From 9a55706221812e4b609320ed41b7b149da981e51 Mon Sep 17 00:00:00 2001 From: Benoit Parrot Date: Fri, 8 May 2015 13:01:09 -0600 Subject: ARM: AM43xx: hwmod: add VPFE hwmod entries This patch adds VPFE HWMOD data for AM43xx. Signed-off-by: Benoit Parrot Signed-off-by: Darren Etheridge Signed-off-by: Felipe Balbi Signed-off-by: Lad, Prabhakar Tested-by: Benoit Parrot [paul@pwsan.com: updated to apply on v4.1-rc1] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 70 ++++++++++++++++++++++++++++++ arch/arm/mach-omap2/prcm43xx.h | 3 +- 2 files changed, 72 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index e2223148ba4d..17e8004fc20f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -544,6 +544,44 @@ static struct omap_hwmod am43xx_hdq1w_hwmod = { }, }; +static struct omap_hwmod_class_sysconfig am43xx_vpfe_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x104, + .sysc_flags = SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE, + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_SMART | MSTANDBY_NO), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class am43xx_vpfe_hwmod_class = { + .name = "vpfe", + .sysc = &am43xx_vpfe_sysc, +}; + +static struct omap_hwmod am43xx_vpfe0_hwmod = { + .name = "vpfe0", + .class = &am43xx_vpfe_hwmod_class, + .clkdm_name = "l3s_clkdm", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + .clkctrl_offs = AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET, + }, + }, +}; + +static struct omap_hwmod am43xx_vpfe1_hwmod = { + .name = "vpfe1", + .class = &am43xx_vpfe_hwmod_class, + .clkdm_name = "l3s_clkdm", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + .clkctrl_offs = AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET, + }, + }, +}; + /* Interfaces */ static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = { .master = &am33xx_l3_main_hwmod, @@ -825,6 +863,34 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__hdq1w = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = { + .master = &am43xx_vpfe0_hwmod, + .slave = &am33xx_l3_main_hwmod, + .clk = "l3_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if am43xx_l3__vpfe1 = { + .master = &am43xx_vpfe1_hwmod, + .slave = &am33xx_l3_main_hwmod, + .clk = "l3_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe0 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_vpfe0_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe1 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_vpfe1_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_wkup__synctimer, &am43xx_l4_ls__timer8, @@ -925,6 +991,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_ls__dss_dispc, &am43xx_l4_ls__dss_rfbi, &am43xx_l4_ls__hdq1w, + &am43xx_l3__vpfe0, + &am43xx_l3__vpfe1, + &am43xx_l4_ls__vpfe0, + &am43xx_l4_ls__vpfe1, NULL, }; diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h index 48df3b55057e..d0261996db6d 100644 --- a/arch/arm/mach-omap2/prcm43xx.h +++ b/arch/arm/mach-omap2/prcm43xx.h @@ -144,5 +144,6 @@ #define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0 #define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20 #define AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET 0x04a0 - +#define AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET 0x0068 +#define AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET 0x0070 #endif -- cgit v1.2.3 From 4ebf5b288c57767ad62e63c5fc0e586f0210e36c Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 5 May 2015 16:33:04 +0300 Subject: ARM: OMAP4+: PRM: add support for passing status register/bit info to reset AM43xx has slightly different reset register layout compared to OMAP4+, with varying status bit shifts and status register offsets. Current code assumes static offsets and identical status / reset control bit shifts, which is wrong. This patch adds PRM core support for passing the actual implementations from hwmod code. AM43xx mappings will be fixed in subsequent patch. Signed-off-by: Tero Kristo Reported-by: Dave Gerlach Reported-by: Suman Anna Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 12 ++++++++++-- arch/arm/mach-omap2/prminst44xx.c | 20 +++++++------------- 2 files changed, 17 insertions(+), 15 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 355b08936871..e482562075ef 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -171,6 +171,12 @@ */ #define LINKS_PER_OCP_IF 2 +/* + * Address offset (in bytes) between the reset