aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2015-10-22sched/preempt, xen: Use need_resched() instead of should_resched()Konstantin Khlebnikov
commit 0fa2f5cb2b0ecd8d56baa51f35f09aab234eb0bf upstream. This code is used only when CONFIG_PREEMPT=n and only in non-atomic context: xen_in_preemptible_hcall is set only in privcmd_ioctl_hypercall(). Thus preempt_count is zero and should_resched() is equal to need_resched(). Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Graf <agraf@suse.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150715095201.12246.49283.stgit@buzz Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andre Tomt <andre@tomt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-223w-9xxx: don't unmap bounce buffered commandsChristoph Hellwig
commit 15e3d5a285ab9283136dba34bbf72886d9146706 upstream. 3w controller don't dma map small single SGL entry commands but instead bounce buffer them. Add a helper to identify these commands and don't call scsi_dma_unmap for them. Based on an earlier patch from James Bottomley. Fixes: 118c85 ("3w-9xxx: fix command completion race") Reported-by: Tóth Attila <atoth@atoth.sote.hu> Tested-by: Tóth Attila <atoth@atoth.sote.hu> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22e1000e: Fix tight loop implementation of systime read algorithmRaanan Avargil
commit 37b12910dd11d9ab969f2c310dc9160b7f3e3405 upstream. Change the algorithm. Read systimel twice and check for overflow. If there was no overflow, use the first value. If there was an overflow, read systimeh again and use the second systimel value. Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22serial: atmel: fix error path of probe functionUwe Kleine-König
commit 8f1bd8f2ad2358d6a88c115481ff3e69817d1bde upstream. If atmel_init_gpios fails the port has already been marked as busy (in line 2629), so this must be undone in the error path. This bug was introduced because I created the patch that finally became 722ccf416ac2 ("serial: atmel: fix error handling when mctrl_gpio_init fails") on top of 3.19 which didn't have commit 6fbb9bdf0f3f ("tty/serial: at91: fix error handling in atmel_serial_probe()") yet. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 722ccf416ac2 ("serial: atmel: fix error handling when mctrl_gpio_init fails") Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22serial: 8250: add uart_config entry for PORT_RT2880Mans Rullgard
commit 3c5a0357fdb3a9116a48dbdb0abb91fd23fbff80 upstream. This adds an entry to the uart_config table for PORT_RT2880 enabling rx/tx FIFOs. The UART is actually a Palmchip BK-3103 which is found in several devices from Alchemy/RMI, Ralink, and Sigma Designs. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22drivers/tty: require read access for controlling terminalJann Horn
commit 0c55627167870255158db1cde0d28366f91c8872 upstream. This is mostly a hardening fix, given that write-only access to other users' ttys is usually only given through setgid tty executables. Signed-off-by: Jann Horn <jann@thejh.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22tty: fix stall caused by missing memory barrier in drivers/tty/n_tty.cKosuke Tatsukawa
commit e81107d4c6bd098878af9796b24edc8d4a9524fd upstream. My colleague ran into a program stall on a x86_64 server, where n_tty_read() was waiting for data even if there was data in the buffer in the pty. kernel stack for the stuck process looks like below. #0 [ffff88303d107b58] __schedule at ffffffff815c4b20 #1 [ffff88303d107bd0] schedule at ffffffff815c513e #2 [ffff88303d107bf0] schedule_timeout at ffffffff815c7818 #3 [ffff88303d107ca0] wait_woken at ffffffff81096bd2 #4 [ffff88303d107ce0] n_tty_read at ffffffff8136fa23 #5 [ffff88303d107dd0] tty_read at ffffffff81368013 #6 [ffff88303d107e20] __vfs_read at ffffffff811a3704 #7 [ffff88303d107ec0] vfs_read at ffffffff811a3a57 #8 [ffff88303d107f00] sys_read at ffffffff811a4306 #9 [ffff88303d107f50] entry_SYSCALL_64_fastpath at ffffffff815c86d7 There seems to be two problems causing this issue. First, in drivers/tty/n_tty.c, __receive_buf() stores the data and updates ldata->commit_head using smp_store_release() and then checks the wait queue using waitqueue_active(). However, since there is no memory barrier, __receive_buf() could return without calling wake_up_interactive_poll(), and at the same time, n_tty_read() could start to wait in wait_woken() as in the following chart. __receive_buf() n_tty_read() ------------------------------------------------------------------------ if (waitqueue_active(&tty->read_wait)) /* Memory operations issued after the RELEASE may be completed before the RELEASE operation has completed */ add_wait_queue(&tty->read_wait, &wait); ... if (!input_available_p(tty, 0)) { smp_store_release(&ldata->commit_head, ldata->read_head); ... timeout = wait_woken(&wait, TASK_INTERRUPTIBLE, timeout); ------------------------------------------------------------------------ The second problem is that n_tty_read() also lacks a memory barrier call and could also cause __receive_buf() to return without calling wake_up_interactive_poll(), and n_tty_read() to wait in wait_woken() as in the chart below. __receive_buf() n_tty_read() ------------------------------------------------------------------------ spin_lock_irqsave(&q->lock, flags); /* from add_wait_queue() */ ... if (!input_available_p(tty, 0)) { /* Memory operations issued after the RELEASE may be completed before the RELEASE operation has completed */ smp_store_release(&ldata->commit_head, ldata->read_head); if (waitqueue_active(&tty->read_wait)) __add_wait_queue(q, wait); spin_unlock_irqrestore(&q->lock,flags); /* from add_wait_queue() */ ... timeout = wait_woken(&wait, TASK_INTERRUPTIBLE, timeout); ------------------------------------------------------------------------ There are also other places in drivers/tty/n_tty.c which have similar calls to waitqueue_active(), so instead of adding many memory barrier calls, this patch simply removes the call to waitqueue_active(), leaving just wake_up*() behind. This fixes both problems because, even though the memory access before or after the spinlocks in both wake_up*() and add_wait_queue() can sneak into the critical section, it cannot go past it and the critical section assures that they will be serialized (please see "INTER-CPU ACQUIRING BARRIER EFFECTS" in Documentation/memory-barriers.txt for a better explanation). Moreover, the resulting code is much simpler. Latency measurement using a ping-pong test over a pty doesn't show any visible performance drop. Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22staging: speakup: fix speakup-r regressioncovici@ccs.covici.com
commit b1d562acc78f0af46de0dfe447410bc40bdb7ece upstream. Here is a patch to make speakup-r work again. It broke in 3.6 due to commit 4369c64c79a22b98d3b7eff9d089196cd878a10a "Input: Send events one packet at a time) The problem was that the fakekey.c routine to fake a down arrow no longer functioned properly and putting the input_sync fixed it. Fixes: 4369c64c79a22b98d3b7eff9d089196cd878a10a Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: John Covici <covici@ccs.covici.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22dm cache: fix NULL pointer when switching from cleaner policyJoe Thornber
commit 2bffa1503c5c06192eb1459180fac4416575a966 upstream. The cleaner policy doesn't make use of the per cache block hint space in the metadata (unlike the other policies). When switching from the cleaner policy to mq or smq a NULL pointer crash (in dm_tm_new_block) was observed. The crash was caused by bugs in dm-cache-metadata.c when trying to skip creation of the hint btree. The minimal fix is to change hint size for the cleaner policy to 4 bytes (only hint size supported). Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22dm: fix AB-BA deadlock in __dm_destroy()Junichi Nomura
commit 2a708cff93f1845b9239bc7d6310aef54e716c6a upstream. __dm_destroy() takes io_barrier SRCU lock (dm_get_live_table) and suspend_lock in reverse order. Doing so can cause AB-BA deadlock: __dm_destroy dm_swap_table --------------------------------------------------- mutex_lock(suspend_lock) dm_get_live_table() srcu_read_lock(io_barrier) dm_sync_table() synchronize_srcu(io_barrier) .. waiting for dm_put_live_table() mutex_lock(suspend_lock) .. waiting for suspend_lock Fix this by taking the locks in proper order. Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Fixes: ab7c7bb6f4ab ("dm: hold suspend_lock while suspending device during device deletion") Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22clk: samsung: fix cpu clock's flags checkingBartlomiej Zolnierkiewicz
commit 9e294bf88a583825a413df408b9fe9e658fb93ac upstream. CLK_CPU_HAS_DIV1 and CLK_CPU_NEEDS_DEBUG_ALT_DIV masks were incorrectly used as a bit numbers. Fix it. Tested on Exynos4210 based Origen board and on Exynos5250 based Arndale board. Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Thomas Abraham <thomas.ab@samsung.com> Fixes: ddeac8d96 ("clk: samsung: add infrastructure to register cpu clocks") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22clk: ti: clk-7xx: Remove hardwired ABE clock configurationPeter Ujfalusi
commit 4b3061b39132cba0c31b0eb767a9faeedf9437fc upstream. The ABE related clocks should be configured via DT and not have it wired inside of the kernel. Fixes: a74c52def9ab ("clk: ti: clk-7xx: Correct ABE DPLL configuration") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22clk: ti: fix dual-registration of uart4_ickBen Dooks
