Age | Commit message (Collapse) | Author |
|
This is the 3.14.24 stable release
Conflicts:
net/ipv4/ip_output.c
|
|
commit b47dcbdc5161d3d5756f430191e2840d9b855492 upstream.
If the TSC is unusable or disabled, then this patch fixes:
- Confusion while trying to clear old APIC interrupts.
- Division by zero and incorrect programming of the TSC deadline
timer.
This fixes boot if the CPU has a TSC deadline timer but a missing or
broken TSC. The failure to boot can be observed with qemu using
-cpu qemu64,-tsc,+tsc-deadline
This also happens to me in nested KVM for unknown reasons.
With this patch, I can boot cleanly (although without a TSC).
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Bandan Das <bsd@redhat.com>
Link: http://lkml.kernel.org/r/e2fa274e498c33988efac0ba8b7e3120f7f92d78.1413393027.git.luto@amacapital.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 849f5d894383d25c49132437aa289c9a9c98d5df upstream.
Add Braswell PCI ID to list of supported ID's for the IOSF driver.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: http://lkml.kernel.org/r/1411017231-20807-2-git-send-email-david.e.box@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aece118e487a744eafcdd0c77fe32b55ee2092a1 upstream.
Intel processors which don't report cache information via cpuid(2)
or cpuid(4) need quirk code in the legacy_cache_size callback to
report this data. For Intel that callback is is intel_size_cache().
This patch enables calling of cpu_detect_cache_sizes() inside of
init_intel() and hence the calling of the legacy_cache callback in
intel_size_cache(). Adding this call will ensure that PIII Tualatin
currently in intel_size_cache() and Quark SoC X1000 being added to
intel_size_cache() in this patch will report their respective cache
sizes.
This model of calling cpu_detect_cache_sizes() is consistent with
AMD/Via/Cirix/Transmeta and Centaur.
Also added is a string to idenitfy the Quark as Quark SoC X1000
giving better and more descriptive output via /proc/cpuinfo
Adding cpu_detect_cache_sizes to init_intel() will enable calling
of intel_size_cache() on Intel processors which currently no code
can reach. Therefore this patch will also re-enable reporting
of PIII Tualatin cache size information as well as add
Quark SoC X1000 support.
Comment text and cache flow logic suggested by Thomas Gleixner
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: davej@redhat.com
Cc: hmh@hmh.eng.br
Link: http://lkml.kernel.org/r/1412641189-12415-3-git-send-email-pure.logic@nexus-software.ie
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 04725ad59474d24553d526fa774179ecd2922342 upstream.
Introduce PCI IDs macro for the list of supported product:
BayTrail & Quark X1000.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Link: http://lkml.kernel.org/r/1399668248-24199-5-git-send-email-david.e.box@linux.intel.com
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 90916e048c1e0c1d379577e43ab9b8e331490cfb upstream.
Add PCI device ID, i.e. that of the Host Bridge,
for IOSF MBI driver.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Link: http://lkml.kernel.org/r/1399668248-24199-4-git-send-email-david.e.box@linux.intel.com
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ef1def800e907edd28ddb1a5c64bae6b8749cdd upstream.
Added all the MBI units below and their associated read/write
opcodes:
- Host Bridge Arbiter
- Host Bridge
- Remote Management Unit
- Memory Manager & eSRAM
- SoC Unit
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Link: http://lkml.kernel.org/r/1399668248-24199-3-git-send-email-david.e.box@linux.intel.com
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b8f0c8780c71d78624f736d7849645b64cc88b7 upstream.
Currently drivers that run on non-IOSF systems (Core/Xeon) can't use the IOSF
driver on SOC's without selecting it which forces an unnecessary and limiting
dependency. Provides dummy functions to allow these modules to conditionally
use the driver on IOSF equipped platforms without impacting their ability to
compile and load on non-IOSF platforms. Build default m to ensure availability
on x86 SOC's.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: http://lkml.kernel.org/r/1399668248-24199-2-git-send-email-david.e.box@linux.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a642fc305053cc1c6e47e4f4df327895747ab485 upstream.
