From 17230acdc71137622ca7dfd789b3944c75d39404 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 19 Feb 2007 15:52:45 -0500 Subject: UHCI: Eliminate asynchronous skeleton Queue Headers This patch (as856) attempts to improve the performance of uhci-hcd by removing the asynchronous skeleton Queue Headers. They don't contain any useful information but the controller has to read through them at least once every millisecond, incurring a non-zero DMA overhead. Now all the asynchronous queues are combined, along with the period-1 interrupt queue, into a single list with a single skeleton QH. The start of the low-speed control, full-speed control, and bulk sublists is determined by linear search. Since there should rarely be more than a couple of QHs in the list, the searches should incur a much smaller total load than keeping the skeleton QHs. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-debug.c | 50 ++++++----- drivers/usb/host/uhci-hcd.c | 52 +++++------- drivers/usb/host/uhci-hcd.h | 74 ++++++++-------- drivers/usb/host/uhci-q.c | 193 +++++++++++++++++++++++++++++++++++++----- 4 files changed, 256 insertions(+), 113 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index a0677133577b..8d24d3dc0a61 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -220,16 +220,6 @@ static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space) return out - buf; } -static const char * const qh_names[] = { - "skel_unlink_qh", "skel_iso_qh", - "skel_int128_qh", "skel_int64_qh", - "skel_int32_qh", "skel_int16_qh", - "skel_int8_qh", "skel_int4_qh", - "skel_int2_qh", "skel_int1_qh", - "skel_ls_control_qh", "skel_fs_control_qh", - "skel_bulk_qh", "skel_term_qh" -}; - static int uhci_show_sc(int port, unsigned short status, char *buf, int len) { char *out = buf; @@ -352,6 +342,12 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) struct uhci_td *td; struct list_head *tmp, *head; int nframes, nerrs; + __le32 link; + + static const char * const qh_names[] = { + "unlink", "iso", "int128", "int64", "int32", "int16", + "int8", "int4", "int2", "async", "term" + }; out += uhci_show_root_hub_state(uhci, out, len - (out - buf)); out += sprintf(out, "HC status\n"); @@ -374,7 +370,7 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) nframes = 10; nerrs = 0; for (i = 0; i < UHCI_NUMFRAMES; ++i) { - __le32 link, qh_dma; + __le32 qh_dma; j = 0; td = uhci->frame_cpu[i]; @@ -430,23 +426,21 @@ check_link: for (i = 0; i < UHCI_NUM_SKELQH; ++i) { int cnt = 0; + __le32 fsbr_link = 0; qh = uhci->skelqh[i]; - out += sprintf(out, "- %s\n", qh_names[i]); \ + out += sprintf(out, "- skel_%s_qh\n", qh_names[i]); \ out += uhci_show_qh(qh, out, len - (out - buf), 4); /* Last QH is the Terminating QH, it's different */ - if (i == UHCI_NUM_SKELQH - 1) { - if (qh->link != UHCI_PTR_TERM) - out += sprintf(out, " bandwidth reclamation on!\n"); - + if (i == SKEL_TERM) { if (qh_element(qh) != LINK_TO_TD(uhci->term_td)) out += sprintf(out, " skel_term_qh element is not set to term_td!\n"); - + if (link == LINK_TO_QH(uhci->skel_term_qh)) + goto check_qh_link; continue; } - j = (i < 9) ? 9 : i+1; /* Next skeleton */ head = &qh->node; tmp = head->next; @@ -456,14 +450,26 @@ check_link: if (++cnt <= 10) out += uhci_show_qh(qh, out, len - (out - buf), 4); + if (!fsbr_link && qh->skel >= SKEL_FSBR) + fsbr_link = LINK_TO_QH(qh); } if ((cnt -= 10) > 0) out += sprintf(out, " Skipped %d QHs\n", cnt); - if (i > 1 && i < UHCI_NUM_SKELQH - 1) { - if (qh->link != LINK_TO_QH(uhci->skelqh[j])) - out += sprintf(out, " last QH not linked to next skeleton!