diff options
Diffstat (limited to 'ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s')
9 files changed, 1116 insertions, 0 deletions
diff --git a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/ArmVExpressLib.inf b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/ArmVExpressLib.inf new file mode 100644 index 000000000..de141a86b --- /dev/null +++ b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/ArmVExpressLib.inf @@ -0,0 +1,54 @@ +#/* @file +# Copyright (c) 2011, ARM Limited. All rights reserved. +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +#*/ + +[Defines] + INF_VERSION = 0x00010005 + BASE_NAME = CTA5sArmVExpressLib + FILE_GUID = b16c63a0-f417-11df-b3af-0002a5d5c51b + MODULE_TYPE = BASE + VERSION_STRING = 1.0 + LIBRARY_CLASS = ArmPlatformLib + +[Packages] + MdePkg/MdePkg.dec + MdeModulePkg/MdeModulePkg.dec + EmbeddedPkg/EmbeddedPkg.dec + ArmPkg/ArmPkg.dec + ArmPlatformPkg/ArmPlatformPkg.dec + +[LibraryClasses] + IoLib + ArmLib + PL341DmcLib + PL301AxiLib + L2X0CacheLib + SerialPortLib + +[Sources.common] + CTA5s.c + CTA5sMem.c + CTA5Helper.asm | RVCT + CTA5Helper.S | GCC + +[FeaturePcd] + gEmbeddedTokenSpaceGuid.PcdCacheEnable + gArmPlatformTokenSpaceGuid.PcdNorFlashRemapping + +[FixedPcd] + gArmPlatformTokenSpaceGuid.PcdCoreCount + gArmTokenSpaceGuid.PcdSystemMemoryBase + gArmTokenSpaceGuid.PcdSystemMemorySize + gArmTokenSpaceGuid.PcdFvBaseAddress + + gArmTokenSpaceGuid.PcdArmPrimaryCoreMask + gArmTokenSpaceGuid.PcdArmPrimaryCore diff --git a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/ArmVExpressSecLib.inf b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/ArmVExpressSecLib.inf new file mode 100644 index 000000000..f0521b95c --- /dev/null +++ b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/ArmVExpressSecLib.inf @@ -0,0 +1,53 @@ +#/* @file +# Copyright (c) 2011, ARM Limited. All rights reserved. +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +#*/ + +[Defines] + INF_VERSION = 0x00010005 + BASE_NAME = CTA5sArmVExpressLib + FILE_GUID = b16c63a0-f417-11df-b3af-0002a5d5c51b + MODULE_TYPE = BASE + VERSION_STRING = 1.0 + LIBRARY_CLASS = ArmPlatformLib + +[Packages] + MdePkg/MdePkg.dec + MdeModulePkg/MdeModulePkg.dec + EmbeddedPkg/EmbeddedPkg.dec + ArmPkg/ArmPkg.dec + ArmPlatformPkg/ArmPlatformPkg.dec + +[LibraryClasses] + ArmLib + ArmPlatformSysConfigLib + IoLib + L2X0CacheLib + PL301AxiLib + PL341DmcLib + PL35xSmcLib + SerialPortLib + +[Sources.common] + CTA5sSec.c + CTA5s.c + CTA5sBoot.asm | RVCT + CTA5sBoot.S | GCC + +[FeaturePcd] + gEmbeddedTokenSpaceGuid.PcdCacheEnable + gArmPlatformTokenSpaceGuid.PcdNorFlashRemapping + +[FixedPcd] + gArmTokenSpaceGuid.PcdFvBaseAddress + + gArmTokenSpaceGuid.PcdArmPrimaryCoreMask + gArmTokenSpaceGuid.PcdArmPrimaryCore diff --git a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5Helper.S b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5Helper.S new file mode 100644 index 000000000..5891eb4b6 --- /dev/null +++ b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5Helper.S @@ -0,0 +1,62 @@ +# +# Copyright (c) 2011-2013, ARM Limited. All rights reserved. +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +# + +#include <AsmMacroIoLib.h> +#include <Library/ArmLib.h> + +.text +.align 2 + +GCC_ASM_EXPORT(ArmPlatformPeiBootAction) +GCC_ASM_EXPORT(ArmPlatformIsPrimaryCore) +GCC_ASM_EXPORT(ArmPlatformGetCorePosition) + +GCC_ASM_IMPORT(_gPcd_FixedAtBuild_PcdArmPrimaryCore) +GCC_ASM_IMPORT(_gPcd_FixedAtBuild_PcdArmPrimaryCoreMask) + +//UINTN +//ArmPlatformGetPrimaryCoreMpId ( +// VOID +// ); +ASM_PFX(ArmPlatformGetPrimaryCoreMpId): + LoadConstantToReg (_gPcd_FixedAtBuild_PcdArmPrimaryCoreMask, r0) + ldr r0, [r0] + bx lr + +//UINTN +//ArmPlatformIsPrimaryCore ( +// IN UINTN MpId +// ); +ASM_PFX(ArmPlatformIsPrimaryCore): + LoadConstantToReg (_gPcd_FixedAtBuild_PcdArmPrimaryCoreMask, r1) + ldr