diff options
-rw-r--r-- | Drivers/Net/Lan91xDxe/Lan91xDxe.c | 4470 | ||||
-rw-r--r-- | Drivers/Net/Lan91xDxe/Lan91xDxe.inf | 116 | ||||
-rw-r--r-- | Drivers/Net/Lan91xDxe/Lan91xDxeHw.h | 556 |
3 files changed, 2571 insertions, 2571 deletions
diff --git a/Drivers/Net/Lan91xDxe/Lan91xDxe.c b/Drivers/Net/Lan91xDxe/Lan91xDxe.c index 8c542fc..8895f58 100644 --- a/Drivers/Net/Lan91xDxe/Lan91xDxe.c +++ b/Drivers/Net/Lan91xDxe/Lan91xDxe.c @@ -1,2235 +1,2235 @@ -/** @file -* SMSC LAN91x series Network Controller Driver. -* -* Copyright (c) 2013 Linaro.org -* -* Derived from the LAN9118 driver. Original sources -* Copyright (c) 2012-2013, ARM Limited. All rights reserved. -* -* This program and the accompanying materials are licensed and -* made available under the terms and conditions of the BSD License -* which accompanies this distribution. The full text of the license -* may be found at: http://opensource.org/licenses/bsd-license.php -* -* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -* -**/ - -#include <Uefi.h> -#include <Uefi/UefiSpec.h> -#include <Base.h> - -// Protocols used by this driver -#include <Protocol/SimpleNetwork.h> -#include <Protocol/ComponentName2.h> -#include <Protocol/PxeBaseCode.h> -#include <Protocol/DevicePath.h> - -// Libraries used by this driver -#include <Library/UefiLib.h> -#include <Library/DebugLib.h> -#include <Library/UefiBootServicesTableLib.h> -#include <Library/MemoryAllocationLib.h> -#include <Library/IoLib.h> -#include <Library/PcdLib.h> -#include <Library/NetLib.h> -#include <Library/DevicePathLib.h> - -// Hardware register definitions -#include "Lan91xDxeHw.h" - -// Debugging output options -//#define LAN91X_PRINT_REGISTERS 1 -//#define LAN91X_PRINT_PACKET_HEADERS 1 -//#define LAN91X_PRINT_RECEIVE_FILTERS 1 - -// Chip power-down option -- UNTESTED -//#define LAN91X_POWER_DOWN 1 - -/*--------------------------------------------------------------------------------------------------------------------- - - LAN91x Information Structure - ----------------------------------------------------------------------------------------------------------------------*/ -typedef struct _LAN91X_DRIVER { - // Driver signature - UINT32 Signature; - EFI_HANDLE ControllerHandle; - - // EFI SNP protocol instances - EFI_SIMPLE_NETWORK_PROTOCOL Snp; - EFI_SIMPLE_NETWORK_MODE SnpMode; - - // EFI Snp statistics instance - EFI_NETWORK_STATISTICS Stats; - - // Transmit Buffer recycle queue - - LIST_ENTRY TransmitQueueHead; - - // Register access variables - UINTN IoBase; // I/O Base Address - UINT8 Revision; // Chip Revision Number - INT8 PhyAd; // Phy Address - UINT8 BankSel; // Currently selected register bank - -} LAN91X_DRIVER; - -#define LAN91X_NO_PHY (-1) // PhyAd value if PHY not detected - -#define LAN91X_SIGNATURE SIGNATURE_32('S', 'M', '9', '1') -#define INSTANCE_FROM_SNP_THIS(a) CR(a, LAN91X_DRIVER, Snp, LAN91X_SIGNATURE) - -#define LAN91X_STALL 2 -#define LAN91X_MEMORY_ALLOC_POLLS 100 // Max times to poll for memory allocation -#define LAN91X_PKT_OVERHEAD 6 // Overhead bytes in packet buffer - -// Synchronization TPLs -#define LAN91X_TPL TPL_CALLBACK - -// Most common CRC32 Polynomial for little endian machines -#define CRC_POLYNOMIAL 0xEDB88320 - - -typedef struct { - MAC_ADDR_DEVICE_PATH Lan91x; - EFI_DEVICE_PATH_PROTOCOL End; -} LAN91X_DEVICE_PATH; - -LAN91X_DEVICE_PATH Lan91xPathTemplate = { - { - { - MESSAGING_DEVICE_PATH, MSG_MAC_ADDR_DP, - { (UINT8) (sizeof(MAC_ADDR_DEVICE_PATH)), (UINT8) ((sizeof(MAC_ADDR_DEVICE_PATH)) >> 8) } - }, - { { 0 } }, - 0 - }, - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { sizeof(EFI_DEVICE_PATH_PROTOCOL), 0 } - } -}; - -// Chip ID numbers and name strings -#define CHIP_9192 3 -#define CHIP_9194 4 -#define CHIP_9195 5 -#define CHIP_9196 6 -#define CHIP_91100 7 -#define CHIP_91100FD 8 -#define CHIP_91111FD 9 - -STATIC CHAR16 CONST * CONST ChipIds[ 16 ] = { - NULL, NULL, NULL, - /* 3 */ L"SMC91C90/91C92", - /* 4 */ L"SMC91C94", - /* 5 */ L"SMC91C95", - /* 6 */ L"SMC91C96", - /* 7 */ L"SMC91C100", - /* 8 */ L"SMC91C100FD", - /* 9 */ L"SMC91C11xFD", - NULL, NULL, NULL, - NULL, NULL, NULL -}; - -/* ------------------ TxBuffer Queue structures ------------------- */ - -typedef struct { - VOID *Buf; - UINTN Length; -} MSK_SYSTEM_BUF; - -typedef struct { - UINTN Signature; - LIST_ENTRY Link; - MSK_SYSTEM_BUF SystemBuf; -} MSK_LINKED_SYSTEM_BUF; - -#define TX_MBUF_SIGNATURE SIGNATURE_32 ('t','x','m','b') - -/* ------------------ MAC Address Hash Calculations ------------------- */ - -/* -** Generate a hash value from a multicast address -** -** This uses the Ethernet standard CRC32 algorithm -** -** INFO USED: -** 1: http://en.wikipedia.org/wiki/Cyclic_redundancy_check -** -** 2: http://www.erg.abdn.ac.uk/~gorry/eg3567/dl-pages/crc.html -** -** 3: http://en.wikipedia.org/wiki/Computation_of_CRC -*/ -STATIC -UINT32 -MulticastHash ( - IN EFI_MAC_ADDRESS *Mac, - IN UINT32 AddrLen - ) -{ - UINT32 Iter; - UINT32 Remainder; - UINT32 Crc32; - UINT8 *Addr; - - // 0xFFFFFFFF is standard seed for Ethernet - Remainder = 0xFFFFFFFF; - - // Generate the remainder byte-by-byte (LSB first) - Addr = &Mac->Addr[0]; - while (AddrLen-- > 0) { - Remainder ^= *Addr++; - for (Iter = 0; Iter < 8; ++Iter) { - // Check if exponent is set - if ((Remainder & 1) != 0) { - Remainder = (Remainder >> 1) ^ CRC_POLYNOMIAL; - } else { - Remainder = (Remainder >> 1) ^ 0; - } - } - } - - // Reverse the bits of the remainder - Crc32 = 0; - for (Iter = 0; Iter < 32; ++Iter) { - Crc32 <<= 1; - Crc32 |= Remainder & 1; - Remainder >>= 1; - } - return Crc32; -} - - -/* ---------------- Banked Register Operations ------------------ */ - -// Select the proper I/O bank -STATIC -VOID -SelectIoBank ( - LAN91X_DRIVER *LanDriver, - UINTN Register - ) -{ - UINT8 Bank; - - Bank = RegisterToBank (Register); - - // Select the proper I/O bank - if (LanDriver->BankSel != Bank) { - MmioWrite16 (LanDriver->IoBase + LAN91X_BANK_OFFSET, Bank); - LanDriver->BankSel = Bank; - } -} - -// Read a 16-bit I/O-space register -STATIC -UINT16 -ReadIoReg16 ( - LAN91X_DRIVER *LanDriver, - UINTN Register - ) -{ - UINT8 Offset; - - // Select the proper I/O bank - SelectIoBank (LanDriver, Register); - - // Read the requested register - Offset = RegisterToOffset (Register); - return MmioRead16 (LanDriver->IoBase + Offset); -} - -// Write a 16-bit I/O-space register -STATIC -UINT16 -WriteIoReg16 ( - LAN91X_DRIVER *LanDriver, - UINTN Register, - UINT16 Value - ) -{ - UINT8 Offset; - - // Select the proper I/O bank - SelectIoBank (LanDriver, Register); - - // Write the requested register - Offset = RegisterToOffset (Register); - return MmioWrite16 (LanDriver->IoBase + Offset, Value); -} - -// Read an 8-bit I/O-space register -STATIC -UINT8 -ReadIoReg8 ( - LAN91X_DRIVER *LanDriver, - UINTN Register - ) -{ - UINT8 Offset; - - // Select the proper I/O bank - SelectIoBank (LanDriver, Register); - - // Read the requested register - Offset = RegisterToOffset (Register); - return MmioRead8 (LanDriver->IoBase + Offset); -} - -// Write an 8-bit I/O-space register -STATIC -UINT8 -WriteIoReg8 ( - LAN91X_DRIVER *LanDriver, - UINTN Register, - UINT8 Value - ) -{ - UINT8 Offset; - - // Select the proper I/O bank - SelectIoBank (LanDriver, Register); - - // Write the requested register - Offset = RegisterToOffset (Register); - return MmioWrite8 (LanDriver->IoBase + Offset, Value); -} - - -/* ---------------- MII/PHY Access Operations ------------------ */ - -#define LAN91X_MDIO_STALL 1 - -STATIC -VOID -MdioOutput ( - LAN91X_DRIVER *LanDriver, - UINTN Bits, - UINT32 Value - ) -{ - UINT16 MgmtReg; - UINT32 Mask; - - MgmtReg = ReadIoReg16 (LanDriver, LAN91X_MGMT); - MgmtReg &= ~MGMT_MCLK; - MgmtReg |= MGMT_MDOE; - - for (Mask = (1 << (Bits - 1)); Mask != 0; Mask >>= 1) { - if ((Value & Mask) != 0) { - MgmtReg |= MGMT_MDO; - } else { - MgmtReg &= ~MGMT_MDO; - } - - WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg); - gBS->Stall (LAN91X_MDIO_STALL); - WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg | MGMT_MCLK); - gBS->Stall (LAN91X_MDIO_STALL); - } -} -#define PHY_OUTPUT_TIME (2 * LAN91X_MDIO_STALL) - -STATIC -UINT32 -MdioInput ( - LAN91X_DRIVER *LanDriver, - UINTN Bits - ) -{ - UINT16 MgmtReg; - UINT32 Mask; - UINT32 Value; - - MgmtReg = ReadIoReg16 (LanDriver, LAN91X_MGMT); - MgmtReg &= ~(MGMT_MDOE | MGMT_MCLK | MGMT_MDO); - WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg); - - Value = 0; - for (Mask = (1 << (Bits - 1)); Mask != 0; Mask >>= 1) { - if ((ReadIoReg16 (LanDriver, LAN91X_MGMT) & MGMT_MDI) != 0) { - Value |= Mask; - } - - WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg); - gBS->Stall (LAN91X_MDIO_STALL); - WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg | MGMT_MCLK); - gBS->Stall (LAN91X_MDIO_STALL); - } - - return Value; -} -#define PHY_INPUT_TIME (2 * LAN91X_MDIO_STALL) - -STATIC -VOID -MdioIdle ( - LAN91X_DRIVER *LanDriver - ) -{ - UINT16 MgmtReg; - - MgmtReg = ReadIoReg16 (LanDriver, LAN91X_MGMT); - MgmtReg &= ~(MGMT_MDOE | MGMT_MCLK | MGMT_MDO); - WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg); -} - -// Write to a PHY register -STATIC -VOID -WritePhyReg16 ( - LAN91X_DRIVER *LanDriver, - UINTN RegAd, - UINT16 Value - ) -{ - // Bit-bang the MII Serial Frame write operation - MdioOutput (LanDriver, 32, 0xffffffff); // Send 32 Ones as a preamble - MdioOutput (LanDriver, 2, 0x01); // Send Start (01) - MdioOutput (LanDriver, 2, 0x01); // Send Write (01) - MdioOutput (LanDriver, 5, LanDriver->PhyAd); // Send PHYAD[4:0] - MdioOutput (LanDriver, 5, RegAd); // Send REGAD[4:0] - MdioOutput (LanDriver, 2, 0x02); // Send TurnAround (10) - MdioOutput (LanDriver, 16, Value); // Write 16 data bits - - // Idle the MDIO bus - MdioIdle (LanDriver); -} -// Calculate approximate time to write a PHY register in microseconds -#define PHY_WRITE_TIME ((32 + 2 + 2 + 5 + 5 + 2 + 16) * PHY_OUTPUT_TIME) - -// Read from a PHY register -STATIC -UINT16 -ReadPhyReg16 ( - LAN91X_DRIVER *LanDriver, - UINTN RegAd - ) -{ - UINT32 Value; - - // Bit-bang the MII Serial Frame read operation - MdioOutput (LanDriver, 32, 0xffffffff); // Send 32 Ones as a preamble - MdioOutput (LanDriver, 2, 0x01); // Send Start (01) - MdioOutput (LanDriver, 2, 0x02); // Send Read (10) - MdioOutput (LanDriver, 5, LanDriver->PhyAd); // Send PHYAD[4:0] - MdioOutput (LanDriver, 5, RegAd); // Send REGAD[4:0] - - (VOID) MdioInput (LanDriver, 2); // Discard TurnAround bits - Value = MdioInput (LanDriver, 16); // Read 16 data bits - - // Idle the MDIO bus - MdioIdle (LanDriver); - - return (Value & 0xffff); -} -// Calculate approximate time to read a PHY register in microseconds -#define PHY_READ_TIME (((32 + 2 + 2 + 5 + 5) * PHY_OUTPUT_TIME) + \ - ((2 + 16) * PHY_INPUT_TIME)) - - -/* ---------------- Debug Functions ------------------ */ - -#ifdef LAN91X_PRINT_REGISTERS -STATIC -VOID -PrintIoRegisters ( - IN LAN91X_DRIVER *LanDriver - ) -{ - UINTN Bank; - UINTN Offset; - UINT16 Value; - - DEBUG((EFI_D_ERROR, "\nLAN91x I/O Register Dump:\n")); - - // Print currrent bank select register - Value = MmioRead16 (LanDriver->IoBase + LAN91X_BANK_OFFSET); - DEBUG((EFI_D_ERROR, " BankSel: %d Bank Register %04x (%d)\n", - LanDriver->BankSel, Value, Value & 0x0007)); - - // Print all I/O registers - for (Offset = 0; Offset < 0x0e; Offset += 2) { - DEBUG((EFI_D_ERROR, " %02x:", Offset)); - for (Bank = 0; Bank <= 3; ++Bank) { - DEBUG((EFI_D_ERROR, " %04x", ReadIoReg16 (LanDriver, MakeRegister (Bank, Offset)))); - } - DEBUG((EFI_D_ERROR, "\n")); - } -} - -STATIC -VOID -PrintPhyRegisters ( - IN LAN91X_DRIVER *LanDriver - ) -{ - UINTN RegNum; - - DEBUG((EFI_D_ERROR, "\nLAN91x Phy %d Register Dump:\n", LanDriver->PhyAd)); - - // Print all Phy registers - for (RegNum = 0; RegNum <= 5; ++RegNum) { - DEBUG((EFI_D_ERROR, " %2d: %04x\n", - RegNum, - ReadPhyReg16 (LanDriver, RegNum) - )); - } - for (RegNum = 16; RegNum <= 20; ++RegNum) { - DEBUG((EFI_D_ERROR, " %2d: %04x\n", - RegNum, - ReadPhyReg16 (LanDriver, RegNum) - )); - } -} -#endif - -#if LAN91X_PRINT_PACKET_HEADERS -STATIC -VOID -PrintIpDgram ( - IN CONST VOID *DstMac, - IN CONST VOID *SrcMac, - IN CONST VOID *Proto, - IN CONST VOID *IpDgram - ) -{ - CONST UINT8 *Ptr; - UINT16 SrcPort; - UINT16 DstPort; - - Ptr = DstMac; - DEBUG((EFI_D_ERROR, " Dst: %02x-%02x-%02x", - Ptr[0], Ptr[1], Ptr[2])); - DEBUG((EFI_D_ERROR, "-%02x-%02x-%02x", - Ptr[3], Ptr[4], Ptr[5])); - - Ptr = SrcMac; - DEBUG((EFI_D_ERROR, " Src: %02x-%02x-%02x", - Ptr[0], Ptr[1], Ptr[2])); - DEBUG((EFI_D_ERROR, "-%02x-%02x-%02x", - Ptr[3], Ptr[4], Ptr[5])); - - Ptr = Proto; - DEBUG((EFI_D_ERROR, " Proto: %02x%02x\n", - Ptr[0], Ptr[1])); - - Ptr = IpDgram; - switch (Ptr[9]) { - case EFI_IP_PROTO_ICMP: - DEBUG((EFI_D_ERROR, " ICMP")); - break; - case EFI_IP_PROTO_TCP: - DEBUG((EFI_D_ERROR, " TCP")); - break; - case EFI_IP_PROTO_UDP: - DEBUG((EFI_D_ERROR, " UDP")); - break; - default: - DEBUG((EFI_D_ERROR, " IpProto %d\n", Ptr[9])); - return; - } - - DEBUG((EFI_D_ERROR, " SrcIp: %d.%d.%d.%d", - Ptr[12], Ptr[13], Ptr[14], Ptr[15])); - DEBUG((EFI_D_ERROR, " DstIp: %d.%d.%d.%d", - Ptr[16], Ptr[17], Ptr[18], Ptr[19])); - - SrcPort = (Ptr[20] << 8) | Ptr[21]; - DstPort = (Ptr[22] << 8) | Ptr[23]; - DEBUG((EFI_D_ERROR, " SrcPort: %d DstPort: %d\n", SrcPort, DstPort)); -} -#endif - - -/* ---------------- PHY Management Operations ----------------- */ - -STATIC -EFI_STATUS -PhyDetect ( - IN LAN91X_DRIVER *LanDriver - ) -{ - UINT16 PhyId1; - UINT16 PhyId2; - - for (LanDriver->PhyAd = 0x1f; LanDriver->PhyAd >= 0 ; --LanDriver->PhyAd) { - PhyId1 = ReadPhyReg16 (LanDriver, PHY_INDEX_ID1); - PhyId2 = ReadPhyReg16 (LanDriver, PHY_INDEX_ID2); - - if ((PhyId1 != 0x0000) && (PhyId1 != 0xffff) && - (PhyId2 != 0x0000) && (PhyId2 != 0xffff)) { - if ((PhyId1 == 0x0016) && ((PhyId2 & 0xfff0) == 0xf840)) { - DEBUG((EFI_D_ERROR, "LAN91x: PHY type LAN83C183 (LAN91C111 Internal)\n")); - } else if ((PhyId1 == 0x0282) && ((PhyId2 & 0xfff0) == 0x1c50)) { - DEBUG((EFI_D_ERROR, "LAN91x: PHY type LAN83C180\n")); - } else { - DEBUG((EFI_D_ERROR, "LAN91x: PHY id %04x:%04x\n", PhyId1, PhyId2)); - } - return EFI_SUCCESS; - } - } - - DEBUG((EFI_D_ERROR, "LAN91x: PHY detection failed\n")); - return EFI_NO_MEDIA; -} - - -// Check the Link Status and take appropriate action -STATIC -BOOLEAN -CheckLinkStatus ( - IN LAN91X_DRIVER *LanDriver - ) -{ - UINT16 PhyStatus; - - // Get the PHY Status - PhyStatus = ReadPhyReg16 (LanDriver, PHY_INDEX_BASIC_STATUS); - - return (PhyStatus & PHYSTS_LINK_STS) != 0; -} - - -// Do auto-negotiation -STATIC -EFI_STATUS -PhyAutoNegotiate ( - IN LAN91X_DRIVER *LanDriver - ) -{ - UINTN Retries; - UINT16 PhyControl; - UINT16 PhyStatus; - UINT16 PhyAdvert; - - // If there isn't a PHY, don't try to reset it - if (LanDriver->PhyAd == LAN91X_NO_PHY) { - return EFI_SUCCESS; - } - - // Next check that auto-negotiation is supported - PhyStatus = ReadPhyReg16 (LanDriver, PHY_INDEX_BASIC_STATUS); - if ((PhyStatus & PHYSTS_AUTO_CAP) == 0) { - return EFI_SUCCESS; - } - - // Translate capabilities to advertise - PhyAdvert = PHYANA_CSMA; - - if ((PhyStatus & PHYSTS_10BASET_HDPLX) != 0) { - PhyAdvert |= PHYANA_10BASET; - } - if ((PhyStatus & PHYSTS_10BASET_FDPLX) != 0) { - PhyAdvert |= PHYANA_10BASETFD; - } - if ((PhyStatus & PHYSTS_100BASETX_HDPLX) != 0) { - PhyAdvert |= PHYANA_100BASETX; - } - if ((PhyStatus & PHYSTS_100BASETX_FDPLX) != 0) { - PhyAdvert |= PHYANA_100BASETXFD; - } - if ((PhyStatus & PHYSTS_100BASE_T4) != 0) { - PhyAdvert |= PHYANA_100BASET4; - } - - // Set the capabilities to advertise - WritePhyReg16 (LanDriver, PHY_INDEX_AUTO_NEG_ADVERT, PhyAdvert); - (VOID) ReadPhyReg16 (LanDriver, PHY_INDEX_AUTO_NEG_ADVERT); - - // Restart Auto-Negotiation - PhyControl = ReadPhyReg16 (LanDriver, PHY_INDEX_BASIC_CTRL); - PhyControl &= ~(PHYCR_SPEED_SEL | PHYCR_DUPLEX_MODE); - PhyControl |= PHYCR_AUTO_EN | PHYCR_RST_AUTO; - WritePhyReg16 (LanDriver, PHY_INDEX_BASIC_CTRL, PhyControl); - - // Wait up to 2 seconds for the process to complete - Retries = 2000000 / (PHY_READ_TIME + 100); - while ((ReadPhyReg16 (LanDriver, PHY_INDEX_BASIC_STATUS) & PHYSTS_AUTO_COMP) == 0) { - if (--Retries == 0) { - DEBUG((EFI_D_ERROR, "LAN91x: PHY auto-negotiation timed-out\n")); - return EFI_TIMEOUT; - } - gBS->Stall (100); - } - - return EFI_SUCCESS; -} - - -// Perform PHY software reset -STATIC -EFI_STATUS -PhySoftReset ( - IN LAN91X_DRIVER *LanDriver - ) -{ - UINTN Retries; - - // If there isn't a PHY, don't try to reset it - if (LanDriver->PhyAd == LAN91X_NO_PHY) { - return EFI_SUCCESS; - } - - // Request a PHY reset - WritePhyReg16 (LanDriver, PHY_INDEX_BASIC_CTRL, PHYCR_RESET); - - // The internal PHY will reset within 50ms. Allow 100ms. - Retries = 100000 / (PHY_READ_TIME + 100); - while (ReadPhyReg16 (LanDriver, PHY_INDEX_BASIC_CTRL) & PHYCR_RESET) { - if (--Retries == 0) { - DEBUG((EFI_D_ERROR, "LAN91x: PHY reset timed-out\n")); - return EFI_TIMEOUT; - } - gBS->Stall (100); - } - - return EFI_SUCCESS; -} - - -/* ---------------- General Operations ----------------- */ - -STATIC -EFI_MAC_ADDRESS -GetCurrentMacAddress ( - IN LAN91X_DRIVER *LanDriver - ) -{ - UINTN RegNum; - UINT8 *Addr; - EFI_MAC_ADDRESS MacAddress; - - SetMem (&MacAddress, sizeof(MacAddress), 0); - - Addr = &MacAddress.Addr[0]; - for (RegNum = LAN91X_IAR0; RegNum <= LAN91X_IAR5; ++RegNum) { - *Addr = ReadIoReg8 (LanDriver, RegNum); - ++Addr; - } - - return MacAddress; -} - -STATIC -EFI_STATUS -SetCurrentMacAddress ( - IN LAN91X_DRIVER *LanDriver, - IN EFI_MAC_ADDRESS *MacAddress - ) -{ - UINTN RegNum; - UINT8 *Addr; - - Addr = &MacAddress->Addr[0]; - for (RegNum = LAN91X_IAR0; RegNum <= LAN91X_IAR5; ++RegNum) { - WriteIoReg8 (LanDriver, RegNum, *Addr); - ++Addr; - } - - return EFI_SUCCESS; -} - -STATIC -EFI_STATUS -MmuOperation ( - IN LAN91X_DRIVER *LanDriver, - IN UINTN MmuOp - ) -{ - UINTN Polls; - - WriteIoReg16 (LanDriver, LAN91X_MMUCR, MmuOp); - Polls = 100; - while ((ReadIoReg16 (LanDriver, LAN91X_MMUCR) & MMUCR_BUSY) != 0) { - if (--Polls == 0) { - DEBUG((EFI_D_ERROR, "LAN91x: MMU operation %04x timed-out\n", MmuOp)); - return EFI_TIMEOUT; - } - gBS->Stall (LAN91X_STALL); - } - - return EFI_SUCCESS; -} - -// Read bytes from the DATA register -STATIC -EFI_STATUS -ReadIoData ( - IN LAN91X_DRIVER *LanDriver, - IN VOID *Buffer, - IN UINTN BufLen - ) -{ - UINT8 *Ptr; - - Ptr = Buffer; - for (; BufLen > 0; --BufLen) { - *Ptr = ReadIoReg8 (LanDriver, LAN91X_DATA0); - ++Ptr; - } - - return EFI_SUCCESS; -} - -// Write bytes to the DATA register -STATIC -EFI_STATUS -WriteIoData ( - IN LAN91X_DRIVER *LanDriver, - IN VOID *Buffer, - IN UINTN BufLen - ) -{ - UINT8 *Ptr; - - Ptr = Buffer; - for (; BufLen > 0; --BufLen) { - WriteIoReg8 (LanDriver, LAN91X_DATA0, *Ptr); - ++Ptr; - } - - return EFI_SUCCESS; -} - -// Disable the interface -STATIC -EFI_STATUS -ChipDisable ( - IN LAN91X_DRIVER *LanDriver - ) -{ -#ifdef LAN91X_POWER_DOWN - UINT16 Val16; -#endif - - // Stop Rx and Tx operations - WriteIoReg16 (LanDriver, LAN91X_RCR, RCR_CLEAR); - WriteIoReg16 (LanDriver, LAN91X_TCR, TCR_CLEAR); - -#ifdef