aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2018-09-29net: hp100: fix always-true check for link up stateColin Ian King
[ Upstream commit a7f38002fb69b44f8fc622ecb838665d0b8666af ] The operation ~(p100_inb(VG_LAN_CFG_1) & HP100_LINK_UP) returns a value that is always non-zero and hence the wait for the link to drop always terminates prematurely. Fix this by using a logical not operator instead of a bitwise complement. This issue has been in the driver since pre-2.6.12-rc2. Detected by CoverityScan, CID#114157 ("Logical vs. bitwise operator") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29net/appletalk: fix minor pointer leak to userspace in SIOCFINDIPDDPRTWilly Tarreau
[ Upstream commit 9824dfae5741275473a23a7ed5756c7b6efacc9d ] Fields ->dev and ->next of struct ipddp_route may be copied to userspace on the SIOCFINDIPDDPRT ioctl. This is only accessible to CAP_NET_ADMIN though. Let's manually copy the relevant fields instead of using memcpy(). BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html Cc: Jann Horn <jannh@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29xen/netfront: don't bug in case of too many fragsJuergen Gross
commit ad4f15dc2c70b1de5e0a64d27335962fbc9cf71c upstream. Commit 57f230ab04d291 ("xen/netfront: raise max number of slots in xennet_get_responses()") raised the max number of allowed slots by one. This seems to be problematic in some configurations with netback using a larger MAX_SKB_FRAGS value (e.g. old Linux kernel with MAX_SKB_FRAGS defined as 18 instead of nowadays 17). Instead of BUG_ON() in this case just fall back to retransmission. Fixes: 57f230ab04d291 ("xen/netfront: raise max number of slots in xennet_get_responses()") Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26drivers: net: cpsw: fix segfault in case of bad phy-handleDavid Rivshin
commit d733f7542ad47cf73e033c90cf55158587e1d060 upstream. If an emac node has a phy-handle property that points to something which is not a phy, then a segmentation fault will occur when the interface is brought up. This is because while phy_connect() will return ERR_PTR() on failure, of_phy_connect() will return NULL. The common error check uses IS_ERR(), and so missed when of_phy_connect() fails. The NULL pointer is then dereferenced. Also, the common error message referenced slave->data->phy_id, which would be empty in the case of phy-handle. Instead, use the name of the device_node as a useful identifier. And in the phy_id case add the error code for completeness. Fixes: 9e42f715264f ("drivers: net: cpsw: add phy-handle parsing") Signed-off-by: David Rivshin <drivshin@allworx.com> Signed-off-by: David S. Miller <davem@davemloft.net> [SZ Lin (林上智): Tweak the patch to use original print function of dev_info()] Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26xen/netfront: fix waiting for xenbus state changeJuergen Gross
commit 8edfe2e992b75aee3da9316e9697c531194c2f53 upstream. Commit 822fb18a82aba ("xen-netfront: wait xenbus state change when load module manually") added a new wait queue to wait on for a state change when the module is loaded manually. Unfortunately there is no wakeup anywhere to stop that waiting. Instead of introducing a new wait queue rename the existing module_unload_q to module_wq and use it for both purposes (loading and unloading). As any state change of the backend might be intended to stop waiting do the wake_up_all() in any case when netback_changed() is called. Fixes: 822fb18a82aba ("xen-netfront: wait xenbus state change when load module manually") Cc: <stable@vger.kernel.org> #4.18 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26xen-netfront: fix warn message as irq device name has '/'Xiao Liang
[ Upstream commit 21f2706b20100bb3db378461ab9b8e2035309b5b ] There is a call trace generated after commit 2d408c0d4574b01b9ed45e02516888bf925e11a9( xen-netfront: fix queue name setting). There is no 'device/vif/xx-q0-tx' file found under /proc/irq/xx/. This patch only picks up device type and id as its name. With the patch, now /proc/interrupts looks like below and the warning message gone: 70: 21 0 0 0 xen-dyn -event vif0-q0-tx 71: 15 0 0 0 xen-dyn -event vif0-q0-rx 72: 14 0 0 0 xen-dyn -event vif0-q1-tx 73: 33 0 0 0 xen-dyn -event vif0-q1-rx 74: 12 0 0 0 xen-dyn -event vif0-q2-tx 75: 24 0 0 0 xen-dyn -event vif0-q2-rx 76: 19 0 0 0 xen-dyn -event vif0-q3-tx 77: 21 