diff options
author | Ryan Harkin <ryan.harkin@linaro.org> | 2014-06-27 13:36:54 +0100 |
---|---|---|
committer | Ryan Harkin <ryan.harkin@linaro.org> | 2014-06-27 14:18:41 +0100 |
commit | 0671f50c9622d428d2b147a8fa03d4f5cbaabbc5 (patch) | |
tree | 495c3a035bdaf6744e8f73d932e898291c423026 | |
parent | 23693b93c2d8b9d1e57c92e64043a892a20fb94a (diff) |
14.06: updates to binary image installation from Andy
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
-rw-r--r-- | android/images/armv8-android-juno-lsk/HOWTO_install.txt | 6 | ||||
-rw-r--r-- | android/images/armv8-juice-juno-lsk/HOWTO_install.txt | 6 | ||||
-rw-r--r-- | openembedded/juno-lsk/INSTALL.textile | 6 |
3 files changed, 9 insertions, 9 deletions
diff --git a/android/images/armv8-android-juno-lsk/HOWTO_install.txt b/android/images/armv8-android-juno-lsk/HOWTO_install.txt index b887e76..c56e653 100644 --- a/android/images/armv8-android-juno-lsk/HOWTO_install.txt +++ b/android/images/armv8-android-juno-lsk/HOWTO_install.txt @@ -95,12 +95,12 @@ h2. Booting the image After the media create tool has finished executing, remove the USB drive from your PC and insert it into the board. -Before you can boot the image you will need to install the latest "firmware":#firmware on the board. The "instructions below":#firmware provide information on how to do this. +Before you can boot the image you will need to install the latest firmware on the board. The "instructions below":#firmware provide information on how to do this. See the "UEFI wiki":https://wiki.linaro.org/ARM/UEFI#Configure_UEFI for more information on how to configure UEFI to boot disk images. In general terms, you use the UEFI Boot Manager to configure the "Boot Device": -* select USB device's boot partition after selecting option "@[1] Add Boot Device Entry@", then: +* select USB device's boot partition after selecting option @"[1] Add Boot Device Entry"@, then: bc. File path of the EFI Application or the kernel: kernel Has FDT support? [y/n] y @@ -117,7 +117,7 @@ h2. DS-5 Configuration Files for Juno As an optional step, you may wish to install DS-5 configuration files that will allow you to debug Juno. The procedure is as follows: -1. Extract the DS-5 config files anywhere on your host PC. +1. Extract the "DS-5 config files":https://wiki.linaro.org/ARM/Juno?action=AttachFile&do=get&target=DS-5_config.zip anywhere on your host PC. 2. Start DS-5 and select "Preferences" from the "Window" menu. diff --git a/android/images/armv8-juice-juno-lsk/HOWTO_install.txt b/android/images/armv8-juice-juno-lsk/HOWTO_install.txt index e3bc405..0b2be7d 100644 --- a/android/images/armv8-juice-juno-lsk/HOWTO_install.txt +++ b/android/images/armv8-juice-juno-lsk/HOWTO_install.txt @@ -95,12 +95,12 @@ h2. Booting the image After the media create tool has finished executing, remove the USB drive from your PC and insert it into the board. -Before you can boot the image you will need to install the latest "firmware":#firmware on the board. The "instructions below":#firmware provide information on how to do this. +Before you can boot the image you will need to install the latest firmware on the board. The "instructions below":#firmware provide information on how to do this. See the "UEFI wiki":https://wiki.linaro.org/ARM/UEFI#Configure_UEFI for more information on how to configure UEFI to boot disk images. In general terms, you use the UEFI Boot Manager to configure the "Boot Device": -* select USB device's boot partition after selecting option "@[1] Add Boot Device Entry@", then: +* select USB device's boot partition after selecting option @"[1] Add Boot Device Entry"@, then: bc. File path of the EFI Application or the kernel: kernel Has FDT support? [y/n] y @@ -117,7 +117,7 @@ h2. DS-5 Configuration Files for Juno As an optional step, you may wish to install DS-5 configuration files that will allow you to debug Juno. The procedure is as follows: -1. Extract the DS-5 config files anywhere on your host PC. +1. Extract the "DS-5 config files":https://wiki.linaro.org/ARM/Juno?action=AttachFile&do=get&target=DS-5_config.zip anywhere on your host PC. 2. Start DS-5 and select "Preferences" from the "Window" menu. diff --git a/openembedded/juno-lsk/INSTALL.textile b/openembedded/juno-lsk/INSTALL.textile index 5e022ce..31ae5b9 100644 --- a/openembedded/juno-lsk/INSTALL.textile +++ b/openembedded/juno-lsk/INSTALL.textile @@ -96,12 +96,12 @@ h2. Booting the image After the media create tool has finished executing, remove the USB drive from your PC and insert it into the board. -Before you can boot the image you will need to install the latest "firmware":#firmware on the board. The "instructions below":#firmware provide information on how to do this. +Before you can boot the image you will need to install the latest firmware on the board. The "instructions below":#firmware provide information on how to do this. See the "UEFI wiki":https://wiki.linaro.org/ARM/UEFI#Configure_UEFI for more information on how to configure UEFI to boot disk images. In general terms, you use the UEFI Boot Manager to configure the "Boot Device": -* select USB device's boot partition after selecting option "@[1] Add Boot Device Entry@", then: +* select USB device's boot partition after selecting option @"[1] Add Boot Device Entry"@, then: bc. File path of the EFI Application or the kernel: Image Has FDT support? [y/n] y @@ -117,7 +117,7 @@ h2. DS-5 Configuration Files for Juno As an optional step, you may wish to install DS-5 configuration files that will allow you to debug Juno. The procedure is as follows: -1. Extract the DS-5 config files anywhere on your host PC. +1. Extract the "DS-5 config files":https://wiki.linaro.org/ARM/Juno?action=AttachFile&do=get&target=DS-5_config.zip anywhere on your host PC. 2. Start DS-5 and select "Preferences" from the "Window" menu. |