LAN91X_POWER_DOWN - // Power-down the chip - Val16 = ReadIoReg16 (LanDriver, LAN91X_CR); - Val16 &= ~CR_EPH_POWER_EN; - WriteIoReg16 (LanDriver, LAN91X_CR, Val16); -#endif - - return EFI_SUCCESS; -} - -// Enable the interface -STATIC -EFI_STATUS -ChipEnable ( - IN LAN91X_DRIVER *LanDriver - ) -{ -#ifdef LAN91X_POWER_DOWN - UINT16 Val16; - - // Power-up the chip - Val16 = ReadIoReg16 (LanDriver, LAN91X_CR); - Val16 |= CR_EPH_POWER_EN; - WriteIoReg16 (LanDriver, LAN91X_CR, Val16); - gBS->Stall (LAN91X_STALL); -#endif - - // Start Rx and Tx operations - WriteIoReg16 (LanDriver, LAN91X_TCR, TCR_DEFAULT); - WriteIoReg16 (LanDriver, LAN91X_RCR, RCR_DEFAULT); - - return EFI_SUCCESS; -} - - -// Perform software reset on the LAN91x -STATIC -EFI_STATUS -SoftReset ( - IN LAN91X_DRIVER *LanDriver - ) -{ - UINT16 Val16; - - // Issue the reset - WriteIoReg16 (LanDriver, LAN91X_RCR, RCR_SOFT_RST); - gBS->Stall (LAN91X_STALL); - WriteIoReg16 (LanDriver, LAN91X_RCR, RCR_CLEAR); - - // Set the configuration register - WriteIoReg16 (LanDriver, LAN91X_CR, CR_DEFAULT); - gBS->Stall (LAN91X_STALL); - - // Stop Rx and Tx - WriteIoReg16 (LanDriver, LAN91X_RCR, RCR_CLEAR); - WriteIoReg16 (LanDriver, LAN91X_TCR, TCR_CLEAR); - - // Initialize the Control Register - Val16 = ReadIoReg16 (LanDriver, LAN91X_CTR); - Val16 |= CTR_AUTO_REL; - WriteIoReg16 (LanDriver, LAN91X_CTR, Val16); - - // Reset the MMU - MmuOperation (LanDriver, MMUCR_OP_RESET_MMU); - - return EFI_SUCCESS; -} - -/* -** Probe() -** -** Validate that there is a LAN91x device. -** -*/ -STATIC -EFI_STATUS -Probe ( - IN LAN91X_DRIVER *LanDriver - ) -{ - UINT16 Bank; - UINT16 Val16; - CHAR16 CONST *ChipId; - UINTN ResetTime; - - // First check that the Bank Select register is valid - Bank = MmioRead16 (LanDriver->IoBase + LAN91X_BANK_OFFSET); - if ((Bank & 0xff00) != 0x3300) { - DEBUG((EFI_D_ERROR, "LAN91x: signature error: expecting 33xx, read %04x\n", Bank)); - return EFI_DEVICE_ERROR; - } - - // Try reading the revision register next - LanDriver->BankSel = 0xff; - Val16 = ReadIoReg16 (LanDriver, LAN91X_REV); - - Bank = MmioRead16 (LanDriver->IoBase + LAN91X_BANK_OFFSET); - if ((Bank & 0xff03) != 0x3303) { - DEBUG((EFI_D_ERROR, "LAN91x: signature error: expecting 33x3, read %04x\n", Bank)); - return EFI_DEVICE_ERROR; - } - - // Validate the revision register - if ((Val16 & 0xff00) != 0x3300) { - DEBUG((EFI_D_ERROR, "LAN91x: revision error: expecting 33xx, read %04x\n", Val16)); - return EFI_DEVICE_ERROR; - } - - ChipId = ChipIds[(Val16 >> 4) & 0x0f]; - if (ChipId == NULL) { - DEBUG((EFI_D_ERROR, "LAN91x: unrecognized revision: %04x\n", Val16)); - return EFI_DEVICE_ERROR; - } - DEBUG((EFI_D_ERROR, "LAN91x: detected chip %s rev %d\n", ChipId, Val16 & 0xf)); - LanDriver->Revision = Val16 & 0xff; - - // Reload from EEPROM to get the hardware MAC address - WriteIoReg16 (LanDriver, LAN91X_CTR, CTR_RESERVED | CTR_RELOAD); - ResetTime = 1000; - while ((ReadIoReg16 (LanDriver, LAN91X_CTR) & CTR_RELOAD) != 0) { - if (--ResetTime == 0) { - DEBUG((EFI_D_ERROR, "LAN91x: reload from EEPROM timed-out\n")); - WriteIoReg16 (LanDriver, LAN91X_CTR, CTR_RESERVED); - return EFI_DEVICE_ERROR; - } - gBS->Stall (LAN91X_STALL); - } - - // Read and save the Permanent MAC Address - LanDriver->SnpMode.PermanentAddress = GetCurrentMacAddress (LanDriver); - LanDriver->SnpMode.CurrentAddress = LanDriver->SnpMode.PermanentAddress; - DEBUG((EFI_D_ERROR, //EFI_D_NET | EFI_D_INFO, - "LAN91x: HW MAC Address: %02x-%02x-%02x-%02x-%02x-%02x\n", - LanDriver->SnpMode.PermanentAddress.Addr[0], - LanDriver->SnpMode.PermanentAddress.Addr[1], - LanDriver->SnpMode.PermanentAddress.Addr[2], - LanDriver->SnpMode.PermanentAddress.Addr[3], - LanDriver->SnpMode.PermanentAddress.Addr[4], - LanDriver->SnpMode.PermanentAddress.Addr[5] - )); - - // Reset the device - SoftReset (LanDriver); - - // Try to detect a PHY - if (LanDriver->Revision > (CHIP_91100 << 4)) { - PhyDetect (LanDriver); - } else { - LanDriver->PhyAd = LAN91X_NO_PHY; - } - - return EFI_SUCCESS; -} - - - - -/*------------------ Simple Network Driver entry point functions ------------------*/ - -// Refer to the Simple Network Protocol section (21.1) -// in the UEFI 2.3.1 Specification for documentation. - -#define ReturnUnlock(s) do { Status = (s); goto exit_unlock; } while(0) - - -/* -** UEFI Start() function -** -*/ -EFI_STATUS -EFIAPI -SnpStart ( - IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp - ) -{ - EFI_SIMPLE_NETWORK_MODE *Mode; - EFI_TPL SavedTpl; - EFI_STATUS Status; - - // Check Snp instance - if (Snp == NULL) { - return EFI_INVALID_PARAMETER; - } - - // Serialize access to data and registers - SavedTpl = gBS->RaiseTPL (LAN91X_TPL); - Mode = Snp->Mode; - - // Check state of the driver - switch (Mode->State) { - case EfiSimpleNetworkStopped: - break; - case EfiSimpleNetworkStarted: - case EfiSimpleNetworkInitialized: - DEBUG((EFI_D_WARN, "LAN91x: Driver already started\n")); - ReturnUnlock (EFI_ALREADY_STARTED); - default: - DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n", - (UINTN)Snp->Mode->State)); - ReturnUnlock (EFI_DEVICE_ERROR); - } - - - // Change state - Mode->State = EfiSimpleNetworkStarted; - Status = EFI_SUCCESS; - - // Restore TPL and return -exit_unlock: - gBS->RestoreTPL (SavedTpl); - return Status; -} - -/* -** UEFI Stop() function -** -*/ -EFI_STATUS -EFIAPI -SnpStop ( - IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp - ) -{ - LAN91X_DRIVER *LanDriver; - EFI_TPL SavedTpl; - EFI_STATUS Status; - - // Check Snp Instance - if (Snp == NULL) { - return EFI_INVALID_PARAMETER; - } - - // Serialize access to data and registers - SavedTpl = gBS->RaiseTPL (LAN91X_TPL); - - // Check state of the driver - switch (Snp->Mode->State) { - case EfiSimpleNetworkStarted: - case EfiSimpleNetworkInitialized: - break; - case EfiSimpleNetworkStopped: - DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n")); - ReturnUnlock (EFI_NOT_STARTED); - default: - DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n", - (UINTN)Snp->Mode->State)); - ReturnUnlock (EFI_DEVICE_ERROR); - } - - // Find the LanDriver structure - LanDriver = INSTANCE_FROM_SNP_THIS(Snp); - - // Stop the Tx and Rx - ChipDisable (LanDriver); - - // Change the state - Snp->Mode->State = EfiSimpleNetworkStopped; - Status = EFI_SUCCESS; - - // Restore TPL and return -exit_unlock: - gBS->RestoreTPL (SavedTpl); - return Status; -} - -/* -** UEFI Initialize() function -** -*/ -EFI_STATUS -EFIAPI -SnpInitialize ( - IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp, - IN UINTN RxBufferSize OPTIONAL, - IN UINTN TxBufferSize OPTIONAL - ) -{ - LAN91X_DRIVER *LanDriver; - EFI_TPL SavedTpl; - EFI_STATUS Status; - - // Check Snp Instance - if (Snp == NULL) { - return EFI_INVALID_PARAMETER; - } - - // Serialize access to data and registers - SavedTpl = gBS->RaiseTPL (LAN91X_TPL); - - // Check that driver was started but not initialised - switch (Snp->Mode->State) { - case EfiSimpleNetworkStarted: - break; - case EfiSimpleNetworkInitialized: - DEBUG((EFI_D_WARN, "LAN91x: Driver already initialized\n")); - ReturnUnlock (EFI_SUCCESS); - case EfiSimpleNetworkStopped: - DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n")); - ReturnUnlock (EFI_NOT_STARTED); - default: - DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n", - (UINTN)Snp->Mode->State)); - ReturnUnlock (EFI_DEVICE_ERROR); - } - - // Find the LanDriver structure - LanDriver = INSTANCE_FROM_SNP_THIS(Snp); - - // Initiate a software reset - Status = SoftReset (LanDriver); - if (EFI_ERROR(Status)) { - DEBUG((EFI_D_WARN, "LAN91x: Soft reset failed\n")); - ReturnUnlock (EFI_DEVICE_ERROR); - } - - // Initiate a PHY reset - if (PhySoftReset (LanDriver) < 0) { - Snp->Mode->State = EfiSimpleNetworkStopped; - DEBUG((EFI_D_WARN, "LAN91x: PHY soft reset timeout\n")); - ReturnUnlock (EFI_NOT_STARTED); - } - - // Do auto-negotiation - Status = PhyAutoNegotiate (LanDriver); - if (EFI_ERROR(Status)) { - DEBUG((EFI_D_WARN, "LAN91x: PHY auto-negotiation failed\n")); - } - - // Enable the receiver and transmitter - ChipEnable (LanDriver); - - // Now acknowledge all interrupts - WriteIoReg8 (LanDriver, LAN91X_IST, 0xFF); - - // Declare the driver as initialized - Snp->Mode->State = EfiSimpleNetworkInitialized; - Status = EFI_SUCCESS; - - // Restore TPL and return -exit_unlock: - gBS->RestoreTPL (SavedTpl); - return Status; -} - -/* -** UEFI Reset () function -** -*/ -EFI_STATUS -EFIAPI -SnpReset ( - IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp, - IN BOOLEAN Verification - ) -{ - LAN91X_DRIVER *LanDriver; - EFI_TPL SavedTpl; - EFI_STATUS Status; - - // Check Snp Instance - if (Snp == NULL) { - return EFI_INVALID_PARAMETER; - } - - // Serialize access to data and registers - SavedTpl = gBS->RaiseTPL (LAN91X_TPL); - - // Check that driver was started and initialised - switch (Snp->Mode->State) { - case EfiSimpleNetworkInitialized: - break; - case EfiSimpleNetworkStarted: - DEBUG((EFI_D_WARN, "LAN91x: Driver not yet initialized\n")); - ReturnUnlock (EFI_DEVICE_ERROR); - case EfiSimpleNetworkStopped: - DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n")); - ReturnUnlock (EFI_NOT_STARTED); - default: - DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n", - (UINTN)Snp->Mode->State)); - ReturnUnlock (EFI_DEVICE_ERROR); - } - - // Find the LanDriver structure - LanDriver = INSTANCE_FROM_SNP_THIS(Snp); - - // Initiate a software reset - if (EFI_ERROR (SoftReset (LanDriver))) { - DEBUG((EFI_D_WARN, "LAN91x: Soft reset failed\n")); - ReturnUnlock (EFI_DEVICE_ERROR); - } - - // Initiate a PHY reset - if (EFI_ERROR (PhySoftReset (LanDriver))) { - DEBUG((EFI_D_WARN, "LAN91x: PHY soft reset failed\n")); - ReturnUnlock (EFI_DEVICE_ERROR); - } - - // Enable the receiver and transmitter - Status = ChipEnable (LanDriver); - - // Restore TPL and return -exit_unlock: - gBS->RestoreTPL (SavedTpl); - return Status; -} - -/* -** UEFI Shutdown () function -** -*/ -EFI_STATUS -EFIAPI -SnpShutdown ( - IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp - ) -{ - LAN91X_DRIVER *LanDriver; - EFI_TPL SavedTpl; - EFI_STATUS Status; - - // Check Snp Instance - if (Snp == NULL) { - return EFI_INVALID_PARAMETER; - } - - // Serialize access to data and registers - SavedTpl = gBS->RaiseTPL (LAN91X_TPL); - - // First check that driver has already been initialized - switch (Snp->Mode->State) { - case EfiSimpleNetworkInitialized: - break; - case EfiSimpleNetworkStarted: - DEBUG((EFI_D_WARN, "LAN91x: Driver not yet initialized\n")); - ReturnUnlock (EFI_DEVICE_ERROR); - case EfiSimpleNetworkStopped: - DEBUG((EFI_D_WARN, "LAN91x: Driver in stopped state\n")); - ReturnUnlock (EFI_NOT_STARTED); - default: - DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n", - (UINTN)Snp->Mode->State)); - ReturnUnlock (EFI_DEVICE_ERROR); - } - - // Find the LanDriver structure - LanDriver = INSTANCE_FROM_SNP_THIS(Snp); - - // Disable the interface - Status = ChipDisable (LanDriver); - - // Restore TPL and return -exit_unlock: - gBS->RestoreTPL (SavedTpl); - return Status; -} - - -/* -** UEFI ReceiveFilters() function -** -*/ -EFI_STATUS -EFIAPI -SnpReceiveFilters ( - IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp, - IN UINT32 Enable, - IN UINT32 Disable, - IN BOOLEAN Reset, - IN UINTN NumMfilter OPTIONAL, - IN EFI_MAC_ADDRESS *Mfilter OPTIONAL - ) -{ -#define MCAST_HASH_BYTES 8 - - LAN91X_DRIVER *LanDriver; - EFI_SIMPLE_NETWORK_MODE *SnpMode; - EFI_TPL SavedTpl; - EFI_STATUS Status; - UINTN i; - UINT32 Crc; - UINT16 RcvCtrl; - UINT8 McastHash[MCAST_HASH_BYTES]; - - // Check Snp Instance - if (Snp == NULL) { - return EFI_INVALID_PARAMETER; - } - - // Serialize access to data and registers - SavedTpl = gBS->RaiseTPL (LAN91X_TPL); - - // First check that driver has already been initialized - switch (Snp->Mode->State) { - case EfiSimpleNetworkInitialized: - break; - case EfiSimpleNetworkStarted: - DEBUG((EFI_D_WARN, "LAN91x: Driver not yet initialized\n")); - ReturnUnlock (EFI_DEVICE_ERROR); - case EfiSimpleNetworkStopped: - DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n")); - ReturnUnlock (EFI_NOT_STARTED); - default: - DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n", - (UINTN)Snp->Mode->State)); - ReturnUnlock (EFI_DEVICE_ERROR); - } - - // Find the LanDriver structure - LanDriver = INSTANCE_FROM_SNP_THIS(Snp); - SnpMode = Snp->Mode; - -#ifdef LAN91X_PRINT_RECEIVE_FILTERS - DEBUG((EFI_D_ERROR, "LAN91x:SnpReceiveFilters()\n")); - DEBUG((EFI_D_ERROR, " Enable = %08x\n", Enable)); - DEBUG((EFI_D_ERROR, " Disable = %08x\n", Disable)); - DEBUG((EFI_D_ERROR, " Reset = %d\n", Reset)); - DEBUG((EFI_D_ERROR, " NumMfilter = %d\n", NumMfilter)); - for (i = 0; i < NumMfilter; ++i) { - DEBUG((EFI_D_ERROR, - " [%2d] = %02x-%02x-%02x-%02x-%02x-%02x\n", - i, - Mfilter[i].Addr[0], - Mfilter[i].Addr[1], - Mfilter[i].Addr[2], - Mfilter[i].Addr[3], - Mfilter[i].Addr[4], - Mfilter[i].Addr[5])); - } -#endif - - // Update the Multicast Hash registers - if (Reset) { - // Clear the hash table - SetMem (McastHash, MCAST_HASH_BYTES, 0); - SnpMode->MCastFilterCount = 0; - } else { - // Read the current hash table - for (i = 0; i < MCAST_HASH_BYTES; ++i) { - McastHash[i] = ReadIoReg8 (LanDriver, LAN91X_MT0 + i); - } - // Set the new additions - for (i = 0; i < NumMfilter; ++i) { - Crc = MulticastHash (&Mfilter[i], NET_ETHER_ADDR_LEN); - McastHash[(Crc >> 29) & 0x3] |= 1 << ((Crc >> 26) & 0x3); - } - SnpMode->MCastFilterCount = NumMfilter; - } - // If the hash registers need updating, write them - if (Reset || NumMfilter > 0) { - for (i = 0; i < MCAST_HASH_BYTES; ++i) { - WriteIoReg8 (LanDriver, LAN91X_MT0 + i, McastHash[i]); - } - } - - RcvCtrl = ReadIoReg16 (LanDriver, LAN91X_RCR); - if ((Enable & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS) != 0) { - RcvCtrl |= RCR_PRMS; - SnpMode->ReceiveFilterSetting |= EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS; - } - if ((Disable & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS) != 0) { - RcvCtrl &= ~RCR_PRMS; - SnpMode->ReceiveFilterSetting &= ~EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS; - } - - if ((Enable & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST) != 0) { - RcvCtrl |= RCR_ALMUL; - SnpMode->ReceiveFilterSetting |= EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST; - } - if ((Disable & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST) != 0) { - RcvCtrl &= ~RCR_ALMUL; - SnpMode->ReceiveFilterSetting &= ~EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST; - } - WriteIoReg16 (LanDriver, LAN91X_RCR, RcvCtrl); - - Status = SetCurrentMacAddress (LanDriver, &SnpMode->CurrentAddress); - - // Restore TPL and return -exit_unlock: - gBS->RestoreTPL (SavedTpl); - return Status; -} - -/* -** UEFI StationAddress() function -** -*/ -EFI_STATUS -EFIAPI -SnpStationAddress ( - IN EFI_SIMPLE_NETWORK_PROTOCOL *Snp, - IN BOOLEAN Reset, - IN EFI_MAC_ADDRESS *NewMac -) -{ - LAN91X_DRIVER *LanDriver; - EFI_TPL SavedTpl; - EFI_STATUS Status; - - // Check Snp instance - if (Snp == NULL) { - return EFI_INVALID_PARAMETER; - } - - // Serialize access to data and registers - SavedTpl = gBS->RaiseTPL (LAN91X_TPL); - - // Check that driver was started and initialised - switch (Snp->Mode->State) { - case EfiSimpleNetworkInitialized: - break; - case EfiSimpleNetworkStarted: - DEBUG((EFI_D_WARN, "LAN91x: Driver not yet initialized\n")); - ReturnUnlock (EFI_DEVICE_ERROR); - case EfiSimpleNetworkStopped: - DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n")); - ReturnUnlock (EFI_NOT_STARTED); - default: - DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n", - (UINTN)Snp->Mode->State)); - ReturnUnlock (EFI_DEVICE_ERROR); - } - - // Find the LanDriver structure - LanDriver = INSTANCE_FROM_SNP_THIS(Snp); - - if (Reset) { - Snp->Mode->CurrentAddress = Snp->Mode->PermanentAddress; - } else { - if (NewMac == NULL) { - ReturnUnlock (EFI_INVALID_PARAMETER); - } - Snp->Mode->CurrentAddress = *NewMac; - } - - Status = SetCurrentMacAddress (LanDriver, &Snp->Mode->CurrentAddress); - - // Restore TPL and return -exit_unlock: - gBS->RestoreTPL (SavedTpl); - return Status; -} - -/* -** UEFI Statistics() function -** -*/ -EFI_STATUS -EFIAPI -SnpStatistics ( - IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp, - IN BOOLEAN Reset, - IN OUT UINTN *StatSize, - OUT EFI_NETWORK_STATISTICS *Statistics - ) -{ - LAN91X_DRIVER *LanDriver; - EFI_TPL SavedTpl; - EFI_STATUS Status; - - // Check Snp instance - if (Snp == NULL) { - return EFI_INVALID_PARAMETER; - } - - // Check pointless condition - if ((!Reset) && (StatSize == NULL) && (Statistics == NULL)) { - return EFI_SUCCESS; - } - - // Check the parameters - if ((StatSize == NULL) && (Statistics != NULL)) { - return EFI_INVALID_PARAMETER; - } - - // Serialize access to data and registers - SavedTpl = gBS->RaiseTPL (LAN91X_TPL); - - // Check that driver was started and initialised - switch (Snp->Mode->State) { - case EfiSimpleNetworkInitialized: - break; - case EfiSimpleNetworkStarted: - DEBUG((EFI_D_WARN, "LAN91x: Driver not yet initialized\n")); - ReturnUnlock (EFI_DEVICE_ERROR); - case EfiSimpleNetworkStopped: - DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n")); - ReturnUnlock (EFI_NOT_STARTED); - default: - DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n", - (UINTN)Snp->Mode->State)); - ReturnUnlock (EFI_DEVICE_ERROR); - } - - // Find the LanDriver structure - LanDriver = INSTANCE_FROM_SNP_THIS(Snp); - - // Do a reset if required - if (Reset) { - ZeroMem (&LanDriver->Stats, sizeof(EFI_NETWORK_STATISTICS)); - } - - // Check buffer size - if (*StatSize < sizeof(EFI_NETWORK_STATISTICS)) { - *StatSize = sizeof(EFI_NETWORK_STATISTICS); - ReturnUnlock (EFI_BUFFER_TOO_SMALL); - goto exit_unlock; - } - - // Fill in the statistics - CopyMem(&Statistics, &LanDriver->Stats, sizeof(EFI_NETWORK_STATISTICS)); - Status = EFI_SUCCESS; - - // Restore TPL and return -exit_unlock: - gBS->RestoreTPL (SavedTpl); - return Status; -} - -/* -** UEFI MCastIPtoMAC() function -** -*/ -EFI_STATUS -EFIAPI -SnpMcastIptoMac ( - IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp, - IN BOOLEAN IsIpv6, - IN EFI_IP_ADDRESS *Ip, - OUT EFI_MAC_ADDRESS *McastMac - ) -{ - // Check Snp instance - if (Snp == NULL) { - return EFI_INVALID_PARAMETER; - } - - // Check parameters - if ((McastMac == NULL) || (Ip == NULL)) { - return EFI_INVALID_PARAMETER; - } - - // Make sure MAC address is empty - ZeroMem (McastMac, sizeof(EFI_MAC_ADDRESS)); - - // If we need ipv4 address - if (!IsIpv6) { - // Most significant 25 bits of a multicast HW address are set - McastMac->Addr[0] = 0x01; - McastMac->Addr[1] = 0x00; - McastMac->Addr[2] = 0x5E; - - // Lower 23 bits from ipv4 address - McastMac->Addr[3] = (Ip->v4.Addr[1] & 0x7F); // Clear the ms bit (25th bit of MAC must be 0) - McastMac->Addr[4] = Ip->v4.Addr[2]; - McastMac->Addr[5] = Ip->v4.Addr[3]; - } else { - // Most significant 16 bits of multicast v6 HW address are set - McastMac->Addr[0] = 0x33; - McastMac->Addr[1] = 0x33; - - // lower four octets are taken from ipv6 address - McastMac->Addr[2] = Ip->v6.Addr[8]; - McastMac->Addr[3] = Ip->v6.Addr[9]; - McastMac->Addr[4] = Ip->v6.Addr[10]; - McastMac->Addr[5] = Ip->v6.Addr[11]; - } - - return EFI_SUCCESS; -} - -/* -** UEFI NvData() function -** -*/ -EFI_STATUS -EFIAPI -SnpNvData ( - IN EFI_SIMPLE_NETWORK_PROTOCOL* pobj, - IN BOOLEAN read_write, - IN UINTN offset, - IN UINTN buff_size, - IN OUT VOID *data - ) -{ - DEBUG((EFI_D_ERROR, "LAN91x: Non-volatile storage not supported\n")); - - return EFI_UNSUPPORTED; -} - - -/* -** UEFI GetStatus () function -** -*/ -EFI_STATUS -EFIAPI -SnpGetStatus ( - IN EFI_SIMPLE_NETWORK_PROTOCOL *Snp, - OUT UINT32 *IrqStat OPTIONAL, - OUT VOID **TxBuff OPTIONAL - ) -{ - LAN91X_DRIVER *LanDriver; - EFI_TPL SavedTpl; - EFI_STATUS Status; - BOOLEAN MediaPresent; - UINT8 IstReg; - MSK_LINKED_SYSTEM_BUF *LinkedTXRecycleBuff; - - // Check preliminaries - if (Snp == NULL) { - return EFI_INVALID_PARAMETER; - } - - // Serialize access to data and registers - SavedTpl = gBS->RaiseTPL (LAN91X_TPL); - - // Check that driver was started and initialised - switch (Snp->Mode->State) { - case EfiSimpleNetworkInitialized: - break; - case EfiSimpleNetworkStarted: - DEBUG((EFI_D_WARN, "LAN91x: Driver not yet initialized\n")); - ReturnUnlock (EFI_DEVICE_ERROR); - case EfiSimpleNetworkStopped: - DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n")); - ReturnUnlock (EFI_NOT_STARTED); - default: - DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n", - (UINTN)Snp->Mode->State)); - ReturnUnlock (EFI_DEVICE_ERROR); - } - - // Find the LanDriver structure - LanDriver = INSTANCE_FROM_SNP_THIS(Snp); - - // Arbitrarily set the interrupt status to 0 - if (IrqStat != NULL) { - *IrqStat = 0; - IstReg = ReadIoReg8 (LanDriver, LAN91X_IST); - if ((IstReg & IST_RCV) != 0) { - *IrqStat |= EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT; - } - if ((IstReg & IST_TX) != 0) { - *IrqStat |= EFI_SIMPLE_NETWORK_TRANSMIT_INTERRUPT; - } - } - - // Pass back the completed buffer address - // The transmit buffer status is not read when TxBuf is NULL - if (TxBuff != NULL) { - *((UINT8 **) TxBuff) = (UINT8 *) 0; - if( !IsListEmpty (&LanDriver->TransmitQueueHead)) - { - LinkedTXRecycleBuff = CR (GetFirstNode (&LanDriver->TransmitQueueHead), MSK_LINKED_SYSTEM_BUF, Link, TX_MBUF_SIGNATURE); - if(LinkedTXRecycleBuff != NULL) { - *TxBuff = LinkedTXRecycleBuff->SystemBuf.Buf; - RemoveEntryList (&LinkedTXRecycleBuff->Link); - FreePool (LinkedTXRecycleBuff); - } - } - } - - // Update the media status - MediaPresent = CheckLinkStatus (LanDriver); - if (MediaPresent != Snp->Mode->MediaPresent) { - DEBUG((EFI_D_WARN, "LAN91x: Link %s\n", MediaPresent ? L"up" : L"down")); - } - Snp->Mode->MediaPresent = MediaPresent; - Status = EFI_SUCCESS; - - // Restore TPL and return -exit_unlock: - gBS->RestoreTPL (SavedTpl); - return Status; -} - - -/* -** UEFI Transmit() function -** -*/ -EFI_STATUS -EFIAPI -SnpTransmit ( - IN EFI_SIMPLE_NETWORK_PROTOCOL *Snp, - IN UINTN HdrSize, - IN UINTN BufSize, - IN VOID *BufAddr, - IN EFI_MAC_ADDRESS *SrcAddr OPTIONAL, - IN EFI_MAC_ADDRESS *DstAddr OPTIONAL, - IN UINT16 *Protocol OPTIONAL - ) -{ - LAN91X_DRIVER *LanDriver; - EFI_TPL SavedTpl; - EFI_STATUS Status; - UINT8 *Ptr; - UINTN Len; - UINTN MmuPages; - UINTN Retries; - UINT16 Proto; - UINT8 PktNum; - MSK_LINKED_SYSTEM_BUF *LinkedTXRecycleBuff; - - - // Check preliminaries - if ((Snp == NULL) || (BufAddr == NULL)) { - DEBUG((EFI_D_ERROR, "LAN91x: SnpTransmit(): NULL Snp (%p) or BufAddr (%p)\n", - Snp, BufAddr)); - return EFI_INVALID_PARAMETER; - } - - // Serialize access to data and registers - SavedTpl = gBS->RaiseTPL (LAN91X_TPL); - - // Check that driver was started and initialised - switch (Snp->Mode->State) { - case EfiSimpleNetworkInitialized: - break; - case EfiSimpleNetworkStarted: - DEBUG((EFI_D_WARN, "LAN91x: Driver not yet initialized\n")); - ReturnUnlock (EFI_DEVICE_ERROR); - case EfiSimpleNetworkStopped: - DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n")); - ReturnUnlock (EFI_NOT_STARTED); - default: - DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n", - (UINTN)Snp->Mode->State)); - ReturnUnlock (EFI_DEVICE_ERROR); - } - - // Find the LanDriver structure - LanDriver = INSTANCE_FROM_SNP_THIS(Snp); - - // Ensure header is correct size if non-zero - if (HdrSize != 0) { - if (HdrSize != Snp->Mode->MediaHeaderSize) { - DEBUG((EFI_D_ERROR, "LAN91x: SnpTransmit(): Invalid HdrSize %d\n", HdrSize)); - ReturnUnlock (EFI_INVALID_PARAMETER); - } - - if ((DstAddr == NULL) || (Protocol == NULL)) { - DEBUG((EFI_D_ERROR, "LAN91x: SnpTransmit(): NULL DstAddr %p or Protocol %p\n", - DstAddr, Protocol)); - ReturnUnlock (EFI_INVALID_PARAMETER); - } - } - - // Before transmitting check the link status - if (!Snp->Mode->MediaPresent) { - DEBUG((EFI_D_WARN, "LAN91x: SnpTransmit(): Link not ready\n")); - ReturnUnlock (EFI_NOT_READY); - } - - // Calculate the request size in 256-byte "pages" minus 1 - // The 91C111 ignores this, but some older devices need it. - MmuPages = ((BufSize & ~1) + LAN91X_PKT_OVERHEAD - 1) >> 8; - if (MmuPages > 7) { - DEBUG((EFI_D_WARN, "LAN91x: Tx buffer too large (%d bytes)\n", BufSize)); - LanDriver->Stats.TxOversizeFrames += 1; - LanDriver->Stats.TxDroppedFrames += 1; - ReturnUnlock (EFI_BAD_BUFFER_SIZE); - } - - // Request allocation of a transmit buffer - Status = MmuOperation (LanDriver, MMUCR_OP_TX_ALLOC | MmuPages); - if (EFI_ERROR (Status)) { - DEBUG((EFI_D_ERROR, "LAN91x: Tx buffer request failure: %d\n", Status)); - ReturnUnlock (EFI_DEVICE_ERROR); - } - - // Wait for allocation request completion - Retries = LAN91X_MEMORY_ALLOC_POLLS; - while ((ReadIoReg8 (LanDriver, LAN91X_IST) & IST_ALLOC) == 0) { - if (--Retries == 0) { - DEBUG((EFI_D_ERROR, "LAN91x: Tx buffer allocation timeout\n")); - ReturnUnlock (EFI_TIMEOUT); - } - } - - // Check for successful allocation - PktNum = ReadIoReg8 (LanDriver, LAN91X_ARR); - if ((PktNum & ARR_FAILED) != 0) { - DEBUG((EFI_D_ERROR, "LAN91x: Tx buffer allocation failure: %02x\n", PktNum)); - ReturnUnlock (EFI_NOT_READY); - } - PktNum &= ARR_PACKET; - - // Check for the nature of the frame - // If no destination address, it's ARP broadcast - if(DstAddr != NULL) - { - if (DstAddr->Addr[0] == 0xFF) { - LanDriver->Stats.TxBroadcastFrames += 1; - } else if ((DstAddr->Addr[0] & 0x1) == 1) { - LanDriver->Stats.TxMulticastFrames += 1; - } else { - LanDriver->Stats.TxUnicastFrames += 1; - } - } else { - LanDriver->Stats.TxBroadcastFrames += 1; - } - - // Set the Packet Number and Pointer registers - WriteIoReg8 (LanDriver, LAN91X_PNR, PktNum); - WriteIoReg16 (LanDriver, LAN91X_PTR, PTR_AUTO_INCR); - - // Set up mutable buffer information variables - Ptr = BufAddr; - Len = BufSize; - - // Write Status and Byte Count first - WriteIoReg16 (LanDriver, LAN91X_DATA0, 0); - WriteIoReg16 (LanDriver, LAN91X_DATA0, (Len + LAN91X_PKT_OVERHEAD) & BCW_COUNT); - - // This packet may come with a preconfigured Ethernet header. - // If not, we need to construct one from optional parameters. - if (HdrSize) { - - // Write the destination address - WriteIoData (LanDriver, DstAddr, NET_ETHER_ADDR_LEN); - - // Write the Source Address - if (SrcAddr != NULL) { - WriteIoData (LanDriver, SrcAddr, NET_ETHER_ADDR_LEN); - } else { - WriteIoData (LanDriver, &LanDriver->SnpMode.CurrentAddress, NET_ETHER_ADDR_LEN); - } - - // Write the Protocol word - Proto = HTONS (*Protocol); - WriteIoReg16 (LanDriver, LAN91X_DATA0, Proto); - - // Adjust the data start and length - Ptr += sizeof(ETHER_HEAD); - Len -= sizeof(ETHER_HEAD); - } - - // Copy the remainder data buffer, except the odd byte - WriteIoData (LanDriver, Ptr, Len & ~1); - Ptr += Len & ~1; - Len &= 1; - - // Write the Packet Control Word and odd byte - WriteIoReg16 (LanDriver, LAN91X_DATA0, - (Len != 0) ? (PCW_ODD | PCW_CRC | *Ptr) : PCW_CRC); - - // Release the packet for transmission - Status = MmuOperation (LanDriver, MMUCR_OP_TX_PUSH); - if (EFI_ERROR (Status)) { - DEBUG((EFI_D_ERROR, "LAN91x: Tx buffer release failure: %d\n", Status)); - ReturnUnlock (EFI_DEVICE_ERROR); - } - - // Update the Tx statistics - LanDriver->Stats.TxTotalBytes += BufSize; - LanDriver->Stats.TxGoodFrames += 1; - - // Update the Tx Buffer cache - LinkedTXRecycleBuff = AllocateZeroPool (sizeof (MSK_LINKED_SYSTEM_BUF)); - if (LinkedTXRecycleBuff == NULL) { - return EFI_OUT_OF_RESOURCES; - } - LinkedTXRecycleBuff->Signature = TX_MBUF_SIGNATURE; - // - // Add the passed Buffer to the transmit queue. Don't copy. - // - LinkedTXRecycleBuff->SystemBuf.Buf = BufAddr; - LinkedTXRecycleBuff->SystemBuf.Length = BufSize; - InsertTailList (&LanDriver->TransmitQueueHead, &LinkedTXRecycleBuff->Link); - - Status = EFI_SUCCESS; - - // Dump the packet header -#if LAN91X_PRINT_PACKET_HEADERS - Ptr = BufAddr; - DEBUG((EFI_D_ERROR, "LAN91X:SnpTransmit()\n")); - DEBUG((EFI_D_ERROR, " HdrSize: %d, SrcAddr: %p, Length: %d, Last byte: %02x\n", - HdrSize, SrcAddr, BufSize, Ptr[BufSize - 1])); - PrintIpDgram ( - (HdrSize == 0) ? (EFI_MAC_ADDRESS *)&Ptr[0] : DstAddr, - (HdrSize == 0) ? (EFI_MAC_ADDRESS *)&Ptr[6] : (SrcAddr != NULL) ? SrcAddr : &LanDriver->SnpMode.CurrentAddress, - (HdrSize == 0) ? (UINT16 *)&Ptr[12] : &Proto, - &Ptr[14] - ); -#endif - - // Restore TPL and return -exit_unlock: - gBS->RestoreTPL (SavedTpl); - return Status; -} - - -/* -** UEFI Receive() function -** -*/ -EFI_STATUS -EFIAPI -SnpReceive ( - IN EFI_SIMPLE_NETWORK_PROTOCOL *Snp, - OUT UINTN *HdrSize OPTIONAL, - IN OUT UINTN *BuffSize, - OUT VOID *Data, - OUT EFI_MAC_ADDRESS *SrcAddr OPTIONAL, - OUT EFI_MAC_ADDRESS *DstAddr OPTIONAL, - OUT UINT16 *Protocol OPTIONAL - ) -{ - EFI_TPL SavedTpl; - EFI_STATUS Status; - LAN91X_DRIVER *LanDriver; - UINT8 *DataPtr; - UINT16 PktStatus; - UINT16 PktLength; - UINT16 PktControl; - UINT8 IstReg; - - // Check preliminaries - if ((Snp == NULL) || (Data == NULL)) { - return EFI_INVALID_PARAMETER; - } - - // Serialize access to data and registers - SavedTpl = gBS->RaiseTPL (LAN91X_TPL); - - // Check that driver was started and initialised - switch (Snp->Mode->State) { - case EfiSimpleNetworkInitialized: - break; - case EfiSimpleNetworkStarted: - DEBUG((EFI_D_WARN, "LAN91x: Driver not yet initialized\n")); - ReturnUnlock (EFI_DEVICE_ERROR); - case EfiSimpleNetworkStopped: - DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n")); - ReturnUnlock (EFI_NOT_STARTED); - default: - DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n", - (UINTN)Snp->Mode->State)); - ReturnUnlock (EFI_DEVICE_ERROR); - } - - // Find the LanDriver structure - LanDriver = INSTANCE_FROM_SNP_THIS(Snp); - - // Check for Rx Overrun - IstReg = ReadIoReg8 (LanDriver, LAN91X_IST); - if ((IstReg & IST_RX_OVRN) != 0) { - LanDriver->Stats.RxTotalFrames += 1; - LanDriver->Stats.RxDroppedFrames += 1; - WriteIoReg8 (LanDriver, LAN91X_IST, IST_RX_OVRN); - DEBUG((EFI_D_WARN, "LAN91x: Receiver overrun\n")); - } - - // Check for Rx data available - if ((IstReg & IST_RCV) == 0) { - ReturnUnlock (EFI_NOT_READY); - } - - // Configure the PTR register for reading - WriteIoReg16 (LanDriver, LAN91X_PTR, PTR_RCV | PTR_AUTO_INCR | PTR_READ); - - // Read the Packet Status and Packet Length words - PktStatus = ReadIoReg16 (LanDriver, LAN91X_DATA0); - PktLength = ReadIoReg16 (LanDriver, LAN91X_DATA0) & BCW_COUNT; - - // Check for valid received packet - if ((PktStatus == 0) && (PktLength == 0)) { - DEBUG((EFI_D_WARN, "LAN91x: Received zero-length packet. IST=%04x\n", IstReg)); - ReturnUnlock (EFI_NOT_READY); - } - LanDriver->Stats.RxTotalFrames += 1; - - // Check if we got a CRC error - if ((PktStatus & RX_BAD_CRC) != 0) { - DEBUG((EFI_D_WARN, "LAN91x: Received frame CRC error\n")); - LanDriver->Stats.RxCrcErrorFrames += 1; - LanDriver->Stats.RxDroppedFrames += 1; - Status = EFI_DEVICE_ERROR; - goto exit_release; - } - - // Check if we got a too-short frame - if ((PktStatus & RX_TOO_SHORT) != 0) { - DEBUG((EFI_D_WARN, "LAN91x: Received frame too short (%d bytes)\n", PktLength)); - LanDriver->Stats.RxUndersizeFrames += 1; - LanDriver->Stats.RxDroppedFrames += 1; - Status = EFI_DEVICE_ERROR; - goto exit_release; - } - - // Check if we got a too-long frame - if ((PktStatus & RX_TOO_LONG) != 0) { - DEBUG((EFI_D_WARN, "LAN91x: Received frame too long (%d bytes)\n", PktLength)); - LanDriver->Stats.RxOversizeFrames += 1; - LanDriver->Stats.RxDroppedFrames += 1; - Status = EFI_DEVICE_ERROR; - goto exit_release; - } - - // Check if we got an alignment error - if ((PktStatus & RX_ALGN_ERR) != 0) { - DEBUG((EFI_D_WARN, "LAN91x: Received frame alignment error\n")); - // Don't seem to keep track of these specifically - LanDriver->Stats.RxDroppedFrames += 1; - Status = EFI_DEVICE_ERROR; - goto exit_release; - } - - // Classify the received fram - if ((PktStatus & RX_MULTICAST) != 0) { - LanDriver->Stats.RxMulticastFrames += 1; - } else if ((PktStatus & RX_BROADCAST) != 0) { - LanDriver->Stats.RxBroadcastFrames += 1; - } else { - LanDriver->Stats.RxUnicastFrames += 1; - } - - // Calculate the received packet data length - PktLength -= LAN91X_PKT_OVERHEAD; - if ((PktStatus & RX_ODD_FRAME) != 0) { - PktLength += 1; - } - - // Check buffer size - if (*BuffSize < PktLength) { - DEBUG((EFI_D_WARN, "LAN91x: Receive buffer too small for packet (%d < %d)\n", - *BuffSize, PktLength)); - *BuffSize = PktLength; - Status = EFI_BUFFER_TOO_SMALL; - goto exit_release; - } - - // Transfer the data bytes - DataPtr = Data; - ReadIoData (LanDriver, DataPtr, PktLength & ~0x0001); - - // Read the PktControl and Odd Byte from the FIFO - PktControl = ReadIoReg16 (LanDriver, LAN91X_DATA0); - if ((PktControl & PCW_ODD) != 0) { - DataPtr[PktLength - 1] = PktControl & PCW_ODD_BYTE; - } - - // Update buffer size - *BuffSize = PktLength; - - if (HdrSize != NULL) { - *HdrSize = LanDriver->SnpMode.MediaHeaderSize; - } - - // Extract the destination address - if (DstAddr != NULL) { - CopyMem (DstAddr, &DataPtr[0], NET_ETHER_ADDR_LEN); - } - - // Get the source address - if (SrcAddr != NULL) { - CopyMem (SrcAddr, &DataPtr[6], NET_ETHER_ADDR_LEN); - } - - // Get the protocol - if (Protocol != NULL) { - *Protocol = NTOHS (*(UINT16*)(&DataPtr[12])); - } - - // Update the Rx statistics - LanDriver->Stats.RxTotalBytes += PktLength; - LanDriver->Stats.RxGoodFrames += 1; - Status = EFI_SUCCESS; - -#if LAN91X_PRINT_PACKET_HEADERS - // Dump the packet header - DEBUG((EFI_D_ERROR, "LAN91X:SnpReceive()\n")); - DEBUG((EFI_D_ERROR, " HdrSize: %p, SrcAddr: %p, DstAddr: %p, Protocol: %p\n", - HdrSize, SrcAddr, DstAddr, Protocol)); - DEBUG((EFI_D_ERROR, " Length: %d, Last byte: %02x\n", PktLength, DataPtr[PktLength - 1])); - PrintIpDgram (&DataPtr[0], &DataPtr[6], &DataPtr[12], &DataPtr[14]); -#endif - - // Release the FIFO buffer -exit_release: - MmuOperation (LanDriver, MMUCR_OP_RX_POP_REL); - - // Restore TPL and return -exit_unlock: - gBS->RestoreTPL (SavedTpl); - return Status; -} - - -/*------------------ Driver Execution Environment main entry point ------------------*/ - -/* -** Entry point for the LAN91x driver -** -*/ -EFI_STATUS -Lan91xDxeEntry ( - IN EFI_HANDLE Handle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_STATUS Status; - LAN91X_DRIVER *LanDriver; - EFI_SIMPLE_NETWORK_PROTOCOL *Snp; - EFI_SIMPLE_NETWORK_MODE *SnpMode; - LAN91X_DEVICE_PATH *Lan91xPath; - - // The PcdLan91xDxeBaseAddress PCD must be defined - ASSERT(PcdGet32 (PcdLan91xDxeBaseAddress) != 0); - - // Allocate Resources - LanDriver = AllocateZeroPool (sizeof(LAN91X_DRIVER)); - Lan91xPath = AllocateCopyPool (sizeof(LAN91X_DEVICE_PATH), &Lan91xPathTemplate); - - // Initialize I/O Space access info - LanDriver->IoBase = PcdGet32 (PcdLan91xDxeBaseAddress); - LanDriver->PhyAd = LAN91X_NO_PHY; - LanDriver->BankSel = 0xff; - - // Initialize pointers - Snp = &(LanDriver->Snp); - SnpMode = &(LanDriver->SnpMode); - Snp->Mode = SnpMode; - - // Set the signature of the LAN Driver structure - LanDriver->Signature = LAN91X_SIGNATURE; - - // Probe the device - Status = Probe (LanDriver); - if (EFI_ERROR(Status)) { - DEBUG((EFI_D_ERROR, "LAN91x:Lan91xDxeEntry(): Probe failed with status %d\n", Status)); - return Status; - } - -#ifdef LAN91X_PRINT_REGISTERS - PrintIoRegisters (LanDriver); - PrintPhyRegisters (LanDriver); -#endif - - // Initialize transmit queue - InitializeListHead (&LanDriver->TransmitQueueHead); - - // Assign fields and func pointers - Snp->Revision = EFI_SIMPLE_NETWORK_PROTOCOL_REVISION; - Snp->WaitForPacket = NULL; - Snp->Initialize = SnpInitialize; - Snp->Start = SnpStart; - Snp->Stop = SnpStop; - Snp->Reset = SnpReset; - Snp->Shutdown = SnpShutdown; - Snp->ReceiveFilters = SnpReceiveFilters; - Snp->StationAddress = SnpStationAddress; - Snp->Statistics = SnpStatistics; - Snp->MCastIpToMac = SnpMcastIptoMac; - Snp->NvData = SnpNvData; - Snp->GetStatus = SnpGetStatus; - Snp->Transmit = SnpTransmit; - Snp->Receive = SnpReceive; - - // Fill in simple network mode structure - SnpMode->State = EfiSimpleNetworkStopped; - SnpMode->HwAddressSize = NET_ETHER_ADDR_LEN; // HW address is 6 bytes - SnpMode->MediaHeaderSize = sizeof(ETHER_HEAD); // Size of an Ethernet header - SnpMode->MaxPacketSize = EFI_PAGE_SIZE; // Ethernet Frame (with VLAN tag +4 bytes) - - // Supported receive filters - SnpMode->ReceiveFilterMask = EFI_SIMPLE_NETWORK_RECEIVE_UNICAST | - EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST | - EFI_SIMPLE_NETWORK_RECEIVE_BROADCAST | - EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS | - EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST; - - // Initially-enabled receive filters - SnpMode->ReceiveFilterSetting = EFI_SIMPLE_NETWORK_RECEIVE_UNICAST | - EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST | - EFI_SIMPLE_NETWORK_RECEIVE_BROADCAST; - - // LAN91x has 64bit hash table. We can filter an infinite MACs, but - // higher-level software must filter out any hash collisions. - SnpMode->MaxMCastFilterCount = MAX_MCAST_FILTER_CNT; - SnpMode->MCastFilterCount = 0; - ZeroMem (&SnpMode->MCastFilter, MAX_MCAST_FILTER_CNT * sizeof(EFI_MAC_ADDRESS)); - - // Set the interface type (1: Ethernet or 6: IEEE 802 Networks) - SnpMode->IfType = NET_IFTYPE_ETHERNET; - - // Mac address is changeable - SnpMode->MacAddressChangeable = TRUE; - - // We can only transmit one packet at a time - SnpMode->MultipleTxSupported = FALSE; - - // MediaPresent checks for cable connection and partner link - SnpMode->MediaPresentSupported = TRUE; - SnpMode->MediaPresent = FALSE; - - // Set broadcast address - SetMem (&SnpMode->BroadcastAddress, sizeof (EFI_MAC_ADDRESS), 0xFF); - - // Assign fields for device path - Lan91xPath->Lan91x.MacAddress = SnpMode->PermanentAddress; - Lan91xPath->Lan91x.IfType = SnpMode->IfType; - - // Initialise the protocol - Status = gBS->InstallMultipleProtocolInterfaces ( - &LanDriver->ControllerHandle, - &gEfiSimpleNetworkProtocolGuid, Snp, - &gEfiDevicePathProtocolGuid, Lan91xPath, - NULL - ); - - // Say what the status of loading the protocol structure is - if (EFI_ERROR(Status)) { - FreePool (LanDriver); - } - - return Status; -} +/** @file
+* SMSC LAN91x series Network Controller Driver.
