aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-19Linux 3.4.34-rt48v3.4.34-rt48Steven Rostedt (Red Hat)
2013-03-19Merge tag 'v3.4.34' into v3.4-rtSteven Rostedt (Red Hat)
This is the 3.4.34 stable release Conflicts: kernel/hrtimer.c Solved with: diff --cc kernel/hrtimer.c index 9114899,cdd5607..0000000 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@@ -1054,19 -982,20 +1032,39 @@@ int __hrtimer_start_range_ns(struct hrt * * XXX send_remote_softirq() ? */ - if (leftmost && new_base->cpu_base == &__get_cpu_var(hrtimer_bases)) { - ret = hrtimer_enqueue_reprogram(timer, new_base, wakeup); - if (ret) { + if (leftmost && new_base->cpu_base == &__get_cpu_var(hrtimer_bases) + && hrtimer_enqueue_reprogram(timer, new_base)) { - if (wakeup) { ++ ++ if (wakeup ++#ifdef CONFIG_PREEMPT_RT_BASE ++ /* ++ * Move softirq based timers away from the rbtree in ++ * case it expired already. Otherwise we would have a ++ * stale base->first entry until the softirq runs. ++ */ ++ && hrtimer_rt_defer(timer) ++#endif ++ ) { /* - * In case we failed to reprogram the timer (mostly - * because out current timer is already elapsed), - * remove it again and report a failure. This avoids - * stale base->first entries. + * We need to drop cpu_base->lock to avoid a + * lock ordering issue vs. rq->lock. */ - debug_deactivate(timer); - __remove_hrtimer(timer, new_base, - timer->state & HRTIMER_STATE_CALLBACK, 0); + raw_spin_unlock(&new_base->cpu_base->lock); + raise_softirq_irqoff(HRTIMER_SOFTIRQ); + local_irq_restore(flags); + return ret; - } else { - __raise_softirq_irqoff(HRTIMER_SOFTIRQ); } ++ ++ /* ++ * In case we failed to reprogram the timer (mostly ++ * because out current timer is already elapsed), ++ * remove it again and report a failure. This avoids ++ * stale base->first entries. ++ */ ++ debug_deactivate(timer); ++ __remove_hrtimer(timer, new_base, ++ timer->state & HRTIMER_STATE_CALLBACK, 0); ++ ret = -ETIME; } unlock_hrtimer_base(timer, &flags); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-28Linux 3.4.34v3.4.34Greg Kroah-Hartman
2013-02-28USB: usb-storage: unusual_devs update for Super TOP SATA bridgeJosh Boyer
commit 18e03310b5caa6d11c1a8c61b982c37047693fba upstream. The current entry in unusual_cypress.h for the Super TOP SATA bridge devices seems to be causing corruption on newer revisions of this device. This has been reported in Arch Linux and Fedora. The original patch was tested on devices with bcdDevice of 1.60, whereas the newer devices report bcdDevice as 2.20. Limit the UNUSUAL_DEV entry to devices less than 2.20. This fixes https://bugzilla.redhat.com/show_bug.cgi?id=909591 The Arch Forum post on this is here: https://bbs.archlinux.org/viewtopic.php?id=152011 Reported-by: Carsten S. <carsteniq@yahoo.com> Tested-by: Carsten S. <carsteniq@yahoo.com> Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28USB: storage: properly handle the endian issues of idProductfangxiaozhi
commit cd060956c5e97931c3909e4a808508469c0bb9f6 upstream. 1. The idProduct is little endian, so make sure its value to be compatible with the current CPU. Make no break on big endian processors. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28USB: ehci-omap: Fix autoloading of moduleRoger Quadros
commit 04753523266629b1cd0518091da1658755787198 upstream. The module alias should be "ehci-omap" and not "omap-ehci" to match the platform device name. The omap-ehci module should now autoload correctly. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28USB: option: add Huawei "ACM" devices using protocol = vendorBjørn Mork
