/*
 * Copyright (C) 2016 NXP Semiconductors
 *
 * Configuration settings for the i.MX7S Warp board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __WARP7_CONFIG_H
#define __WARP7_CONFIG_H

#include "mx7_common.h"

#define PHYS_SDRAM_SIZE			SZ_512M

#define CONFIG_MXC_UART_BASE		UART1_IPS_BASE_ADDR

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(35 * SZ_1M)

/* MMC Config*/
#define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC3_BASE_ADDR
#define CONFIG_SUPPORT_EMMC_BOOT
#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
#define CONFIG_SYS_MMC_IMG_LOAD_PART	1

#define CONFIG_SYS_FDT_ADDR		0x83000000

#define CONFIG_DFU_ENV_SETTINGS \
	"dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \

#if defined(CONFIG_LOADCMD_EXT4)
#define LOADCMD "ext4load"

/* boot.scr, kernel and DTB live here */
#define BOOTPATH "/boot/"

/* uTee.optee lives here */
#define LIBPATH "/lib/firmware/"

/* Default partition */
#define UUID "0:1"

#else
#define LOADCMD "fatload"

/* No path prefix when loading from FAT */
#define BOOTPATH ""

/* No path prefix when loading from FAT */
#define LIBPATH ""

/* Default partition */
#define UUID "0:2"
#endif

#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_DFU_ENV_SETTINGS \
	"script=boot.scr\0" \
	"script_signed=boot.scr.imx-signed\0" \
	"image=" BOOTPATH "zImage\0" \
	"image_signed=" BOOTPATH "zImage.imx-signed\0" \
	"console=ttymxc0\0" \
	"ethact=usb_ether\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=" BOOTPATH "imx7s-warp.dtb\0" \
	"fdt_file_signed=" BOOTPATH "imx7s-warp.dtb.imx-signed\0" \
	"fdt_addr=" __stringify(CONFIG_SYS_FDT_ADDR)"\0" \
	"optee_file=" LIBPATH "uTee.optee\0" \
	"optee_file_signed=" LIBPATH "uTee.optee.imx-signed\0" \
	"optee_addr=" __stringify(CONFIG_OPTEE_LOAD_ADDR)"\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	"uuidpart=" UUID "\0"\
	"finduuid=part uuid mmc ${uuidpart} uuid\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=PARTUUID=${uuid} rootwait rw\0" \
	"loadcmd=" LOADCMD "\0" \
	"loadbootscript_hab=" \
		"if test ${hab_enabled} -eq 1; then " \
			"warp7_get_ivt_addr ${loadaddr}; " \
			"setenv script ${script_signed}; " \
		"else "\
			"setenv hab_load_address ${loadaddr}; "\
		"fi;" \
		"setenv filesize 0; "\
		"${loadcmd} mmc ${mmcdev}:${mmcpart} ${hab_load_address} ${script};" \
		"if test ${hab_enabled} -eq 1; then " \
			"hab_auth_img ${hab_load_address} ${filesize} 0; "\
			"if test $? -ne 0; then " \
				"run warp7_failsafe;" \
			"fi; " \
		"fi;\0" \
	"loadbootscript=" \
		"${loadcmd} mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage_hab_pre="\
			"if test ${hab_enabled} -eq 1; then " \
				"warp7_get_ivt_addr ${loadaddr}; " \
				"setenv image ${image_signed}; " \
			"else "\
				"setenv hab_load_address ${loadaddr}; "\
			"fi;\0" \
	"loadimage_hab_post="\
			"if test ${hab_enabled} -eq 1; then " \
				"hab_auth_img ${hab_load_address} ${filesize} 0; "\
				"if test $? -ne 0; then " \
					"run warp7_failsafe;" \
				"fi; " \
			"fi;\0" \
	"loadimage=run loadimage_hab_pre; " \
			"${loadcmd} mmc ${mmcdev}:${mmcpart} ${hab_load_address} ${image}; " \
		  "run loadimage_hab_post; \0" \
	"loadfdt_hab_pre="\
			"if test ${hab_enabled} -eq 1; then " \
				"warp7_get_ivt_addr ${fdt_addr}; " \
				"setenv fdt_file ${fdt_file_signed}; " \
			"else "\
				"setenv hab_load_address ${fdt_addr}; "\
			"fi;\0" \
	"loadfdt_hab_post="\
			"if test ${hab_enabled} -eq 1; then " \
				"hab_auth_img ${hab_load_address} ${filesize} 0; "\
				"if test $? -ne 0; then " \
					"run warp7_failsafe;" \
				"fi; " \
			"fi;\0" \
	"loadfdt=run loadfdt_hab_pre; " \
		 "${loadcmd} mmc ${mmcdev}:${mmcpart} ${hab_load_address} ${fdt_file}; " \
		 "run loadfdt_hab_post;\0" \
	"loadoptee_hab_pre="\
			"if test ${hab_enabled} -eq 1; then " \
				"warp7_get_ivt_addr ${optee_addr}; " \
				"setenv optee_file ${optee_file_signed}; " \
			"else "\
				"setenv hab_load_address ${optee_addr}; "\
			"fi;\0" \
	"loadoptee_hab_post="\
			"if test ${hab_enabled} -eq 1; then " \
				"hab_auth_img ${hab_load_address} ${filesize} 0; "\
				"if test $? -ne 0; then " \
					"run warp7_failsafe;" \
				"fi; " \
			"fi;\0" \
	"loadoptee=run loadoptee_hab_pre; "\
		   "${loadcmd} mmc ${mmcdev}:${mmcpart} ${hab_load_address} ${optee_file}; " \
		   "run loadoptee_hab_post;\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run finduuid; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"mmcbootsec=echo Booting secure OPTEE OS from mmc ...; " \
		"run finduuid; " \
		"run mmcargs; " \
		"run loadfdt; " \
		"run loadoptee; "\
		"bootm ${optee_addr} - ${fdt_addr};\0"\
		"warp7_failsafe=echo 'HAB verification fail'; hab_failsafe;\0"
#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev};" \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "run loadimage;" \
			   "run mmcboot; " \
		   "fi; " \
	   "fi"