0 0 0 xen-dyn -event vif0-q3-rx Below is call trace information without this patch: name 'device/vif/0-q0-tx' WARNING: CPU: 2 PID: 37 at fs/proc/generic.c:174 __xlate_proc_name+0x85/0xa0 RIP: 0010:__xlate_proc_name+0x85/0xa0 RSP: 0018:ffffb85c40473c18 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000006 RCX: 0000000000000006 RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff984c7f516930 RBP: ffffb85c40473cb8 R08: 000000000000002c R09: 0000000000000229 R10: 0000000000000000 R11: 0000000000000001 R12: ffffb85c40473c98 R13: ffffb85c40473cb8 R14: ffffb85c40473c50 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff984c7f500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f69b6899038 CR3: 000000001c20a006 CR4: 00000000001606e0 Call Trace: __proc_create+0x45/0x230 ? snprintf+0x49/0x60 proc_mkdir_data+0x35/0x90 register_handler_proc+0xef/0x110 ? proc_register+0xfc/0x110 ? proc_create_data+0x70/0xb0 __setup_irq+0x39b/0x660 ? request_threaded_irq+0xad/0x160 request_threaded_irq+0xf5/0x160 ? xennet_tx_buf_gc+0x1d0/0x1d0 [xen_netfront] bind_evtchn_to_irqhandler+0x3d/0x70 ? xenbus_alloc_evtchn+0x41/0xa0 netback_changed+0xa46/0xcda [xen_netfront] ? find_watch+0x40/0x40 xenwatch_thread+0xc5/0x160 ? finish_wait+0x80/0x80 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x35/0x40 Code: 81 5c 00 48 85 c0 75 cc 5b 49 89 2e 31 c0 5d 4d 89 3c 24 41 5c 41 5d 41 5e 41 5f c3 4c 89 ee 48 c7 c7 40 4f 0e b4 e8 65 ea d8 ff <0f> 0b b8 fe ff ff ff 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 0f 1f ---[ end trace 650e5561b0caab3a ]--- Signed-off-by: Xiao Liang <xiliang@redhat.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26xen-netfront: fix queue name settingVitaly Kuznetsov
[ Upstream commit 2d408c0d4574b01b9ed45e02516888bf925e11a9 ] Commit f599c64fdf7d ("xen-netfront: Fix race between device setup and open") changed the initialization order: xennet_create_queues() now happens before we do register_netdev() so using netdev->name in xennet_init_queue() is incorrect, we end up with the following in /proc/interrupts: 60: 139 0 xen-dyn -event eth%d-q0-tx 61: 265 0 xen-dyn -event eth%d-q0-rx 62: 234 0 xen-dyn -event eth%d-q1-tx 63: 1 0 xen-dyn -event eth%d-q1-rx and this looks ugly. Actually, using early netdev name (even when it's already set) is also not ideal: nowadays we tend to rename eth devices and queue name may end up not corresponding to the netdev name. Use nodename from xenbus device for queue naming: this can't change in VM's lifetime. Now /proc/interrupts looks like 62: 202 0 xen-dyn -event device/vif/0-q0-tx 63: 317 0 xen-dyn -event device/vif/0-q0-rx 64: 262 0 xen-dyn -event device/vif/0-q1-tx 65: 17 0 xen-dyn -event device/vif/0-q1-rx Fixes: f599c64fdf7d ("xen-netfront: Fix race between device setup and open") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19ethernet: ti: davinci_emac: add missing of_node_put after calling ↵Peter Chen
of_parse_phandle commit 5817f977527e5cdbea9ca56d2b95824f59c8747d upstream. of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19net: ethernet: ti: cpsw: fix mdio device reference leakJohan Hovold
commit 86e1d5adcef961eb383ce4eacbe0ef22f06e2045 upstream. Make sure to drop the reference taken by of_find_device_by_node() when looking up an mdio device from a phy_id property during probe. Fixes: 549985ee9c72 ("cpsw: simplify the setup of the register pointers") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac configDavid Rivshin
commit 552165bcf7060b998b4a9b5b86110b6a5e04dfd9 upstream. Commit 9e42f715264ff158478fa30eaed847f6e131366b ("drivers: net: cpsw: add phy-handle parsing") saved the "phy-handle" phandle into a new cpsw_priv field. However, phy connections are per-slave, so the phy_node field should be in cpsw_slave_data rather than cpsw_priv. This would go unnoticed in a single emac configuration. But in dual_emac mode, the last "phy-handle" property parsed for either slave would be used by both of them, causing them both to refer to the same phy_device. Fixes: 9e42f715264f ("drivers: net: cpsw: add phy-handle parsing") Signed-off-by: David Rivshin <drivshin@allworx.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Andrew Goodbody <andrew.goodbody@cambrionix.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19net: mvneta: fix mtu change on port without linkYelena Krivosheev