On systems with invvpid instruction support (corresponding bit in
IA32_VMX_EPT_VPID_CAP MSR is set) guest invocation of invvpid
causes vm exit, which is currently not handled and results in
propagation of unknown exit to userspace.
Fix this by installing an invvpid vm exit handler.
This is CVE-2014-3646.
Signed-off-by: Petr Matousek <pmatouse@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 234f3ce485d54017f15cf5e0699cff4100121601 upstream.
Before changing rip (during jmp, call, ret, etc.) the target should be asserted
to be canonical one, as real CPUs do. During sysret, both target rsp and rip
should be canonical. If any of these values is noncanonical, a #GP exception
should occur. The exception to this rule are syscall and sysenter instructions
in which the assigned rip is checked during the assignment to the relevant
MSRs.
This patch fixes the emulator to behave as real CPUs do for near branches.
Far branches are handled by the next patch.
This fixes CVE-2014-3647.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 05c83ec9b73c8124555b706f6af777b10adf0862 upstream.
Relative jumps and calls do the masking according to the operand size, and not
according to the address size as the KVM emulator does today.
This patch fixes KVM behavior.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2bc19dc3754fc066c43799659f0d848631c44cfe upstream.
KVM_EXIT_UNKNOWN is a kvm bug, we don't really know whether it was
triggered by a priveledged application. Let's not kill the guest: WARN
and inject #UD instead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 854e8bb1aa06c578c2c9145fa6bfe3680ef63b23 upstream.
Upon WRMSR, the CPU should inject #GP if a non-canonical value (address) is
written to certain MSRs. The behavior is "almost" identical for AMD and Intel
(ignoring MSRs that are not implemented in either architecture since they would
anyhow #GP). However, IA32_SYSENTER_ESP and IA32_SYSENTER_EIP cause #GP if
non-canonical address is written on Intel but not on AMD (which ignores the top
32-bits).
Accordingly, this patch injects a #GP on the MSRs which behave identically on
Intel and AMD. To eliminate the differences between the architecutres, the
value which is written to IA32_SYSENTER_ESP and IA32_SYSENTER_EIP is turned to
canonical value before writing instead of injecting a #GP.
Some references from Intel and AMD manuals:
According to Intel SDM description of WRMSR instruction #GP is expected on
WRMSR "If the source register contains a non-canonical address and ECX
specifies one of the following MSRs: IA32_DS_AREA, IA32_FS_BASE, IA32_GS_BASE,
IA32_KERNEL_GS_BASE, IA32_LSTAR, IA32_SYSENTER_EIP, IA32_SYSENTER_ESP."
According to AMD manual instruction manual:
LSTAR/CSTAR (SYSCALL): "The WRMSR instruction loads the target RIP into the
LSTAR and CSTAR registers. If an RIP written by WRMSR is not in canonical
form, a general-protection exception (#GP) occurs."
IA32_GS_BASE and IA32_FS_BASE (WRFSBASE/WRGSBASE): "The address written to the
base field must be in canonical form or a #GP fault will occur."
IA32_KERNEL_GS_BASE (SWAPGS): "The address stored in the KernelGSbase MSR must
be in canonical form."
This patch fixes CVE-2014-3610.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2febc839133280d5a5e8e1179c94ea674489dae2 upstream.
There's a race condition in the PIT emulation code in KVM. In
__kvm_migrate_pit_timer the pit_timer object is accessed without
synchronization. If the race condition occurs at the wrong time this
can crash the host kernel.
This fixes CVE-2014-3611.
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8b3c3104c3f4f706e99365c3e0d2aa61b95f969f upstream.
The previous patch blocked invalid writes directly when the MSR
is written. As a precaution, prevent future similar mistakes by
gracefulling handle GPs caused by writes to shared MSRs.