\n"); - } + link = UHCI_PTR_TERM; + if (i <= SKEL_ISO) + ; + else if (i < SKEL_ASYNC) + link = LINK_TO_QH(uhci->skel_async_qh); + else if (!uhci->fsbr_is_on) + ; + else if (fsbr_link) + link = fsbr_link; + else + link = LINK_TO_QH(uhci->skel_term_qh); +check_qh_link: + if (qh->link != link) + out += sprintf(out, " last QH not linked to next skeleton!\n"); } return out - buf; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 1f0833ab294a..44da4334f1d6 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -13,7 +13,7 @@ * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface * support from usb-ohci.c by Adam Richter, adam@yggdrasil.com). * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c) - * (C) Copyright 2004-2006 Alan Stern, stern@rowland.harvard.edu + * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu * * Intel documents this fairly well, and as far as I know there * are no royalties or anything like that, but even so there are @@ -107,10 +107,10 @@ static __le32 uhci_frame_skel_link(struct uhci_hcd *uhci, int frame) * interrupt QHs, which will help spread out bandwidth utilization. * * ffs (Find First bit Set) does exactly what we need: - * 1,3,5,... => ffs = 0 => use skel_int2_qh = skelqh[8], - * 2,6,10,... => ffs = 1 => use skel_int4_qh = skelqh[7], etc. + * 1,3,5,... => ffs = 0 => use period-2 QH = skelqh[8], + * 2,6,10,... => ffs = 1 => use period-4 QH = skelqh[7], etc. * ffs >= 7 => not on any high-period queue, so use - * skel_int1_qh = skelqh[9]. + * period-1 QH = skelqh[9]. * Add in UHCI_NUMFRAMES to insure at least one bit is set. */ skelnum = 8 - (int) __ffs(frame | UHCI_NUMFRAMES); @@ -540,16 +540,18 @@ static void uhci_shutdown(struct pci_dev *pdev) * * The hardware doesn't really know any difference * in the queues, but the order does matter for the - * protocols higher up. The order is: + * protocols higher up. The order in which the queues + * are encountered by the hardware is: * - * - any isochronous events handled before any + * - All isochronous events are handled before any * of the queues. We don't do that here, because * we'll create the actual TD entries on demand. - * - The first queue is the interrupt queue. - * - The second queue is the control queue, split into low- and full-speed - * - The third queue is bulk queue. - * - The fourth queue is the bandwidth reclamation queue, which loops back - * to the full-speed control queue. + * - The first queue is the high-period interrupt queue. + * - The second queue is the period-1 interrupt and async + * (low-speed control, full-speed control, then bulk) queue. + * - The third queue is the terminating bandwidth reclamation queue, + * which contains no members, loops back to itself, and is present + * only when FSBR is on and there are no full-speed control or bulk QHs. */ static int uhci_start(struct usb_hcd *hcd) { @@ -626,30 +628,18 @@ static int uhci_start(struct usb_hcd *hcd) } /* - * 8 Interrupt queues; link all higher int queues to int1, - * then link int1 to control and control to bulk + * 8 Interrupt queues; link all higher int queues to int1 = async */ - uhci->skel_int128_qh->link = - uhci->skel_int64_qh->link = - uhci->skel_int32_qh->link = - uhci->skel_int16_qh->link = - uhci->skel_int8_qh->link = - uhci->skel_int4_qh->link = - uhci->skel_int2_qh->link = LINK_TO_QH( - uhci->skel_int1_qh); - - uhci->skel_int1_qh->link = LINK_TO_QH(uhci->skel_ls_control_qh); - uhci->skel_ls_control_qh->link = LINK_TO_QH(uhci->skel_fs_control_qh); - uhci->skel_fs_control_qh->link = LINK_TO_QH(uhci->skel_bulk_qh); - uhci->skel_bulk_qh->link = LINK_TO_QH(uhci->skel_term_qh); + for (i = SKEL_ISO + 1; i < SKEL_ASYNC; ++i) + uhci->skelqh[i]->link = LINK_TO_QH(uhci->skel_async_qh); + uhci->skel_async_qh->link = uhci->skel_term_qh->link = UHCI_PTR_TERM; /* This dummy TD is to work around a bug in Intel PIIX controllers */ uhci_fill_td(uhci->term_td, 0, uhci_explen(0) | - (0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0); - uhci->term_td->link = LINK_TO_TD(uhci->term_td); - - uhci->skel_term_qh->link = UHCI_PTR_TERM; - uhci->skel_term_qh->element = LINK_TO_TD(uhci->term_td); + (0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0); + uhci->term_td->link = UHCI_PTR_TERM; + uhci->skel_async_qh->element = uhci->skel_term_qh->element = + LINK_TO_TD(uhci->term_td); /* * Fill the frame list: make all entries point to the proper diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index a8c256b44d8e..1b3d23406ac4 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -135,7 +135,6 @@ struct uhci_qh { struct usb_host_endpoint *hep; /* Endpoint information */ struct usb_device *udev; struct list_head queue; /* Queue of urbps for this QH */ - struct uhci_qh *skel; /* Skeleton for this QH */ struct uhci_td *dummy_td; /* Dummy TD to end the queue */ struct uhci_td *post_td; /* Last TD completed */ @@ -151,6 +150,7 @@ struct uhci_qh { int state; /* QH_STATE_xxx; see above */ int type; /* Queue type (control, bulk, etc) */ + int skel; /* Skeleton queue number */ unsigned int initial_toggle:1; /* Endpoint's current toggle value */ unsigned int needs_fixup:1; /* Must fix the TD toggle values */ @@ -276,12 +276,13 @@ static inline u32 td_status(struct uhci_td *td) { /* * The UHCI driver uses QHs with Interrupt, Control and Bulk URBs for * automatic queuing. To make it easy to insert entries into the schedule, - * we have a skeleton of QHs for each predefined Interrupt latency, - * low-speed control, full-speed control, bulk, and terminating QH - * (see explanation for the terminating QH below). + * we have a skeleton of QHs for each predefined Interrupt latency. + * Asynchronous QHs (low-speed control, full-speed control, and bulk) + * go onto the period-1 interrupt list, since they all get accessed on + * every frame. * - * When we want to add a new QH, we add it to the end of the list for the - * skeleton QH. For instance, the schedule list can look like this: + * When we want to add a new QH, we add it to the list starting from the + * appropriate skeleton QH. For instance, the schedule can look like this: * * skel int128 QH * dev 1 interrupt QH @@ -289,50 +290,47 @@ static inline u32 td_status(struct uhci_td *td) { * skel int64 QH * skel int32 QH * ... - * skel int1 QH - * skel low-speed control QH - * dev 5 control QH - * skel full-speed control QH - * skel bulk QH + * skel int1 + async QH + * dev 5 low-speed control QH * dev 1 bulk QH * dev 2 bulk QH - * skel terminating QH * - * The terminating QH is used for 2 reasons: - * - To place a terminating TD which is used to workaround a PIIX bug - * (see Intel errata for explanation), and - * - To loop back to the full-speed control queue for full-speed bandwidth - * reclamation. + * There is a special terminating QH used to keep full-speed bandwidth + * reclamation active when no full-speed control or bulk QHs are linked + * into the schedule. It has an inactive TD (to work around a PIIX bug, + * see the Intel errata) and it points back to itself. * - * There's a special skeleton QH for Isochronous