Merge branch 'master' of git://git.denx.de/u-boot-sunxi

20 files changed, 979 insertions, 124 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 054ccac12b..b2d6e80716 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -649,6 +649,14 @@ config ARCH_SUNXI
 	select USB_STORAGE if DISTRO_DEFAULTS
 	select USB_KEYBOARD if DISTRO_DEFAULTS
 	select USE_TINY_PRINTF
+	imply PRE_CONSOLE_BUFFER
+	imply SPL_GPIO_SUPPORT
+	imply SPL_LIBCOMMON_SUPPORT
+	imply SPL_LIBDISK_SUPPORT
+	imply SPL_LIBGENERIC_SUPPORT
+	imply SPL_MMC_SUPPORT if GENERIC_MMC
+	imply SPL_POWER_SUPPORT
+	imply SPL_SERIAL_SUPPORT
 
 config TARGET_TS4600
 	bool "Support TS4600"
@@ -1049,6 +1057,8 @@ source "arch/arm/mach-sti/Kconfig"
 
 source "arch/arm/mach-stm32/Kconfig"
 
+source "arch/arm/mach-sunxi/Kconfig"
+
 source "arch/arm/mach-tegra/Kconfig"
 
 source "arch/arm/mach-uniphier/Kconfig"
@@ -1121,7 +1131,6 @@ source "board/spear/spear320/Kconfig"
 source "board/spear/spear600/Kconfig"
 source "board/spear/x600/Kconfig"
 source "board/st/stv0991/Kconfig"
-source "board/sunxi/Kconfig"
 source "board/syteco/zmx25/Kconfig"
 source "board/tcl/sl50/Kconfig"
 source "board/birdland/bav335x/Kconfig"
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
index a44ea77576..faa14791f9 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -25,7 +25,7 @@ struct sunxi_ccm_reg {
 	u32 pll6_cfg;		/* 0x28 pll6 control */
 	u32 reserved5;
 	u32 pll7_cfg;		/* 0x30 pll7 control */
-	u32 reserved6;
+	u32 sata_pll_cfg;	/* 0x34 SATA pll control (R40 only) */
 	u32 pll8_cfg;		/* 0x38 pll8 control */
 	u32 reserved7;
 	u32 mipi_pll_cfg;	/* 0x40 MIPI pll control */
@@ -58,7 +58,8 @@ struct sunxi_ccm_reg {
 	u32 i2s1_clk_cfg;	/* 0xb4 I2S1 clock control */
 	u32 reserved10[2];
 	u32 spdif_clk_cfg;	/* 0xc0 SPDIF clock control */
-	u32 reserved11[2];
+	u32 reserved11;
+	u32 sata_clk_cfg;	/* 0xc8 SATA clock control (R40 only) */
 	u32 usb_clk_cfg;	/* 0xcc USB clock control */
 	u32 gmac_clk_cfg;	/* 0xd0 GMAC clock control */
 	u32 reserved12[7];
@@ -224,6 +225,8 @@ struct sunxi_ccm_reg {
 #define CCM_PLL6_CTRL_K_MASK		(0x3 << CCM_PLL6_CTRL_K_SHIFT)
 #define CCM_PLL6_CTRL_LOCK		(1 << 28)
 
+#define CCM_SATA_PLL_DEFAULT		0x90005811 /* 100 MHz */
+
 #define CCM_MIPI_PLL_CTRL_M_SHIFT	0
 #define CCM_MIPI_PLL_CTRL_M_MASK	(0xf << CCM_MIPI_PLL_CTRL_M_SHIFT)
 #define CCM_MIPI_PLL_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
@@ -280,7 +283,12 @@ struct sunxi_ccm_reg {
 #define AHB_GATE_OFFSET_USB_EHCI1	27
 #define AHB_GATE_OFFSET_USB_EHCI0	26
 #endif
+#ifndef CONFIG_MACH_SUN8I_R40
 #define AHB_GATE_OFFSET_USB0		24
+#else
+#define AHB_GATE_OFFSET_USB0		25
+#define AHB_GATE_OFFSET_SATA		24
+#endif
 #define AHB_GATE_OFFSET_MCTL		14
 #define AHB_GATE_OFFSET_GMAC		17
 #define AHB_GATE_OFFSET_NAND0		13
@@ -315,6 +323,9 @@ struct sunxi_ccm_reg {
 #define CCM_MMC_CTRL_PLL6		(0x1 << 24)
 #define CCM_MMC_CTRL_ENABLE		(0x1 << 31)
 
+#define CCM_SATA_CTRL_ENABLE		(0x1 << 31)
+#define CCM_SATA_CTRL_USE_EXTCLK	(0x1 << 24)
+
 #define CCM_USB_CTRL_PHY0_RST (0x1 << 0)
 #define CCM_USB_CTRL_PHY1_RST (0x1 << 1)
 #define CCM_USB_CTRL_PHY2_RST (0x1 << 2)
@@ -417,6 +428,9 @@ struct sunxi_ccm_reg {
 #define CCM_PLL11_PATTERN		0xf5860000
 
 /* ahb_reset0 offsets */
+#ifdef CONFIG_MACH_SUN8I_R40
+#define AHB_RESET_OFFSET_SATA		24
+#endif
 #define AHB_RESET_OFFSET_GMAC		17
 #define AHB_RESET_OFFSET_MCTL		14
 #define AHB_RESET_OFFSET_MMC3		11
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
index 88c3f13817..6aa5e91ada 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
@@ -18,6 +18,8 @@
 #define SUNXI_SRAM_D_BASE		0x00010000	/* 4 kiB */
 #define SUNXI_SRAM_B_BASE		0x00020000	/* 64 kiB (secure) */
 
+#define SUNXI_DE2_BASE			0x01000000
+
 #ifdef CONFIG_MACH_SUN8I_A83T
 #define SUNXI_CPUCFG_BASE		0x01700000
 #endif
@@ -46,7 +48,9 @@
 #define SUNXI_USB1_BASE			0x01c14000
 #endif
 #define SUNXI_SS_BASE			0x01c15000
+#if !defined(CONFIG_MACH_SUNXI_H3_H5) && !defined(CONFIG_MACH_SUN50I)
 #define SUNXI_HDMI_BASE			0x01c16000
+#endif
 #define SUNXI_SPI2_BASE			0x01c17000
 #define SUNXI_SATA_BASE			0x01c18000
 #ifdef CONFIG_SUNXI_GEN_SUN4I
@@ -164,6 +168,10 @@ defined(CONFIG_MACH_SUN50I)
 #define SUNXI_MP_BASE			0x01e80000
 #define SUNXI_AVG_BASE			0x01ea0000
 
