Age | Commit message (Collapse) | Author |
|
Change-Id: I83d813c91dd41707efd7b1dd81d085ffabd82c83
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32058
|
|
The prcmu driver now exists in drivers/mfd
Change-Id: I0c8d97679ee186ca8205aeeafa0030568f540d2e
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32057
|
|
This patch adds the DBX500 PRCMU Timer driver as a clocksource
and as sched_clock.
Change-Id: I5887840ac9e10fcc3afb8eac99fc7191eae782b7
Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32052
|
|
In order to avoid mcde underflow, the pixelwatermarklevel
is set based on mcde hardware version.
ST-Ericsson ID: 351086
ST-Ericsson Linux next: Not tested, ER 282779
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: Jayarami Reddy <jayarami.reddy@stericsson.com>
Change-Id: Ida63433629f84409c4c7c45c63dca4872fc1106a
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31937
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: Anders BAUER <anders.bauer@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
The purpose of the vdd_handler does not make sense. We remove it
and use a more generic approach instead. A new "ios" handler is thus
added, the purpose of which e.g. can be to control GPIO pins to
a levelshifter.
Previously the vdd_handler was also used for making additional
changes to the MMCIPOWER register bits. This option is now removed.
This patch is based upon a patch from Sebastian Rasmussen.
Change-Id: I250c7d243946acd9cc9da2d4d18394db1256cd27
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31883
|
|
The ST Micro variant supports bus signal direction indication. A new
member in the variant struct is added for this.
Moreover the actual signal direction configuration is board specific,
thus the amba mmci platform data is extended with a new member to be
able provide mmci with these specific board configurations.
This patch is based upon a patch from Sebastian Rasmussen.
Change-Id: I430ff6469ec1546b0ee438c1629c6a07fdade5f7
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31882
|
|
The VANA regulator and the dsi and dsi lp clocks must be
enabled before the DSI PLL is enabled.
ST-Ericsson ID: 343541
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: If7a4687d086b51b68be426e6eeaaffc6523a2dea
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31800
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Add driver for the accessory detection block of the
ab5500 PMIC.
The common functions from the 8500 accessory driver
are moved to abx500-accdet generic driver. This generic
driver uses callbacks registerd from the 8500 and 5500
specific driver to work as a accessory driver for a
perticluar platform.
ST Ericsson ID: 353610
ST Ericsson FOSS-OUT ID: Trivial
ST Ericsson Linux next: NA
Change-Id: Ifb06f9c9dd0dc59cbc071198c9e244a422a63af0
Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
free phy_driver memory and initialize linkid to 0.
ST-Ericsson ID: 358047
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Change-Id: Icb295648b23bd836b9f5a40a0b605e4792a8511d
Signed-off-by: Durga Prasada Rao BATHINA <durgaprasadarao.b@stericcson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31751
Reviewed-by: Bibek BASU <bibek.basu@stericsson.com>
Tested-by: Bibek BASU <bibek.basu@stericsson.com>
|
|
A function has been added to enable reinitialisation of the
fuel gauge algorithm. This can be used to to reinitialise with
a different battery voltage at start-up, for verification reasons.
ST-Ericsson ID: 357480
ST-Ericsson Linux next: Not tested
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I1ba9775e3c26f49fe746e56c01dce0d5ba8384b3
Signed-off-by: Kalle Komierowski <karl.komierowski@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31676
Reviewed-by: Bibek BASU <bibek.basu@stericsson.com>
Tested-by: Bibek BASU <bibek.basu@stericsson.com>
|
|
Remove usb_state_changed() exported function. Replace it with otg notifier call.
This makes static_di redundant so it is removed. Moreover, there is no need to
protect usb_state.usb_changed with usb_lock. So usb_lock is removed as well.
Usb state is fabricated based on the reported mA. State is not as accurate as
reading it directly from the usb controller. This should not matter as battery-
manager driver should care more about mA than the state anyway.
Change-Id: I180062a87ca773b5c215aee3ef1c60315d309d42
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31577
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Following patches for usb driver are manually merged to kernel 3.0
d11e52a ux500: usb: add usb device mode support on u5500
1fecc55 ux500: usb: enabling adb and ACM functionality in u5500_defconfig
2847bf4 ux500: usb: error handling in musb for u5500
37f22da ux500: usb: U5500 v2 update
e1b079d ux500: usb: Fix for enumeration when ON with cable
181701a ux500: usb: Fix for V2 emmc2 boot USB device issue
3a60721 mach-ux500: Handle the LinkStatus register.
