ASoC: Intel: Skylake: Add module configuration helpers

To configure a module, driver needs to send input and output PCM
params for a module in DSP. The FE PCM params come from hw_params
ie from user, for a BE they also come from hw_params but from
BE-link fixups.
So based on PCM params required driver has to find a converter
module (src/updown/format) and then do the conversion and
calculate PCM params in these pipelines In this patch we add the
helper modules which allow driver to do these calculations.

Signed-off-by: Hardik T Shah <hardik.t.shah@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 140 insertions, 0 deletions

diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c
index b0ee1fe05274..56baf9d88f28 100644
--- a/sound/soc/intel/skylake/skl-topology.c
+++ b/sound/soc/intel/skylake/skl-topology.c
@@ -27,6 +27,10 @@
 #include "skl.h"
 #include "skl-tplg-interface.h"
 
+#define SKL_CH_FIXUP_MASK		(1 << 0)
+#define SKL_RATE_FIXUP_MASK		(1 << 1)
+#define SKL_FMT_FIXUP_MASK		(1 << 2)
+
 /*
  * SKL DSP driver modelling uses only few DAPM widgets so for rest we will
  * ignore. This helpers checks if the SKL driver handles this widget type
@@ -119,6 +123,137 @@ skl_tplg_free_pipe_mem(struct skl *skl, struct skl_module_cfg *mconfig)
 	skl->resource.mem -= mconfig->pipe->memory_pages;
 }
 
+
+static void skl_dump_mconfig(struct skl_sst *ctx,
+					struct skl_module_cfg *mcfg)
+{
+	dev_dbg(ctx->dev, "Dumping config\n");
+	dev_dbg(ctx->dev, "Input Format:\n");
+	dev_dbg(ctx->dev, "channels = %d\n", mcfg->in_fmt.channels);
+	dev_dbg(ctx->dev, "s_freq = %d\n", mcfg->in_fmt.s_freq);
+	dev_dbg(ctx->dev, "ch_cfg = %d\n", mcfg->in_fmt.ch_cfg);
+	dev_dbg(ctx->dev, "valid bit depth = %d\n",
+			mcfg->in_fmt.valid_bit_depth);
+	dev_dbg(ctx->dev, "Output Format:\n");
+	dev_dbg(ctx->dev, "channels = %d\n", mcfg->out_fmt.channels);
+	dev_dbg(ctx->dev, "s_freq = %d\n", mcfg->out_fmt.s_freq);
+	dev_dbg(ctx->dev, "valid bit depth = %d\n",
+			mcfg->out_fmt.valid_bit_depth);
+	dev_dbg(ctx->dev, "ch_cfg = %d\n", mcfg->out_fmt.ch_cfg);
+}
+
+static void skl_tplg_update_params(struct skl_module_fmt *fmt,
+			struct skl_pipe_params *params, int fixup)
+{
+	if (fixup & SKL_RATE_FIXUP_MASK)
+		fmt->s_freq = params->s_freq;
+	if (fixup & SKL_CH_FIXUP_MASK)
+		fmt->channels = params->ch;
+	if (fixup & SKL_FMT_FIXUP_MASK)
+		fmt->valid_bit_depth = params->s_fmt;
+}
+
+/*
+ * A pipeline may have modules which impact the pcm parameters, like SRC,
+ * channel converter, format converter.
+ * We need to calculate the output params by applying the 'fixup'
+ * Topology will tell driver which type of fixup is to be applied by
+ * supplying the fixup mask, so based on that we calculate the output
+ *
+ * Now In FE the pcm hw_params is source/target format. Same is applicable
+ * for BE with its hw_params invoked.
+ * here based on FE, BE pipeline and direction we calculate the input and
+ * outfix and then apply that for a module
+ */
+static void skl_tplg_update_params_fixup(struct skl_module_cfg *m_cfg,
+		struct skl_pipe_params *params, bool is_fe)
+{
+	int in_fixup, out_fixup;
+	struct skl_module_fmt *in_fmt, *out_fmt;
+
+	in_fmt = &m_cfg->in_fmt;
+	out_fmt = &m_cfg->out_fmt;
+
+	if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		if (is_fe) {
+			in_fixup = m_cfg->params_fixup;
+			out_fixup = (~m_cfg->converter) &
+					m_cfg->params_fixup;
+		} else {
+			out_fixup = m_cfg->params_fixup;
+			in_fixup = (~m_cfg->converter) &
+					m_cfg->params_fixup;
+		}
+	} else {
+		if (is_fe) {
+			out_fixup = m_cfg->params_fixup;
+			in_fixup = (~m_cfg->converter) &
+					m_cfg->params_fixup;
+		} else {
+			in_fixup = m_cfg->params_fixup;
+			out_fixup = (~m_cfg->converter) &
+					m_cfg->params_fixup;
+		}
+	}
+
+	skl_tplg_update_params(in_fmt, params, in_fixup);
+	skl_tplg_update_params(out_fmt, params, out_fixup);
+}
+
+/*
+ * A module needs input and output buffers, which are dependent upon pcm
+ * params, so once we have calculate params, we need buffer calculation as
+ * well.
+ */
+static void skl_tplg_update_buffer_size(struct skl_sst *ctx,
+				struct skl_module_cfg *mcfg)
+{
+	int multiplier = 1;
+
+	if (mcfg->m_type == SKL_MODULE_TYPE_SRCINT)
+		multiplier = 5;
+
+	mcfg->ibs = (mcfg->in_fmt.s_freq / 1000) *
+				(mcfg->in_fmt.channels) *
+				(mcfg->in_fmt.bit_depth >> 3) *
+				multiplier;
+
+	mcfg->obs = (mcfg->out_fmt.s_freq / 1000) *
+				(mcfg->out_fmt.channels) *
+				(mcfg->out_fmt.bit_depth >> 3) *
+				multiplier;
+}
+
+static void skl_tplg_update_module_params(struct snd_soc_dapm_widget *w,
+							struct skl_sst *ctx)
+{
+	struct skl_module_cfg *m_cfg = w->priv;
+	struct skl_pipe_params *params = m_cfg->pipe->p_params;
+	int p_conn_type = m_cfg->pipe->conn_type;
+	bool is_fe;
+
+	if (!m_cfg->params_fixup)
+		return;
+
+	dev_dbg(ctx->dev, "Mconfig for widget=%s BEFORE updation\n",
+				w->name);
+
+	skl_dump_mconfig(ctx, m_cfg);
+
+	if (p_conn_type == SKL_PIPE_CONN_TYPE_FE)
+		is_fe = true;
+	else
+		is_fe = false;
+
+	skl_tplg_update_params_fixup(m_cfg, params, is_fe);
+	skl_tplg_update_buffer_size(ctx, m_cfg);
+
+	dev_dbg(ctx->dev, "Mconfig for widget=%s AFTER updation\n",
+				w->name);
+
+	skl_dump_mconfig(ctx, m_cfg);
+}
+
 /*
  * A pipe can have multiple modules, each of them will be a DAPM widget as
  * well. While managing a pipeline we need to get the list of all the
@@ -178,6 +313,11 @@ skl_tplg_init_pipe_modules(struct skl *skl, struct skl_pipe *pipe)
 		if (!skl_tplg_alloc_pipe_mcps(skl, mconfig))
 			return -ENOMEM;
 
+		/*
+		 * apply fix/conversion to module params based on
+		 * FE/BE params
+		 */
+		skl_tplg_update_module_params(w, ctx);
 		ret = skl_init_module(ctx, mconfig, NULL);
 		if (ret < 0)
 			return ret;