Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM updates from Russell King:
 "Included in this series are:

   1. BE8 (modern big endian) changes for ARM from Ben Dooks
   2. big.Little support from Nicolas Pitre and Dave Martin
   3. support for LPAE systems with all system memory above 4GB
   4. Perf updates from Will Deacon
   5. Additional prefetching and other performance improvements from Will.
   6. Neon-optimised AES implementation fro Ard.
   7. A number of smaller fixes scattered around the place.

  There is a rather horrid merge conflict in tools/perf - I was never
  notified of the conflict because it originally occurred between Will's
  tree and other stuff.  Consequently I have a resolution which Will
  forwarded me, which I'll forward on immediately after sending this
  mail.

  The other notable thing is I'm expecting some build breakage in the
  crypto stuff on ARM only with Ard's AES patches.  These were merged
  into a stable git branch which others had already pulled, so there's
  little I can do about this.  The problem is caused because these
  patches have a dependency on some code in the crypto git tree - I
  tried requesting a branch I can pull to resolve these, and all I got
  each time from the crypto people was "we'll revert our patches then"
  which would only make things worse since I still don't have the
  dependent patches.  I've no idea what's going on there or how to
  resolve that, and since I can't split these patches from the rest of
  this pull request, I'm rather stuck with pushing this as-is or
  reverting Ard's patches.

  Since it should "come out in the wash" I've left them in - the only
  build problems they seem to cause at the moment are with randconfigs,
  and since it's a new feature anyway.  However, if by -rc1 the
  dependencies aren't in, I think it'd be best to revert Ard's patches"

I resolved the perf conflict roughly as per the patch sent by Russell,
but there may be some differences.  Any errors are likely mine.  Let's
see how the crypto issues work out..

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits)
  ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"
  ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg().
  ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h
  ARM: 7871/1: amba: Extend number of IRQS
  ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise()
  ARM: 7872/1: Support arch_irq_work_raise() via self IPIs
  ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode
  ARM: 7878/1: nommu: Implement dummy early_paging_init()
  ARM: 7876/1: clear Thumb-2 IT state on exception handling
  ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}()
  ARM: footbridge: fix build warnings for netwinder
  ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu
  ARM: fix misplaced arch_virt_to_idmap()
  ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown
  ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation
  ARM: 7869/1: remove unused XSCALE_PMU Kconfig param
  ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t
  ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments
  ARM: 7862/1: pcpu: replace __get_cpu_var_uses
  ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
  ...

3 files changed, 52 insertions, 0 deletions

diff --git a/arch/arm/include/debug/efm32.S b/arch/arm/include/debug/efm32.S
new file mode 100644
index 000000000000..2265a199280c
--- /dev/null
+++ b/arch/arm/include/debug/efm32.S
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2013 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define UARTn_CMD		0x000c
+#define UARTn_CMD_TXEN			0x0004
+
+#define	UARTn_STATUS		0x0010
+#define	UARTn_STATUS_TXC		0x0020
+#define	UARTn_STATUS_TXBL		0x0040
+
+#define	UARTn_TXDATA		0x0034
+
+		.macro	addruart, rx, tmp
+		ldr	\rx, =(CONFIG_DEBUG_UART_PHYS)
+
+		/*
+		 * enable TX. The driver might disable it to save energy. We
+		 * don't care about disabling at the end as during debug power
+		 * consumption isn't that important.
+		 */
+		ldr	\tmp, =(UARTn_CMD_TXEN)
+		str	\tmp, [\rx, #UARTn_CMD]
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #UARTn_TXDATA]
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #UARTn_STATUS]
+		tst	\rd, #UARTn_STATUS_TXBL
+		beq	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, UARTn_STATUS]
+		tst	\rd, #UARTn_STATUS_TXC
+		bne	1001b
+		.endm
diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S
index 9166e1bc470e..9d653d475903 100644
--- a/arch/arm/include/debug/msm.S
+++ b/arch/arm/include/debug/msm.S
@@ -46,6 +46,11 @@
 #define MSM_DEBUG_UART_PHYS	0x16440000
 #endif
 
+#ifdef CONFIG_DEBUG_MSM8974_UART
+#define MSM_DEBUG_UART_BASE	0xFA71E000
+#define MSM_DEBUG_UART_PHYS	0xF991E000
+#endif
+
 	.macro	addruart, rp, rv, tmp
 #ifdef MSM_DEBUG_UART_PHYS
 	ldr	\rp, =MSM_DEBUG_UART_PHYS
diff --git a/arch/arm/include/debug/pl01x.S b/arch/arm/include/debug/pl01x.S
index 37c6895b87e6..92ef808a2337 100644
--- a/arch/arm/include/debug/pl01x.S
+++ b/arch/arm/include/debug/pl01x.S
@@ -25,12 +25,14 @@
 
 		.macro	waituart,rd,rx
 1001:		ldr	\rd, [\rx, #UART01x_FR]
+ ARM_BE8(	rev	\rd, \rd )
 		tst	\rd, #UART01x_FR_TXFF
 		bne	1001b
 		.endm
 
 		.macro	busyuart,rd,rx
 1001:		ldr	\rd, [\rx, #UART01x_FR]
+ ARM_BE8(	rev	\rd, \rd )
 		tst	\rd, #UART01x_FR_BUSY
 		bne	1001b
 		.endm