From f82b86267a7a7cc2fc9779fa2957467c242395d8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 5 Oct 2012 22:23:54 +0200 Subject: i2c-i801: Let i2c-mux-gpio find the GPIO chip Now that i2c-mux-gpio is able to find the GPIO chip by itself, we can delegate this task. The great thing here is that i2c-mux-gpio can defer device probing until the gpio chip is available, so we no longer depend on the module loading order. Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-i801.c | 37 ++++--------------------------------- 1 file changed, 4 insertions(+), 33 deletions(-) (limited to 'drivers/i2c/busses/i2c-i801.c') diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index bb1d7291cf21..37793156bd93 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -194,7 +194,6 @@ struct i801_priv { #if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE const struct i801_mux_config *mux_drvdata; - unsigned mux_priv[2]; struct platform_device *mux_pdev; #endif }; @@ -1008,60 +1007,32 @@ static struct dmi_system_id __devinitdata mux_dmi_table[] = { { } }; -static int __devinit match_gpio_chip_by_label(struct gpio_chip *chip, - void *data) -{ - return !strcmp(chip->label, data); -} - /* Setup multiplexing if needed */ static int __devinit i801_add_mux(struct i801_priv *priv) { struct device *dev = &priv->adapter.dev; const struct i801_mux_config *mux_config; - struct gpio_chip *gpio; struct i2c_mux_gpio_platform_data gpio_data; - int i, err; + int err; if (!priv->mux_drvdata) return 0; mux_config = priv->mux_drvdata; - /* Find GPIO chip */ - gpio = gpiochip_find(mux_config->gpio_chip, match_gpio_chip_by_label); - if (gpio) { - dev_info(dev, - "GPIO chip %s found, SMBus multiplexing enabled\n", - mux_config->gpio_chip); - } else { - dev_err(dev, - "GPIO chip %s not found, SMBus multiplexing disabled\n", - mux_config->gpio_chip); - return -ENODEV; - } - - /* Find absolute GPIO pin numbers */ - if (ARRAY_SIZE(priv->mux_priv) < mux_config->n_gpios) { - dev_err(dev, "i801_priv.mux_priv too small (%zu, need %d)\n", - ARRAY_SIZE(priv->mux_priv), mux_config->n_gpios); - return -ENODEV; - } - for (i = 0; i < mux_config->n_gpios; i++) - priv->mux_priv[i] = gpio->base + mux_config->gpios[i]; - /* Prepare the platform data */ memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data)); gpio_data.parent = priv->adapter.nr; gpio_data.values = mux_config->values; gpio_data.n_values = mux_config->n_values; gpio_data.classes = mux_config->classes; - gpio_data.gpios = priv->mux_priv; + gpio_data.gpio_chip = mux_config->gpio_chip; + gpio_data.gpios = mux_config->gpios; gpio_data.n_gpios = mux_config->n_gpios; gpio_data.idle = I2C_MUX_GPIO_NO_IDLE; /* Register the mux device */ priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio", - priv->mux_priv[0], &gpio_data, + PLATFORM_DEVID_AUTO, &gpio_data, sizeof(struct i2c_mux_gpio_platform_data)); if (IS_ERR(priv->mux_pdev)) { err = PTR_ERR(priv->mux_pdev); -- cgit v1.2.3