aboutsummaryrefslogtreecommitdiff
path: root/drivers/mmc/host/tmio_mmc_pio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/tmio_mmc_pio.c')
-rw-r--r--drivers/mmc/host/tmio_mmc_pio.c897
1 files changed, 897 insertions, 0 deletions
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
new file mode 100644
index 00000000000..6ae8d2f00ec
--- /dev/null
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -0,0 +1,897 @@
+/*
+ * linux/drivers/mmc/host/tmio_mmc_pio.c
+ *
+ * Copyright (C) 2011 Guennadi Liakhovetski
+ * Copyright (C) 2007 Ian Molton
+ * Copyright (C) 2004 Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for the MMC / SD / SDIO IP found in:
+ *
+ * TC6393XB, TC6391XB, TC6387XB, T7L66XB, ASIC3, SH-Mobile SoCs
+ *
+ * This driver draws mainly on scattered spec sheets, Reverse engineering
+ * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit
+ * support). (Further 4 bit support from a later datasheet).
+ *
+ * TODO:
+ * Investigate using a workqueue for PIO transfers
+ * Eliminate FIXMEs
+ * SDIO support
+ * Better Power management
+ * Handle MMC errors better
+ * double buffer support
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/highmem.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/tmio.h>
+#include <linux/module.h>
+#include <linux/pagemap.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+
+#include "tmio_mmc.h"
+
+static u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr)
+{
+ return readw(host->ctl + (addr << host->bus_shift));
+}
+
+static void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr,
+ u16 *buf, int count)
+{
+ readsw(host->ctl + (addr << host->bus_shift), buf, count);
+}
+
+static u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr)
+{
+ return readw(host->ctl + (addr << host->bus_shift)) |
+ readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16;
+}
+
+static void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val)
+{
+ writew(val, host->ctl + (addr << host->bus_shift));
+}
+
+static void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr,
+ u16 *buf, int count)
+{
+ writesw(host->ctl + (addr << host->bus_shift), buf, count);
+}
+
+static void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val)
+{
+ writew(val, host->ctl + (addr << host->bus_shift));
+ writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
+}
+
+void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
+{
+ u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) & ~(i & TMIO_MASK_IRQ);
+ sd_ctrl_write32(host, CTL_IRQ_MASK, mask);
+}
+
+void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
+{
+ u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) | (i & TMIO_MASK_IRQ);
+ sd_ctrl_write32(host, CTL_IRQ_MASK, mask);
+}
+
+static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i)
+{
+ sd_ctrl_write32(host, CTL_STATUS, ~i);
+}
+
+static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data)
+{
+ host->sg_len = data->sg_len;
+ host->sg_ptr = data->sg;
+ host->sg_orig = data->sg;
+ host->sg_off = 0;
+}
+
+static int tmio_mmc_next_sg(struct tmio_mmc_host *host)
+{
+ host->sg_ptr = sg_next(host->sg_ptr);
+ host->sg_off = 0;
+ return --host->sg_len;
+}
+
+#ifdef CONFIG_MMC_DEBUG
+
+#define STATUS_TO_TEXT(a, status, i) \
+ do { \
+ if (status & TMIO_STAT_##a) { \
+ if (i++) \
+ printk(" | "); \
+ printk(#a); \
+ } \
+ } while (0)
+
+static void pr_debug_status(u32 status)
+{
+ int i = 0;
+ printk(KERN_DEBUG "status: %08x = ", status);
+ STATUS_TO_TEXT(CARD_REMOVE, status, i);
+ STATUS_TO_TEXT(CARD_INSERT, status, i);
+ STATUS_TO_TEXT(SIGSTATE, status, i);
+ STATUS_TO_TEXT(WRPROTECT, status, i);
+ STATUS_TO_TEXT(CARD_REMOVE_A, status, i);
+ STATUS_TO_TEXT(CARD_INSERT_A, status, i);
+ STATUS_TO_TEXT(SIGSTATE_A, status, i);
+ STATUS_TO_TEXT(CMD_IDX_ERR, status, i);
+ STATUS_TO_TEXT(STOPBIT_ERR, status, i);
+ STATUS_TO_TEXT(ILL_FUNC, status, i);
+ STATUS_TO_TEXT(CMD_BUSY, status, i);
+ STATUS_TO_TEXT(CMDRESPEND, status, i);
+ STATUS_TO_TEXT(DATAEND, status, i);
+ STATUS_TO_TEXT(CRCFAIL, status, i);
+ STATUS_TO_TEXT(DATATIMEOUT, status, i);
+ STATUS_TO_TEXT(CMDTIMEOUT, status, i);
+ STATUS_TO_TEXT(RXOVERFLOW, status, i);
+ STATUS_TO_TEXT(TXUNDERRUN, status, i);
+ STATUS_TO_TEXT(RXRDY, status, i);
+ STATUS_TO_TEXT(TXRQ, status, i);
+ STATUS_TO_TEXT(ILL_ACCESS, status, i);
+ printk("\n");
+}
+
+#else
+#define pr_debug_status(s) do { } while (0)
+#endif
+
+static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+
+ if (enable) {
