aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/hisilicon
AgeCommit message (Collapse)Author
2020-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "Some merge window fallout, some longer term fixes: 1) Handle headroom properly in lapbether and x25_asy drivers, from Xie He. 2) Fetch MAC address from correct r8152 device node, from Thierry Reding. 3) In the sw kTLS path we should allow MSG_CMSG_COMPAT in sendmsg, from Rouven Czerwinski. 4) Correct fdputs in socket layer, from Miaohe Lin. 5) Revert troublesome sockptr_t optimization, from Christoph Hellwig. 6) Fix TCP TFO key reading on big endian, from Jason Baron. 7) Missing CAP_NET_RAW check in nfc, from Qingyu Li. 8) Fix inet fastreuse optimization with tproxy sockets, from Tim Froidcoeur. 9) Fix 64-bit divide in new SFC driver, from Edward Cree. 10) Add a tracepoint for prandom_u32 so that we can more easily perform usage analysis. From Eric Dumazet. 11) Fix rwlock imbalance in AF_PACKET, from John Ogness" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits) net: openvswitch: introduce common code for flushing flows af_packet: TPACKET_V3: fix fill status rwlock imbalance random32: add a tracepoint for prandom_u32() Revert "ipv4: tunnel: fix compilation on ARCH=um" net: accept an empty mask in /sys/class/net/*/queues/rx-*/rps_cpus net: ethernet: stmmac: Disable hardware multicast filter net: stmmac: dwmac1000: provide multicast filter fallback ipv4: tunnel: fix compilation on ARCH=um vsock: fix potential null pointer dereference in vsock_poll() sfc: fix ef100 design-param checking net: initialize fastreuse on inet_inherit_port net: refactor bind_bucket fastreuse into helper net: phy: marvell10g: fix null pointer dereference net: Fix potential memory leak in proto_register() net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init ionic_lif: Use devm_kcalloc() in ionic_qcq_alloc() net/nfc/rawsock.c: add CAP_NET_RAW check. hinic: fix strncpy output truncated compile warnings drivers/net/wan/x25_asy: Added needed_headroom and a skb->len check net/tls: Fix kmap usage ...
2020-08-07mm, treewide: rename kzfree() to kfree_sensitive()Waiman Long
As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-06net: hns3: fix spelling mistake "could'nt" -> "couldn't"Colin Ian King
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Resolved kernel/bpf/btf.c using instructions from merge commit 69138b34a7248d2396ab85c8652e20c0c39beaba Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: hns3: fix for VLAN config when reset failedGuojia Liao
When device is resetting or reset failed, firmware is unable to handle mailbox. VLAN should not be configured in this case. Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed") Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: hns3: fix aRFS FD rules leftover after add a user FD ruleGuojia Liao
When user had created a FD rule, all the aRFS rules should be clear up. HNS3 process flow as below: 1.get spin lock of fd_ruls_list 2.clear up all aRFS rules 3.release lock 4.get spin lock of fd_ruls_list 5.creat a rules 6.release lock; There is a short period of time between step 3 and step 4, which would creatting some new aRFS FD rules if driver was receiving packet. So refactor the fd_rule_lock to fix it. Fixes: 441228875706 ("net: hns3: refine the flow director handle") Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: hns3: add reset check for VF updating port based VLANJian Shen
Currently hclgevf_update_port_base_vlan_info() may be called when VF is resetting, which may cause hns3_nic_net_open() being called twice unexpectedly. So fix it by adding a reset check for it, and extend critical region for rntl_lock in hclgevf_update_port_base_vlan_info(). Fixes: 92f11ea177cd ("net: hns3: fix set port based VLAN issue for VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: hns3: fix a TX timeout issueYonglong Liu
When the queue depth and queue parameters are modified, there is a low probability that TX timeout occurs. The two operations cause the link to be down or up when the watchdog is still working. All queues are stopped when the link is down. After the carrier is on, all queues are woken up. If the watchdog detects the link between the carrier on and wakeup queues, a false TX timeout occurs. So fix this issue by modifying the sequence of carrier on and queue wakeup, which is symmetrical to the link down action. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: hns3: fix desc filling bug when skb is expanded or linearedYunsheng Lin