commit 1f3f687722fd9b29a0c2a85b4844e3b2a3585c63 upstream. The USB device descriptor of one identity presented by a few Huawei morphing devices have serial functions with class codes 02/02/ff, indicating CDC ACM with a vendor specific protocol. This combination is often used for MSFT RNDIS functions, and the CDC ACM class driver will therefore ignore such functions. The CDC ACM class driver cannot support functions with only 2 endpoints. The underlying serial functions of these modems are also believed to be the same as for alternate device identities already supported by the option driver. Letting the same driver handle these functions independently of the current identity ensures consistent handling and user experience. There is no need to blacklist these devices in the rndis_host driver. Huawei serial functions will either have only 2 endpoints or a CDC ACM functional descriptor with bmCapabilities != 0, making them correctly ignored as "non RNDIS" by that driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28USB: option: add Yota / Megafon M100-1 4g modemBjørn Mork
commit cd565279e51bedee1b2988e84f9b3bef485adeb6 upstream. Interface layout: 00 CD-ROM 01 debug COM port 02 AP control port 03 modem 04 usb-ethernet Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0408 ProdID=ea42 Rev= 0.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM S: SerialNumber=353568051xxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28USB: option: add and update Alcatel modemsBjørn Mork
commit f8f0302bbcbd1b14655bef29f6996a2152be559d upstream. Adding three currently unsupported modems based on information from .inf driver files: Diag VID_1BBB&PID_0052&MI_00 AGPS VID_1BBB&PID_0052&MI_01 VOICE VID_1BBB&PID_0052&MI_02 AT VID_1BBB&PID_0052&MI_03 Modem VID_1BBB&PID_0052&MI_05 wwan VID_1BBB&PID_0052&MI_06 Diag VID_1BBB&PID_00B6&MI_00 AT VID_1BBB&PID_00B6&MI_01 Modem VID_1BBB&PID_00B6&MI_02 wwan VID_1BBB&PID_00B6&MI_03 Diag VID_1BBB&PID_00B7&MI_00 AGPS VID_1BBB&PID_00B7&MI_01 VOICE VID_1BBB&PID_00B7&MI_02 AT VID_1BBB&PID_00B7&MI_03 Modem VID_1BBB&PID_00B7&MI_04 wwan VID_1BBB&PID_00B7&MI_05 Updating the blacklist info for the X060S_X200 and X220_X500D, reserving interfaces for a wwan driver, based on wwan VID_1BBB&PID_0000&MI_04 wwan VID_1BBB&PID_0017&MI_06 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28dca: check against empty dca_domains list before unregister providerMaciej Sosnowski
commit c419fcfd071cf34ba00f9f65282583772d2655e7 upstream. When providers get blocked unregister_dca_providers() is called ending up with dca_providers and dca_domain lists emptied. Dca should be prevented from trying to unregister any provider if dca_domain list is found empty. Reported-by: Jiang Liu <jiang.liu@huawei.com> Tested-by: Gaohuai Han <hangaohuai@huawei.com> Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <djbw@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28vlan: adjust vlan_set_encap_proto() for its callersCong Wang
[ Upstream commit da8c87241c26aac81a64c7e4d21d438a33018f4e ] There are two places to call vlan_set_encap_proto(): vlan_untag() and __pop_vlan_tci(). vlan_untag() assumes skb->data points after mac addr, otherwise the following code vhdr = (struct vlan_hdr *) skb->data; vlan_tci = ntohs(vhdr->h_vlan_TCI); __vlan_hwaccel_put_tag(skb, vlan_tci); skb_pull_rcsum(skb, VLAN_HLEN); won't be correct. But __pop_vlan_tci() assumes points _before_ mac addr. In vlan_set_encap_proto(), it looks for some magic L2 value after mac addr: rawp = skb->data; if (*(unsigned short *) rawp == 0xFFFF) ... Therefore __pop_vlan_tci() is obviously wrong. A quick fix is avoiding using skb->data in vlan_set_encap_proto(), use 'vhdr+1' is always correct in both cases. Signed-off-by: Cong Wang <amwang@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jesse Gross <jesse@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28sock_diag: Fix out-of-bounds access to sock_diag_handlers[]Mathias Krause
[ Upstream commit 6e601a53566d84e1ffd25e7b6fe0b6894ffd79c0 ] Userland can send a netlink message requesting SOCK_DIAG_BY_FAMILY with a family greater or equal then AF_MAX -- the array size of sock_diag_handlers[]. The current code does not test for this condition therefore is vulnerable to an out-of-bound access opening doors for a privilege escalation. Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ipv6: use a stronger hash for tcpEric Dumazet