+*
+* Copyright (c) 2013 Linaro.org
+*
+* Derived from the LAN9118 driver. Original sources
+* Copyright (c) 2012-2013, ARM Limited. All rights reserved.
+*
+* This program and the accompanying materials are licensed and
+* made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license
+* may be found at: http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Uefi.h>
+#include <Uefi/UefiSpec.h>
+#include <Base.h>
+
+// Protocols used by this driver
+#include <Protocol/SimpleNetwork.h>
+#include <Protocol/ComponentName2.h>
+#include <Protocol/PxeBaseCode.h>
+#include <Protocol/DevicePath.h>
+
+// Libraries used by this driver
+#include <Library/UefiLib.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/NetLib.h>
+#include <Library/DevicePathLib.h>
+
+// Hardware register definitions
+#include "Lan91xDxeHw.h"
+
+// Debugging output options
+//#define LAN91X_PRINT_REGISTERS 1
+//#define LAN91X_PRINT_PACKET_HEADERS 1
+//#define LAN91X_PRINT_RECEIVE_FILTERS 1
+
+// Chip power-down option -- UNTESTED
+//#define LAN91X_POWER_DOWN 1
+
+/*---------------------------------------------------------------------------------------------------------------------
+
+ LAN91x Information Structure
+
+---------------------------------------------------------------------------------------------------------------------*/
+typedef struct _LAN91X_DRIVER {
+ // Driver signature
+ UINT32 Signature;
+ EFI_HANDLE ControllerHandle;
+
+ // EFI SNP protocol instances
+ EFI_SIMPLE_NETWORK_PROTOCOL Snp;
+ EFI_SIMPLE_NETWORK_MODE SnpMode;
+
+ // EFI Snp statistics instance
+ EFI_NETWORK_STATISTICS Stats;
+
+ // Transmit Buffer recycle queue
+
+ LIST_ENTRY TransmitQueueHead;
+
+ // Register access variables
+ UINTN IoBase; // I/O Base Address
+ UINT8 Revision; // Chip Revision Number
+ INT8 PhyAd; // Phy Address
+ UINT8 BankSel; // Currently selected register bank
+
+} LAN91X_DRIVER;
+
+#define LAN91X_NO_PHY (-1) // PhyAd value if PHY not detected
+
+#define LAN91X_SIGNATURE SIGNATURE_32('S', 'M', '9', '1')
+#define INSTANCE_FROM_SNP_THIS(a) CR(a, LAN91X_DRIVER, Snp, LAN91X_SIGNATURE)
+
+#define LAN91X_STALL 2
+#define LAN91X_MEMORY_ALLOC_POLLS 100 // Max times to poll for memory allocation
+#define LAN91X_PKT_OVERHEAD 6 // Overhead bytes in packet buffer
+
+// Synchronization TPLs
+#define LAN91X_TPL TPL_CALLBACK
+
+// Most common CRC32 Polynomial for little endian machines
+#define CRC_POLYNOMIAL 0xEDB88320
+
+
+typedef struct {
+ MAC_ADDR_DEVICE_PATH Lan91x;
+ EFI_DEVICE_PATH_PROTOCOL End;
+} LAN91X_DEVICE_PATH;
+
+LAN91X_DEVICE_PATH Lan91xPathTemplate = {
+ {
+ {
+ MESSAGING_DEVICE_PATH, MSG_MAC_ADDR_DP,
+ { (UINT8) (sizeof(MAC_ADDR_DEVICE_PATH)), (UINT8) ((sizeof(MAC_ADDR_DEVICE_PATH)) >> 8) }
+ },
+ { { 0 } },
+ 0
+ },
+ {
+ END_DEVICE_PATH_TYPE,
+ END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ { sizeof(EFI_DEVICE_PATH_PROTOCOL), 0 }
+ }
+};
+
+// Chip ID numbers and name strings
+#define CHIP_9192 3
+#define CHIP_9194 4
+#define CHIP_9195 5
+#define CHIP_9196 6
+#define CHIP_91100 7
+#define CHIP_91100FD 8
+#define CHIP_91111FD 9
+
+STATIC CHAR16 CONST * CONST ChipIds[ 16 ] = {
+ NULL, NULL, NULL,
+ /* 3 */ L"SMC91C90/91C92",
+ /* 4 */ L"SMC91C94",
+ /* 5 */ L"SMC91C95",
+ /* 6 */ L"SMC91C96",
+ /* 7 */ L"SMC91C100",
+ /* 8 */ L"SMC91C100FD",
+ /* 9 */ L"SMC91C11xFD",
+ NULL, NULL, NULL,
+ NULL, NULL, NULL
+};
+
+/* ------------------ TxBuffer Queue structures ------------------- */
+
+typedef struct {
+ VOID *Buf;
+ UINTN Length;
+} MSK_SYSTEM_BUF;
+
+typedef struct {
+ UINTN Signature;
+ LIST_ENTRY Link;
+ MSK_SYSTEM_BUF SystemBuf;
+} MSK_LINKED_SYSTEM_BUF;
+
+#define TX_MBUF_SIGNATURE SIGNATURE_32 ('t','x','m','b')
+
+/* ------------------ MAC Address Hash Calculations ------------------- */
+
+/*
+** Generate a hash value from a multicast address
+**
+** This uses the Ethernet standard CRC32 algorithm
+**
+** INFO USED:
+** 1: http://en.wikipedia.org/wiki/Cyclic_redundancy_check
+**
+** 2: http://www.erg.abdn.ac.uk/~gorry/eg3567/dl-pages/crc.html
+**
+** 3: http://en.wikipedia.org/wiki/Computation_of_CRC
+*/
+STATIC
+UINT32
+MulticastHash (
+ IN EFI_MAC_ADDRESS *Mac,
+ IN UINT32 AddrLen
+ )
+{
+ UINT32 Iter;
+ UINT32 Remainder;
+ UINT32 Crc32;
+ UINT8 *Addr;
+
+ // 0xFFFFFFFF is standard seed for Ethernet
+ Remainder = 0xFFFFFFFF;
+
+ // Generate the remainder byte-by-byte (LSB first)
+ Addr = &Mac->Addr[0];
+ while (AddrLen-- > 0) {
+ Remainder ^= *Addr++;
+ for (Iter = 0; Iter < 8; ++Iter) {
+ // Check if exponent is set
+ if ((Remainder & 1) != 0) {
+ Remainder = (Remainder >> 1) ^ CRC_POLYNOMIAL;
+ } else {
+ Remainder = (Remainder >> 1) ^ 0;
+ }
+ }
+ }
+
+ // Reverse the bits of the remainder
+ Crc32 = 0;
+ for (Iter = 0; Iter < 32; ++Iter) {
+ Crc32 <<= 1;
+ Crc32 |= Remainder & 1;
+ Remainder >>= 1;
+ }
+ return Crc32;
+}
+
+
+/* ---------------- Banked Register Operations ------------------ */
+
+// Select the proper I/O bank
+STATIC
+VOID
+SelectIoBank (
+ LAN91X_DRIVER *LanDriver,
+ UINTN Register
+ )
+{
+ UINT8 Bank;
+
+ Bank = RegisterToBank (Register);
+
+ // Select the proper I/O bank
+ if (LanDriver->BankSel != Bank) {
+ MmioWrite16 (LanDriver->IoBase + LAN91X_BANK_OFFSET, Bank);
+ LanDriver->BankSel = Bank;
+ }
+}
+
+// Read a 16-bit I/O-space register
+STATIC
+UINT16
+ReadIoReg16 (
+ LAN91X_DRIVER *LanDriver,
+ UINTN Register
+ )
+{
+ UINT8 Offset;
+
+ // Select the proper I/O bank
+ SelectIoBank (LanDriver, Register);
+
+ // Read the requested register
+ Offset = RegisterToOffset (Register);
+ return MmioRead16 (LanDriver->IoBase + Offset);
+}
+
+// Write a 16-bit I/O-space register
+STATIC
+UINT16
+WriteIoReg16 (
+ LAN91X_DRIVER *LanDriver,
+ UINTN Register,
+ UINT16 Value
+ )
+{
+ UINT8 Offset;
+
+ // Select the proper I/O bank
+ SelectIoBank (LanDriver, Register);
+
+ // Write the requested register
+ Offset = RegisterToOffset (Register);
+ return MmioWrite16 (LanDriver->IoBase + Offset, Value);
+}
+
+// Read an 8-bit I/O-space register
+STATIC
+UINT8
+ReadIoReg8 (
+ LAN91X_DRIVER *LanDriver,
+ UINTN Register
+ )
+{
+ UINT8 Offset;
+
+ // Select the proper I/O bank
+ SelectIoBank (LanDriver, Register);
+
+ // Read the requested register
+ Offset = RegisterToOffset (Register);
+ return MmioRead8 (LanDriver->IoBase + Offset);
+}
+
+// Write an 8-bit I/O-space register
+STATIC
+UINT8
+WriteIoReg8 (
+ LAN91X_DRIVER *LanDriver,
+ UINTN Register,
+ UINT8 Value
+ )
+{
+ UINT8 Offset;
+
+ // Select the proper I/O bank
+ SelectIoBank (LanDriver, Register);
+
+ // Write the requested register
+ Offset = RegisterToOffset (Register);
+ return MmioWrite8 (LanDriver->IoBase + Offset, Value);
+}
+
+
+/* ---------------- MII/PHY Access Operations ------------------ */
+
+#define LAN91X_MDIO_STALL 1
+
+STATIC
+VOID
+MdioOutput (
+ LAN91X_DRIVER *LanDriver,
+ UINTN Bits,
+ UINT32 Value
+ )
+{
+ UINT16 MgmtReg;
+ UINT32 Mask;
+
+ MgmtReg = ReadIoReg16 (LanDriver, LAN91X_MGMT);
+ MgmtReg &= ~MGMT_MCLK;
+ MgmtReg |= MGMT_MDOE;
+
+ for (Mask = (1 << (Bits - 1)); Mask != 0; Mask >>= 1) {
+ if ((Value & Mask) != 0) {
+ MgmtReg |= MGMT_MDO;
+ } else {
+ MgmtReg &= ~MGMT_MDO;
+ }
+
+ WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg);
+ gBS->Stall (LAN91X_MDIO_STALL);
+ WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg | MGMT_MCLK);
+ gBS->Stall (LAN91X_MDIO_STALL);
+ }
+}
+#define PHY_OUTPUT_TIME (2 * LAN91X_MDIO_STALL)
+
+STATIC
+UINT32
+MdioInput (
+ LAN91X_DRIVER *LanDriver,
+ UINTN Bits
+ )
+{
+ UINT16 MgmtReg;
+ UINT32 Mask;
+ UINT32 Value;
+
+ MgmtReg = ReadIoReg16 (LanDriver, LAN91X_MGMT);
+ MgmtReg &= ~(MGMT_MDOE | MGMT_MCLK | MGMT_MDO);
+ WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg);
+
+ Value = 0;
+ for (Mask = (1 << (Bits - 1)); Mask != 0; Mask >>= 1) {
+ if ((ReadIoReg16 (LanDriver, LAN91X_MGMT) & MGMT_MDI) != 0) {
+ Value |= Mask;
+ }
+
+ WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg);
+ gBS->Stall (LAN91X_MDIO_STALL);
+ WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg | MGMT_MCLK);
+ gBS->Stall (LAN91X_MDIO_STALL);
+ }
+
+ return Value;
+}
+#define PHY_INPUT_TIME (2 * LAN91X_MDIO_STALL)
+
+STATIC
+VOID
+MdioIdle (
+ LAN91X_DRIVER *LanDriver
+ )
+{
+ UINT16 MgmtReg;
+
+ MgmtReg = ReadIoReg16 (LanDriver, LAN91X_MGMT);
+ MgmtReg &= ~(MGMT_MDOE | MGMT_MCLK | MGMT_MDO);
+ WriteIoReg16 (LanDriver, LAN91X_MGMT, MgmtReg);
+}
+
+// Write to a PHY register
+STATIC
+VOID
+WritePhyReg16 (
+ LAN91X_DRIVER *LanDriver,
+ UINTN RegAd,
+ UINT16 Value
+ )
+{
+ // Bit-bang the MII Serial Frame write operation
+ MdioOutput (LanDriver, 32, 0xffffffff); // Send 32 Ones as a preamble
+ MdioOutput (LanDriver, 2, 0x01); // Send Start (01)
+ MdioOutput (LanDriver, 2, 0x01); // Send Write (01)
+ MdioOutput (LanDriver, 5, LanDriver->PhyAd); // Send PHYAD[4:0]
+ MdioOutput (LanDriver, 5, RegAd); // Send REGAD[4:0]
+ MdioOutput (LanDriver, 2, 0x02); // Send TurnAround (10)
+ MdioOutput (LanDriver, 16, Value); // Write 16 data bits
+
+ // Idle the MDIO bus
+ MdioIdle (LanDriver);
+}
+// Calculate approximate time to write a PHY register in microseconds
+#define PHY_WRITE_TIME ((32 + 2 + 2 + 5 + 5 + 2 + 16) * PHY_OUTPUT_TIME)
+
+// Read from a PHY register
+STATIC
+UINT16
+ReadPhyReg16 (
+ LAN91X_DRIVER *LanDriver,
+ UINTN RegAd
+ )
+{
+ UINT32 Value;
+
+ // Bit-bang the MII Serial Frame read operation
+ MdioOutput (LanDriver, 32, 0xffffffff); // Send 32 Ones as a preamble
+ MdioOutput (LanDriver, 2, 0x01); // Send Start (01)
+ MdioOutput (LanDriver, 2, 0x02); // Send Read (10)
+ MdioOutput (LanDriver, 5, LanDriver->PhyAd); // Send PHYAD[4:0]
+ MdioOutput (LanDriver, 5, RegAd); // Send REGAD[4:0]
+
+ (VOID) MdioInput (LanDriver, 2); // Discard TurnAround bits
+ Value = MdioInput (LanDriver, 16); // Read 16 data bits
+
+ // Idle the MDIO bus
+ MdioIdle (LanDriver);
+
+ return (Value & 0xffff);
+}
+// Calculate approximate time to read a PHY register in microseconds
+#define PHY_READ_TIME (((32 + 2 + 2 + 5 + 5) * PHY_OUTPUT_TIME) + \
+ ((2 + 16) * PHY_INPUT_TIME))
+
+
+/* ---------------- Debug Functions ------------------ */
+
+#ifdef LAN91X_PRINT_REGISTERS
+STATIC
+VOID
+PrintIoRegisters (
+ IN LAN91X_DRIVER *LanDriver
+ )
+{
+ UINTN Bank;
+ UINTN Offset;
+ UINT16 Value;
+
+ DEBUG((EFI_D_ERROR, "\nLAN91x I/O Register Dump:\n"));
+
+ // Print currrent bank select register
+ Value = MmioRead16 (LanDriver->IoBase + LAN91X_BANK_OFFSET);
+ DEBUG((EFI_D_ERROR, " BankSel: %d Bank Register %04x (%d)\n",
+ LanDriver->BankSel, Value, Value & 0x0007));
+
+ // Print all I/O registers
+ for (Offset = 0; Offset < 0x0e; Offset += 2) {
+ DEBUG((EFI_D_ERROR, " %02x:", Offset));
+ for (Bank = 0; Bank <= 3; ++Bank) {
+ DEBUG((EFI_D_ERROR, " %04x", ReadIoReg16 (LanDriver, MakeRegister (Bank, Offset))));
+ }
+ DEBUG((EFI_D_ERROR, "\n"));
+ }
+}
+
+STATIC
+VOID
+PrintPhyRegisters (
+ IN LAN91X_DRIVER *LanDriver
+ )
+{
+ UINTN RegNum;
+
+ DEBUG((EFI_D_ERROR, "\nLAN91x Phy %d Register Dump:\n", LanDriver->PhyAd));
+
+ // Print all Phy registers
+ for (RegNum = 0; RegNum <= 5; ++RegNum) {
+ DEBUG((EFI_D_ERROR, " %2d: %04x\n",
+ RegNum,
+ ReadPhyReg16 (LanDriver, RegNum)
+ ));
+ }
+ for (RegNum = 16; RegNum <= 20; ++RegNum) {
+ DEBUG((EFI_D_ERROR, " %2d: %04x\n",
+ RegNum,
+ ReadPhyReg16 (LanDriver, RegNum)
+ ));
+ }
+}
+#endif
+
