# DO NOT EDIT! MANAGED BY ANSIBLE

domain=aus-colo

# only manage dhcp for rack1
interface=em1.10  # rack 1
interface=em1.64  # rack 1 debian
interface=em1.20  # rack 2
interface=em1.30  # rack 3
interface=em1.33  # rack 3 mustang chassis

# rack1 NOTE: do not use 10.10.100.0 range (used by openstack)
dhcp-range=em1.10,10.10.0.100,10.10.3.250,255.255.0.0,24h
dhcp-range=em1.20,10.20.0.100,10.20.3.250,255.255.0.0,24h
dhcp-range=em1.30,10.30.0.100,10.30.3.250,255.255.0.0,24h
# rack3 note: 10.33.10.1->10.33.99.250 is used by openstack
dhcp-range=em1.33,10.33.0.100,10.33.3.250,255.255.0.0,24h

# rack1 hosts
{% for host in r1_hosts %}
{% if host.tag is defined %}
dhcp-host={{host.mac}},set:{{host.tag}},{{host.name}},{{host.ip}}
{% else %}
dhcp-host={{host.mac}},set:rack1,{{host.name}},{{host.ip}}
{% endif %}
{% endfor %}

# rack2 hosts
{% for host in r2_hosts %}
dhcp-host={{host.mac}},set:rack2,{{host.name}},{{host.ip}}
{% endfor %}

# rack3 hosts
{% for host in r3_hosts %}
{% if host.tag is defined %}
dhcp-host={{host.mac}},set:{{host.tag}},{{host.name}},{{host.ip}}
{% else %}
dhcp-host={{host.mac}},set:rack3,{{host.name}},{{host.ip}}
{% endif %}
{% endfor %}

enable-tftp
tftp-root=/var/lib/tftpboot/

# enable MAAS installs
dhcp-boot=tag:rack1,pxelinux.0,r1-maas-server,10.10.0.20
dhcp-boot=tag:rack2,/pxelinux/grubaa64.efi,r2-x86-1,10.20.0.20
dhcp-boot=tag:rack3,/pxelinux/bootnetaa64.efi,r2-x86-1,10.20.0.20
dhcp-boot=tag:rack3x,/pxelinux/bootnetx64.efi,r2-x86-1,10.20.0.20
dhcp-boot=tag:rack3q,/pxelinux/grub-qcom.efi,r2-x86-1,10.20.0.20