Signed-off-by: Andrew Honig <ahonig@google.com>
[Remove parts obsoleted by Nadav's patch. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d1cd1210834649ce1ca6bafe5ac25d2f40331343 upstream.
pte_pfn() returns a PFN of long (32 bits in 32-PAE), so "long <<
PAGE_SHIFT" will overflow for PFNs above 4GB.
Due to this issue, some Linux 32-PAE distros, running as guests on Hyper-V,
with 5GB memory assigned, can't load the netvsc driver successfully and
hence the synthetic network device can't work (we can use the kernel parameter
mem=3000M to work around the issue).
Cast pte_pfn() to phys_addr_t before shifting.
Fixes: "commit d76565344512: x86, mm: Create slow_virt_to_phys()"
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: gregkh@linuxfoundation.org
Cc: linux-mm@kvack.org
Cc: olaf@aepfle.de
Cc: apw@canonical.com
Cc: jasowang@redhat.com
Cc: dave.hansen@intel.com
Cc: riel@redhat.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1414580017-27444-1-git-send-email-decui@microsoft.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 653bc77af60911ead1f423e588f54fc2547c4957 upstream.
Rusty noticed a Really Bad Bug (tm) in my NT fix. The entry code
reads out of bounds, causing the NT fix to be unreliable. But, and
this is much, much worse, if your stack is somehow just below the
top of the direct map (or a hole), you read out of bounds and crash.
Excerpt from the crash:
[ 1.129513] RSP: 0018:ffff88001da4bf88 EFLAGS: 00010296
2b:* f7 84 24 90 00 00 00 testl $0x4000,0x90(%rsp)
That read is deterministically above the top of the stack. I
thought I even single-stepped through this code when I wrote it to
check the offset, but I clearly screwed it up.
Fixes: 8c7aa698baca ("x86_64, entry: Filter RFLAGS.NT on entry from userspace")
Reported-by: Rusty Russell <rusty@ozlabs.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8c7aa698baca5e8f1ba9edb68081f1e7a1abf455 upstream.
The NT flag doesn't do anything in long mode other than causing IRET
to #GP. Oddly, CPL3 code can still set NT using popf.
Entry via hardware or software interrupt clears NT automatically, so
the only relevant entries are fast syscalls.
If user code causes kernel code to run with NT set, then there's at
least some (small) chance that it could cause trouble. For example,
user code could cause a call to EFI code with NT set, and who knows
what would happen? Apparently some games on Wine sometimes do
this (!), and, if an IRET return happens, they will segfault. That
segfault cannot be handled, because signal delivery fails, too.
This patch programs the CPU to clear NT on entry via SYSCALL (both
32-bit and 64-bit, by my reading of the AMD APM), and it clears NT
in software on entry via SYSENTER.
To save a few cycles, this borrows a trick from Jan Beulich in Xen:
it checks whether NT is set before trying to clear it. As a result,
it seems to have very little effect on SYSENTER performance on my
machine.
There's another minor bug fix in here: it looks like the CFI
annotations were wrong if CONFIG_AUDITSYSCALL=n.
Testers beware: on Xen, SYSENTER with NT set turns into a GPF.
I haven't touched anything on 32-bit kernels.
The syscall mask change comes from a variant of this patch by Anish
Bhatt.
Note to stable maintainers: there is no known security issue here.
A misguided program can set NT and cause the kernel to try and fail
to deliver SIGSEGV, crashing the program. This patch fixes Far Cry
on Wine: https://bugs.winehq.org/show_bug.cgi?id=33275
Reported-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/395749a5d39a29bd3e4b35899cf3a3c1340e5595.1412189265.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 66463db4fc5605d51c7bb81d009d5bf30a783a2c upstream.
save_xstate_sig()->drop_init_fpu() doesn't look right. setup_rt_frame()
can fail after that, in this case the next setup_rt_frame() triggered
by SIGSEGV won't save fpu simply because the old state was lost. This
obviously mean that fpu won't be restored after sys_rt_sigreturn() from
SIGSEGV handler.