+#if LAN91X_PRINT_PACKET_HEADERS
+STATIC
+VOID
+PrintIpDgram (
+ IN CONST VOID *DstMac,
+ IN CONST VOID *SrcMac,
+ IN CONST VOID *Proto,
+ IN CONST VOID *IpDgram
+ )
+{
+ CONST UINT8 *Ptr;
+ UINT16 SrcPort;
+ UINT16 DstPort;
+
+ Ptr = DstMac;
+ DEBUG((EFI_D_ERROR, " Dst: %02x-%02x-%02x",
+ Ptr[0], Ptr[1], Ptr[2]));
+ DEBUG((EFI_D_ERROR, "-%02x-%02x-%02x",
+ Ptr[3], Ptr[4], Ptr[5]));
+
+ Ptr = SrcMac;
+ DEBUG((EFI_D_ERROR, " Src: %02x-%02x-%02x",
+ Ptr[0], Ptr[1], Ptr[2]));
+ DEBUG((EFI_D_ERROR, "-%02x-%02x-%02x",
+ Ptr[3], Ptr[4], Ptr[5]));
+
+ Ptr = Proto;
+ DEBUG((EFI_D_ERROR, " Proto: %02x%02x\n",
+ Ptr[0], Ptr[1]));
+
+ Ptr = IpDgram;
+ switch (Ptr[9]) {
+ case EFI_IP_PROTO_ICMP:
+ DEBUG((EFI_D_ERROR, " ICMP"));
+ break;
+ case EFI_IP_PROTO_TCP:
+ DEBUG((EFI_D_ERROR, " TCP"));
+ break;
+ case EFI_IP_PROTO_UDP:
+ DEBUG((EFI_D_ERROR, " UDP"));
+ break;
+ default:
+ DEBUG((EFI_D_ERROR, " IpProto %d\n", Ptr[9]));
+ return;
+ }
+
+ DEBUG((EFI_D_ERROR, " SrcIp: %d.%d.%d.%d",
+ Ptr[12], Ptr[13], Ptr[14], Ptr[15]));
+ DEBUG((EFI_D_ERROR, " DstIp: %d.%d.%d.%d",
+ Ptr[16], Ptr[17], Ptr[18], Ptr[19]));
+
+ SrcPort = (Ptr[20] << 8) | Ptr[21];
+ DstPort = (Ptr[22] << 8) | Ptr[23];
+ DEBUG((EFI_D_ERROR, " SrcPort: %d DstPort: %d\n", SrcPort, DstPort));
+}
+#endif
+
+
+/* ---------------- PHY Management Operations ----------------- */
+
+STATIC
+EFI_STATUS
+PhyDetect (
+ IN LAN91X_DRIVER *LanDriver
+ )
+{
+ UINT16 PhyId1;
+ UINT16 PhyId2;
+
+ for (LanDriver->PhyAd = 0x1f; LanDriver->PhyAd >= 0 ; --LanDriver->PhyAd) {
+ PhyId1 = ReadPhyReg16 (LanDriver, PHY_INDEX_ID1);
+ PhyId2 = ReadPhyReg16 (LanDriver, PHY_INDEX_ID2);
+
+ if ((PhyId1 != 0x0000) && (PhyId1 != 0xffff) &&
+ (PhyId2 != 0x0000) && (PhyId2 != 0xffff)) {
+ if ((PhyId1 == 0x0016) && ((PhyId2 & 0xfff0) == 0xf840)) {
+ DEBUG((EFI_D_ERROR, "LAN91x: PHY type LAN83C183 (LAN91C111 Internal)\n"));
+ } else if ((PhyId1 == 0x0282) && ((PhyId2 & 0xfff0) == 0x1c50)) {
+ DEBUG((EFI_D_ERROR, "LAN91x: PHY type LAN83C180\n"));
+ } else {
+ DEBUG((EFI_D_ERROR, "LAN91x: PHY id %04x:%04x\n", PhyId1, PhyId2));
+ }
+ return EFI_SUCCESS;
+ }
+ }
+
+ DEBUG((EFI_D_ERROR, "LAN91x: PHY detection failed\n"));
+ return EFI_NO_MEDIA;
+}
+
+
+// Check the Link Status and take appropriate action
+STATIC
+BOOLEAN
+CheckLinkStatus (
+ IN LAN91X_DRIVER *LanDriver
+ )
+{
+ UINT16 PhyStatus;
+
+ // Get the PHY Status
+ PhyStatus = ReadPhyReg16 (LanDriver, PHY_INDEX_BASIC_STATUS);
+
+ return (PhyStatus & PHYSTS_LINK_STS) != 0;
+}
+
+
+// Do auto-negotiation
+STATIC
+EFI_STATUS
+PhyAutoNegotiate (
+ IN LAN91X_DRIVER *LanDriver
+ )
+{
+ UINTN Retries;
+ UINT16 PhyControl;
+ UINT16 PhyStatus;
+ UINT16 PhyAdvert;
+
+ // If there isn't a PHY, don't try to reset it
+ if (LanDriver->PhyAd == LAN91X_NO_PHY) {
+ return EFI_SUCCESS;
+ }
+
+ // Next check that auto-negotiation is supported
+ PhyStatus = ReadPhyReg16 (LanDriver, PHY_INDEX_BASIC_STATUS);
+ if ((PhyStatus & PHYSTS_AUTO_CAP) == 0) {
+ return EFI_SUCCESS;
+ }
+
+ // Translate capabilities to advertise
+ PhyAdvert = PHYANA_CSMA;
+
+ if ((PhyStatus & PHYSTS_10BASET_HDPLX) != 0) {
+ PhyAdvert |= PHYANA_10BASET;
+ }
+ if ((PhyStatus & PHYSTS_10BASET_FDPLX) != 0) {
+ PhyAdvert |= PHYANA_10BASETFD;
+ }
+ if ((PhyStatus & PHYSTS_100BASETX_HDPLX) != 0) {
+ PhyAdvert |= PHYANA_100BASETX;
+ }
+ if ((PhyStatus & PHYSTS_100BASETX_FDPLX) != 0) {
+ PhyAdvert |= PHYANA_100BASETXFD;
+ }
+ if ((PhyStatus & PHYSTS_100BASE_T4) != 0) {
+ PhyAdvert |= PHYANA_100BASET4;
+ }
+
+ // Set the capabilities to advertise
+ WritePhyReg16 (LanDriver, PHY_INDEX_AUTO_NEG_ADVERT, PhyAdvert);
+ (VOID) ReadPhyReg16 (LanDriver, PHY_INDEX_AUTO_NEG_ADVERT);
+
+ // Restart Auto-Negotiation
+ PhyControl = ReadPhyReg16 (LanDriver, PHY_INDEX_BASIC_CTRL);
+ PhyControl &= ~(PHYCR_SPEED_SEL | PHYCR_DUPLEX_MODE);
+ PhyControl |= PHYCR_AUTO_EN | PHYCR_RST_AUTO;
+ WritePhyReg16 (LanDriver, PHY_INDEX_BASIC_CTRL, PhyControl);
+
+ // Wait up to 2 seconds for the process to complete
+ Retries = 2000000 / (PHY_READ_TIME + 100);
+ while ((ReadPhyReg16 (LanDriver, PHY_INDEX_BASIC_STATUS) & PHYSTS_AUTO_COMP) == 0) {
+ if (--Retries == 0) {
+ DEBUG((EFI_D_ERROR, "LAN91x: PHY auto-negotiation timed-out\n"));
+ return EFI_TIMEOUT;
+ }
+ gBS->Stall (100);
+ }
+
+ return EFI_SUCCESS;
+}
+
+
+// Perform PHY software reset
+STATIC
+EFI_STATUS
+PhySoftReset (
+ IN LAN91X_DRIVER *LanDriver
+ )
+{
+ UINTN Retries;
+
+ // If there isn't a PHY, don't try to reset it
+ if (LanDriver->PhyAd == LAN91X_NO_PHY) {
+ return EFI_SUCCESS;
+ }
+
+ // Request a PHY reset
+ WritePhyReg16 (LanDriver, PHY_INDEX_BASIC_CTRL, PHYCR_RESET);
+
+ // The internal PHY will reset within 50ms. Allow 100ms.
+ Retries = 100000 / (PHY_READ_TIME + 100);
+ while (ReadPhyReg16 (LanDriver, PHY_INDEX_BASIC_CTRL) & PHYCR_RESET) {
+ if (--Retries == 0) {
+ DEBUG((EFI_D_ERROR, "LAN91x: PHY reset timed-out\n"));
+ return EFI_TIMEOUT;
+ }
+ gBS->Stall (100);
+ }
+
+ return EFI_SUCCESS;
+}
+
+
+/* ---------------- General Operations ----------------- */
+
+STATIC
+EFI_MAC_ADDRESS
+GetCurrentMacAddress (
+ IN LAN91X_DRIVER *LanDriver
+ )
+{
+ UINTN RegNum;
+ UINT8 *Addr;
+ EFI_MAC_ADDRESS MacAddress;
+
+ SetMem (&MacAddress, sizeof(MacAddress), 0);
+
+ Addr = &MacAddress.Addr[0];
+ for (RegNum = LAN91X_IAR0; RegNum <= LAN91X_IAR5; ++RegNum) {
+ *Addr = ReadIoReg8 (LanDriver, RegNum);
+ ++Addr;
+ }
+
+ return MacAddress;
+}
+
+STATIC
+EFI_STATUS
+SetCurrentMacAddress (
+ IN LAN91X_DRIVER *LanDriver,
+ IN EFI_MAC_ADDRESS *MacAddress
+ )
+{
+ UINTN RegNum;
+ UINT8 *Addr;
+
+ Addr = &MacAddress->Addr[0];
+ for (RegNum = LAN91X_IAR0; RegNum <= LAN91X_IAR5; ++RegNum) {
+ WriteIoReg8 (LanDriver, RegNum, *Addr);
+ ++Addr;
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+MmuOperation (
+ IN LAN91X_DRIVER *LanDriver,
+ IN UINTN MmuOp
+ )
+{
+ UINTN Polls;
+
+ WriteIoReg16 (LanDriver, LAN91X_MMUCR, MmuOp);
+ Polls = 100;
+ while ((ReadIoReg16 (LanDriver, LAN91X_MMUCR) & MMUCR_BUSY) != 0) {
+ if (--Polls == 0) {
+ DEBUG((EFI_D_ERROR, "LAN91x: MMU operation %04x timed-out\n", MmuOp));
+ return EFI_TIMEOUT;
+ }
+ gBS->Stall (LAN91X_STALL);
+ }
+
+ return EFI_SUCCESS;
+}
+
+// Read bytes from the DATA register
+STATIC
+EFI_STATUS
+ReadIoData (
+ IN LAN91X_DRIVER *LanDriver,
+ IN VOID *Buffer,
+ IN UINTN BufLen
+ )
+{
+ UINT8 *Ptr;
+
+ Ptr = Buffer;
+ for (; BufLen > 0; --BufLen) {
+ *Ptr = ReadIoReg8 (LanDriver, LAN91X_DATA0);
+ ++Ptr;
+ }
+
+ return EFI_SUCCESS;
+}
+
+// Write bytes to the DATA register
+STATIC
+EFI_STATUS
+WriteIoData (
+ IN LAN91X_DRIVER *LanDriver,
+ IN VOID *Buffer,
+ IN UINTN BufLen
+ )
+{
+ UINT8 *Ptr;
+
+ Ptr = Buffer;
+ for (; BufLen > 0; --BufLen) {
+ WriteIoReg8 (LanDriver, LAN91X_DATA0, *Ptr);
+ ++Ptr;
+ }
+
+ return EFI_SUCCESS;
+}
+
+// Disable the interface
+STATIC
+EFI_STATUS
+ChipDisable (
+ IN LAN91X_DRIVER *LanDriver
+ )
+{
+#ifdef LAN91X_POWER_DOWN
+ UINT16 Val16;
+#endif
+
+ // Stop Rx and Tx operations
+ WriteIoReg16 (LanDriver, LAN91X_RCR, RCR_CLEAR);
+ WriteIoReg16 (LanDriver, LAN91X_TCR, TCR_CLEAR);
+
+#ifdef LAN91X_POWER_DOWN
+ // Power-down the chip
+ Val16 = ReadIoReg16 (LanDriver, LAN91X_CR);
+ Val16 &= ~CR_EPH_POWER_EN;
+ WriteIoReg16 (LanDriver, LAN91X_CR, Val16);
+#endif
+
+ return EFI_SUCCESS;
+}
+
+// Enable the interface
+STATIC
+EFI_STATUS
+ChipEnable (
+ IN LAN91X_DRIVER *LanDriver
+ )
+{
+#ifdef LAN91X_POWER_DOWN
+ UINT16 Val16;
+
+ // Power-up the chip
+ Val16 = ReadIoReg16 (LanDriver, LAN91X_CR);
+ Val16 |= CR_EPH_POWER_EN;
+ WriteIoReg16 (LanDriver, LAN91X_CR, Val16);
+ gBS->Stall (LAN91X_STALL);
+#endif
+
+ // Start Rx and Tx operations
+ WriteIoReg16 (LanDriver, LAN91X_TCR, TCR_DEFAULT);
+ WriteIoReg16 (LanDriver, LAN91X_RCR, RCR_DEFAULT);
+
+ return EFI_SUCCESS;
+}
+
+
+// Perform software reset on the LAN91x
+STATIC
+EFI_STATUS
+SoftReset (
+ IN LAN91X_DRIVER *LanDriver
+ )
+{
+ UINT16 Val16;
+
+ // Issue the reset
+ WriteIoReg16 (LanDriver, LAN91X_RCR, RCR_SOFT_RST);
+ gBS->Stall (LAN91X_STALL);
+ WriteIoReg16 (LanDriver, LAN91X_RCR, RCR_CLEAR);
+
+ // Set the configuration register
+ WriteIoReg16 (LanDriver, LAN91X_CR, CR_DEFAULT);
+ gBS->Stall (LAN91X_STALL);
+
+ // Stop Rx and Tx
+ WriteIoReg16 (LanDriver, LAN91X_RCR, RCR_CLEAR);
+ WriteIoReg16 (LanDriver, LAN91X_TCR, TCR_CLEAR);
+
+ // Initialize the Control Register
+ Val16 = ReadIoReg16 (LanDriver, LAN91X_CTR);
+ Val16 |= CTR_AUTO_REL;
+ WriteIoReg16 (LanDriver, LAN91X_CTR, Val16);
+
+ // Reset the MMU
+ MmuOperation (LanDriver, MMUCR_OP_RESET_MMU);
+
+ return EFI_SUCCESS;
+}
+
+/*
+** Probe()
+**
+** Validate that there is a LAN91x device.
+**
+*/
+STATIC
+EFI_STATUS
+Probe (
+ IN LAN91X_DRIVER *LanDriver
+ )
+{
+ UINT16 Bank;
+ UINT16 Val16;
+ CHAR16 CONST *ChipId;
+ UINTN ResetTime;
+
+ // First check that the Bank Select register is valid
+ Bank = MmioRead16 (LanDriver->IoBase + LAN91X_BANK_OFFSET);
+ if ((Bank & 0xff00) != 0x3300) {
+ DEBUG((EFI_D_ERROR, "LAN91x: signature error: expecting 33xx, read %04x\n", Bank));
+ return EFI_DEVICE_ERROR;
+ }
+
+ // Try reading the revision register next
+ LanDriver->BankSel = 0xff;
+ Val16 = ReadIoReg16 (LanDriver, LAN91X_REV);
+
+ Bank = MmioRead16 (LanDriver->IoBase + LAN91X_BANK_OFFSET);
+ if ((Bank & 0xff03) != 0x3303) {
+ DEBUG((EFI_D_ERROR, "LAN91x: signature error: expecting 33x3, read %04x\n", Bank));
+ return EFI_DEVICE_ERROR;
+ }
+
+ // Validate the revision register
+ if ((Val16 & 0xff00) != 0x3300) {
+ DEBUG((EFI_D_ERROR, "LAN91x: revision error: expecting 33xx, read %04x\n", Val16));
+ return EFI_DEVICE_ERROR;
+ }
+
+ ChipId = ChipIds[(Val16 >> 4) & 0x0f];
+ if (ChipId == NULL) {
+ DEBUG((EFI_D_ERROR, "LAN91x: unrecognized revision: %04x\n", Val16));
+ return EFI_DEVICE_ERROR;
+ }
+ DEBUG((EFI_D_ERROR, "LAN91x: detected chip %s rev %d\n", ChipId, Val16 & 0xf));
+ LanDriver->Revision = Val16 & 0xff;
+
+ // Reload from EEPROM to get the hardware MAC address
+ WriteIoReg16 (LanDriver, LAN91X_CTR, CTR_RESERVED | CTR_RELOAD);
+ ResetTime = 1000;
+ while ((ReadIoReg16 (LanDriver, LAN91X_CTR) & CTR_RELOAD) != 0) {
+ if (--ResetTime == 0) {
+ DEBUG((EFI_D_ERROR, "LAN91x: reload from EEPROM timed-out\n"));
+ WriteIoReg16 (LanDriver, LAN91X_CTR, CTR_RESERVED);
+ return EFI_DEVICE_ERROR;
+ }
+ gBS->Stall (LAN91X_STALL);
+ }
+
+ // Read and save the Permanent MAC Address
+ LanDriver->SnpMode.PermanentAddress = GetCurrentMacAddress (LanDriver);
+ LanDriver->SnpMode.CurrentAddress = LanDriver->SnpMode.PermanentAddress;
+ DEBUG((EFI_D_ERROR, //EFI_D_NET | EFI_D_INFO,
+ "LAN91x: HW MAC Address: %02x-%02x-%02x-%02x-%02x-%02x\n",
+ LanDriver->SnpMode.PermanentAddress.Addr[0],
+ LanDriver->SnpMode.PermanentAddress.Addr[1],
+ LanDriver->SnpMode.PermanentAddress.Addr[2],
+ LanDriver->SnpMode.PermanentAddress.Addr[3],
+ LanDriver->SnpMode.PermanentAddress.Addr[4],
+ LanDriver->SnpMode.PermanentAddress.Addr[5]
+ ));
+
+ // Reset the device
+ SoftReset (LanDriver);
+
+ // Try to detect a PHY
+ if (LanDriver->Revision > (CHIP_91100 << 4)) {
+ PhyDetect (LanDriver);
+ } else {
+ LanDriver->PhyAd = LAN91X_NO_PHY;
+ }
+
+ return EFI_SUCCESS;
+}
+
+
+
+
+/*------------------ Simple Network Driver entry point functions ------------------*/
+
+// Refer to the Simple Network Protocol section (21.1)
+// in the UEFI 2.3.1 Specification for documentation.