[ Upstream commit 08dcdbf6a7b9d14c2302c5bd0c5390ddf122f664 ] It looks like its possible to open thousands of TCP IPv6 sessions on a server, all landing in a single slot of TCP hash table. Incoming packets have to lookup sockets in a very long list. We should hash all bits from foreign IPv6 addresses, using a salt and hash mix, not a simple XOR. inet6_ehashfn() can also separately use the ports, instead of xoring them. Reported-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ipv4: fix a bug in ping_err().Li Wei
[ Upstream commit b531ed61a2a2a77eeb2f7c88b49aa5ec7d9880d8 ] We should get 'type' and 'code' from the outer ICMP header. Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28net: fix a compile error when SOCK_REFCNT_DEBUG is enabledYing Xue
[ Upstream commit dec34fb0f5b7873de45132a84a3af29e61084a6b ] When SOCK_REFCNT_DEBUG is enabled, below build error is met: kernel/sysctl_binary.o: In function `sk_refcnt_debug_release': include/net/sock.h:1025: multiple definition of `sk_refcnt_debug_release' kernel/sysctl.o:include/net/sock.h:1025: first defined here kernel/audit.o: In function `sk_refcnt_debug_release': include/net/sock.h:1025: multiple definition of `sk_refcnt_debug_release' kernel/sysctl.o:include/net/sock.h:1025: first defined here make[1]: *** [kernel/built-in.o] Error 1 make: *** [kernel] Error 2 So we decide to make sk_refcnt_debug_release static to eliminate the error. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28xen-netback: cancel the credit timer when taking the vif downDavid Vrabel
[ Upstream commit 3e55f8b306cf305832a4ac78aa82e1b40e818ece ] If the credit timer is left armed after calling xen_netbk_remove_xenvif(), then it may fire and attempt to schedule the vif which will then oops as vif->netbk == NULL. This may happen both in the fatal error path and during normal disconnection from the front end. The sequencing during shutdown is critical to ensure that: a) vif->netbk doesn't become unexpectedly NULL; and b) the net device/vif is not freed. 1. Mark as unschedulable (netif_carrier_off()). 2. Synchronously cancel the timer. 3. Remove the vif from the schedule list. 4. Remove it from it netback thread group. 5. Wait for vif->refcnt to become 0. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Reported-by: Christopher S. Aker <caker@theshore.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28xen-netback: correctly return errors from netbk_count_requests()David Vrabel
[ Upstream commit 35876b5ffc154c357476b2c3bdab10feaf4bd8f0 ] netbk_count_requests() could detect an error, call netbk_fatal_tx_error() but return 0. The vif may then be used afterwards (e.g., in a call to netbk_tx_error(). Since netbk_fatal_tx_error() could set vif->refcnt to 1, the vif may be freed immediately after the call to netbk_fatal_tx_error() (e.g., if the vif is also removed). Netback thread Xenwatch thread ------------------------------------------- netbk_fatal_tx_err() netback_remove() xenvif_disconnect() ... free_netdev() netbk_tx_err() Oops! Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reported-by: Christopher S. Aker <caker@theshore.net> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28net: fix infinite loop in __skb_recv_datagram()Eric Dumazet
[ Upstream commit 77c1090f94d1b0b5186fb13a1b71b47b1343f87f ] Tommi was fuzzing with trinity and reported the following problem : commit 3f518bf745 (datagram: Add offset argument to __skb_recv_datagram) missed that a raw socket receive queue can contain skbs with no payload. We can loop in __skb_recv_datagram() with MSG_PEEK mode, because wait_for_packet() is not prepared to skip these skbs. [ 83.541011] INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=26002 jiffies, g=27673, c=27672, q=75) [ 83.541011] INFO: Stall ended before state dump start [ 108.067010] BUG: soft lockup - CPU#0 stuck for 22s! [trinity-child31:2847] ... [ 108.067010] Call Trace: [ 108.067010] [<ffffffff818cc103>] __skb_recv_datagram+0x1a3/0x3b0 [ 108.067010] [<ffffffff818cc33d>] skb_recv_datagram+0x2d/0x30 [ 108.067010] [<ffffffff819ed43d>] rawv6_recvmsg+0xad/0x240 [ 108.067010] [<ffffffff818c4b04>] sock_common_recvmsg+0x34/0x50 [ 108.067010] [<ffffffff818bc8ec>] sock_recvmsg+0xbc/0xf0 [ 108.067010] [<ffffffff818bf31e>] sys_recvfrom+0xde/0x150 [ 108.067010] [<ffffffff81ca4329>] system_call_fastpath+0x16/0x1b Reported-by: Tommi Rantala <tt.rantala@gmail.com> Tested-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28bridge: set priority of STP packetsStephen Hemminger
