aboutsummaryrefslogtreecommitdiff
path: root/drivers/enc28j60.c
blob: 98303aceee9fd9be20e857c271aea6a81a4456e2 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
/*
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <config.h>
#include <common.h>
#ifdef CONFIG_ENC28J60
#include <net.h>
#include <asm/arch/hardware.h>
#include <asm/arch/spi.h>

/*
 * Control Registers in Bank 0
 */

#define CTL_REG_ERDPTL	 0x00
#define CTL_REG_ERDPTH	 0x01
#define CTL_REG_EWRPTL	 0x02
#define CTL_REG_EWRPTH	 0x03
#define CTL_REG_ETXSTL	 0x04
#define CTL_REG_ETXSTH	 0x05
#define CTL_REG_ETXNDL	 0x06
#define CTL_REG_ETXNDH	 0x07
#define CTL_REG_ERXSTL	 0x08
#define CTL_REG_ERXSTH	 0x09
#define CTL_REG_ERXNDL	 0x0A
#define CTL_REG_ERXNDH	 0x0B
#define CTL_REG_ERXRDPTL 0x0C
#define CTL_REG_ERXRDPTH 0x0D
#define CTL_REG_ERXWRPTL 0x0E
#define CTL_REG_ERXWRPTH 0x0F
#define CTL_REG_EDMASTL  0x10
#define CTL_REG_EDMASTH  0x11
#define CTL_REG_EDMANDL  0x12
#define CTL_REG_EDMANDH  0x13
#define CTL_REG_EDMADSTL 0x14
#define CTL_REG_EDMADSTH 0x15
#define CTL_REG_EDMACSL  0x16
#define CTL_REG_EDMACSH  0x17
/* these are common in all banks */
#define CTL_REG_EIE	 0x1B
#define CTL_REG_EIR	 0x1C
#define CTL_REG_ESTAT	 0x1D
#define CTL_REG_ECON2	 0x1E
#define CTL_REG_ECON1	 0x1F

/*
 * Control Registers in Bank 1
 */

#define CTL_REG_EHT0	0x00
#define CTL_REG_EHT1	0x01
#define CTL_REG_EHT2	0x02
#define CTL_REG_EHT3	0x03
#define CTL_REG_EHT4	0x04
#define CTL_REG_EHT5	0x05
#define CTL_REG_EHT6	0x06
#define CTL_REG_EHT7	0x07
#define CTL_REG_EPMM0	0x08
#define CTL_REG_EPMM1	0x09
#define CTL_REG_EPMM2	0x0A
#define CTL_REG_EPMM3	0x0B
#define CTL_REG_EPMM4	0x0C
#define CTL_REG_EPMM5	0x0D
#define CTL_REG_EPMM6	0x0E
#define CTL_REG_EPMM7	0x0F
#define CTL_REG_EPMCSL	0x10
#define CTL_REG_EPMCSH	0x11
#define CTL_REG_EPMOL	0x14
#define CTL_REG_EPMOH	0x15
#define CTL_REG_EWOLIE	0x16
#define CTL_REG_EWOLIR	0x17
#define CTL_REG_ERXFCON 0x18
#define CTL_REG_EPKTCNT 0x19

/*
 * Control Registers in Bank 2
 */

#define CTL_REG_MACON1	 0x00
#define CTL_REG_MACON2	 0x01
#define CTL_REG_MACON3	 0x02
#define CTL_REG_MACON4	 0x03
#define CTL_REG_MABBIPG  0x04
#define CTL_REG_MAIPGL	 0x06
#define CTL_REG_MAIPGH	 0x07
#define CTL_REG_MACLCON1 0x08
#define CTL_REG_MACLCON2 0x09
#define CTL_REG_MAMXFLL  0x0A
#define CTL_REG_MAMXFLH  0x0B
#define CTL_REG_MAPHSUP  0x0D
#define CTL_REG_MICON	 0x11
#define CTL_REG_MICMD	 0x12
#define CTL_REG_MIREGADR 0x14
#define CTL_REG_MIWRL	 0x16
#define CTL_REG_MIWRH	 0x17
#define CTL_REG_MIRDL	 0x18
#define CTL_REG_MIRDH	 0x19