+
+#define ReturnUnlock(s) do { Status = (s); goto exit_unlock; } while(0)
+
+
+/*
+** UEFI Start() function
+**
+*/
+EFI_STATUS
+EFIAPI
+SnpStart (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp
+ )
+{
+ EFI_SIMPLE_NETWORK_MODE *Mode;
+ EFI_TPL SavedTpl;
+ EFI_STATUS Status;
+
+ // Check Snp instance
+ if (Snp == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Serialize access to data and registers
+ SavedTpl = gBS->RaiseTPL (LAN91X_TPL);
+ Mode = Snp->Mode;
+
+ // Check state of the driver
+ switch (Mode->State) {
+ case EfiSimpleNetworkStopped:
+ break;
+ case EfiSimpleNetworkStarted:
+ case EfiSimpleNetworkInitialized:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver already started\n"));
+ ReturnUnlock (EFI_ALREADY_STARTED);
+ default:
+ DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n",
+ (UINTN)Snp->Mode->State));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ }
+
+
+ // Change state
+ Mode->State = EfiSimpleNetworkStarted;
+ Status = EFI_SUCCESS;
+
+ // Restore TPL and return
+exit_unlock:
+ gBS->RestoreTPL (SavedTpl);
+ return Status;
+}
+
+/*
+** UEFI Stop() function
+**
+*/
+EFI_STATUS
+EFIAPI
+SnpStop (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp
+ )
+{
+ LAN91X_DRIVER *LanDriver;
+ EFI_TPL SavedTpl;
+ EFI_STATUS Status;
+
+ // Check Snp Instance
+ if (Snp == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Serialize access to data and registers
+ SavedTpl = gBS->RaiseTPL (LAN91X_TPL);
+
+ // Check state of the driver
+ switch (Snp->Mode->State) {
+ case EfiSimpleNetworkStarted:
+ case EfiSimpleNetworkInitialized:
+ break;
+ case EfiSimpleNetworkStopped:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n"));
+ ReturnUnlock (EFI_NOT_STARTED);
+ default:
+ DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n",
+ (UINTN)Snp->Mode->State));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ }
+
+ // Find the LanDriver structure
+ LanDriver = INSTANCE_FROM_SNP_THIS(Snp);
+
+ // Stop the Tx and Rx
+ ChipDisable (LanDriver);
+
+ // Change the state
+ Snp->Mode->State = EfiSimpleNetworkStopped;
+ Status = EFI_SUCCESS;
+
+ // Restore TPL and return
+exit_unlock:
+ gBS->RestoreTPL (SavedTpl);
+ return Status;
+}
+
+/*
+** UEFI Initialize() function
+**
+*/
+EFI_STATUS
+EFIAPI
+SnpInitialize (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp,
+ IN UINTN RxBufferSize OPTIONAL,
+ IN UINTN TxBufferSize OPTIONAL
+ )
+{
+ LAN91X_DRIVER *LanDriver;
+ EFI_TPL SavedTpl;
+ EFI_STATUS Status;
+
+ // Check Snp Instance
+ if (Snp == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Serialize access to data and registers
+ SavedTpl = gBS->RaiseTPL (LAN91X_TPL);
+
+ // Check that driver was started but not initialised
+ switch (Snp->Mode->State) {
+ case EfiSimpleNetworkStarted:
+ break;
+ case EfiSimpleNetworkInitialized:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver already initialized\n"));
+ ReturnUnlock (EFI_SUCCESS);
+ case EfiSimpleNetworkStopped:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n"));
+ ReturnUnlock (EFI_NOT_STARTED);
+ default:
+ DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n",
+ (UINTN)Snp->Mode->State));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ }
+
+ // Find the LanDriver structure
+ LanDriver = INSTANCE_FROM_SNP_THIS(Snp);
+
+ // Initiate a software reset
+ Status = SoftReset (LanDriver);
+ if (EFI_ERROR(Status)) {
+ DEBUG((EFI_D_WARN, "LAN91x: Soft reset failed\n"));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ }
+
+ // Initiate a PHY reset
+ if (PhySoftReset (LanDriver) < 0) {
+ Snp->Mode->State = EfiSimpleNetworkStopped;
+ DEBUG((EFI_D_WARN, "LAN91x: PHY soft reset timeout\n"));
+ ReturnUnlock (EFI_NOT_STARTED);
+ }
+
+ // Do auto-negotiation
+ Status = PhyAutoNegotiate (LanDriver);
+ if (EFI_ERROR(Status)) {
+ DEBUG((EFI_D_WARN, "LAN91x: PHY auto-negotiation failed\n"));
+ }
+
+ // Enable the receiver and transmitter
+ ChipEnable (LanDriver);
+
+ // Now acknowledge all interrupts
+ WriteIoReg8 (LanDriver, LAN91X_IST, 0xFF);
+
+ // Declare the driver as initialized
+ Snp->Mode->State = EfiSimpleNetworkInitialized;
+ Status = EFI_SUCCESS;
+
+ // Restore TPL and return
+exit_unlock:
+ gBS->RestoreTPL (SavedTpl);
+ return Status;
+}
+
+/*
+** UEFI Reset () function
+**
+*/
+EFI_STATUS
+EFIAPI
+SnpReset (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp,
+ IN BOOLEAN Verification
+ )
+{
+ LAN91X_DRIVER *LanDriver;
+ EFI_TPL SavedTpl;
+ EFI_STATUS Status;
+
+ // Check Snp Instance
+ if (Snp == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Serialize access to data and registers
+ SavedTpl = gBS->RaiseTPL (LAN91X_TPL);
+
+ // Check that driver was started and initialised
+ switch (Snp->Mode->State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+ case EfiSimpleNetworkStarted:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver not yet initialized\n"));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ case EfiSimpleNetworkStopped:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n"));
+ ReturnUnlock (EFI_NOT_STARTED);
+ default:
+ DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n",
+ (UINTN)Snp->Mode->State));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ }
+
+ // Find the LanDriver structure
+ LanDriver = INSTANCE_FROM_SNP_THIS(Snp);
+
+ // Initiate a software reset
+ if (EFI_ERROR (SoftReset (LanDriver))) {
+ DEBUG((EFI_D_WARN, "LAN91x: Soft reset failed\n"));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ }
+
+ // Initiate a PHY reset
+ if (EFI_ERROR (PhySoftReset (LanDriver))) {
+ DEBUG((EFI_D_WARN, "LAN91x: PHY soft reset failed\n"));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ }
+
+ // Enable the receiver and transmitter
+ Status = ChipEnable (LanDriver);
+
+ // Restore TPL and return
+exit_unlock:
+ gBS->RestoreTPL (SavedTpl);
+ return Status;
+}
+
+/*
+** UEFI Shutdown () function
+**
+*/
+EFI_STATUS
+EFIAPI
+SnpShutdown (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp
+ )
+{
+ LAN91X_DRIVER *LanDriver;
+ EFI_TPL SavedTpl;
+ EFI_STATUS Status;
+
+ // Check Snp Instance
+ if (Snp == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Serialize access to data and registers
+ SavedTpl = gBS->RaiseTPL (LAN91X_TPL);
+
+ // First check that driver has already been initialized
+ switch (Snp->Mode->State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+ case EfiSimpleNetworkStarted:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver not yet initialized\n"));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ case EfiSimpleNetworkStopped:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver in stopped state\n"));
+ ReturnUnlock (EFI_NOT_STARTED);
+ default:
+ DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n",
+ (UINTN)Snp->Mode->State));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ }
+
+ // Find the LanDriver structure
+ LanDriver = INSTANCE_FROM_SNP_THIS(Snp);
+
+ // Disable the interface
+ Status = ChipDisable (LanDriver);
+
+ // Restore TPL and return
+exit_unlock:
+ gBS->RestoreTPL (SavedTpl);
+ return Status;
+}
+
+
+/*
+** UEFI ReceiveFilters() function
+**
+*/
+EFI_STATUS
+EFIAPI
+SnpReceiveFilters (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp,
+ IN UINT32 Enable,
+ IN UINT32 Disable,
+ IN BOOLEAN Reset,
+ IN UINTN NumMfilter OPTIONAL,
+ IN EFI_MAC_ADDRESS *Mfilter OPTIONAL
+ )
+{
+#define MCAST_HASH_BYTES 8
+
+ LAN91X_DRIVER *LanDriver;
+ EFI_SIMPLE_NETWORK_MODE *SnpMode;
+ EFI_TPL SavedTpl;
+ EFI_STATUS Status;
+ UINTN i;
+ UINT32 Crc;
+ UINT16 RcvCtrl;
+ UINT8 McastHash[MCAST_HASH_BYTES];
+
+ // Check Snp Instance
+ if (Snp == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Serialize access to data and registers
+ SavedTpl = gBS->RaiseTPL (LAN91X_TPL);
+
+ // First check that driver has already been initialized
+ switch (Snp->Mode->State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+ case EfiSimpleNetworkStarted:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver not yet initialized\n"));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ case EfiSimpleNetworkStopped:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n"));
+ ReturnUnlock (EFI_NOT_STARTED);
+ default:
+ DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n",
+ (UINTN)Snp->Mode->State));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ }
+
+ // Find the LanDriver structure
+ LanDriver = INSTANCE_FROM_SNP_THIS(Snp);
+ SnpMode = Snp->Mode;
+
+#ifdef LAN91X_PRINT_RECEIVE_FILTERS
+ DEBUG((EFI_D_ERROR, "LAN91x:SnpReceiveFilters()\n"));
+ DEBUG((EFI_D_ERROR, " Enable = %08x\n", Enable));
+ DEBUG((EFI_D_ERROR, " Disable = %08x\n", Disable));
+ DEBUG((EFI_D_ERROR, " Reset = %d\n", Reset));
+ DEBUG((EFI_D_ERROR, " NumMfilter = %d\n", NumMfilter));
+ for (i = 0; i < NumMfilter; ++i) {
+ DEBUG((EFI_D_ERROR,
+ " [%2d] = %02x-%02x-%02x-%02x-%02x-%02x\n",
+ i,
+ Mfilter[i].Addr[0],
+ Mfilter[i].Addr[1],
+ Mfilter[i].Addr[2],
+ Mfilter[i].Addr[3],
+ Mfilter[i].Addr[4],
+ Mfilter[i].Addr[5]));
+ }
+#endif
+
+ // Update the Multicast Hash registers
+ if (Reset) {
+ // Clear the hash table
+ SetMem (McastHash, MCAST_HASH_BYTES, 0);
+ SnpMode->MCastFilterCount = 0;
+ } else {
+ // Read the current hash table
+ for (i = 0; i < MCAST_HASH_BYTES; ++i) {
+ McastHash[i] = ReadIoReg8 (LanDriver, LAN91X_MT0 + i);
+ }
+ // Set the new additions
+ for (i = 0; i < NumMfilter; ++i) {
+ Crc = MulticastHash (&Mfilter[i], NET_ETHER_ADDR_LEN);
+ McastHash[(Crc >> 29) & 0x3] |= 1 << ((Crc >> 26) & 0x3);
+ }
+ SnpMode->MCastFilterCount = NumMfilter;
+ }
+ // If the hash registers need updating, write them
+ if (Reset || NumMfilter > 0) {
+ for (i = 0; i < MCAST_HASH_BYTES; ++i) {
+ WriteIoReg8 (LanDriver, LAN91X_MT0 + i, McastHash[i]);
+ }
+ }
+
+ RcvCtrl = ReadIoReg16 (LanDriver, LAN91X_RCR);
+ if ((Enable & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS) != 0) {
+ RcvCtrl |= RCR_PRMS;
+ SnpMode->ReceiveFilterSetting |= EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS;
+ }
+ if ((Disable & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS) != 0) {
+ RcvCtrl &= ~RCR_PRMS;
+ SnpMode->ReceiveFilterSetting &= ~EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS;
+ }
+
+ if ((Enable & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST) != 0) {
+ RcvCtrl |= RCR_ALMUL;
+ SnpMode->ReceiveFilterSetting |= EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST;
+ }
+ if ((Disable & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST) != 0) {
+ RcvCtrl &= ~RCR_ALMUL;
+ SnpMode->ReceiveFilterSetting &= ~EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST;
+ }
+ WriteIoReg16 (LanDriver, LAN91X_RCR, RcvCtrl);
+
+ Status = SetCurrentMacAddress (LanDriver, &SnpMode->CurrentAddress);
+
+ // Restore TPL and return
+exit_unlock:
+ gBS->RestoreTPL (SavedTpl);
+ return Status;
+}
+
+/*
+** UEFI StationAddress() function
+**
+*/
+EFI_STATUS
+EFIAPI
+SnpStationAddress (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *Snp,
+ IN BOOLEAN Reset,
+ IN EFI_MAC_ADDRESS *NewMac
+)
+{
+ LAN91X_DRIVER *LanDriver;
+ EFI_TPL SavedTpl;
+ EFI_STATUS Status;
+
+ // Check Snp instance
+ if (Snp == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Serialize access to data and registers
+ SavedTpl = gBS->RaiseTPL (LAN91X_TPL);
+
+ // Check that driver was started and initialised
+ switch (Snp->Mode->State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+ case EfiSimpleNetworkStarted:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver not yet initialized\n"));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ case EfiSimpleNetworkStopped:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n"));
+ ReturnUnlock (EFI_NOT_STARTED);
+ default:
+ DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n",
+ (UINTN)Snp->Mode->State));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ }
+
+ // Find the LanDriver structure
+ LanDriver = INSTANCE_FROM_SNP_THIS(Snp);
+
+ if (Reset) {
+ Snp->Mode->CurrentAddress = Snp->Mode->PermanentAddress;
+ } else {
+ if (NewMac == NULL) {
+ ReturnUnlock (EFI_INVALID_PARAMETER);
+ }
+ Snp->Mode->CurrentAddress = *NewMac;
+ }
+
+ Status = SetCurrentMacAddress (LanDriver, &Snp->Mode->CurrentAddress);
+
+ // Restore TPL and return
+exit_unlock:
+ gBS->RestoreTPL (SavedTpl);
+ return Status;
+}
+
+/*
+** UEFI Statistics() function
+**
+*/
+EFI_STATUS
+EFIAPI
+SnpStatistics (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp,
+ IN BOOLEAN Reset,
+ IN OUT UINTN *StatSize,
+ OUT EFI_NETWORK_STATISTICS *Statistics
+ )
+{
+ LAN91X_DRIVER *LanDriver;
+ EFI_TPL SavedTpl;
+ EFI_STATUS Status;
+
+ // Check Snp instance
+ if (Snp == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Check pointless condition
+ if ((!Reset) && (StatSize == NULL) && (Statistics == NULL)) {
+ return EFI_SUCCESS;
+ }
+
+ // Check the parameters
+ if ((StatSize == NULL) && (Statistics != NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Serialize access to data and registers
+ SavedTpl = gBS->RaiseTPL (LAN91X_TPL);
+
+ // Check that driver was started and initialised
+ switch (Snp->Mode->State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+ case EfiSimpleNetworkStarted:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver not yet initialized\n"));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ case EfiSimpleNetworkStopped:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n"));
+ ReturnUnlock (EFI_NOT_STARTED);
+ default:
+ DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n",
+ (UINTN)Snp->Mode->State));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ }
+
+ // Find the LanDriver structure
+ LanDriver = INSTANCE_FROM_SNP_THIS(Snp);
+
+ // Do a reset if required
+ if (Reset) {
+ ZeroMem (&LanDriver->Stats, sizeof(EFI_NETWORK_STATISTICS));
+ }
+
+ // Check buffer size
+ if (*StatSize < sizeof(EFI_NETWORK_STATISTICS)) {
+ *StatSize = sizeof(EFI_NETWORK_STATISTICS);
+ ReturnUnlock (EFI_BUFFER_TOO_SMALL);
+ goto exit_unlock;
+ }
+
+ // Fill in the statistics
+ CopyMem(&Statistics, &LanDriver->Stats, sizeof(EFI_NETWORK_STATISTICS));
+ Status = EFI_SUCCESS;
+
+ // Restore TPL and return
+exit_unlock:
+ gBS->RestoreTPL (SavedTpl);
+ return Status;
+}
+
+/*
+** UEFI MCastIPtoMAC() function
+**
+*/
+EFI_STATUS
+EFIAPI
+SnpMcastIptoMac (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL* Snp,
+ IN BOOLEAN IsIpv6,
+ IN EFI_IP_ADDRESS *Ip,
+ OUT EFI_MAC_ADDRESS *McastMac
+ )
+{
+ // Check Snp instance
+ if (Snp == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Check parameters
+ if ((McastMac == NULL) || (Ip == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Make sure MAC address is empty
+ ZeroMem (McastMac, sizeof(EFI_MAC_ADDRESS));
+
+ // If we need ipv4 address
+ if (!IsIpv6) {
+ // Most significant 25 bits of a multicast HW address are set
+ McastMac->Addr[0] = 0x01;
+ McastMac->Addr[1] = 0x00;
+ McastMac->Addr[2] = 0x5E;
+
+ // Lower 23 bits from ipv4 address
+ McastMac->Addr[3] = (Ip->v4.Addr[1] & 0x7F); // Clear the ms bit (25th bit of MAC must be 0)
+ McastMac->Addr[4] = Ip->v4.Addr[2];
+ McastMac->Addr[5] = Ip->v4.Addr[3];
+ } else {
+ // Most significant 16 bits of multicast v6 HW address are set
+ McastMac->Addr[0] = 0x33;
+ McastMac->Addr[1] = 0x33;
+
+ // lower four octets are taken from ipv6 address
+ McastMac->Addr[2] = Ip->v6.Addr[8];
+ McastMac->Addr[3] = Ip->v6.Addr[9];
+ McastMac->Addr[4] = Ip->v6.Addr[10];
+ McastMac->Addr[5] = Ip->v6.Addr[11];
+ }
+
+ return EFI_SUCCESS;
+}
+
+/*
+** UEFI NvData() function
+**
+*/
+EFI_STATUS
+EFIAPI
+SnpNvData (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL* pobj,
+ IN BOOLEAN read_write,
+ IN UINTN offset,
+ IN UINTN buff_size,
+ IN OUT VOID *data
+ )
+{
+ DEBUG((EFI_D_ERROR, "LAN91x: Non-volatile storage not supported\n"));
+
+ return EFI_UNSUPPORTED;
+}
+
+
+/*
+** UEFI GetStatus () function
+**
+*/
+EFI_STATUS
+EFIAPI
+SnpGetStatus (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *Snp,
+ OUT UINT32 *IrqStat OPTIONAL,
+ OUT VOID **TxBuff OPTIONAL
+ )
+{
+ LAN91X_DRIVER *LanDriver;
+ EFI_TPL SavedTpl;
+ EFI_STATUS Status;
+ BOOLEAN MediaPresent;
+ UINT8 IstReg;
+ MSK_LINKED_SYSTEM_BUF *LinkedTXRecycleBuff;
+
+ // Check preliminaries
+ if (Snp == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Serialize access to data and registers
+ SavedTpl = gBS->RaiseTPL (LAN91X_TPL);
+
+ // Check that driver was started and initialised
+ switch (Snp->Mode->State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+ case EfiSimpleNetworkStarted:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver not yet initialized\n"));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ case EfiSimpleNetworkStopped:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n"));
+ ReturnUnlock (EFI_NOT_STARTED);
+ default:
+ DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n",
+ (UINTN)Snp->Mode->State));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ }
+
+ // Find the LanDriver structure
+ LanDriver = INSTANCE_FROM_SNP_THIS(Snp);
+
+ // Arbitrarily set the interrupt status to 0
+ if (IrqStat != NULL) {
+ *IrqStat = 0;
+ IstReg = ReadIoReg8 (LanDriver, LAN91X_IST);
+ if ((IstReg & IST_RCV) != 0) {
+ *IrqStat |= EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT;
+ }
+ if ((IstReg & IST_TX) != 0) {
+ *IrqStat |= EFI_SIMPLE_NETWORK_TRANSMIT_INTERRUPT;
+ }
+ }
+
+ // Pass back the completed buffer address
+ // The transmit buffer status is not read when TxBuf is NULL
+ if (TxBuff != NULL) {
+ *((UINT8 **) TxBuff) = (UINT8 *) 0;
+ if( !IsListEmpty (&LanDriver->TransmitQueueHead))
+ {
+ LinkedTXRecycleBuff = CR (GetFirstNode (&LanDriver->TransmitQueueHead), MSK_LINKED_SYSTEM_BUF, Link, TX_MBUF_SIGNATURE);
+ if(LinkedTXRecycleBuff != NULL) {
+ *TxBuff = LinkedTXRecycleBuff->SystemBuf.Buf;
+ RemoveEntryList (&LinkedTXRecycleBuff->Link);
+ FreePool (LinkedTXRecycleBuff);
+ }
+ }
+ }
+
+ // Update the media status
+ MediaPresent = CheckLinkStatus (LanDriver);
+ if (MediaPresent != Snp->Mode->MediaPresent) {
+ DEBUG((EFI_D_WARN, "LAN91x: Link %s\n", MediaPresent ? L"up" : L"down"));
+ }
+ Snp->Mode->MediaPresent = MediaPresent;
+ Status = EFI_SUCCESS;
+
+ // Restore TPL and return
+exit_unlock:
+ gBS->RestoreTPL (SavedTpl);
+ return Status;
+}
+
+
+/*
+** UEFI Transmit() function
+**
+*/
+EFI_STATUS
+EFIAPI
+SnpTransmit (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *Snp,
+ IN UINTN HdrSize,
+ IN UINTN BufSize,
+ IN VOID *BufAddr,
+ IN EFI_MAC_ADDRESS *SrcAddr OPTIONAL,
+ IN EFI_MAC_ADDRESS *DstAddr OPTIONAL,
+ IN UINT16 *Protocol OPTIONAL
+ )
+{
+ LAN91X_DRIVER *LanDriver;
+ EFI_TPL SavedTpl;
+ EFI_STATUS Status;
+ UINT8 *Ptr;
+ UINTN Len;
+ UINTN MmuPages;
+ UINTN Retries;
+ UINT16 Proto;
+ UINT8 PktNum;
+ MSK_LINKED_SYSTEM_BUF *LinkedTXRecycleBuff;
+
+
+ // Check preliminaries
+ if ((Snp == NULL) || (BufAddr == NULL)) {
+ DEBUG((EFI_D_ERROR, "LAN91x: SnpTransmit(): NULL Snp (%p) or BufAddr (%p)\n",
+ Snp, BufAddr));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Serialize access to data and registers
+ SavedTpl = gBS->RaiseTPL (LAN91X_TPL);
+
+ // Check that driver was started and initialised
+ switch (Snp->Mode->State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+ case EfiSimpleNetworkStarted:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver not yet initialized\n"));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ case EfiSimpleNetworkStopped:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n"));
+ ReturnUnlock (EFI_NOT_STARTED);
+ default:
+ DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n",
+ (UINTN)Snp->Mode->State));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ }
+
+ // Find the LanDriver structure
+ LanDriver = INSTANCE_FROM_SNP_THIS(Snp);
+
+ // Ensure header is correct size if non-zero
+ if (HdrSize != 0) {
+ if (HdrSize != Snp->Mode->MediaHeaderSize) {
+ DEBUG((EFI_D_ERROR, "LAN91x: SnpTransmit(): Invalid HdrSize %d\n", HdrSize));
+ ReturnUnlock (EFI_INVALID_PARAMETER);
+ }
+
+ if ((DstAddr == NULL) || (Protocol == NULL)) {
+ DEBUG((EFI_D_ERROR, "LAN91x: SnpTransmit(): NULL DstAddr %p or Protocol %p\n",
+ DstAddr, Protocol));
+ ReturnUnlock (EFI_INVALID_PARAMETER);
+ }
+ }
+
+ // Before transmitting check the link status
+ if (!Snp->Mode->MediaPresent) {
+ DEBUG((EFI_D_WARN, "LAN91x: SnpTransmit(): Link not ready\n"));
+ ReturnUnlock (EFI_NOT_READY);
+ }
+
+ // Calculate the request size in 256-byte "pages" minus 1
+ // The 91C111 ignores this, but some older devices need it.
+ MmuPages = ((BufSize & ~1) + LAN91X_PKT_OVERHEAD - 1) >> 8;
+ if (MmuPages > 7) {
+ DEBUG((EFI_D_WARN, "LAN91x: Tx buffer too large (%d bytes)\n", BufSize));
+ LanDriver->Stats.TxOversizeFrames += 1;
+ LanDriver->Stats.TxDroppedFrames += 1;
+ ReturnUnlock (EFI_BAD_BUFFER_SIZE);
+ }
+
+ // Request allocation of a transmit buffer
+ Status = MmuOperation (LanDriver, MMUCR_OP_TX_ALLOC | MmuPages);
+ if (EFI_ERROR (Status)) {
+ DEBUG((EFI_D_ERROR, "LAN91x: Tx buffer request failure: %d\n", Status));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ }
+
+ // Wait for allocation request completion
+ Retries = LAN91X_MEMORY_ALLOC_POLLS;
+ while ((ReadIoReg8 (LanDriver, LAN91X_IST) & IST_ALLOC) == 0) {
+ if (--Retries == 0) {
+ DEBUG((EFI_D_ERROR, "LAN91x: Tx buffer allocation timeout\n"));
+ ReturnUnlock (EFI_TIMEOUT);
+ }
+ }
+
+ // Check for successful allocation
+ PktNum = ReadIoReg8 (LanDriver, LAN91X_ARR);
+ if ((PktNum & ARR_FAILED) != 0) {
+ DEBUG((EFI_D_ERROR, "LAN91x: Tx buffer allocation failure: %02x\n", PktNum));
+ ReturnUnlock (EFI_NOT_READY);
+ }
+ PktNum &= ARR_PACKET;
+
+ // Check for the nature of the frame
+ // If no destination address, it's ARP broadcast
+ if(DstAddr != NULL)
+ {
+ if (DstAddr->Addr[0] == 0xFF) {
+ LanDriver->Stats.TxBroadcastFrames += 1;
+ } else if ((DstAddr->Addr[0] & 0x1) == 1) {
+ LanDriver->Stats.TxMulticastFrames += 1;
+ } else {
+ LanDriver->Stats.TxUnicastFrames += 1;
+ }
+ } else {
+ LanDriver->Stats.TxBroadcastFrames += 1;
+ }
+
+ // Set the Packet Number and Pointer registers
+ WriteIoReg8 (LanDriver, LAN91X_PNR, PktNum);
+ WriteIoReg16 (LanDriver, LAN91X_PTR, PTR_AUTO_INCR);
+
+ // Set up mutable buffer information variables
+ Ptr = BufAddr;
+ Len = BufSize;
+
+ // Write Status and Byte Count first
+ WriteIoReg16 (LanDriver, LAN91X_DATA0, 0);
+ WriteIoReg16 (LanDriver, LAN91X_DATA0, (Len + LAN91X_PKT_OVERHEAD) & BCW_COUNT);
+
+ // This packet may come with a preconfigured Ethernet header.
+ // If not, we need to construct one from optional parameters.
+ if (HdrSize) {
+
+ // Write the destination address
+ WriteIoData (LanDriver, DstAddr, NET_ETHER_ADDR_LEN);
+
+ // Write the Source Address
+ if (SrcAddr != NULL) {
+ WriteIoData (LanDriver, SrcAddr, NET_ETHER_ADDR_LEN);
+ } else {
+ WriteIoData (LanDriver, &LanDriver->SnpMode.CurrentAddress, NET_ETHER_ADDR_LEN);
+ }
+
+ // Write the Protocol word
+ Proto = HTONS (*Protocol);
+ WriteIoReg16 (LanDriver, LAN91X_DATA0, Proto);
+
+ // Adjust the data start and length
+ Ptr += sizeof(ETHER_HEAD);
+ Len -= sizeof(ETHER_HEAD);
+ }
+
+ // Copy the remainder data buffer, except the odd byte
+ WriteIoData (LanDriver, Ptr, Len & ~1);
+ Ptr += Len & ~1;
+ Len &= 1;
+
+ // Write the Packet Control Word and odd byte
+ WriteIoReg16 (LanDriver, LAN91X_DATA0,
+ (Len != 0) ? (PCW_ODD | PCW_CRC | *Ptr) : PCW_CRC);
+
+ // Release the packet for transmission
+ Status = MmuOperation (LanDriver, MMUCR_OP_TX_PUSH);
+ if (EFI_ERROR (Status)) {
+ DEBUG((EFI_D_ERROR, "LAN91x: Tx buffer release failure: %d\n", Status));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ }
+
+ // Update the Tx statistics
+ LanDriver->Stats.TxTotalBytes += BufSize;
+ LanDriver->Stats.TxGoodFrames += 1;
+
+ // Update the Tx Buffer cache
+ LinkedTXRecycleBuff = AllocateZeroPool (sizeof (MSK_LINKED_SYSTEM_BUF));
+ if (LinkedTXRecycleBuff == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ LinkedTXRecycleBuff->Signature = TX_MBUF_SIGNATURE;
+ //
+ // Add the passed Buffer to the transmit queue. Don't copy.
