Age | Commit message (Collapse) | Author |
|
Added the marker file containing the MD5SUMs for the initial drop of
0.11.3 firmware with ARMLT modifications.
This file was generated using this command:
$ find . -name "*" -type f | grep -v -e .git -e juno-0.11.3-linaro1 | sort | xargs md5sum > juno-0.11.3-linaro1
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Built from this commit [1]:
e7304a1 2015-05-07 vexpress64: fvp: add DRAM configuration [Ryan Harkin]
And combined with the unmodified ARM Trusted Firmware binaries from the
0.11.3 release.
The default config matches the config in this repo at this point, with
the kernel stored in NOR flash as "norkern", the device tree as
"board.dtb" and the initrd as "ramdisk.img".
The user should write the contents of this repo to their board's uSD
card, copy over their Image, juno*.dtb files and, for Android images.
The ramdisk.img from the boot.tar.bz2 file must first be wrapped in a
u-boot header to make a uInitrd, eg:
mkimage -A arm64 -O linux -T ramdisk -n ramdisk -C none -a 0x84000000 -e 0 -n "BusyBox ramdisk" -d ramdisk.img uInitrd
Then copy uInitrd to SOFTWARE/ramdisk.img.
Rebooting the board should then allow the user to boot straight into
their image stored on the USB stick.
[1] https://git.linaro.org/landing-teams/working/arm/u-boot.git/shortlog/e7304a10325ea3e05b609f2a3b3896b9c666f1bf
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Built from this commit [1]:
2cf85ef 2015-05-15 HACK: Treat ASCII DEL (0x7f) as backspace [Ryan Harkin]
And combined with the unmodified ARM Trusted Firmware binaries from the
0.11.3 release.
The default config matches the config in this repo at this point, with
the kernel stored in NOR flash as "norkern", the device tree as
"board.dtb" and the initrd as "ramdisk.img".
The user should write the contents of this repo to their board's uSD
card, copy over their Image, juno*.dtb files and, for Android images,
the ramdisk.img from the boot.tar.bz2 file.
Rebooting the board should then allow the user to boot straight into
their image stored on the USB stick.
[1] https://git.linaro.org/landing-teams/working/arm/edk2.git/shortlog/2cf85ef817b79cccf3767682eb10e7ad616f148e
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Add the bl30.bin SCP ROM taken from the 0.11.3 board recovery image from
ARM.
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Instead of renaming the kernel in the filesystem to norkern, leave it as
Image and set the name stored in NOR as "norkern".
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
images.txt allows files to be saved into NOR flash with a different name
from the filename.
So for the DTB files, I rename juno.dtb or juno-r1.dtb in NOR flash as
board.dtb.
This means that the UEFI config for both Juno R0 and R1 can be the same.
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Some users were having problems fitting larger kernels into our NOR
Flash layout.
The larger kernel was overlapping with the .dtb files, so I have moved
them up in NOR Flash to make more space for the kernel.
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Adding a dummy uInitrd ramdisk to NOR flash images.
The dummy ramdisk image can be passed to the kernel for systems that
don't boot using a ramdisk, but are booting using a bootloader that is
configured to expect a ramdisk by default.
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
The upstream UEFI code is broken when TFTP booting an EFI stubbed kernel
because UEFI assumes that it can boot the kernel using the EFI stub,
however, the EFI stub is unable to TFTP down the DTB or initrd files.
So, to get it to work, we have to allow the user to be able to tell UEFI
that they don't want to boot the kernel as an EFI application, and
therefore allow the DTB and initrd to be passed in explicitly from UEFI
config.