r1, [r1] + and r0, r0, r1 + LoadConstantToReg (_gPcd_FixedAtBuild_PcdArmPrimaryCore, r1) + ldr r1, [r1] + cmp r0, r1 + moveq r0, #1 + movne r0, #0 + bx lr + +//UINTN +//ArmPlatformGetCorePosition ( +// IN UINTN MpId +// ); +ASM_PFX(ArmPlatformGetCorePosition): + and r0, r0, #ARM_CORE_MASK + bx lr + +ASM_PFX(ArmPlatformPeiBootAction): + bx lr + +ASM_FUNCTION_REMOVE_IF_UNREFERENCED diff --git a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5Helper.asm b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5Helper.asm new file mode 100644 index 000000000..9f4892b04 --- /dev/null +++ b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5Helper.asm @@ -0,0 +1,70 @@ +// +// Copyright (c) 2013, ARM Limited. All rights reserved. +// +// This program and the accompanying materials +// are licensed and made available under the terms and conditions of the BSD License +// which accompanies this distribution. The full text of the license may be found at +// http://opensource.org/licenses/bsd-license.php +// +// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +// +// + +#include <AsmMacroIoLib.h> +#include <Library/ArmLib.h> + +#include <AutoGen.h> + + INCLUDE AsmMacroIoLib.inc + + EXPORT ArmPlatformPeiBootAction + EXPORT ArmPlatformIsPrimaryCore + EXPORT ArmPlatformGetPrimaryCoreMpId + EXPORT ArmPlatformGetCorePosition + + IMPORT _gPcd_FixedAtBuild_PcdArmPrimaryCore + IMPORT _gPcd_FixedAtBuild_PcdArmPrimaryCoreMask + + AREA CTA9x4Helper, CODE, READONLY + +//UINTN +//ArmPlatformGetPrimaryCoreMpId ( +// VOID +// ); +ArmPlatformGetPrimaryCoreMpId FUNCTION + LoadConstantToReg (_gPcd_FixedAtBuild_PcdArmPrimaryCoreMask, r0) + ldr r0, [r0] + bx lr + ENDFUNC + +//UINTN +//ArmPlatformIsPrimaryCore ( +// IN UINTN MpId +// ); +ArmPlatformIsPrimaryCore FUNCTION + LoadConstantToReg (_gPcd_FixedAtBuild_PcdArmPrimaryCoreMask, r1) + ldr r1, [r1] + and r0, r0, r1 + LoadConstantToReg (_gPcd_FixedAtBuild_PcdArmPrimaryCore, r1) + ldr r1, [r1] + cmp r0, r1 + moveq r0, #1 + movne r0, #0 + bx lr + ENDFUNC + +//UINTN +//ArmPlatformGetCorePosition ( +// IN UINTN MpId +// ); +ArmPlatformGetCorePosition FUNCTION + and r0, r0, #ARM_CORE_MASK + bx lr + ENDFUNC + +ArmPlatformPeiBootAction FUNCTION + bx lr + ENDFUNC + + END diff --git a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5s.c b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5s.c new file mode 100644 index 000000000..ccf6fe0a6 --- /dev/null +++ b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5s.c @@ -0,0 +1,162 @@ +/** @file +* +* Copyright (c) 2011, ARM Limited. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#include <Library/IoLib.h> +#include <Library/ArmPlatformLib.h> +#include <Library/DebugLib.h> +#include <Library/PcdLib.h> +#include <Library/SerialPortLib.h> + +#include <Drivers/PL341Dmc.h> +#include <Drivers/PL301Axi.h> +#include <Drivers/SP804Timer.h> + +#include <Ppi/ArmMpCoreInfo.h> + +#include <ArmPlatform.h> + +#define SerialPrint(txt) SerialPortWrite ((UINT8*)(txt), AsciiStrLen(txt)+1); + +ARM_CORE_INFO mVersatileExpressMpCoreInfoCTA5s[] = { + { + // Cluster 0, Core 0 + 0x0, 0x0, + + // MP Core MailBox Set/Get/Clear Addresses and Clear Value + (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG, + (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG, + (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG, + (UINT64)0xFFFFFFFF + }, + { + // Cluster 0, Core 1 + 0x0, 0x1, + + // MP Core MailBox Set/Get/Clear Addresses and Clear Value + (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG, + (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG, + (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG, + (UINT64)0xFFFFFFFF + }, +}; + +/** + Return the current Boot Mode + + This function returns the boot reason on the platform + + @return Return the current Boot Mode of the platform + +**/ +EFI_BOOT_MODE +ArmPlatformGetBootMode ( + VOID + ) +{ + if (MmioRead32(ARM_VE_SYS_FLAGS_NV_REG) == 0) { + return BOOT_WITH_FULL_CONFIGURATION; + } else { + return BOOT_ON_S2_RESUME; + } +} + +/** + Initialize controllers that must setup in the normal world + + This function is called by the ArmPlatformPkg/PrePi or ArmPlatformPkg/PlatformPei + in the PEI phase. + +**/ +RETURN_STATUS +ArmPlatformInitialize ( + IN UINTN MpId + ) +{ + if (!ArmPlatformIsPrimaryCore (MpId)) { + return RETURN_SUCCESS; + } + + // Configure periodic timer (TIMER0) for 1MHz operation + MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER0_TIMCLK); + // Configure 1MHz clock + MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER1_TIMCLK); + // configure SP810 to use 1MHz clock and disable + MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER2_EN, SP810_SYS_CTRL_TIMER2_TIMCLK); + // Configure SP810 to use 1MHz clock and disable + MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER3_EN, SP810_SYS_CTRL_TIMER3_TIMCLK); + + return RETURN_SUCCESS; +} + +/** + Initialize the system (or sometimes called permanent) memory + + This memory is generally represented by the DRAM. + +**/ +VOID +ArmPlatformInitializeSystemMemory ( + VOID + ) +{ + // Memory is initialised in CTA5sBoot.S +} + +EFI_STATUS +PrePeiCoreGetMpCoreInfo ( + OUT UINTN *CoreCount, + OUT ARM_CORE_INFO **ArmCoreTable + ) +{ + *CoreCount = sizeof(mVersatileExpressMpCoreInfoCTA5s) / sizeof(ARM_CORE_INFO); + *ArmCoreTable = mVersatileExpressMpCoreInfoCTA5s; + + return EFI_SUCCESS; +} + +// Needs to be declared in the file. Otherwise gArmMpCoreInfoPpiGuid is undefined in the contect of PrePeiCore +EFI_GUID mArmMpCoreInfoPpiGuid = ARM_MP_CORE_INFO_PPI_GUID; +ARM_MP_CORE_INFO_PPI mMpCoreInfoPpi = { PrePeiCoreGetMpCoreInfo }; + +EFI_PEI_PPI_DESCRIPTOR gPlatformPpiTable[] = { + { + EFI_PEI_PPI_DESCRIPTOR_PPI, + &mArmMpCoreInfoPpiGuid, + &mMpCoreInfoPpi + } +}; + +VOID +ArmPlatformGetPlatformPpiList ( + OUT UINTN *PpiListSize, + OUT EFI_PEI_PPI_DESCRIPTOR **PpiList + ) +{ + *PpiListSize = sizeof(gPlatformPpiTable); + *PpiList = gPlatformPpiTable; +} + +/** + Initialize the Secure peripherals and memory regions + + If Trustzone is supported by your platform then this function makes the required initialization + of the secure peripherals and memory regions. + +**/ +VOID +ArmPlatformSecTrustzoneInit ( + IN UINTN MpId + ) +{ +} diff --git a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5sBoot.S b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5sBoot.S new file mode 100644 index 000000000..62750bde2 --- /dev/null +++ b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5sBoot.S @@ -0,0 +1,386 @@ +// +// Copyright (c) 2011, ARM Limited. All rights reserved. +// +// This program and the accompanying materials +// are licensed and made available under the terms and conditions of the BSD License +// which accompanies this distribution. The full text of the license may be found at +// http://opensource.org/licenses/bsd-license.php +// +// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +// +// + +#include <AsmMacroIoLib.h> +#include <Base.h> +#include <Library/ArmPlatformLib.h> +#include <Drivers/PL35xSmc.h> +#include <Drivers/PL341Dmc.h> +#include <ArmPlatform.h> +#include <AutoGen.h> + +.text +.align 3 + +GCC_ASM_EXPORT(ArmPlatformSecBootAction) +GCC_ASM_EXPORT(ArmPlatformInitializeBootMemory) +GCC_ASM_EXPORT(ArmPlatformSecBootMemoryInit) + +/** + Call at the beginning of the platform boot up + + This function allows the firmware platform to do extra actions at the early + stage of the platform power up. + + Note: This function must be implemented in assembler as there is no stack set up yet + +**/ +ASM_PFX(ArmPlatformSecBootAction): + bx lr + +/** + Initialize the memory where the initial stacks will reside + + This memory can contain the