[ Upstream commit 8466baf788ec3e18836bd9c91ba0b1a07af25878 ] It is incorrect to enable TX/RX queues (call by mvneta_port_up()) for port without link. Indeed MTU change for interface without link causes TX queues to stuck. Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> [gregory.clement: adding Fixes tags and rewording commit log] Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19ath10k: disable bundle mgmt tx completion event supportSurabhi Vishnoi
[ Upstream commit 673bc519c55843c68c3aecff71a4101e79d28d2b ] The tx completion of multiple mgmt frames can be bundled in a single event and sent by the firmware to host, if this capability is not disabled explicitly by the host. If the host cannot handle the bundled mgmt tx completion, this capability support needs to be disabled in the wmi init cmd, sent to the firmware. Add the host capability indication flag in the wmi ready command, to let firmware know the features supported by the host driver. This field is ignored if it is not supported by firmware. Set the host capability indication flag(i.e. host_capab) to zero, for disabling the support of bundle mgmt tx completion. This will indicate the firmware to send completion event for every mgmt tx completion, instead of bundling them together and sending in a single event. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19ath10k: prevent active scans on potential unusable channelsSven Eckelmann
[ Upstream commit 3f259111583801013cb605bb4414aa529adccf1c ] The QCA4019 hw1.0 firmware 10.4-3.2.1-00050 and 10.4-3.5.3-00053 (and most likely all other) seem to ignore the WMI_CHAN_FLAG_DFS flag during the scan. This results in transmission (probe requests) on channels which are not "available" for transmissions. Since the firmware is closed source and nothing can be done from our side to fix the problem in it, the driver has to work around this problem. The WMI_CHAN_FLAG_PASSIVE seems to be interpreted by the firmware to not scan actively on a channel unless an AP was detected on it. Simple probe requests will then be transmitted by the STA on the channel. ath10k must therefore also use this flag when it queues a radar channel for scanning. This should reduce the chance of an active scan when the channel might be "unusable" for transmissions. Fixes: e8a50f8ba44b ("ath10k: introduce DFS implementation") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-15enic: do not call enic_change_mtu in enic_probeGovindarajulu Varadarajan
commit cb5c6568867325f9905e80c96531d963bec8e5ea upstream. In commit ab123fe071c9 ("enic: handle mtu change for vf properly") ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being called without rtnl held. enic_probe() calls enic_change_mtu() without rtnl held. At this point netdev is not registered yet. Remove call to enic_change_mtu and assign the mtu to netdev->mtu. Fixes: ab123fe071c9 ("enic: handle mtu change for vf properly") Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-15qlge: Fix netdev features configuration.Manish Chopra
[ Upstream commit 6750c87074c5b534d82fdaabb1deb45b8f1f57de ] qlge_fix_features() is not supposed to modify hardware or driver state, rather it is supposed to only fix requested fetures bits. Currently qlge_fix_features() also goes for interface down and up unnecessarily if there is not even any change in features set. This patch changes/fixes following - 1) Move reload of interface or device re-config from qlge_fix_features() to qlge_set_features(). 2) Reload of interface in qlge_set_features() only if relevant feature bit (NETIF_F_HW_VLAN_CTAG_RX) is changed. 3) Get rid of qlge_fix_features() since driver is not really required to fix any features bit. Signed-off-by: Manish <manish.chopra@cavium.com> Reviewed-by: Benjamin Poirier <bpoirier@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-15net: bcmgenet: use MAC link status for fixed phyDoug Berger
[ Upstream commit c3c397c1f16c51601a3fac4fe0c63ad8aa85a904 ] When using the fixed PHY with GENET (e.g. MOCA) the PHY link status can be determined from the internal link status captured by the MAC. This allows the PHY state machine to use the correct link state with the fixed PHY even if MAC link event interrupts are missed when the net device is opened. Fixes: 8d88c6ebb34c ("net: bcmgenet: enable MoCA link state change detection") Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-09net: lan78xx: Fix misplaced tasklet_schedule() callBen Hutchings