+#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
+#define SUNXI_HDMI_BASE			0x01ee0000
+#endif
+
 #define SUNXI_RTC_BASE			0x01f00000
 #define SUNXI_PRCM_BASE			0x01f01400
 
diff --git a/arch/arm/include/asm/arch-sunxi/display2.h b/arch/arm/include/asm/arch-sunxi/display2.h
new file mode 100644
index 0000000000..b5875f9605
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/display2.h
@@ -0,0 +1,124 @@
+/*
+ * Sunxi platform display controller register and constant defines
+ *
+ * (C) Copyright 2017 Jernej Skrabec <jernej.skrabec@siol.net>
+ *
+ * Based on out of tree Linux DRM driver defines:
+ * Copyright (C) 2016 Jean-Francois Moine <moinejf@free.fr>
+ * Copyright (c) 2016 Allwinnertech Co., Ltd.
+*
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SUNXI_DISPLAY2_H
+#define _SUNXI_DISPLAY2_H
+
+/* internal clock settings */
+struct de_clk {
+	u32 gate_cfg;
+	u32 bus_cfg;
+	u32 rst_cfg;
+	u32 div_cfg;
+	u32 sel_cfg;
+};
+
+/* global control */
+struct de_glb {
+	u32 ctl;
+	u32 status;
+	u32 dbuff;
+	u32 size;
+};
+
+/* alpha blending */
+struct de_bld {
+	u32 fcolor_ctl;
+	struct {
+		u32 fcolor;
+		u32 insize;
+		u32 offset;
+		u32 dum;
+	} attr[4];
+	u32 dum0[15];
+	u32 route;
+	u32 premultiply;
+	u32 bkcolor;
+	u32 output_size;
+	u32 bld_mode[4];
+	u32 dum1[4];
+	u32 ck_ctl;
+	u32 ck_cfg;
+	u32 dum2[2];
+	u32 ck_max[4];
+	u32 dum3[4];
+	u32 ck_min[4];
+	u32 dum4[3];
+	u32 out_ctl;
+};
+
+/* VI channel */
+struct de_vi {
+	struct {
+		u32 attr;
+		u32 size;
+		u32 coord;
+		u32 pitch[3];
+		u32 top_laddr[3];
+		u32 bot_laddr[3];
+	} cfg[4];
+	u32 fcolor[4];
+	u32 top_haddr[3];
+	u32 bot_haddr[3];
+	u32 ovl_size[2];
+	u32 hori[2];
+	u32 vert[2];
+};
+
+struct de_ui {
+	struct {
+		u32 attr;
+		u32 size;
+		u32 coord;
+		u32 pitch;
+		u32 top_laddr;
+		u32 bot_laddr;
+		u32 fcolor;
+		u32 dum;
+	} cfg[4];
+	u32 top_haddr;
+	u32 bot_haddr;
+	u32 ovl_size;
+};
+
+/*
+ * DE register constants.
+ */
+#define SUNXI_DE2_MUX0_BASE			(SUNXI_DE2_BASE + 0x100000)
+#define SUNXI_DE2_MUX1_BASE			(SUNXI_DE2_BASE + 0x200000)
+
+#define SUNXI_DE2_MUX_GLB_REGS			0x00000
+#define SUNXI_DE2_MUX_BLD_REGS			0x01000
+#define SUNXI_DE2_MUX_CHAN_REGS			0x02000
+#define SUNXI_DE2_MUX_CHAN_SZ			0x1000
+#define SUNXI_DE2_MUX_VSU_REGS			0x20000
+#define SUNXI_DE2_MUX_GSU1_REGS			0x30000
+#define SUNXI_DE2_MUX_GSU2_REGS			0x40000
+#define SUNXI_DE2_MUX_GSU3_REGS			0x50000
+#define SUNXI_DE2_MUX_FCE_REGS			0xa0000
+#define SUNXI_DE2_MUX_BWS_REGS			0xa2000
+#define SUNXI_DE2_MUX_LTI_REGS			0xa4000
+#define SUNXI_DE2_MUX_PEAK_REGS			0xa6000
+#define SUNXI_DE2_MUX_ASE_REGS			0xa8000
+#define SUNXI_DE2_MUX_FCC_REGS			0xaa000
+#define SUNXI_DE2_MUX_DCSC_REGS			0xb0000
+
+#define SUNXI_DE2_FORMAT_XRGB_8888		4
+#define SUNXI_DE2_FORMAT_RGB_565		10
+
+#define SUNXI_DE2_MUX_GLB_CTL_EN		(1 << 0)
+#define SUNXI_DE2_UI_CFG_ATTR_EN		(1 << 0)
+#define SUNXI_DE2_UI_CFG_ATTR_FMT(f)		((f & 0xf) << 8)
+
+#define SUNXI_DE2_WH(w, h)			(((h - 1) << 16) | (w - 1))
+
+#endif /* _SUNXI_DISPLAY2_H */
diff --git a/board/sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index b47034f417..8d9900e00b 100644
--- a/board/sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -3,32 +3,6 @@ if ARCH_SUNXI
 config IDENT_STRING
 	default " Allwinner Technology"
 
-# FIXME: Should not redefine these Kconfig symbols
-config PRE_CONSOLE_BUFFER
-	default y
-
-config SPL_GPIO_SUPPORT
-	default y
-
-config SPL_LIBCOMMON_SUPPORT
-	default y
-
-config SPL_LIBDISK_SUPPORT
-	default y
-
-config SPL_LIBGENERIC_SUPPORT
-	default y
-
-config SPL_MMC_SUPPORT
-	depends on SPL && GENERIC_MMC
-	default y
-
-config SPL_POWER_SUPPORT
-	default y
-
-config SPL_SERIAL_SUPPORT
-	default y
-
 config SUNXI_HIGH_SRAM
 	bool
 	default n
@@ -58,6 +32,7 @@ config SUNXI_GEN_SUN6I
 
 config MACH_SUNXI_H3_H5
 	bool
+	select DM_I2C
 	select SUNXI_DE2
 	select SUNXI_GEN_SUN6I
 	select SUPPORT_SPL
@@ -163,6 +138,7 @@ config MACH_SUN9I
 config MACH_SUN50I
 	bool "sun50i (Allwinner A64)"
 	select ARM64
+	select DM_I2C
 	select SUNXI_DE2
 	select SUNXI_GEN_SUN6I
 	select SUNXI_HIGH_SRAM
@@ -706,6 +682,16 @@ config SUNXI_DE2
 	bool
 	default n
 
+config VIDEO_DE2
+	bool "Display Engine 2 video driver"
+	depends on SUNXI_DE2
+	select DM_VIDEO
+	select DISPLAY
+	default y
+	---help---
+	Say y here if you want to build DE2 video driver which is present on
+	newer SoCs. Currently only HDMI output is supported.
+
 
 choice
 	prompt "LCD panel support"
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 4507279cc5..65b1ebd837 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -204,7 +204,9 @@ void s_init(void)
 	clock_init();
 	timer_init();
 	gpio_init();
+#ifndef CONFIG_DM_I2C
 	i2c_init_board();
+#endif
 	eth_init_board();
 }
 
diff --git a/arch/arm/mach-sunxi/clock_sun6i.c b/arch/arm/mach-sunxi/clock_sun6i.c
index 631bc6e250..ec5b026ef5 100644
--- a/arch/arm/mach-sunxi/clock_sun6i.c
+++ b/arch/arm/mach-sunxi/clock_sun6i.c
@@ -51,6 +51,13 @@ void clock_init_safe(void)
 	writel(MBUS_CLK_DEFAULT, &ccm->mbus0_clk_cfg);
 	if (IS_ENABLED(CONFIG_MACH_SUN6I))
 		writel(MBUS_CLK_DEFAULT, &ccm->mbus1_clk_cfg);
+
+#if defined(CONFIG_MACH_SUN8I_R40) && defined(CONFIG_SUNXI_AHCI)
+	setbits_le32(&ccm->sata_pll_cfg, CCM_SATA_PLL_DEFAULT);
+	setbits_le32(&ccm->ahb_reset0_cfg, 0x1 << AHB_GATE_OFFSET_SATA);
+	setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_SATA);
+	setbits_le32(&ccm->sata_clk_cfg, CCM_SATA_CTRL_ENABLE);
+#endif
 }
 #endif
 