/*
 * Control Registers in Bank 3
 */

#define CTL_REG_MAADR1	0x00
#define CTL_REG_MAADR0	0x01
#define CTL_REG_MAADR3	0x02
#define CTL_REG_MAADR2	0x03
#define CTL_REG_MAADR5	0x04
#define CTL_REG_MAADR4	0x05
#define CTL_REG_EBSTSD	0x06
#define CTL_REG_EBSTCON 0x07
#define CTL_REG_EBSTCSL 0x08
#define CTL_REG_EBSTCSH 0x09
#define CTL_REG_MISTAT	0x0A
#define CTL_REG_EREVID	0x12
#define CTL_REG_ECOCON	0x15
#define CTL_REG_EFLOCON 0x17
#define CTL_REG_EPAUSL	0x18
#define CTL_REG_EPAUSH	0x19


/*
 * PHY Register
 */

#define PHY_REG_PHID1 0x02
#define PHY_REG_PHID2 0x03
/* taken from the Linux driver */
#define PHY_REG_PHCON1 0x00
#define PHY_REG_PHCON2 0x10
#define PHY_REG_PHLCON 0x14

/*
 * Receive Filter Register (ERXFCON) bits
 */

#define ENC_RFR_UCEN  0x80
#define ENC_RFR_ANDOR 0x40
#define ENC_RFR_CRCEN 0x20
#define ENC_RFR_PMEN  0x10
#define ENC_RFR_MPEN  0x08
#define ENC_RFR_HTEN  0x04
#define ENC_RFR_MCEN  0x02
#define ENC_RFR_BCEN  0x01

/*
 * ECON1 Register Bits
 */

#define ENC_ECON1_TXRST  0x80
#define ENC_ECON1_RXRST  0x40
#define ENC_ECON1_DMAST  0x20
#define ENC_ECON1_CSUMEN 0x10
#define ENC_ECON1_TXRTS  0x08
#define ENC_ECON1_RXEN	 0x04
#define ENC_ECON1_BSEL1  0x02
#define ENC_ECON1_BSEL0  0x01

/*
 * ECON2 Register Bits
 */
#define ENC_ECON2_AUTOINC 0x80
#define ENC_ECON2_PKTDEC  0x40
#define ENC_ECON2_PWRSV   0x20
#define ENC_ECON2_VRPS	  0x08

/*
 * EIR Register Bits
 */
#define ENC_EIR_PKTIF  0x40
#define ENC_EIR_DMAIF  0x20
#define ENC_EIR_LINKIF 0x10
#define ENC_EIR_TXIF   0x08
#define ENC_EIR_WOLIF  0x04
#define ENC_EIR_TXERIF 0x02
#define ENC_EIR_RXERIF 0x01

/*
 * ESTAT Register Bits
 */

#define ENC_ESTAT_INT	  0x80
#define ENC_ESTAT_LATECOL 0x10
#define ENC_ESTAT_RXBUSY  0x04
#define ENC_ESTAT_TXABRT  0x02
#define ENC_ESTAT_CLKRDY  0x01

/*
 * EIE Register Bits
 */

#define ENC_EIE_INTIE  0x80
#define ENC_EIE_PKTIE  0x40
#define ENC_EIE_DMAIE  0x20
#define ENC_EIE_LINKIE 0x10
#define ENC_EIE_TXIE   0x08
#define ENC_EIE_WOLIE  0x04
#define ENC_EIE_TXERIE 0x02
#define ENC_EIE_RXERIE 0x01

/*
 * MACON1 Register Bits
 */
#define ENC_MACON1_LOOPBK  0x10
#define ENC_MACON1_TXPAUS  0x08
#define ENC_MACON1_RXPAUS  0x04
#define ENC_MACON1_PASSALL 0x02
#define ENC_MACON1_MARXEN  0x01


/*
 * MACON2 Register Bits
 */
#define ENC_MACON2_MARST   0x80
#define ENC_MACON2_RNDRST  0x40
#define ENC_MACON2_MARXRST 0x08
#define ENC_MACON2_RFUNRST 0x04
#define ENC_MACON2_MATXRST 0x02
#define ENC_MACON2_TFUNRST 0x01

/*
 * MACON3 Register Bits
 */
#define ENC_MACON3_PADCFG2 0x80
#define ENC_MACON3_PADCFG1 0x40
#define ENC_MACON3_PADCFG0 0x20
#define ENC_MACON3_TXCRCEN 0x10
#define ENC_MACON3_PHDRLEN 0x08
#define ENC_MACON3_HFRMEN  0x04
#define ENC_MACON3_FRMLNEN 0x02
#define ENC_MACON3_FULDPX  0x01