I build this from update with an upstream UEFI pls one patch:
ac8deed 2015-01-27 RMH: remove detection of EFI stub [Ryan Harkin]
c026931 2015-01-12 MdeModulePkg/PartitionDxe: Fixed El Torito support
For reference, the patch looks like this:
commit ac8deed8c95093b478bddd6a2cc377f94963a736
Author: Ryan Harkin <ryan.harkin@linaro.org>
Date: Tue Jan 27 18:53:28 2015 +0000
RMH: remove detection of EFI stub
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
---
ArmPlatformPkg/Bds/BootOptionSupport.c | 34
----------------------------------
1 file changed, 34 deletions(-)
diff --git a/ArmPlatformPkg/Bds/BootOptionSupport.c
b/ArmPlatformPkg/Bds/BootOptionSupport.c
index 974f220..a51d908 100644
--- a/ArmPlatformPkg/Bds/BootOptionSupport.c
+++ b/ArmPlatformPkg/Bds/BootOptionSupport.c
@@ -227,11 +227,6 @@ BootDeviceGetType (
CHAR16* FileName;
EFI_DEVICE_PATH* PrevDevicePathNode;
EFI_DEVICE_PATH* DevicePathNode;
- EFI_PHYSICAL_ADDRESS Image;
- UINTN FileSize;
- EFI_IMAGE_DOS_HEADER* DosHeader;
- UINTN PeCoffHeaderOffset;
- EFI_IMAGE_NT_HEADERS32* NtHeader;
//
// Check if the last node of the device path is a FilePath node
@@ -261,41 +256,12 @@ BootDeviceGetType (
} else if (HasFilePathEfiExtension(FileName)) {
IsEfiApp = TRUE;
} else {
- // Check if the file exist
- Status = BdsLoadImage (DevicePath, AllocateAnyPages, &Image,
&FileSize);
- if (!EFI_ERROR (Status)) {
-
- DosHeader = (EFI_IMAGE_DOS_HEADER *)(UINTN) Image;
- if (DosHeader->e_magic == EFI_IMAGE_DOS_SIGNATURE) {
- //
- // DOS image header is present,
- // so read the PE header after the DOS image header.
- //
- PeCoffHeaderOffset = DosHeader->e_lfanew;
- } else {
- PeCoffHeaderOffset = 0;
- }
-
- //
- // Check PE/COFF image.
- //
- NtHeader = (EFI_IMAGE_NT_HEADERS32 *)(UINTN) (Image +
PeCoffHeaderOffset);
- if (NtHeader->Signature != EFI_IMAGE_NT_SIGNATURE) {
- IsEfiApp = FALSE;
- } else {
- IsEfiApp = TRUE;
- }
-
- // Free memory
- gBS->FreePages (Image, EFI_SIZE_TO_PAGES(FileSize));
- } else {
// If we did not manage to open it then ask for the type
Print(L"Is an EFI Application? ");
Status = GetHIInputBoolean (&IsEfiApp);
if (EFI_ERROR(Status)) {
return EFI_ABORTED;
}
- }
}
if (IsEfiApp) {
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Some users were having problems fitting larger kernels into our NOR
Flash layout.
The larger kernel was overlapping with the juno.dtb, so I have moved
juno.dtb up in NOR Flash to make more space for the kernel.
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
In the move to EFI stubbed kernels, we don't want the NOR Image to be
found by accident if there is not valid Image file on the test disk.
This is due to the way EFI Shell works: it will search all valid boot
devices for the file it is attempting to boot.
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Firmware 0.9.2 starts to list the USB FAT partitions at the start of the
list.
So option 4 for "boot" will become option 1 and option 5 for "testboot"
will become option 2.
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
This file is used by LAVA to control the Juno boot sequence.
Currently, it works with board_recovery_image_0.8.*.zip and will have to
be updated to work with version 0.9.2 or later.
This file was taken from:
http://git.linaro.org/git-ro/lava/lava-dispatcher.git
At this commit:
commit 1c8dac1dc2ae2144561ebadc752c7b0dd7a6783a
Author: Dave Pigott <dave.pigott@linaro.org>
Date: Mon Oct 13 12:47:50 2014 +0100
Correct the sdcard and userdata partitions
Change-Id: I998c23632711e141b54601fa19229604608e4b6b
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|
|
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
|