The linear and frag data part may be changed when the skb is expanded or lineared in skb_cow_head() or skb_checksum_help(), which is called by hns3_fill_skb_desc(), so the linear len return by skb_headlen() before the calling of hns3_fill_skb_desc() is unreliable. Move hns3_fill_skb_desc() before the calling of skb_headlen() to fix this bug. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The UDP reuseport conflict was a little bit tricky. The net-next code, via bpf-next, extracted the reuseport handling into a helper so that the BPF sk lookup code could invoke it. At the same time, the logic for reuseport handling of unconnected sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace which changed the logic to carry on the reuseport result into the rest of the lookup loop if we do not return immediately. This requires moving the reuseport_has_conns() logic into the callers. While we are here, get rid of inline directives as they do not belong in foo.c files. The other changes were cases of more straightforward overlapping modifications. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24net: hix5hd2_gmac: Remove unneeded cast from memory allocationWang Hai
Remove casting the values returned by memory allocation function. Coccinelle emits WARNING: ./drivers/net/ethernet/hisilicon/hix5hd2_gmac.c:1027:9-23: WARNING: casting value returned by memory allocation function to (struct sg_desc *) is useless. This issue was detected by using the Coccinelle software. Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net: hns3: fix return value error when query MAC link status failJian Shen
Currently, PF queries the MAC link status per second by calling function hclge_get_mac_link_status(). It return the error code when failed to send cmdq command to firmware. It's incorrect, because this return value is used as the MAC link status, which 0 means link down, and none-zero means link up. So fixes it. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net: hns3: fix error handling for desc fillingYunsheng Lin
The content of the TX desc is automatically cleared by the HW when the HW has sent out the packet to the wire. When desc filling fails in hns3_nic_net_xmit(), it will call hns3_clear_desc() to do the error handling, which miss zeroing of the TX desc and the checking if a unmapping is needed. So add the zeroing and checking in hns3_clear_desc() to avoid the above problem. Also add DESC_TYPE_UNKNOWN to indicate the info in desc_cb is not valid, because hns3_nic_reclaim_desc() may treat the desc_cb->type of zero as packet and add to the sent pkt statistics accordingly. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net: hns3: fix for not calculating TX BD send size correctlyYunsheng Lin
With GRO and fraglist support, the SKB can be aggregated to a total size of 65535, and when that SKB is forwarded through a bridge, the size of the SKB may be pushed to exceed the size of 65535 when br_dev_queue_push_xmit() is called. The max send size of BD supported by the HW is 65535, when a SKB with a headlen of over 65535 is sent to the driver, the driver needs to use multi BD to send the linear data, and the send size of the last BD is calculated incorrectly by the driver who is using '&' operation, which causes a TX error. Use '%' operation to fix this problem. Fixes: 3fe13ed95dd3 ("net: hns3: avoid mult + div op in critical data path") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net: hns3: fix for not unmapping TX buffer correctlyYunsheng Lin
When a big TX buffer is sent using multi BD, the driver maps the whole TX buffer, and unmaps it using info in desc_cb corresponding to each BD, but only the info in the desc_cb of first BD is correct, other info in desc_cb is wrong, which causes TX unmapping problem when SMMU is on. Only set the mapping and freeing info in the desc_cb of first BD to fix this problem, because the TX buffer only need to be unmapped and freed once. Fixes: 1e8a7977d09f("net: hns3: add handling for big TX fragment") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huzhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: hns: use eth_broadcast_addr() to assign broadcast addressXu Wang
This patch is to use eth_broadcast_addr() to assign broadcast address insetad of memset(). Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
All conflicts seemed rather trivial, with some guidance from Saeed Mameed on the tc_ct.c one. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06net: hns3: fix use-after-free when doing self testYonglong Liu