086a83e usb: ux500: usb gpio enable/disable in pair
ST-Ericsson ID: 352334
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Change-Id: Id918b9a55d3b85faf7c003547748f17086af3ec7
Signed-off-by: Avinash Kumar <avinash.kumar@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30860
|
|
Adds a quirk which can be turned on for SDIO devices
that do not support 512 byte requests in byte mode during
CMD53. These requests will always be sent in block mode
instead.
This patch also enables this quirk for ST-Ericsson
CW1200 WLAN device.
Change-Id: Id31787fcbfeb0b97ba2e8c583e9363a7c08811d2
Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30931
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
|
|
Making the existing U8500 usb gpio framework to generic.
This allows other platforms to use the same structure.
ST-Ericsson ID: NA
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Change-Id: I3d5edc139e247b2373d1dd77243421e74783a0ea
Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30790
|
|
HDMI data type exposed to user space is changed from u8 to __u8.
ST-Ericsson ID: 358681
ST-Ericsson Linux next: Not tested, ER 282779
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I09f20a57f1206b7392dfcd80ebaca8baf3c2a4a1
Signed-off-by: Per Persson <per.xb.persson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/29840
Reviewed-by: QATOOLS
Reviewed-by: Anders BAUER <anders.bauer@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: QATEST
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|
|
The linux FM driver for CG2900 now supports mono-stereo
transition interrupt from the CG2900. It indicates
stereo to mono transition or vice versa. Support for RDS
Interrupt, Scan Completion Interrupt, CG2900 Reset
Interrupt, etc is also added in this patch.
ST-Ericsson ID: 324264
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I280a2a00a6f58e105d11f3a9f14ea662719c485e
Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30511
Reviewed-by: Johan PALMAEUS <johan.xj.palmaeus@stericsson.com>
Reviewed-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com>
Tested-by: Virupax SADASHIVPETIMATH <virupax.sadashivpetimath@stericsson.com>
|
|
Non default Drive Strength cannot be set automatically. It is a function
of the board design and only if there is a specific platform handler can
it be set. The platform handler needs to take into account the board
design. Pass to the platform code the necessary information.
For example: The card and host controller may indicate they support HIGH
and LOW drive strength. There is no way to know what should be chosen
without specific board knowledge. Setting HIGH may lead to reflections
and setting LOW may not suffice. There is no mechanism (like ethernet
duplex or speed pulses) to determine what should be done automatically.
If no platform handler is defined -- use the default value.
Signed-off-by: Philip Rakity <prakity@marvell.com>
Reviewed-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Change-Id: I6bf5643686cf2011df25f353d0e705f6701b51c4
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30687
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
Tested-by: Ulf HANSSON <ulf.hansson@stericsson.com>
|
|
Previously there has only been one function mmc_wait_for_req()
to start and wait for a request. This patch adds:
* mmc_start_req() - starts a request wihtout waiting
If there is on ongoing request wait for completion
of that request and start the new one and return.
Does not wait for the new command to complete.
This patch also adds new function members in struct mmc_host_ops
only called from core.c:
* pre_req - asks the host driver to prepare for the next job
* post_req - asks the host driver to clean up after a completed job
The intention is to use pre_req() and post_req() to do cache maintenance
while a request is active. pre_req() can be called while a request is
active to minimize latency to start next job. post_req() can be used after
the next job is started to clean up the request. This will minimize the
host driver request end latency. post_req() is typically used before
ending the block request and handing over the buffer to the block layer.
Add a host-private member in mmc_data to be used by pre_req to mark the
data. The host driver will then check this mark to see if the data is
prepared or not.
Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Change-Id: I1cd15d44a1c401d4e461632ccd3185f444fc96bc
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30672
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
Tested-by: Ulf HANSSON <ulf.hansson@stericsson.com>
|
|
Some host controllers will not operate without a hardware
timeout that is limited in value. However large discards
require large timeouts, so there needs to be a way to
specify the maximum discard size.
A host controller driver may now specify the maximum discard
timeout possible so that max_discard_sectors can be calculated.
However, for eMMC when the High Capacity Erase Group Size
is not in use, the timeout calculation depends on clock
rate which may change. For that case Preferred Erase Size
is used instead.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Change-Id: I2d8111ab0a31a788feb1f23c87a7d00529193620
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30671
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
Tested-by: Ulf HANSSON <ulf.hansson@stericsson.com>
|
|
If the MMC_SEND_STATUS command is not successful, we should not return
a zero status word, but instead allow the caller to know positively
that an error occurred.