commit 19e79687de22f23bcfb5e79cce3daba20af228d1 upstream. On the OMAP AM3517 platform the uart4_ick gets registered twice, causing any power management to /dev/ttyO3 to fail when trying to wake the device up. This solves the following oops: [] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa09e008 [] PC is at serial_omap_pm+0x48/0x15c [] LR is at _raw_spin_unlock_irqrestore+0x30/0x5c Fixes: aafd900cab87 ("CLK: TI: add omap3 clock init file") Cc: mturquette@baylibre.com Cc: sboyd@codeaurora.org Cc: linux-clk@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-kernel@lists.codethink.co.uk Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22cpufreq: acpi_cpufreq: prevent crash on reading freqdomain_cpusSrinivas Pandruvada
commit e25303676e18a7947185a34e26dd08cf0c0ea573 upstream. When freqdomain_cpus attribute is read from an offlined cpu, it will cause crash. This change prevents calling cpufreq_show_cpus when policy driver_data is NULL. Crash info: [ 170.814949] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 170.814990] IP: [<ffffffff813b2490>] _find_next_bit.part.0+0x10/0x70 [ 170.815021] PGD 227d30067 PUD 229e56067 PMD 0 [ 170.815043] Oops: 0000 [#2] SMP [ 170.816022] CPU: 3 PID: 3121 Comm: cat Tainted: G D OE 4.3.0-rc3+ #33 ... ... [ 170.816657] Call Trace: [ 170.816672] [<ffffffff813b2505>] ? find_next_bit+0x15/0x20 [ 170.816696] [<ffffffff8160e47c>] cpufreq_show_cpus+0x5c/0xd0 [ 170.816722] [<ffffffffa031a409>] show_freqdomain_cpus+0x19/0x20 [acpi_cpufreq] [ 170.816749] [<ffffffff8160e65b>] show+0x3b/0x60 [ 170.816769] [<ffffffff8129b31c>] sysfs_kf_seq_show+0xbc/0x130 [ 170.816793] [<ffffffff81299be3>] kernfs_seq_show+0x23/0x30 [ 170.816816] [<ffffffff81240f2c>] seq_read+0xec/0x390 [ 170.816837] [<ffffffff8129a64a>] kernfs_fop_read+0x10a/0x160 [ 170.816861] [<ffffffff8121d9b7>] __vfs_read+0x37/0x100 [ 170.816883] [<ffffffff813217c0>] ? security_file_permission+0xa0/0xc0 [ 170.816909] [<ffffffff8121e2e3>] vfs_read+0x83/0x130 [ 170.816930] [<ffffffff8121f035>] SyS_read+0x55/0xc0 ... ... [ 170.817185] ---[ end trace bc6eadf82b2b965a ]--- Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22mmc: sdhci-pxav3: fix error handling of armada_38x_quirksMarcin Wojtas
commit 2162d9f41e7c4778b96b8e3b97adcedbadc861f1 upstream. In case of armada_38x_quirks error, all clocks should be cleaned-up, same as after mv_conf_mbus_windows failure. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22mmc: sdhci-pxav3: disable clock inversion for HS MMC cardsNadav Haklai
commit fa7964147da57b2d40c2db2b6ed98fb7dc934bff upstream. According to 'FE-2946959' erratum the clock inversion option is needed to support slow frequencies when the card input hold time requirement is high. This setting is not required for high speed MMC and might cause timing violation. Signed-off-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22mmc: sdhci-pxav3: remove broken clock base quirk for Armada 38x sdhci driverNadav Haklai
commit 5de76bfcb1e5ac66c57b99e8e193dacac7416f0e upstream. shci-pxav3 driver is enabling by default the SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN quirk. However this quirk is not required for Armada 38x and leads to wrong clock setting in the divider. Signed-off-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22md/bitmap: don't pass -1 to bitmap_storage_alloc.NeilBrown
commit da6fb7a9e5bd6f04f7e15070f630bdf1ea502841 upstream. Passing -1 to bitmap_storage_alloc() causes page->index to be set to -1, which is quite problematic. So only pass ->cluster_slot if mddev_is_clustered(). Fixes: b97e92574c0b ("Use separate bitmaps for each nodes in the cluster") Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22igb: do not re-init SR-IOV during probeStefan Assmann
commit 6423fc34160939142d72ffeaa2db6408317f54df upstream. During driver probing the following code path is triggered. igb_probe ->igb_sw_init ->igb_probe_vfs ->igb_pci_enable_sriov ->igb_sriov_reinit Doing the SR-IOV re-init is not necessary during probing since we're starting from scratch. Here we can call igb_enable_sriov() right away. Running igb_sriov_reinit() during igb_probe() also seems to cause occasional packet loss on some onboard 82576 NICs. Reproduced on Dell and HP servers with onboard 82576 NICs. Example: Intel Corporation 82576 Gigabit Network Connection [8086:10c9] (rev 01) Subsystem: Dell Device [1028:0481] Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Daniel J Blueman <daniel@numascale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22net/xen-netfront: only napi_synchronize() if runningChas Williams