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index f39402b89c..1c8817375d 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -280,6 +280,11 @@ S:	Maintained
 F:	configs/Sinlinx_SinA33_defconfig
 W:	http://linux-sunxi.org/Sinlinx_SinA33
 
+SINOVOIP BPI M2 PLUS H3 BOARD
+M:	Icenowy Zheng <icenowy@aosc.io>
+S:	Maintained
+F:	configs/Sinovoip_BPI_M2_Plus_defconfig
+
 SINOVOIP BPI M3 A83T BOARD
 M:	VishnuPatekar <vishnupatekar0510@gmail.com>
 S:	Maintained
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 04a629125e..01de42d031 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -77,6 +77,100 @@ static int soft_i2c_board_init(void) { return 0; }
 
 DECLARE_GLOBAL_DATA_PTR;
 
+void i2c_init_board(void)
+{
+#ifdef CONFIG_I2C0_ENABLE
+#if defined(CONFIG_MACH_SUN4I) || \
+    defined(CONFIG_MACH_SUN5I) || \
+    defined(CONFIG_MACH_SUN7I) || \
+    defined(CONFIG_MACH_SUN8I_R40)
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN4I_GPB_TWI0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN4I_GPB_TWI0);
+	clock_twi_onoff(0, 1);
+#elif defined(CONFIG_MACH_SUN6I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(14), SUN6I_GPH_TWI0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(15), SUN6I_GPH_TWI0);
+	clock_twi_onoff(0, 1);
+#elif defined(CONFIG_MACH_SUN8I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(2), SUN8I_GPH_TWI0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(3), SUN8I_GPH_TWI0);
+	clock_twi_onoff(0, 1);
+#endif
+#endif
+
+#ifdef CONFIG_I2C1_ENABLE
+#if defined(CONFIG_MACH_SUN4I) || \
+    defined(CONFIG_MACH_SUN7I) || \
+    defined(CONFIG_MACH_SUN8I_R40)
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN4I_GPB_TWI1);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN4I_GPB_TWI1);
+	clock_twi_onoff(1, 1);
+#elif defined(CONFIG_MACH_SUN5I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(15), SUN5I_GPB_TWI1);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(16), SUN5I_GPB_TWI1);
+	clock_twi_onoff(1, 1);
+#elif defined(CONFIG_MACH_SUN6I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(16), SUN6I_GPH_TWI1);
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(17), SUN6I_GPH_TWI1);
+	clock_twi_onoff(1, 1);
+#elif defined(CONFIG_MACH_SUN8I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(4), SUN8I_GPH_TWI1);
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(5), SUN8I_GPH_TWI1);
+	clock_twi_onoff(1, 1);
+#endif
+#endif
+
+#ifdef CONFIG_I2C2_ENABLE
+#if defined(CONFIG_MACH_SUN4I) || \
+    defined(CONFIG_MACH_SUN7I) || \
+    defined(CONFIG_MACH_SUN8I_R40)
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN4I_GPB_TWI2);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(21), SUN4I_GPB_TWI2);
+	clock_twi_onoff(2, 1);
+#elif defined(CONFIG_MACH_SUN5I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(17), SUN5I_GPB_TWI2);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN5I_GPB_TWI2);
+	clock_twi_onoff(2, 1);
+#elif defined(CONFIG_MACH_SUN6I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(18), SUN6I_GPH_TWI2);
+	sunxi_gpio_set_cfgpin(SUNXI_GPH(19), SUN6I_GPH_TWI2);
+	clock_twi_onoff(2, 1);
+#elif defined(CONFIG_MACH_SUN8I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPE(12), SUN8I_GPE_TWI2);
+	sunxi_gpio_set_cfgpin(SUNXI_GPE(13), SUN8I_GPE_TWI2);
+	clock_twi_onoff(2, 1);
+#endif
+#endif
+
+#ifdef CONFIG_I2C3_ENABLE
+#if defined(CONFIG_MACH_SUN6I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPG(10), SUN6I_GPG_TWI3);
+	sunxi_gpio_set_cfgpin(SUNXI_GPG(11), SUN6I_GPG_TWI3);
+	clock_twi_onoff(3, 1);
+#elif defined(CONFIG_MACH_SUN7I) || \
+      defined(CONFIG_MACH_SUN8I_R40)
+	sunxi_gpio_set_cfgpin(SUNXI_GPI(0), SUN7I_GPI_TWI3);
+	sunxi_gpio_set_cfgpin(SUNXI_GPI(1), SUN7I_GPI_TWI3);
+	clock_twi_onoff(3, 1);
+#endif
+#endif
+
+#ifdef CONFIG_I2C4_ENABLE
+#if defined(CONFIG_MACH_SUN7I) || \
+    defined(CONFIG_MACH_SUN8I_R40)
+	sunxi_gpio_set_cfgpin(SUNXI_GPI(2), SUN7I_GPI_TWI4);
+	sunxi_gpio_set_cfgpin(SUNXI_GPI(3), SUN7I_GPI_TWI4);
+	clock_twi_onoff(4, 1);
+#endif
+#endif
+
+#ifdef CONFIG_R_I2C_ENABLE
+	clock_twi_onoff(5, 1);
+	sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_H3_GPL_R_TWI);
+	sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_H3_GPL_R_TWI);
+#endif
+}
+
 /* add board specific code here */
 int board_init(void)
 {
@@ -128,6 +222,14 @@ int board_init(void)
 	gpio_direction_output(macpwr_pin, 1);
 #endif
 