Convert the open-coded get_card_status() to use the helper function,
and provide definitions for the card state field.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Change-Id: I188a24aa1f206ea33712c0c6ca32249fe4ee6606
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30592
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
Tested-by: Ulf HANSSON <ulf.hansson@stericsson.com>
|
|
Export the default PM callbacks defined for the platform bus type so
that they can be used by power domains for suspending and resuming
platform devices in the future.
Like 69c9dd1ecf446ad8a830e4afc539a2a1adc85b78 ("PM: Export platform bus
type's default PM callbacks").
Change-Id: I92aa13abe15c153aa5d90def7eb212626f6d0213
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
|
|
To determine whether the system had a thermal power off or a regular software
power off upon the next boot, the system must utilize the thermal power off
bit, ThDB8500SWoff, in AB8500 register STw4500Ctrl1.
ST-Ericsson ID: 354533
ST-Ericsson Linux next: N/A
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I07440dcdc39a86cb72aa95d86411a1f020b05cae
Signed-off-by: Daniel Willerud <daniel.willerud@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/28515
Reviewed-by: QABUILD
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Add the Cypress SPI based touchscreen for ux500.
ST-Ericsson ID: CR321190,279760
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID:10249
Ref: Commit-ids: I0b25b7e97968901ff747be62e571134ebb6ad3de
Id: Iac75daa197826d8a0bb4c1d394a834575bf601eb
Id: Iec8c5516768d85f9f8b301984618bc5b394d4927
Change-Id: I56a3a6080a90553a2a8099f2dc243d85a8229688
Signed-off-by: Avinash A <Avinash.a@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30533
Reviewed-by: Avinash A <avinash.a@stericsson.com>
Tested-by: Avinash A <avinash.a@stericsson.com>
|
|
ST-Ericsson ID: 354533
ST-Ericsson Linux next: Not tested
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I068a3c801405b6f7ca2b78df7cd9f7461ed8738b
Signed-off-by: Daniel Willerud <daniel.willerud@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/29502
Reviewed-by: QABUILD
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
In case of AB-V3, the eye diagram related issues are resolved.
So, set the device charging current to 300mA when connected to
standard host. Also, add the USB PHY tuning values to improve
the USB eye diagram
ST-Ericsson ID: 330203
ST-Ericsson Linux next: ER 330203
ST-Ericsson FOSS-OUT ID: NA
Change-Id: I7cd49289ce7e1a6d88263198e7b1258c923c1282
Signed-off-by: <thirupathi.chippakurthy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30031
Reviewed-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com>
|
|
USB Hub support musb host
ST-Ericsson ID: CR 279072
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Signed-off-by:<thirupathi.chippakurthy@stericsson.com>
Change-Id: I22ded0d7cadc8d83996336cfe3917e345c48bd45
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30052
Reviewed-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com>
|
|
Adds ability to setup SCO connection parameters through socket option.
ST-Ericsson Linux next: Not tested, ER 256277
ST-Ericsson ID: 256277
ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10137
Change-Id: If859341019fd9f7cc7c0efe95750779e84fac801
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30136
Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
Tested-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Change-Id: I11dd2a23323229096b6e0ee2d4dc68cab8919bff
|
|
Updates AV8100 firmware to version 2.3
Linux firmware interface is used.
ST-Ericsson ID: 322390
ST-Ericsson Linux next: Not tested, ER 282779
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: Per Persson <per.xb.persson@stericsson.com>
Change-Id: I7951b921538af17b3761240393a55a46c2606ddd
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30127
Reviewed-by: Naveen Kumar GADDIPATI <naveen.gaddipati@stericsson.com>
Tested-by: Naveen Kumar GADDIPATI <naveen.gaddipati@stericsson.com>
|
|
The PDP config and display Sony sy35560
is removed.