control and the reset + * status registers: 4 bytes on OMAP4 + */ +#define OMAP4_RST_CTRL_ST_OFFSET 4 + /** * struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations * @enable_module: function to enable a module (via MODULEMODE) @@ -3016,10 +3022,12 @@ static int _omap4_deassert_hardreset(struct omap_hwmod *oh, if (ohri->st_shift) pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n", oh->name, ohri->name); - return omap_prm_deassert_hardreset(ohri->rst_shift, 0, + return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->rst_shift, oh->clkdm->pwrdm.ptr->prcm_partition, oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs, 0); + oh->prcm.omap4.rstctrl_offs, + oh->prcm.omap4.rstctrl_offs + + OMAP4_RST_CTRL_ST_OFFSET); } /** diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index c4859c4d3646..d0b15dbafa2e 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c @@ -87,12 +87,6 @@ u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst, return v; } -/* - * Address offset (in bytes) between the reset control and the reset - * status registers: 4 bytes on OMAP4 - */ -#define OMAP4_RST_CTRL_ST_OFFSET 4 - /** * omap4_prminst_is_hardreset_asserted - read the HW reset line state of * submodules contained in the hwmod module @@ -141,11 +135,11 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst, * omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and * wait * @shift: register bit shift corresponding to the reset line to deassert - * @st_shift: status bit offset, not used for OMAP4+ + * @st_shift: status bit offset corresponding to the reset line * @part: PRM partition * @inst: PRM instance offset * @rstctrl_offs: reset register offset - * @st_offs: reset status register offset, not used for OMAP4+ + * @rstst_offs: reset status register offset * * Some IPs like dsp, ipu or iva contain processors that require an HW * reset line to be asserted / deasserted in order to fully enable the @@ -157,11 +151,11 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst, * of reset, or -EBUSY if the submodule did not exit reset promptly. */ int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst, - u16 rstctrl_offs, u16 st_offs) + u16 rstctrl_offs, u16 rstst_offs) { int c; u32 mask = 1 << shift; - u16 rstst_offs = rstctrl_offs + OMAP4_RST_CTRL_ST_OFFSET; + u32 st_mask = 1 << st_shift; /* Check the current status to avoid de-asserting the line twice */ if (omap4_prminst_is_hardreset_asserted(shift, part, inst, @@ -169,13 +163,13 @@ int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst, return -EEXIST; /* Clear the reset status by writing 1 to the status bit */ - omap4_prminst_rmw_inst_reg_bits(0xffffffff, mask, part, inst, + omap4_prminst_rmw_inst_reg_bits(0xffffffff, st_mask, part, inst, rstst_offs); /* de-assert the reset control line */ omap4_prminst_rmw_inst_reg_bits(mask, 0, part, inst, rstctrl_offs); /* wait the status to be set */ - omap_test_timeout(omap4_prminst_is_hardreset_asserted(shift, part, inst, - rstst_offs), + omap_test_timeout(omap4_prminst_is_hardreset_asserted(st_shift, part, + inst, rstst_offs), MAX_MODULE_HARDRESET_WAIT, c); return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; -- cgit v1.2.3 From a5bf00cd735fbc293da8a9bada589c02861c8132 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 5 May 2015 16:33:05 +0300 Subject: ARM: AM33xx+: hwmod: re-use omap4 implementations for reset functionality The reset code functionality is mostly a copy paste between OMAP4+ and AM33xx+. Re-use the omap4 code where possible, and just keep the special implementation for de-asserting the hardreset lines for AM33xx, as AM33xx+ devices have slightly different register layouts compared to OMAP4+. This patch also fixes the hardreset issues faced on AM43xx. Signed-off-by: Tero Kristo Reported-by: Dave Gerlach Reported-by: Suman Anna Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 56 +++------------------------------------- 1 file changed, 4 insertions(+), 52 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e482562075ef..752969ff9de0 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -3055,27 +3055,6 @@ static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh, oh->prcm.omap4.rstctrl_offs); } -/** - * _am33xx_assert_hardreset - call AM33XX PRM hardreset fn with hwmod args - * @oh: struct omap_hwmod * to assert hardreset - * @ohri: hardreset line data - * - * Call