+#ifdef CONFIG_DM_I2C
+	/*
+	 * Temporary workaround for enabling I2C clocks until proper sunxi DM
+	 * clk, reset and pinctrl drivers land.
+	 */
+	i2c_init_board();
+#endif
+
 	/* Uses dm gpio code so do this here and not in i2c_init_board() */
 	return soft_i2c_board_init();
 }
@@ -406,100 +508,6 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
-void i2c_init_board(void)
-{
-#ifdef CONFIG_I2C0_ENABLE
-#if defined(CONFIG_MACH_SUN4I) || \
-    defined(CONFIG_MACH_SUN5I) || \
-    defined(CONFIG_MACH_SUN7I) || \
-    defined(CONFIG_MACH_SUN8I_R40)
-	sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN4I_GPB_TWI0);
-	sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN4I_GPB_TWI0);
-	clock_twi_onoff(0, 1);
-#elif defined(CONFIG_MACH_SUN6I)
-	sunxi_gpio_set_cfgpin(SUNXI_GPH(14), SUN6I_GPH_TWI0);
-	sunxi_gpio_set_cfgpin(SUNXI_GPH(15), SUN6I_GPH_TWI0);
-	clock_twi_onoff(0, 1);
-#elif defined(CONFIG_MACH_SUN8I)
-	sunxi_gpio_set_cfgpin(SUNXI_GPH(2), SUN8I_GPH_TWI0);
-	sunxi_gpio_set_cfgpin(SUNXI_GPH(3), SUN8I_GPH_TWI0);
-	clock_twi_onoff(0, 1);
-#endif
-#endif
-
-#ifdef CONFIG_I2C1_ENABLE
-#if defined(CONFIG_MACH_SUN4I) || \
-    defined(CONFIG_MACH_SUN7I) || \
-    defined(CONFIG_MACH_SUN8I_R40)
-	sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN4I_GPB_TWI1);
-	sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN4I_GPB_TWI1);
-	clock_twi_onoff(1, 1);
-#elif defined(CONFIG_MACH_SUN5I)
-	sunxi_gpio_set_cfgpin(SUNXI_GPB(15), SUN5I_GPB_TWI1);
-	sunxi_gpio_set_cfgpin(SUNXI_GPB(16), SUN5I_GPB_TWI1);
-	clock_twi_onoff(1, 1);
-#elif defined(CONFIG_MACH_SUN6I)
-	sunxi_gpio_set_cfgpin(SUNXI_GPH(16), SUN6I_GPH_TWI1);
-	sunxi_gpio_set_cfgpin(SUNXI_GPH(17), SUN6I_GPH_TWI1);
-	clock_twi_onoff(1, 1);
-#elif defined(CONFIG_MACH_SUN8I)
-	sunxi_gpio_set_cfgpin(SUNXI_GPH(4), SUN8I_GPH_TWI1);
-	sunxi_gpio_set_cfgpin(SUNXI_GPH(5), SUN8I_GPH_TWI1);
-	clock_twi_onoff(1, 1);
-#endif
-#endif
-
-#ifdef CONFIG_I2C2_ENABLE
-#if defined(CONFIG_MACH_SUN4I) || \
-    defined(CONFIG_MACH_SUN7I) || \
-    defined(CONFIG_MACH_SUN8I_R40)
-	sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN4I_GPB_TWI2);
-	sunxi_gpio_set_cfgpin(SUNXI_GPB(21), SUN4I_GPB_TWI2);
-	clock_twi_onoff(2, 1);
-#elif defined(CONFIG_MACH_SUN5I)
-	sunxi_gpio_set_cfgpin(SUNXI_GPB(17), SUN5I_GPB_TWI2);
-	sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN5I_GPB_TWI2);
-	clock_twi_onoff(2, 1);
-#elif defined(CONFIG_MACH_SUN6I)
-	sunxi_gpio_set_cfgpin(SUNXI_GPH(18), SUN6I_GPH_TWI2);
-	sunxi_gpio_set_cfgpin(SUNXI_GPH(19), SUN6I_GPH_TWI2);
-	clock_twi_onoff(2, 1);
-#elif defined(CONFIG_MACH_SUN8I)
-	sunxi_gpio_set_cfgpin(SUNXI_GPE(12), SUN8I_GPE_TWI2);
-	sunxi_gpio_set_cfgpin(SUNXI_GPE(13), SUN8I_GPE_TWI2);
-	clock_twi_onoff(2, 1);
-#endif
-#endif
-
-#ifdef CONFIG_I2C3_ENABLE
-#if defined(CONFIG_MACH_SUN6I)
-	sunxi_gpio_set_cfgpin(SUNXI_GPG(10), SUN6I_GPG_TWI3);
-	sunxi_gpio_set_cfgpin(SUNXI_GPG(11), SUN6I_GPG_TWI3);
-	clock_twi_onoff(3, 1);
-#elif defined(CONFIG_MACH_SUN7I) || \
-      defined(CONFIG_MACH_SUN8I_R40)
-	sunxi_gpio_set_cfgpin(SUNXI_GPI(0), SUN7I_GPI_TWI3);
-	sunxi_gpio_set_cfgpin(SUNXI_GPI(1), SUN7I_GPI_TWI3);
-	clock_twi_onoff(3, 1);
-#endif
-#endif
-
-#ifdef CONFIG_I2C4_ENABLE
-#if defined(CONFIG_MACH_SUN7I) || \
-    defined(CONFIG_MACH_SUN8I_R40)
-	sunxi_gpio_set_cfgpin(SUNXI_GPI(2), SUN7I_GPI_TWI4);
-	sunxi_gpio_set_cfgpin(SUNXI_GPI(3), SUN7I_GPI_TWI4);
-	clock_twi_onoff(4, 1);
-#endif
-#endif
-
-#ifdef CONFIG_R_I2C_ENABLE
-	clock_twi_onoff(5, 1);
-	sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_H3_GPL_R_TWI);
-	sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_H3_GPL_R_TWI);
-#endif
-}
-
 #ifdef CONFIG_SPL_BUILD
 void sunxi_board_init(void)
 {
diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig
index c6da7274e1..4332eca68f 100644
--- a/configs/Bananapi_M2_Ultra_defconfig
+++ b/configs/Bananapi_M2_Ultra_defconfig
@@ -7,9 +7,12 @@ CONFIG_DRAM_ODT_EN=y
 CONFIG_MMC0_CD_PIN="PH13"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-r40-bananapi-m2-ultra"
+CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
+CONFIG_AXP_DLDO4_VOLT=2500
+CONFIG_AXP_ELDO3_VOLT=1200
diff --git a/configs/Sinovoip_BPI_M2_Plus_defconfig b/configs/Sinovoip_BPI_M2_Plus_defconfig
new file mode 100644
index 0000000000..e8cd4fb9ec
--- /dev/null
+++ b/configs/Sinovoip_BPI_M2_Plus_defconfig
@@ -0,0 +1,20 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_H3=y
+CONFIG_DRAM_CLK=672
+CONFIG_DRAM_ZQ=3881979
+CONFIG_DRAM_ODT_EN=y
+CONFIG_MACPWR="PD6"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-bananapi-m2-plus"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_CONSOLE_MUX=y
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SUN8I_EMAC=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
index 9598bd5cd5..5400d37bd1 100644
--- a/configs/nanopi_neo_air_defconfig
+++ b/configs/nanopi_neo_air_defconfig
@@ -15,3 +15,4 @@ CONFIG_SPL=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_USB_EHCI_HCD=y
+# CONFIG_VIDEO_DE2 is not set
diff --git a/configs/nanopi_neo_defconfig b/configs/nanopi_neo_defconfig
index 89f5687884..5afd5d565a 100644
--- a/configs/nanopi_neo_defconfig
+++ b/configs/nanopi_neo_defconfig
@@ -16,3 +16,4 @@ CONFIG_SPL=y
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
+# CONFIG_VIDEO_DE2 is not set
diff --git a/configs/orangepi_zero_defconfig b/configs/orangepi_zero_defconfig
index ac44937b16..97ef08994a 100644
--- a/configs/orangepi_zero_defconfig
+++ b/configs/orangepi_zero_defconfig
@@ -15,3 +15,4 @@ CONFIG_SPL=y
 CONFIG_SPL_SPI_SUNXI=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
+# CONFIG_VIDEO_DE2 is not set
diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c
index 648a96eeb4..3703519aa5 100644
--- a/drivers/i2c/mvtwsi.c
+++ b/drivers/i2c/mvtwsi.c
@@ -37,6 +37,14 @@ DECLARE_GLOBAL_DATA_PTR;
 #endif /* CONFIG_DM_I2C */
 
