diff options
| author | Ryan Harkin <ryan.harkin@linaro.org> | 2014-06-25 11:45:17 +0100 |
|---|---|---|
| committer | Ryan Harkin <ryan.harkin@linaro.org> | 2014-06-25 11:45:17 +0100 |
| commit | 5b08e594ab07622ffdd882672b1fedd37b804585 (patch) | |
| tree | 073a7b90bdf444d77dfae187edf772349ad091e5 /openembedded/juno-lsk/INSTALL.textile | |
| parent | c2f5c85098b9f8661aa7d69896e581b5d3029ce4 (diff) | |
14.06: remove HTML control codes
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Diffstat (limited to 'openembedded/juno-lsk/INSTALL.textile')
| -rw-r--r-- | openembedded/juno-lsk/INSTALL.textile | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/openembedded/juno-lsk/INSTALL.textile b/openembedded/juno-lsk/INSTALL.textile index 90990a7..ab7baa1 100644 --- a/openembedded/juno-lsk/INSTALL.textile +++ b/openembedded/juno-lsk/INSTALL.textile @@ -138,11 +138,11 @@ To carry out a system recovery or update the MCC firmware, follow these steps: 3. Connect the 12 volt power supply to the board. -The serial terminal will show the command prompt Cmd>; +The serial terminal will show the command prompt Cmd> -4. At the Cmd>; prompt on the serial terminal, issue the command usb_on +4. At the Cmd> prompt on the serial terminal, issue the command usb_on -bc. Cmd>; usb_on +bc. Cmd> usb_on The configuration flash memory should now be visible on the host computer as a mass storage device. |