/*
 * MICMD Register Bits
 */
#define ENC_MICMD_MIISCAN 0x02
#define ENC_MICMD_MIIRD   0x01

/*
 * MISTAT Register Bits
 */
#define ENC_MISTAT_NVALID 0x04
#define ENC_MISTAT_SCAN   0x02
#define ENC_MISTAT_BUSY   0x01

/*
 * PHID1 and PHID2 values
 */
#define ENC_PHID1_VALUE 0x0083
#define ENC_PHID2_VALUE 0x1400
#define ENC_PHID2_MASK	0xFC00


#define ENC_SPI_SLAVE_CS 0x00010000	/* pin P1.16 */
#define ENC_RESET	 0x00020000	/* pin P1.17 */

#define FAILSAFE_VALUE 5000

/*
 * Controller memory layout:
 *
 * 0x0000 - 0x17ff  6k bytes receive buffer
 * 0x1800 - 0x1fff  2k bytes transmit buffer
 */
/* Use the lower memory for receiver buffer. See errata pt. 5 */
#define ENC_RX_BUF_START 0x0000
#define ENC_TX_BUF_START 0x1800
/* taken from the Linux driver */
#define ENC_RX_BUF_END   0x17ff
#define ENC_TX_BUF_END   0x1fff

/* maximum frame length */
#define ENC_MAX_FRM_LEN 1518

#define enc_enable() PUT32(IO1CLR, ENC_SPI_SLAVE_CS)
#define enc_disable() PUT32(IO1SET, ENC_SPI_SLAVE_CS)
#define enc_cfg_spi() spi_set_cfg(0, 0, 0); spi_set_clock(8);


static unsigned char encReadReg (unsigned char regNo);
static void encWriteReg (unsigned char regNo, unsigned char data);
static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c);
static void encReadBuff (unsigned short length, unsigned char *pBuff);
static void encWriteBuff (unsigned short length, unsigned char *pBuff);
static void encBitSet (unsigned char regNo, unsigned char data);
static void encBitClr (unsigned char regNo, unsigned char data);
static void encReset (void);
static void encInit (unsigned char *pEthAddr);
static unsigned short phyRead (unsigned char addr);
static void phyWrite(unsigned char, unsigned short);
static void encPoll (void);
static void encRx (void);

#define m_nic_read(reg) encReadReg(reg)
#define m_nic_write(reg, data) encWriteReg(reg, data)
#define m_nic_write_retry(reg, data, count) encWriteRegRetry(reg, data, count)
#define m_nic_read_data(len, buf) encReadBuff((len), (buf))
#define m_nic_write_data(len, buf) encWriteBuff((len), (buf))

/* bit field set */
#define m_nic_bfs(reg, data) encBitSet(reg, data)

/* bit field clear */
#define m_nic_bfc(reg, data) encBitClr(reg, data)

static unsigned char bank = 0;	/* current bank in enc28j60 */
static unsigned char next_pointer_lsb;
static unsigned char next_pointer_msb;

static unsigned char buffer[ENC_MAX_FRM_LEN];
static int rxResetCounter = 0;

#define RX_RESET_COUNTER 1000;

/*-----------------------------------------------------------------------------
 * Always returns 0
 */
int eth_init (bd_t * bis)
{
	unsigned char estatVal;

	/* configure GPIO */
	(*((volatile unsigned long *) IO1DIR)) |= ENC_SPI_SLAVE_CS;
	(*((volatile unsigned long *) IO1DIR)) |= ENC_RESET;

	/* CS and RESET active low */
	PUT32 (IO1SET, ENC_SPI_SLAVE_CS);
	PUT32 (IO1SET, ENC_RESET);

	spi_init ();

	/* taken from the Linux driver - dangerous stuff here! */
	/* Wait for CLKRDY to become set (i.e., check that we can communicate with
	   the ENC) */
	do
	{
		estatVal = m_nic_read(CTL_REG_ESTAT);
	} while ((estatVal & 0x08) || (~estatVal & ENC_ESTAT_CLKRDY));

	/* initialize controller */
	encReset ();
	encInit (bis->bi_enetaddr);

	m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN);	/* enable receive */

	return 0;
}

int eth_send (volatile void *packet, int length)
{
	/* check frame length, etc. */
	/* TODO: */