 /*
+ * On SUNXI, we get CONFIG_SYS_TCLK from this include, so we want to
+ * always have it.
+ */
+#if defined(CONFIG_DM_I2C) && defined(CONFIG_ARCH_SUNXI)
+#include <asm/arch/i2c.h>
+#endif
+
+/*
  * TWSI register structure
  */
 
@@ -831,6 +839,7 @@ static const struct dm_i2c_ops mvtwsi_i2c_ops = {
 static const struct udevice_id mvtwsi_i2c_ids[] = {
 	{ .compatible = "marvell,mv64xxx-i2c", },
 	{ .compatible = "marvell,mv78230-i2c", },
+	{ .compatible = "allwinner,sun6i-a31-i2c", },
 	{ /* sentinel */ }
 };
 
diff --git a/drivers/power/sy8106a.c b/drivers/power/sy8106a.c
index bbf116f655..f9db3965f2 100644
--- a/drivers/power/sy8106a.c
+++ b/drivers/power/sy8106a.c
@@ -12,6 +12,7 @@
 #define SY8106A_VOUT1_SEL 1
 #define SY8106A_VOUT1_SEL_ENABLE (1 << 7)
 
+#ifdef CONFIG_SPL_BUILD
 static u8 sy8106a_mvolt_to_cfg(int mvolt, int min, int max, int div)
 {
 	if (mvolt < min)
@@ -27,3 +28,4 @@ int sy8106a_set_vout1(unsigned int mvolt)
 	u8 data = sy8106a_mvolt_to_cfg(mvolt, 680, 1950, 10) | SY8106A_VOUT1_SEL_ENABLE;
 	return i2c_write(SY8106A_I2C_ADDR, SY8106A_VOUT1_SEL, 1, &data, 1);
 }
+#endif
diff --git a/drivers/video/sunxi/Makefile b/drivers/video/sunxi/Makefile
index dfc9b47a1f..b8afd892ad 100644
--- a/drivers/video/sunxi/Makefile
+++ b/drivers/video/sunxi/Makefile
@@ -6,3 +6,4 @@
 #
 
 obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o lcdc.o ../videomodes.o
+obj-$(CONFIG_VIDEO_DE2) += sunxi_de2.o sunxi_dw_hdmi.o lcdc.o ../dw_hdmi.o
diff --git a/drivers/video/sunxi/sunxi_de2.c b/drivers/video/sunxi/sunxi_de2.c
new file mode 100644
index 0000000000..9a32c3a020
--- /dev/null
+++ b/drivers/video/sunxi/sunxi_de2.c
@@ -0,0 +1,258 @@
+/*
+ * Allwinner DE2 display driver
+ *
+ * (C) Copyright 2017 Jernej Skrabec <jernej.skrabec@siol.net>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <display.h>
+#include <dm.h>
+#include <edid.h>
+#include <video.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/display2.h>
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum {
+	/* Maximum LCD size we support */
+	LCD_MAX_WIDTH		= 3840,
+	LCD_MAX_HEIGHT		= 2160,
+	LCD_MAX_LOG2_BPP	= VIDEO_BPP32,
+};
+
+static void sunxi_de2_composer_init(void)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+#ifdef CONFIG_MACH_SUN50I
+	u32 reg_value;
+
+	/* set SRAM for video use (A64 only) */
+	reg_value = readl(SUNXI_SRAMC_BASE + 0x04);
+	reg_value &= ~(0x01 << 24);
+	writel(reg_value, SUNXI_SRAMC_BASE + 0x04);
+#endif
+
+	clock_set_pll10(432000000);
+
+	/* Set DE parent to pll10 */
+	clrsetbits_le32(&ccm->de_clk_cfg, CCM_DE2_CTRL_PLL_MASK,
+			CCM_DE2_CTRL_PLL10);
+
+	/* Set ahb gating to pass */
+	setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_DE);
+	setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_DE);
+
+	/* Clock on */
+	setbits_le32(&ccm->de_clk_cfg, CCM_DE2_CTRL_GATE);
+}
+
+static void sunxi_de2_mode_set(int mux, const struct display_timing *mode,
+			       int bpp, ulong address)
+{
+	ulong de_mux_base = (mux == 0) ?
+			    SUNXI_DE2_MUX0_BASE : SUNXI_DE2_MUX1_BASE;
+	struct de_clk * const de_clk_regs =
+		(struct de_clk *)(SUNXI_DE2_BASE);
+	struct de_glb * const de_glb_regs =
+		(struct de_glb *)(de_mux_base +
+				  SUNXI_DE2_MUX_GLB_REGS);
+	struct de_bld * const de_bld_regs =
+		(struct de_bld *)(de_mux_base +
+				  SUNXI_DE2_MUX_BLD_REGS);
+	struct de_ui * const de_ui_regs =
+		(struct de_ui *)(de_mux_base +
+				 SUNXI_DE2_MUX_CHAN_REGS +
+				 SUNXI_DE2_MUX_CHAN_SZ * 1);
+	u32 size = SUNXI_DE2_WH(mode->hactive.typ, mode->vactive.typ);
+	int channel;
+	u32 format;
+
+	/* enable clock */
+#ifdef CONFIG_MACH_SUN8I_H3
+	setbits_le32(&de_clk_regs->rst_cfg, (mux == 0) ? 1 : 4);
+#else
+	setbits_le32(&de_clk_regs->rst_cfg, BIT(mux));
+#endif
+	setbits_le32(&de_clk_regs->gate_cfg, BIT(mux));
+	setbits_le32(&de_clk_regs->bus_cfg, BIT(mux));
+
+	clrbits_le32(&de_clk_regs->sel_cfg, 1);
+
+	writel(SUNXI_DE2_MUX_GLB_CTL_EN, &de_glb_regs->ctl);
+	writel(0, &de_glb_regs->status);
+	writel(1, &de_glb_regs->dbuff);
+	writel(size, &de_glb_regs->size);
+
+	for (channel = 0; channel < 4; channel++) {
+		void *ch = (void *)(de_mux_base + SUNXI_DE2_MUX_CHAN_REGS +
+				    SUNXI_DE2_MUX_CHAN_SZ * channel);
+		memset(ch, 0, (channel == 0) ?
+			sizeof(struct de_vi) : sizeof(struct de_ui));
+	}
+	memset(de_bld_regs, 0, sizeof(struct de_bld));
+
+	writel(0x00000101, &de_bld_regs->fcolor_ctl);
+
+	writel(1, &de_bld_regs->route);
+
+	writel(0, &de_bld_regs->premultiply);
+	writel(0xff000000, &de_bld_regs->bkcolor);
+
+	writel(0x03010301, &de_bld_regs->bld_mode[0]);
+
+	writel(size, &de_bld_regs->output_size);
+	writel(mode->flags & DISPLAY_FLAGS_INTERLACED ? 2 : 0,
+	       &de_bld_regs->out_ctl);
+	writel(0, &de_bld_regs->ck_ctl);
+
+	writel(0xff000000, &de_bld_regs->attr[0].fcolor);
+	writel(size, &de_bld_regs->attr[0].insize);
+
+	/* Disable all other units */
+	writel(0, de_mux_base + SUNXI_DE2_MUX_VSU_REGS);
+	writel(0, de_mux_base + SUNXI_DE2_MUX_GSU1_REGS);
+	writel(0, de_mux_base + SUNXI_DE2_MUX_GSU2_REGS);
+	writel(0, de_mux_base + SUNXI_DE2_MUX_GSU3_REGS);
+	writel(0, de_mux_base + SUNXI_DE2_MUX_FCE_REGS);
+	writel(0, de_mux_base + SUNXI_DE2_MUX_BWS_REGS);
+	writel(0, de_mux_base + SUNXI_DE2_MUX_LTI_REGS);
+	writel(0, de_mux_base + SUNXI_DE2_MUX_PEAK_REGS);
+	writel(0, de_mux_base + SUNXI_DE2_MUX_ASE_REGS);
+	writel(0, de_mux_base + SUNXI_DE2_MUX_FCC_REGS);
+	writel(0, de_mux_base + SUNXI_DE2_MUX_DCSC_REGS);
+
+	switch (bpp) {
+	case 16:
+		format = SUNXI_DE2_UI_CFG_ATTR_FMT(SUNXI_DE2_FORMAT_RGB_565);
+		break;
+	case 32:
+	default:
+		format = SUNXI_DE2_UI_CFG_ATTR_FMT(SUNXI_DE2_FORMAT_XRGB_8888);
+		break;
+	}
+
+	writel(SUNXI_DE2_UI_CFG_ATTR_EN | format, &de_ui_regs->cfg[0].attr);
+	writel(size, &de_ui_regs->cfg[0].size);
+	writel(0, &de_ui_regs->cfg[0].coord);
+	writel((bpp / 8) * mode->hactive.typ, &de_ui_regs->cfg[0].pitch);
+	writel(address, &de_ui_regs->cfg[0].top_laddr);
+	writel(size, &de_ui_regs->ovl_size);
+
+	/* apply settings */
+	writel(1, &de_glb_regs->dbuff);
+}
+
+static int sunxi_de2_init(struct udevice *dev, ulong fbbase,
+			  enum video_log2_bpp l2bpp,
+			  struct udevice *disp, int mux)
+{
+	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+	struct display_timing timing;
+	struct display_plat *disp_uc_plat;
+	int ret;
+
+	disp_uc_plat = dev_get_uclass_platdata(disp);
+	debug("Using device '%s', disp_uc_priv=%p\n", disp->name, disp_uc_plat);
+	if (display_in_use(disp)) {
+		debug("   - device in use\n");
+		return -EBUSY;
+	}
+
+	disp_uc_plat->source_id = mux;
+
+	ret = device_probe(disp);
+	if (ret) {
+		debug("%s: device '%s' display won't probe (ret=%d)\n",
+		      __func__, dev->name, ret);
+		return ret;
+	}
+
+	ret = display_read_timing(disp, &timing);
+	if (ret) {
+		debug("%s: Failed to read timings\n", __func__);
+		return ret;
+	}
+
+	sunxi_de2_composer_init();
+	sunxi_de2_mode_set(mux, &timing, 1 << l2bpp, fbbase);
+
+	ret = display_enable(disp, 1 << l2bpp, &timing);
+	if (ret) {
+		debug("%s: Failed to enable display\n", __func__);
+		return ret;
+	}
+
+	uc_priv->xsize = timing.hactive.typ;
+	uc_priv->ysize = timing.vactive.typ;
+	uc_priv->bpix = l2bpp;
+	debug("fb=%lx, size=%d %d\n", fbbase, uc_priv->xsize, uc_priv->ysize);
+
+	return 0;
+}
+
+static int sunxi_de2_probe(struct udevice *dev)
+{
+	struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+	struct udevice *disp;
+	int ret;
+	int mux;
+