commit 274b045509175db0405c784be85e8cce116e6f7d upstream. If an interface isn't running napi_synchronize() will hang forever. [ 392.248403] rmmod R running task 0 359 343 0x00000000 [ 392.257671] ffff88003760fc88 ffff880037193b40 ffff880037193160 ffff88003760fc88 [ 392.267644] ffff880037610000 ffff88003760fcd8 0000000100014c22 ffffffff81f75c40 [ 392.277524] 0000000000bc7010 ffff88003760fca8 ffffffff81796927 ffffffff81f75c40 [ 392.287323] Call Trace: [ 392.291599] [<ffffffff81796927>] schedule+0x37/0x90 [ 392.298553] [<ffffffff8179985b>] schedule_timeout+0x14b/0x280 [ 392.306421] [<ffffffff810f91b9>] ? irq_free_descs+0x69/0x80 [ 392.314006] [<ffffffff811084d0>] ? internal_add_timer+0xb0/0xb0 [ 392.322125] [<ffffffff81109d07>] msleep+0x37/0x50 [ 392.329037] [<ffffffffa00ec79a>] xennet_disconnect_backend.isra.24+0xda/0x390 [xen_netfront] [ 392.339658] [<ffffffffa00ecadc>] xennet_remove+0x2c/0x80 [xen_netfront] [ 392.348516] [<ffffffff81481c69>] xenbus_dev_remove+0x59/0xc0 [ 392.356257] [<ffffffff814e7217>] __device_release_driver+0x87/0x120 [ 392.364645] [<ffffffff814e7cf8>] driver_detach+0xb8/0xc0 [ 392.371989] [<ffffffff814e6e69>] bus_remove_driver+0x59/0xe0 [ 392.379883] [<ffffffff814e84f0>] driver_unregister+0x30/0x70 [ 392.387495] [<ffffffff814814b2>] xenbus_unregister_driver+0x12/0x20 [ 392.395908] [<ffffffffa00ed89b>] netif_exit+0x10/0x775 [xen_netfront] [ 392.404877] [<ffffffff81124e08>] SyS_delete_module+0x1d8/0x230 [ 392.412804] [<ffffffff8179a8ee>] system_call_fastpath+0x12/0x71 Signed-off-by: Chas Williams <3chas3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: "Kamata, Munehisa" <kamatam@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22xen/blkback: free requests on disconnectionRoger Pau Monne
commit f929d42ceb18a8acfd47e0e7b7d90b5d49bd9258 upstream. This is due to commit 86839c56dee28c315a4c19b7bfee450ccd84cd25 "xen/block: add multi-page ring support" When using an guest under UEFI - after the domain is destroyed the following warning comes from blkback. ------------[ cut here ]------------ WARNING: CPU: 2 PID: 95 at /home/julien/works/linux/drivers/block/xen-blkback/xenbus.c:274 xen_blkif_deferred_free+0x1f4/0x1f8() Modules linked in: CPU: 2 PID: 95 Comm: kworker/2:1 Tainted: G W 4.2.0 #85 Hardware name: APM X-Gene Mustang board (DT) Workqueue: events xen_blkif_deferred_free Call trace: [<ffff8000000890a8>] dump_backtrace+0x0/0x124 [<ffff8000000891dc>] show_stack+0x10/0x1c [<ffff8000007653bc>] dump_stack+0x78/0x98 [<ffff800000097e88>] warn_slowpath_common+0x9c/0xd4 [<ffff800000097f80>] warn_slowpath_null+0x14/0x20 [<ffff800000557a0c>] xen_blkif_deferred_free+0x1f0/0x1f8 [<ffff8000000ad020>] process_one_work+0x160/0x3b4 [<ffff8000000ad3b4>] worker_thread+0x140/0x494 [<ffff8000000b2e34>] kthread+0xd8/0xf0 ---[ end trace 6f859b7883c88cdd ]--- Request allocation has been moved to connect_ring, which is called every time blkback connects to the frontend (this can happen multiple times during a blkback instance life cycle). On the other hand, request freeing has not been moved, so it's only called when destroying the backend instance. Due to this mismatch, blkback can allocate the request pool multiple times, without freeing it. In order to fix it, move the freeing of requests to xen_blkif_disconnect to restore the symmetry between request allocation and freeing. Reported-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Tested-by: Julien Grall <julien.grall@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: xen-devel@lists.xenproject.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22arm64/efi: Fix boot crash by not padding between EFI_MEMORY_RUNTIME regionsArd Biesheuvel
commit 0ce3cc008ec04258b6a6314b09f1a6012810881a upstream. The new Properties Table feature introduced in UEFIv2.5 may split memory regions that cover PE/COFF memory images into separate code and data regions. Since these regions only differ in the type (runtime code vs runtime data) and the permission bits, but not in the memory type attributes (UC/WC/WT/WB), the spec does not require them to be aligned to 64 KB. Since the relative offset of PE/COFF .text and .data segments cannot be changed on the fly, this means that we can no longer pad out those regions to be mappable using 64 KB pages. Unfortunately, there is no annotation in the UEFI memory map that identifies data regions that were split off from a code region, so we must apply this logic to all adjacent runtime regions whose attributes only differ in the permission bits. So instead of rounding each memory region to 64 KB alignment at both ends, only round down regions that are not directly