HisiPkg: D01: Move bootwrapper to SRAM

Reserving DDR memory is a very tricky thing to do. We always need to make
sure we don't overlap with memory regions the guest uncondionally uses.

However, we need to keep the bootwrapper code resident in memory for CPU
hotplug. So let's just move it into SRAM. There it can stay happily ever
after.

Unfortunately we need to make sure we only copy the bootwrapper to SRAM,
not a full NAND block. So this patch also introduces a bounce buffer for
NAND access.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Wei Xu <xuwei5@huawei.com>

1 files changed, 21 insertions, 7 deletions

diff --git a/HisiPkg/D01BoardPkg/Bds/Bds.c b/HisiPkg/D01BoardPkg/Bds/Bds.c
index 4e2e34679..1792fccbc 100644
--- a/HisiPkg/D01BoardPkg/Bds/Bds.c
+++ b/HisiPkg/D01BoardPkg/Bds/Bds.c
@@ -80,8 +80,8 @@ BootGo (
 #define FILESYSTEM_SIZE                 0x1800000

 

 //actual size of copying file to DDR, it should not bigger than estimate size

-#define TEXT_COPY_SIZE                  0x20000

-#define MONITOR_COPY_SIZE               0x20000

+#define TEXT_COPY_SIZE                  0x8000

+#define MONITOR_COPY_SIZE               0x8000

 #define KERNEL_COPY_SIZE                0xa00000

 #define FILESYSTEM_COPY_SIZE            0x1800000

 

@@ -552,26 +552,40 @@ EFI_STATUS CopyNandToMem(void* Dest, UINT32 StartBlockNum, UINT32 LengthCopy)
 
 static void ReadBootwrapper(void)
 {
-    (VOID)AsciiPrint("\nCopy BootWrapper from FLASH to DDR...");
+    void *buf;
+    NAND_CMD_INFO_STRU ulNandCMDInfo = { 0 };
+    #ifdef NANDFLASHREAD
+    EFI_NAND_DRIVER_PROTOCOL *nandDriver = NULL;
+
+    gBS->LocateProtocol (&gNANDDriverProtocolGuid, NULL, (VOID *) &nandDriver);
+    ulNandCMDInfo = nandDriver->NandFlashGetCMDInfo(nandDriver);
+    #endif
+    buf = AllocatePool(ulNandCMDInfo.ulBlockSize);
+
+    (VOID)AsciiPrint("\nCopy Bootwrapper from FLASH to SRAM...");
 
     #ifdef NANDFLASHREAD
-        CopyNandToMem((void *)TEXT_DDR_BASE, TEXT_BLOCKNUM_NANDFLASH, TEXT_COPY_SIZE);
+        CopyNandToMem(buf, TEXT_BLOCKNUM_NANDFLASH, ulNandCMDInfo.ulBlockSize);
+        memcpy((void *)TEXT_SRAM_BASE, buf, TEXT_COPY_SIZE);
         (VOID)AsciiPrint("\nThe .text file is transmitted ok!\n");
     #else
          /* copy.text */
-        memcpy((void *)TEXT_DDR_BASE, (void *)TEXT_FLASH_BASE, TEXT_COPY_SIZE);
+        memcpy((void *)TEXT_SRAM_BASE, (void *)TEXT_FLASH_BASE, TEXT_COPY_SIZE);
         (VOID)AsciiPrint("\nThe .text file is transmitted ok!\n");
     #endif
 
     #ifdef NANDFLASHREAD
          /* copy .monitor */
-        CopyNandToMem((void *)MONITOR_DDR_BASE, MONITOR_BLOCKNUM_NANDFLASH, MONITOR_COPY_SIZE);
+        CopyNandToMem(buf, MONITOR_BLOCKNUM_NANDFLASH, ulNandCMDInfo.ulBlockSize);
+        memcpy((void *)MONITOR_SRAM_BASE, buf, MONITOR_COPY_SIZE);
         (VOID)AsciiPrint("The .monitor file is transmitted ok!\n");
     #else
          /* copy .monitor */
-        memcpy((void *)MONITOR_DDR_BASE, (void *)MONITOR_FLASH_BASE, MONITOR_COPY_SIZE);
+        memcpy((void *)MONITOR_SRAM_BASE, (void *)MONITOR_FLASH_BASE, MONITOR_COPY_SIZE);
         (VOID)AsciiPrint("The .monitor file is transmitted ok!\n");
     #endif
+
+    gBS->FreePool(buf);
 }
 
 /**