aboutsummaryrefslogtreecommitdiff
path: root/drivers/regulator
AgeCommit message (Collapse)Author
2014-04-14regulator: pbias: Convert to use regmap helper functionsAxel Lin
This patch converts this driver to use the regmap helper functions provided by regulator core. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Balaji T K <balajitk@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14regulator: pbias: Fix is_enabled callback implementationAxel Lin
The is_enabled implementation is wrong in some cases: e.g. for pbias_mmc_omap5: enable_mask is : BIT(27) | BIT(25) | BIT(26) However, pbias_regulator_enable() only sets BIT(27) | BIT(26) bits. So is_enabled callback will always return false in this case. Fix the logic to compare the register value with info->enable rather than info->enable_mask. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Balaji T K <balajitk@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-11Merge tag 'regulator-v3.15-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A few driver specific fixes that have come in over the merge window, all only relevant for the specific driver" * tag 'regulator-v3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: bcm590xx: Set n_voltages for linear reg regulator: s5m8767: Fix carried over ena_gpio assignment regulator: s2mps11: Don't check enable_shift before setting enable ramp rate regulator: s2mpa01: Don't check enable_shift before setting enable ramp rate
2014-04-10Merge remote-tracking branches 'regulator/fix/bcm590xx', 'regulator/fix/s2m' ↵Mark Brown
and 'regulator/fix/s5m8767' into regulator-linus
2014-04-10regulator: bcm590xx: Set n_voltages for linear regTim Kryger
Fix the macro used to define linear range regulators to include the number of voltages. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Acked-by: Matt Porter <mporter@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-09Merge tag 'mmc-updates-for-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.15: Core: - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V - Add GPIO descriptor based slot-gpio card detect API Drivers: - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c - mmci: Support HW busy detection on ux500 - omap: Support MMC_ERASE - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23 - rtsx: Support pre-req/post-req async - sdhci: Add support for Realtek RTS5250 controllers - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs" * tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits) mmc: sdhci-acpi: Intel SDIO has broken card detect mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller mmc: sdhci-msm: Add platform_execute_tuning implementation mmc: sdhci-msm: Initial support for Qualcomm chipsets mmc: sdhci-msm: Qualcomm SDHCI binding documentation sdhci: only reprogram retuning timer when flag is set mmc: rename ARCH_BCM to ARCH_BCM_MOBILE mmc: sdhci: Allow for irq being shared mmc: sdhci-acpi: Add device id 80860F16 mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14 mmc: slot-gpio: Add GPIO descriptor based CD GPIO API mmc: slot-gpio: Split out CD IRQ request into a separate function mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform" mmc: sdhci-spear: use generic card detection gpio support mmc: sdhci-spear: remove support for power gpio mmc: sdhci-spear: simplify resource handling mmc: sdhci-spear: fix platform_data usage mmc: sdhci-spear: fix error handling paths for DT mmc: sdhci-bcm-kona: fix build errors when built-in ...
2014-04-07regulator: s5m8767: Fix carried over ena_gpio assignmentKrzysztof Kozlowski
During registration of regulators if external control for regulator was set in DTS the ena_gpio and ena_gpio_flags fields of regulator_config were set to proper values. However the same regulator_config was used in next iterations of loop so the ena_gpio fields carried over to next regulators. The issue was not observed as ena_gpio is supported only for Buck9 regulator which is often the last regulator parsed from DTS. Be sure to clear ena_gpio config fields before registering the regulator. Fixes: ee1e0994ab1bd (regulator: s5m8767: Use GPIO for controlling Buck9/eMMC) Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual rocket science -- mostly documentation and comment updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: sparse: fix comment doc: fix double words isdn: capi: fix "CAPI_VERSION" comment doc: DocBook: Fix typos in xml and template file Bluetooth: add module name for btwilink driver core: unexport static function create_syslog_header mmc: core: typo fix in printk specifier ARM: spear: clean up editing mistake net-sysfs: fix comment typo 'CONFIG_SYFS' doc: Insert MODULE_ in module-signing macros Documentation: update URL to hfsplus Technote 1150 gpio: update path to documentation ixgbe: Fix format string in ixgbe_fcoe. Kconfig: Remove useless "default N" lines user_namespace.c: Remove duplicated word in comment CREDITS: fix formatting treewide: Fix typo in Documentation/DocBook mm: Fix warning on make htmldocs caused by slab.c ata: ata-samsung_cf: cleanup in header file idr: remove unused prototype of idr_free()
2014-04-02regulator: s2mps11: Don't check enable_shift before setting enable ramp rateAxel Lin
Current code misses updating the register when enable_shift is 0. e.g. S2MPS11_BUCK9_RAMP_SHIFT and S2MPS11_BUCK6_RAMP_EN_SHIFT are 0. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-02regulator: s2mpa01: Don't check enable_shift before setting enable ramp rateAxel Lin
Current code misses updating the register when enable_shift is 0. e.g. S2MPA01_BUCK4_RAMP_EN_SHIFT is 0. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-26Merge remote-tracking branches 'regulator/topic/tps65218', ↵Mark Brown
