| Age | Commit message (Collapse) | Author |
|---|
|
'connect_a610_backport/connect/rb2_a610_backport' into integration-linux-qcomlt
|
|
# Conflicts:
# arch/arm64/boot/dts/qcom/Makefile
|
|
|
|
integration-linux-qcomlt
# Conflicts:
# Documentation/devicetree/bindings/arm/qcom.yaml
# Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
# arch/arm64/boot/dts/qcom/Makefile
# arch/arm64/boot/dts/qcom/sdm630.dtsi
|
|
integration-linux-qcomlt
|
|
integration-linux-qcomlt
|
|
integration-linux-qcomlt
|
|
into integration-linux-qcomlt
|
|
integration-linux-qcomlt
|
|
into integration-linux-qcomlt
|
|
'sa8155p-adp-dts-drivers/tracking-qcomlt-sa8155p-dts-drivers' into integration-linux-qcomlt
|
|
'ov8856-remove-mode/tracking-qcomlt-ov8856-remove-mode' into integration-linux-qcomlt
|
|
integration-linux-qcomlt
|
|
integration-linux-qcomlt
# Conflicts:
# drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
|
|
integration-linux-qcomlt
# Conflicts:
# drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
|
|
integration-linux-qcomlt
|
|
integration-linux-qcomlt
|
|
integration-linux-qcomlt
|
|
integration-linux-qcomlt
|
|
'distro.config/tracking-qcomlt-config-fragments' into integration-linux-qcomlt
|
|
'arm64-defconfig/tracking-qcomlt-arm64-defconfig' into integration-linux-qcomlt
|
|
integration-linux-qcomlt
|
|
integration-linux-qcomlt
|
|
Enable the clock controllers required for a good visual experience
on SM6115.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
|
Add support for the GPU clock controller found on SM6115.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208091340.124641-11-konrad.dybcio@linaro.org
|
|
Add device tree bindings for graphics clock controller for Qualcomm
Technology Inc's SM6115 SoCs.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208091340.124641-10-konrad.dybcio@linaro.org
|
|
Prefix the "branch enable" registers with CBCR_ to be closer to what
they are actually called in Qualcomm terms, use GENMASK instead of
shifting values around and adjust their usage accordingly.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208091340.124641-5-konrad.dybcio@linaro.org
|
|
Move the definitions of CBCR bits to the branch header file.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208091340.124641-4-konrad.dybcio@linaro.org
|
|
HLOS-controlled branch clocks on non-ancient Qualcomm platforms
feature SLEEP and WAKE fields which can be written to to configure
how long the clock hardware should wait internally before being
(un)gated. Some very sensitive clocks need to have these values
programmed to prevent putting the hardware in a not-exactly-good
state. Add definitions of these fields and introduce helpers for
setting them inside clock drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208091340.124641-3-konrad.dybcio@linaro.org
|
|
Most Qualcomm branch clocks come with a pretty usual set of bits that
can enable memory retention by means of not turning off parts of the
memory logic. Add them to the common header file and introduce helper
functions for setting them instead of using magic writes.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208091340.124641-2-konrad.dybcio@linaro.org
|
|
Introduce nodes for the A610 GPU and its GMU wrapper along with the
speedbin fuse entry in QFPROM.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
|
Add GPUCC and Adreno SMMU nodes in preparation for adding the GPU
itself.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315-topic-kamorta_adrsmmu-v1-2-d1c0dea90bd9@linaro.org
|
|
Enable the A610 GPU and provide the ZAP firmware path.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
|
A610 is implemented on at least three SoCs: SM6115 (bengal), SM6125
(trinket) and SM6225 (khaje). Trinket does not support speed binning
(only a single SKU exists) and we don't yet support khaje upstream.
Hence, add a fuse mapping table for bengal to allow for per-chip
frequency limiting.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
|
A619_holi is implemented on at least two SoCs: SM4350 (holi) and SM6375
(blair). This is what seems to be a first occurrence of this happening,
but it's easy to overcome by guarding the SoC-specific fuse values with
of_machine_is_compatible(). Do just that to enable frequency limiting
on these SoCs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
|
Before transitioning to using per-SoC and not per-Adreno speedbin
fuse values (need another patchset to land elsewhere), a good
improvement/stopgap solution is to use adreno_is_aXYZ macros in
place of explicit revision matching. Do so to allow differentiating
between A619 and A619_holi.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
|
The GPU can only be one at a time. Turn a series of ifs into if +
elseifs to save some CPU cycles.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
|
Adreno 619 expects some tunables to be set differently. Make up for it.
Fixes: b7616b5c69e6 ("drm/msm/adreno: Add A619 support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
|
A610 is one of (if not the) lowest-tier SKUs in the A6XX family. It
features no GMU, as it's implemented solely on SoCs with SMD_RPM.
What's more interesting is that it does not feature a VDDGX line
either, being powered solely by VDDCX and has an unfortunate hardware
quirk that makes its reset line broken - after a couple of assert/
deassert cycles, it will hang for good and will not wake up again.