QHs. It never appears - * on the schedule, and Isochronous TDs go on the schedule before the + * There's a special skeleton QH for Isochronous QHs which never appears + * on the schedule. Isochronous TDs go on the schedule before the * the skeleton QHs. The hardware accesses them directly rather than * through their QH, which is used only for bookkeeping purposes. * While the UHCI spec doesn't forbid the use of QHs for Isochronous, * it doesn't use them either. And the spec says that queues never * advance on an error completion status, which makes them totally * unsuitable for Isochronous transfers. + * + * There's also a special skeleton QH used for QHs which are in the process + * of unlinking and so may still be in use by the hardware. It too never + * appears on the schedule. */ -#define UHCI_NUM_SKELQH 14 -#define skel_unlink_qh skelqh[0] -#define skel_iso_qh skelqh[1] -#define skel_int128_qh skelqh[2] -#define skel_int64_qh skelqh[3] -#define skel_int32_qh skelqh[4] -#define skel_int16_qh skelqh[5] -#define skel_int8_qh skelqh[6] -#define skel_int4_qh skelqh[7] -#define skel_int2_qh skelqh[8] -#define skel_int1_qh skelqh[9] -#define skel_ls_control_qh skelqh[10] -#define skel_fs_control_qh skelqh[11] -#define skel_bulk_qh skelqh[12] -#define skel_term_qh skelqh[13] - -/* Find the skelqh entry corresponding to an interval exponent */ -#define UHCI_SKEL_INDEX(exponent) (9 - exponent) - +#define UHCI_NUM_SKELQH 11 +#define SKEL_UNLINK 0 +#define skel_unlink_qh skelqh[SKEL_UNLINK] +#define SKEL_ISO 1 +#define skel_iso_qh skelqh[SKEL_ISO] + /* int128, int64, ..., int1 = 2, 3, ..., 9 */ +#define SKEL_INDEX(exponent) (9 - exponent) +#define SKEL_ASYNC 9 +#define skel_async_qh skelqh[SKEL_ASYNC] +#define SKEL_TERM 10 +#define skel_term_qh skelqh[SKEL_TERM] + +/* The following entries refer to sublists of skel_async_qh */ +#define SKEL_LS_CONTROL 20 +#define SKEL_FS_CONTROL 21 +#define SKEL_FSBR SKEL_FS_CONTROL +#define SKEL_BULK 22 /* * The UHCI controller and root hub diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index a0c6bf6128a3..f4ebdb3e488f 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -13,7 +13,7 @@ * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface * support from usb-ohci.c by Adam Richter, adam@yggdrasil.com). * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c) - * (C) Copyright 2004-2006 Alan Stern, stern@rowland.harvard.edu + * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu */ @@ -45,14 +45,43 @@ static inline void uhci_clear_next_interrupt(struct uhci_hcd *uhci) */ static void uhci_fsbr_on(struct uhci_hcd *uhci) { + struct uhci_qh *fsbr_qh, *lqh, *tqh; + uhci->fsbr_is_on = 1; - uhci->skel_term_qh->link = LINK_TO_QH(uhci->skel_fs_control_qh); + lqh = list_entry(uhci->skel_async_qh->node.prev, + struct uhci_qh, node); + + /* Find the first FSBR QH. Linear search through the list is + * acceptable because normally FSBR gets turned on as soon as + * one QH needs it. */ + fsbr_qh = NULL; + list_for_each_entry_reverse(tqh, &uhci->skel_async_qh->node, node) { + if (tqh->skel < SKEL_FSBR) + break; + fsbr_qh = tqh; + } + + /* No FSBR QH means we must insert the terminating skeleton QH */ + if (!fsbr_qh) { + uhci->skel_term_qh->link = LINK_TO_QH(uhci->skel_term_qh); + wmb(); + lqh->link = uhci->skel_term_qh->link; + + /* Otherwise loop the last QH to the first FSBR QH */ + } else + lqh->link = LINK_TO_QH(fsbr_qh); } static void uhci_fsbr_off(struct uhci_hcd *uhci) { + struct uhci_qh *lqh; + uhci->fsbr_is_on = 0; - uhci->skel_term_qh->link = UHCI_PTR_TERM; + lqh = list_entry(uhci->skel_async_qh->node.prev, + struct uhci_qh, node); + + /* End the async list normally and unlink the terminating QH */ + lqh->link = uhci->skel_term_qh->link = UHCI_PTR_TERM; } static void uhci_add_fsbr(struct uhci_hcd *uhci, struct urb *urb) @@ -404,12 +433,81 @@ static void uhci_fixup_toggles(struct uhci_qh *qh, int skip_first) } /* - * Put a QH on the schedule in both hardware and software + * Link an Isochronous QH into its skeleton's list */ -static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) +static inline void link_iso(struct uhci_hcd *uhci, struct uhci_qh *qh) +{ + list_add_tail(&qh->node, &uhci->skel_iso_qh->node); + + /* Isochronous QHs aren't linked by the hardware */ +} + +/* + * Link a high-period interrupt QH into the schedule at the end of its + * skeleton's list + */ +static void link_interrupt(struct uhci_hcd *uhci, struct uhci_qh *qh) { struct uhci_qh *pqh; + list_add_tail(&qh->node, &uhci->skelqh[qh->skel]->node); + + pqh = list_entry(qh->node.prev, struct uhci_qh, node); + qh->link = pqh->link; + wmb(); + pqh->link = LINK_TO_QH(qh); +} + +/* + * Link a period-1 interrupt or async QH into the schedule at the + * correct spot in the async skeleton's list, and update the FSBR link + */ +static void link_async(struct uhci_hcd *uhci, struct uhci_qh *qh) +{ + struct uhci_qh *pqh, *lqh; + __le32 link_to_new_qh; + __le32 *extra_link = &link_to_new_qh; + + /* Find the predecessor QH for our new one and insert it in the list. + * The list of QHs is expected to be short, so linear search won't + * take too long. */ + list_for_each_entry_reverse(pqh, &uhci->skel_async_qh->node, node) { + if (pqh->skel <= qh->skel) + break; + } + list_add(&qh->node, &pqh->node); + qh->link = pqh->link; + + link_to_new_qh = LINK_TO_QH(qh); + + /* If this is now the first FSBR QH, take special action */ + if (uhci->fsbr_is_on && pqh->skel < SKEL_FSBR && + qh->skel >= SKEL_FSBR) { + lqh = list_entry(uhci->skel_async_qh->node.prev, + struct uhci_qh, node); + + /* If the new QH is also the last one, we must unlink + * the terminating skeleton QH and make the new QH point + * back to itself. */ + if (qh == lqh) { + qh->link = link_to_new_qh; + extra_link = &uhci->skel_term_qh->link; + + /* Otherwise the last QH must point to the new QH */ + } else + extra_link = &lqh->link; + } + + /* Link it into the schedule */ + wmb(); + *extra_link = pqh->link = link_to_new_qh; +} + +/* + * Put a QH on the schedule in both hardware and software + */ +static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) +{ WARN_ON(list_empty(&qh->queue)); /* Set the element pointer if it isn't set already. @@ -431,18 +529,64 @@ static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) return; qh->state = QH_STATE_ACTIVE; - /* Move the QH from its old list to the end of the appropriate + /* Move the QH from its old list to the correct spot in the appropriate * skeleton's list */ if (qh == uhci->next_qh) uhci->next_qh = list_entry(qh->node.next, struct uhci_qh, node); - list_move_tail(&qh->node, &qh->skel->node); + list_del(&qh->node); + + if (qh->skel == SKEL_ISO) + link_iso(uhci, qh); + else if (qh->skel < SKEL_ASYNC) + link_interrupt(uhci, qh); + else + link_async(uhci, qh); +} + +/* + * Unlink a high-period interrupt QH from the schedule + */ +static void unlink_interrupt(struct uhci_hcd *uhci, struct uhci_qh *qh) +{ + struct uhci_qh *pqh; - /* Link it into the schedule */ pqh = list_entry(qh->node.prev, struct uhci_qh, node); - qh->link = pqh->link; - wmb(); - pqh->link = LINK_TO_QH(qh); + pqh->link = qh->link; + mb(); +} + +/* + * Unlink a period-1 interrupt or async QH from the schedule + */ +static void unlink_async(struct uhci_hcd *uhci, struct uhci_qh *qh) +{ + struct uhci_qh *pqh, *lqh; + __le32 link_to_next_qh = qh->link; + + pqh = list_entry(qh->node.prev, struct uhci_qh, node); + + /* If this is the first FSBQ QH, take special action */ + if (uhci->fsbr_is_on && pqh->skel < SKEL_FSBR && + qh->skel >= SKEL_FSBR) { + lqh = list_entry(uhci->skel_async_qh->node.prev, + struct uhci_qh, node); + + /* If this QH is also the last one, we must link in + * the terminating skeleton QH. */ + if (qh == lqh) { + link_to_next_qh = LINK_TO_QH(uhci->skel_term_qh); + uhci->skel_term_qh->link = link_to_next_qh; + wmb(); + qh->link = link_to_next_qh; + + /* Otherwise the last QH must point to the new first FSBR QH */ + } else + lqh->link = link_to_next_qh; + } + + pqh->link = link_to_next_qh; + mb(); } /* @@ -450,17 +594,18 @@ static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) */ static void uhci_unlink_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) { - struct uhci_qh *pqh; - if (qh->state == QH_STATE_UNLINKING) return; WARN_ON(qh->state != QH_STATE_ACTIVE || !qh->udev); qh->state = QH_STATE_UNLINKING; /* Unlink the QH from the schedule and record when we did it */ - pqh = list_entry(qh->node.prev, struct uhci_qh, node); - pqh->link = qh->link; - mb(); + if (qh->skel == SKEL_ISO) + ; + else if (qh->skel < SKEL_ASYNC) + unlink_interrupt(uhci, qh); + else + unlink_async(uhci, qh); uhci_get_current_frame_number(uhci); qh->unlink_frame = uhci->frame_number; @@ -696,6 +841,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, dma_addr_t data = urb->transfer_dma; __le32 *plink; struct urb_priv *urbp = urb->hcpriv; + int skel; /* The "pipe" thing contains the destination in bits 8--18 */ destination = (urb->pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP; @@ -796,11 +942,13 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, * isn't in the CONFIGURED state. */ if (urb->dev->speed == USB_SPEED_LOW || urb->dev->state != USB_STATE_CONFIGURED) - qh->skel = uhci->skel_ls_control_qh; + skel = SKEL_LS_CONTROL; else { - qh->skel = uhci->skel_fs_control_qh; + skel = SKEL_FS_CONTROL; uhci_add_fsbr(uhci, urb); } + if (qh->state != QH_STATE_ACTIVE) + qh->skel = skel; urb->actual_length = -8; /* Account for the SETUP packet */ return 0; @@ -930,7 +1078,7 @@ nomem: return -ENOMEM; } -static inline int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb, +static int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb, struct uhci_qh *qh) { int ret; @@ -939,7 +1087,8 @@ static inline int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb, if (urb->dev->speed == USB_SPEED_LOW) return -EINVAL; - qh->skel = uhci->skel_bulk_qh; + if (qh->state != QH_STATE_ACTIVE) + qh->skel = SKEL_BULK; ret = uhci_submit_common(uhci, urb, qh); if (ret == 0) uhci_add_fsbr(uhci, urb); @@ -967,7 +1116,7 @@ static int uhci_submit_interrupt(struct uhci_hcd *uhci, struct urb *urb, if (exponent < 0) return -EINVAL; qh->period = 1 << exponent; - qh->skel = uhci->skelqh[UHCI_SKEL_INDEX(exponent)]; + qh->skel = SKEL_INDEX(exponent); /* For now, interrupt phase is fixed by the layout * of the QH lists. */ @@ -1215,7 +1364,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, qh->iso_status = 0; } - qh->skel = uhci->skel_iso_qh; + qh->skel = SKEL_ISO; if (!qh->bandwidth_reserved) uhci_reserve_bandwidth(uhci, qh); return 0; -- cgit v1.2.3