preceded by another runtime region with the same type attributes. Since the UEFI spec does not mandate that the memory map be sorted, this means we also need to sort it first. Note that this change will result in all EFI_MEMORY_RUNTIME regions whose start addresses are not aligned to the OS page size to be mapped with executable permissions (i.e., on kernels compiled with 64 KB pages). However, since these mappings are only active during the time that UEFI Runtime Services are being invoked, the window for abuse is rather small. Tested-by: Mark Salter <msalter@redhat.com> Tested-by: Mark Rutland <mark.rutland@arm.com> [UEFI 2.4 only] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Reviewed-by: Mark Salter <msalter@redhat.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1443218539-7610-3-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22mmc: core: fix dead loop of mmc_retuneChaotian Jing
commit 031277d4d33d33f0174fbb569ca8f68238175617 upstream. When get a CRC error, start the mmc_retune, it will issue CMD19/CMD21 to do tune, assume there were 10 clock phase need to try, phase 0 to phase 6 is ok, phase 7 to phase 9 is NG, we try it from 0 to 9, so the last CMD19/CMD21 will get CRC error, host->need_retune was set and cause mmc_retune was called, then dead loop of mmc_retune Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: bd11e8bd03ca ("mmc: core: Flag re-tuning is needed on CRC errors") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22mmc: core: Don't return an error for CD/WP GPIOs when GPIOLIB is unsetUlf Hansson
commit 43934ece2ea72c1dd279c0b0478c1a036d5d77ee upstream. When CONFIG_GPIOLIB is unset, its stubs will return -ENOSYS. That means when the mmc core parses DT for CD/WP GPIOs via mmc_of_parse(), -ENOSYS becomes propagated to the caller. Typically this means that the mmc host driver fails to probe. As the CD/WP GPIOs are already treated as optional, let's extend that to cover the case when CONFIG_GPIOLIB is unset. Reported-by: Michal Simek <michal.simek@xilinx.com> Fixes: 16b23787fc70 ("mmc: sdhci-of-arasan: Call OF parsing for MMC") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22iscsi-target: Avoid OFMarker + IFMarker negotiationNicholas Bellinger
commit 673681cafa99776e334c3e61cafa2cf115950c32 upstream. This patch fixes a v4.2+ regression introduced by commit c04a6091 that removed support for obsolete sync-and-steering markers usage as originally defined in RFC-3720. The regression would involve attempting to send OFMarker=No + IFMarker=No keys during opertional negotiation login phase, including when initiators did not actually propose these keys. The result for MSFT iSCSI initiators would be random junk in TCP stream after the last successful login request was been sent signaling the move to full feature phase (FFP) operation. To address this bug, go ahead and avoid negotiating these keys by default unless the initiator explicitly proposes them, but still respond to them with 'No' if they are proposed. Reported-by: Dragan Milivojević <galileo@pkm-inc.com> Bisected-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm> Tested-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selectedSudip Mukherjee
commit 21343ac21ec7d871e94e98e288f3398a4207d9c0 upstream. The builds of allmodconfig of avr32 is failing with: drivers/net/ethernet/via/via-rhine.c:1098:2: error: implicit declaration of function 'pci_iomap' [-Werror=implicit-function-declaration] drivers/net/ethernet/via/via-rhine.c:1119:2: error: implicit declaration of function 'pci_iounmap' [-Werror=implicit-function-declaration] The generic empty pci_iomap and pci_iounmap is used only if CONFIG_PCI is not defined and CONFIG_GENERIC_PCI_IOMAP is defined. Add GENERIC_PCI_IOMAP in the dependency list for VIA_RHINE as we are getting build failure when CONFIG_PCI and CONFIG_GENERIC_PCI_IOMAP both are not defined. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22UBI: return ENOSPC if no enough space availableshengyong
commit 7c7feb2ebfc9c0552c51f0c050db1d1a004faac5 upstream. UBI: attaching mtd1 to ubi0 UBI: scanning is finished UBI error: init_volumes: not enough PEBs, required 706, available 686 UBI error: ubi_wl_init: no enough physical eraseblocks (-20, need 1) UBI error: ubi_attach_mtd_dev: failed to attach mtd1, error -12 <= NOT ENOMEM UBI error: ubi_init: cannot attach mtd1 If available PEBs are not enough when initializing volumes, return -ENOSPC directly. If available PEBs are not enough when initializing WL, return -ENOSPC instead of -ENOMEM. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: David Gstir <david@sigma-star.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22UBI: Validate data_sizeRichard Weinberger