+ host->sdio_irq_enabled = 1;
+ sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
+ sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK,
+ (TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ));
+ } else {
+ sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, TMIO_SDIO_MASK_ALL);
+ sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000);
+ host->sdio_irq_enabled = 0;
+ }
+}
+
+static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
+{
+ u32 clk = 0, clock;
+
+ if (new_clock) {
+ for (clock = host->mmc->f_min, clk = 0x80000080;
+ new_clock >= (clock<<1); clk >>= 1)
+ clock <<= 1;
+ clk |= 0x100;
+ }
+
+ if (host->set_clk_div)
+ host->set_clk_div(host->pdev, (clk>>22) & 1);
+
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
+}
+
+static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
+{
+ struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
+
+ /* implicit BUG_ON(!res) */
+ if (resource_size(res) > 0x100) {
+ sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
+ msleep(10);
+ }
+
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 &
+ sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
+ msleep(10);
+}
+
+static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
+{
+ struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
+
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 |
+ sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
+ msleep(10);
+
+ /* implicit BUG_ON(!res) */
+ if (resource_size(res) > 0x100) {
+ sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
+ msleep(10);
+ }
+}
+
+static void tmio_mmc_reset(struct tmio_mmc_host *host)
+{
+ struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
+
+ /* FIXME - should we set stop clock reg here */
+ sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
+ /* implicit BUG_ON(!res) */
+ if (resource_size(res) > 0x100)
+ sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
+ msleep(10);
+ sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
+ if (resource_size(res) > 0x100)
+ sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
+ msleep(10);
+}
+
+static void tmio_mmc_reset_work(struct work_struct *work)
+{
+ struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
+ delayed_reset_work.work);
+ struct mmc_request *mrq;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ mrq = host->mrq;
+
+ /* request already finished */
+ if (!mrq
+ || time_is_after_jiffies(host->last_req_ts +
+ msecs_to_jiffies(2000))) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ return;
+ }
+
+ dev_warn(&host->pdev->dev,
+ "timeout waiting for hardware interrupt (CMD%u)\n",
+ mrq->cmd->opcode);
+
+ if (host->data)
+ host->data->error = -ETIMEDOUT;
+ else if (host->cmd)
+ host->cmd->error = -ETIMEDOUT;
+ else
+ mrq->cmd->error = -ETIMEDOUT;
+
+ host->cmd = NULL;
+ host->data = NULL;
+ host->mrq = NULL;
+ host->force_pio = false;
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ tmio_mmc_reset(host);
+
+ mmc_request_done(host->mmc, mrq);
+}
+
+static void tmio_mmc_finish_request(struct tmio_mmc_host *host)
+{
+ struct mmc_request *mrq = host->mrq;
+
+ if (!mrq)
+ return;
+
+ host->mrq = NULL;
+ host->cmd = NULL;
+ host->data = NULL;
+ host->force_pio = false;
+
+ cancel_delayed_work(&host->delayed_reset_work);
+
+ mmc_request_done(host->mmc, mrq);
+}
+
+/* These are the bitmasks the tmio chip requires to implement the MMC response
+ * types. Note that R1 and R6 are the same in this scheme. */
+#define APP_CMD 0x0040
+#define RESP_NONE 0x0300
+#define RESP_R1 0x0400
+#define RESP_R1B 0x0500
+#define RESP_R2 0x0600
+#define RESP_R3 0x0700
+#define DATA_PRESENT 0x0800
+#define TRANSFER_READ 0x1000
+#define TRANSFER_MULTI 0x2000
+#define SECURITY_CMD 0x4000
+
+static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
+{
+ struct mmc_data *data = host->data;
+ int c = cmd->opcode;
+
+ /* Command 12 is handled by hardware */
+ if (cmd->opcode == 12 && !cmd->arg) {
+ sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001);
+ return 0;
+ }
+
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE: c |= RESP_NONE; break;
+ case MMC_RSP_R1: c |= RESP_R1; break;
+ case MMC_RSP_R1B: c |= RESP_R1B; break;
+ case MMC_RSP_R2: c |= RESP_R2; break;
+ case MMC_RSP_R3: c |= RESP_R3; break;
+ default:
+ pr_debug("Unknown response type %d\n", mmc_resp_type(cmd));
+ return -EINVAL;
+ }
+
+ host->cmd = cmd;
+
+/* FIXME - this seems to be ok commented out but the spec suggest this bit
+ * should be set when issuing app commands.
