aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb
AgeCommit message (Collapse)Author
2012-08-13[media] Rename media/dvb as media/pciMauro Carvalho Chehab
The remaining dvb drivers are pci, so rename them to match the bus. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] dvb-usb: move it to drivers/media/usb/dvb-usbMauro Carvalho Chehab
As media/dvb will be removed, move it to a proper place. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] firewire: move it one level upMauro Carvalho Chehab
Move firewire to one level up, as the dvb subdirectory will be removed. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] move the dvb/frontends to drivers/media/dvb-frontendsMauro Carvalho Chehab
Raise the DVB frontends one level up, as the intention is to remove the drivers/media/dvb directory. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] dvb: move the dvb core one level upMauro Carvalho Chehab
just like the V4L2 core, move the DVB core to drivers/media, as the intention is to get rid of both "video" and "dvb" directories. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] it913x ver 1.32 driver moved to dvb-usb-v2Malcolm Priestley
Functional changes PID filter is default to off and controlled from dvb-usb-v2 Driver now supports suspend and resume changes in dvb-usb-v2 USB bus repeater functions have been removed. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] lmedm04: fix data usage past the end of the bufferMalcolm Priestley
On Mon, 2012-08-13 at 19:58 +0300, Dan Carpenter wrote: > Hello Mauro Carvalho Chehab, > > The patch db6651a9ebb3: "[media] lmedm04: fix build" from Aug 12, > 2012, leads to the following warning: > drivers/media/dvb/dvb-usb-v2/lmedm04.c:769 lme2510_download_firmware() > error: usb_control_msg() 'data' too small (128 vs 265) > > 737 data = kzalloc(128, GFP_KERNEL); > ^^^ > data is 128 bytes. Control isn't used, so remove it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] DVB: improve handling of TS packets containing a raised TEI bitMichael Krufky
When the TEI bit is raised, we should not trust any of the contents of the packet in question, including but not limited to its PID number. Considering that we don't trust the PID number of this packet, we should not proceed to check the packet counter (if dvb_demux_tscheck is set). We should expect to see at least one discontinuity after a bad packet is received, so any time a TEI is detected, a following TS packet counter mismatch is to be expected. There is no real reason to ever allow bad packets to pass through the kernel demux, other than for purposes of attempting error correction via software or statistical information. However, since we have always passed these bad packets though the demux, we should not change this default behavior. Without altering module options, this patch merely prevents the TS packet counter check on packets containing a raised TEI. If module option dvb_demux_feed_err_pkts is set to 0, the kernel demux will drop these error packets entirely, preventing any possibility of corruption caused by userspace programs that are expecting valid data. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] dvb_usb_v2: use %*ph to dump usb xfer debugsAntti Palosaari
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] dvb-usb: use %*ph to dump small buffersAndy Shevchenko
[crope@iki.fi: fix trivial merge conflict] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] dvb: use %*ph to hexdump small buffersAndy Shevchenko
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] dvb: frontends: use %*ph to dump small buffersAndy Shevchenko
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] dvb: get rid of fe_ioctl_override callbackMauro Carvalho Chehab
This callback were meant to allow overriding a FE callback, before its call, but it is not really needed, as the callback can be intercepted after tuner attachment. Worse than that, only DVBv3 calls are intercepted this way, so a DVBv5 application will produce different effects than a DVBv3 one. So, get rid of it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi>
2012-08-13[media] add DTMB support for DVB APIAntti Palosaari
Cc: Patrick Boettcher <pboettcher@kernellabs.com> Cc: Andreas Oberritter <obi@linuxtv.org> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] rtl28xxu: generalize streaming controlAntti Palosaari
Move rtl2831u LED from streaming control to power control. It changes LED behavior slightly but who cares :) After that same streaming control can be used for both rtl2831u and rtl2832u. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] rtl28xxu: convert to new DVB USBAntti Palosaari
Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-12[media] ttpci: add support for Omicom S2 PCIEvgeny Plehov
Support for yet another SAA7146-based budget card (very similar to TT S2-1600, but use LNBH23 instead ISL6423). Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-12[media] mantis: fix silly crash caseAlan Cox
