Merge tag 'v3.14.20' into v3.14-rt

This is the 3.14.20 stable release

11 files changed, 64 insertions, 15 deletions

diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h
index 8596aba34f96..237d0cda1bcb 100644
--- a/drivers/net/wireless/ath/carl9170/carl9170.h
+++ b/drivers/net/wireless/ath/carl9170/carl9170.h
@@ -256,6 +256,7 @@ struct ar9170 {
 	atomic_t rx_work_urbs;
 	atomic_t rx_pool_urbs;
 	kernel_ulong_t features;
+	bool usb_ep_cmd_is_bulk;
 
 	/* firmware settings */
 	struct completion fw_load_wait;
diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c
index ca115f33746f..bc931f6f1f0f 100644
--- a/drivers/net/wireless/ath/carl9170/usb.c
+++ b/drivers/net/wireless/ath/carl9170/usb.c
@@ -621,9 +621,16 @@ int __carl9170_exec_cmd(struct ar9170 *ar, struct carl9170_cmd *cmd,
 		goto err_free;
 	}
 
-	usb_fill_int_urb(urb, ar->udev, usb_sndintpipe(ar->udev,
-		AR9170_USB_EP_CMD), cmd, cmd->hdr.len + 4,
-		carl9170_usb_cmd_complete, ar, 1);
+	if (ar->usb_ep_cmd_is_bulk)
+		usb_fill_bulk_urb(urb, ar->udev,
+				  usb_sndbulkpipe(ar->udev, AR9170_USB_EP_CMD),
+				  cmd, cmd->hdr.len + 4,
+				  carl9170_usb_cmd_complete, ar);
+	else
+		usb_fill_int_urb(urb, ar->udev,
+				 usb_sndintpipe(ar->udev, AR9170_USB_EP_CMD),
+				 cmd, cmd->hdr.len + 4,
+				 carl9170_usb_cmd_complete, ar, 1);
 
 	if (free_buf)
 		urb->transfer_flags |= URB_FREE_BUFFER;
@@ -1032,9 +1039,10 @@ static void carl9170_usb_firmware_step2(const struct firmware *fw,
 static int carl9170_usb_probe(struct usb_interface *intf,
 			      const struct usb_device_id *id)
 {
+	struct usb_endpoint_descriptor *ep;
 	struct ar9170 *ar;
 	struct usb_device *udev;
-	int err;
+	int i, err;
 
 	err = usb_reset_device(interface_to_usbdev(intf));
 	if (err)
@@ -1050,6 +1058,21 @@ static int carl9170_usb_probe(struct usb_interface *intf,
 	ar->intf = intf;
 	ar->features = id->driver_info;
 
+	/* We need to remember the type of endpoint 4 because it differs
+	 * between high- and full-speed configuration. The high-speed
+	 * configuration specifies it as interrupt and the full-speed
+	 * configuration as bulk endpoint. This information is required
+	 * later when sending urbs to that endpoint.
+	 */
+	for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; ++i) {
+		ep = &intf->cur_altsetting->endpoint[i].desc;
+
+		if (usb_endpoint_num(ep) == AR9170_USB_EP_CMD &&
+		    usb_endpoint_dir_out(ep) &&
+		    usb_endpoint_type(ep) == USB_ENDPOINT_XFER_BULK)
+			ar->usb_ep_cmd_is_bulk = true;
+	}
+
 	usb_set_intfdata(intf, ar);
 	SET_IEEE80211_DEV(ar->hw, &intf->dev);
 
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
index fad77dd2a3a5..3f9cb894d001 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c
@@ -185,7 +185,13 @@ static void brcmf_fweh_handle_if_event(struct brcmf_pub *drvr,
 		  ifevent->action, ifevent->ifidx, ifevent->bssidx,
 		  ifevent->flags, ifevent->role);
 
-	if (ifevent->flags & BRCMF_E_IF_FLAG_NOIF) {
+	/* The P2P Device interface event must not be ignored
+	 * contrary to what firmware tells us. The only way to
+	 * distinguish the P2P Device is by looking at the ifidx
+	 * and bssidx received.
+	 */
+	if (!(ifevent->ifidx == 0 && ifevent->bssidx == 1) &&
+	    (ifevent->flags & BRCMF_E_IF_FLAG_NOIF)) {
 		brcmf_dbg(EVENT, "event can be ignored\n");
 		return;
 	}
@@ -210,12 +216,12 @@ static void brcmf_fweh_handle_if_event(struct brcmf_pub *drvr,
 				return;
 	}
 
-	if (ifevent->action == BRCMF_E_IF_CHANGE)
+	if (ifp && ifevent->action == BRCMF_E_IF_CHANGE)
 		brcmf_fws_reset_interface(ifp);
 
 	err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data);
 
-	if (ifevent->action == BRCMF_E_IF_DEL) {
+	if (ifp && ifevent->action == BRCMF_E_IF_DEL) {
 		brcmf_fws_del_interface(ifp);
 		brcmf_del_if(drvr, ifevent->bssidx);
 	}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h
index 51b53a73d074..d26b47698f68 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h
@@ -167,6 +167,8 @@ enum brcmf_fweh_event_code {
 #define BRCMF_E_IF_ROLE_STA			0
 #define BRCMF_E_IF_ROLE_AP			1
 #define BRCMF_E_IF_ROLE_WDS			2
+#define BRCMF_E_IF_ROLE_P2P_GO			3
+#define BRCMF_E_IF_ROLE_P2P_CLIENT		4
 