+	/* Before relocation we don't need to do anything */
+	if (!(gd->flags & GD_FLG_RELOC))
+		return 0;
+
+	ret = uclass_find_device_by_name(UCLASS_DISPLAY,
+					 "sunxi_dw_hdmi", &disp);
+	if (ret) {
+		debug("%s: hdmi display not found (ret=%d)\n", __func__, ret);
+		return ret;
+	}
+
+	if (IS_ENABLED(CONFIG_MACH_SUNXI_H3_H5))
+		mux = 0;
+	else
+		mux = 1;
+
+	ret = sunxi_de2_init(dev, plat->base, VIDEO_BPP32, disp, mux);
+	if (ret)
+		return ret;
+
+	video_set_flush_dcache(dev, 1);
+
+	return 0;
+}
+
+static int sunxi_de2_bind(struct udevice *dev)
+{
+	struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+
+	plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT *
+		(1 << LCD_MAX_LOG2_BPP) / 8;
+
+	return 0;
+}
+
+static const struct video_ops sunxi_de2_ops = {
+};
+
+U_BOOT_DRIVER(sunxi_de2) = {
+	.name	= "sunxi_de2",
+	.id	= UCLASS_VIDEO,
+	.ops	= &sunxi_de2_ops,
+	.bind	= sunxi_de2_bind,
+	.probe	= sunxi_de2_probe,
+	.flags	= DM_FLAG_PRE_RELOC,
+};
+
+U_BOOT_DEVICE(sunxi_de2) = {
+	.name = "sunxi_de2"
+};
diff --git a/drivers/video/sunxi/sunxi_dw_hdmi.c b/drivers/video/sunxi/sunxi_dw_hdmi.c
new file mode 100644
index 0000000000..33920a2b67
--- /dev/null
+++ b/drivers/video/sunxi/sunxi_dw_hdmi.c
@@ -0,0 +1,389 @@
+/*
+ * Allwinner DW HDMI bridge
+ *
+ * (C) Copyright 2017 Jernej Skrabec <jernej.skrabec@siol.net>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <display.h>
+#include <dm.h>
+#include <dw_hdmi.h>
+#include <edid.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/lcdc.h>
+
+struct sunxi_dw_hdmi_priv {
+	struct dw_hdmi hdmi;
+	int mux;
+};
+
+struct sunxi_hdmi_phy {
+	u32 pol;
+	u32 res1[3];
+	u32 read_en;
+	u32 unscramble;
+	u32 res2[2];
+	u32 ctrl;
+	u32 unk1;
+	u32 unk2;
+	u32 pll;
+	u32 clk;
+	u32 unk3;
+	u32 status;
+};
+
+#define HDMI_PHY_OFFS 0x10000
+
+static int sunxi_dw_hdmi_get_divider(uint clock)
+{
+	/*
+	 * Due to missing documentaion of HDMI PHY, we know correct
+	 * settings only for following four PHY dividers. Select one
+	 * based on clock speed.
+	 */
+	if (clock <= 27000000)
+		return 11;
+	else if (clock <= 74250000)
+		return 4;
+	else if (clock <= 148500000)
+		return 2;
+	else
+		return 1;
+}
+
+static void sunxi_dw_hdmi_phy_init(void)
+{
+	struct sunxi_hdmi_phy * const phy =
+		(struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS);
+	unsigned long tmo;
+	u32 tmp;
+
+	/*
+	 * HDMI PHY settings are taken as-is from Allwinner BSP code.
+	 * There is no documentation.
+	 */
+	writel(0, &phy->ctrl);
+	setbits_le32(&phy->ctrl, BIT(0));
+	udelay(5);
+	setbits_le32(&phy->ctrl, BIT(16));
+	setbits_le32(&phy->ctrl, BIT(1));
+	udelay(10);
+	setbits_le32(&phy->ctrl, BIT(2));
+	udelay(5);
+	setbits_le32(&phy->ctrl, BIT(3));
+	udelay(40);
+	setbits_le32(&phy->ctrl, BIT(19));
+	udelay(100);
+	setbits_le32(&phy->ctrl, BIT(18));
+	setbits_le32(&phy->ctrl, 7 << 4);
+
+	/* Note that Allwinner code doesn't fail in case of timeout */
+	tmo = timer_get_us() + 2000;
+	while ((readl(&phy->status) & 0x80) == 0) {
+		if (timer_get_us() > tmo) {
+			printf("Warning: HDMI PHY init timeout!\n");
+			break;
+		}
+	}
+
+	setbits_le32(&phy->ctrl, 0xf << 8);
+	setbits_le32(&phy->ctrl, BIT(7));
+
+	writel(0x39dc5040, &phy->pll);
+	writel(0x80084343, &phy->clk);
+	udelay(10000);
+	writel(1, &phy->unk3);
+	setbits_le32(&phy->pll, BIT(25));
+	udelay(100000);
+	tmp = (readl(&phy->status) & 0x1f800) >> 11;
+	setbits_le32(&phy->pll, BIT(31) | BIT(30));
+	setbits_le32(&phy->pll, tmp);
+	writel(0x01FF0F7F, &phy->ctrl);
+	writel(0x80639000, &phy->unk1);
+	writel(0x0F81C405, &phy->unk2);
+
+	/* enable read access to HDMI controller */
+	writel(0x54524545, &phy->read_en);
+	/* descramble register offsets */
+	writel(0x42494E47, &phy->unscramble);
+}
+
+static int sunxi_dw_hdmi_get_plug_in_status(void)
+{
+	struct sunxi_hdmi_phy * const phy =
+		(struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS);
+
+	return !!(readl(&phy->status) & (1 << 19));
+}
+
+static int sunxi_dw_hdmi_wait_for_hpd(void)
+{
+	ulong start;
+
+	start = get_timer(0);
+	do {
+		if (sunxi_dw_hdmi_get_plug_in_status())
+			return 0;
+		udelay(100);
+	} while (get_timer(start) < 300);
+
+	return -1;
+}
+
+static void sunxi_dw_hdmi_phy_set(uint clock)
+{
+	struct sunxi_hdmi_phy * const phy =
+		(struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS);
+	int div = sunxi_dw_hdmi_get_divider(clock);
+	u32 tmp;
+
+	/*
+	 * Unfortunately, we don't know much about those magic
+	 * numbers. They are taken from Allwinner BSP driver.
+	 */
+	switch (div) {
+	case 1:
+		writel(0x30dc5fc0, &phy->pll);
+		writel(0x800863C0, &phy->clk);
+		mdelay(10);
+		writel(0x00000001, &phy->unk3);
+		setbits_le32(&phy->pll, BIT(25));
+		mdelay(200);
+		tmp = (readl(&phy->status) & 0x1f800) >> 11;
+		setbits_le32(&phy->pll, BIT(31) | BIT(30));
+		if (tmp < 0x3d)
+			setbits_le32(&phy->pll, tmp + 2);
+		else
+			setbits_le32(&phy->pll, 0x3f);
+		mdelay(100);
+		writel(0x01FFFF7F, &phy->ctrl);
+		writel(0x8063b000, &phy->unk1);
+		writel(0x0F8246B5, &phy->unk2);
+		break;
+	case 2:
+		writel(0x39dc5040, &phy->pll);
+		writel(0x80084381, &phy->clk);
+		mdelay(10);
+		writel(0x00000001, &phy->unk3);
+		setbits_le32(&phy->pll, BIT(25));
+		mdelay(100);
+		tmp = (readl(&phy->status) & 0x1f800) >> 11;
+		setbits_le32(&phy->pll, BIT(31) | BIT(30));
+		setbits_le32(&phy->pll, tmp);
+		writel(0x01FFFF7F, &phy->ctrl);
+		writel(0x8063a800, &phy->unk1);
+		writel(0x0F81C485, &phy->unk2);
+		break;
+	case 4:
+		writel(0x39dc5040, &phy->pll);
+		writel(0x80084343, &phy->clk);
+		mdelay(10);
+		writel(0x00000001, &phy->unk3);
+		setbits_le32(&phy->pll, BIT(25));
+		mdelay(100);
+		tmp = (readl(&phy->status) & 0x1f800) >> 11;
+		setbits_le32(&phy->pll, BIT(31) | BIT(30));
+		setbits_le32(&phy->pll, tmp);
+		writel(0x01FFFF7F, &phy->ctrl);
+		writel(0x8063b000, &phy->unk1);
+		writel(0x0F81C405, &phy->unk2);
+		break;
+	case 11:
+		writel(0x39dc5040, &phy->pll);
+		writel(0x8008430a, &phy->clk);
+		mdelay(10);
+		writel(0x00000001, &phy->unk3);
+		setbits_le32(&phy->pll, BIT(25));
+		mdelay(100);
+		tmp = (readl(&phy->status) & 0x1f800) >> 11;
