diff options
Diffstat (limited to 'arch/arm64/boot/dts')
-rw-r--r-- | arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 11 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/sdm845.dtsi | 103 |
2 files changed, 105 insertions, 9 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 13f80a0b6faa..85a5ea2f1102 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -491,6 +491,17 @@ status = "okay"; }; +&mdss_mdp { + status = "okay"; +}; + +&msm_dp { + status = "okay"; + data-lanes = <0 1>; + vdda-1p2-supply = <&vreg_l26a_1p2>; + vdda-0p9-supply = <&vreg_l1a_0p875>; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 526087586ba4..3b68ab7baf47 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3709,9 +3709,10 @@ }; usb_1_qmpphy: phy@88e9000 { - compatible = "qcom,sdm845-qmp-usb3-phy"; + compatible = "qcom,sdm845-qmp-usb3-dp-phy"; reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x10>; + <0 0x088e8000 0 0x38>, + <0 0x088ea000 0 0x40>; status = "disabled"; #address-cells = <2>; #size-cells = <2>; @@ -3723,11 +3724,11 @@ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; clock-names = "aux", "cfg_ahb", "ref", "com_aux"; - resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, - <&gcc GCC_USB3_PHY_PRIM_BCR>; + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: phy@88e9200 { + usb_1_ssphy: usb3-phy@88e9200 { reg = <0 0x088e9200 0 0x128>, <0 0x088e9400 0 0x200>, <0 0x088e9c00 0 0x218>, @@ -3740,6 +3741,16 @@ clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; }; + + dp_phy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eaa00 0 0x200>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; }; usb_2_qmpphy: phy@88eb000 { @@ -4230,13 +4241,20 @@ port@0 { reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; }; }; port@1 { reg = <1>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@2 { + reg = <2>; dpu_intf2_out: endpoint { remote-endpoint = <&dsi1_in>; }; @@ -4268,6 +4286,73 @@ }; }; + msm_dp: displayport-controller@ae90000 { + status = "disabled"; + compatible = "qcom,sc7180-dp"; + + reg = <0 0x0ae90000 0 0x1400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", "core_aux", "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + #clock-cells = <1>; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + phys = <&dp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { }; + }; + }; + + dp_opp_table: dp-opp-table { + compatible = "operating-points-v2"; + + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + dsi0: dsi@ae94000 { compatible = "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -4560,8 +4645,8 @@ <&dsi0_phy 1>, <&dsi1_phy 0>, <&dsi1_phy 1>, - <0>, - <0>; + <&dp_phy 0>, + <&dp_phy 1>; clock-names = "bi_tcxo", "gcc_disp_gpll0_clk_src", "gcc_disp_gpll0_div_clk_src", |