commit 281fda27673f833a01d516658a64d22a32c8e072 upstream. Make sure that data_size is less than LEB size. Otherwise a handcrafted UBI image is able to trigger an out of bounds memory access in ubi_compare_lebs(). Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: David Gstir <david@sigma-star.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22rsi: Fix possible leak when loading firmwareChristian Engelmayer
commit a8b9774571d46506a0774b1ced3493b1245cf893 upstream. Commit 5d5cd85ff441 ("rsi: Fix failure to load firmware after memory leak fix and fix the leak") also added a check on the allocation of DMA-accessible memory that may directly return. In that case the already allocated firmware data is leaked. Make sure the data is always freed correctly. Detected by Coverity CID 1316519. Fixes: 5d5cd85ff441 ("rsi: Fix failure to load firmware after memory leak fix and fix the leak") Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22cpufreq: dt: Tolerance applies on both sides of target voltageViresh Kumar
commit a2022001cebd0825b96aa0f3345ea3ad44ae79d4 upstream. Tolerance applies on both sides of the target voltage, i.e. both min and max sides. But while checking if a voltage is supported by the regulator or not, we haven't taken care of tolerance on the lower side. Fix that. Cc: Lucas Stach <l.stach@pengutronix.de> Fixes: 045ee45c4ff2 ("cpufreq: cpufreq-dt: disable unsupported OPPs") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22cpu/cacheinfo: Fix teardown pathBorislav Petkov
commit 2110d70c5e58326a10e93cfefdc0b3686e2ada12 upstream. Philip Müller reported a hang when booting 32-bit 4.1 kernel on an AMD box. A fragment of the splat was enough to pinpoint the issue: task: f58e0000 ti: f58e8000 task.ti: f58e800 EIP: 0060:[<c135a903>] EFLAGS: 00010206 CPU: 0 EIP is at free_cache_attributes+0x83/0xd0 EAX: 00000001 EBX: f589d46c ECX: 00000090 EDX: 360c2000 ESI: 00000000 EDI: c1724a80 EBP: f58e9ec0 ESP: f58e9ea0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 000000ac CR3: 01731000 CR4: 000006d0 cache_shared_cpu_map_setup() did check sibling CPUs cacheinfo descriptor while the respective teardown path cache_shared_cpu_map_remove() didn't. Fix that. >From tglx's version: to be on the safe side, move the cacheinfo descriptor check to free_cache_attributes(), thus cleaning up the hotplug path a little and making this even more robust. Reported-and-tested-by: Philip Müller <philm@manjaro.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-kernel@vger.kernel.org Cc: manjaro-dev@manjaro.org Cc: Philip Müller <philm@manjaro.org> Link: https://lkml.kernel.org/r/55B47BB8.6080202@manjaro.org Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22crypto: marvell - properly handle CRYPTO_TFM_REQ_MAY_BACKLOG-flagged requestsThomas Petazzoni
commit cfcd2271a9076a9891014bc8e18d4fd48acccffe upstream. The mv_cesa_queue_req() function calls crypto_enqueue_request() to enqueue a request. In the normal case (i.e the queue isn't full), this function returns -EINPROGRESS. The current Marvell CESA crypto driver takes this into account and cleans up the request only if an error occured, i.e if the return value is not -EINPROGRESS. Unfortunately this causes problems with CRYPTO_TFM_REQ_MAY_BACKLOG-flagged requests. When such a request is passed to crypto_enqueue_request() and the queue is full, crypto_enqueue_request() will return -EBUSY, but will keep the request enqueued nonetheless. This situation was not properly handled by the Marvell CESA driver, which was anyway cleaning up the request in such a situation. When later on the request was taken out of the backlog and actually processed, a kernel crash occured due to the internal driver data structures for this structure having been cleaned up. To avoid this situation, this commit adds a mv_cesa_req_needs_cleanup() helper function which indicates if the request needs to be cleaned up or not after a call to crypto_enqueue_request(). This helper allows to do the cleanup only in the appropriate cases, and all call sites of mv_cesa_queue_req() are fixed to use this new helper function. Reported-by: Vincent Donnefort <vdonnefort@gmail.com> Fixes: db509a45339fd ("crypto: marvell/cesa - add TDMA support") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22USB: Add reset-resume quirk for two Plantronics usb headphones.Yao-Wen Mao
commit 8484bf2981b3d006426ac052a3642c9ce1d8d980 upstream. These two headphones need a reset-resume quirk to properly resume to original volume level. Signed-off-by: Yao-Wen Mao <yaowen@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22usb: Add device quirk for Logitech PTZ camerasVincent Palatin