+		setbits_le32(&phy->pll, BIT(31) | BIT(30));
+		setbits_le32(&phy->pll, tmp);
+		writel(0x01FFFF7F, &phy->ctrl);
+		writel(0x8063b000, &phy->unk1);
+		writel(0x0F81C405, &phy->unk2);
+		break;
+	}
+}
+
+static void sunxi_dw_hdmi_pll_set(uint clk_khz)
+{
+	int value, n, m, div = 0, diff;
+	int best_n = 0, best_m = 0, best_diff = 0x0FFFFFFF;
+
+	div = sunxi_dw_hdmi_get_divider(clk_khz * 1000);
+
+	/*
+	 * Find the lowest divider resulting in a matching clock. If there
+	 * is no match, pick the closest lower clock, as monitors tend to
+	 * not sync to higher frequencies.
+	 */
+	for (m = 1; m <= 16; m++) {
+		n = (m * div * clk_khz) / 24000;
+
+		if ((n >= 1) && (n <= 128)) {
+			value = (24000 * n) / m / div;
+			diff = clk_khz - value;
+			if (diff < best_diff) {
+				best_diff = diff;
+				best_m = m;
+				best_n = n;
+			}
+		}
+	}
+
+	clock_set_pll3_factors(best_m, best_n);
+	debug("dotclock: %dkHz = %dkHz: (24MHz * %d) / %d / %d\n",
+	      clk_khz, (clock_get_pll3() / 1000) / div,
+	      best_n, best_m, div);
+}
+
+static void sunxi_dw_hdmi_lcdc_init(int mux, const struct display_timing *edid,
+				    int bpp)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	int div = sunxi_dw_hdmi_get_divider(edid->pixelclock.typ);
+	struct sunxi_lcdc_reg *lcdc;
+
+	if (mux == 0) {
+		lcdc = (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
+
+		/* Reset off */
+		setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD0);
+
+		/* Clock on */
+		setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD0);
+		writel(CCM_LCD0_CTRL_GATE | CCM_LCD0_CTRL_M(div),
+		       &ccm->lcd0_clk_cfg);
+	} else {
+		lcdc = (struct sunxi_lcdc_reg *)SUNXI_LCD1_BASE;
+
+		/* Reset off */
+		setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD1);
+
+		/* Clock on */
+		setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD1);
+		writel(CCM_LCD1_CTRL_GATE | CCM_LCD1_CTRL_M(div),
+		       &ccm->lcd1_clk_cfg);
+	}
+
+	lcdc_init(lcdc);
+	lcdc_tcon1_mode_set(lcdc, edid, false, false);
+	lcdc_enable(lcdc, bpp);
+}
+
+static int sunxi_dw_hdmi_phy_cfg(struct dw_hdmi *hdmi, uint mpixelclock)
+{
+	sunxi_dw_hdmi_pll_set(mpixelclock/1000);
+	sunxi_dw_hdmi_phy_set(mpixelclock);
+
+	return 0;
+}
+
+static int sunxi_dw_hdmi_read_edid(struct udevice *dev, u8 *buf, int buf_size)
+{
+	struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev);
+
+	return dw_hdmi_read_edid(&priv->hdmi, buf, buf_size);
+}
+
+static int sunxi_dw_hdmi_enable(struct udevice *dev, int panel_bpp,
+				const struct display_timing *edid)
+{
+	struct sunxi_hdmi_phy * const phy =
+		(struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS);
+	struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	ret = dw_hdmi_enable(&priv->hdmi, edid);
+	if (ret)
+		return ret;
+
+	sunxi_dw_hdmi_lcdc_init(priv->mux, edid, panel_bpp);
+
+	/*
+	 * Condition in original code is a bit weird. This is attempt
+	 * to make it more reasonable and it works. It could be that
+	 * bits and conditions are related and should be separated.
+	 */
+	if (!((edid->flags & DISPLAY_FLAGS_HSYNC_HIGH) &&
+	      (edid->flags & DISPLAY_FLAGS_VSYNC_HIGH))) {
+		setbits_le32(&phy->pol, 0x300);
+	}
+
+	setbits_le32(&phy->ctrl, 0xf << 12);
+
+	/*
+	 * This is last hdmi access before boot, so scramble addresses
+	 * again or othwerwise BSP driver won't work. Dummy read is
+	 * needed or otherwise last write doesn't get written correctly.
+	 */
+	(void)readb(SUNXI_HDMI_BASE);
+	writel(0, &phy->unscramble);
+
+	return 0;
+}
+
+static int sunxi_dw_hdmi_probe(struct udevice *dev)
+{
+	struct display_plat *uc_plat = dev_get_uclass_platdata(dev);
+	struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev);
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	int ret;
+
+	/* Set pll3 to 297 MHz */
+	clock_set_pll3(297000000);
+
+	/* Set hdmi parent to pll3 */
+	clrsetbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_PLL_MASK,
+			CCM_HDMI_CTRL_PLL3);
+
+	/* Set ahb gating to pass */
+	setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI);
+	setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI2);
+	setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI);
+	setbits_le32(&ccm->hdmi_slow_clk_cfg, CCM_HDMI_SLOW_CTRL_DDC_GATE);
+
+	/* Clock on */
+	setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE);
+
+	sunxi_dw_hdmi_phy_init();
+
+	ret = sunxi_dw_hdmi_wait_for_hpd();
+	if (ret < 0) {
+		debug("hdmi can not get hpd signal\n");
+		return -1;
+	}
+
+	priv->hdmi.ioaddr = SUNXI_HDMI_BASE;
+	priv->hdmi.i2c_clk_high = 0xd8;
+	priv->hdmi.i2c_clk_low = 0xfe;
+	priv->hdmi.reg_io_width = 1;
+	priv->hdmi.phy_set = sunxi_dw_hdmi_phy_cfg;
+	priv->mux = uc_plat->source_id;
+
+	dw_hdmi_init(&priv->hdmi);
+
+	return 0;
+}
+
+static const struct dm_display_ops sunxi_dw_hdmi_ops = {
+	.read_edid = sunxi_dw_hdmi_read_edid,
+	.enable = sunxi_dw_hdmi_enable,
+};
+
+U_BOOT_DRIVER(sunxi_dw_hdmi) = {
+	.name	= "sunxi_dw_hdmi",
+	.id	= UCLASS_DISPLAY,
+	.ops	= &sunxi_dw_hdmi_ops,
+	.probe	= sunxi_dw_hdmi_probe,
+	.priv_auto_alloc_size = sizeof(struct sunxi_dw_hdmi_priv),
+};
+
+U_BOOT_DEVICE(sunxi_dw_hdmi) = {
+	.name = "sunxi_dw_hdmi"
+};
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 64a190059a..997a92c8be 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -211,11 +211,13 @@
 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
     defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
     defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MVTWSI
+#ifndef CONFIG_DM_I2C
+#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_SPEED		400000
 #define CONFIG_SYS_I2C_SLAVE		0x7f
 #endif
+#endif
 
 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
 #define CONFIG_SYS_I2C_SOFT
@@ -473,6 +475,11 @@ extern int soft_i2c_gpio_scl;
 #define CONSOLE_STDOUT_SETTINGS \
 	"stdout=serial,vga\0" \
 	"stderr=serial,vga\0"
+#elif CONFIG_DM_VIDEO
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONSOLE_STDOUT_SETTINGS \
+	"stdout=serial,vidconsole\0" \
+	"stderr=serial,vidconsole\0"
 #else
 #define CONSOLE_STDOUT_SETTINGS \
 	"stdout=serial\0" \