From 58c559e6509f276d0afb4621b2122e994e70160c Mon Sep 17 00:00:00 2001 From: Ramneek Mehresh Date: Tue, 20 Mar 2012 10:35:50 +0530 Subject: fsl/usb: Add controller version based ULPI and UTMI phy support Add support for ULPI and UTMI PHYs based on usb controller version info read from device-tree Example of USB Controller versioning info: Version 1.2 and below : MPC8536, MPC8315, etc Version 1.6 : P1020, P1010, P2020, P5020, etc Version 2.2 : PSC9131, PSC9132, P3060, etc No changes for non-DT users Signed-off-by: Ramneek Mehresh Acked-by: Li Yang Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-fsl.c | 35 ++++++++++++++++++++++++++++------- 1 file changed, 28 insertions(+), 7 deletions(-) (limited to 'drivers/usb/host/ehci-fsl.c') diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 3e7345172e03..653e577ab3ee 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -1,6 +1,6 @@ /* * Copyright 2005-2009 MontaVista Software, Inc. - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008,2012 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -211,19 +211,32 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd, usb_put_hcd(hcd); } -static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, +static void ehci_fsl_setup_phy(struct usb_hcd *hcd, enum fsl_usb2_phy_modes phy_mode, unsigned int port_offset) { - u32 portsc; - struct usb_hcd *hcd = ehci_to_hcd(ehci); + u32 portsc, temp; + struct ehci_hcd *ehci = hcd_to_ehci(hcd); void __iomem *non_ehci = hcd->regs; + struct device *dev = hcd->self.controller; + struct fsl_usb2_platform_data *pdata = dev->platform_data; + + if (pdata->controller_ver < 0) { + dev_warn(hcd->self.controller, "Could not get controller version\n"); + return; + } portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]); portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW); switch (phy_mode) { case FSL_USB2_PHY_ULPI: + if (pdata->controller_ver) { + /* controller version 1.6 or above */ + temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); + out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | + USB_CTRL_USB_EN | ULPI_PHY_CLK_SEL); + } portsc |= PORT_PTS_ULPI; break; case FSL_USB2_PHY_SERIAL: @@ -233,6 +246,14 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, portsc |= PORT_PTS_PTW; /* fall through */ case FSL_USB2_PHY_UTMI: + if (pdata->controller_ver) { + /* controller version 1.6 or above */ + temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); + out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | + UTMI_PHY_EN | USB_CTRL_USB_EN); + mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to + become stable - 10ms*/ + } /* enable UTMI PHY */ setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN); portsc |= PORT_PTS_UTMI; @@ -271,7 +292,7 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) if ((pdata->operating_mode == FSL_USB2_DR_HOST) || (pdata->operating_mode == FSL_USB2_DR_OTG)) - ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0); + ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0); if (pdata->operating_mode == FSL_USB2_MPH_HOST) { unsigned int chip, rev, svr; @@ -285,9 +306,9 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) ehci->has_fsl_port_bug = 1; if (pdata->port_enables & FSL_USB2_PORT0_ENABLED) - ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0); + ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0); if (pdata->port_enables & FSL_USB2_PORT1_ENABLED) - ehci_fsl_setup_phy(ehci, pdata->phy_mode, 1); + ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1); } if (pdata->have_sysif_regs) { -- cgit v1.2.3