	/* switch to bank 0 */
	m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));

	/* set EWRPT */
	m_nic_write (CTL_REG_EWRPTL, (ENC_TX_BUF_START & 0xff));
	m_nic_write (CTL_REG_EWRPTH, (ENC_TX_BUF_START >> 8));

	/* set ETXND */
	m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF);
	m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8);

	/* set ETXST */
	m_nic_write (CTL_REG_ETXSTL, ENC_TX_BUF_START & 0xFF);
	m_nic_write (CTL_REG_ETXSTH, ENC_TX_BUF_START >> 8);

	/* write packet */
	m_nic_write_data (length, (unsigned char *) packet);

	/* taken from the Linux driver */
	/* Verify that the internal transmit logic has not been altered by excessive
	   collisions.  See Errata B4 12 and 14.
	 */
	if (m_nic_read(CTL_REG_EIR) & ENC_EIR_TXERIF) {
		m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_TXRST);
		m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_TXRST);
	}
	m_nic_bfc(CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF));

	/* set ECON1.TXRTS */
	m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_TXRTS);

	return 0;
}


/*****************************************************************************
 * This function resets the receiver only. This function may be called from
 * interrupt-context.
 */
static void encReceiverReset (void)
{
	unsigned char econ1;

	econ1 = m_nic_read (CTL_REG_ECON1);
	if ((econ1 & ENC_ECON1_RXRST) == 0) {
		m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXRST);
		rxResetCounter = RX_RESET_COUNTER;
	}
}

/*****************************************************************************
 * receiver reset timer
 */
static void encReceiverResetCallback (void)
{
	m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXRST);
	m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN);	/* enable receive */
}

/*-----------------------------------------------------------------------------
 * Check for received packets. Call NetReceive for each packet. The return
 * value is ignored by the caller.
 */
int eth_rx (void)
{
	if (rxResetCounter > 0 && --rxResetCounter == 0) {
		encReceiverResetCallback ();
	}

	encPoll ();

	return 0;
}

void eth_halt (void)
{
	m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXEN);	/* disable receive */
}

/*****************************************************************************/

static void encPoll (void)
{
	unsigned char eir_reg;
	volatile unsigned char estat_reg;
	unsigned char pkt_cnt;

#ifdef CONFIG_USE_IRQ
	/* clear global interrupt enable bit in enc28j60 */
	m_nic_bfc (CTL_REG_EIE, ENC_EIE_INTIE);
#endif
	estat_reg = m_nic_read (CTL_REG_ESTAT);

	eir_reg = m_nic_read (CTL_REG_EIR);

	if (eir_reg & ENC_EIR_TXIF) {
		/* clear TXIF bit in EIR */
		m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXIF);
	}

	/* We have to use pktcnt and not pktif bit, see errata pt. 6 */

	/* move to bank 1 */
	m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
	m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);

	/* read pktcnt */
	pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);

	if (pkt_cnt > 0) {
		if ((eir_reg & ENC_EIR_PKTIF) == 0) {
			/*printf("encPoll: pkt cnt > 0, but pktif not set\n"); */
		}
		encRx ();
		/* clear PKTIF bit in EIR, this should not need to be done but it
		   seems like we get problems if we do not */
		m_nic_bfc (CTL_REG_EIR, ENC_EIR_PKTIF);
	}

	if (eir_reg & ENC_EIR_RXERIF) {
		printf ("encPoll: rx error\n");
		m_nic_bfc (CTL_REG_EIR, ENC_EIR_RXERIF);
	}
	if (eir_reg & ENC_EIR_TXERIF) {
		printf ("encPoll: tx error\n");
		m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXERIF);
	}

#ifdef CONFIG_USE_IRQ
	/* set global interrupt enable bit in enc28j60 */
	m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
#endif
}

static void encRx (void)
{
	unsigned short pkt_len;
	unsigned short copy_len;
	unsigned short status;
	unsigned char eir_reg;
	unsigned char pkt_cnt = 0;
	unsigned short rxbuf_rdpt;

	/* switch to bank 0 */
	m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));

	m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
	m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);

	do {
		m_nic_read_data (6, buffer);
		next_pointer_lsb = buffer[0];
		next_pointer_msb = buffer[1];
		pkt_len = buffer[2];
		pkt_len |= (unsigned short) buffer[3] << 8;
		status = buffer[4];
		status |= (unsigned short) buffer[5] << 8;

		if (pkt_len <= ENC_MAX_FRM_LEN)
			copy_len = pkt_len;
		else
			copy_len = 0;

		if ((status & (1L << 7)) == 0) /* check Received Ok bit */
			copy_len = 0;