ST-Ericsson ID: 341938
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: Not tested, ER 282779
Signed-off-by: Anders Bauer <anders.bauer@stericsson.com>
Change-Id: I629336f6b7fe282145bf70dfd9a0cca2f0d3ea02
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30125
Reviewed-by: Naveen Kumar GADDIPATI <naveen.gaddipati@stericsson.com>
Tested-by: Naveen Kumar GADDIPATI <naveen.gaddipati@stericsson.com>
|
|
Migrate the following hdmi driver patches to kernel 3.0
6b7eafe video: av8100: Resume time too long
f1f105b video: av8100: Fix warnings
4de90f0 video: av8100: Add underflow detection
10470aa video: av8100: Use Linux error codes
223a03b video: av8100: Get chip cut version
0dd4c53 video: mcde: Fix Coverity defects
59346ca video: av8100: Avoid multiple firmware downloads
2814baa video: hdmi: Avoid global variables
ST-Ericsson ID: 352334
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
Change-Id: I853eb0351e9ed4e0e7f806e76d3df6ab3e4419b2
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30013
|
|
Migrate the mcde driver following patches to kernel 3.0
bf78368 video: mcde: correct DSI command set max pkt size
0dd4c53 video: mcde: Fix Coverity defects
ST-Ericsson ID: 352334
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
Change-Id: I2e89ca822915dc4c5f979f402e881b04f419b4f1
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30012
|
|
Following dispdev driver patches are migrate to kernel3.0
1e0deae misc: dispdev: Send config with a queued buffer
7d17183 [ANDROID] misc: dispdev: Release mutex in dequeue
121d315 [ANDROID] misc:dispdev: Update queue_buffer
ba5bc5e [ANDROID] misc: dispdev: Disable UI overlay
24ab123 [ANDROID]misc:dispdev: Fix garbage during rotation
751c5a1 [ANDROID] misc: dispdev: Update whole screen
530a12e [ANDROID] misc: dispdev: Only update x,y to MCDE
02e9402 video: mcde: Add tripple buffer support
6044b9d video: mcde_hdmi: Support for HDMI user space service
506b8ac misc : dispdev: Allow changing configuration on the fly.
bd93261 HWMEM: Update API
4e635a4 [ANDROID] misc: dispdev: Add dispdev driver
ST-Ericsson ID: 352334
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
Change-Id: I0f06ed83618f18f8f1ddf8c72f485900459960b9
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/29654
Reviewed-by: Rajagopala VENKATARAVANAPPA X <rajagopala.v@stericsson.com>
Tested-by: Rajagopala VENKATARAVANAPPA X <rajagopala.v@stericsson.com>
|
|
Add the following patches changes in av8100 driver
files.
1828f43 video: hdmi: Improve HDMI CEC
04ad4ac video: av8100: Add HDMI AVI Infoframe
577214f video: hdmi: Add return data for hdcp request
6d71d02 video: av8100: Add new firmware version
9c42120 video: av8100: Avoid HW access in power off mode
bc272e8 video: av8100: Reduce power consumption
ST-Ericsson ID: 352334
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Change-Id: I49914c2b8e733bf2802b7916bc1958364fe41118
Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/29569
|
|
Migrate the following b2r2 driver patches to kernel3.0
dbc424d b2r2: Add optimized path for VUY(A)888(8) 24/32-bit formats
2142b2d b2r2: Add VUY(A)888(8) 24/32-bit formats
797c68c [b2r2] Fix QA tools warning in b2r2_node_split.c
ST-Ericsson ID: 352334
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Change-Id: I5f3160a9568ad17eb05eae0b7b8adba146153ea9
Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/29563
|
|
Migrate the following commits for mcde driver files
0c80403 video: mcde: Add sony display support for DB5500
42c4245 Revert "video: mcde: Add sony display support for DB5500"
190e10f video: mcde: check for driver at suspend - resume
8a5da1e video: mcde: Configure channels and overlays for DB5500
4b15316 video: mcde: apply color conversion for DPI mode
409f44a video: mcde: Add sony display support for DB5500
585663b video: mcde: don't fail on no VANA
04ad4ac video: av8100: Add HDMI AVI Infoframe
7587405 video: mcde: Add DB5500 V2 support
91406cb video: mcde: remove PDP config
6bf7c79 video: mcde: fix suspend crash if no channel state
6d71d02 video: av8100: Add new firmware version
de0af16 mcde: fix crash on unsupported hardware version
5d46943 video: mcde: remove mdelay in DSI write
bc272e8 video: av8100: Reduce power consumption
2a22b39 video: mcde: enable mcde channel for DSI command
b441a21 video: mcde: enable reading > 1 byte in DCS cmd
ST-Ericsson ID: 352334
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Change-Id: If64e30ccb3bb789f0c6bc062d95623c4aad08be1
Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/29549
|
|
The PRCMU will manage this automatically based on the ePOD requests.
ST-Ericsson Linux next: -
ST-Ericsson ID: 332226
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I33aae94be2860f24bf5c5702f86a49525458be7d
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/27028
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
This is handled by the PRCMU.
ST-Ericsson Linux next: -
ST-Ericsson ID: 332226
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I54a12e6eb3b949f8f7457840ca047d39cf5418d9
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/26869
Reviewed-by: QATEST
Reviewed-by: Vijaya Kumar K-1 <vijay.kilari@stericsson.com>
Reviewed-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com>
|
|
Regulator updates from:
commit 7ff261a375cf1da4b9a701b7106d42f11df50b3d
Author: Avinash A <Avinash.a@stericsson.com>
Date: Fri Aug 12 16:01:23 2011 +0530
mach-ux500:ts-cypress add support on u8500
platform related changes to add support for the
cypress touchscreen on u8500
ST-Ericsson ID: CR321190
commit c7f9ac5e687f8df6f2b48f48370d2cd4479237fa
Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Date: Wed Jul 13 14:19:41 2011 +0200
regulators: ab8500: Removed initialization of body biasing
Body biasing is handled by PRCMU and should not be
overwritten by the kernel.