am33xx_prminst_assert_hardreset() with parameters extracted - * from the hwmod @oh and the hardreset line data @ohri. Only - * intended for use as an soc_ops function pointer. Passes along the - * return value from am33xx_prminst_assert_hardreset(). XXX This - * function is scheduled for removal when the PRM code is moved into - * drivers/. - */ -static int _am33xx_assert_hardreset(struct omap_hwmod *oh, - struct omap_hwmod_rst_info *ohri) - -{ - return omap_prm_assert_hardreset(ohri->rst_shift, 0, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); -} - /** * _am33xx_deassert_hardreset - call AM33XX PRM hardreset fn with hwmod args * @oh: struct omap_hwmod * to deassert hardreset @@ -3091,32 +3070,13 @@ static int _am33xx_assert_hardreset(struct omap_hwmod *oh, static int _am33xx_deassert_hardreset(struct omap_hwmod *oh, struct omap_hwmod_rst_info *ohri) { - return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift, 0, + return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, oh->clkdm->pwrdm.ptr->prcm_offs, oh->prcm.omap4.rstctrl_offs, oh->prcm.omap4.rstst_offs); } -/** - * _am33xx_is_hardreset_asserted - call AM33XX PRM hardreset fn with hwmod args - * @oh: struct omap_hwmod * to test hardreset - * @ohri: hardreset line data - * - * Call am33xx_prminst_is_hardreset_asserted() with parameters - * extracted from the hwmod @oh and the hardreset line data @ohri. - * Only intended for use as an soc_ops function pointer. Passes along - * the return value from am33xx_prminst_is_hardreset_asserted(). XXX - * This function is scheduled for removal when the PRM code is moved - * into drivers/. - */ -static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh, - struct omap_hwmod_rst_info *ohri) -{ - return omap_prm_is_hardreset_asserted(ohri->rst_shift, 0, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); -} - /* Public functions */ u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs) @@ -3916,21 +3876,13 @@ void __init omap_hwmod_init(void) soc_ops.init_clkdm = _init_clkdm; soc_ops.update_context_lost = _omap4_update_context_lost; soc_ops.get_context_lost = _omap4_get_context_lost; - } else if (soc_is_am43xx()) { + } else if (cpu_is_ti816x() || soc_is_am33xx() || soc_is_am43xx()) { soc_ops.enable_module = _omap4_enable_module; soc_ops.disable_module = _omap4_disable_module; soc_ops.wait_target_ready = _omap4_wait_target_ready; soc_ops.assert_hardreset = _omap4_assert_hardreset; - soc_ops.deassert_hardreset = _omap4_deassert_hardreset; - soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; - soc_ops.init_clkdm = _init_clkdm; - } else if (cpu_is_ti816x() || soc_is_am33xx()) { - soc_ops.enable_module = _omap4_enable_module; - soc_ops.disable_module = _omap4_disable_module; - soc_ops.wait_target_ready = _omap4_wait_target_ready; - soc_ops.assert_hardreset = _am33xx_assert_hardreset; soc_ops.deassert_hardreset = _am33xx_deassert_hardreset; - soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted; + soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; soc_ops.init_clkdm = _init_clkdm; } else { WARN(1, "omap_hwmod: unknown SoC type\n"); -- cgit v1.2.3 From b0897972edfa42b4af5c3189b2b7a7fac5867828 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 11 May 2015 13:18:19 -0700 Subject: ARM: OMAP2+: Remove bogus struct clk comparison for timer clock With recent changes to use determine_rate, the comparison of two clocks won't work without clk_is_match that does __clk_get_hw on the clocks first. As we've been unconditionally already calling clk_set_parent already because of the bogus comparison, let's just remove the check as suggested by Stephen Boyd . Cc: Michael Turquette Cc: Paul Walmsley Cc: Tero Kristo Cc: Tomeu Vizoso Acked-by: Stephen Boyd Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/timer.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index cef67af9e9b8..cac46d852da1 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -298,14 +298,11 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, if (IS_ERR(src)) return PTR_ERR(src); - if (clk_get_parent(timer->fclk) != src) { - r = clk_set_parent(timer->fclk, src); - if (r < 0) { - pr_warn("%s: %s cannot set source\n", __func__, - oh->name); - clk_put(src); - return r; - } + r = clk_set_parent(timer->fclk, src); + if (r < 0) { + pr_warn("%s: %s cannot set source\n", __func__, oh->name); + clk_put(src); + return r; } clk_put(src); -- cgit v1.2.3