		/* taken from the Linux driver */
		/* check if next pointer is resonable */
		if ((((unsigned int)next_pointer_msb << 8) |
			(unsigned int)next_pointer_lsb) >= ENC_TX_BUF_START)
			copy_len = 0;

		if (copy_len > 0) {
			m_nic_read_data (copy_len, buffer);
		}

		/* advance read pointer to next pointer */
		m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
		m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);

		/* decrease packet counter */
		m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC);

		/* taken from the Linux driver */
		/* Only odd values should be written to ERXRDPTL,
		 * see errata B4 pt.13
		 */
		rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1;
		if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 |
				m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt >
				(m_nic_read(CTL_REG_ERXNDH) << 8 |
				m_nic_read(CTL_REG_ERXNDL)))) {
			m_nic_write(CTL_REG_ERXRDPTL, m_nic_read(CTL_REG_ERXNDL));
			m_nic_write(CTL_REG_ERXRDPTH, m_nic_read(CTL_REG_ERXNDH));
		} else {
			m_nic_write(CTL_REG_ERXRDPTL, rxbuf_rdpt & 0xFF);
			m_nic_write(CTL_REG_ERXRDPTH, rxbuf_rdpt >> 8);
		}

		/* move to bank 1 */
		m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
		m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);

		/* read pktcnt */
		pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);

		/* switch to bank 0 */
		m_nic_bfc (CTL_REG_ECON1,
			   (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));

		if (copy_len == 0) {
			eir_reg = m_nic_read (CTL_REG_EIR);
			encReceiverReset ();
			printf ("eth_rx: copy_len=0\n");
			continue;
		}

		NetReceive ((unsigned char *) buffer, pkt_len);

		eir_reg = m_nic_read (CTL_REG_EIR);
	} while (pkt_cnt);	/* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */
}

static void encWriteReg (unsigned char regNo, unsigned char data)
{
	spi_lock ();
	enc_cfg_spi ();
	enc_enable ();

	spi_write (0x40 | regNo);	/* write in regNo */
	spi_write (data);

	enc_disable ();
	enc_enable ();

	spi_write (0x1f);	/* write reg 0x1f */

	enc_disable ();
	spi_unlock ();
}

static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c)
{
	unsigned char readback;
	int i;

	spi_lock ();

	for (i = 0; i < c; i++) {
		enc_cfg_spi ();
		enc_enable ();

		spi_write (0x40 | regNo);	/* write in regNo */
		spi_write (data);

		enc_disable ();
		enc_enable ();

		spi_write (0x1f);	/* write reg 0x1f */

		enc_disable ();

		spi_unlock ();	/* we must unlock spi first */

		readback = encReadReg (regNo);

		spi_lock ();

		if (readback == data)
			break;
	}
	spi_unlock ();

	if (i == c) {
		printf ("enc28j60: write reg %d failed\n", regNo);
	}
}

static unsigned char encReadReg (unsigned char regNo)
{
	unsigned char rxByte;

	spi_lock ();
	enc_cfg_spi ();
	enc_enable ();

	spi_write (0x1f);	/* read reg 0x1f */

	bank = spi_read () & 0x3;

	enc_disable ();
	enc_enable ();

	spi_write (regNo);
	rxByte = spi_read ();

	/* check if MAC or MII register */
	if (((bank == 2) && (regNo <= 0x1a)) ||
	    ((bank == 3) && (regNo <= 0x05 || regNo == 0x0a))) {
		/* ignore first byte and read another byte */
		rxByte = spi_read ();
	}

	enc_disable ();
	spi_unlock ();

	return rxByte;
}

static void encReadBuff (unsigned short length, unsigned char *pBuff)
{
	spi_lock ();
	enc_cfg_spi ();
	enc_enable ();

	spi_write (0x20 | 0x1a);	/* read buffer memory */

	while (length--) {
		if (pBuff != NULL)
			*pBuff++ = spi_read ();
		else
			spi_write (0);
	}

	enc_disable ();
	spi_unlock ();
}

static void encWriteBuff (unsigned short length, unsigned char *pBuff)
{
	spi_lock ();
	enc_cfg_spi ();
	enc_enable ();

