Merge branch 'linux-linaro-lsk-v3.18' into linux-linaro-lsk-v3.18-android

* linux-linaro-lsk-v3.18: (237 commits)
  Linux 3.18.19
  x86/xen: allow privcmd hypercalls to be preempted
  rtnl: restore notifications for deleted interfaces
  Input: synaptics - add min/max quirk for Lenovo S540
  Revert "Input: synaptics - add min/max quirk for Lenovo S540"
  Revert "nfs: take extra reference to fl->fl_file when running a LOCKU operation"
  fs/ufs: restore s_lock mutex_init()
  ufs: Fix possible deadlock when looking up directories
  ufs: Fix warning from unlock_new_inode()
  vfs: Ignore unlocked mounts in fs_fully_visible
  KVM: x86: properly restore LVT0
  KVM: s390: virtio-ccw: don't overwrite config space values
  selinux: fix setting of security labels on NFS
  usb: gadget: f_fs: add extra check before unregister_gadget_item
  perf/x86: Honor the architectural performance monitoring version
  perf: Fix ring_buffer_attach() RCU sync, again
  x86/boot: Fix overflow warning with 32-bit binutils
  vfs: Remove incorrect debugging WARN in prepend_path
  KVM: x86: make vapics_in_nmi_mode atomic
  arm: KVM: force execution of HCPTR access on VM exit
  ...

Conflicts:
	security/selinux/hooks.c

Resolution summary:

  Conflict between upstream LTS commit f0f61c29dfb0 (selinux: fix
  setting of security labels on NFS) and android-3.18 commit 96f8
  bcf4a398 (pstore: selinux: add security in-core xattr support for
  pstore and debugfs.)  Resolution: simple combination.

8 files changed, 63 insertions, 52 deletions

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 12d37aedc66f..7d8c3d4ede20 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1486,6 +1486,11 @@ skip_countries:
 		goto alloc_fail8;
 	}
 
+	if (quirks & CLEAR_HALT_CONDITIONS) {
+		usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress));
+		usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress));
+	}
+
 	return 0;
 alloc_fail8:
 	if (acm->country_codes) {
@@ -1763,6 +1768,10 @@ static const struct usb_device_id acm_ids[] = {
 	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
 	},
 
+	{ USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */
+	.driver_info = CLEAR_HALT_CONDITIONS,
+	},
+
 	/* Nokia S60 phones expose two ACM channels. The first is
 	 * a modem and is picked up by the standard AT-command
 	 * information below. The second is 'vendor-specific' but
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index d3251ebd09e2..9cca2e7280bb 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -134,3 +134,4 @@ struct acm {
 #define NO_DATA_INTERFACE		BIT(4)
 #define IGNORE_DEVICE			BIT(5)
 #define QUIRK_CONTROL_LINE_STATE	BIT(6)
+#define CLEAR_HALT_CONDITIONS		BIT(7)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 85e03cb0c418..2222899c4b69 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2613,9 +2613,6 @@ static bool use_new_scheme(struct usb_device *udev, int retry)
 	return USE_NEW_SCHEME(retry);
 }
 
-static int hub_port_reset(struct usb_hub *hub, int port1,
-			struct usb_device *udev, unsigned int delay, bool warm);
-
 /* Is a USB 3.0 port in the Inactive or Compliance Mode state?
  * Port worm reset is required to recover
  */
@@ -2703,44 +2700,6 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 	return 0;
 }
 
-static void hub_port_finish_reset(struct usb_hub *hub, int port1,
-			struct usb_device *udev, int *status)
-{
-	switch (*status) {
-	case 0:
-		/* TRSTRCY = 10 ms; plus some extra */
-		msleep(10 + 40);
-		if (udev) {
-			struct usb_hcd *hcd = bus_to_hcd(udev->bus);
-
-			update_devnum(udev, 0);
-			/* The xHC may think the device is already reset,
-			 * so ignore the status.
-			 */
-			if (hcd->driver->reset_device)
-				hcd->driver->reset_device(hcd, udev);
-		}
-		/* FALL THROUGH */
-	case -ENOTCONN:
-	case -ENODEV:
-		usb_clear_port_feature(hub->hdev,
-				port1, USB_PORT_FEAT_C_RESET);
-		if (hub_is_superspeed(hub->hdev)) {
-			usb_clear_port_feature(hub->hdev, port1,
-					USB_PORT_FEAT_C_BH_PORT_RESET);
-			usb_clear_port_feature(hub->hdev, port1,
-					USB_PORT_FEAT_C_PORT_LINK_STATE);
-			usb_clear_port_feature(hub->hdev, port1,
-					USB_PORT_FEAT_C_CONNECTION);
-		}
-		if (udev)
-			usb_set_device_state(udev, *status
-					? USB_STATE_NOTATTACHED
-					: USB_STATE_DEFAULT);
-		break;
-	}
-}
-
 /* Handle port reset and port warm(BH) reset (for USB3 protocol ports) */
 static int hub_port_reset(struct usb_hub *hub, int port1,
 			struct usb_device *udev, unsigned int delay, bool warm)
@@ -2764,13 +2723,10 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 		 * If the caller hasn't explicitly requested a warm reset,
 		 * double check and see if one is needed.
 		 */
-		status = hub_port_status(hub, port1,
-					&portstatus, &portchange);
-		if (status < 0)
-			goto done;
-
-		if (hub_port_warm_reset_required(hub, port1, portstatus))
-			warm = true;
+		if (hub_port_status(hub, port1, &portstatus, &portchange) == 0)
+			if (hub_port_warm_reset_required(hub, port1,
+							portstatus))
+				warm = true;
 	}
 	clear_bit(port1, hub->warm_reset_bits);
 