[ Upstream commit 547b4e718115eea74087e28d7fa70aec619200db ] Spanning Tree Protocol packets should have always been marked as control packets, this causes them to get queued in the high prirority FIFO. As Radia Perlman mentioned in her LCA talk, STP dies if bridge gets overloaded and can't communicate. This is a long-standing bug back to the first versions of Linux bridge. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28HID: wiimote: fix nunchuck button parserDavid Herrmann
commit 89bdd0c6f38ccf0de43d5a36ede384a730f3394e upstream. The buttons of the Wii Remote Nunchuck extension are actually active low. Fix the parser to forward the inverted values. The comment in the function always said "0 == pressed" but the implementation was wrong from the beginning. Reported-by: Victor Quicksilver <victor.quicksilver@gmail.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28mmc: sdhci-esdhc-imx: fix host version readShawn Guo
commit ef4d0888bb7e1b963880f086575081c3d39cad2d upstream. When commit 95a2482 (mmc: sdhci-esdhc-imx: add basic imx6q usdhc support) works around host version issue on imx6q, it gets the register address fixup "reg ^= 2" lost for imx25/35/51/53 esdhc. Thus, the controller version on these SoCs is wrongly identified as v1 while it's actually v2. Add the address fixup back and take a different approach to correct imx6q host version, so that the host version read gets back to work for all SoCs. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28fb: Yet another band-aid for fixing lockdep messTakashi Iwai
commit e93a9a868792ad71cdd09d75e5a02d8067473c4e upstream. I've still got lockdep warnings even after Alan's patch, and it seems that yet more band aids are required to paper over similar paths for unbind_con_driver() and unregister_con_driver(). After this hack, lockdep warnings are finally gone. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Alan Cox <alan@linux.intel.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Jiri Kosina <jkosina@suse.cz> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28fb: rework locking to fix lock ordering on takeoverAlan Cox
commit 50e244cc793d511b86adea24972f3a7264cae114 upstream. Adjust the console layer to allow a take over call where the caller already holds the locks. Make the fb layer lock in order. This is partly a band aid, the fb layer is terminally confused about the locking rules it uses for its notifiers it seems. [akpm@linux-foundation.org: remove stray non-ascii char, tidy comment] [akpm@linux-foundation.org: export do_take_over_console()] [airlied: cleanup another non-ascii char] Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Jiri Kosina <jkosina@suse.cz> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28fbcon: don't lose the console font across generic->chip driver switchDave Airlie
commit ae1287865f5361fa138d4d3b1b6277908b54eac9 upstream. If grub2 loads efifb/vesafb, then when systemd starts it can set the console font on that framebuffer device, however when we then load the native KMS driver, the first thing it does is tear down the generic framebuffer driver. The thing is the generic code is doing the right thing, it frees the font because otherwise it would leak memory. However we can assume that if you are removing the generic firmware driver (vesa/efi/offb), that a new driver *should* be loading soon after, so we effectively leak the font. However the old code left a dangling pointer in vc->vc_font.data and we can now reuse that dangling pointer to load the font into the new driver, now that we aren't freeing it. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=892340 Signed-off-by: Dave Airlie <airlied@redhat.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drivers/video: fsl-diu-fb: fix pixel formats for 24 and 16 bppAnatolij Gustschin