	spi_write (0x60 | 0x1a);	/* write buffer memory */

	spi_write (0x00);	/* control byte */

	while (length--)
		spi_write (*pBuff++);

	enc_disable ();
	spi_unlock ();
}

static void encBitSet (unsigned char regNo, unsigned char data)
{
	spi_lock ();
	enc_cfg_spi ();
	enc_enable ();

	spi_write (0x80 | regNo);	/* bit field set */
	spi_write (data);

	enc_disable ();
	spi_unlock ();
}

static void encBitClr (unsigned char regNo, unsigned char data)
{
	spi_lock ();
	enc_cfg_spi ();
	enc_enable ();

	spi_write (0xA0 | regNo);	/* bit field clear */
	spi_write (data);

	enc_disable ();
	spi_unlock ();
}

static void encReset (void)
{
	spi_lock ();
	enc_cfg_spi ();
	enc_enable ();

	spi_write (0xff);	/* soft reset */

	enc_disable ();
	spi_unlock ();

	/* sleep 1 ms. See errata pt. 2 */
	udelay (1000);
}

static void encInit (unsigned char *pEthAddr)
{
	unsigned short phid1 = 0;
	unsigned short phid2 = 0;

	/* switch to bank 0 */
	m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));

	/*
	 * Setup the buffer space. The reset values are valid for the
	 * other pointers.
	 */
	/* We shall not write to ERXST, see errata pt. 5. Instead we
	   have to make sure that ENC_RX_BUS_START is 0. */
	m_nic_write_retry (CTL_REG_ERXSTL, (ENC_RX_BUF_START & 0xFF), 1);
	m_nic_write_retry (CTL_REG_ERXSTH, (ENC_RX_BUF_START >> 8), 1);

	/* taken from the Linux driver */
	m_nic_write_retry (CTL_REG_ERXNDL, (ENC_RX_BUF_END & 0xFF), 1);
	m_nic_write_retry (CTL_REG_ERXNDH, (ENC_RX_BUF_END >> 8), 1);

	m_nic_write_retry (CTL_REG_ERDPTL, (ENC_RX_BUF_START & 0xFF), 1);
	m_nic_write_retry (CTL_REG_ERDPTH, (ENC_RX_BUF_START >> 8), 1);

	next_pointer_lsb = (ENC_RX_BUF_START & 0xFF);
	next_pointer_msb = (ENC_RX_BUF_START >> 8);

	/* verify identification */
	phid1 = phyRead (PHY_REG_PHID1);
	phid2 = phyRead (PHY_REG_PHID2);

	if (phid1 != ENC_PHID1_VALUE
	    || (phid2 & ENC_PHID2_MASK) != ENC_PHID2_VALUE) {
		printf ("ERROR: failed to identify controller\n");
		printf ("phid1 = %x, phid2 = %x\n",
			phid1, (phid2 & ENC_PHID2_MASK));
		printf ("should be phid1 = %x, phid2 = %x\n",
			ENC_PHID1_VALUE, ENC_PHID2_VALUE);
	}

	/*
	 * --- MAC Initialization ---
	 */

	/* Pull MAC out of Reset */

	/* switch to bank 2 */
	m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
	m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);

	/* enable MAC to receive frames */
	/* added some bits from the Linux driver */
	m_nic_write_retry (CTL_REG_MACON1
		,(ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS)
		,10);

	/* configure pad, tx-crc and duplex */
	/* added a bit from the Linux driver */
	m_nic_write_retry (CTL_REG_MACON3
		,(ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN)
		,10);

	/* added 4 new lines from the Linux driver */
	/* Allow infinite deferals if the medium is continously busy */
	m_nic_write_retry(CTL_REG_MACON4, (1<<6) /*ENC_MACON4_DEFER*/, 10);

	/* Late collisions occur beyond 63 bytes */
	m_nic_write_retry(CTL_REG_MACLCON2, 63, 10);

	/* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */
	m_nic_write_retry(CTL_REG_MAIPGL, 0x12, 10);

	/*
	* Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended
	* 0x0c for half-duplex. Nothing for full-duplex
	*/
	m_nic_write_retry(CTL_REG_MAIPGH, 0x0C, 10);

	/* set maximum frame length */
	m_nic_write_retry (CTL_REG_MAMXFLL, (ENC_MAX_FRM_LEN & 0xff), 10);
	m_nic_write_retry (CTL_REG_MAMXFLH, (ENC_MAX_FRM_LEN >> 8), 10);