Enable promisc mode of PF, set VF link state to enable, and run iperf of the VF, then do self test of the PF. The self test will fail with a low frequency, and may cause a use-after-free problem. [ 87.142126] selftest:000004a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 87.159722] ================================================================== [ 87.174187] BUG: KASAN: use-after-free in hex_dump_to_buffer+0x140/0x608 [ 87.187600] Read of size 1 at addr ffff003b22828000 by task ethtool/1186 [ 87.201012] [ 87.203978] CPU: 7 PID: 1186 Comm: ethtool Not tainted 5.5.0-rc4-gfd51c473-dirty #4 [ 87.219306] Hardware name: Huawei TaiShan 2280 V2/BC82AMDA, BIOS TA BIOS 2280-A CS V2.B160.01 01/15/2020 [ 87.238292] Call trace: [ 87.243173] dump_backtrace+0x0/0x280 [ 87.250491] show_stack+0x24/0x30 [ 87.257114] dump_stack+0xe8/0x140 [ 87.263911] print_address_description.isra.8+0x70/0x380 [ 87.274538] __kasan_report+0x12c/0x230 [ 87.282203] kasan_report+0xc/0x18 [ 87.288999] __asan_load1+0x60/0x68 [ 87.295969] hex_dump_to_buffer+0x140/0x608 [ 87.304332] print_hex_dump+0x140/0x1e0 [ 87.312000] hns3_lb_check_skb_data+0x168/0x170 [ 87.321060] hns3_clean_rx_ring+0xa94/0xfe0 [ 87.329422] hns3_self_test+0x708/0x8c0 The length of packet sent by the selftest process is only 128 + 14 bytes, and the min buffer size of a BD is 256 bytes, and the receive process will make sure the packet sent by the selftest process is in the linear part, so only check the linear part in hns3_lb_check_skb_data(). So fix this use-after-free by using skb_headlen() to dump skb->data instead of skb->len. Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06net: hns3: add a missing uninit debugfs when unload driverHuazhong Tan
When unloading driver, if flag HNS3_NIC_STATE_INITED has been already cleared, the debugfs will not be uninitialized, so fix it. Fixes: b2292360bb2a ("net: hns3: Add debugfs framework registration") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06net: hns3: fix for mishandle of asserting VF reset failHuazhong Tan
When asserts VF reset fail, flag HCLGEVF_STATE_CMD_DISABLE and handshake status should not set, otherwise the retry will fail. So adds a check for asserting VF reset and returns directly when fails. Fixes: ef5f8e507ec9 ("net: hns3: stop handling command queue while resetting VF") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06net: hns3: check reset pending after FLR prepareHuazhong Tan
If there is a PF reset pending before FLR prepare, FLR's preparatory work will not fail, but the FLR rebuild procedure will fail for this pending. So this PF reset pending should be handled in the FLR preparatory. Fixes: 8627bdedc435 ("net: hns3: refactor the precedure of PF FLR") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor overlapping changes in xfrm_device.c, between the double ESP trailing bug fix setting the XFRM_INIT flag and the changes in net-next preparing for bonding encryption support. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25hns: do not cast return value of napi_gro_receive to nullJason A. Donenfeld
Basically no drivers care about the return value here, and there's no __must_check that would make casting to void sensible, so remove it. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18net: hns3: streaming dma buffer sync between cpu and deviceBarry Song
Right now they are empty functions for our SoC since hardware can keep cache coherent, but it is still good to align with streaming DMA APIs as device drivers should not make an assumption of SoC. Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18net: hns3: replace disable_irq by IRQ_NOAUTOEN flagBarry Song
disable_irq() after request_irq() is still risk as there is a chance irq can come after request_irq() and before disable_irq(). this should be done by IRQ_NOAUTOEN flag. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18net: hns3: rename buffer-related functionsBarry Song
This is for improving the readability. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18net: hns3: pointer type of buffer should be voidBarry Song
Move the type of buffer address from unsigned char to void Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18net: hns3: remove unnecessary devm_kfreeBarry Song
since we are using device-managed function, it is unnecessary to free in probe. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-30net: hns3: remove some unused codes in hns3_nic_set_features()Huazhong Tan
NETIF_F_HW_VLAN_CTAG_FILTER is not set in netdev->hw_feature for the HNS3 driver, so the handler of NETIF_F_HW_VLAN_CTAG_FILTER in hns3_nic_set_features() won't be called, remove it. Reported-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: hns3: fix two coding style issues in hclgevf_main.cHuazhong Tan
Remove a redundant blank line in hclgevf_cmd_set_promisc_mode(), and fix a reverse xmas tree coding style issue in hclgevf_set_rss_tc_mode(). Reported-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: hns3: fix an incorrect comment for num_tqps in struct hclgevf_devHuazhong Tan