If we set mantis->fe to NULL on an error its not a good idea to then try passing NULL to the unregister paths and oopsing really. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=16473 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-12[media] dvb: nxt200x: apply levels to the printk()sAndy Shevchenko
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-12[media] m88rs2000: add missing FE_HAS_SYNC flagAntti Palosaari
Cc: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-12[media] lmedm04: fix buildMauro Carvalho Chehab
Those files were at the wrong place, probably due to the usage of a previous version of dvb-usb-v2 tree. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-12[media] lmedm04 2.06 conversion to dvb-usb-v2 version 2Malcolm Priestley
Conversion of lmedm04 to dvb-usb-v2 Functional changes m88rs2000 tuner now uses all callbacks. TODO migrate other tuners to the callbacks. This patch is applied on top of [BUG] Re: dvb_usb_lmedm04 crash Kernel (rs2000) http://patchwork.linuxtv.org/patch/13584/ Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Acked-by: Antti Palosaari <crope@iki.fi> Tested-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-12[media] dvb core: remove support for post FE legacy ioctl interceptMauro Carvalho Chehab
This DVB_FE_IOCTL_POST isn't used, so remove it. Also, intercepting ioctl's like that only works with legacy ioctl's, due to the way it was implemented. so this design is broken. Document it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-12[media] dvb_usb_lmedm04: don't crash if firmware is not loadedMalcolm Priestley
There is a missing error handling when no firmware file found. It seems that this is more of a problem with udev-182+. However, so far udev-182 is only a problem on first ever plug. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Tested-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-11[media] ngene: add support for Terratec Cynergy 2400i Dual DVB-TPatrice Chotard
This code is based on ngene initial check-in (dae52d009fc950b5c209260d50fcc000f5becd3c) Signed-off-by: Patrice Chotard <patricechotard@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-11[media] dvb: add support for Thomson DTT7520XPatrice Chotard
Add support for Thomson DTT7520X pll needed by ngene card Terratec Cynergy 2400i DT Signed-off-by: Patrice Chotard <patricechotard@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-10[media] mantis: Terratec Cinergy C PCI HD (CI)Igor M. Liplianin
This patch seems for rectifying a typo. But actually the difference between mantis_vp2040.c and mantis_vp2033.c code is a card name only. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-09[media] au0828: prevent i2c gate from being kept open while in analog modeDevin Heitmueller
The original implementation of the analog support would use an i2c_gate_ctrl function when using the digital side of the au8522, but on the analog side we would always just force the gate open and leave it open all the time. This can have adverse effects on the xc5000 given the tuner is receiving all the spurious i2c traffic (a problem which can be exaggerated due to bugs in the au0828 i2c hardware implementation). Rework the existing hack to only open/close the gate when actually talking to the tuner. This logic might need to be reworked a bit if anybody ever tries to add support for a board that has the au0828/au8522 but doesn't have digital support implemented (because the i2c_gate_ctrl callback is being set in the DVB attach). However given how few different models are in circulation, this can be deferred until such a situation arises (if ever). Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-09[media] au8522: fix regression in logging introduced by separation of modulesDevin Heitmueller
The au8522 driver was broken into three modules (dig, decoder, common), and as a result the debug modprobe option doesn't work for any of the common functions. Copy the module macros over to the common module so that the debug option works again. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-09[media] au8522: Fix off-by-one in SNR table for QAM256Devin Heitmueller
The table of valid SNR values for QAM 256 is off by one, and as a result if the SNR is oscillating between 40.0 and 39.9 dB, tools like azap show it going back and forth between 40.0 and 0 (misleading some people, including myself, to think signal lock is being lost or there is a problem with register reads). Fix the table so that 40.0 dB is properly represented. Cc: Steven Toth <stoth@kernellabs.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-09[media] au8522: fix intermittent lockup of analog video decoderDevin Heitmueller
It turns up the autodetection for the video standard in the au8522 is prone to hanging the chip until a reset is performed. This condition is trivial to reproduce simply by tuning to a station and then rapidly unplugging/ replugging the coax feed. Because we've never claimed to support anything other than NTSC-M, just disable the video-standard autodetection logic and force it to always be NTSC-M. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-06[media] az6007: Update copyrightMauro Carvalho Chehab