+ * if(cmd->flags & MMC_FLAG_ACMD)
+ * c |= APP_CMD;
+ */
+ if (data) {
+ c |= DATA_PRESENT;
+ if (data->blocks > 1) {
+ sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100);
+ c |= TRANSFER_MULTI;
+ }
+ if (data->flags & MMC_DATA_READ)
+ c |= TRANSFER_READ;
+ }
+
+ tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_CMD);
+
+ /* Fire off the command */
+ sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg);
+ sd_ctrl_write16(host, CTL_SD_CMD, c);
+
+ return 0;
+}
+
+/*
+ * This chip always returns (at least?) as much data as you ask for.
+ * I'm unsure what happens if you ask for less than a block. This should be
+ * looked into to ensure that a funny length read doesnt hose the controller.
+ */
+static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
+{
+ struct mmc_data *data = host->data;
+ void *sg_virt;
+ unsigned short *buf;
+ unsigned int count;
+ unsigned long flags;
+
+ if ((host->chan_tx || host->chan_rx) && !host->force_pio) {
+ pr_err("PIO IRQ in DMA mode!\n");
+ return;
+ } else if (!data) {
+ pr_debug("Spurious PIO IRQ\n");
+ return;
+ }
+
+ sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags);
+ buf = (unsigned short *)(sg_virt + host->sg_off);
+
+ count = host->sg_ptr->length - host->sg_off;
+ if (count > data->blksz)
+ count = data->blksz;
+
+ pr_debug("count: %08x offset: %08x flags %08x\n",
+ count, host->sg_off, data->flags);
+
+ /* Transfer the data */
+ if (data->flags & MMC_DATA_READ)
+ sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
+ else
+ sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
+
+ host->sg_off += count;
+
+ tmio_mmc_kunmap_atomic(host->sg_ptr, &flags, sg_virt);
+
+ if (host->sg_off == host->sg_ptr->length)
+ tmio_mmc_next_sg(host);
+
+ return;
+}
+
+static void tmio_mmc_check_bounce_buffer(struct tmio_mmc_host *host)
+{
+ if (host->sg_ptr == &host->bounce_sg) {
+ unsigned long flags;
+ void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags);
+ memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length);
+ tmio_mmc_kunmap_atomic(host->sg_orig, &flags, sg_vaddr);
+ }
+}
+
+/* needs to be called with host->lock held */
+void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
+{
+ struct mmc_data *data = host->data;
+ struct mmc_command *stop;
+
+ host->data = NULL;
+
+ if (!data) {
+ dev_warn(&host->pdev->dev, "Spurious data end IRQ\n");
+ return;
+ }
+ stop = data->stop;
+
+ /* FIXME - return correct transfer count on errors */
+ if (!data->error)
+ data->bytes_xfered = data->blocks * data->blksz;
+ else
+ data->bytes_xfered = 0;
+
+ pr_debug("Completed data request\n");
+
+ /*
+ * FIXME: other drivers allow an optional stop command of any given type
+ * which we dont do, as the chip can auto generate them.
+ * Perhaps we can be smarter about when to use auto CMD12 and
+ * only issue the auto request when we know this is the desired
+ * stop command, allowing fallback to the stop command the
+ * upper layers expect. For now, we do what works.
+ */
+
+ if (data->flags & MMC_DATA_READ) {
+ if (host->chan_rx && !host->force_pio)
+ tmio_mmc_check_bounce_buffer(host);
+ dev_dbg(&host->pdev->dev, "Complete Rx request %p\n",
+ host->mrq);
+ } else {
+ dev_dbg(&host->pdev->dev, "Complete Tx request %p\n",
+ host->mrq);
+ }
+
+ if (stop) {
+ if (stop->opcode == 12 && !stop->arg)
+ sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000);
+ else
+ BUG();
+ }
+
+ tmio_mmc_finish_request(host);
+}
+
+static void tmio_mmc_data_irq(struct tmio_mmc_host *host)
+{
+ struct mmc_data *data;
+ spin_lock(&host->lock);
+ data = host->data;
+
+ if (!data)
+ goto out;
+
+ if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) {
+ /*
+ * Has all data been written out yet? Testing on SuperH showed,
+ * that in most cases the first interrupt comes already with the
+ * BUSY status bit clear, but on some operations, like mount or
+ * in the beginning of a write / sync / umount, there is one
+ * DATAEND interrupt with the BUSY bit set, in this cases
+ * waiting for one more interrupt fixes the problem.