Commit 136f55f66019 ("net: lan78xx: fix rx handling before first packet is send") was not correctly backported to 4.4. The call to tasklet_schedule() belongs in lan78xx_link_reset(). Fixes: d1fc12d8475c ("net: lan78xx: fix rx handling before first packet is send") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05drivers: net: lmc: fix case value for target abort errorColin Ian King
[ Upstream commit afb41bb039656f0cecb54eeb8b2e2088201295f5 ] Current value for a target abort error is 0x010, however, this value should in fact be 0x002. As it stands, the range of error is 0..7 so it is currently never being detected. This bug has been in the driver since the early 2.6.12 days (or before). Detected by CoverityScan, CID#744290 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05enic: handle mtu change for vf properlyGovindarajulu Varadarajan
[ Upstream commit ab123fe071c9aa9680ecd62eb080eb26cff4892c ] When driver gets notification for mtu change, driver does not handle it for all RQs. It handles only RQ[0]. Fix is to use enic_change_mtu() interface to change mtu for vf. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05net: axienet: Fix double deregister of mdioShubhrajyoti Datta
[ Upstream commit 03bc7cab7d7218088412a75e141696a89059ab00 ] If the registration fails then mdio_unregister is called. However at unbind the unregister ia attempted again resulting in the below crash [ 73.544038] kernel BUG at drivers/net/phy/mdio_bus.c:415! [ 73.549362] Internal error: Oops - BUG: 0 [#1] SMP [ 73.554127] Modules linked in: [ 73.557168] CPU: 0 PID: 2249 Comm: sh Not tainted 4.14.0 #183 [ 73.562895] Hardware name: xlnx,zynqmp (DT) [ 73.567062] task: ffffffc879e41180 task.stack: ffffff800cbe0000 [ 73.572973] PC is at mdiobus_unregister+0x84/0x88 [ 73.577656] LR is at axienet_mdio_teardown+0x18/0x30 [ 73.582601] pc : [<ffffff80085fa4cc>] lr : [<ffffff8008616858>] pstate: 20000145 [ 73.589981] sp : ffffff800cbe3c30 [ 73.593277] x29: ffffff800cbe3c30 x28: ffffffc879e41180 [ 73.598573] x27: ffffff8008a21000 x26: 0000000000000040 [ 73.603868] x25: 0000000000000124 x24: ffffffc879efe920 [ 73.609164] x23: 0000000000000060 x22: ffffffc879e02000 [ 73.614459] x21: ffffffc879e02800 x20: ffffffc87b0b8870 [ 73.619754] x19: ffffffc879e02800 x18: 000000000000025d [ 73.625050] x17: 0000007f9a719ad0 x16: ffffff8008195bd8 [ 73.630345] x15: 0000007f9a6b3d00 x14: 0000000000000010 [ 73.635640] x13: 74656e7265687465 x12: 0000000000000030 [ 73.640935] x11: 0000000000000030 x10: 0101010101010101 [ 73.646231] x9 : 241f394f42533300 x8 : ffffffc8799f6e98 [ 73.651526] x7 : ffffffc8799f6f18 x6 : ffffffc87b0ba318 [ 73.656822] x5 : ffffffc87b0ba498 x4 : 0000000000000000 [ 73.662117] x3 : 0000000000000000 x2 : 0000000000000008 [ 73.667412] x1 : 0000000000000004 x0 : ffffffc8799f4000 [ 73.672708] Process sh (pid: 2249, stack limit = 0xffffff800cbe0000) Fix the same by making the bus NULL on unregister. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05bnx2x: Fix invalid memory access in rss hash config path.Sudarsana Reddy Kalluru
[ Upstream commit ae2dcb28c24794a87e424a726a1cf1a61980f52d ] Rx hash/filter table configuration uses rss_conf_obj to configure filters in the hardware. This object is initialized only when the interface is brought up. This patch adds driver changes to configure rss params only when the device is in opened state. In port disabled case, the config will be cached in the driver structure which will be applied in the successive load path. Please consider applying it to 'net' branch. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05can: mpc5xxx_can: check of_iomap return before useNicholas Mc Guire
[ Upstream commit b5c1a23b17e563b656cc9bb76ce5323b997d90e8 ] of_iomap() can return NULL so that return needs to be checked and NULL treated as failure. While at it also take care of the missing of_node_put() in the error path. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: commit afa17a500a36 ("net/can: add driver for mscan family & mpc52xx_mscan") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05net: prevent ISA drivers from building on PPC32Randy Dunlap
