Merge tag 'v4.1.13' of git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable into linux-linaro-lsk-v4.1

This is the 4.1.13 stable release

# gpg: Signature made Mon Nov  9 14:34:15 2015 PST using RSA key ID 6092693E
# gpg: Good signature from "Greg Kroah-Hartman (Linux kernel stable release signing key) <greg@kroah.com>"

* tag 'v4.1.13' of git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable: (86 commits)
  Linux 4.1.13
  dts: imx6: fix sd card gpio polarity specified in device tree
  xen: fix backport of previous kexec patch
  serial: 8250_pci: Add support for 12 port Exar boards
  pinctrl: baytrail: Use raw_spinlock for locking
  pinctrl: baytrail: Serialize all register access
  thp: use is_zero_pfn() only after pte_present() check
  drm/vmwgfx: Fix up user_dmabuf refcounting
  NVMe: Fix memory leak on retried commands
  arm64: compat: fix stxr failure case in SWP emulation
  arm64: kernel: fix tcr_el1.t0sz restore on systems with extended idmap
  arm64: kernel: rename __cpu_suspend to keep it aligned with arm
  cpufreq: intel_pstate: Fix divide by zero on Knights Landing (KNL)
  IB/cm: Fix rb-tree duplicate free and use-after-free
  btrfs: fix possible leak in btrfs_ioctl_balance()
  MFD/OF: document MFD devices and handle simple-mfd
  mvsas: Fix NULL pointer dereference in mvs_slot_task_free
  irqchip/tegra: Propagate IRQ type setting to parent
  EDAC, sb_edac: Fix TAD presence check for sbridge_mci_bind_devs()
  Revert "md: allow a partially recovered device to be hot-added to an array."
  ...

40 files changed, 127 insertions, 94 deletions

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index c9df40e5cd3b..e8397879d0a7 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -354,11 +354,12 @@
 				/* SMPS9 unused */
 
 				ldo1_reg: ldo1 {
-					/* VDD_SD  */
+					/* VDD_SD / VDDSHV8  */
 					regulator-name = "ldo1";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-boot-on;
+					regulator-always-on;
 				};
 
 				ldo2_reg: ldo2 {
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index 7219ac3a3d90..9f730e8e9f87 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -46,7 +46,7 @@
 
 / {
 	model = "Marvell Armada 385 Access Point Development Board";
-	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
+	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380";
 
 	chosen {
 		stdout-path = "serial1:115200n8";
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 146e71118a72..a0ec8bff83dd 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -915,6 +915,11 @@
 	};
 };
 
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
 &rtc {
 	status = "okay";
 	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 02eb8b15374f..1171f347878a 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -878,6 +878,11 @@
 	};
 };
 
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
 &rtc {
 	status = "okay";
 	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 43cb3fd76be7..5111f5170d53 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -305,8 +305,8 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 0>;
-	wp-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -314,8 +314,8 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
-	wp-gpios = <&gpio7 1 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 78df05e9d1ce..d6515f7a56c4 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -11,6 +11,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -196,8 +197,8 @@
 };
 
 &usdhc3 {
-	cd-gpios = <&gpio6 11 0>;
-	wp-gpios = <&gpio6 14 0>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
index 703539cf36d3..00bd63e63d0c 100644
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -7,6 +7,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -161,7 +162,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
-	cd-gpios = <&gpio6 11 0>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index a43abfa21e33..5645d52850a7 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -251,7 +251,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -260,7 +260,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index e6d9195a1da7..f4d6ae564ead 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -173,7 +173,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -181,7 +181,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index d033bb182060..6a846e0ef505 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -259,6 +259,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index 2c253d6d20bd..45e7c39e80d5 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -1,3 +1,5 @@
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	regulators {
 		compatible = "simple-bus";
@@ -181,7 +183,7 @@
 &usdhc2 { /* module slot */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio2 2 0>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index b5756c21ea1d..4493f6e99330 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -318,7 +318,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 86f03c1b147c..a857d1294609 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -324,7 +324,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 4a8d97f47759..1afe3385e2d2 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -417,7 +417,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 151a3db2aea9..c6833d2b4ff5 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -41,6 +41,7 @@
  */
 #include "imx6qdl-microsom.dtsi"
 #include "imx6qdl-microsom-ar8035.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	chosen {
@@ -288,6 +289,6 @@
 		&pinctrl_hummingboard_usdhc2
 	>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 08218120e770..64e0b6178bf4 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -449,7 +449,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -457,7 +457,7 @@
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 0>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 1ce6133b67f5..9e6ecd99b472 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -409,8 +409,8 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 0>;
-	wp-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 	status = "disabled";
 };
 
