diff options
Diffstat (limited to 'arch/arm/boot')
-rw-r--r-- | arch/arm/boot/dts/armada-370-xp.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/armada-xp-mv78230.dtsi | 16 | ||||
-rw-r--r-- | arch/arm/boot/dts/armada-xp-mv78260.dtsi | 78 |
3 files changed, 73 insertions, 23 deletions
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 550eb772c30e..4d12d2347c15 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -51,7 +51,7 @@ coherency-fabric@20200 { compatible = "marvell,coherency-fabric"; - reg = <0x20200 0xb0>, <0x21810 0x1c>; + reg = <0x20200 0xb0>, <0x21010 0x1c>; }; serial@12000 { diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index f8eaa383e07f..f94cdbc579cb 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -81,7 +81,7 @@ /* * MV78230 has 2 PCIe units Gen2.0: One unit can be * configured as x4 or quad x1 lanes. One unit is - * x4/x1. + * x1 only. */ pcie-controller { compatible = "marvell,armada-xp-pcie"; @@ -94,10 +94,10 @@ bus-range = <0x00 0xff>; ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ @@ -165,19 +165,19 @@ status = "disabled"; }; - pcie@9,0 { + pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; ranges; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; + clocks = <&gateclk 9>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index f4029f015aff..55cdd58c155f 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -101,7 +101,7 @@ /* * MV78260 has 3 PCIe units Gen2.0: Two units can be * configured as x4 or quad x1 lanes. One unit is - * x4/x1. + * x4 only. */ pcie-controller { compatible = "marvell,armada-xp-pcie"; @@ -119,7 +119,9 @@ 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */ 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ @@ -187,35 +189,83 @@ status = "disabled"; }; - pcie@9,0 { + pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; ranges; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + + pcie@6,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + }; + + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; status = "disabled"; }; - pcie@10,0 { + pcie@8,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; ranges; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; + clocks = <&gateclk 26>; status = "disabled"; }; }; |