initial stacks (Secure and Secure Monitor stacks). + In some platform, this region is already initialized and the implementation of this function can + do nothing. This memory can also represent the Secure RAM. + This function is called before the satck has been set up. Its implementation must ensure the stack + pointer is not used (probably required to use assembly language) + +**/ +ASM_PFX(ArmPlatformInitializeBootMemory): + bx lr + + +/** + Initialize the memory where the initial stacks will reside + + This memory can contain the initial stacks (Secure and Secure Monitor stacks). + In some platform, this region is already initialized and the implementation of this function can + do nothing. This memory can also represent the Secure RAM. + This function is called before the satck has been set up. Its implementation must ensure the stack + pointer is not used (probably required to use assembly language) + +**/ +ASM_PFX(ArmPlatformSecBootMemoryInit): + mov r8, lr + bl smc_init + bl dmc_init + bx r8 + + +/** + Initialise the Static Memory Controller +**/ +smc_init: + + // + // Disable loop buffer for A15 + // + MRC p15, 0, r2, c0, c0, 0 + MOV r1, r2, lsr #4 + LDR r0, =0xFFF + AND r1, r1, r0 + LDR r0, =0xC0F // See if A15 + CMP r1, r0 + BNE smc_init2 // Go if not + + MRC p15, 0, r1, c1, c0, 1 // Read Aux Ctrl Reg + ORR r1, r1, #(1 << 1) // Set Bit 1 + MCR p15, 0, r1, c1, c0, 1 // and write it back + +smc_init2: + + LDR r0, = ARM_VE_SMC_CTRL_BASE + LDR r2, = ARM_VE_SMB_PERIPH_BASE + + // CS0 - NOR0 + LDR r1, = 0x0002393A + STR r1, [r0, #PL350_SMC_SET_CYCLES_OFFSET] + LDR r1, = 0x00000AAA + STR r1, [r0, #PL350_SMC_SET_OPMODE_OFFSET] + LDR r1, = 0x00400000 + STR r1, [r0, #PL350_SMC_DIRECT_CMD_OFFSET] + + // CS1 - PSRAM + LDR r1, = 0x00027158 + STR r1, [r0, #PL350_SMC_SET_CYCLES_OFFSET] + LDR r1, = 0x00000802 + STR r1, [r0, #PL350_SMC_SET_OPMODE_OFFSET] + LDR r1, = 0x00C00000 + STR r1, [r0, #PL350_SMC_DIRECT_CMD_OFFSET] + + // CS2 - usb, ethernet and vram + LDR r1, = 0x000CD2AA + STR r1, [r0, #PL350_SMC_SET_CYCLES_OFFSET] + LDR r1, = 0x00000046 + STR r1, [r0, #PL350_SMC_SET_OPMODE_OFFSET] + LDR r1, = 0x01400000 + STR r1, [r0, #PL350_SMC_DIRECT_CMD_OFFSET] + + // CS3 - IOFPGA peripherals + LDR r1, = 0x00025156 + STR r1, [r0, #PL350_SMC_SET_CYCLES_OFFSET] + LDR r1, = 0x00000046 + STR r1, [r0, #PL350_SMC_SET_OPMODE_OFFSET] + LDR r1, = 0x01C00000 + STR r1, [r0, #PL350_SMC_DIRECT_CMD_OFFSET] + + // CS4 - NOR1 + LDR r1, = 0x0002393A + STR r1, [r0, #PL350_SMC_SET_CYCLES_OFFSET] + LDR r1, = 0x00000AAA + STR r1, [r0, #PL350_SMC_SET_OPMODE_OFFSET] + LDR r1, = 0x02400000 + STR r1, [r0, #PL350_SMC_DIRECT_CMD_OFFSET] + + // CS5 - unused + LDR r1, = 0x0002393A + STR r1, [r0, #PL350_SMC_SET_CYCLES_OFFSET] + LDR r1, = 0x00000AAA + STR r1, [r0, #PL350_SMC_SET_OPMODE_OFFSET] + LDR r1, = 0x02C00000 + STR r1, [r0, #PL350_SMC_DIRECT_CMD_OFFSET] + + // CS6 - unused + LDR r1, = 0x0002393A + STR r1, [r0, #PL350_SMC_SET_CYCLES_OFFSET] + LDR r1, = 0x00000AAA + STR r1, [r0, #PL350_SMC_SET_OPMODE_OFFSET] + LDR r1, = 0x03400000 + STR r1, [r0, #PL350_SMC_DIRECT_CMD_OFFSET] + + // CS7 - unused + LDR r1, = 0x0002393A + STR r1, [r0, #PL350_SMC_SET_CYCLES_OFFSET] + LDR r1, = 0x00000AAA + STR r1, [r0, #PL350_SMC_SET_OPMODE_OFFSET] + LDR r1, = 0x03C00000 + STR r1, [r0, #PL350_SMC_DIRECT_CMD_OFFSET] + + // Set refresh period + LDR r1, = 0x1 + STR r1, [r0, #0x20] + + LDR r1, = 0x1 + STR r1, [r0, #0x24] + + // page mode setup for VRAM + LDR r0, = 0x00FFFFFC + ADD r0, r0, r2 + + // read current state + LDR r1, [r0, #0] + LDR r1, [r0, #0] + LDR r1, = 0x00000000 + STR r1, [r0, #0] + LDR r1, [r0, #0] + + // enable page mode + LDR r1, [r0, #0] + LDR r1, [r0, #0] + LDR r1, = 0x00000000 + STR r1, [r0, #0] + LDR r1, = 0x00900090 + STR r1, [r0, #0] + + // confirm page mode enabled + LDR r1, [r0, #0] + LDR r1, [r0, #0] + LDR r1, = 