From 5b08e594ab07622ffdd882672b1fedd37b804585 Mon Sep 17 00:00:00 2001 From: Ryan Harkin Date: Wed, 25 Jun 2014 11:45:17 +0100 Subject: 14.06: remove HTML control codes Signed-off-by: Ryan Harkin --- android/images/armv8-android-juno-lsk/HOWTO_gettingstarted.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'android/images/armv8-android-juno-lsk/HOWTO_gettingstarted.txt') diff --git a/android/images/armv8-android-juno-lsk/HOWTO_gettingstarted.txt b/android/images/armv8-android-juno-lsk/HOWTO_gettingstarted.txt index 844917e..ebc0a93 100644 --- a/android/images/armv8-android-juno-lsk/HOWTO_gettingstarted.txt +++ b/android/images/armv8-android-juno-lsk/HOWTO_gettingstarted.txt @@ -157,11 +157,11 @@ The Mali GPU in Juno is able to use a variety of texture compression formats, ma 3.      Connect the 12 volt power supply to the board. -The serial terminal will show the command prompt Cmd>; +The serial terminal will show the command prompt Cmd> -4.      At the Cmd>; prompt on the serial terminal, issue the command usb_on +4.      At the Cmd> prompt on the serial terminal, issue the command usb_on -bc. Cmd>; usb_on +bc. Cmd> usb_on The configuration flash memory should now be visible on the host computer as a mass storage device. @@ -171,7 +171,7 @@ The configuration flash memory should now be visible on the host computer as a m 7.      In the [SCC REGISTERS] section, below the “TOTALSCCS” line, insert the following line: -SCC: 0x05C ;           ;Optional comment to explain which texture you have enabled +SCC: 0x05C            ;Optional comment to explain which texture you have enabled 8.      Update the TOTALSCCS count (increment it by one) so that it now reflects the total number of SCC registers that are programmed. -- cgit v1.2.3