commit 5d3cc311a76073f6e0a27c0752f7e41f69e95ea7 upstream. Framebuffer colors for 24 and 16 bpp are currently wrong. The order of the color component arguments in the MAKE_PF() is not natural and causes some confusion. The generated pixel format values for 24 and 16 bpp depths do not much the values in the comments. Fix the macro arguments to be in the natural RGB order and adjust the arguments for all depths to generate correct pixel format values (equal to the values mentioned in the comments). Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Timur Tabi <timur@tabi.org> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28pcmcia/vrc4171: Add missing spinlock initJean Delvare
commit 811af9723859884f2f771f3174f3ddedab7c53b5 upstream. It doesn't seem this spinlock was properly initialized. This bug was introduced by commit 7a410e8d4d97457c8c381e2de9cdc7bd3306badc. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28Purge existing TLB entries in set_pte_at and ptep_set_wrprotectJohn David Anglin
commit 7139bc1579901b53db7e898789e916ee2fb52d78 upstream. This patch goes a long way toward fixing the minifail bug, and it  significantly improves the stability of SMP machines such as the rp3440.  When write  protecting a page for COW, we need to purge the existing translation.  Otherwise, the COW break doesn't occur as expected because the TLB may still have a stale entry which allows writes. [jejb: fix up checkpatch errors] Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28powerpc/kexec: Disable hard IRQ before kexecPhileas Fogg
commit 8520e443aa56cc157b015205ea53e7b9fc831291 upstream. Disable hard IRQ before kexec a new kernel image. Not doing it can result in corrupted data in the memory segments reserved for the new kernel. Signed-off-by: Phileas Fogg <phileas-fogg@mail.ru> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ARM: 7643/1: sched: correct update_sched_clock()Joonsoo Kim
commit 7c4e9ced424be4d36df6a3e3825763e97ee97607 upstream. If we want load epoch_cyc and epoch_ns atomically, we should update epoch_cyc_copy first of all. This notify reader that updating is in progress. If we update epoch_cyc first like as current implementation, there is subtle error case. Look at the below example. <Initial Condition> cyc = 9 ns = 900 cyc_copy = 9 == CASE 1 == <CPU A = reader> <CPU B = updater> write cyc = 10 read cyc = 10 read ns = 900 write ns = 1000 write cyc_copy = 10 read cyc_copy = 10 output = (10, 900) == CASE 2 == <CPU A = reader> <CPU B = updater> read cyc = 9 write cyc = 10 write ns = 1000 read ns = 1000 read cyc_copy = 9 write cyc_copy = 10 output = (9, 1000) If atomic read is ensured, output should be (9, 900) or (10, 1000). But, output in example case are not. So, change updating sequence in order to correct this problem. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ARM: samsung: fix assembly syntax for new gasArnd Bergmann
commit 2815774bb38445006074e16251b9ef5123bdc616 upstream. Recent assembler versions complain about extraneous whitespace inside [] brackets. This fixes all of these instances for the samsung platforms. We should backport this to all kernels that might need to be built with new binutils. arch/arm/kernel/entry-armv.S: Assembler messages: arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r2,[ r6,#(0x10)]' arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r0,[ r6,#(0x14)]' arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r2,[ r6,#(0x10)]' arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r0,[ r6,#(0x14)]' arch/arm/mach-s3c24xx/sleep-s3c2410.S: Assembler messages: arch/arm/mach-s3c24xx/sleep-s3c2410.S:48: Error: ARM register expected -- `ldr r7,[ r4 ]' arch/arm/mach-s3c24xx/sleep-s3c2410.S:49: Error: ARM register expected -- `ldr r8,[ r5 ]' arch/arm/mach-s3c24xx/sleep-s3c2410.S:50: Error: ARM register expected -- `ldr r9,[ r6 ]' arch/arm/mach-s3c24xx/sleep-s3c2410.S:64: Error: ARM register expected -- `streq r7,[ r4 ]' arch/arm/mach-s3c24xx/sleep-s3c2410.S:65: Error: ARM register expected -- `streq r8,[ r5 ]' arch/arm/mach-s3c24xx/sleep-s3c2410.S:66: Error: ARM register expected -- `streq r9,[ r6 ]' arch/arm/kernel/debug.S: Assembler messages: arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r2,#((0x0B0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-((0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))]' arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]' arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r2,#((0x0B0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-((0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))]' arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]' arch/arm/mach-s3c24xx/pm-h1940.S: Assembler messages: arch/arm/mach-s3c24xx/pm-h1940.S:33: Error: ARM register expected -- `ldr pc,[ r0,#((0x0B8)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000)))]' arch/arm/mach-s3c24xx/sleep-s3c2412.S: Assembler messages: arch/arm/mach-s3c24xx/sleep-s3c2412.S:60: Error: ARM register expected -- `ldrne r9,[ r1 ]' arch/arm/mach-s3c24xx/sleep-s3c2412.S:61: Error: ARM register expected -- `strne r9,[ r1 ]' arch/arm/mach-s3c24xx/sleep-s3c2412.S:62: Error: ARM register expected -- `ldrne r9,[ r2 ]' arch/arm/mach-s3c24xx/sleep-s3c2412.S:63: Error: ARM register expected -- `strne r9,[ r2 ]' arch/arm/mach-s3c24xx/sleep-s3c2412.S:64: Error: ARM register expected -- `ldrne r9,[ r3 ]' arch/arm/mach-s3c24xx/sleep-s3c2412.S:65: Error: ARM register expected -- `strne r9,[ r3 ]' arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x08)]' arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]' arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x10)]' arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x08)]' arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]' arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x10)]' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ARM: PXA3xx: program the CSMSADRCFG registerIgor Grinberg
commit d107a204154ddd79339203c2deeb7433f0cf6777 upstream. The Chip Select Configuration Register must be programmed to 0x2 in order to achieve the correct behavior of the Static Memory Controller. Without this patch devices wired to DFI and accessed through SMC cannot be accessed after resume from S2. Do not rely on the boot loader to program the CSMSADRCFG register by programming it in the kernel smemc module. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ASoC: wm2200: correct IN2L and IN3L digital muteChris Rattray
commit 0d2b6422529a26ac4dee06196524ba9da70cf735 upstream. Signed-off-by: Chris Rattray <crattray@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28staging: vt6656: Fix URB submitted while active warning.Malcolm Priestley
commit ae5943de8c8c4438cbac5cda599ff0b88c224468 upstream. This error happens because PIPEnsControlOut and PIPEnsControlIn unlock the spin lock for delay, letting in another thread. The patch moves the current MP_SET_FLAG to before filling of sUsbCtlRequest for pControlURB and clears it in event of failing. Any thread calling either function while fMP_CONTROL_READS or fMP_CONTROL_WRITES flags set will return STATUS_FAILURE. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28staging: comedi: disallow COMEDI_DEVCONFIG on non-board minorsIan Abbott
commit 754ab5c0e55dd118273ca2c217c4d95e9fbc8259 upstream. Comedi has two sorts of minor devices: (a) normal board minor devices in the range 0 to COMEDI_NUM_BOARD_MINORS-1 inclusive; and (b) special subdevice minor devices in the range COMEDI_NUM_BOARD_MINORS upwards that are used to open the same underlying comedi device as the normal board minor devices, but with non-default read and write subdevices for asynchronous commands. The special subdevice minor devices get created when a board supporting asynchronous commands is attached to a normal board minor device, and destroyed when the board is detached from the normal board minor device. One way to attach or detach a board is by using the COMEDI_DEVCONFIG ioctl. This should only be used on normal board minors as the special subdevice minors are too ephemeral. In particular, the change introduced in commit 7d3135af399e92cf4c9bbc5f86b6c140aab3b88c ("staging: comedi: prevent auto-unconfig of manually configured devices") breaks horribly for special subdevice minor devices. Since there's no legitimate use for the COMEDI_DEVCONFIG ioctl on a special subdevice minor device node, disallow it and return -ENOTTY. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm/i915: Set i9xx sdvo clock limits according to specificationsPatrik Jakobsson