Shift drop_init_fpu() into !failed branch in handle_signal().
Test-case (needs -O2):
#include <stdio.h>
#include <signal.h>
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/mman.h>
#include <pthread.h>
#include <assert.h>
volatile double D;
void test(double d)
{
int pid = getpid();
for (D = d; D == d; ) {
/* sys_tkill(pid, SIGHUP); asm to avoid save/reload
* fp regs around "C" call */
asm ("" : : "a"(200), "D"(pid), "S"(1));
asm ("syscall" : : : "ax");
}
printf("ERR!!\n");
}
void sigh(int sig)
{
}
char altstack[4096 * 10] __attribute__((aligned(4096)));
void *tfunc(void *arg)
{
for (;;) {
mprotect(altstack, sizeof(altstack), PROT_READ);
mprotect(altstack, sizeof(altstack), PROT_READ|PROT_WRITE);
}
}
int main(void)
{
stack_t st = {
.ss_sp = altstack,
.ss_size = sizeof(altstack),
.ss_flags = SS_ONSTACK,
};
struct sigaction sa = {
.sa_handler = sigh,
};
pthread_t pt;
sigaction(SIGSEGV, &sa, NULL);
sigaltstack(&st, NULL);
sa.sa_flags = SA_ONSTACK;
sigaction(SIGHUP, &sa, NULL);
pthread_create(&pt, NULL, tfunc, NULL);
test(123.456);
return 0;
}
Reported-by: Bean Anderson <bean@azulsystems.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20140902175713.GA21646@redhat.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit df24fb859a4e200d9324e2974229fbb7adf00aef upstream.
Add preempt_disable() + preempt_enable() around math_state_restore() in
__restore_xstate_sig(). Otherwise __switch_to() after __thread_fpu_begin()
can overwrite fpu->state we are going to restore.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20140902175717.GA21649@redhat.com
Reviewed-by: Suresh Siddha <sbsiddha@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0e6d3112a4e95d55cf6dca88f298d5f4b8f29bd1 upstream.
It is currently possible to execve() an x32 executable on an x86_64
kernel that has only ia32 compat enabled. However all its syscalls
will fail, even _exit(). This usually causes it to segfault.
Change the ELF compat architecture check so that x32 executables are
rejected if we don't support the x32 ABI.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Link: http://lkml.kernel.org/r/1410120305.6822.9.camel@decadent.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is the 3.14.23 stable release
|
|
This is the 3.14.20 stable release
|
|
This is the 3.14.18 stable release
|
|
This is the 3.14.16 stable release
|
|
This is the 3.14.15 stable release
|
|
This is the 3.14.14 stable release
Conflicts:
kernel/Kconfig.locks
kernel/trace/trace.c
|
|
This is the 3.14.13 stable release
|
|
it still explodes
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
It has become an obsession to mitigate the determinism vs. throughput
loss of RT. Looking at the mainline semantics of preemption points
gives a hint why RT sucks throughput wise for ordinary SCHED_OTHER
tasks. One major issue is the wakeup of tasks which are right away
preempting the waking task while the waking task holds a lock on which
the woken task will block right after having preempted the wakee. In
mainline this is prevented due to the implicit preemption disable of
spin/rw_lock held regions. On RT this is not possible due to the fully
preemptible nature of sleeping spinlocks.
Though for a SCHED_OTHER task preempting another SCHED_OTHER task this
is really not a correctness issue. RT folks are concerned about
SCHED_FIFO/RR tasks preemption and not about the purely fairness
driven SCHED_OTHER preemption latencies.
So I introduced a lazy preemption mechanism which only applies to
SCHED_OTHER tasks preempting another SCHED_OTHER task. Aside of the
existing preempt_count each tasks sports now a preempt_lazy_count
which is manipulated on lock acquiry and release. This is slightly
incorrect as for lazyness reasons I coupled this on
migrate_disable/enable so some other mechanisms get the same treatment
(e.g. get_cpu_light).