[ Upstream commit c9ce1fa1c24b08e13c2a3b5b1f94a19c9eaa982c ] Prevent drivers from building on PPC32 if they use isa_bus_to_virt(), isa_virt_to_bus(), or isa_page_to_bus(), which are not available and thus cause build errors. ../drivers/net/ethernet/3com/3c515.c: In function 'corkscrew_open': ../drivers/net/ethernet/3com/3c515.c:824:9: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/amd/lance.c: In function 'lance_rx': ../drivers/net/ethernet/amd/lance.c:1203:23: error: implicit declaration of function 'isa_bus_to_virt'; did you mean 'bus_to_virt'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/amd/ni65.c: In function 'ni65_init_lance': ../drivers/net/ethernet/amd/ni65.c:585:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/cirrus/cs89x0.c: In function 'net_open': ../drivers/net/ethernet/cirrus/cs89x0.c:897:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05atl1c: reserve min skb headroomFlorian Westphal
[ Upstream commit 6e56830776828d8ca9897fc4429eeab47c3bb432 ] Got crash report with following backtrace: BUG: unable to handle kernel paging request at ffff8801869daffe RIP: 0010:[<ffffffff816429c4>] [<ffffffff816429c4>] ip6_finish_output2+0x394/0x4c0 RSP: 0018:ffff880186c83a98 EFLAGS: 00010283 RAX: ffff8801869db00e ... [<ffffffff81644cdc>] ip6_finish_output+0x8c/0xf0 [<ffffffff81644d97>] ip6_output+0x57/0x100 [<ffffffff81643dc9>] ip6_forward+0x4b9/0x840 [<ffffffff81645566>] ip6_rcv_finish+0x66/0xc0 [<ffffffff81645db9>] ipv6_rcv+0x319/0x530 [<ffffffff815892ac>] netif_receive_skb+0x1c/0x70 [<ffffffffc0060bec>] atl1c_clean+0x1ec/0x310 [atl1c] ... The bad access is in neigh_hh_output(), at skb->data - 16 (HH_DATA_MOD). atl1c driver provided skb with no headroom, so 14 bytes (ethernet header) got pulled, but then 16 are copied. Reserve NET_SKB_PAD bytes headroom, like netdev_alloc_skb(). Compile tested only; I lack hardware. Fixes: 7b7017642199 ("atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring") Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05qed: Fix possible race for the link state value.Sudarsana Reddy Kalluru
[ Upstream commit 58874c7b246109d8efb2b0099d1aa296d6bfc3fa ] There's a possible race where driver can read link status in mid-transition and see that virtual-link is up yet speed is 0. Since in this mid-transition we're guaranteed to see a mailbox from MFW soon, we can afford to treat this as link down. Fixes: cc875c2e ("qed: Add link support") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24net: qca_spi: Fix log level if probe failsStefan Wahren
[ Upstream commit 50973993260a6934f0a00da53d9b746cfbea89ab ] In cases the probing fails the log level of the messages should be an error. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24net: qca_spi: Make sure the QCA7000 reset is triggeredStefan Wahren
[ Upstream commit 711c62dfa6bdb4326ca6c587f295ea5c4f7269de ] In case the SPI thread is not running, a simple reset of sync state won't fix the transmit timeout. We also need to wake up the kernel thread. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: ed7d42e24eff ("net: qca_spi: fix transmit queue timeout handling") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24net: qca_spi: Avoid packet drop during initial syncStefan Wahren
[ Upstream commit b2bab426dc715de147f8039a3fccff27d795f4eb ] As long as the synchronization with the QCA7000 isn't finished, we cannot accept packets from the upper layers. So let the SPI thread enable the TX queue after sync and avoid unwanted packet drop. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24net: usb: rtl8150: demote allmulti message to dev_dbg()David Lechner
[ Upstream commit 3a9b0455062ffb9d2f6cd4473a76e3456f318c9f ] This driver can spam the kernel log with multiple messages of: net eth0: eth0: allmulti set Usually 4 or 8 at a time (probably because of using ConnMan). This message doesn't seem useful, so let's demote it from dev_info() to dev_dbg(). Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24qlogic: check kstrtoul() for errorsDan Carpenter
[ Upstream commit 5fc853cc01c68f84984ecc2d5fd777ecad78240f ] We accidentally left out the error handling for kstrtoul(). Fixes: a520030e326a ("qlcnic: Implement flash sysfs callback for 83xx adapter") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24ixgbe: Be more careful when modifying MAC filtersAlexander Duyck