@@ -418,7 +418,7 @@
         pinctrl-names = "default";
         pinctrl-0 = <&pinctrl_usdhc3
 		     &pinctrl_usdhc3_cdwp>;
-        cd-gpios = <&gpio1 27 0>;
-        wp-gpios = <&gpio1 29 0>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
         status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index 394a4ace351a..a50356243888 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -340,7 +340,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -349,6 +349,6 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 3b24b12651b2..e329ca5c3322 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -467,8 +467,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio6 15 0>;
-	wp-gpios = <&gpio1 13 0>;
+	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 0b28a9d5241e..1e27485e4293 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -444,8 +444,8 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
-	wp-gpios = <&gpio7 1 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -453,7 +453,7 @@
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 0>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index a626e6dd8022..944eb81cb2b8 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -562,8 +562,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <8>;
-	cd-gpios = <&gpio2 2 0>;
-	wp-gpios = <&gpio2 3 0>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -571,8 +571,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <8>;
-	cd-gpios = <&gpio2 0 0>;
-	wp-gpios = <&gpio2 1 0>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index f02b80b41d4f..da08de324e9e 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -680,7 +680,7 @@
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	bus-width = <4>;
 	no-1-8-v;
-	cd-gpios = <&gpio7 2 0>;
+	cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	status = "okay";
 };
@@ -690,7 +690,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	no-1-8-v;
-	cd-gpios = <&gpio7 3 0>;
+	cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 5fb091675582..9e096d811bed 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -9,6 +9,8 @@
  *
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	regulators {
 		compatible = "simple-bus";
@@ -250,13 +252,13 @@
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio3 9 0>;
+	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 945887d3fdb3..b84dff2e94ea 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -617,8 +617,8 @@
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	bus-width = <8>;
-	cd-gpios = <&gpio4 7 0>;
-	wp-gpios = <&gpio4 6 0>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -627,8 +627,8 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	cd-gpios = <&gpio5 0 0>;
-	wp-gpios = <&gpio4 29 0>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -637,6 +637,6 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio3 22 0>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index e3c0b63c2205..115f3fd78971 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -49,7 +49,7 @@
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	bus-width = <8>;
-	cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
 	keep-power-in-suspend;
 	enable-sdio-wakeup;
@@ -61,7 +61,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
 	bus-width = <8>;
-	cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	keep-power-in-suspend;
 	enable-sdio-wakup;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index cef04cef3a80..ac88c3467078 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -293,7 +293,7 @@
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	bus-width = <8>;
-	cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
 	keep-power-in-suspend;
 	enable-sdio-wakeup;
@@ -304,7 +304,7 @@
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 2b4847c7cbd4..fa36571b755a 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -111,7 +111,7 @@
 				720000  1200000
 				528000  1100000
 				312000  1000000
-				144000  900000
+				144000  1000000
 				>;
 			#cooling-cells = <2>;
 			cooling-min-level = <0>;
diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig
index f1f79d104309..60c1a0f4d67a 100644
--- a/arch/arm/kvm/Kconfig
+++ b/arch/arm/kvm/Kconfig
@@ -21,6 +21,7 @@ config KVM
 	depends on MMU && OF
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
+	select ARM_GIC
 	select HAVE_KVM_CPU_RELAX_INTERCEPT
 	select HAVE_KVM_ARCH_TLB_FLUSH_ALL
 	select KVM_MMIO
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index f5b00f41c4f6..b8b6e22f9987 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -499,7 +499,7 @@ void __init orion_ge00_switch_init(struct dsa_platform_data *d, int irq)
 
 	d->netdev = &orion_ge00.dev;
 	for (i = 0; i < d->nr_chips; i++)
-		d->chip[i].host_dev = &orion_ge00_shared.dev;
+		d->chip[i].host_dev = &orion_ge_mvmdio.dev;
 	orion_switch_device.dev.platform_data = d;
 
 	platform_device_register(&orion_switch_device);
diff --git a/arch/arm/vdso/vdsomunge.c b/arch/arm/vdso/vdsomunge.c
index aedec81d1198..f6455273b2f8 100644
--- a/arch/arm/vdso/vdsomunge.c
+++ b/arch/arm/vdso/vdsomunge.c
@@ -45,7 +45,6 @@
  * it does.
  */
 
