ARM: Revert "coresight: adding basic support for Vexpress TC2"

This reverts commit 63041eff2297676a345478c2b1cc6f76c63102db.  For some
reason this is causing failures before the serial console comes up on
TC2 when booted using UEFI, revert pending investigation.

Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 0 insertions, 199 deletions

diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 62e629bd3550..d2803be4e1a8 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -303,205 +303,6 @@
 		};
 	};
 
-	etb@0,20010000 {
-		compatible = "arm,coresight-etb10", "arm,primecell";
-		reg = <0 0x20010000 0 0x1000>;
-
-		coresight-default-sink;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		port {
-			etb_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port0>;
-			};
-		};
-	};
-
-	tpiu@0,20030000 {
-		compatible = "arm,coresight-tpiu", "arm,primecell";
-		reg = <0 0x20030000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		port {
-			tpiu_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port1>;
-			};
-		};
-	};
-
-	replicator {
-		/* non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell".
-		 */
-		compatible = "arm,coresight-replicator";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* replicator output ports */
-			port@0 {
-				reg = <0>;
-				replicator_out_port0: endpoint {
-					remote-endpoint = <&etb_in_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				replicator_out_port1: endpoint {
-					remote-endpoint = <&tpiu_in_port>;
-				};
-			};
-
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
-				replicator_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&funnel_out_port0>;
-				};
-			};
-		};
-	};
-
-	funnel@0,20040000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
-		reg = <0 0x20040000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
-				funnel_out_port0: endpoint {
-					remote-endpoint =
-						<&replicator_in_port0>;
-				};
-			};
-
-			/* funnel input ports */
-			port@1 {
-				reg = <0>;
-				funnel_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&ptm0_out_port>;
-				};
-			};
-
-			port@2 {
-				reg = <1>;
-				funnel_in_port1: endpoint {
-					slave-mode;
-					remote-endpoint = <&ptm1_out_port>;
-				};
-			};
-
-			port@3 {
-				reg = <2>;
-				funnel_in_port2: endpoint {
-					slave-mode;
-					remote-endpoint = <&etm0_out_port>;
-				};
-			};
-
-			/* Input port #3 is for ITM, not supported here */
-
-			port@4 {
-				reg = <4>;
-				funnel_in_port4: endpoint {
-					slave-mode;
-					remote-endpoint = <&etm1_out_port>;
-				};
-			};
-
-			port@5 {
-				reg = <5>;
-				funnel_in_port5: endpoint {
-					slave-mode;
-					remote-endpoint = <&etm2_out_port>;
-				};
-			};
-		};
-	};
-
-	ptm@0,2201c000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2201c000 0 0x1000>;
-
-		cpu = <&cpu0>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		port {
-			ptm0_out_port: endpoint {
-				remote-endpoint = <&funnel_in_port0>;
-			};
-		};
-	};
-
-	ptm@0,2201d000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2201d000 0 0x1000>;
-
-		cpu = <&cpu1>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		port {
-			ptm1_out_port: endpoint {
-				remote-endpoint = <&funnel_in_port1>;
-			};
-		};
-	};
-
-	etm@0,2203c000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2203c000 0 0x1000>;
-
-		cpu = <&cpu2>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		port {
-			etm0_out_port: endpoint {
-				remote-endpoint = <&funnel_in_port2>;
-			};
-		};
-	};
-
-	etm@0,2203d000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2203d000 0 0x1000>;
-
-		cpu = <&cpu3>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		port {
-			etm1_out_port: endpoint {
-				remote-endpoint = <&funnel_in_port4>;
-			};
-		};
-	};
-
-	etm@0,2203e000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2203e000 0 0x1000>;
-
-		cpu = <&cpu4>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		port {
-			etm2_out_port: endpoint {
-				remote-endpoint = <&funnel_in_port5>;
-			};
-		};
-	};
-
 	smb {
 		compatible = "simple-bus";