[ Upstream commit d14c780c11fbc10f66c43e7b64eefe87ca442bd3 ] This change makes it so that we are much more explicit about the ordering of updates to the receive address register (RAR) table. Prior to this patch I believe we may have been updating the table while entries were still active, or possibly allowing for reordering of things since we weren't explicitly flushing writes to either the lower or upper portion of the register prior to accessing the other half. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24bnxt_en: Fix for system hang if request_irq failsVikas Gupta
[ Upstream commit c58387ab1614f6d7fb9e244f214b61e7631421fc ] Fix bug in the error code path when bnxt_request_irq() returns failure. bnxt_disable_napi() should not be called in this error path because NAPI has not been enabled yet. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24ieee802154: fakelb: switch from BUG_ON() to WARN_ON() on problemStefan Schmidt
[ Upstream commit 8f2fbc6c60ff213369e06a73610fc882a42fdf20 ] The check is valid but it does not warrant to crash the kernel. A WARN_ON() is good enough here. Found by checkpatch. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24ieee802154: at86rf230: use __func__ macro for debug messagesStefan Schmidt
[ Upstream commit 8a81388ec27c4c0adbdecd20e67bb5f411ab46b2 ] Instead of having the function name hard-coded (it might change and we forgot to update them in the debug output) we can use __func__ instead and also shorter the line so we do not need to break it. Also fix an extra blank line while being here. Found by checkpatch. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24ieee802154: at86rf230: switch from BUG_ON() to WARN_ON() on problemStefan Schmidt
[ Upstream commit 20f330452ad8814f2289a589baf65e21270879a7 ] The check is valid but it does not warrant to crash the kernel. A WARN_ON() is good enough here. Found by checkpatch. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24smsc75xx: Add workaround for gigabit link up hardware errata.Yuiko Oshino
[ Upstream commit d461e3da905332189aad546b2ad9adbe6071c7cc ] In certain conditions, the device may not be able to link in gigabit mode. This software workaround ensures that the device will not enter the failure state. Fixes: d0cad871703b898a442e4049c532ec39168e5b57 ("SMSC75XX USB 2.0 Gigabit Ethernet Devices") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24bnx2x: Fix receiving tx-timeout in error or recovery state.Sudarsana Reddy Kalluru
[ Upstream commit 484c016d9392786ce5c74017c206c706f29f823d ] Driver performs the internal reload when it receives tx-timeout event from the OS. Internal reload might fail in some scenarios e.g., fatal HW issues. In such cases OS still see the link, which would result in undesirable functionalities such as re-generation of tx-timeouts. The patch addresses this issue by indicating the link-down to OS when tx-timeout is detected, and keeping the link in down state till the internal reload is successful. Please consider applying it to 'net' branch. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24brcmfmac: stop watchdog before detach and free everythingMichael Trimarchi
[ Upstream commit 373c83a801f15b1e3d02d855fad89112bd4ccbe0 ] Using built-in in kernel image without a firmware in filesystem or in the kernel image can lead to a kernel NULL pointer deference. Watchdog need to be stopped in brcmf_sdio_remove The system is going down NOW! [ 1348.110759] Unable to handle kernel NULL pointer dereference at virtual address 000002f8 Sent SIGTERM to all processes [ 1348.121412] Mem abort info: [ 1348.126962] ESR = 0x96000004 [ 1348.130023] Exception class = DABT (current EL), IL = 32 bits [ 1348.135948] SET = 0, FnV = 0 [ 1348.138997] EA = 0, S1PTW = 0 [ 1348.142154] Data abort info: [ 1348.145045] ISV = 0, ISS = 0x00000004 [ 1348.148884] CM = 0, WnR = 0 [ 1348.151861] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____) [ 1348.158475] [00000000000002f8] pgd=0000000000000000 [ 1348.163364] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 1348.168927] Modules linked in: ipv6 [ 1348.172421] CPU: 3 PID: 1421 Comm: brcmf_wdog/mmc0 Not tainted 4.17.0-rc5-next-20180517 #18 [ 1348.180757] Hardware name: Amarula A64-Relic (DT) [ 1348.185455] pstate: 60000005 (nZCv daif -PAN -UAO) [ 1348.190251] pc : brcmf_sdiod_freezer_count+0x0/0x20 [ 1348.195124] lr : brcmf_sdio_watchdog_thread+0x64/0x290 [ 1348.200253] sp : ffff00000b85be30 [ 1348.203561] x29: ffff00000b85be30 x28: 0000000000000000 [ 1348.208868] x27: ffff00000b6cb918 x26: ffff80003b990638 [ 1348.214176] x25: ffff0000087b1a20 x24: ffff80003b94f800 [ 1348.219483] x23: ffff000008e620c8 x22: ffff000008f0b660 [ 1348.224790] x21: ffff000008c6a858 x20: 00000000fffffe00 [ 1348.230097] x19: ffff80003b94f800 x18: 0000000000000001 [ 1348.235404] x17: 0000ffffab2e8a74 x16: ffff0000080d7de8 [ 1348.240711] x15: 0000000000000000 x14: 0000000000000400 [ 1348.246018] x13: 0000000000000400 x12: 0000000000000001 [ 1348.251324] x11: 00000000000002c4 x10: 0000000000000a10 [ 1348.256631] x9 : ffff00000b85bc40 x8 : ffff80003be11870 [ 1348.261937] x7 : ffff80003dfc7308 x6 : 000000078ff08b55 [ 1348.267243] x5 : 00000139e1058400 x4 : 0000000000000000 [ 1348.272550] x3 : dead000000000100 x2 : 958f2788d6618100 [ 1348.277856] x1 : 00000000fffffe00 x0 : 0000000000000000 Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24cxgb4: when disabling dcb set txq dcb priority to 0Ganesh Goudar
[ Upstream commit 5ce36338a30f9814fc4824f9fe6c20cd83d872c7 ] When we are disabling DCB, store "0" in txq->dcb_prio since that's used for future TX Work Request "OVLAN_IDX" values. Setting non zero priority upon disabling DCB would halt the traffic. Reported-by: AMG Zollner Robert <robert@cloudmedia.eu> CC: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24net: davinci_emac: match the mdio device against its compatible if possibleBartosz Golaszewski
[ Upstream commit ea0820bb771175c7d4192fc6f5b5c56b3c6d5239 ] Device tree based systems without of_dev_auxdata will have the mdio device named differently than "davinci_mdio(.0)". In this case use the device's parent's compatible string for matching Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24net: hamradio: use eth_broadcast_addrStefan Agner
[ Upstream commit 4e8439aa34802deab11cee68b0ecb18f887fb153 ] The array bpq_eth_addr is only used to get the size of an address, whereas the bcast_addr is used to set the broadcast address. This leads to a warning when using clang: drivers/net/hamradio/bpqether.c:94:13: warning: variable 'bpq_eth_addr' is not needed and will not be emitted [-Wunneeded-internal-declaration] static char bpq_eth_addr[6]; ^ Remove both variables and use the common eth_broadcast_addr to set the broadcast address. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24enic: initialize enic->rfs_h.lock in enic_probeGovindarajulu Varadarajan
[ Upstream commit 3256d29fc7aecdf99feb1cb9475ed2252769a8a7 ] lockdep spotted that we are using rfs_h.lock in enic_get_rxnfc() without initializing. rfs_h.lock is initialized in enic_open(). But ethtool_ops can be called when interface is down. Move enic_rfs_flw_tbl_init to enic_probe. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 18 PID: 1189 Comm: ethtool Not tainted 4.17.0-rc7-devel+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: dump_stack+0x85/0xc0 register_lock_class+0x550/0x560 ? __handle_mm_fault+0xa8b/0x1100 __lock_acquire+0x81/0x670 lock_acquire+0xb9/0x1e0 ? enic_get_rxnfc+0x139/0x2b0 [enic] _raw_spin_lock_bh+0x38/0x80 ? enic_get_rxnfc+0x139/0x2b0 [enic] enic_get_rxnfc+0x139/0x2b0 [enic] ethtool_get_rxnfc+0x8d/0x1c0 dev_ethtool+0x16c8/0x2400 ? __mutex_lock+0x64d/0xa00 ? dev_load+0x6a/0x150 dev_ioctl+0x253/0x4b0 sock_do_ioctl+0x9a/0x130 sock_ioctl+0x1af/0x350 do_vfs_ioctl+0x8e/0x670 ? syscall_trace_enter+0x1e2/0x380 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5a/0x170 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24qed: Add sanity check for SIMD fastpath handler.Sudarsana Reddy Kalluru
[ Upstream commit 3935a70968820c3994db4de7e6e1c7e814bff875 ] Avoid calling a SIMD fastpath handler if it is NULL. The check is needed to handle an unlikely scenario where unsolicited interrupt is destined to a PF in INTa mode. Fixes: fe56b9e6a ("qed: Add module with basic common support") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-15xen/netfront: don't cache skb_shinfo()Juergen Gross
commit d472b3a6cf63cd31cae1ed61930f07e6cd6671b5 upstream. skb_shinfo() can change when calling __pskb_pull_tail(): Don't cache its return value. Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06can: ems_usb: Fix memory leak on ems_usb_disconnect()Anton Vasilyev
commit 72c05f32f4a5055c9c8fe889bb6903ec959c0aad upstream. ems_usb_probe() allocates memory for dev->tx_msg_buffer, but there is no its deallocation in ems_usb_disconnect(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06NET: stmmac: align DMA stuff to largest cache line lengthEugeniy Paltsev