ST-Ericsson ID: 350693
commit 2b74dbcb79a288e709b18dbda9cf592209ad1cdf
Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Date: Fri Jul 1 18:18:18 2011 +0200
regulator: change vsmps3 from 1.0V to 0.925V
ST-Ericsson ID: 350469
commit fcfcc8a7e23970134aeb557d23726e3213e5c79d
Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Date: Tue May 31 15:43:29 2011 +0200
regulators: ab8500: Added more configurable bits
ST Ericsson ID: 334602
commit 4faa6311bef9c32ebc39d7318ec8d1ced45dce31
Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Date: Tue May 31 15:54:25 2011 +0200
ARM: ux500: regulators: add mask for configuration
There is already before a register mask in the regulator driver
to allow some bits of a register to be initialized. The register
value is defined in the board configuration. This patch puts a
mask in the board configuration to specify which bits should
actually be altered. The purpose with this patch is to avoid
future mistakes when updating the allowed bits in the regulator
driver.
ST Ericsson ID: 334602
commit a8d27ada3b9bed3f57691fa6a32c831dd48a8e3b
Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Date: Thu Jun 30 14:22:57 2011 +0200
regulator: update suspend force value for ExtSupplyRegu
For HREFP_2.2 Vext1 needs to be on otherwise AB8500 looses its register
contents during suspend. Vext2 is not connected to any regulator.
Vext3 must be turned off. Rework is need on HREFP_2.2 in order to turn off
VSMPS4_EXT_3V4
ST-Ericsson ID: 349114
commit a5dcb7001a7a42812f92461401675168943e2806
Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Date: Tue Jun 28 16:45:26 2011 +0200
regulators: update VextSupplies fix
VextSupplies fix is not need on boards with DB8500v2.1. Add check to remove
forcing of the VextSupply only for DB8500v2.2.
ST-Ericsson ID: 349724
Change-Id: Ied04ee6546d3ddcda28635d221ec1b9b5306439c
|
|
commit 1d3e28fa4e85d54434614575f37a4171e32dfe0c
Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Date: Tue Aug 23 12:28:26 2011 +0200
[Android]: pm: usecase: limit cpu frequency to 400MHz during voice-call
ST Ericsson ID: 357594
commit 70f52392190a111758836d5fca7fb533ad8b4453
Author: Rickard Andersson <rickard.andersson@stericsson.com>
Date: Tue Aug 23 11:05:58 2011 +0200
ux500: cpuidle: Correct PRCMU error messages
Show correct error messages when PRCMU requested
sleep fails.
ST-Ericsson ID: -
commit 912e987c1e46815c8cf128bce3d7077d3b05e7d6
Author: Rickard Andersson <rickard.andersson@stericsson.com>
Date: Tue Aug 23 11:00:01 2011 +0200
ux500: cpuidle: Optimize stack sizes
Optimze the stack sizes for arm registers and
CP15 registers
ST-Ericsson ID: -
commit df0c08abadbdbe19c8c00ca09c3197f3fb0ead29
Author: Rickard Andersson <rickard.andersson@stericsson.com>
Date: Mon Aug 22 11:19:13 2011 +0200
ux500: cpuidle: GIC freeze delay optimized
GIC freeze delay was previously unnecessary long.
ST-Ericsson ID: -
commit a28fec98e99d5115b62d3d704452f427ca2a20ac
Author: Rajagopala V <rajagopala.v@stericsson.com>
Date: Wed Aug 24 13:16:39 2011 +0530
u5500: cpuidle: fix coverity warning
check for clockevents_program_event return value in
cpuidle driver during wakeup
ST-Ericsson ID: ER356883
commit b716ed3140664c6b4b80381b18945032b792b853
Author: Rabin Vincent <rabin.vincent@stericsson.com>
Date: Fri Aug 19 14:32:29 2011 +0530
u5500: enable PRCMU QoS and debugging
Dummy implementations are provided to get it to build.
ST-Ericsson ID: 348762
commit 34cd29c2f8cd1ce8fa51be6d33624b441416d478
Author: om prakash <omprakash.pal@stericsson.com>
Date: Tue Aug 23 14:08:52 2011 +0530
cpuidle:Removed the CHECKED_RETURN error
Removed the CHECKED_RETURN coverity error in cpuidle.