+ //
+ LinkedTXRecycleBuff->SystemBuf.Buf = BufAddr;
+ LinkedTXRecycleBuff->SystemBuf.Length = BufSize;
+ InsertTailList (&LanDriver->TransmitQueueHead, &LinkedTXRecycleBuff->Link);
+
+ Status = EFI_SUCCESS;
+
+ // Dump the packet header
+#if LAN91X_PRINT_PACKET_HEADERS
+ Ptr = BufAddr;
+ DEBUG((EFI_D_ERROR, "LAN91X:SnpTransmit()\n"));
+ DEBUG((EFI_D_ERROR, " HdrSize: %d, SrcAddr: %p, Length: %d, Last byte: %02x\n",
+ HdrSize, SrcAddr, BufSize, Ptr[BufSize - 1]));
+ PrintIpDgram (
+ (HdrSize == 0) ? (EFI_MAC_ADDRESS *)&Ptr[0] : DstAddr,
+ (HdrSize == 0) ? (EFI_MAC_ADDRESS *)&Ptr[6] : (SrcAddr != NULL) ? SrcAddr : &LanDriver->SnpMode.CurrentAddress,
+ (HdrSize == 0) ? (UINT16 *)&Ptr[12] : &Proto,
+ &Ptr[14]
+ );
+#endif
+
+ // Restore TPL and return
+exit_unlock:
+ gBS->RestoreTPL (SavedTpl);
+ return Status;
+}
+
+
+/*
+** UEFI Receive() function
+**
+*/
+EFI_STATUS
+EFIAPI
+SnpReceive (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *Snp,
+ OUT UINTN *HdrSize OPTIONAL,
+ IN OUT UINTN *BuffSize,
+ OUT VOID *Data,
+ OUT EFI_MAC_ADDRESS *SrcAddr OPTIONAL,
+ OUT EFI_MAC_ADDRESS *DstAddr OPTIONAL,
+ OUT UINT16 *Protocol OPTIONAL
+ )
+{
+ EFI_TPL SavedTpl;
+ EFI_STATUS Status;
+ LAN91X_DRIVER *LanDriver;
+ UINT8 *DataPtr;
+ UINT16 PktStatus;
+ UINT16 PktLength;
+ UINT16 PktControl;
+ UINT8 IstReg;
+
+ // Check preliminaries
+ if ((Snp == NULL) || (Data == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Serialize access to data and registers
+ SavedTpl = gBS->RaiseTPL (LAN91X_TPL);
+
+ // Check that driver was started and initialised
+ switch (Snp->Mode->State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+ case EfiSimpleNetworkStarted:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver not yet initialized\n"));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ case EfiSimpleNetworkStopped:
+ DEBUG((EFI_D_WARN, "LAN91x: Driver not started\n"));
+ ReturnUnlock (EFI_NOT_STARTED);
+ default:
+ DEBUG((EFI_D_ERROR, "LAN91x: Driver in an invalid state: %u\n",
+ (UINTN)Snp->Mode->State));
+ ReturnUnlock (EFI_DEVICE_ERROR);
+ }
+
+ // Find the LanDriver structure
+ LanDriver = INSTANCE_FROM_SNP_THIS(Snp);
+
+ // Check for Rx Overrun
+ IstReg = ReadIoReg8 (LanDriver, LAN91X_IST);
+ if ((IstReg & IST_RX_OVRN) != 0) {
+ LanDriver->Stats.RxTotalFrames += 1;
+ LanDriver->Stats.RxDroppedFrames += 1;
+ WriteIoReg8 (LanDriver, LAN91X_IST, IST_RX_OVRN);
+ DEBUG((EFI_D_WARN, "LAN91x: Receiver overrun\n"));
+ }
+
+ // Check for Rx data available
+ if ((IstReg & IST_RCV) == 0) {
+ ReturnUnlock (EFI_NOT_READY);
+ }
+
+ // Configure the PTR register for reading
+ WriteIoReg16 (LanDriver, LAN91X_PTR, PTR_RCV | PTR_AUTO_INCR | PTR_READ);
+
+ // Read the Packet Status and Packet Length words
+ PktStatus = ReadIoReg16 (LanDriver, LAN91X_DATA0);
+ PktLength = ReadIoReg16 (LanDriver, LAN91X_DATA0) & BCW_COUNT;
+
+ // Check for valid received packet
+ if ((PktStatus == 0) && (PktLength == 0)) {
+ DEBUG((EFI_D_WARN, "LAN91x: Received zero-length packet. IST=%04x\n", IstReg));
+ ReturnUnlock (EFI_NOT_READY);
+ }
+ LanDriver->Stats.RxTotalFrames += 1;
+
+ // Check if we got a CRC error
+ if ((PktStatus & RX_BAD_CRC) != 0) {
+ DEBUG((EFI_D_WARN, "LAN91x: Received frame CRC error\n"));
+ LanDriver->Stats.RxCrcErrorFrames += 1;
+ LanDriver->Stats.RxDroppedFrames += 1;
+ Status = EFI_DEVICE_ERROR;
+ goto exit_release;
+ }
+
+ // Check if we got a too-short frame
+ if ((PktStatus & RX_TOO_SHORT) != 0) {
+ DEBUG((EFI_D_WARN, "LAN91x: Received frame too short (%d bytes)\n", PktLength));
+ LanDriver->Stats.RxUndersizeFrames += 1;
+ LanDriver->Stats.RxDroppedFrames += 1;
+ Status = EFI_DEVICE_ERROR;
+ goto exit_release;
+ }
+
+ // Check if we got a too-long frame
+ if ((PktStatus & RX_TOO_LONG) != 0) {
+ DEBUG((EFI_D_WARN, "LAN91x: Received frame too long (%d bytes)\n", PktLength));
+ LanDriver->Stats.RxOversizeFrames += 1;
+ LanDriver->Stats.RxDroppedFrames += 1;
+ Status = EFI_DEVICE_ERROR;
+ goto exit_release;
+ }
+
+ // Check if we got an alignment error
+ if ((PktStatus & RX_ALGN_ERR) != 0) {
+ DEBUG((EFI_D_WARN, "LAN91x: Received frame alignment error\n"));
+ // Don't seem to keep track of these specifically
+ LanDriver->Stats.RxDroppedFrames += 1;
+ Status = EFI_DEVICE_ERROR;
+ goto exit_release;
+ }
+
+ // Classify the received fram
+ if ((PktStatus & RX_MULTICAST) != 0) {
+ LanDriver->Stats.RxMulticastFrames += 1;
+ } else if ((PktStatus & RX_BROADCAST) != 0) {
+ LanDriver->Stats.RxBroadcastFrames += 1;
+ } else {
+ LanDriver->Stats.RxUnicastFrames += 1;
+ }
+
+ // Calculate the received packet data length
+ PktLength -= LAN91X_PKT_OVERHEAD;
+ if ((PktStatus & RX_ODD_FRAME) != 0) {
+ PktLength += 1;
+ }
+
+ // Check buffer size
+ if (*BuffSize < PktLength) {
+ DEBUG((EFI_D_WARN, "LAN91x: Receive buffer too small for packet (%d < %d)\n",
+ *BuffSize, PktLength));
+ *BuffSize = PktLength;
+ Status = EFI_BUFFER_TOO_SMALL;
+ goto exit_release;
+ }
+
+ // Transfer the data bytes
+ DataPtr = Data;
+ ReadIoData (LanDriver, DataPtr, PktLength & ~0x0001);
+
+ // Read the PktControl and Odd Byte from the FIFO
+ PktControl = ReadIoReg16 (LanDriver, LAN91X_DATA0);
+ if ((PktControl & PCW_ODD) != 0) {
+ DataPtr[PktLength - 1] = PktControl & PCW_ODD_BYTE;
+ }
+
+ // Update buffer size
+ *BuffSize = PktLength;
+
+ if (HdrSize != NULL) {
+ *HdrSize = LanDriver->SnpMode.MediaHeaderSize;
+ }
+
+ // Extract the destination address
+ if (DstAddr != NULL) {
+ CopyMem (DstAddr, &DataPtr[0], NET_ETHER_ADDR_LEN);
+ }
+
+ // Get the source address
+ if (SrcAddr != NULL) {
+ CopyMem (SrcAddr, &DataPtr[6], NET_ETHER_ADDR_LEN);
+ }
+
+ // Get the protocol
+ if (Protocol != NULL) {
+ *Protocol = NTOHS (*(UINT16*)(&DataPtr[12]));
+ }
+
+ // Update the Rx statistics
+ LanDriver->Stats.RxTotalBytes += PktLength;
+ LanDriver->Stats.RxGoodFrames += 1;
+ Status = EFI_SUCCESS;
+
+#if LAN91X_PRINT_PACKET_HEADERS
+ // Dump the packet header
+ DEBUG((EFI_D_ERROR, "LAN91X:SnpReceive()\n"));
+ DEBUG((EFI_D_ERROR, " HdrSize: %p, SrcAddr: %p, DstAddr: %p, Protocol: %p\n",
+ HdrSize, SrcAddr, DstAddr, Protocol));
+ DEBUG((EFI_D_ERROR, " Length: %d, Last byte: %02x\n", PktLength, DataPtr[PktLength - 1]));
+ PrintIpDgram (&DataPtr[0], &DataPtr[6], &DataPtr[12], &DataPtr[14]);
+#endif
+
+ // Release the FIFO buffer
+exit_release:
+ MmuOperation (LanDriver, MMUCR_OP_RX_POP_REL);
+
+ // Restore TPL and return
+exit_unlock:
+ gBS->RestoreTPL (SavedTpl);
+ return Status;
+}
+
+
+/*------------------ Driver Execution Environment main entry point ------------------*/
+
+/*
+** Entry point for the LAN91x driver
+**
+*/
+EFI_STATUS
+Lan91xDxeEntry (
+ IN EFI_HANDLE Handle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ LAN91X_DRIVER *LanDriver;
+ EFI_SIMPLE_NETWORK_PROTOCOL *Snp;
+ EFI_SIMPLE_NETWORK_MODE *SnpMode;
+ LAN91X_DEVICE_PATH *Lan91xPath;
+
+ // The PcdLan91xDxeBaseAddress PCD must be defined
+ ASSERT(PcdGet32 (PcdLan91xDxeBaseAddress) != 0);
+
+ // Allocate Resources
+ LanDriver = AllocateZeroPool (sizeof(LAN91X_DRIVER));
+ Lan91xPath = AllocateCopyPool (sizeof(LAN91X_DEVICE_PATH), &Lan91xPathTemplate);
+
+ // Initialize I/O Space access info
+ LanDriver->IoBase = PcdGet32 (PcdLan91xDxeBaseAddress);
+ LanDriver->PhyAd = LAN91X_NO_PHY;
+ LanDriver->BankSel = 0xff;
+
+ // Initialize pointers
+ Snp = &(LanDriver->Snp);
+ SnpMode = &(LanDriver->SnpMode);
+ Snp->Mode = SnpMode;
+
+ // Set the signature of the LAN Driver structure
+ LanDriver->Signature = LAN91X_SIGNATURE;
+
+ // Probe the device
+ Status = Probe (LanDriver);
+ if (EFI_ERROR(Status)) {
+ DEBUG((EFI_D_ERROR, "LAN91x:Lan91xDxeEntry(): Probe failed with status %d\n", Status));
+ return Status;
+ }
+
+#ifdef LAN91X_PRINT_REGISTERS
+ PrintIoRegisters (LanDriver);
+ PrintPhyRegisters (LanDriver);
+#endif
+
+ // Initialize transmit queue
+ InitializeListHead (&LanDriver->TransmitQueueHead);
+
+ // Assign fields and func pointers
+ Snp->Revision = EFI_SIMPLE_NETWORK_PROTOCOL_REVISION;
+ Snp->WaitForPacket = NULL;
+ Snp->Initialize = SnpInitialize;
+ Snp->Start = SnpStart;
+ Snp->Stop = SnpStop;
+ Snp->Reset = SnpReset;
+ Snp->Shutdown = SnpShutdown;
+ Snp->ReceiveFilters = SnpReceiveFilters;
+ Snp->StationAddress = SnpStationAddress;
+ Snp->Statistics = SnpStatistics;
+ Snp->MCastIpToMac = SnpMcastIptoMac;
+ Snp->NvData = SnpNvData;
+ Snp->GetStatus = SnpGetStatus;
+ Snp->Transmit = SnpTransmit;
+ Snp->Receive = SnpReceive;
+
+ // Fill in simple network mode structure
+ SnpMode->State = EfiSimpleNetworkStopped;
+ SnpMode->HwAddressSize = NET_ETHER_ADDR_LEN; // HW address is 6 bytes
+ SnpMode->MediaHeaderSize = sizeof(ETHER_HEAD); // Size of an Ethernet header
+ SnpMode->MaxPacketSize = EFI_PAGE_SIZE; // Ethernet Frame (with VLAN tag +4 bytes)
+
+ // Supported receive filters
+ SnpMode->ReceiveFilterMask = EFI_SIMPLE_NETWORK_RECEIVE_UNICAST |
+ EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST |
+ EFI_SIMPLE_NETWORK_RECEIVE_BROADCAST |
+ EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS |
+ EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST;
+
+ // Initially-enabled receive filters
+ SnpMode->ReceiveFilterSetting = EFI_SIMPLE_NETWORK_RECEIVE_UNICAST |
+ EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST |
+ EFI_SIMPLE_NETWORK_RECEIVE_BROADCAST;
+
+ // LAN91x has 64bit hash table. We can filter an infinite MACs, but
+ // higher-level software must filter out any hash collisions.
+ SnpMode->MaxMCastFilterCount = MAX_MCAST_FILTER_CNT;
+ SnpMode->MCastFilterCount = 0;
+ ZeroMem (&SnpMode->MCastFilter, MAX_MCAST_FILTER_CNT * sizeof(EFI_MAC_ADDRESS));
+
+ // Set the interface type (1: Ethernet or 6: IEEE 802 Networks)
+ SnpMode->IfType = NET_IFTYPE_ETHERNET;
+
+ // Mac address is changeable
+ SnpMode->MacAddressChangeable = TRUE;
+
+ // We can only transmit one packet at a time
+ SnpMode->MultipleTxSupported = FALSE;
+
+ // MediaPresent checks for cable connection and partner link
+ SnpMode->MediaPresentSupported = TRUE;
+ SnpMode->MediaPresent = FALSE;
+
+ // Set broadcast address
+ SetMem (&SnpMode->BroadcastAddress, sizeof (EFI_MAC_ADDRESS), 0xFF);
+
+ // Assign fields for device path
+ Lan91xPath->Lan91x.MacAddress = SnpMode->PermanentAddress;
+ Lan91xPath->Lan91x.IfType = SnpMode->IfType;
+
+ // Initialise the protocol
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &LanDriver->ControllerHandle,
+ &gEfiSimpleNetworkProtocolGuid, Snp,
+ &gEfiDevicePathProtocolGuid, Lan91xPath,
+ NULL
+ );
+
+ // Say what the status of loading the protocol structure is
+ if (EFI_ERROR(Status)) {
+ FreePool (LanDriver);
+ }
+
+ return Status;
+}
diff --git a/Drivers/Net/Lan91xDxe/Lan91xDxe.inf b/Drivers/Net/Lan91xDxe/Lan91xDxe.inf index 0838a3d..f62a7d1 100644 --- a/Drivers/Net/Lan91xDxe/Lan91xDxe.inf +++ b/Drivers/Net/Lan91xDxe/Lan91xDxe.inf @@ -1,58 +1,58 @@ -#/** @file -# INF file for the SMSC LAN91x series Network Controller Driver. -# -# Copyright (c) 2013 Linaro.org -# -# Derived from the LAN9118 driver. Original sources -# Copyright (c) 2012-2013, ARM Limited. All rights reserved. -# -# This program and the accompanying materials are licensed and -# made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license -# may be found at: http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010006 - BASE_NAME = Lan91xDxe - FILE_GUID = 5c12ea2f-9897-48af-8138-25f4ce6ff8d6 - MODULE_TYPE = DXE_DRIVER - VERSION_STRING = 0.1 - ENTRY_POINT = Lan91xDxeEntry - -[Sources.common] - Lan91xDxe.c - Lan91xDxeHw.h - -[Packages] - OpenPlatformPkg/Drivers/Net/Lan91xDxe/Lan91xDxe.dec - NetworkPkg/NetworkPkg.dec - MdeModulePkg/MdeModulePkg.dec - MdePkg/MdePkg.dec - -[LibraryClasses] - BaseLib - UefiLib - NetLib - UefiDriverEntryPoint - BaseMemoryLib - ArmLib - IoLib - TimerLib - DevicePathLib - -[Protocols] - gEfiSimpleNetworkProtocolGuid - gEfiMetronomeArchProtocolGuid - gEfiPxeBaseCodeProtocolGuid - gEfiDevicePathProtocolGuid - -[FixedPcd] - gLan91xDxeTokenSpaceGuid.PcdLan91xDxeBaseAddress - -[Depex] - TRUE +#/** @file
+# INF file for the SMSC LAN91x series Network Controller Driver.
+#
+# Copyright (c) 2013 Linaro.org
+#
+# Derived from the LAN9118 driver. Original sources
+# Copyright (c) 2012-2013, ARM Limited. All rights reserved.