'regulator/topic/tps6524x', 'regulator/topic/tps6586x', 'regulator/topic/tps65910', 'regulator/topic/tps80031', 'regulator/topic/wm831x', 'regulator/topic/wm8350' and 'regulator/topic/wm8994' into regulator-next
2014-03-26Merge remote-tracking branches 'regulator/topic/s5m8767', ↵Mark Brown
'regulator/topic/st-pwm', 'regulator/topic/ti-abb', 'regulator/topic/tps51632', 'regulator/topic/tps62360', 'regulator/topic/tps6507x', 'regulator/topic/tps65090' and 'regulator/topic/tps65217' into regulator-next
2014-03-26Merge remote-tracking branches 'regulator/topic/max8973', ↵Mark Brown
'regulator/topic/max8997', 'regulator/topic/max8998', 'regulator/topic/mc13xxx', 'regulator/topic/pfuze100', 'regulator/topic/rc5t583' and 'regulator/topic/s2mps11' into regulator-next
2014-03-26Merge remote-tracking branches 'regulator/topic/max1586', ↵Mark Brown
'regulator/topic/max77686', 'regulator/topic/max77693', 'regulator/topic/max8649', 'regulator/topic/max8660', 'regulator/topic/max8907', 'regulator/topic/max8925' and 'regulator/topic/max8952' into regulator-next
2014-03-26Merge remote-tracking branches 'regulator/topic/doc', ↵Mark Brown
'regulator/topic/enable', 'regulator/topic/fan53555', 'regulator/topic/fixed', 'regulator/topic/gpio', 'regulator/topic/lp3971', 'regulator/topic/lp872x' and 'regulator/topic/max14577' into regulator-next
2014-03-26Merge remote-tracking branches 'regulator/topic/bcm590xx', ↵Mark Brown
'regulator/topic/da9052', 'regulator/topic/da9055', 'regulator/topic/da9063', 'regulator/topic/da9210', 'regulator/topic/db8500' and 'regulator/topic/dbx500' into regulator-next
2014-03-26Merge remote-tracking branches 'regulator/topic/88pm800', ↵Mark Brown
'regulator/topic/88pm8607', 'regulator/topic/aat2870', 'regulator/topic/act8865', 'regulator/topic/anatop', 'regulator/topic/arizona', 'regulator/topic/as3711' and 'regulator/topic/as3722' into regulator-next
2014-03-26Merge remote-tracking branch 'regulator/topic/core' into regulator-nextMark Brown
2014-03-26regulator: aat2870: Use regulator_map_voltage_ascendAxel Lin
The voltages in aat2870_ldo_voltages table are in ascendant order, so use regulator_map_voltage_ascend. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-24regulator: st-pwm: Convert to get_voltage_selAxel Lin
Also remove test for selector in st_pwm_regulator_set_voltage_sel, the checking is already done in .list_voltage. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-21regulator: Add new driver for ST's PWM controlled voltage regulatorsLee Jones
On some STMicroelectronics hardware reside regulators consisting partly of a PWM input connected to the feedback loop. As the PWM duty-cycle is varied the output voltage adapts. This driver allows us to vary the output voltage by adapting the PWM input duty-cycle. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-21regulator: bcm590xx: Remove **rdev from struct bcm590xx_regAxel Lin
The **rdev of 'struct bcm590xx_reg' isn't used anywhere in the driver so remove it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Matt Porter <mporter@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-21regulator: bcm590xx: Make the modalias matches the driver nameAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-21regulator: s5m8767: Convert to use regulator_[enable|disable|is_enabled]_regmapAxel Lin
Since commit ca5d1b3524b4d "regulator: helpers: Modify helpers enabling multi-bit control", we can set enable_val setting for device that use multiple bits for control. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-21regulator: db8500-prcmu: Set 1.8V as a fixed voltage for vsmps2Ulf Hansson
This regulator is used for system IO and is fixed to 1.8V. Let's give consumers the option to fetch the voltage level. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-19regulator: s2mps11: Add missing of_node_putSachin Kamat
Add of_node_put to decrement the ref count. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-19regulator: s2mps11: Use of_get_child_by_nameSachin Kamat
of_find_node_by_name walks the allnodes list, and can thus walk outside of the parent node. Use of_get_child_by_name instead. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-19regulator: s2mps11: Add set_suspend_disable for S2MPS14Krzysztof Kozlowski
S2MPS14 regulators support suspend mode where their status is controlled by PWREN coming from SoC. This patch implements the set_suspend_disable for S2MPS14 regulators. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-19regulator: s2mps11: Add support for S2MPS14 regulatorsKrzysztof Kozlowski
Add support for S2MPS14 PMIC regulators to s2mps11 driver. The S2MPS14 has fewer BUCK-s and LDO-s than S2MPS11. It also does not support controlling the BUCK ramp delay. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-19Merge branch 'ib-mfd-regulator-3.15' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into regulator-s2mps11
2014-03-19regulator: max8660: Fix brace alignmentSachin Kamat
Move the "};" to next line as is the general coding practice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-19regulator: dbx500: use seq_puts() instead of seq_printf()Jingoo Han
For a constant format without additional arguments, use seq_puts() instead of seq_printf(). Also, it fixes the following checkpatch warning. WARNING: Prefer seq_puts to seq_printf Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-19regulator: dbx500-prcmu: Silence checkpatch warningsSachin Kamat
Silences the following warning type: WARNING: Missing a blank line after declarations Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-18regulator: anatop: Remove checking control_reg in [set|get]_voltage_selAxel Lin