Update copyright comments after dvb-usb-v2 conversion. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-06[media] az6007: handle CI during suspend/resumeMauro Carvalho Chehab
The dvb-usb-v2 core doesn't know anything about CI. So, the driver needs to handle it by hand. This patch stops CI just before stopping URB's/RC, and restarts it before URB/RC start. It should be noticed that suspend/resume is not yet working properly, as the PM model requires the implementation of reset_resume: dvb_usb_az6007 1-6:1.0: no reset_resume for driver dvb_usb_az6007? But this is not implemented there at dvb-usb-v2 yet. Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-06[media] az6007: make all functions staticMauro Carvalho Chehab
There's no reason why those functions shouldn't be static. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-06[media] az6007: rename "st" to "state" at az6007_power_ctrl()Mauro Carvalho Chehab
On all other parts, this var is called state. So, use the same name here, to be consistent. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-06[media] az6007: Fix the number of parameters for QAM setupMauro Carvalho Chehab
Remove those warning messages: [ 121.696758] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params: [ 121.703401] drxk: 02 00 00 00 10 00 07 00 03 02 .......... [ 121.703587] drxk: Warning -22 on QAMDemodulatorCommand Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-06[media] az6007: fix the I2C W+R logicMauro Carvalho Chehab
The test for I2C W+R will never be true. Fix it. Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-06[media] az6007: convert it to use dvb-usb-v2Mauro Carvalho Chehab
Change it to use dvb-usb-v2. The driver should be working as before. The only functional changes should be at the driver debug logs. This driver needs the cypress firmware load, so, auto-selects it. Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-06[media] dvb-usb-v2: Don't ask user to select Cypress firmware moduleMauro Carvalho Chehab
The dvb-usb-v2 cypress firmware module is not optional, as drivers won't work without it. So, instead of opening a menu for the user to manually select, let the drivers that need it to select, hiding this option from the Kconfig menu. Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-06[media] dvb-usb-v2: Fix cypress firmware compilationMauro Carvalho Chehab
ERROR: "usbv2_cypress_load_firmware" [drivers/media/dvb/dvb-usb-v2/dvb-usb-az6007.ko] undefined! Cypress fimware will never be compiled properly, as the Makefile rule is wrong. Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-05[media] move dvb-usb-ids.h to dvb-coreMauro Carvalho Chehab
While this header were meant to be used just by dvb-usb driver, it is now being used also by dvb-usb-v2 and cx231xx. So, move it to a better place. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-04[media] dvb_usbv2: rename dvb_usb_firmware to cypress_firmwareAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-04[media] af9015: remote controller fixesAntti Palosaari
1) AF9015 remote controller query will fail rarely due to register access failures and dvb_usb_v2 will stop rc polling when error returned. Add logic to allow errors until two consecutive errors occurs. 2) Remote controller key map was not loaded in case of key map was set as a device property. Fix it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-04[media] dvb_usb_v2: move from dvb-usb to dvb-usb-v2Antti Palosaari
Move to own directory. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-04[media] gl861: convert to new DVB USBAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-04[media] mxl111sf: convert to new DVB USBAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-04[media] dvb_usb_v2: register device even no remote keymap definedAntti Palosaari
It failed to register device when remote keymap was not set. Fix it to register device even keymap is NULL. In that case just skip remote registration. Driver should set RC_MAP_EMPTY to enable remote in case of there is remote receiver but default keymap is unknown. Reported-by: pierigno <pierigno@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-04[media] dvb_usb_v2: remove usb_clear_halt() from streamAntti Palosaari
It works no longer as it was designed since we can change streaming configuration during device operation. Maybe it should be performed conditionally on cases when streaming endpoint is changed. Anyhow, let it out now and add later if needed. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-04[media] dvb_usb_v2: do not try to remove non-existent adapterAntti Palosaari
Check that adapter exists before trying to remove it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-04[media] dvb_usb_v2: use dev_* logging macrosAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>