From 3ca2a3211ee5078d49b04fe7149ff2a76473be51 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 16 Jan 2007 11:56:32 -0500 Subject: UHCI: fix bandwidth allocation This patch (as840) fixes the bandwidth allocation mechanism in uhci-hcd. It has never worked correctly. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-q.c | 241 +++++++++++++++++++++++++++++++++------------- 1 file changed, 175 insertions(+), 66 deletions(-) (limited to 'drivers/usb/host/uhci-q.c') diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 5afcc5227284..2cbb239e63f8 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -261,6 +261,14 @@ static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci, qh->udev = udev; hep->hcpriv = qh; + if (qh->type == USB_ENDPOINT_XFER_INT || + qh->type == USB_ENDPOINT_XFER_ISOC) + qh->load = usb_calc_bus_time(udev->speed, + usb_endpoint_dir_in(&hep->desc), + qh->type == USB_ENDPOINT_XFER_ISOC, + le16_to_cpu(hep->desc.wMaxPacketSize)) + / 1000 + 1; + } else { /* Skeleton QH */ qh->state = QH_STATE_ACTIVE; qh->type = -1; @@ -496,6 +504,121 @@ static void uhci_make_qh_idle(struct uhci_hcd *uhci, struct uhci_qh *qh) wake_up_all(&uhci->waitqh); } +/* + * Find the highest existing bandwidth load for a given phase and period. + */ +static int uhci_highest_load(struct uhci_hcd *uhci, int phase, int period) +{ + int highest_load = uhci->load[phase]; + + for (phase += period; phase < MAX_PHASE; phase += period) + highest_load = max_t(int, highest_load, uhci->load[phase]); + return highest_load; +} + +/* + * Set qh->phase to the optimal phase for a periodic transfer and + * check whether the bandwidth requirement is acceptable. + */ +static int uhci_check_bandwidth(struct uhci_hcd *uhci, struct uhci_qh *qh) +{ + int minimax_load; + + /* Find the optimal phase (unless it is already set) and get + * its load value. */ + if (qh->phase >= 0) + minimax_load = uhci_highest_load(uhci, qh->phase, qh->period); + else { + int phase, load; + int max_phase = min_t(int, MAX_PHASE, qh->period); + + qh->phase = 0; + minimax_load = uhci_highest_load(uhci, qh->phase, qh->period); + for (phase = 1; phase < max_phase; ++phase) { + load = uhci_highest_load(uhci, phase, qh->period); + if (load < minimax_load) { + minimax_load = load; + qh->phase = phase; + } + } + } + + /* Maximum allowable periodic bandwidth is 90%, or 900 us per frame */ + if (minimax_load + qh->load > 900) { + dev_dbg(uhci_dev(uhci), "bandwidth allocation failed: " + "period %d, phase %d, %d + %d us\n", + qh->period, qh->phase, minimax_load, qh->load); + return -ENOSPC; + } + return 0; +} + +/* + * Reserve a periodic QH's bandwidth in the schedule + */ +static void uhci_reserve_bandwidth(struct uhci_hcd *uhci, struct uhci_qh *qh) +{ + int i; + int load = qh->load; + char *p = "??"; + + for (i = qh->phase; i < MAX_PHASE; i += qh->period) { + uhci->load[i] += load; + uhci->total_load += load; + } + uhci_to_hcd(uhci)->self.bandwidth_allocated = + uhci->total_load / MAX_PHASE; + switch (qh->type) { + case USB_ENDPOINT_XFER_INT: + ++uhci_to_hcd(uhci)->self.bandwidth_int_reqs; + p = "INT"; + break; + case USB_ENDPOINT_XFER_ISOC: + ++uhci_to_hcd(uhci)->self.bandwidth_isoc_reqs; + p = "ISO"; + break; + } + qh->bandwidth_reserved = 1; + dev_dbg(uhci_dev(uhci), + "%s dev %d ep%02x-%s, period %d, phase %d, %d us\n", + "reserve", qh->udev->devnum, + qh->hep->desc.bEndpointAddress, p, + qh->period, qh->phase, load); +} + +/* + * Release a periodic QH's bandwidth reservation + */ +static void uhci_release_bandwidth(struct uhci_hcd *uhci, struct uhci_qh *qh) +{ + int i; + int load = qh->load; + char *p = "??"; + + for (i = qh->phase; i < MAX_PHASE; i += qh->period) { + uhci->load[i] -= load; + uhci->total_load -= load; + } + uhci_to_hcd(uhci)->self.bandwidth_allocated = + uhci->total_load / MAX_PHASE; + switch (qh->type) { + case USB_ENDPOINT_XFER_INT: + --uhci_to_hcd(uhci)->self.bandwidth_int_reqs; + p = "INT"; + break; + case USB_ENDPOINT_XFER_ISOC: + --uhci_to_hcd(uhci)->self.bandwidth_isoc_reqs; + p = "ISO"; + break; + } + qh->bandwidth_reserved = 0; + dev_dbg(uhci_dev(uhci), + "%s dev %d ep%02x-%s, period %d, phase %d, %d us\n", + "release", qh->udev->devnum, + qh->hep->desc.bEndpointAddress, p, + qh->period, qh->phase, load); +} + static inline struct urb_priv *uhci_alloc_urb_priv(struct uhci_hcd *uhci, struct urb *urb) { @@ -799,7 +922,6 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, wmb(); qh->dummy_td->status |= __constant_cpu_to_le32(TD_CTRL_ACTIVE); qh->dummy_td = td; - qh->period = urb->interval; usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), toggle); @@ -830,28 +952,42 @@ static inline int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb, static int uhci_submit_interrupt(struct uhci_hcd *uhci, struct urb *urb, struct uhci_qh *qh) { - int exponent; + int ret; /* USB 1.1 interrupt transfers only involve one packet per interval. * Drivers can submit URBs of any length, but longer ones will need * multiple intervals to complete. */ - /* Figure out which power-of-two queue to use */ - for (exponent = 7; exponent >= 0; --exponent) { - if ((1 << exponent) <= urb->interval) - break; - } - if (exponent < 0) - return -EINVAL; - urb->interval = 1 << exponent; + if (!qh->bandwidth_reserved) { + int exponent; - if (qh->period == 0) + /* Figure out which power-of-two queue to use */ + for (exponent = 7; exponent >= 0; --exponent) { + if ((1 << exponent) <= urb->interval) + break; + } + if (exponent < 0) + return -EINVAL; + qh->period = 1 << exponent; qh->skel = uhci->skelqh[UHCI_SKEL_INDEX(exponent)]; - else if (qh->period != urb->interval) - return -EINVAL; /* Can't change the period */ - return uhci_submit_common(uhci, urb, qh); + /* For now, interrupt phase is fixed by the layout + * of the QH lists. */ + qh->phase = (qh->period / 2) & (MAX_PHASE - 1); + ret = uhci_check_bandwidth(uhci, qh); + if (ret) + return ret; + } else if (qh->period > urb->interval) + return -EINVAL; /* Can't decrease the period */ + + ret = uhci_submit_common(uhci, urb, qh); + if (ret == 0) { + urb->interval = qh->period; + if (!qh->bandwidth_reserved) + uhci_reserve_bandwidth(uhci, qh); + } + return ret; } /* @@ -998,15 +1134,32 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, return -EFBIG; /* Check the period and figure out the starting frame number */ - if (qh->period == 0) { + if (!qh->bandwidth_reserved) { + qh->period = urb->interval; if (urb->transfer_flags & URB_ISO_ASAP) { + qh->phase = -1; /* Find the best phase */ + i = uhci_check_bandwidth(uhci, qh); + if (i) + return i; + + /* Allow a little time to allocate