ST-Ericsson ID: 354434
commit d9d500b6742ff1fcb12747cb55d7f26c89ef5c96
Author: Rabin Vincent <rabin.vincent@stericsson.com>
Date: Mon Aug 22 10:23:36 2011 +0530
u5500: support cpufreq only on v2
Support cpufreq only on 5500v2+ only, since that is where
the other power management features will be enabled.
ST-Ericsson ID: 355981
commit 74cf0e658bb9abe240d04427d9043f145dd0505b
Author: Hemanth Puranik <hemanth.puranik@stericsson.com>
Date: Wed Aug 3 10:29:10 2011 +0530
U5500: Print PRCMU firware version
ST-Ericsson ID: WP332193
commit bb04cadb6948a3a68f409fa7828457ce64540172
Author: Vijaya Kumar Kilari <vijay.kilari@stericsson.com>
Date: Thu Aug 11 11:49:27 2011 +0530
U5500: Add MSP1 and Cable detect clock support
MSP1 and CD clocks are managed by PRCMU FW
so special handling for these clocks are required
ST-Ericsson ID: 332193
commit 0d9b20560a729b4674d9f55c77572db04272edbd
Author: Rajagopala V <rajagopala.v@stericsson.com>
Date: Fri Aug 5 16:52:41 2011 +0530
u5500: prcmu: add irqs for db5500 temperature sensor
add irqs to support db5500 temp sensor high and low
interrupts so as to clearly distinguish whether sensor
temperature has crossed min/max values
ST-Ericsson ID: WP257616
commit 63877225cb09c38d0fbea2dcf01eb6670eb05549
Author: Jonas Aaberg <jonas.aberg@stericsson.com>
Date: Wed Jul 13 09:01:22 2011 +0200
ARM: u8500: pm: Do not touch TPIU registers if JTAG disabled
If JTAG is disabled, the Linux cannot touch the TPIU registers.
ST-Ericsson ID: 349265
commit 9fcee5876ff138e85356b63d392b2a050a68601e
Author: Jonas Aaberg <jonas.aberg@stericsson.com>
Date: Mon Jul 11 15:27:49 2011 +0200
ARM: ux500: prcmu-debug: Add ARM opp to debugfs
Add arm opp to debugfs interface, plus some code clean-up/simplification.
ST-Ericsson ID: -
commit 0e1f18385d2416e03af308cac1e38997f6bbf044
Author: Jonas Aaberg <jonas.aberg@stericsson.com>
Date: Thu Jul 14 12:49:30 2011 +0200
ARM: ux500: context: Do not touch TPIU when not clocked
ST-Ericsson ID: 352300
commit 0ebdb6b6b2a7f9924bd2785654f0abfb1473dda0
Author: Jayarami Reddy <jayarami.reddy@stericsson.com>
Date: Thu Jul 14 14:39:07 2011 +0530
u5500: fix to boot the kernel in DB5500
commit a20f6a9088ac5d34634cd26207dd5a072f04c37b
Author: Jonas Aaberg <jonas.aberg@stericsson.com>
Date: Mon Jul 11 15:26:40 2011 +0200
ARM: ux500: prcmu-qos: Add ARM OPP qos
Make it possible to request lowest ARM OPP. Must
be bound to cpufreq to actually do something.
ST-Ericsson ID: -
commit be6842df3ee21a9aa00216c84e93a643b4ddeabe
Author: Jonas Aaberg <jonas.aberg@stericsson.com>
Date: Wed Jul 13 09:00:30 2011 +0200
ARM: ux500: Read product settings at boot
ST-Ericsson ID: 349265
commit 94843c6131bac39aa8e7d0ec4c9c2b34e2819c92
Author: Jonas Aaberg <jonas.aberg@stericsson.com>
Date: Wed Jul 13 08:56:38 2011 +0200
drivers: tee: Update with product id configuration
Add structs and defines needed to detect product settings.
ST-Ericsson ID: 349265
commit 4c70d615b782965c064b3f97963eff5a290acf68
Author: Jonas Aaberg <jonas.aberg@stericsson.com>
Date: Wed Jul 6 08:26:41 2011 +0200
ARM: ux500: prcmu-wdog: Remove check for fw bug
In prcmu fw version 3.4.4 the issue with longer
intervalls than 131 s was fixed.