	/*
	 * Set MAC back-to-back inter-packet gap. Recommended 0x12 for half duplex
	 * and 0x15 for full duplex.
	 */
	m_nic_write_retry (CTL_REG_MABBIPG, 0x12, 10);

	/* set MAC address */

	/* switch to bank 3 */
	m_nic_bfs (CTL_REG_ECON1, (ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1));

	m_nic_write_retry (CTL_REG_MAADR0, pEthAddr[5], 1);
	m_nic_write_retry (CTL_REG_MAADR1, pEthAddr[4], 1);
	m_nic_write_retry (CTL_REG_MAADR2, pEthAddr[3], 1);
	m_nic_write_retry (CTL_REG_MAADR3, pEthAddr[2], 1);
	m_nic_write_retry (CTL_REG_MAADR4, pEthAddr[1], 1);
	m_nic_write_retry (CTL_REG_MAADR5, pEthAddr[0], 1);

	/*
	* PHY Initialization taken from the Linux driver
	 */

	/* Prevent automatic loopback of data beeing transmitted by setting
	   ENC_PHCON2_HDLDIS */
	phyWrite(PHY_REG_PHCON2, (1<<8));

	/* LEDs configuration
	 * LEDA: LACFG = 0100 -> display link status
	 * LEDB: LBCFG = 0111 -> display TX & RX activity
	 * STRCH = 1 -> LED pulses
	 */
	phyWrite(PHY_REG_PHLCON, 0x0472);

	/* Reset PDPXMD-bit => half duplex */
	phyWrite(PHY_REG_PHCON1, 0);

	/*
	 * Receive settings
	 */

#ifdef CONFIG_USE_IRQ
	/* enable interrupts */
	m_nic_bfs (CTL_REG_EIE, ENC_EIE_PKTIE);
	m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXIE);
	m_nic_bfs (CTL_REG_EIE, ENC_EIE_RXERIE);
	m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXERIE);
	m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
#endif
}

/*****************************************************************************
 *
 * Description:
 *    Read PHY registers.
 *
 *    NOTE! This function will change to Bank 2.
 *
 * Params:
 *    [in] addr address of the register to read
 *
 * Returns:
 *    The value in the register
 */
static unsigned short phyRead (unsigned char addr)
{
	unsigned short ret = 0;

	/* move to bank 2 */
	m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
	m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);

	/* write address to MIREGADR */
	m_nic_write (CTL_REG_MIREGADR, addr);

	/* set MICMD.MIIRD */
	m_nic_write (CTL_REG_MICMD, ENC_MICMD_MIIRD);

	/* taken from the Linux driver */
	/* move to bank 3 */
	m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
	m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);

	/* poll MISTAT.BUSY bit until operation is complete */
	while ((m_nic_read (CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
		static int cnt = 0;

		if (cnt++ >= 1000) {
			/* GJ - this seems extremely dangerous! */
			/* printf("#"); */
			cnt = 0;
		}
	}

	/* taken from the Linux driver */
	/* move to bank 2 */
	m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
	m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);

	/* clear MICMD.MIIRD */
	m_nic_write (CTL_REG_MICMD, 0);

	ret = (m_nic_read (CTL_REG_MIRDH) << 8);
	ret |= (m_nic_read (CTL_REG_MIRDL) & 0xFF);

	return ret;
}

/*****************************************************************************
 *
 * Taken from the Linux driver.
 * Description:
 * Write PHY registers.
 *
 * NOTE! This function will change to Bank 3.
 *
 * Params:
 * [in] addr address of the register to write to
 * [in] data to be written
 *
 * Returns:
 *    None
 */
static void phyWrite(unsigned char addr, unsigned short data)
{
	/* move to bank 2 */
	m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
	m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);

	/* write address to MIREGADR */
	m_nic_write(CTL_REG_MIREGADR, addr);

	m_nic_write(CTL_REG_MIWRL, data & 0xff);
	m_nic_write(CTL_REG_MIWRH, data >> 8);

	/* move to bank 3 */
	m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
	m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);

	/* poll MISTAT.BUSY bit until operation is complete */
	while((m_nic_read(CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
		static int cnt = 0;

		if(cnt++ >= 1000) {
			cnt = 0;
		}
	}
}

#endif /* CONFIG_ENC28J60 */