struct hclgevf_dev stands for VF device, its field num_tqps indicates the number of VF's task queue pairs, so the comment is incorrect, replace 'PF' with 'VF'. Reported-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: hns3: remove two unused macros in hclgevf_cmd.cHuazhong Tan
Macro hclgevf_ring_to_dma_dir and hclgevf_is_csq defined in hclgevf_cmd.c, but not used, so remove them. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: hns3: remove an unused macro hclge_is_csqHuazhong Tan
Macro hclge_is_csq defined in hcgle_cmd.c has not been used, so remove it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30net: hns3: fix a print format issue in hclge_mac_mdio_config()Huazhong Tan
Use %d to print int variable 'ret' in hclge_mac_mdio_config(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: print out speed info when parsing speed failsHuazhong Tan
When calling hclge_parse_speed() fails, printing out the speed is helpful for debugging. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove some unused fields in struct hclge_devHuazhong Tan
Remove some fields in struct hclge_dev which have not been used. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove two duplicated register macros in hclgevf_main.hHuazhong Tan
HCLGEVF_CMDQ_INTR_SRC_REG and HCLGEVF_CMDQ_INTR_STS_REG are same as HCLGEVF_VECTOR0_CMDQ_SRC_REG and HCLGEVF_VECTOR0_CMDQ_STAT_REG, replace the former with the latter, and rename macro HCLGEVF_VECTOR0_CMDQ_STAT_REG since 'stat' is not abbreviation of 'state'. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove unused struct hnae3_unic_private_infoHuazhong Tan
Since field .uinfo in struct hnae3_handle never be used, so remove it and its structure definition. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3; remove unused HNAE3_RESTORE_CLIENT in enum hnae3_reset_notify_typeHuazhong Tan
Remove HNAE3_RESTORE_CLIENT which is not needed now. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove some unused fields in struct hns3_nic_privHuazhong Tan
Remove some fileds which defined in struct hns3_nic_priv, but not used, and remove the related definition of struct hns3_udp_tunnel and enum hns3_udp_tnl_type. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: modify an incorrect type in struct hclgevf_cfg_gro_status_cmdHuazhong Tan
Modify field .gro_en in struct hclgevf_cfg_gro_status_cmd to u8 according to the UM, otherwise, it will overwrite the reserved byte which may be used for other purpose. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: modify an incorrect type in struct hclge_cfg_gro_status_cmdHuazhong Tan
Modify field .gro_en in struct hclge_cfg_gro_status_cmd to u8 according to the UM, otherwise, it will overwrite the reserved byte which may be used for other purpose. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: refactor hclge_query_bd_num_cmd_send()Huazhong Tan
In order to improve code maintainability and readability, rewrite the process of BDs' initialization in hclge_query_bd_num_cmd_send(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: refactor hclge_config_tso()Huazhong Tan
Since parameters 'tso_mss_min' and 'tso_mss_max' only indicate the minimum and maximum MSS, the hnae3_set_field() calls are meaningless, remove them and change the type of these two parameters to u16. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: add a missing mutex destroy in hclge_init_ad_dev()Huazhong Tan
Add a mutex destroy call in hclge_init_ae_dev() when fails. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove an unnecessary 'goto' in hclge_init_ae_dev()Huazhong Tan
Remove the redundant 'goto' and return -ENOMEM directly, when allocating memory for 'hdev' fails in hclge_init_ae_dev(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: hns3: add a print for initializing CMDQ when reset pendingHuazhong Tan
When initializing CMDQ fails because of reset pending, there is no hint for debugging, so adds a log for it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: hns3: remove unnecessary MAC enable in app loopbackYufeng Mo
Packets will not pass through MAC during app loopback. Therefore, it is meaningless to enable MAC while doing app loopback. This patch removes this unnecessary action. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: hns3: change the order of reinitializing RoCE and NIC client during resetYufeng Mo
The HNS RDMA driver will support VF device later, whose re-initialization should be done after PF's. This patch changes the order of hclge_reset_prepare_up() and hclge_notify_roce_client(), so that PF's RoCE client will be reinitialized before VF's. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>