0x00000000 + STR r1, [r0, #0] + LDR r1, [r0, #0] + + BX lr + // end of smc_init + + +/** + Initialise the PL341 Dynamic Memory Controller (DMC) + + On A15, the PHY needs to be locked before configuring the DMC. + After DMC config, the PHY needs to be trained +**/ +#define SCC_PHY_RESET_REG_OFFSET 0x04 + +dmc_init: + + LDR r0, = ARM_VE_DMC_BASE + LDR r1, = ARM_VE_BOARD_PERIPH_BASE + + // On entry:- + // r0 = base address of ssmc controller + // r1 = address of system registers + + // Initializes V2P_CA5 dynamic memory controller + + MOV r2, r1 + + // set config mode + MOV r1, #0x4 + STR r1, [r0, #DMC_COMMAND_REG] + + // initialise memory controlller + + // refresh period + LDR r1, =0x3D0 + STR r1, [r0, #DMC_REFRESH_PRD_REG] + + // cas latency + MOV r1, #0xA + STR r1, [r0, #DMC_CAS_LATENCY_REG] + + // write latency + MOV r1, #0x3 + STR r1, [r0, #DMC_WRITE_LATENCY_REG] + + // t_mrd + MOV r1, #0x2 + STR r1, [r0, #DMC_T_MRD_REG] + + // t_ras + MOV r1, #0x0C + STR r1, [r0, #DMC_T_RAS_REG] + + // t_rc + MOV r1, #0x0F + STR r1, [r0, #DMC_T_RC_REG] + + // t_rcd + LDR r1, =0x00000104 + STR r1, [r0,#DMC_T_RCD_REG] + + // t_rfc + LDR r1, =0x00001022 + STR r1, [r0, #DMC_T_RFC_REG] + + // t_rp + LDR r1, =0x00000104 + STR r1, [r0, #DMC_T_RP_REG] + + // t_rrd + MOV r1, #0x2 + STR r1, [r0, #DMC_T_RRD_REG] + + // t_wr + MOV r1, #0x4 + STR r1, [r0, #DMC_T_WR_REG] + + // t_wtr + MOV r1, #0x2 + STR r1, [r0, #DMC_T_WTR_REG] + + // t_xp + MOV r1, #0x2 + STR r1, [r0, #DMC_T_XP_REG] + + // t_xsr + MOV r1, #0xC8 + STR r1, [r0, #DMC_T_XSR_REG] + + // t_esr + MOV r1, #0x04 + STR r1, [r0, #DMC_T_ESR_REG] + + // t_faw + LDR r1, =0x00000407 + STR r1, [r0, #DMC_T_FAW_REG] + + // set memory config + LDR r1, =0x0001001A + STR r1, [r0, #DMC_MEMORY_CONFIG_REG] + + // set memory config 2 + LDR r1, =0x000000B0 + STR r1, [r0, #DMC_MEMORY_CFG2_REG] + + // initialise external memory chips + // set chip select for chip configuration + LDR r1, =0x000180C0 + STR r1, [r0, #DMC_CHIP_0_CFG_REG] + + // config memories + + // send nop + LDR r1, =0x000C0000 + STR r1, [r0, #DMC_DIRECT_CMD_REG] + + // delay + MOV r1, #0 +B1: LDR r3, [r0, #DMC_STATUS_REG] // read status register + ADD r1, r1, #1 + CMP r1, #10 + BLT B1 + + // pre-charge all + MOV r1, #0x0 + STR r1, [r0, #DMC_DIRECT_CMD_REG] + + // delay + MOV r1, #0 +B2: LDR r3, [r0, #DMC_STATUS_REG] // read status register + ADD r1, r1, #1 + CMP r1, #10 + BLT B2 + + // set extended mode register 2 + LDR r1, =0x000A8000 + STR r1, [r0, #DMC_DIRECT_CMD_REG] + + // set extended mode register 3 + MOV r1, #0x000B0000 + STR r1, [r0, #DMC_DIRECT_CMD_REG] + + // set extended mode register + LDR r1, =0x00094005 + STR r1, [r0, #DMC_DIRECT_CMD_REG] + + // set mode register -DLL reset + LDR r1, =0x00080552 + STR r1, [r0, #DMC_DIRECT_CMD_REG] + + // delay + MOV r1, #0 +B3: LDR r3, [r0, #DMC_STATUS_REG] // read status register + ADD r1, r1, #1 + CMP r1, #10 + BLT B3 + + // pre-charge all + MOV r1, #0x0 + STR r1, [r0, #DMC_DIRECT_CMD_REG] + + // auto-refresh + MOV r1, #0x00040000 + STR r1, [r0, #DMC_DIRECT_CMD_REG] + + // auto-refresh + MOV r1, #0x00040000 + STR r1, [r0, #DMC_DIRECT_CMD_REG] + + // set mode register + LDR r1, =0x00080452 + STR r1, [r0, #DMC_DIRECT_CMD_REG] + + // set extended mode register - Enable OCD defaults + LDR r1, =0x000943C5 + STR r1, [r0, #DMC_DIRECT_CMD_REG] + + // set extended mode register - OCD Exit + LDR r1, =0x00094047 + STR r1, [r0, #DMC_DIRECT_CMD_REG] + + //---------------------------------------- + // go command + MOV r1, #0x0 + STR r1, [r0, #DMC_COMMAND_REG] + + // wait for ready +B4: LDR r1, [r0,#DMC_STATUS_REG] + TST r1,#1 + BEQ B4 + +exit: + bx lr + // end of dmc_init + diff --git a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5sBoot.asm b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5sBoot.asm new file mode 100644 index 000000000..39d903378 --- /dev/null +++ b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5sBoot.asm @@ -0,0 +1,127 @@ +// +// Copyright (c) 2011, ARM Limited. All rights reserved. +// +// This program and the accompanying materials +// are licensed and made available under the terms and conditions of the BSD License +// which accompanies this distribution. The full text of the license may be found at +// http://opensource.org/licenses/bsd-license.php +// +// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +// +// + +#include <AsmMacroIoLib.h> +#include <Base.h> +#include <Library/ArmPlatformLib.h> +#include <Drivers/PL35xSmc.h> +#include <ArmPlatform.h> +#include <AutoGen.h> + + INCLUDE AsmMacroIoLib.inc + + EXPORT ArmPlatformSecBootAction + EXPORT ArmPlatformInitializeBootMemory + IMPORT PL35xSmcInitialize + + PRESERVE8 + AREA CTA5sBootMode, CODE, READONLY + +// +// For each Chip Select: ChipSelect / SetCycle / SetOpMode +// +VersatileExpressSmcConfiguration + // NOR Flash 0 + DCD PL350_SMC_DIRECT_CMD_ADDR_CS(0) + DCD PL350_SMC_SET_CYCLE_NAND_T_RC(0xA) :OR: PL350_SMC_SET_CYCLE_NAND_T_WC(0x3) :OR: PL350_SMC_SET_CYCLE_NAND_T_REA(0x1) :OR: PL350_SMC_SET_CYCLE_NAND_T_WP(0x7) :OR: PL350_SMC_SET_CYCLE_NAND_T_AR(0x1) + DCD PL350_SMC_SET_OPMODE_MEM_WIDTH_32 :OR: PL350_SMC_SET_OPMODE_SET_RD_BURST_LENGTH_CONT :OR: PL350_SMC_SET_OPMODE_SET_WR_BURST_LENGTH_CONT :OR: PL350_SMC_SET_OPMODE_SET_ADV + + // NOR Flash 1 + DCD PL350_SMC_DIRECT_CMD_ADDR_CS(4) + DCD PL350_SMC_SET_CYCLE_NAND_T_RC(0xA) :OR: PL350_SMC_SET_CYCLE_NAND_T_WC(0x3) :OR: PL350_SMC_SET_CYCLE_NAND_T_REA(0x1) :OR: PL350_SMC_SET_CYCLE_NAND_T_WP(0x7) :OR: PL350_SMC_SET_CYCLE_NAND_T_AR(0x1) + DCD PL350_SMC_SET_OPMODE_MEM_WIDTH_32 :OR: PL350_SMC_SET_OPMODE_SET_RD_BURST_LENGTH_CONT :OR: PL350_SMC_SET_OPMODE_SET_WR_BURST_LENGTH_CONT :OR: PL350_SMC_SET_OPMODE_SET_ADV + + // SRAM + DCD PL350_SMC_DIRECT_CMD_ADDR_CS(2) + DCD PL350_SMC_SET_CYCLE_SRAM_T_RC(0x8) :OR: PL350_SMC_SET_CYCLE_SRAM_T_WC(0x5) :OR: PL350_SMC_SET_CYCLE_SRAM_T_CEOE(0x1) :OR: PL350_SMC_SET_CYCLE_SRAM_T_WP(0x6) :OR: PL350_SMC_SET_CYCLE_SRAM_T_PC(0x1) :OR: PL350_SMC_SET_CYCLE_SRAM_T_TR(0x1) + DCD PL350_SMC_SET_OPMODE_MEM_WIDTH_32 :OR: PL350_SMC_SET_OPMODE_SET_ADV + + // Usb/Eth/VRAM + DCD PL350_SMC_DIRECT_CMD_ADDR_CS(3) + DCD PL350_SMC_SET_CYCLE_SRAM_T_RC(0xA) :OR: PL350_SMC_SET_CYCLE_SRAM_T_WC(0xA) :OR: PL350_SMC_SET_CYCLE_SRAM_T_CEOE(0x2) :OR: PL350_SMC_SET_CYCLE_SRAM_T_WP(0x2) :OR: PL350_SMC_SET_CYCLE_SRAM_T_PC(0x3) :OR: PL350_SMC_SET_CYCLE_SRAM_T_TR(0x6) + DCD PL350_SMC_SET_OPMODE_MEM_WIDTH_32 :OR: PL350_SMC_SET_OPMODE_SET_RD_SYNC :OR: PL350_SMC_SET_OPMODE_SET_WR_SYNC + + // Memory Mapped Peripherals + DCD PL350_SMC_DIRECT_CMD_ADDR_CS(7) + DCD PL350_SMC_SET_CYCLE_SRAM_T_RC(0x6) :OR: PL350_SMC_SET_CYCLE_SRAM_T_WC(0x5) :OR: PL350_SMC_SET_CYCLE_SRAM_T_CEOE(0x1) :OR: PL350_SMC_SET_CYCLE_SRAM_T_WP(0x2) :OR: PL350_SMC_SET_CYCLE_SRAM_T_PC(0x1) :OR: PL350_SMC_SET_CYCLE_SRAM_T_TR(0x1) + DCD PL350_SMC_SET_OPMODE_MEM_WIDTH_32 :OR: PL350_SMC_SET_OPMODE_SET_RD_SYNC :OR: PL350_SMC_SET_OPMODE_SET_WR_SYNC + + // VRAM + DCD PL350_SMC_DIRECT_CMD_ADDR_CS(1) + DCD 0x00049249 + DCD PL350_SMC_SET_OPMODE_MEM_WIDTH_32 :OR: PL350_SMC_SET_OPMODE_SET_RD_SYNC :OR: PL350_SMC_SET_OPMODE_SET_WR_SYNC +VersatileExpressSmcConfigurationEnd + +/** + Call at the beginning of the platform boot up + + This function allows the firmware platform to do extra actions at the early + stage of the platform power up. + + Note: This function must be implemented in assembler as there is no stack set up yet + +**/ +ArmPlatformSecBootAction + bx lr + +/** + Initialize the memory where the initial stacks will reside + + This memory can contain the initial stacks (Secure and Secure Monitor stacks). + In some platform, this region is already initialized and the implementation of this function can + do nothing. This memory can