commit 72194739f54607bbf8cfded159627a2015381557 upstream. Add a device quirk for the Logitech PTZ Pro Camera and its sibling the ConferenceCam CC3000e Camera. This fixes the failed camera enumeration on some boot, particularly on machines with fast CPU. Tested by connecting a Logitech PTZ Pro Camera to a machine with a Haswell Core i7-4600U CPU @ 2.10GHz, and doing thousands of reboot cycles while recording the kernel logs and taking camera picture after each boot. Before the patch, more than 7% of the boots show some enumeration transfer failures and in a few of them, the kernel is giving up before actually enumerating the webcam. After the patch, the enumeration has been correct on every reboot. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22USB: chaoskey read offset bugAlexander Inyukhin
commit 1d5c47f555c5ae050fad22e4a99f88856cae5d05 upstream. Rng reads in chaoskey driver could return the same data under the certain conditions. Signed-off-by: Alexander Inyukhin <shurick@sectorb.msk.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22usb: musb: cppi41: allow it to work againFelipe Balbi
commit b0a688ddcc5015eb26000c63841db7c46cfb380a upstream. since commit 33c300cb90a6 ("usb: musb: dsps: don't fake of_node to musb core") we have been preventing CPPI 4.1 from probing due to NULL of_node. We can't revert said commit otherwise a different regression would show up, so the fix is to look for the parent device's (glue layer's) of_node instead, since that's the thing which is actually described in DTS. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22usb: phy: phy-generic: Fix reset behaviour on legacy bootRoger Quadros
commit 762982db33b23029e98c844611e2e8beeb75bc0d upstream. The gpio-desc migration done in v4.0 caused a regression with legacy boots due to reversed reset logic. e.g. omap3-beagle USB host breaks on legacy boot. Request the reset GPIO with GPIOF_ACTIVE_LOW flag so that it matches the driver logic and pin behaviour. Fixes: e9f2cefb0cdc ("usb: phy: generic: migrate to gpio_desc") Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22usb: Use the USB_SS_MULT() macro to get the burst multiplier.Mathias Nyman
commit ff30cbc8da425754e8ab96904db1d295bd034f27 upstream. Bits 1:0 of the bmAttributes are used for the burst multiplier. The rest of the bits used to be reserved (zero), but USB3.1 takes bit 7 into use. Use the existing USB_SS_MULT() macro instead to make sure the mult value and hence max packet calculations are correct for USB3.1 devices. Note that burst multiplier in bmAttributes is zero based and that the USB_SS_MULT() macro adds one. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22usb: chipidea: udc: using the correct stall implementationPeter Chen
commit 56ffa1d154c7e12af16273f0cdc42690dd05caf5 upstream. According to spec, there are functional and protocol stalls. For functional stall, it is for bulk and interrupt endpoints, below are cases for it: - Host sends SET_FEATURE request for Set-Halt, the udc driver needs to set stall, and return true unconditionally. - The gadget driver may call usb_ep_set_halt to stall certain endpoints, if there is a transfer in pending, the udc driver should not set stall, and return -EAGAIN accordingly. These two kinds of stall need to be cleared by host using CLEAR_FEATURE request (Clear-Halt). For protocol stall, it is for control endpoint, this stall will be set if the control request has failed. This stall will be cleared by next setup request (hardware will do it). It fixed usbtest (drivers/usb/misc/usbtest.c) Test 13 "set/clear halt" test failure, meanwhile, this change has been verified by USB2 CV Compliance Test and MSC Tests. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22usb: musb: dsps: fix polling in device-only modeBin Liu
commit b8239dcc03afbd0886c1d9b91ba8fee7c6c9a6cb upstream. Fix the regression caused by commit ad78c918602 ("usb: musb: dsps: just start polling already") which causes polling the ID pin status even in device-only mode. Fixes: ad78c918602c ("usb: musb: dsps: just start polling already") Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22regmap: debugfs: Don't bother actually printing when calculating max lengthMark Brown
commit 176fc2d5770a0990eebff903ba680d2edd32e718 upstream. The in kernel snprintf() will conveniently return the actual length of the printed string even if not given an output beffer at all so just do that rather than relying on the user to pass in a suitable buffer, ensuring that we don't need to worry if the buffer was truncated due to the size of the buffer passed in. Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22regmap: debugfs: Ensure we don't underflow when printing access masksMark Brown