Now on the scheduler side instead of setting NEED_RESCHED this sets
NEED_RESCHED_LAZY in case of a SCHED_OTHER/SCHED_OTHER preemption and
therefor allows to exit the waking task the lock held region before
the woken task preempts. That also works better for cross CPU wakeups
as the other side can stay in the adaptive spinning loop.
For RT class preemption there is no change. This simply sets
NEED_RESCHED and forgoes the lazy preemption counter.
Initial test do not expose any observable latency increasement, but
history shows that I've been proven wrong before :)
The lazy preemption mode is per default on, but with
CONFIG_SCHED_DEBUG enabled it can be disabled via:
# echo NO_PREEMPT_LAZY >/sys/kernel/debug/sched_features
and reenabled via
# echo PREEMPT_LAZY >/sys/kernel/debug/sched_features
The test results so far are very machine and workload dependent, but
there is a clear trend that it enhances the non RT workload
performance.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
We can't deal with the cpumask allocations which happen in atomic
context (see arch/x86/kernel/apic/io_apic.c) on RT right now.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Don Estabrook reported
| kernel: WARNING: CPU: 2 PID: 858 at kernel/sched/core.c:2428 migrate_disable+0xed/0x100()
| kernel: WARNING: CPU: 2 PID: 858 at kernel/sched/core.c:2462 migrate_enable+0x17b/0x200()
| kernel: WARNING: CPU: 3 PID: 865 at kernel/sched/core.c:2428 migrate_disable+0xed/0x100()
and his backtrace showed some crypto functions which looked fine.
The problem is the following sequence:
glue_xts_crypt_128bit()
{
blkcipher_walk_virt(); /* normal migrate_disable() */
glue_fpu_begin(); /* get atomic */
while (nbytes) {
__glue_xts_crypt_128bit();
blkcipher_walk_done(); /* with nbytes = 0, migrate_enable()
* while we are atomic */
};
glue_fpu_end() /* no longer atomic */
}
and this is why the counter get out of sync and the warning is printed.
The other problem is that we are non-preemptible between
glue_fpu_begin() and glue_fpu_end() and the latency grows. To fix this,
I shorten the FPU off region and ensure blkcipher_walk_done() is called
with preemption enabled. This might hurt the performance because we now
enable/disable the FPU state more often but we gain lower latency and
the bug is gone.
Cc: stable-rt@vger.kernel.org
Reported-by: Don Estabrook <don.estabrook@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
Restrict the preempt disabled regions to the actual floating point
operations and enable preemption for the administrative actions.
This is necessary on RT to avoid that kfree and other operations are
called with preemption disabled.
Reported-and-tested-by: Carsten Emde <cbe@osadl.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable-rt@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This is a copy from kmap_atomic_prot().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
In fact, with migrate_disable() existing one could play games with
kmap_atomic. You could save/restore the kmap_atomic slots on context
switch (if there are any in use of course), this should be esp easy now
that we have a kmap_atomic stack.
Something like the below.. it wants replacing all the preempt_disable()
stuff with pagefault_disable() && migrate_disable() of course, but then
you can flip kmaps around like below.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
[dvhart@linux.intel.com: build fix]
Link: http://lkml.kernel.org/r/1311842631.5890.208.camel@twins
[tglx@linutronix.de: Get rid of the per cpu variable and store the idx
and the pte content right away in the task struct.
Shortens the context switch code. ]
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
where do I start. Let me explain what is going on here. The code
sequence
| pushf
| pop %edx
| or $0x1,%dh
| push %edx
| mov $0xe0,%eax
| popf
| sysenter
triggers the bug. On 64bit kernel we see the double fault (with 32bit and
64bit userland) and on 32bit kernel there is no problem. The reporter said
that double fault does not happen on 64bit kernel with 64bit userland and
this is because in that case the VDSO uses the "syscall" interface instead
of "sysenter".
