s390:
- memcg accouting for s390 specific parts of kvm and gmap
- selftest for diag318
- new kvm_stat for when async_pf falls back to sync
x86:
- Tracepoints for the new pagetable code from 5.10
- Catch VFIO and KVM irqfd events before userspace
- Reporting dirty pages to userspace with a ring buffer
- SEV-ES host support
- Nested VMX support for wait-for-SIPI activity state
- New feature flag (AVX512 FP16)
- New system ioctl to report Hyper-V-compatible paravirtualization features
Generic:
- Selftest improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits)
KVM: SVM: fix 32-bit compilation
KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting
KVM: SVM: Provide support to launch and run an SEV-ES guest
KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests
KVM: SVM: Provide support for SEV-ES vCPU loading
KVM: SVM: Provide support for SEV-ES vCPU creation/loading
KVM: SVM: Update ASID allocation to support SEV-ES guests
KVM: SVM: Set the encryption mask for the SVM host save area
KVM: SVM: Add NMI support for an SEV-ES guest
KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest
KVM: SVM: Do not report support for SMM for an SEV-ES guest
KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES
KVM: SVM: Add support for CR8 write traps for an SEV-ES guest
KVM: SVM: Add support for CR4 write traps for an SEV-ES guest
KVM: SVM: Add support for CR0 write traps for an SEV-ES guest
KVM: SVM: Add support for EFER write traps for an SEV-ES guest
KVM: SVM: Support string IO operations for an SEV-ES guest
KVM: SVM: Support MMIO for an SEV-ES guest
KVM: SVM: Create trace events for VMGEXIT MSR protocol processing
KVM: SVM: Create trace events for VMGEXIT processing
...
|
|
If we get a FSC_PERM fault, just using (logging_active && writable) to
determine calling kvm_pgtable_stage2_map(). There will be two more cases
we should consider.
(1) After logging_active is configged back to false from true. When we
get a FSC_PERM fault with write_fault and adjustment of hugepage is needed,
we should merge tables back to a block entry. This case is ignored by still
calling kvm_pgtable_stage2_relax_perms(), which will lead to an endless
loop and guest panic due to soft lockup.
(2) We use (FSC_PERM && logging_active && writable) to determine
collapsing a block entry into a table by calling kvm_pgtable_stage2_map().
But sometimes we may only need to relax permissions when trying to write
to a page other than a block.
In this condition,using kvm_pgtable_stage2_relax_perms() will be fine.
The ISS filed bit[1:0] in ESR_EL2 regesiter indicates the stage2 lookup
level at which a D-abort or I-abort occurred. By comparing granule of
the fault lookup level with vma_pagesize, we can strictly distinguish
conditions of calling kvm_pgtable_stage2_relax_perms() or
kvm_pgtable_stage2_map(), and the above two cases will be well considered.
Suggested-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201201201034.116760-4-wangyanan55@huawei.com
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Linux 5.10-rc1
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In an effort to remove the vcpu PC manipulations from EL1 on nVHE
systems, move kvm_skip_instr() to be HYP-specific. EL1's intent
to increment PC post emulation is now signalled via a flag in the
vcpu structure.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
There is no need to feed the result of kvm_vcpu_trap_il_is32bit()
to kvm_skip_instr(), as only AArch32 has a variable length ISA, and
this helper can equally be called from kvm_skip_instr32(), reducing
the complexity at all the call sites.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for v5.10, take #2
- Fix compilation error when PMD and PUD are folded
- Fix regresssion of the RAZ behaviour of ID_AA64ZFR0_EL1
|
|
The PUD and PMD are folded into PGD when the following options are
enabled. In that case, PUD_SHIFT is equal to PMD_SHIFT and we fail
to build with the indicated errors:
CONFIG_ARM64_VA_BITS_42=y
CONFIG_ARM64_PAGE_SHIFT=16
CONFIG_PGTABLE_LEVELS=3
arch/arm64/kvm/mmu.c: In function ‘user_mem_abort’:
arch/arm64/kvm/mmu.c:798:2: error: duplicate case value
case PMD_SHIFT:
^~~~
arch/arm64/kvm/mmu.c:791:2: note: previously used here
case PUD_SHIFT:
^~~~
This fixes the issue by skipping the check on PUD huge page when PUD
and PMD are folded into PGD.
Fixes: 2f40c46021bbb ("KVM: arm64: Use fallback mapping sizes for contiguous huge page sizes")
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201103003009.32955-1-gshan@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.10, take #1
- Force PTE mapping on device pages provided via VFIO
- Fix detection of cacheable mapping at S2
- Fallback to PMD/PTE mappings for composite huge pages
- Fix accounting of Stage-2 PGD allocation
- Fix AArch32 handling of some of the debug registers
- Simplify host HYP entry
- Fix stray pointer conversion on nVHE TLB invalidation
- Fix initialization of the nVHE code
- Simplify handling of capabilities exposed to HYP
- Nuke VCPUs caught using a forbidden AArch32 EL0
|
|
VFIO allows a device driver to resolve a fault by mapping a MMIO
range. This can be subsequently result in user_mem_abort() to
try and compute a huge mapping based on the MMIO pfn, which is
a sure recipe for things to go wrong.
Instead, force a PTE mapping when the pfn faulted in has a device
mapping.
Fixes: 6d674e28f642 ("KVM: arm/arm64: Properly handle faulting of device mappings")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Santosh Shukla <sashukla@nvidia.com>
[maz: rewritten commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1603711447-11998-2-git-send-email-sashukla@nvidia.com
|
|
Although huge pages can be created out of multiple contiguous PMDs
or PTEs, the corresponding sizes are not supported at Stage-2 yet.
Instead of failing the mapping, fall back to the nearer supported
mapping size (CONT_PMD to PMD and CONT_PTE to PTE respectively).
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
[maz: rewritten commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201025230626.18501-1-gshan@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.10
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
|