@@ -2796,11 +2752,19 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 
 		/* Check for disconnect or reset */
 		if (status == 0 || status == -ENOTCONN || status == -ENODEV) {
-			hub_port_finish_reset(hub, port1, udev, &status);
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_RESET);
 
 			if (!hub_is_superspeed(hub->hdev))
 				goto done;
 
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_PORT_LINK_STATE);
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_CONNECTION);
+
 			/*
 			 * If a USB 3.0 device migrates from reset to an error
 			 * state, re-issue the warm reset.
@@ -2833,6 +2797,26 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 	dev_err(&port_dev->dev, "Cannot enable. Maybe the USB cable is bad?\n");
 
 done:
+	if (status == 0) {
+		/* TRSTRCY = 10 ms; plus some extra */
+		msleep(10 + 40);
+		if (udev) {
+			struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+			update_devnum(udev, 0);
+			/* The xHC may think the device is already reset,
+			 * so ignore the status.
+			 */
+			if (hcd->driver->reset_device)
+				hcd->driver->reset_device(hcd, udev);
+
+			usb_set_device_state(udev, USB_STATE_DEFAULT);
+		}
+	} else {
+		if (udev)
+			usb_set_device_state(udev, USB_STATE_NOTATTACHED);
+	}
+
 	if (!hub_is_superspeed(hub->hdev))
 		up_read(&ehci_cf_port_reset_rwsem);
 
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 272e0928736e..d98faf73d6b2 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -289,6 +289,8 @@ int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param)
 		if (!(reg & DWC3_DGCMD_CMDACT)) {
 			dev_vdbg(dwc->dev, "Command Complete --> %d\n",
 					DWC3_DGCMD_STATUS(reg));
+			if (DWC3_DGCMD_STATUS(reg))
+				return -EINVAL;
 			return 0;
 		}
 
@@ -322,6 +324,8 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
 		if (!(reg & DWC3_DEPCMD_CMDACT)) {
 			dev_vdbg(dwc->dev, "Command Complete --> %d\n",
 					DWC3_DEPCMD_STATUS(reg));
+			if (DWC3_DEPCMD_STATUS(reg))
+				return -EINVAL;
 			return 0;
 		}
 
@@ -1899,12 +1903,16 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
 {
 	unsigned		status = 0;
 	int			clean_busy;
+	u32			is_xfer_complete;
+
+	is_xfer_complete = (event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE);
 
 	if (event->status & DEPEVT_STATUS_BUSERR)
 		status = -ECONNRESET;
 
 	clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
-	if (clean_busy)
+	if (clean_busy && (is_xfer_complete ||
+				usb_endpoint_xfer_isoc(dep->endpoint.desc)))
 		dep->flags &= ~DWC3_EP_BUSY;
 
 	/*
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 1ae48e05639b..45207e2246c0 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -3486,6 +3486,7 @@ done:
 static void ffs_closed(struct ffs_data *ffs)
 {
 	struct ffs_dev *ffs_obj;
+	struct f_fs_opts *opts;
 
 	ENTER();
 	ffs_dev_lock();
@@ -3499,8 +3500,13 @@ static void ffs_closed(struct ffs_data *ffs)
 	if (ffs_obj->ffs_closed_callback)
 		ffs_obj->ffs_closed_callback(ffs);
 
-	if (!ffs_obj->opts || ffs_obj->opts->no_configfs
-	    || !ffs_obj->opts->func_inst.group.cg_item.ci_parent)
+	if (ffs_obj->opts)
+		opts = ffs_obj->opts;
+	else
+		goto done;
+
+	if (opts->no_configfs || !opts->func_inst.group.cg_item.ci_parent
+	    || !atomic_read(&opts->func_inst.group.cg_item.ci_kref.refcount))
 		goto done;
 
 	unregister_gadget_item(ffs_obj->opts->
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 9031750e7404..ffd739e31bfc 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -128,6 +128,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
 	{ USB_DEVICE(0x10C4, 0x8977) },	/* CEL MeshWorks DevKit Device */
 	{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
+	{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8eb68a31cab6..4c8b3b82103d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -699,6 +699,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_DONGLE_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
 	{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 4e4f46f3c89c..792e054126de 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -155,6 +155,7 @@
 #define XSENS_AWINDA_STATION_PID 0x0101
 #define XSENS_AWINDA_DONGLE_PID 0x0102
 #define XSENS_MTW_PID		0x0200	/* Xsens MTw */
+#define XSENS_MTDEVBOARD_PID	0x0300	/* Motion Tracker Development Board */
 #define XSENS_CONVERTER_PID	0xD00D	/* Xsens USB-serial converter */
 
 /* Xsens devices using FTDI VID */