commit b763ec17ac762470eec5be8ebcc43e4f8b2c2b82 upstream. If a read is attempted which is smaller than the line length then we may underflow the subtraction we're doing with the unsigned size_t type so move some of the calculation to be additions on the right hand side instead in order to avoid this. Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22ipr: Enable SIS pipe commands for SIS-32 devices.Gabriel Krisman Bertazi
commit e35d7f27fbd51a09a41a5439e39f22a3d102c00b upstream. Remove unnecessary check that disabled SIS pipe commands for SIS-32 devices. This change was sufficient to enable raw mode and send SIS pipe commands for a 57B3 device. Fixes: f8ee25d7d239 ("ipr: AF DASD raw mode implementation in ipr driver") Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22pcmcia: sa11x0: fix missing clk_put() in sa11x0 socket driversRussell King
commit 72010aca55264cfe6516a955066c846d3885b0c6 upstream. Fix the lack of clk_put() in sa11xx_base.c's error cleanup paths by converting the driver to the devm_* API. Fixes: 86d88bfca475 ("ARM: 8247/2: pcmcia: sa1100: make use of device clock") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22ath10k: wake up queue upon vif creationMichal Kazior
commit 6d2d51ecfff13f5f6ffc476dccf4d5b2668072eb upstream. Vif's vdev_id is used as queue number. However due to the tx pausing design in ath10k it was possible for a new interface to be created with its tx queue stopped (via ieee80211_stop_queues). This could in turn leave the interface inoperable until ath10k_mac_tx_unlock() was called. This problem only affected multi-vif scenarios when new interfaces were created some time later after other interfaces have been running for some time and had Tx queue full at some point prior. Possible manifestation of the bug was authentication timeout for a client vif. Fixes: 96d828d45e16 ("ath10k: rework tx queue locking") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22ath10k: wake up offchannel queue properlyMichal Kazior
commit 3a73d1a6f22bf13044056543ad43b2a304ee0022 upstream. Once HTT Tx queue got full offchannel queue was stopped and never woken up again. This broke, e.g. P2P. This could be reproduced after running a lot of traffic enough to saturate 100% of the driver Tx queue and then trying to send offchannel traffic. Fixes: 96d828d45e16 ("ath10k: rework tx queue locking") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22ath10k: fix peer limit enforcementMichal Kazior
commit e04cafbc38c70af2aad3810ce24ab0eba8114779 upstream. Firmware peer entries are involved in internal firmware vdev structures. This was not accounted for and could lead firmware to crash due to asking it to do more than it could. Fixes: 039a0051ec1a ("ath10k: allocate fw resources for iface combinations") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22ath10k: reject 11b tx fragmentation configurationMichal Kazior
commit 92092fe528e79c9bd25784ca0ef341d5a1d1b642 upstream. Even though there's a WMI enum for fragmentation threshold no known firmware actually implements it. Moreover it is not possible to rely frame fragmentation to mac80211 because firmware clears the "more fragments" bit in frame control making it impossible for remote devices to reassemble frames. Hence implement a dummy callback just to say fragmentation isn't supported. This effectively prevents mac80211 from doing frame fragmentation in software. This fixes Tx becoming broken after setting fragmentation threshold. Fixes: 1010ba4c5d1c ("ath10k: unregister and remove frag_threshold callback") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22ath10k: fix per-vif queue lockingMichal Kazior
commit acd0b27bb13a09dd0a56d4562d3eb4137a7318b2 upstream. Whenever any vdev was supposed to be paused all Tx queues were stopped (except offchannel) instead of only these associated with the given vdev. This caused subtle issues with multi-channel/multi-vif scenarios, e.g. authentication of station vif could sometimes fail depending on fw tx pause request timing. Fixes: b4aa539dd8f2 ("ath10k: implement tx pause wmi event") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22device property: fix potential NULL pointer dereferenceAndy Shevchenko
commit ecc87eed7beeb50c0be0b73322d62135277ea2b0 upstream. In device_add_property_set() we check pset parameter for a NULL, but few lines later we do a pointer arithmetic without check that will crash kernel in the set_secondary_fwnode(). Here we check if pset parameter is NULL and return immediately. Fixes: 16ba08d5c9ec (device property: Introduce firmware node type for platform data) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-07 07:46:51 +0000