Remove checking control_reg in [set|get]_voltage_sel and then convert to use regulator_[set|get]_voltage_sel_regmap for [set|get]_voltage_sel callbacks. The anatop-reg-offset property is a required property rather than optional property. So the question is what is the meaning of setting anatop-reg-offset to 0? If 0 is a valid setting for anatop-reg-offset and it has special meaning, we had better document it in the binding document. Otherwise, remove the testing for control_reg in the driver. No anatop voltage regulator node in the dts files set anatop-reg-offset to 0. So I think it's safe to remove testing if control_reg is 0. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-18regulator: max8952: Silence checkpatch warningSachin Kamat
Silences the following type of checkpatch warning: WARNING: Missing a blank line after declarations Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-18regulator: max8925: Silence checkpatch warningSachin Kamat
Silences the following type of checkpatch warning: WARNING: Missing a blank line after declarations Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-18regulator: max8660: Silence checkpatch warningsSachin Kamat
Silences the following type of error/warnings: ERROR: that open brace { should be on the previous line WARNING: Missing a blank line after declarations Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-18regulator: arizona-ldo1: Correct default regulator init_dataCharles Keepax
Both 5102 and 8997 have the regulator capable of supplying 1.8V, and the voltage step from the 5110 regulator is different from what is specified in the default description. This patch updates the default regulator description to match 5110 and selects the 1.8V capable description for 8997. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-03-18regulator: Add support for S2MPA01 regulatorSachin Kamat
Add support for S2MPA01 voltage and current regulator. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-13regulator: tps6586x: Remove unnecessary rdev[] arrayAxel Lin
Now we are using devm_regulator_register(), so we don't need the rdev[] array to store return value of devm_regulator_register. Use a *rdev variable is enough for checking return status. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-11regulator: da9063: fix assignment of da9063_reg_matches to NULLColin Ian King
cppcheck detected an incorrect assignment: drivers/regulator/da9063-regulator.c:711]: (warning) Assignment of function parameter has no effect outside the function the original code didn't do anything, instead, *da9063_reg_matches needs to be set to NULL. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-11regulator: add bcm590xx regulator driverMatt Porter
Add a regulator driver for the BCM590xx PMU voltage regulators. The driver supports LDOs and DCDCs in normal mode only. There is no support for low-power mode or power sequencing. Signed-off-by: Matt Porter <mporter@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-10regulator: act8865: Remove unnecessary *rdev[] from struct act8865Axel Lin
Now we are using devm_regulator_register(), so we don't need the *rdev[] array to store return value of devm_regulator_register. Use a *rdev variable is enough for checking return status. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Wenyou Yang <Wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-10regulator: max1586: Don't allocate memory for regulator_dev pointersKrzysztof Kozlowski
Do not allocate memory for 'struct regulator_dev *' since it was removed from state container (values returned by devm_regulator_register() are not used outside of probe). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-10regulator: max8998: Remove unnecessary **rdev from struct max8998_dataAxel Lin
Now we are using devm_regulator_register(), so we don't need to allocate *rdev[] array to store return value of devm_regulator_register. Use a *rdev variable is enough for checking return status. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-10regulator: max8997: Remove unnecessary **rdev from struct max8997_dataAxel Lin
Now we are using devm_regulator_register(), so we don't need to allocate *rdev[] array to store return value of devm_regulator_register. Use a *rdev variable is enough for checking return status. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-10regulator: max8660: Remove regulator_dev pointer from state containerKrzysztof Kozlowski
Don't store pointer to regulator_dev returned by devm_regulator_register() in state container. It isn't used anywhere outside of max8660_probe() function. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-10regulator: max8973: Remove unused field from 'struct max8973_chip'Krzysztof Kozlowski
The 'struct regulator_dev *rdev' of 'struct max8973_chip' isn't used anywhere in the driver so it can be removed safely. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-10regulator: max8952: Use managed regulator registrationKrzysztof Kozlowski
Use managed devm_regulator_register to simplify the driver probe and driver remove functions. This allows removing from state container the pointer to regulator_dev returned on registering the regulator. Patch also removes from state container pointer to 'struct device' as it is not used anywhere outside of max8952_pmic_probe() function. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-10regulator: max8925: Remove unused state container fieldsKrzysztof Kozlowski
Remove fields from 'struct max8925_regulator' which are not used anywhere in the driver. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>