+ */
+ if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) {
+ tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
+ tasklet_schedule(&host->dma_complete);
+ }
+ } else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) {
+ tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
+ tasklet_schedule(&host->dma_complete);
+ } else {
+ tmio_mmc_do_data_irq(host);
+ tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP);
+ }
+out:
+ spin_unlock(&host->lock);
+}
+
+static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
+ unsigned int stat)
+{
+ struct mmc_command *cmd = host->cmd;
+ int i, addr;
+
+ spin_lock(&host->lock);
+
+ if (!host->cmd) {
+ pr_debug("Spurious CMD irq\n");
+ goto out;
+ }
+
+ host->cmd = NULL;
+
+ /* This controller is sicker than the PXA one. Not only do we need to
+ * drop the top 8 bits of the first response word, we also need to
+ * modify the order of the response for short response command types.
+ */
+
+ for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
+ cmd->resp[i] = sd_ctrl_read32(host, addr);
+
+ if (cmd->flags & MMC_RSP_136) {
+ cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
+ cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24);
+ cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24);
+ cmd->resp[3] <<= 8;
+ } else if (cmd->flags & MMC_RSP_R3) {
+ cmd->resp[0] = cmd->resp[3];
+ }
+
+ if (stat & TMIO_STAT_CMDTIMEOUT)
+ cmd->error = -ETIMEDOUT;
+ else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC)
+ cmd->error = -EILSEQ;
+
+ /* If there is data to handle we enable data IRQs here, and
+ * we will ultimatley finish the request in the data_end handler.
+ * If theres no data or we encountered an error, finish now.
+ */
+ if (host->data && !cmd->error) {
+ if (host->data->flags & MMC_DATA_READ) {
+ if (host->force_pio || !host->chan_rx)
+ tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_READOP);
+ else
+ tasklet_schedule(&host->dma_issue);
+ } else {
+ if (host->force_pio || !host->chan_tx)
+ tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
+ else
+ tasklet_schedule(&host->dma_issue);
+ }
+ } else {
+ tmio_mmc_finish_request(host);
+ }
+
+out:
+ spin_unlock(&host->lock);
+}
+
+static irqreturn_t tmio_mmc_irq(int irq, void *devid)
+{
+ struct tmio_mmc_host *host = devid;
+ struct tmio_mmc_data *pdata = host->pdata;
+ unsigned int ireg, irq_mask, status;
+ unsigned int sdio_ireg, sdio_irq_mask, sdio_status;
+
+ pr_debug("MMC IRQ begin\n");
+
+ status = sd_ctrl_read32(host, CTL_STATUS);
+ irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
+ ireg = status & TMIO_MASK_IRQ & ~irq_mask;
+
+ sdio_ireg = 0;
+ if (!ireg && pdata->flags & TMIO_MMC_SDIO_IRQ) {
+ sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
+ sdio_irq_mask = sd_ctrl_read16(host, CTL_SDIO_IRQ_MASK);
+ sdio_ireg = sdio_status & TMIO_SDIO_MASK_ALL & ~sdio_irq_mask;
+
+ sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status & ~TMIO_SDIO_MASK_ALL);
+
+ if (sdio_ireg && !host->sdio_irq_enabled) {
+ pr_warning("tmio_mmc: Spurious SDIO IRQ, disabling! 0x%04x 0x%04x 0x%04x\n",
+ sdio_status, sdio_irq_mask, sdio_ireg);
+ tmio_mmc_enable_sdio_irq(host->mmc, 0);
+ goto out;
+ }
+
+ if (host->mmc->caps & MMC_CAP_SDIO_IRQ &&
+ sdio_ireg & TMIO_SDIO_STAT_IOIRQ)
+ mmc_signal_sdio_irq(host->mmc);
+
