diff options
| author | Reza Jelveh <reza.jelveh@tuhh.de> | 2014-10-22 05:52:48 +0000 |
|---|---|---|
| committer | erictian <erictian@Edk2> | 2014-10-22 05:52:48 +0000 |
| commit | 43654b1cb92269a6d6374f33f729efe91ed9d788 (patch) | |
| tree | 3b2cf383c4f8add892633896c7c6a4019413a715 /MdeModulePkg | |
| parent | 2cb6eabe0b358fe0d4e4dd602f84b5f5d3e39a6c (diff) | |
MdeModulePkg/AtaAtapiPassThru: When D2H FIS received at PIO DATA-IN transfer, check PxTFD.Error register to confirm if there is a real error for better device compatibilities with Qemu and Marvel9230 sata controllers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Reza Jelveh <reza.jelveh@tuhh.de>
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: A. Sava <asava.dev@gmail.com>
Reviewed-by: Star Zeng <Start.Zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16225 6f19259b-4bc3-4df7-8a09-765794883524
Diffstat (limited to 'MdeModulePkg')
| -rw-r--r-- | MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c | 33 |
1 files changed, 24 insertions, 9 deletions
diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c index 7fc7a2812..72b1e5cc7 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c @@ -704,6 +704,8 @@ AhciPioTransfer ( UINT32 PortTfd;
UINT32 PrdCount;
BOOLEAN InfiniteWait;
+ BOOLEAN PioFisReceived;
+ BOOLEAN D2hFisReceived;
if (Timeout == 0) {
InfiniteWait = TRUE;
@@ -780,15 +782,31 @@ AhciPioTransfer ( Status = EFI_TIMEOUT;
Delay = DivU64x32 (Timeout, 1000) + 1;
do {
+ PioFisReceived = FALSE;
+ D2hFisReceived = FALSE;
Offset = FisBaseAddr + EFI_AHCI_PIO_FIS_OFFSET;
-
Status = AhciCheckMemSet (Offset, EFI_AHCI_FIS_TYPE_MASK, EFI_AHCI_FIS_PIO_SETUP, NULL);
if (!EFI_ERROR (Status)) {
+ PioFisReceived = TRUE;
+ }
+ //
+ // According to SATA 2.6 spec section 11.7, D2h FIS means an error encountered.
+ // But Qemu and Marvel 9230 sata controller may just receive a D2h FIS from device
+ // after the transaction is finished successfully.
+ // To get better device compatibilities, we further check if the PxTFD's ERR bit is set.
+ // By this way, we can know if there is a real error happened.
+ //
+ Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET;
+ Status = AhciCheckMemSet (Offset, EFI_AHCI_FIS_TYPE_MASK, EFI_AHCI_FIS_REGISTER_D2H, NULL);
+ if (!EFI_ERROR (Status)) {
+ D2hFisReceived = TRUE;
+ }
+
+ if (PioFisReceived || D2hFisReceived) {
Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
PortTfd = AhciReadReg (PciIo, (UINT32) Offset);
//
// PxTFD will be updated if there is a D2H or SetupFIS received.
- // For PIO IN transfer, D2H means a device error. Therefore we only need to check the TFD after receiving a SetupFIS.
//
if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) {
Status = EFI_DEVICE_ERROR;
@@ -797,23 +815,20 @@ AhciPioTransfer ( PrdCount = *(volatile UINT32 *) (&(AhciRegisters->AhciCmdList[0].AhciCmdPrdbc));
if (PrdCount == DataCount) {
+ Status = EFI_SUCCESS;
break;
}
}
- Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET;
- Status = AhciCheckMemSet (Offset, EFI_AHCI_FIS_TYPE_MASK, EFI_AHCI_FIS_REGISTER_D2H, NULL);
- if (!EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- break;
- }
-
//
// Stall for 100 microseconds.
//
MicroSecondDelay(100);
Delay--;
+ if (Delay == 0) {
+ Status = EFI_TIMEOUT;
+ }
} while (InfiniteWait || (Delay > 0));
} else {
//
|