 /**
  * definitions for event packet validation.
diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c
index c1e311341b74..503a81e58185 100644
--- a/drivers/net/wireless/iwlwifi/dvm/rxon.c
+++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c
@@ -1068,6 +1068,13 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
 	/* recalculate basic rates */
 	iwl_calc_basic_rates(priv, ctx);
 
+	/*
+	 * force CTS-to-self frames protection if RTS-CTS is not preferred
+	 * one aggregation protection method
+	 */
+	if (!priv->hw_params.use_rts_for_aggregation)
+		ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
+
 	if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) ||
 	    !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK))
 		ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
@@ -1473,6 +1480,11 @@ void iwlagn_bss_info_changed(struct ieee80211_hw *hw,
 	else
 		ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
 
+	if (bss_conf->use_cts_prot)
+		ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
+	else
+		ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
+
 	memcpy(ctx->staging.bssid_addr, bss_conf->bssid, ETH_ALEN);
 
 	if (vif->type == NL80211_IFTYPE_AP ||
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index 1ced525157dc..b45d78f53f08 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -119,6 +119,8 @@ enum iwl_led_mode {
 #define IWL_LONG_WD_TIMEOUT	10000
 #define IWL_MAX_WD_TIMEOUT	120000
 
+#define IWL_DEFAULT_MAX_TX_POWER 22
+
 /* Antenna presence definitions */
 #define	ANT_NONE	0x0
 #define	ANT_A		BIT(0)
diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
index 725e954d8475..3c3eb7842c62 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -118,8 +118,6 @@ static const u8 iwl_nvm_channels[] = {
 #define LAST_2GHZ_HT_PLUS	9
 #define LAST_5GHZ_HT		161
 
-#define DEFAULT_MAX_TX_POWER 16
-
 /* rate data (static) */
 static struct ieee80211_rate iwl_cfg80211_rates[] = {
 	{ .bitrate = 1 * 10, .hw_value = 0, .hw_value_short = 0, },
@@ -242,7 +240,7 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
 		 * Default value - highest tx power value.  max_power
 		 * is not used in mvm, and is used for backwards compatibility
 		 */
-		channel->max_power = DEFAULT_MAX_TX_POWER;
+		channel->max_power = IWL_DEFAULT_MAX_TX_POWER;
 		is_5ghz = channel->band == IEEE80211_BAND_5GHZ;
 		IWL_DEBUG_EEPROM(dev,
 				 "Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n",
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 989d7dbdca6c..d0a04779d734 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -1415,14 +1415,14 @@ enum iwl_sf_scenario {
 
 /**
  * Smart Fifo configuration command.
- * @state: smart fifo state, types listed in iwl_sf_sate.
+ * @state: smart fifo state, types listed in enum %iwl_sf_sate.
  * @watermark: Minimum allowed availabe free space in RXF for transient state.
  * @long_delay_timeouts: aging and idle timer values for each scenario
  * in long delay state.
  * @full_on_timeouts: timer values for each scenario in full on state.
  */
 struct iwl_sf_cfg_cmd {
-	enum iwl_sf_state state;
+	__le32 state;
 	__le32 watermark[SF_TRANSIENT_STATES_NUMBER];
 	__le32 long_delay_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
 	__le32 full_on_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
diff --git a/drivers/net/wireless/iwlwifi/mvm/sf.c b/drivers/net/wireless/iwlwifi/mvm/sf.c
index 88809b2d1654..dab8fd13857a 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sf.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sf.c
@@ -172,7 +172,7 @@ static int iwl_mvm_sf_config(struct iwl_mvm *mvm, u8 sta_id,
 			     enum iwl_sf_state new_state)
 {
 	struct iwl_sf_cfg_cmd sf_cmd = {
-		.state = new_state,
+		.state = cpu_to_le32(new_state),
 	};
 	struct ieee80211_sta *sta;
 	int ret = 0;
diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
index 76ee486039d7..2ca62af3f81b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -173,10 +173,14 @@ static void iwl_mvm_set_tx_cmd_rate(struct iwl_mvm *mvm,
 
 	/*
 	 * for data packets, rate info comes from the table inside the fw. This
-	 * table is controlled by LINK_QUALITY commands
+	 * table is controlled by LINK_QUALITY commands. Exclude ctrl port
+	 * frames like EAPOLs which should be treated as mgmt frames. This
+	 * avoids them being sent initially in high rates which increases the
+	 * chances for completion of the 4-Way handshake.
 	 */
 
-	if (ieee80211_is_data(fc) && sta) {
+	if (ieee80211_is_data(fc) && sta &&
+	    !(info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO)) {
 		tx_cmd->initial_rate_index = 0;
 		tx_cmd->tx_flags |= cpu_to_le32(TX_CMD_FLG_STA_RATE);
 		return;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index c61311084d7e..f58316769159 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -317,6 +317,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
 	{RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
 	{RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
 	{RTL_USB_DEVICE(0x0df6, 0x005c, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
+	{RTL_USB_DEVICE(0x0df6, 0x0070, rtl92cu_hal_cfg)}, /*Sitecom - 150N */
 	{RTL_USB_DEVICE(0x0df6, 0x0077, rtl92cu_hal_cfg)}, /*Sitecom-WLA2100V2*/
 	{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
 	{RTL_USB_DEVICE(0x4856, 0x0091, rtl92cu_hal_cfg)}, /*NetweeN - Feixun*/