+ if (sdio_ireg)
+ goto out;
+ }
+
+ pr_debug_status(status);
+ pr_debug_status(ireg);
+
+ if (!ireg) {
+ tmio_mmc_disable_mmc_irqs(host, status & ~irq_mask);
+
+ pr_warning("tmio_mmc: Spurious irq, disabling! "
+ "0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
+ pr_debug_status(status);
+
+ goto out;
+ }
+
+ while (ireg) {
+ /* Card insert / remove attempts */
+ if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
+ tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT |
+ TMIO_STAT_CARD_REMOVE);
+ mmc_detect_change(host->mmc, msecs_to_jiffies(100));
+ }
+
+ /* CRC and other errors */
+/* if (ireg & TMIO_STAT_ERR_IRQ)
+ * handled |= tmio_error_irq(host, irq, stat);
+ */
+
+ /* Command completion */
+ if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) {
+ tmio_mmc_ack_mmc_irqs(host,
+ TMIO_STAT_CMDRESPEND |
+ TMIO_STAT_CMDTIMEOUT);
+ tmio_mmc_cmd_irq(host, status);
+ }
+
+ /* Data transfer */
+ if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
+ tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
+ tmio_mmc_pio_irq(host);
+ }
+
+ /* Data transfer completion */
+ if (ireg & TMIO_STAT_DATAEND) {
+ tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND);
+ tmio_mmc_data_irq(host);
+ }
+
+ /* Check status - keep going until we've handled it all */
+ status = sd_ctrl_read32(host, CTL_STATUS);
+ irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
+ ireg = status & TMIO_MASK_IRQ & ~irq_mask;
+
+ pr_debug("Status at end of loop: %08x\n", status);
+ pr_debug_status(status);
+ }
+ pr_debug("MMC IRQ end\n");
+
+out:
+ return IRQ_HANDLED;
+}
+
+static int tmio_mmc_start_data(struct tmio_mmc_host *host,
+ struct mmc_data *data)
+{
+ struct tmio_mmc_data *pdata = host->pdata;
+
+ pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n",
+ data->blksz, data->blocks);
+
+ /* Some hardware cannot perform 2 byte requests in 4 bit mode */
+ if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
+ int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES;
+
+ if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) {
+ pr_err("%s: %d byte block unsupported in 4 bit mode\n",
+ mmc_hostname(host->mmc), data->blksz);
+ return -EINVAL;
+ }
+ }
+
+ tmio_mmc_init_sg(host, data);
+ host->data = data;
+
+ /* Set transfer length / blocksize */
+ sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
+ sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
+
+ tmio_mmc_start_dma(host, data);
+
+ return 0;
+}
+
+/* Process requests from the MMC layer */
+static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+ int ret;
+
+ if (host->mrq)
+ pr_debug("request not null\n");
+
+ host->last_req_ts = jiffies;
+ wmb();
+ host->mrq = mrq;
+
+ if (mrq->data) {
+ ret = tmio_mmc_start_data(host, mrq->data);
+ if (ret)
+ goto fail;
+ }
+
+ ret = tmio_mmc_start_command(host, mrq->cmd);
+ if (!ret) {
+ schedule_delayed_work(&host->delayed_reset_work,
+ msecs_to_jiffies(2000));
+ return;
+ }
+
+fail:
+ host->mrq = NULL;
+ host->force_pio = false;
+ mrq->cmd->error = ret;
+ mmc_request_done(mmc, mrq);
+}
+
+/* Set MMC clock / power.
+ * Note: This controller uses a simple divider scheme therefore it cannot
+ * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
+ * MMC wont run that fast, it has to be clocked at 12MHz which is the next
+ * slowest setting.