+#
+# This program and the accompanying materials are licensed and
+# made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license
+# may be found at: http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010006
+ BASE_NAME = Lan91xDxe
+ FILE_GUID = 5c12ea2f-9897-48af-8138-25f4ce6ff8d6
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 0.1
+ ENTRY_POINT = Lan91xDxeEntry
+
+[Sources.common]
+ Lan91xDxe.c
+ Lan91xDxeHw.h
+
+[Packages]
+ OpenPlatformPkg/Drivers/Net/Lan91xDxe/Lan91xDxe.dec
+ NetworkPkg/NetworkPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ BaseLib
+ UefiLib
+ NetLib
+ UefiDriverEntryPoint
+ BaseMemoryLib
+ ArmLib
+ IoLib
+ TimerLib
+ DevicePathLib
+
+[Protocols]
+ gEfiSimpleNetworkProtocolGuid
+ gEfiMetronomeArchProtocolGuid
+ gEfiPxeBaseCodeProtocolGuid
+ gEfiDevicePathProtocolGuid
+
+[FixedPcd]
+ gLan91xDxeTokenSpaceGuid.PcdLan91xDxeBaseAddress
+
+[Depex]
+ TRUE
diff --git a/Drivers/Net/Lan91xDxe/Lan91xDxeHw.h b/Drivers/Net/Lan91xDxe/Lan91xDxeHw.h index 9274ba0..1b05c54 100644 --- a/Drivers/Net/Lan91xDxe/Lan91xDxeHw.h +++ b/Drivers/Net/Lan91xDxe/Lan91xDxeHw.h @@ -1,278 +1,278 @@ -/** @file -* SMSC LAN91x series Network Controller Driver. -* -* Copyright (c) 2013 Linaro.org -* -* This program and the accompanying materials are licensed and -* made available under the terms and conditions of the BSD License -* which accompanies this distribution. The full text of the license -* may be found at: http://opensource.org/licenses/bsd-license.php -* -* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -* -**/ - -#ifndef __LAN91XDXEHW_H__ -#define __LAN91XDXEHW_H__ - -#include <Base.h> - -#define MakeRegister(Bank, Offset) (((Bank) << 8) | (Offset)) -#define RegisterToBank(Register) (((Register) >> 8) & 0x07) -#define RegisterToOffset(Register) ((Register) & 0x0f) - -/*--------------------------------------------------------------------------------------------------------------------- - - SMSC LAN91x Registers - ----------------------------------------------------------------------------------------------------------------------*/ -#define LAN91X_BANK_OFFSET 0xe // Bank Select Register (all banks) - -#define LAN91X_TCR MakeRegister (0, 0x0) // Transmit Control Register -#define LAN91X_EPHSR MakeRegister (0, 0x2) // EPH Status Register -#define LAN91X_RCR MakeRegister (0, 0x4) // Receive Control Register -#define LAN91X_ECR MakeRegister (0, 0x6) // Counter Register -#define LAN91X_MIR MakeRegister (0, 0x8) // Memory Information Register -#define LAN91X_RPCR MakeRegister (0, 0xa) // Receive/Phy Control Register - -#define LAN91X_CR MakeRegister (1, 0x0) // Configuration Register -#define LAN91X_BAR MakeRegister (1, 0x2) // Base Address Register -#define LAN91X_IAR0 MakeRegister (1, 0x4) // Individual Address Register 0 -#define LAN91X_IAR1 MakeRegister (1, 0x5) // Individual Address Register 1 -#define LAN91X_IAR2 MakeRegister (1, 0x6) // Individual Address Register 2 -#define LAN91X_IAR3 MakeRegister (1, 0x7) // Individual Address Register 3 -#define LAN91X_IAR4 MakeRegister (1, 0x8) // Individual Address Register 4 -#define LAN91X_IAR5 MakeRegister (1, 0x9) // Individual Address Register 5 -#define LAN91X_GPR MakeRegister (1, 0xa) // General Purpose Register -#define LAN91X_CTR MakeRegister (1, 0xc) // Control Register - -#define LAN91X_MMUCR MakeRegister (2, 0x0) // MMU Command Register -#define LAN91X_PNR MakeRegister (2, 0x2) // Packet Number Register -#define LAN91X_ARR MakeRegister (2, 0x3) // Allocation Result Register -#define LAN91X_FIFO MakeRegister (2, 0x4) // FIFO Ports Register -#define LAN91X_PTR MakeRegister (2, 0x6) // Pointer Register -#define LAN91X_DATA0 MakeRegister (2, 0x8) // Data Register 0 -#define LAN91X_DATA1 MakeRegister (2, 0x9) // Data Register 1 -#define LAN91X_DATA2 MakeRegister (2, 0xa) // Data Register 2 -#define LAN91X_DATA3 MakeRegister (2, 0xb) // Data Register 3 -#define LAN91X_IST MakeRegister (2, 0xc) // Interrupt Status Register -#define LAN91X_MSK MakeRegister (2, 0xd) // Interrupt Mask Register - -#define LAN91X_MT0 MakeRegister (3, 0x0) // Multicast Table Register 0 -#define LAN91X_MT1 MakeRegister (3, 0x1) // Multicast Table Register 1 -#define LAN91X_MT2 MakeRegister (3, 0x2) // Multicast Table Register 2 -#define LAN91X_MT3 MakeRegister (3, 0x3) // Multicast Table Register 3 -#define LAN91X_MT4 MakeRegister (3, 0x4) // Multicast Table Register 4 -#define LAN91X_MT5 MakeRegister (3, 0x5) // Multicast Table Register 5 -#define LAN91X_MT6 MakeRegister (3, 0x6) // Multicast Table Register 6 -#define LAN91X_MT7 MakeRegister (3, 0x7) // Multicast Table Register 7 -#define LAN91X_MGMT MakeRegister (3, 0x8) // Management Interface Register -#define LAN91X_REV MakeRegister (3, 0xa) // Revision Register -#define LAN91X_RCV MakeRegister (3, 0xc) // RCV Register - -// Transmit Control Register Bits -#define TCR_TXENA BIT0 -#define TCR_LOOP BIT1 -#define TCR_FORCOL BIT2 -#define TCR_PAD_EN BIT7 -#define TCR_NOCRC BIT8 -#define TCR_MON_CSN BIT10 -#define TCR_FDUPLX BIT11 -#define TCR_STP_SQET BIT12 -#define TCR_EPH_LOOP BIT13 -#define TCR_SWFDUP BIT15 - -#define TCR_DEFAULT (TCR_TXENA | TCR_PAD_EN) -#define TCR_CLEAR 0x0 - -// EPH Status Register Bits -#define EPHSR_TX_SUC BIT0 -#define EPHSR_SNGLCOL BIT1 -#define EPHSR_MULCOL BIT2 -#define EPHSR_LTX_MULT BIT3 -#define EPHSR_16COL BIT4 -#define EPHSR_SQET BIT5 -#define EPHSR_LTX_BRD BIT6 -#define EPHSR_TX_DEFR BIT7 -#define EPHSR_LATCOL BIT9 -#define EPHSR_LOST_CARR BIT10 -#define EPHSR_EXC_DEF BIT11 -#define EPHSR_CTR_ROL BIT12 -#define EPHSR_LINK_OK BIT14 - -// Receive Control Register Bits -#define RCR_RX_ABORT BIT0 -#define RCR_PRMS BIT1 -#define RCR_ALMUL BIT2 -#define RCR_RXEN BIT8 -#define RCR_STRIP_CRC BIT9 -#define RCR_ABORT_ENB BIT13 -#define RCR_FILT_CAR BIT14 -#define RCR_SOFT_RST BIT15 - -#define RCR_DEFAULT (RCR_STRIP_CRC | RCR_RXEN) -#define RCR_CLEAR 0x0 - -// Receive/Phy Control Register Bits -#define RPCR_LS0B BIT2 -#define RPCR_LS1B BIT3 -#define RPCR_LS2B BIT4 -#define RPCR_LS0A BIT5 -#define RPCR_LS1A BIT6 -#define RPCR_LS2A BIT7 -#define RPCR_ANEG BIT11 -#define RPCR_DPLX BIT12 -#define RPCR_SPEED BIT13 - -// Configuration Register Bits -#define CR_EXT_PHY BIT9 -#define CR_GPCNTRL BIT10 -#define CR_NO_WAIT BIT12 -#define CR_EPH_POWER_EN BIT15 - -#define CR_DEFAULT (CR_EPH_POWER_EN | CR_NO_WAIT) - -// Control Register Bits -#define CTR_STORE BIT0 -#define CTR_RELOAD BIT1 -#define CTR_EEPROM_SEL BIT2 -#define CTR_TE_ENABLE BIT5 -#define CTR_CR_ENABLE BIT6 -#define CTR_LE_ENABLE BIT7 -#define CTR_AUTO_REL BIT11 -#define CTR_RCV_BAD BIT14 - -#define CTR_RESERVED (BIT12 | BIT9 | BIT4) -#define CTR_DEFAULT (CTR_RESERVED | CTR_AUTO_REL) - -// MMU Command Register Bits -#define MMUCR_BUSY BIT0 - -// MMU Command Register Operaction Codes -#define MMUCR_OP_NOOP (0 << 5) // No operation -#define MMUCR_OP_TX_ALLOC (1 << 5) // Allocate memory for TX -#define MMUCR_OP_RESET_MMU (2 << 5) // Reset MMU to initial state -#define MMUCR_OP_RX_POP (3 << 5) // Remove frame from top of RX FIFO -#define MMUCR_OP_RX_POP_REL (4 << 5) // Remove and release frame from top of RX FIFO -#define MMUCR_OP_RX_REL (5 << 5) // Release specific RX frame -#define MMUCR_OP_TX_PUSH (6 << 5) // Enqueue packet number into TX FIFO -#define MMUCR_OP_TX_RESET (7 << 5) // Reset TX FIFOs - -// Packet Number Register Bits -#define PNR_PACKET (0x3f) - -// Allocation Result Register Bits -#define ARR_PACKET (0x3f) -#define ARR_FAILED BIT7 - -// FIFO Ports Register Bits -#define FIFO_TX_PACKET (0x003f) -#define FIFO_TEMPTY BIT7 -#define FIFO_RX_PACKET (0x3f00) -#define FIFO_REMPTY BIT15 - -// Pointer Register Bits -#define PTR_POINTER (0x07ff) -#define PTR_NOT_EMPTY BIT11 -#define PTR_READ BIT13 -#define PTR_AUTO_INCR BIT14 -#define PTR_RCV BIT15 - -// Interupt Status and Mask Register Bits -#define IST_RCV BIT0 -#define IST_TX BIT1 -#define IST_TX_EMPTY BIT2 -#define IST_ALLOC BIT3 -#define IST_RX_OVRN BIT4 -#define IST_EPH BIT5 -#define IST_MD BIT7 - -// Management Interface -#define MGMT_MDO BIT0 -#define MGMT_MDI BIT1 -#define MGMT_MCLK BIT2 -#define MGMT_MDOE BIT3 -#define MGMT_MSK_CRS100 BIT14 - -// RCV Register -#define RCV_MBO (0x1f) -#define RCV_RCV_DISCRD BIT7 - -// Packet RX Status word bits -#define RX_MULTICAST BIT0 -#define RX_HASH (0x7e) -#define RX_TOO_SHORT BIT10 -#define RX_TOO_LONG BIT11 -#define RX_ODD_FRAME BIT12 -#define RX_BAD_CRC BIT13 -#define RX_BROADCAST BIT14 -#define RX_ALGN_ERR BIT15 - -// Packet Byte Count word bits -#define BCW_COUNT (0x7fe) - -// Packet Control Word bits -#define PCW_ODD_BYTE (0x00ff) -#define PCW_CRC BIT12 -#define PCW_ODD BIT13 - -/*--------------------------------------------------------------------------------------------------------------------- - - SMSC PHY Registers - - Most of these should be common, as there is - documented STANDARD for PHY registers! - ----------------------------------------------------------------------------------------------------------------------*/ -// -// PHY Register Numbers -// -#define PHY_INDEX_BASIC_CTRL 0 -#define PHY_INDEX_BASIC_STATUS 1 -#define PHY_INDEX_ID1 2 -#define PHY_INDEX_ID2 3 -#define PHY_INDEX_AUTO_NEG_ADVERT 4 -#define PHY_INDEX_AUTO_NEG_LINK_ABILITY 5 - -#define PHY_INDEX_CONFIG1 16 -#define PHY_INDEX_CONFIG2 17 -#define PHY_INDEX_STATUS_OUTPUT 18 -#define PHY_INDEX_MASK 19 - - -// PHY control register bits -#define PHYCR_COLL_TEST BIT7 // Collision test enable -#define PHYCR_DUPLEX_MODE BIT8 // Set Duplex Mode -#define PHYCR_RST_AUTO BIT9 // Restart Auto-Negotiation of Link abilities -#define PHYCR_PD BIT11 // Power-Down switch -#define PHYCR_AUTO_EN BIT12 // Auto-Negotiation Enable -#define PHYCR_SPEED_SEL BIT13 // Link Speed Selection -#define PHYCR_LOOPBK BIT14 // Set loopback mode -#define PHYCR_RESET BIT15 // Do a PHY reset - -// PHY status register bits -#define PHYSTS_EXT_CAP BIT0 // Extended Capabilities Register capability -#define PHYSTS_JABBER BIT1 // Jabber condition detected -#define PHYSTS_LINK_STS BIT2 // Link Status -#define PHYSTS_AUTO_CAP BIT3 // Auto-Negotiation Capability -#define PHYSTS_REMOTE_FAULT BIT4 // Remote fault detected -#define PHYSTS_AUTO_COMP BIT5 // Auto-Negotiation Completed -#define PHYSTS_10BASET_HDPLX BIT11 // 10Mbps Half-Duplex ability -#define PHYSTS_10BASET_FDPLX BIT12 // 10Mbps Full-Duplex ability -#define PHYSTS_100BASETX_HDPLX BIT13 // 100Mbps Half-Duplex ability -#define PHYSTS_100BASETX_FDPLX BIT14 // 100Mbps Full-Duplex ability -#define PHYSTS_100BASE_T4 BIT15 // Base T4 ability - -// PHY Auto-Negotiation advertisement -#define PHYANA_SEL_MASK ((UINT32)0x1F) // Link type selector -#define PHYANA_CSMA BIT0 // Advertise CSMA capability -#define PHYANA_10BASET BIT5 // Advertise 10BASET capability -#define PHYANA_10BASETFD BIT6 // Advertise 10BASET Full duplex capability -#define PHYANA_100BASETX BIT7 // Advertise 100BASETX capability -#define PHYANA_100BASETXFD BIT8 // Advertise 100 BASETX Full duplex capability -#define PHYANA_100BASET4 BIT9 // Advertise 100 BASETX Full duplex capability -#define PHYANA_PAUSE_OP_MASK (3 << 10) // Advertise PAUSE frame capability -#define PHYANA_REMOTE_FAULT BIT13 // Remote fault detected - -#endif /* __LAN91XDXEHW_H__ */ +/** @file
+* SMSC LAN91x series Network Controller Driver.
+*
+* Copyright (c) 2013 Linaro.org
+*
+* This program and the accompanying materials are licensed and
+* made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license
+* may be found at: http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __LAN91XDXEHW_H__
+#define __LAN91XDXEHW_H__
+
+#include <Base.h>
+
+#define MakeRegister(Bank, Offset) (((Bank) << 8) | (Offset))
+#define RegisterToBank(Register) (((Register) >> 8) & 0x07)
+#define RegisterToOffset(Register) ((Register) & 0x0f)
+
+/*---------------------------------------------------------------------------------------------------------------------
+
+ SMSC LAN91x Registers
+
+---------------------------------------------------------------------------------------------------------------------*/
+#define LAN91X_BANK_OFFSET 0xe // Bank Select Register (all banks)
+
+#define LAN91X_TCR MakeRegister (0, 0x0) // Transmit Control Register
+#define LAN91X_EPHSR MakeRegister (0, 0x2) // EPH Status Register
+#define LAN91X_RCR MakeRegister (0, 0x4) // Receive Control Register
+#define LAN91X_ECR MakeRegister (0, 0x6) // Counter Register
+#define LAN91X_MIR MakeRegister (0, 0x8) // Memory Information Register
+#define LAN91X_RPCR MakeRegister (0, 0xa) // Receive/Phy Control Register
+
+#define LAN91X_CR MakeRegister (1, 0x0) // Configuration Register
+#define LAN91X_BAR MakeRegister (1, 0x2) // Base Address Register
+#define LAN91X_IAR0 MakeRegister (1, 0x4) // Individual Address Register 0
+#define LAN91X_IAR1 MakeRegister (1, 0x5) // Individual Address Register 1
+#define LAN91X_IAR2 MakeRegister (1, 0x6) // Individual Address Register 2
+#define LAN91X_IAR3 MakeRegister (1, 0x7) // Individual Address Register 3
+#define LAN91X_IAR4 MakeRegister (1, 0x8) // Individual Address Register 4
+#define LAN91X_IAR5 MakeRegister (1, 0x9) // Individual Address Register 5
+#define LAN91X_GPR MakeRegister (1, 0xa) // General Purpose Register
+#define LAN91X_CTR MakeRegister (1, 0xc) // Control Register
+
+#define LAN91X_MMUCR MakeRegister (2, 0x0) // MMU Command Register
+#define LAN91X_PNR MakeRegister (2, 0x2) // Packet Number Register
+#define LAN91X_ARR MakeRegister (2, 0x3) // Allocation Result Register
+#define LAN91X_FIFO MakeRegister (2, 0x4) // FIFO Ports Register
+#define LAN91X_PTR MakeRegister (2, 0x6) // Pointer Register
+#define LAN91X_DATA0 MakeRegister (2, 0x8) // Data Register 0
+#define LAN91X_DATA1 MakeRegister (2, 0x9) // Data Register 1
+#define LAN91X_DATA2 MakeRegister (2, 0xa) // Data Register 2
+#define LAN91X_DATA3 MakeRegister (2, 0xb) // Data Register 3
+#define LAN91X_IST MakeRegister (2, 0xc) // Interrupt Status Register
+#define LAN91X_MSK MakeRegister (2, 0xd) // Interrupt Mask Register
+
+#define LAN91X_MT0 MakeRegister (3, 0x0) // Multicast Table Register 0
+#define LAN91X_MT1 MakeRegister (3, 0x1) // Multicast Table Register 1
+#define LAN91X_MT2 MakeRegister (3, 0x2) // Multicast Table Register 2
+#define LAN91X_MT3 MakeRegister (3, 0x3) // Multicast Table Register 3
+#define LAN91X_MT4 MakeRegister (3, 0x4) // Multicast Table Register 4
+#define LAN91X_MT5 MakeRegister (3, 0x5) // Multicast Table Register 5
+#define LAN91X_MT6 MakeRegister (3, 0x6) // Multicast Table Register 6
+#define LAN91X_MT7 MakeRegister (3, 0x7) // Multicast Table Register 7
+#define LAN91X_MGMT MakeRegister (3, 0x8) // Management Interface Register
+#define LAN91X_REV MakeRegister (3, 0xa) // Revision Register
+#define LAN91X_RCV MakeRegister (3, 0xc) // RCV Register
+
+// Transmit Control Register Bits
+#define TCR_TXENA BIT0
+#define TCR_LOOP BIT1
+#define TCR_FORCOL BIT2
+#define TCR_PAD_EN BIT7
+#define TCR_NOCRC BIT8
+#define TCR_MON_CSN BIT10
+#define TCR_FDUPLX BIT11
+#define TCR_STP_SQET BIT12
+#define TCR_EPH_LOOP BIT13
+#define TCR_SWFDUP BIT15
+
+#define TCR_DEFAULT (TCR_TXENA | TCR_PAD_EN)
+#define TCR_CLEAR 0x0
+
+// EPH Status Register Bits
+#define EPHSR_TX_SUC BIT0
+#define EPHSR_SNGLCOL BIT1
+#define EPHSR_MULCOL BIT2
+#define EPHSR_LTX_MULT BIT3
+#define EPHSR_16COL BIT4
+#define EPHSR_SQET BIT5
+#define EPHSR_LTX_BRD BIT6
+#define EPHSR_TX_DEFR BIT7
+#define EPHSR_LATCOL BIT9
+#define EPHSR_LOST_CARR BIT10
+#define EPHSR_EXC_DEF BIT11
+#define EPHSR_CTR_ROL BIT12
+#define EPHSR_LINK_OK BIT14
+
+// Receive Control Register Bits
+#define RCR_RX_ABORT BIT0
+#define RCR_PRMS BIT1
+#define RCR_ALMUL BIT2
+#define RCR_RXEN BIT8
+#define RCR_STRIP_CRC BIT9
+#define RCR_ABORT_ENB BIT13
+#define RCR_FILT_CAR BIT14
+#define RCR_SOFT_RST BIT15
+
+#define RCR_DEFAULT (RCR_STRIP_CRC | RCR_RXEN)
+#define RCR_CLEAR 0x0
+
+// Receive/Phy Control Register Bits
+#define RPCR_LS0B BIT2
+#define RPCR_LS1B BIT3
+#define RPCR_LS2B BIT4
+#define RPCR_LS0A BIT5
+#define RPCR_LS1A BIT6
+#define RPCR_LS2A BIT7
+#define RPCR_ANEG BIT11
+#define RPCR_DPLX BIT12
+#define RPCR_SPEED BIT13
+
+// Configuration Register Bits
+#define CR_EXT_PHY BIT9
+#define CR_GPCNTRL BIT10
+#define CR_NO_WAIT BIT12
+#define CR_EPH_POWER_EN BIT15
+
+#define CR_DEFAULT (CR_EPH_POWER_EN | CR_NO_WAIT)
+
+// Control Register Bits
+#define CTR_STORE BIT0
+#define CTR_RELOAD BIT1
+#define CTR_EEPROM_SEL BIT2
+#define CTR_TE_ENABLE BIT5
+#define CTR_CR_ENABLE BIT6
+#define CTR_LE_ENABLE BIT7
+#define CTR_AUTO_REL BIT11
+#define CTR_RCV_BAD BIT14
+
+#define CTR_RESERVED (BIT12 | BIT9 | BIT4)
+#define CTR_DEFAULT (CTR_RESERVED | CTR_AUTO_REL)
+
+// MMU Command Register Bits
+#define MMUCR_BUSY BIT0
+
+// MMU Command Register Operaction Codes
+#define MMUCR_OP_NOOP (0 << 5) // No operation
+#define MMUCR_OP_TX_ALLOC (1 << 5) // Allocate memory for TX
+#define MMUCR_OP_RESET_MMU (2 << 5) // Reset MMU to initial state
+#define MMUCR_OP_RX_POP (3 << 5) // Remove frame from top of RX FIFO
+#define MMUCR_OP_RX_POP_REL (4 << 5) // Remove and release frame from top of RX FIFO
+#define MMUCR_OP_RX_REL (5 << 5) // Release specific RX frame
+#define MMUCR_OP_TX_PUSH (6 << 5) // Enqueue packet number into TX FIFO
+#define MMUCR_OP_TX_RESET (7 << 5) // Reset TX FIFOs
+
+// Packet Number Register Bits
+#define PNR_PACKET (0x3f)
+
+// Allocation Result Register Bits
+#define ARR_PACKET (0x3f)
+#define ARR_FAILED BIT7
+
+// FIFO Ports Register Bits
+#define FIFO_TX_PACKET (0x003f)
+#define FIFO_TEMPTY BIT7
+#define FIFO_RX_PACKET (0x3f00)
+#define FIFO_REMPTY BIT15
+
+// Pointer Register Bits
+#define PTR_POINTER (0x07ff)
+#define PTR_NOT_EMPTY BIT11
+#define PTR_READ BIT13
+#define PTR_AUTO_INCR BIT14
+#define PTR_RCV BIT15
+
+// Interupt Status and Mask Register Bits
+#define IST_RCV BIT0
+#define IST_TX BIT1
+#define IST_TX_EMPTY BIT2
+#define IST_ALLOC BIT3
+#define IST_RX_OVRN BIT4
+#define IST_EPH BIT5
+#define IST_MD BIT7
+
+// Management Interface
+#define MGMT_MDO BIT0
+#define MGMT_MDI BIT1
+#define MGMT_MCLK BIT2
+#define MGMT_MDOE BIT3
+#define MGMT_MSK_CRS100 BIT14
+
+// RCV Register
+#define RCV_MBO (0x1f)
+#define RCV_RCV_DISCRD BIT7
+
+// Packet RX Status word bits
+#define RX_MULTICAST BIT0
+#define RX_HASH (0x7e)
+#define RX_TOO_SHORT BIT10
+#define RX_TOO_LONG BIT11
+#define RX_ODD_FRAME BIT12
+#define RX_BAD_CRC BIT13
+#define RX_BROADCAST BIT14
+#define RX_ALGN_ERR BIT15
+
+// Packet Byte Count word bits
+#define BCW_COUNT (0x7fe)
+
+// Packet Control Word bits
+#define PCW_ODD_BYTE (0x00ff)
+#define PCW_CRC BIT12
+#define PCW_ODD BIT13
+
+/*---------------------------------------------------------------------------------------------------------------------
+
+ SMSC PHY Registers
+
+ Most of these should be common, as there is
+ documented STANDARD for PHY registers!
+
+---------------------------------------------------------------------------------------------------------------------*/
+//
+// PHY Register Numbers
+//
+#define PHY_INDEX_BASIC_CTRL 0
+#define PHY_INDEX_BASIC_STATUS 1
+#define PHY_INDEX_ID1 2
+#define PHY_INDEX_ID2 3
+#define PHY_INDEX_AUTO_NEG_ADVERT 4
+#define PHY_INDEX_AUTO_NEG_LINK_ABILITY 5
+
+#define PHY_INDEX_CONFIG1 16
+#define PHY_INDEX_CONFIG2 17
+#define PHY_INDEX_STATUS_OUTPUT 18
+#define PHY_INDEX_MASK 19
+
+
+// PHY control register bits
+#define PHYCR_COLL_TEST BIT7 // Collision test enable
+#define PHYCR_DUPLEX_MODE BIT8 // Set Duplex Mode
+#define PHYCR_RST_AUTO BIT9 // Restart Auto-Negotiation of Link abilities
+#define PHYCR_PD BIT11 // Power-Down switch
+#define PHYCR_AUTO_EN BIT12 // Auto-Negotiation Enable
+#define PHYCR_SPEED_SEL BIT13 // Link Speed Selection
+#define PHYCR_LOOPBK BIT14 // Set loopback mode
+#define PHYCR_RESET BIT15 // Do a PHY reset
+
+// PHY status register bits
+#define PHYSTS_EXT_CAP BIT0 // Extended Capabilities Register capability
+#define PHYSTS_JABBER BIT1 // Jabber condition detected
+#define PHYSTS_LINK_STS BIT2 // Link Status
+#define PHYSTS_AUTO_CAP BIT3 // Auto-Negotiation Capability
+#define PHYSTS_REMOTE_FAULT BIT4 // Remote fault detected
+#define PHYSTS_AUTO_COMP BIT5 // Auto-Negotiation Completed
+#define PHYSTS_10BASET_HDPLX BIT11 // 10Mbps Half-Duplex ability
+#define PHYSTS_10BASET_FDPLX BIT12 // 10Mbps Full-Duplex ability
+#define PHYSTS_100BASETX_HDPLX BIT13 // 100Mbps Half-Duplex ability
+#define PHYSTS_100BASETX_FDPLX BIT14 // 100Mbps Full-Duplex ability
+#define PHYSTS_100BASE_T4 BIT15 // Base T4 ability
+
+// PHY Auto-Negotiation advertisement
+#define PHYANA_SEL_MASK ((UINT32)0x1F) // Link type selector
+#define PHYANA_CSMA BIT0 // Advertise CSMA capability
+#define PHYANA_10BASET BIT5 // Advertise 10BASET capability
+#define PHYANA_10BASETFD BIT6 // Advertise 10BASET Full duplex capability
+#define PHYANA_100BASETX BIT7 // Advertise 100BASETX capability
+#define PHYANA_100BASETXFD BIT8 // Advertise 100 BASETX Full duplex capability
+#define PHYANA_100BASET4 BIT9 // Advertise 100 BASETX Full duplex capability
+#define PHYANA_PAUSE_OP_MASK (3 << 10) // Advertise PAUSE frame capability
+#define PHYANA_REMOTE_FAULT BIT13 // Remote fault detected
+
+#endif /* __LAN91XDXEHW_H__ */
|