ArmPlatformPkg: Introduce Primary core macros

On MpCore system, the primary core can now be any core of the system.

To identify the primary core, you can use 'gArmTokenSpaceGuid.PcdArmPrimaryCoreMask'
and 'gArmTokenSpaceGuid.PcdArmPrimaryCore'.
These PCDs by default use the ClusterId and CoreId to identify the core. And the
primary core is defined as the ClusetrId=0 and CoreId=0.

The helper macros are: IS_PRIMARY_CORE(MpId), GET_CORE_ID(MpId), GET_CLUSTER_ID(MpId),
GET_CORE_POS(MpId), PRIMARY_CORE_ID.



git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk@12412 6f19259b-4bc3-4df7-8a09-765794883524

1 files changed, 9 insertions, 11 deletions

diff --git a/edk2/ArmPlatformPkg/Sec/Sec.c b/edk2/ArmPlatformPkg/Sec/Sec.c
index 5610168df..6f4738fd4 100644
--- a/edk2/ArmPlatformPkg/Sec/Sec.c
+++ b/edk2/ArmPlatformPkg/Sec/Sec.c
@@ -26,8 +26,6 @@
 #include <Chipset/ArmV7.h>
 #include <Library/ArmGicLib.h>
 
-#define ARM_PRIMARY_CORE  0
-
 #define SerialPrint(txt)  SerialPortWrite ((UINT8*)txt, AsciiStrLen(txt)+1);
 
 extern VOID *monitor_vector_table;
@@ -66,7 +64,7 @@ copy_cpsr_into_spsr (
 
 VOID
 CEntryPoint (
-  IN  UINTN                     CoreId
+  IN  UINTN                     MpId
   )
 {
   CHAR8           Buffer[100];
@@ -74,7 +72,7 @@ CEntryPoint (
   UINTN           JumpAddress;
 
   // Primary CPU clears out the SCU tag RAMs, secondaries wait
-  if (CoreId == ARM_PRIMARY_CORE) {
+  if (IS_PRIMARY_CORE(MpId)) {
     if (FixedPcdGet32(PcdMPCoreSupport)) {
       ArmInvalidScu();
     }
@@ -118,7 +116,7 @@ CEntryPoint (
     ArmEnableVFP();
   }
 
-  if (CoreId == ARM_PRIMARY_CORE) {
+  if (IS_PRIMARY_CORE(MpId)) {
     // Initialize peripherals that must be done at the early stage
     // Example: Some L2x0 controllers must be initialized in Secure World
     ArmPlatformSecInitialize ();
@@ -138,18 +136,18 @@ CEntryPoint (
   if (ArmPlatformTrustzoneSupported()) {
     if (FixedPcdGet32(PcdMPCoreSupport)) {
       // Setup SMP in Non Secure world
-      ArmSetupSmpNonSecure (CoreId);
+      ArmSetupSmpNonSecure (GET_CORE_ID(MpId));
     }
 
     // Enter Monitor Mode
-    enter_monitor_mode((VOID*)(PcdGet32(PcdCPUCoresSecMonStackBase) + (PcdGet32(PcdCPUCoreSecMonStackSize) * CoreId)));
+    enter_monitor_mode ((VOID*)(PcdGet32(PcdCPUCoresSecMonStackBase) + (PcdGet32(PcdCPUCoreSecMonStackSize) * GET_CORE_POS(MpId))));
 
     //Write the monitor mode vector table address
     ArmWriteVMBar((UINT32) &monitor_vector_table);
 
     //-------------------- Monitor Mode ---------------------
     // Setup the Trustzone Chipsets
-    if (CoreId == ARM_PRIMARY_CORE) {
+    if (IS_PRIMARY_CORE(MpId)) {
       ArmPlatformTrustzoneInit();
 
       // Wake up the secondary cores by sending a interrupt to everyone else
@@ -193,12 +191,12 @@ CEntryPoint (
     // security state (SCR_AW), CPSR.F modified in any security state (SCR_FW)
     ArmWriteScr(SCR_NS | SCR_FW | SCR_AW);
   } else {
-    if (CoreId == ARM_PRIMARY_CORE) {
+    if (IS_PRIMARY_CORE(MpId)) {
       SerialPrint ("Trust Zone Configuration is disabled\n\r");
     }
 
     // Trustzone is not enabled, just enable the Distributor and CPU interface
-    if (CoreId == ARM_PRIMARY_CORE) {
+    if (IS_PRIMARY_CORE(MpId)) {
       ArmGicEnableDistributor (PcdGet32(PcdGicDistributorBase));
     }
     ArmGicEnableInterruptInterface (PcdGet32(PcdGicInterruptInterfaceBase));
@@ -210,7 +208,7 @@ CEntryPoint (
   }
 
   JumpAddress = PcdGet32 (PcdNormalFvBaseAddress);
-  ArmPlatformSecExtraAction (CoreId, &JumpAddress);
+  ArmPlatformSecExtraAction (MpId, &JumpAddress);
 
   return_from_exception (JumpAddress);
   //-------------------- Non Secure Mode ---------------------