commit 4f7dfb6788dd022446847fbbfbe45e13bedb5be2 upstream. The Intel PRM says the M1 and M2 divisors must be in the range of 10-20 and 5-9. Since we do all calculations based on them being register values (which are subtracted by 2) we need to specify them accordingly. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56359 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm/i915: disable shared panel fitter for pipeMika Kuoppala
commit 24a1f16de97c4cf0029d9acd04be06db32208726 upstream. If encoder is switched off by BIOS, but the panel fitter is left on, we never try to turn off the panel fitter and leave it still attached to the pipe - which can cause blurry output elsewhere. Based on work by Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58867 Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Tested-by: Andreas Sturmlechner <andreas.sturmlechner@gmail.com> [danvet: Remove the redundant HAS_PCH_SPLIT check and add a tiny comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28intel/iommu: force writebuffer-flush quirk on Gen 4 ChipsetsDaniel Vetter
commit 210561ffd72d00eccf12c0131b8024d5436bae95 upstream. We already have the quirk entry for the mobile platform, but also reports on some desktop versions. So be paranoid and set it everywhere. References: http://www.mail-archive.com/dri-devel@lists.freedesktop.org/msg33138.html Reported-and-tested-by: Mihai Moldovan <ionic@ionic.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Sankaran, Rajesh" <rajesh.sankaran@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28target: Fix divide by zero bug in fabric_max_sectors for unconfigured devicesNicholas Bellinger
commit 7a3cf6ca1ab2a2f7161c6dec5a787fc7a5de864e upstream This patch fixes a possible divide by zero bug when the fabric_max_sectors device attribute is written and backend se_device failed to be successfully configured -> enabled. Go ahead and use block_size=512 within se_dev_set_fabric_max_sectors() in the event of a target_configure_device() failure case, as no valid dev->dev_attrib.block_size value will have been setup yet. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm/usb: bind driver to correct deviceDave Airlie
commit 9f23de52b64f7fb801fd76f3dd8651a0dc89187b upstream. While looking at plymouth on udl I noticed that plymouth was trying to use its fb plugin not its drm one, it was trying to drmOpen a driver called usb not udl, noticed that we actually had out driver pointing at the wrong device. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm: Use C8 instead of RGB332 when determining the format from depth/bppVille Syrjälä
commit d84f031bd230fdf9c3b7734940c859bf28b90219 upstream. Support for real RGB332 is a rarity, most hardware only really support C8. So use C8 instead of RGB332 when determining the format based on depth/bpp. This fixes 8bpp fbcon on i915, since i915 will only accept C8 and not RGB332. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59572 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Tested-by: mlsemon35@gmail.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm: Fill depth/bits_per_pixel for C8 formatVille Syrjälä
commit c51a6bc5f6d328926a9a4a1247c5030faf190a80 upstream. Set depth/bits_per_pixel to 8 for C8 format. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm: don't add inferred modes for monitors that don't support themPaulo Zanoni
commit 196e077dc165a307efbd9e7569f81bbdbcf18f65 upstream. If bit 0 of the features byte (0x18) is set to 0, then, according to the EDID spec, "the display is non-continuous frequency (multi-mode) and is only specified to accept the video timing formats that are listed in Base EDID and certain Extension Blocks". For more information, please see the EDID spec, check the notes of the table that explains the "Feature Support" byte (18h) and also the notes on the tables of the section that explains "Display Range Limits & Additional Timing Description Definition (tag #FDh)". Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45729 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28vgacon/vt: clear buffer attributes when we load a 512 character font (v2)Dave Airlie