This GPU requires mesa changes for proper rendering, and lots of them
at that. The command streams are quite far away from any other A6XX
GPU and hence it needs special care. This patch was validated both
by running an (incomplete) downstream mesa with some hacks (frames
rendered correctly, though some instructions made the GPU hangcheck
which is expected - garbage in, garbage out) and by replaying RD
traces captured with the downstream KGSL driver - no crashes there,
ever.
Add support for this GPU on the kernel side, which comes down to
pretty simply adding A612 HWCG tables, altering a few values and
adding a special case for handling the reset line.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
|
A619_holi is a GMU-less variant of the already-supported A619 GPU.
It's present on at least SM4350 (holi) and SM6375 (blair). No mesa
changes are required. Add the required kernel-side support for it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
|
A610 and A619_holi don't support the feature. Disable it to make the GPU stop
crashing after almost each and every submission - the received data on
the GPU end was simply incomplete in garbled, resulting in almost nothing
being executed properly. Extend the disablement to adreno_has_gmu_wrapper,
as none of the GMU wrapper Adrenos that don't support yet seem to feature it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
|
Currently we're only deasserting REG_A6XX_RBBM_GBIF_HALT, but we also
need REG_A6XX_GBIF_HALT to be set to 0. For GMU-equipped GPUs this is
done in a6xx_bus_clear_pending_transactions(), but for the GMU-less
ones we have to do it *somewhere*. Unhalting both side by side sounds
like a good plan and it won't cause any issues if it's unnecessary.
Also, add a memory barrier to ensure it's gone through.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
|
Some (particularly SMD_RPM, a.k.a non-RPMh) SoCs implement A6XX GPUs
but don't implement the associated GMUs. This is due to the fact that
the GMU directly pokes at RPMh. Sadly, this means we have to take care
of enabling & scaling power rails, clocks and bandwidth ourselves.
Reuse existing Adreno-common code and modify the deeply-GMU-infused
A6XX code to facilitate these GPUs. This involves if-ing out lots
of GMU callbacks and introducing a new type of GMU - GMU wrapper (it's
the actual name that Qualcomm uses in their downstream kernels).
This is essentially a register region which is convenient to model
as a device. We'll use it for managing the GDSCs. The register
layout matches the actual GMU_CX/GX regions on the "real GMU" devices
and lets us reuse quite a bit of gmu_read/write/rmw calls.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
|
Rename lower_bit to hbb_lo and explain what it signifies.
Add explanations (wherever possible to other tunables).
Port setting min_access_length, ubwc_mode and hbb_hi from downstream.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
|
These two will be reused by at least A619_holi in the non-gmu
paths. Turn them non-static them to make it possible.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
|
The "GMU Wrapper" is Qualcomm's name for "let's treat the GPU blocks
we'd normally assign to the GMU as if they were a part of the GMU, even
though they are not". It's a (good) software representation of the GMU_CX
and GMU_GX register spaces within the GPUSS that helps us programatically
treat these de-facto GMU-less parts in a way that's very similar to their
GMU-equipped cousins, massively saving up on code duplication.
The "wrapper" register space was specifically designed to mimic the layout
of a real GMU, though it rather obviously does not have the M3 core et al.
To sum it all up, the GMU wrapper is essentially a register space within
the GPU, which Linux sees as a dumbed-down regular GMU: there's no clocks,
interrupts, multiple reg spaces, iommus and OPP. Document it.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
|
The "GMU Wrapper" is Qualcomm's name for "let's treat the GPU blocks
we'd normally assign to the GMU as if they were a part of the GMU, even
though they are not". It's a (good) software representation of the GMU_CX
and GMU_GX register spaces within the GPUSS that helps us programatically
treat these de-facto GMU-less parts in a way that's very similar to their
GMU-equipped cousins, massively saving up on code duplication.
The "wrapper" register space was specifically designed to mimic the layout
of a real GMU, though it rather obviously does not have the M3 core et al.
GMU wrapper-equipped A6xx GPUs require clocks and clock-names to be
specified under the GPU node, just like their older cousins. Account
for that.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
|
|
Split the a6xx_fault_handler() into the generic adreno_fault_handler()
and platform-specific parts. The adreno_fault_handler() can further be
used by a5xx and hopefully by a4xx (at some point).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522722/
Link: https://lore.kernel.org/r/20230214123504.3729522-3-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The commit e25e92e08e32 ("drm/msm: devcoredump iommu fault support")
enabled SMMU stalling to collect GPU state, but only for a6xx. It tied
enabling the stall with tha per-instance pagetables creation.
Since that commit SoCs with a5xx also gained support for
adreno-smmu-priv. Move stalling into generic code and add corresponding
resume_translation calls.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522720/
Link: https://lore.kernel.org/r/20230214123504.3729522-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Add a NULL check before calling prepare_commit() in
msm_atomic_commit_tail()
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/523604/
Link: https://lore.kernel.org/r/20230221184256.1436-3-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