The bug. "popf" loads the flags with the TF bit set which enables
"single stepping" and this leads to a debug exception. Usually on 64bit
we have a special IST stack for the debug exception. Due to patch [0] we
do not use the IST stack but the kernel stack instead. On 64bit the
sysenter instruction starts in kernel with the stack address NULL. The
code sequence above enters the debug exception (TF flag) after the
sysenter instruction was executed which sets the stack pointer to NULL
and we have a fault (it seems that the debug exception saves some bytes
on the stack).
To fix the double fault I'm going to drop patch [0]. It is completely
pointless. In do_debug() and do_stack_segment() we disable preemption
which means the task can't leave the CPU. So it does not matter if we run
on IST or on kernel stack.
There is a patch [1] which drops preempt_disable() call for a 32bit
kernel but not for 64bit so there should be no regression.
And [1] seems valid even for this code sequence. We enter the debug
exception with a 256bytes long per cpu stack and migrate to the kernel
stack before calling do_debug().
[0] x86-disable-debug-stack.patch
[1] fix-rt-int3-x86_32-3.2-rt.patch
Cc: stable-rt@vger.kernel.org
Reported-by: Brian Silverman <bsilver16384@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
Normally the x86-64 trap handlers for debug/int 3/stack fault run
on a special interrupt stack to make them more robust
when dealing with kernel code.
The PREEMPT_RT kernel can sleep in locks even while allocating
GFP_ATOMIC memory. When one of these trap handlers needs to send
real time signals for ptrace it allocates memory and could then
try to to schedule. But it is not allowed to schedule on a
IST stack. This can cause warnings and hangs.
This patch disables the IST stacks for these handlers for PREEMPT_RT
kernel. Instead let them run on the normal process stack.
The kernel only really needs the ISTs here to make kernel debuggers more
robust in case someone sets a break point somewhere where the stack is
invalid. But there are no kernel debuggers in the standard kernel
that do this.
It also means kprobes cannot be set in situations with invalid stack;
but that sounds like a reasonable restriction.
The stack fault change could minimally impact oops quality, but not very
much because stack faults are fairly rare.
A better solution would be to use similar logic as the NMI "paranoid"
path: check if signal is for user space, if yes go back to entry.S, switch stack,
call sync_regs, then do the signal sending etc.
But this patch is much simpler and should work too with minimal impact.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Simplifies the separation of anon_rw_semaphores and rw_semaphores for
-rt.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
CPU bringup calls into the random pool to initialize the stack
canary. During boot that works nicely even on RT as the might sleep
checks are disabled. During CPU hotplug the might sleep checks
trigger. Making the locks in random raw is a major PITA, so avoid the
call on RT is the only sensible solution. This is basically the same
randomness which we get during boot where the random pool has no
entropy and we rely on the TSC randomnness.
Reported-by: Carsten Emde <carsten.emde@osadl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
We had a customer report a lockup on a 3.0-rt kernel that had the
following backtrace:
[ffff88107fca3e80] rt_spin_lock_slowlock at ffffffff81499113
[ffff88107fca3f40] rt_spin_lock at ffffffff81499a56
[ffff88107fca3f50] __wake_up at ffffffff81043379
[ffff88107fca3f80] mce_notify_irq at ffffffff81017328
[ffff88107fca3f90] intel_threshold_interrupt at ffffffff81019508
[ffff88107fca3fa0] smp_threshold_interrupt at ffffffff81019fc1
[ffff88107fca3fb0] threshold_interrupt at ffffffff814a1853
It actually bugged because the lock was taken by the same owner that
already had that lock. What happened was the thread that was setting
itself on a wait queue had the lock when an MCE triggered. The MCE
interrupt does a wake up on its wait list and grabs the same lock.
NOTE: THIS IS NOT A BUG ON MAINLINE
Sorry for yelling, but as I Cc'd mainline maintainers I want them to
know that this is an PREEMPT_RT bug only. I only Cc'd them for advice.