ST-Ericsson ID: -
commit f6ccbf262ddebe39584b4a4c01cfa16af1fbfac6
Author: Jonas Aaberg <jonas.aberg@stericsson.com>
Date: Tue Jul 12 08:53:42 2011 +0200
ARM: ux500: cpuidle: Remove duplicated ApIdle state
The ARM PLL is handled automatic by the prcmu fw and
cpuidle cannot affect it. Remove duplicated ApIdle
state that does the same as the other ApIdle state.
ST-Ericsson ID: -
commit bdf3c3dd8c22ffe0fbd8c674e8e6bdab83a5ec01
Author: Rabin Vincent <rabin.vincent@stericsson.com>
Date: Fri Jul 8 14:33:23 2011 +0530
ux500: support ApDeepSleep on 5500
ST-Ericsson ID: 332193
commit 5326d7744cd226e67253774f30a2bb57c9b2badc
Author: Rabin Vincent <rabin.vincent@stericsson.com>
Date: Mon Jul 11 11:27:45 2011 +0530
u5500: fix prcmu_get_arm_opp()
prcmu_set_arm_opp() maps between logical ARM OPP values and
PRCMU firmware values, so prcmu_get_arm_opp() should do it too.
ST-Ericsson ID: 332226
commit 6422856927e1230197ae674795eff6538df885e5
Author: Jonas Aaberg <jonas.aberg@stericsson.com>
Date: Thu Jul 7 08:33:59 2011 +0200
ARM: u8500: prcmu-dbg: display AVS settings
Add debugfs node showing AVS settings.
root@ME:/ cat /debugfs/prcmu/avs
VBB_RET : 0x 0
VBB_MAX_OPP : 0xdb
VBB_100_OPP : 0xdb
VBB_50_OPP : 0xdb
VARM_MAX_OPP : 0x2f
VARM_100_OPP : 0x2e
VARM_50_OPP : 0x1d
VARM_RET : 0x 0
VAPE_100_OPP : 0x2a
VAPE_50_OPP : 0x1a
VMOD_100_OPP : 0x29
VMOD_50_OPP : 0x1a
VSAFE : 0x29
ST-Ericsson ID: -
commit 3184873f10bff0c7c54db75d9c2694e21ebc40b0
Author: Pawel Szyszuk <pawel.szyszuk@stericsson.com>
Date: Wed Jun 22 16:03:29 2011 +0200
ARM: U5500: PRCMU CLKOUTx configuration API
U5500 API for setting the programmable CLKOUTx source and divisor.
New API used for setting the sources of camera clocks.
ST-Ericsson ID: -
commit 98e9cfc32a25f6cf3b5d4c3456bb6ff6a34ff9cb
Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Date: Thu Jun 23 16:07:48 2011 +0200
[ANDROID]: pm: usecase: add sysfs interface to disable the governor
Move all the code to control the state of the governor in a separate function.
ST-Ericsson ID: CR339643
commit 6e9ab8ab3013d0b372a51d94d617d24fd8b38664
Author: Rickard Andersson <rickard.andersson@stericsson.com>
Date: Tue Jun 7 13:04:08 2011 +0200
ARM: ux500: pm: Turn off unnecessary GIC IRQs in deep sleep
In the sleep state ApDeepSleep turn off all IRQs in the
GIC except for the PRCMU IRQs
ST-Ericsson ID: ER338876
commit ba5f28731b27386cb90cf87c4e7b1910e09474a9
Author: Rickard Andersson <rickard.andersson@stericsson.com>
Date: Fri May 27 08:56:47 2011 +0200
ARM: ux500: pm: Deepsleep bugfix and optimization
Fixing deep sleep sync problems. Also cache clean and saves to
backup RAM is now only done when really needed.
ST-Ericsson ID: ER338876
commit 0415c755958de0d613a9bd52f73b820cb3a2b916
Author: Rabin Vincent <rabin.vincent@stericsson.com>
Date: Tue Jun 28 18:18:36 2011 +0530
u5500: handle SDMMC0 clock change on DB5500v2
On DB5500v2, SDMMC0 is parented to SPARE1CLK instead of
SDMMCCLK.
Also, correct the PRCM_IRDACLK_MGT register address which is
wrong even for v1.
ST-Ericsson ID: 349062
commit 2036360d62f3c3f0cd722d751ba90a8739034c0f
Author: Rabin Vincent <rabin.vincent@stericsson.com>
Date: Mon Jun 27 20:25:06 2011 +0530
u5500: cpufreq: DB5500v2 support
ST-Ericsson ID: 349062
commit 190b11834463e835de2d792116dfd8673d775752
Author: Rabin Vincent <rabin.vincent@stericsson.com>
Date: Wed Jun 22 07:45:00 2011 +0530
u5500: allow SUSPEND_STANDBY and CPUIDLE to be enabled
ST-Ericsson ID: 332226
commit 7c4906d6ee888df46baa64b690dfdfaf44502d86
Author: Pawel Szyszuk <pawel.szyszuk@stericsson.com>
Date: Mon Jun 20 15:28:34 2011 +0200
ARM: u5500: PRCMU reset API
Added API for rebooting the board and for getting the last reboot code.