also represent the Secure RAM. + This function is called before the satck has been set up. Its implementation must ensure the stack + pointer is not used (probably required to use assembly language) + +**/ +ArmPlatformInitializeBootMemory + mov r5, lr + + // + // Initialize PL354 SMC + // + LoadConstantToReg (ARM_VE_SMC_CTRL_BASE, r1) + ldr r2, =VersatileExpressSmcConfiguration + ldr r3, =VersatileExpressSmcConfigurationEnd + blx PL35xSmcInitialize + + // + // Page mode setup for VRAM + // + LoadConstantToReg (VRAM_MOTHERBOARD_BASE, r2) + + // Read current state + ldr r0, [r2, #0] + ldr r0, [r2, #0] + ldr r0, = 0x00000000 + str r0, [r2, #0] + ldr r0, [r2, #0] + + // Enable page mode + ldr r0, [r2, #0] + ldr r0, [r2, #0] + ldr r0, = 0x00000000 + str r0, [r2, #0] + ldr r0, = 0x00900090 + str r0, [r2, #0] + + // Confirm page mode enabled + ldr r0, [r2, #0] + ldr r0, [r2, #0] + ldr r0, = 0x00000000 + str r0, [r2, #0] + ldr r0, [r2, #0] + +ryan doesn't want this to happen + + bx r5 diff --git a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5sMem.c b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5sMem.c new file mode 100644 index 000000000..eee3c3c9f --- /dev/null +++ b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5sMem.c @@ -0,0 +1,128 @@ +/** @file +* +* Copyright (c) 2011, ARM Limited. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#include <Library/ArmPlatformLib.h> +#include <Library/DebugLib.h> +#include <Library/PcdLib.h> +#include <Library/IoLib.h> +#include <Library/MemoryAllocationLib.h> + +#include <ArmPlatform.h> + +// Number of Virtual Memory Map Descriptors without a Logic Tile +#define MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS 6 + +// DDR attributes +#define DDR_ATTRIBUTES_CACHED ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK +#define DDR_ATTRIBUTES_UNCACHED ARM_MEMORY_REGION_ATTRIBUTE_UNCACHED_UNBUFFERED + +/** + Return the Virtual Memory Map of your platform + + This Virtual Memory Map is used by MemoryInitPei Module to initialize the MMU on your platform. + + @param[out] VirtualMemoryMap Array of ARM_MEMORY_REGION_DESCRIPTOR describing a Physical-to- + Virtual Memory mapping. This array must be ended by a zero-filled + entry + +**/ +VOID +ArmPlatformGetVirtualMemoryMap ( + IN ARM_MEMORY_REGION_DESCRIPTOR** VirtualMemoryMap + ) +{ + ARM_MEMORY_REGION_ATTRIBUTES CacheAttributes; + UINTN Index = 0; + ARM_MEMORY_REGION_DESCRIPTOR *VirtualMemoryTable; + + ASSERT(VirtualMemoryMap != NULL); + + VirtualMemoryTable = (ARM_MEMORY_REGION_DESCRIPTOR*)AllocatePages(EFI_SIZE_TO_PAGES (sizeof(ARM_MEMORY_REGION_DESCRIPTOR) * MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS)); + if (VirtualMemoryTable == NULL) { + return; + } + + if (FeaturePcdGet(PcdCacheEnable) == TRUE) { + CacheAttributes = DDR_ATTRIBUTES_CACHED; + } else { + CacheAttributes = DDR_ATTRIBUTES_UNCACHED; + } + + // ReMap (Either NOR Flash or DRAM) + VirtualMemoryTable[Index].PhysicalBase = ARM_VE_REMAP_BASE; + VirtualMemoryTable[Index].VirtualBase = ARM_VE_REMAP_BASE; + VirtualMemoryTable[Index].Length = ARM_VE_REMAP_SZ; + + if (FeaturePcdGet(PcdNorFlashRemapping) == FALSE) { + // Map the NOR Flash as Secure Memory + if (FeaturePcdGet(PcdCacheEnable) == TRUE) { + VirtualMemoryTable[Index].Attributes = DDR_ATTRIBUTES_CACHED; + } else { + VirtualMemoryTable[Index].Attributes = DDR_ATTRIBUTES_UNCACHED; + } + } else { + // DRAM mapping + VirtualMemoryTable[Index].Attributes = CacheAttributes; + } + + // DDR + VirtualMemoryTable[++Index].PhysicalBase = ARM_VE_DRAM_BASE; + VirtualMemoryTable[Index].VirtualBase = ARM_VE_DRAM_BASE; + VirtualMemoryTable[Index].Length = ARM_VE_DRAM_SZ; + VirtualMemoryTable[Index].Attributes = CacheAttributes; + + // SMC CS7 + VirtualMemoryTable[++Index].PhysicalBase = ARM_VE_ON_CHIP_PERIPH_BASE; + VirtualMemoryTable[Index].VirtualBase = ARM_VE_ON_CHIP_PERIPH_BASE; + VirtualMemoryTable[Index].Length = ARM_VE_ON_CHIP_PERIPH_SZ; + VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE; + + // SMB CS0-CS1 - NOR Flash 1 & 2 + VirtualMemoryTable[++Index].PhysicalBase = ARM_VE_SMB_NOR0_BASE; + VirtualMemoryTable[Index].VirtualBase = ARM_VE_SMB_NOR0_BASE; + VirtualMemoryTable[Index].Length = ARM_VE_SMB_NOR0_SZ + ARM_VE_SMB_NOR1_SZ; + VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE; + + // SMB CS2 - SRAM + VirtualMemoryTable[++Index].PhysicalBase = ARM_VE_SMB_SRAM_BASE; + VirtualMemoryTable[Index].VirtualBase = ARM_VE_SMB_SRAM_BASE; + VirtualMemoryTable[Index].Length = ARM_VE_SMB_SRAM_SZ; + VirtualMemoryTable[Index].Attributes = CacheAttributes; + + // SMB CS3-CS6 - Motherboard Peripherals + VirtualMemoryTable[++Index].PhysicalBase = ARM_VE_SMB_PERIPH_BASE; + VirtualMemoryTable[Index].VirtualBase = ARM_VE_SMB_PERIPH_BASE; + VirtualMemoryTable[Index].Length = 2 * ARM_VE_SMB_PERIPH_SZ; + VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE; + + // If a Logic Tile is connected to The ARM Versatile Express Motherboard + if (MmioRead32(ARM_VE_SYS_PROCID1_REG) != 0) { + VirtualMemoryTable[++Index].PhysicalBase = ARM_VE_EXT_AXI_BASE; + VirtualMemoryTable[Index].VirtualBase = ARM_VE_EXT_AXI_BASE; + VirtualMemoryTable[Index].Length = ARM_VE_EXT_AXI_SZ; + VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE; + + ASSERT((Index + 1) == (MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS + 1)); + } else { + ASSERT((Index + 1) == MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS); + } + + // End of Table + VirtualMemoryTable[++Index].PhysicalBase = 0; + VirtualMemoryTable[Index].VirtualBase = 0; + VirtualMemoryTable[Index].Length = 0; + VirtualMemoryTable[Index].Attributes = (ARM_MEMORY_REGION_ATTRIBUTES)0; + + *VirtualMemoryMap = VirtualMemoryTable; +} diff --git a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5sSec.c b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5sSec.c new file mode 100644 index 000000000..d9d3ff731 --- /dev/null +++ b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA5s/CTA5sSec.c @@ -0,0 +1,74 @@ +/** @file +* +* Copyright (c) 2011, ARM Limited. All rights reserved. +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#include <Library/IoLib.h> +#include <Library/ArmPlatformLib.h> +#include <Library/DebugLib.h> +#include <Library/PcdLib.h> +#include <Drivers/PL310L2Cache.h> +#include <Drivers/SP804Timer.h> +#include <ArmPlatform.h> + +/** + Initialize the Secure peripherals and memory regions + + If Trustzone is supported by your platform then this function makes the required initialization + of the secure peripherals and memory regions. + +**/ +VOID +ArmPlatformTrustzoneInit ( + VOID + ) +{ + // No TZPC or TZASC on RTSM to initialize +} + +/** + Initialize controllers that must setup at the early stage + + Some peripherals must be initialized in Secure World. + For example, some L2x0 requires to be initialized in Secure World + +**/ +VOID +ArmPlatformSecInitialize ( + VOID + ) +{ + // Configure periodic timer (TIMER0) for 1MHz operation + MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER0_TIMCLK); + // Configure 1MHz clock + MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER1_TIMCLK); + // Configure SP810 to use 1MHz clock and disable + MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER2_EN, SP810_SYS_CTRL_TIMER2_TIMCLK); + // Configure SP810 to use 1MHz clock and disable + MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER3_EN, SP810_SYS_CTRL_TIMER3_TIMCLK); +} + +/** + Call before jumping to Normal World + + This function allows the firmware platform to do extra actions before + jumping to the Normal World + +**/ +VOID +ArmPlatformSecExtraAction ( + IN UINTN MpId, + OUT UINTN* JumpAddress + ) +{ + *JumpAddress = PcdGet32(PcdFvBaseAddress); +} |