-#include <byteswap.h>
 #include <elf.h>
 #include <errno.h>
 #include <fcntl.h>
@@ -59,6 +58,16 @@
 #include <sys/types.h>
 #include <unistd.h>
 
+#define swab16(x) \
+	((((x) & 0x00ff) << 8) | \
+	 (((x) & 0xff00) >> 8))
+
+#define swab32(x) \
+	((((x) & 0x000000ff) << 24) | \
+	 (((x) & 0x0000ff00) <<  8) | \
+	 (((x) & 0x00ff0000) >>  8) | \
+	 (((x) & 0xff000000) >> 24))
+
 #if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
 #define HOST_ORDER ELFDATA2LSB
 #elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
@@ -104,17 +113,17 @@ static void cleanup(void)
 
 static Elf32_Word read_elf_word(Elf32_Word word, bool swap)
 {
-	return swap ? bswap_32(word) : word;
+	return swap ? swab32(word) : word;
 }
 
 static Elf32_Half read_elf_half(Elf32_Half half, bool swap)
 {
-	return swap ? bswap_16(half) : half;
+	return swap ? swab16(half) : half;
 }
 
 static void write_elf_word(Elf32_Word val, Elf32_Word *dst, bool swap)
 {
-	*dst = swap ? bswap_32(val) : val;
+	*dst = swap ? swab32(val) : val;
 }
 
 int main(int argc, char **argv)
diff --git a/arch/arm64/include/asm/cpuidle.h b/arch/arm64/include/asm/cpuidle.h
index 141b2fcabaa6..0f74f05d662a 100644
--- a/arch/arm64/include/asm/cpuidle.h
+++ b/arch/arm64/include/asm/cpuidle.h
@@ -5,20 +5,16 @@
 
 #ifdef CONFIG_CPU_IDLE
 extern int arm_cpuidle_init(unsigned int cpu);
-extern int cpu_suspend(unsigned long arg);
+extern int arm_cpuidle_suspend(int index);
 #else
 static inline int arm_cpuidle_init(unsigned int cpu)
 {
 	return -EOPNOTSUPP;
 }
 
-static inline int cpu_suspend(unsigned long arg)
+static inline int arm_cpuidle_suspend(int index)
 {
 	return -EOPNOTSUPP;
 }
 #endif
-static inline int arm_cpuidle_suspend(int index)
-{
-	return cpu_suspend(index);
-}
 #endif
diff --git a/arch/arm64/include/asm/suspend.h b/arch/arm64/include/asm/suspend.h
index 003802f58963..59a5b0f1e81c 100644
--- a/arch/arm64/include/asm/suspend.h
+++ b/arch/arm64/include/asm/suspend.h
@@ -21,6 +21,6 @@ struct sleep_save_sp {
 	phys_addr_t save_ptr_stash_phys;
 };
 
-extern int __cpu_suspend(unsigned long arg, int (*fn)(unsigned long));
+extern int cpu_suspend(unsigned long arg, int (*fn)(unsigned long));
 extern void cpu_resume(void);
 #endif
diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c
index 7922c2e710ca..7ac3920b1356 100644
--- a/arch/arm64/kernel/armv8_deprecated.c
+++ b/arch/arm64/kernel/armv8_deprecated.c
@@ -279,22 +279,24 @@ static void register_insn_emulation_sysctl(struct ctl_table *table)
  */
 #define __user_swpX_asm(data, addr, res, temp, B)		\
 	__asm__ __volatile__(					\
-	"	mov		%w2, %w1\n"			\
-	"0:	ldxr"B"		%w1, [%3]\n"			\
-	"1:	stxr"B"		%w0, %w2, [%3]\n"		\
+	"0:	ldxr"B"		%w2, [%3]\n"			\
+	"1:	stxr"B"		%w0, %w1, [%3]\n"		\
 	"	cbz		%w0, 2f\n"			\
 	"	mov		%w0, %w4\n"			\
+	"	b		3f\n"				\
 	"2:\n"							\
+	"	mov		%w1, %w2\n"			\
+	"3:\n"							\
 	"	.pushsection	 .fixup,\"ax\"\n"		\
 	"	.align		2\n"				\
-	"3:	mov		%w0, %w5\n"			\
-	"	b		2b\n"				\
+	"4:	mov		%w0, %w5\n"			\
+	"	b		3b\n"				\
 	"	.popsection"					\
 	"	.pushsection	 __ex_table,\"a\"\n"		\
 	"	.align		3\n"				\
-	"	.quad		0b, 3b\n"			\
-	"	.quad		1b, 3b\n"			\
-	"	.popsection"					\
+	"	.quad		0b, 4b\n"			\
+	"	.quad		1b, 4b\n"			\
+	"	.popsection\n"					\
 	: "=&r" (res), "+r" (data), "=&r" (temp)		\
 	: "r" (addr), "i" (-EAGAIN), "i" (-EFAULT)		\
 	: "memory")
diff --git a/arch/arm64/kernel/cpuidle.c b/arch/arm64/kernel/cpuidle.c
index a78143a5c99f..2bbd0fee084f 100644
--- a/arch/arm64/kernel/cpuidle.c
+++ b/arch/arm64/kernel/cpuidle.c
@@ -37,7 +37,7 @@ int arm_cpuidle_init(unsigned int cpu)
  * Return: 0 on success, -EOPNOTSUPP if CPU suspend hook not initialized, CPU
  * operations back-end error code otherwise.
  */
-int cpu_suspend(unsigned long arg)
+int arm_cpuidle_suspend(int index)
 {
 	int cpu = smp_processor_id();
 