[ Upstream commit 9939a46d90c6c76f4533d534dbadfa7b39dc6acc ] As for today STMMAC_ALIGN macro (which is used to align DMA stuff) relies on L1 line length (L1_CACHE_BYTES). This isn't correct in case of system with several cache levels which might have L1 cache line length smaller than L2 line. This can lead to sharing one cache line between DMA buffer and other data, so we can lose this data while invalidate DMA buffer before DMA transaction. Fix that by using SMP_CACHE_BYTES instead of L1_CACHE_BYTES for aligning. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06xen-netfront: wait xenbus state change when load module manuallyXiao Liang
[ Upstream commit 822fb18a82abaf4ee7058793d95d340f5dab7bfc ] When loading module manually, after call xenbus_switch_state to initializes the state of the netfront device, the driver state did not change so fast that may lead no dev created in latest kernel. This patch adds wait to make sure xenbus knows the driver is not in closed/unknown state. Current state: [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Cannot get device settings: No such device Cannot get wake-on-lan settings: No such device Cannot get message level: No such device Cannot get link status: No such device No data available With the patch installed. [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Link detected: yes Signed-off-by: Xiao Liang <xiliang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06net: lan78xx: fix rx handling before first packet is sendStefan Wahren
[ Upstream commit 136f55f660192ce04af091642efc75d85e017364 ] As long the bh tasklet isn't scheduled once, no packet from the rx path will be handled. Since the tx path also schedule the same tasklet this situation only persits until the first packet transmission. So fix this issue by scheduling the tasklet after link reset. Link: https://github.com/raspberrypi/linux/issues/2617 Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Suggested-by: Floris Bos <bos@je-eigen-domein.nl> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06net: fix amd-xgbe flow-control issuetangpengpeng
[ Upstream commit 7f3fc7ddf719cd6faaf787722c511f6918ac6aab ] If we enable or disable xgbe flow-control by ethtool , it does't work.Because the parameter is not properly assigned,so we need to adjust the assignment order of the parameters. Fixes: c1ce2f77366b ("amd-xgbe: Fix flow control setting logic") Signed-off-by: tangpengpeng <tangpengpeng@higon.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06rsi: Fix 'invalid vdd' warning in mmcSiva Rebbagondla
[ Upstream commit 78e450719c702784e42af6da912d3692fd3da0cb ] While performing cleanup, driver is messing with card->ocr value by not masking rocr against ocr_avail. Below panic is observed with some of the SDIO host controllers due to this. Issue is resolved by reverting incorrect modifications to vdd. [ 927.423821] mmc1: Invalid vdd 0x1f [ 927.423925] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic [ 927.424073] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000-caracalla #1 [ 927.424075] Hardware name: Dell Inc. Edge Gateway 3003/ , BIOS 01.00.06 01/22/2018 [ 927.424082] RIP: 0010:sdhci_set_power_noreg+0xdd/0x190[sdhci] [ 927.424085] RSP: 0018:ffffac3fc064b930 EFLAGS: 00010282 [ 927.424107] Call Trace: [ 927.424118] sdhci_set_power+0x5a/0x60 [sdhci] [ 927.424125] sdhci_set_ios+0x360/0x3b0 [sdhci] [ 927.424133] mmc_set_initial_state+0x92/0x120 [ 927.424137] mmc_power_up.part.34+0x33/0x1d0 [ 927.424141] mmc_power_up+0x17/0x20 [ 927.424147] mmc_sdio_runtime_resume+0x2d/0x50 [ 927.424151] mmc_runtime_resume+0x17/0x20 [ 927.424156] __rpm_callback+0xc4/0x200 [ 927.424161] ? idr_alloc_cyclic+0x57/0xd0 [ 927.424165] ? mmc_runtime_suspend+0x20/0x20 [ 927.424169] rpm_callback+0x24/0x80 [ 927.424172] ? mmc_runtime_suspend+0x20/0x20 [ 927.424176] rpm_resume+0x4b3/0x6c0 [ 927.424181] __pm_runtime_resume+0x4e/0x80 [ 927.424188] driver_probe_device+0x41/0x490 [ 927.424192] __driver_attach+0xdf/0xf0 [ 927.424196] ? driver_probe_device+0x490/0x490 [ 927.424201] bus_for_each_dev+0x6c/0xc0 [ 927.424205] driver_attach+0x1e/0x20 [ 927.424209] bus_add_driver+0x1f4/0x270 [ 927.424217] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.424221] driver_register+0x60/0xe0 [ 927.424227] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.424231] sdio_register_driver+0x20/0x30 [ 927.424237] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-14 03:22:17 +0000