On PREEMPT_RT the wait queue locks are converted from normal
"spin_locks" into an rt_mutex (see the rt_spin_lock_slowlock above).
These are not to be taken by hard interrupt context. This usually isn't
a problem as most all interrupts in PREEMPT_RT are converted into
schedulable threads. Unfortunately that's not the case with the MCE irq.
As wait queue locks are notorious for long hold times, we can not
convert them to raw_spin_locks without causing issues with -rt. But
Thomas has created a "simple-wait" structure that uses raw spin locks
which may have been a good fit.
Unfortunately, wait queues are not the only issue, as the mce_notify_irq
also does a schedule_work(), which grabs the workqueue spin locks that
have the exact same issue.
Thus, this patch I'm proposing is to move the actual work of the MCE
interrupt into a helper thread that gets woken up on the MCE interrupt
and does the work in a schedulable context.
NOTE: THIS PATCH ONLY CHANGES THE BEHAVIOR WHEN PREEMPT_RT IS SET
Oops, sorry for yelling again, but I want to stress that I keep the same
behavior of mainline when PREEMPT_RT is not set. Thus, this only changes
the MCE behavior when PREEMPT_RT is configured.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[bigeasy@linutronix: make mce_notify_work() a proper prototype, use
kthread_run()]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
mce_timer is started in atomic contexts of cpu bringup. This results
in might_sleep() warnings on RT. Convert mce_timer to a hrtimer to
avoid this.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
fold in:
|From: Mike Galbraith <bitbucket@online.de>
|Date: Wed, 29 May 2013 13:52:13 +0200
|Subject: [PATCH] x86/mce: fix mce timer interval
|
|Seems mce timer fire at the wrong frequency in -rt kernels since roughly
|forever due to 32 bit overflow. 3.8-rt is also missing a multiplier.
|
|Add missing us -> ns conversion and 32 bit overflow prevention.
|
|Signed-off-by: Mike Galbraith <bitbucket@online.de>
|[bigeasy: use ULL instead of u64 cast]
|Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Preemption must be disabled before enabling interrupts in do_trap
on x86_64 because the stack in use for int3 and debug is a per CPU
stack set by th IST. But 32bit does not have an IST and the stack
still belongs to the current task and there is no problem in scheduling
out the task.
Keep preemption enabled on X86_32 when enabling interrupts for
do_trap().
The name of the function is changed from preempt_conditional_sti/cli()
to conditional_sti/cli_ist(), to annotate that this function is used
when the stack is on the IST.
Cc: stable-rt@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
With threaded interrupts we might see an interrupt in progress on
migration. Do not unmask it when this is the case.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Wrap the test for pagefault_disabled() into a helper, this allows us
to remove the need for current->pagefault_disabled on !-rt kernels.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-3yy517m8zsi9fpsf14xfaqkw@git.kernel.org
|
|
Necessary for decoupling pagefault disable from preempt count.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
On x86_64 we must disable preemption before we enable interrupts
for stack faults, int3 and debugging, because the current task is using
a per CPU debug stack defined by the IST. If we schedule out, another task
can come in and use the same stack and cause the stack to be corrupted
and crash the kernel on return.
When CONFIG_PREEMPT_RT_FULL is enabled, spin_locks become mutexes, and
one of these is the spin lock used in signal handling.
Some of the debug code (int3) causes do_trap() to send a signal.
This function calls a spin lock that has been converted to a mutex
and has the possibility to sleep. If this happens, the above issues with
the corrupted stack is possible.
Instead of calling the signal right away, for PREEMPT_RT and x86_64,
the signal information is stored on the stacks task_struct and
TIF_NOTIFY_RESUME is set. Then on exit of the trap, the signal resume
code will send the signal when preemption is enabled.
[ rostedt: Switched from #ifdef CONFIG_PREEMPT_RT_FULL to
ARCH_RT_DELAYS_SIGNAL_SEND and added comments to the code. ]
Cc: stable-rt@vger.kernel.org
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|