@@ -47,5 +47,5 @@ int cpu_suspend(unsigned long arg)
 	 */
 	if (!cpu_ops[cpu] || !cpu_ops[cpu]->cpu_suspend)
 		return -EOPNOTSUPP;
-	return cpu_ops[cpu]->cpu_suspend(arg);
+	return cpu_ops[cpu]->cpu_suspend(index);
 }
diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
index ea18cb53921e..24d4733b7e3c 100644
--- a/arch/arm64/kernel/psci.c
+++ b/arch/arm64/kernel/psci.c
@@ -546,7 +546,7 @@ static int __maybe_unused cpu_psci_cpu_suspend(unsigned long index)
 	if (state[index - 1].type == PSCI_POWER_STATE_TYPE_STANDBY)
 		ret = psci_ops.cpu_suspend(state[index - 1], 0);
 	else
-		ret = __cpu_suspend(index, psci_suspend_finisher);
+		ret = cpu_suspend(index, psci_suspend_finisher);
 
 	return ret;
 }
diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c
index 407991bf79f5..ccb6078ed9f2 100644
--- a/arch/arm64/kernel/stacktrace.c
+++ b/arch/arm64/kernel/stacktrace.c
@@ -48,11 +48,7 @@ int notrace unwind_frame(struct stackframe *frame)
 
 	frame->sp = fp + 0x10;
 	frame->fp = *(unsigned long *)(fp);
-	/*
-	 * -4 here because we care about the PC at time of bl,
-	 * not where the return will go.
-	 */
-	frame->pc = *(unsigned long *)(fp + 8) - 4;
+	frame->pc = *(unsigned long *)(fp + 8);
 
 	return 0;
 }
diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c
index d7daf45ae7a2..53f1f8dccf6c 100644
--- a/arch/arm64/kernel/suspend.c
+++ b/arch/arm64/kernel/suspend.c
@@ -51,13 +51,13 @@ void __init cpu_suspend_set_dbg_restorer(void (*hw_bp_restore)(void *))
 }
 
 /*
- * __cpu_suspend
+ * cpu_suspend
  *
  * arg: argument to pass to the finisher function
  * fn: finisher function pointer
  *
  */
-int __cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
+int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 {
 	struct mm_struct *mm = current->active_mm;
 	int ret;
@@ -80,17 +80,21 @@ int __cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 	if (ret == 0) {
 		/*
 		 * We are resuming from reset with TTBR0_EL1 set to the
-		 * idmap to enable the MMU; restore the active_mm mappings in
-		 * TTBR0_EL1 unless the active_mm == &init_mm, in which case
-		 * the thread entered __cpu_suspend with TTBR0_EL1 set to
-		 * reserved TTBR0 page tables and should be restored as such.
+		 * idmap to enable the MMU; set the TTBR0 to the reserved
+		 * page tables to prevent speculative TLB allocations, flush
+		 * the local tlb and set the default tcr_el1.t0sz so that
+		 * the TTBR0 address space set-up is properly restored.
+		 * If the current active_mm != &init_mm we entered cpu_suspend
+		 * with mappings in TTBR0 that must be restored, so we switch
+		 * them back to complete the address space configuration
+		 * restoration before returning.
 		 */
-		if (mm == &init_mm)
-			cpu_set_reserved_ttbr0();
-		else
-			cpu_switch_mm(mm->pgd, mm);
-
+		cpu_set_reserved_ttbr0();
 		flush_tlb_all();
+		cpu_set_default_tcr_t0sz();
+
+		if (mm != &init_mm)
+			cpu_switch_mm(mm->pgd, mm);
 