ST-Ericsson ID: 341245
Change-Id: Ibbcd9e3528cd605c724b9c2c88ae3b41a27f2f1c
|
|
For board-specific initialization.
Change-Id: I8a13382bf91608b9edf2e712cff157b14e20848a
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
|
|
Compared to HSI GPIO V3.1, register 0x82 is set with a different value
0x82 = 0xE (HSI GPIO V3.1)
0x82 = 0xF (on android)
In case of android, it seems that GPIO reset should be applied to reach 13uA
of consumption on TC35892 when AP in DeepSleep
Change-Id: I64eaa4304fcd9f71546cadba0aa703c91b6075df
Signed-off-by: David Paris <david.paris-nonst@stericsson.com>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
|
|
The TC35892 I/O Expander provides 24 GPIOs, a keypad controller, timers,
and a rotator wheel interface. This patch adds the MFD core.
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Change-Id: Ib9fe0f306c241284be763e8c65ce1bee44d22d5a
Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
|
|
Compared to HSI GPIO V3.1, register 0x82 is set with a different value
0x82 = 0xE (HSI GPIO V3.1)
0x82 = 0xF (on android)
In case of android, it seems that GPIO reset should be applied to reach 13uA
of consumption on TC3589x when AP in DeepSleep
Change-Id: I64eaa4304fcd9f71546cadba0aa703c91b6075df
Signed-off-by: David Paris <david.paris-nonst@stericsson.com>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/17640
|
|
support for compile time configuration of poweron key shutdown
time. Default is 10sec and can be set to 5sec or disabled
ST-Ericsson Linux next: NA
ST-Ericsson ID: WP257125
ST-Ericsson FOSS-OUT ID: NA
Change-Id: I7fbf57d21ff218370dba24182716222c354f4dc5
Signed-off-by: Rajagopala V <rajagopala.v@stericsson.com
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/28430
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
Tested-by: Rajagopala VENKATARAVANAPPA X <rajagopala.v@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
This patch removes the early drop version of ab8500 which have
the really bad version nr 0x0. It also adds support for ab8500
cut 3, MetalFix 3 or v3.3.
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: Will be done.
Change-Id: I3b8ef5dab92069bc6270a380d75ddf305715d16f
Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/26680
Reviewed-by: QATEST
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Read the interrupt registers during boot before clearing the interrupts
and save the reason as to why the board has booted.
Expose the same to user space via sysfs.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 338529
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ie27c8a1d7b89dce1a5348109b12e29a0cdae7817
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/27969
Reviewed-by: QATOOLS
Reviewed-by: Bibek BASU <bibek.basu@stericsson.com>
Reviewed-by: QATEST
Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
|
|
Following changes made:
1. support for new interrupts.
2. debugfs support for new set of registers in each banks
ST-Ericsson Linux next: 336280
ST-Ericsson ID: 257120
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I6630d3d8d660959e2d7946fc6d7b31506507a222
Signed-off-by: Bibek Basu <bibek.basu@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/27213
Reviewed-by: QATEST
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Measure Ibat and remove the resulting voltage between Vbat- and Gnd from
Vntc readings.
ST-Ericsson ID: 350661
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I232b9fc7da3ea69e2062feda98776ded33d6253b
Signed-off-by: Andrew Lynn <andrew.lynn@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/27869
Reviewed-by: QATOOLS
Reviewed-by: QABUILD
Reviewed-by: QATEST
Reviewed-by: Johan PALSSON <johan.palsson@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Reviewed-by: Karl KOMIEROWSKI <karl.komierowski@stericsson.com>
|
|
Move 'instant' current measurement, which is actually averaged over
250ms, to its own workqueue. Provide interfaces for blocking and
non-blocking clients.
ST-Ericsson ID: 350661
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: Id7daddbc4dcea4562bd76a986b4efa769c5a03c6
Signed-off-by: Andrew Lynn <andrew.lynn@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/27868
Reviewed-by: QATOOLS
Reviewed-by: QABUILD
Reviewed-by: QATEST
Reviewed-by: Johan PALSSON <johan.palsson@stericsson.com>
Reviewed-by: Karl KOMIEROWSKI <karl.komierowski@stericsson.com>
|