the TDs */ uhci_get_current_frame_number(uhci); - urb->start_frame = uhci->frame_number + 10; + frame = uhci->frame_number + 10; + + /* Move forward to the first frame having the + * correct phase */ + urb->start_frame = frame + ((qh->phase - frame) & + (qh->period - 1)); } else { i = urb->start_frame - uhci->last_iso_frame; if (i <= 0 || i >= UHCI_NUMFRAMES) return -EINVAL; + qh->phase = urb->start_frame & (qh->period - 1); + i = uhci_check_bandwidth(uhci, qh); + if (i) + return i; } + } else if (qh->period != urb->interval) { return -EINVAL; /* Can't change the period */ @@ -1052,9 +1205,6 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, /* Set the interrupt-on-completion flag on the last packet. */ td->status |= __constant_cpu_to_le32(TD_CTRL_IOC); - qh->skel = uhci->skel_iso_qh; - qh->period = urb->interval; - /* Add the TDs to the frame list */ frame = urb->start_frame; list_for_each_entry(td, &urbp->td_list, list) { @@ -1068,6 +1218,9 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, qh->iso_status = 0; } + qh->skel = uhci->skel_iso_qh; + if (!qh->bandwidth_reserved) + uhci_reserve_bandwidth(uhci, qh); return 0; } @@ -1122,7 +1275,6 @@ static int uhci_urb_enqueue(struct usb_hcd *hcd, unsigned long flags; struct urb_priv *urbp; struct uhci_qh *qh; - int bustime; spin_lock_irqsave(&uhci->lock, flags); @@ -1152,35 +1304,11 @@ static int uhci_urb_enqueue(struct usb_hcd *hcd, ret = uhci_submit_bulk(uhci, urb, qh); break; case USB_ENDPOINT_XFER_INT: - if (list_empty(&qh->queue)) { - bustime = usb_check_bandwidth(urb->dev, urb); - if (bustime < 0) - ret = bustime; - else { - ret = uhci_submit_interrupt(uhci, urb, qh); - if (ret == 0) - usb_claim_bandwidth(urb->dev, urb, bustime, 0); - } - } else { /* inherit from parent */ - struct urb_priv *eurbp; - - eurbp = list_entry(qh->queue.prev, struct urb_priv, - node); - urb->bandwidth = eurbp->urb->bandwidth; - ret = uhci_submit_interrupt(uhci, urb, qh); - } + ret = uhci_submit_interrupt(uhci, urb, qh); break; case USB_ENDPOINT_XFER_ISOC: urb->error_count = 0; - bustime = usb_check_bandwidth(urb->dev, urb); - if (bustime < 0) { - ret = bustime; - break; - } - ret = uhci_submit_isochronous(uhci, urb, qh); - if (ret == 0) - usb_claim_bandwidth(urb->dev, urb, bustime, 1); break; } if (ret != 0) @@ -1277,24 +1405,6 @@ __acquires(uhci->lock) uhci_free_urb_priv(uhci, urbp); - switch (qh->type) { - case USB_ENDPOINT_XFER_ISOC: - /* Release bandwidth for Interrupt or Isoc. transfers */ - if (urb->bandwidth) - usb_release_bandwidth(urb->dev, urb, 1); - break; - case USB_ENDPOINT_XFER_INT: - /* Release bandwidth for Interrupt or Isoc. transfers */ - /* Make sure we don't release if we have a queued URB */ - if (list_empty(&qh->queue) && urb->bandwidth) - usb_release_bandwidth(urb->dev, urb, 0); - else - /* bandwidth was passed on to queued URB, */ - /* so don't let usb_unlink_urb() release it */ - urb->bandwidth = 0; - break; - } - spin_unlock(&uhci->lock); usb_hcd_giveback_urb(uhci_to_hcd(uhci), urb); spin_lock(&uhci->lock); @@ -1303,9 +1413,8 @@ __acquires(uhci->lock) * reserved bandwidth. */ if (list_empty(&qh->queue)) { uhci_unlink_qh(uhci, qh); - - /* Bandwidth stuff not yet implemented */ - qh->period = 0; + if (qh->bandwidth_reserved) + uhci_release_bandwidth(uhci, qh); } } -- cgit v1.2.3