 		/*
 		 * Restore per-cpu offset before any kernel
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index caffb10e7aa3..5607693f35cf 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -1041,6 +1041,9 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
+	if (!rtas.entry)
+		return -EINVAL;
+
 	if (copy_from_user(&args, uargs, 3 * sizeof(u32)) != 0)
 		return -EFAULT;
 
diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index 0cdc154a22b5..4c3f76b425c1 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -667,6 +667,7 @@ setup_gop32(struct screen_info *si, efi_guid_t *proto,
 		bool conout_found = false;
 		void *dummy = NULL;
 		u32 h = handles[i];
+		u32 current_fb_base;
 
 		status = efi_call_early(handle_protocol, h,
 					proto, (void **)&gop32);
@@ -678,7 +679,7 @@ setup_gop32(struct screen_info *si, efi_guid_t *proto,
 		if (status == EFI_SUCCESS)
 			conout_found = true;
 
-		status = __gop_query32(gop32, &info, &size, &fb_base);
+		status = __gop_query32(gop32, &info, &size, &current_fb_base);
 		if (status == EFI_SUCCESS && (!first_gop || conout_found)) {
 			/*
 			 * Systems that use the UEFI Console Splitter may
@@ -692,6 +693,7 @@ setup_gop32(struct screen_info *si, efi_guid_t *proto,
 			pixel_format = info->pixel_format;
 			pixel_info = info->pixel_information;
 			pixels_per_scan_line = info->pixels_per_scan_line;
+			fb_base = current_fb_base;
 
 			/*
 			 * Once we've found a GOP supporting ConOut,
@@ -770,6 +772,7 @@ setup_gop64(struct screen_info *si, efi_guid_t *proto,
 		bool conout_found = false;
 		void *dummy = NULL;
 		u64 h = handles[i];
+		u32 current_fb_base;
 
 		status = efi_call_early(handle_protocol, h,
 					proto, (void **)&gop64);
@@ -781,7 +784,7 @@ setup_gop64(struct screen_info *si, efi_guid_t *proto,
 		if (status == EFI_SUCCESS)
 			conout_found = true;
 
-		status = __gop_query64(gop64, &info, &size, &fb_base);
+		status = __gop_query64(gop64, &info, &size, &current_fb_base);
 		if (status == EFI_SUCCESS && (!first_gop || conout_found)) {
 			/*
 			 * Systems that use the UEFI Console Splitter may
@@ -795,6 +798,7 @@ setup_gop64(struct screen_info *si, efi_guid_t *proto,
 			pixel_format = info->pixel_format;
 			pixel_info = info->pixel_information;
 			pixels_per_scan_line = info->pixels_per_scan_line;
+			fb_base = current_fb_base;
 
 			/*
 			 * Once we've found a GOP supporting ConOut,
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 0cc657160cb6..a10ed8915bf4 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -33,7 +33,7 @@
 #include <linux/memblock.h>
 #include <linux/edd.h>
 
-#ifdef CONFIG_KEXEC_CORE
+#ifdef CONFIG_KEXEC
 #include <linux/kexec.h>
 #endif
 
@@ -1802,7 +1802,7 @@ static struct notifier_block xen_hvm_cpu_notifier = {
 	.notifier_call	= xen_hvm_cpu_notify,
 };
 
-#ifdef CONFIG_KEXEC_CORE
+#ifdef CONFIG_KEXEC
 static void xen_hvm_shutdown(void)
 {
 	native_machine_shutdown();
@@ -1836,7 +1836,7 @@ static void __init xen_hvm_guest_init(void)
 	x86_init.irqs.intr_init = xen_init_IRQ;
 	xen_hvm_init_time_ops();
 	xen_hvm_init_mmu_ops();
-#ifdef CONFIG_KEXEC_CORE
+#ifdef CONFIG_KEXEC
 	machine_ops.shutdown = xen_hvm_shutdown;
 	machine_ops.crash_shutdown = xen_hvm_crash_shutdown;
 #endif