+ */
+static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+
+ if (ios->clock)
+ tmio_mmc_set_clock(host, ios->clock);
+
+ /* Power sequence - OFF -> UP -> ON */
+ if (ios->power_mode == MMC_POWER_OFF || !ios->clock) {
+ /* power down SD bus */
+ if (ios->power_mode == MMC_POWER_OFF && host->set_pwr)
+ host->set_pwr(host->pdev, 0);
+ tmio_mmc_clk_stop(host);
+ } else if (ios->power_mode == MMC_POWER_UP) {
+ /* power up SD bus */
+ if (host->set_pwr)
+ host->set_pwr(host->pdev, 1);
+ } else {
+ /* start bus clock */
+ tmio_mmc_clk_start(host);
+ }
+
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
+ break;
+ case MMC_BUS_WIDTH_4:
+ sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
+ break;
+ }
+
+ /* Let things settle. delay taken from winCE driver */
+ udelay(140);
+}
+
+static int tmio_mmc_get_ro(struct mmc_host *mmc)
+{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+ struct tmio_mmc_data *pdata = host->pdata;
+
+ return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
+ !(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
+}
+
+static int tmio_mmc_get_cd(struct mmc_host *mmc)
+{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+ struct tmio_mmc_data *pdata = host->pdata;
+
+ if (!pdata->get_cd)
+ return -ENOSYS;
+ else
+ return pdata->get_cd(host->pdev);
+}
+
+static const struct mmc_host_ops tmio_mmc_ops = {
+ .request = tmio_mmc_request,
+ .set_ios = tmio_mmc_set_ios,
+ .get_ro = tmio_mmc_get_ro,
+ .get_cd = tmio_mmc_get_cd,
+ .enable_sdio_irq = tmio_mmc_enable_sdio_irq,
+};
+
+int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
+ struct platform_device *pdev,
+ struct tmio_mmc_data *pdata)
+{
+ struct tmio_mmc_host *_host;
+ struct mmc_host *mmc;
+ struct resource *res_ctl;
+ int ret;
+ u32 irq_mask = TMIO_MASK_CMD;
+
+ res_ctl = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res_ctl)
+ return -EINVAL;
+
+ mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &pdev->dev);
+ if (!mmc)
+ return -ENOMEM;
+
+ _host = mmc_priv(mmc);
+ _host->pdata = pdata;
+ _host->mmc = mmc;
+ _host->pdev = pdev;
+ platform_set_drvdata(pdev, mmc);
+
+ _host->set_pwr = pdata->set_pwr;
+ _host->set_clk_div = pdata->set_clk_div;
+
+ /* SD control register space size is 0x200, 0x400 for bus_shift=1 */
+ _host->bus_shift = resource_size(res_ctl) >> 10;
+
+ _host->ctl = ioremap(res_ctl->start, resource_size(res_ctl));
+ if (!_host->ctl) {
+ ret = -ENOMEM;
+ goto host_free;
+ }
+
+ mmc->ops = &tmio_mmc_ops;
+ mmc->caps = MMC_CAP_4_BIT_DATA | pdata->capabilities;
+ mmc->f_max = pdata->hclk;
+ mmc->f_min = mmc->f_max / 512;
+ mmc->max_segs = 32;
+ mmc->max_blk_size = 512;
+ mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) *
+ mmc->max_segs;
+ mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+ mmc->max_seg_size = mmc->max_req_size;
+ if (pdata->ocr_mask)
+ mmc->ocr_avail = pdata->ocr_mask;
+ else
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+ tmio_mmc_clk_stop(_host);
+ tmio_mmc_reset(_host);
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto unmap_ctl;
+
+ _host->irq = ret;
+
+ tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
+ if (pdata->flags & TMIO_MMC_SDIO_IRQ)
+ tmio_mmc_enable_sdio_irq(mmc, 0);
+
+ ret = request_irq(_host->irq, tmio_mmc_irq, IRQF_DISABLED |
+ IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), _host);
+ if (ret)
+ goto unmap_ctl;
+
+ spin_lock_init(&_host->lock);
+
+ /* Init delayed work for request timeouts */
+ INIT_DELAYED_WORK(&_host->delayed_reset_work, tmio_mmc_reset_work);
+
+ /* See if we also get DMA */
+ tmio_mmc_request_dma(_host, pdata);
+
+ mmc_add_host(mmc);
+
+ /* Unmask the IRQs we want to know about */
+ if (!_host->chan_rx)
+ irq_mask |= TMIO_MASK_READOP;
+ if (!_host->chan_tx)
+ irq_mask |= TMIO_MASK_WRITEOP;
+
+ tmio_mmc_enable_mmc_irqs(_host, irq_mask);
+
+ *host = _host;
+
+ return 0;
+
+unmap_ctl:
+ iounmap(_host->ctl);
+host_free:
+ mmc_free_host(mmc);
+
+ return ret;
+}
+EXPORT_SYMBOL(tmio_mmc_host_probe);
+
+void tmio_mmc_host_remove(struct tmio_mmc_host *host)
+{
+ mmc_remove_host(host->mmc);
+ cancel_delayed_work_sync(&host->delayed_reset_work);
+ tmio_mmc_release_dma(host);
+ free_irq(host->irq, host);
+ iounmap(host->ctl);
+ mmc_free_host(host->mmc);
+}
+EXPORT_SYMBOL(tmio_mmc_host_remove);
+
+MODULE_LICENSE("GPL v2");