/* Set OPTEE specific boot parameters */
#if defined(CONFIG_OPTEE)

#undef CONFIG_BOOTCOMMAND
#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev};" \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		"run loadbootscript_hab;" \
		"if test ${filesize} -ne 0; then "\
			"run bootscript; " \
		"fi; "\
		"run loadimage;" \
		"run mmcbootsec; " \
	   "fi"

#endif /* CONFIG_OPTEE */

#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_SYS_HZ			1000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* I2C configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1
#define CONFIG_SYS_I2C_SPEED		100000

/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE3000
#define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08

/* environment organization */
#define CONFIG_ENV_SIZE			SZ_8K

#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
#define CONFIG_SYS_FSL_USDHC_NUM	1

#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_SYS_MMC_ENV_PART		0

/* USB Configs */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET

#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS		0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG1 port enabled */

#define CONFIG_IMX_THERMAL

#define CONFIG_USBD_HS

#define CONFIG_USB_FUNCTION_MASS_STORAGE

/* USB Device Firmware Update support */
#define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_16M
#define DFU_DEFAULT_POLL_TIMEOUT	300

#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_HOST_ADDR		"de:ad:be:af:00:00"
#define CONFIG_USBNET_DEV_ADDR		"de:ad:be:af:00:01"

/* Define an OPTEE base address */
#define OPTEE_TZDRAM_BASE	(CONFIG_SYS_SDRAM_BASE + SZ_512M -\
				 CONFIG_OPTEE_TZDRAM_SIZE)

/* Environment variable name to represent HAB enable state */
#define HAB_ENABLED_ENVNAME		"hab_enabled"

#endif