commit 2a2483072393b27f4336ab068a1f48ca19ff1c1e upstream. When we switch from 256->512 byte font rendering mode, it means the current contents of the screen is being reinterpreted. The bit that holds the high bit of the 9-bit font, may have been previously set, and thus the new font misrenders. The problem case we see is grub2 writes spaces with the bit set, so it ends up with data like 0x820, which gets reinterpreted into 0x120 char which the font translates into G with a circumflex. This flashes up on screen at boot and is quite ugly. A current side effect of this patch though is that any rendering on the screen changes color to a slightly darker color, but at least the screen no longer corrupts. v2: as suggested by hpa, always clear the attribute space, whether we are are going to or from 512 chars. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm/udl: disable fb_defio by defaultDave Airlie
commit 677d23b70bf949f75746c80cbae92c233c6b5e2a upstream. There seems to be a bad interaction between gem/shmem and defio on top, I get list corruption on the page lru in the shmem code. Turn it off for now until we get some more digging done. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm/udl: make usage as a console saferDave Airlie
commit bcb39af4486be07e896fc374a2336bad3104ae0a upstream. Okay you don't really want to use udl devices as your console, but if you are unlucky enough to do so, you run into a lot of schedule while atomic due to printk being called from all sorts of funky places. So check if we are in an atomic context, and queue the damage for later, the next printk should cause it to appear. This isn't ideal, but it is simple, and seems to work okay in my testing here. (dirty area idea came from xenfb) fixes a bunch of sleeping while atomic issues running fbcon on udl devices. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm/radeon/dce6: fix display powergatingAlex Deucher
commit 0e3d50bfcbd338254795a700dcff429a96cba1a6 upstream. Only enable it when we disable the display rather than at DPMS time since enabling it requires a full modeset to restore the display state. Fixes blank screens in certain cases. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28sunvdc: Fix off-by-one in generic_request().David S. Miller
[ Upstream commit f4d9605434c0fd4cc8639bf25cfc043418c52362 ] The 'operations' bitmap corresponds one-for-one with the operation codes, no adjustment is necessary. Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ALSA: hda - hdmi: ELD shouldn't be valid after unplugDavid Henningsson
commit bbfd8a19b6913f50a362457c34d49bfafe5e456e upstream. Currently, eld_valid is never set to false, except at kernel module load time. This patch makes sure that eld is no longer valid when the cable is (hot-)unplugged. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ALSA: hda - Workaround for silent output on Sony Vaio VGC-LN51JGB with ALC889Fernando Luis Vazquez Cao
commit 12e31a78c70dc12897fda2489113f445c0e94a18 upstream. Some Vaio all-in-one desktop PCs (for example VGC-LN51JGB) are affected by the same issue that caused Vaio Z laptops to become silent: the speaker pin must be connected to the first DAC even though the codec itself advertises flexible routing through any of the DACs. Use the no-primary-hp fixup for choosing the speaker pin as the primary so that the right DAC is assigned on this device. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28ALSA: hda - Release assigned pin/cvt at error path of hdmi_pcm_open()Takashi Iwai
commit 2ad779b7329d6894a80df94e693e72eaa0d56790 upstream. If the driver detects and invalid ELD, it gives an open error. But it forgot to release the assigned pin, converter and spdif ctls before returning. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-14 06:28:11 +0000